Ball Valve Catalogue o5c3o

®

BALL VALVE CATALOGUE //

The Fort Vale Range of Ball Valves

CATALOGUE REVISION_01-27.01.15 © Fort Vale Engineering Ltd. 2015

THIS PAGE IS INTENTIONALLY BLANK

BALL VALVE CATALOGUE //

CONTENTS //

PAGE

AIRLINE BALL VALVES // » 25mm PFA Lined Flanged Blacko Airline Ball Valve

1

» 1½” BSP Blacko Airline Ball Valve » 1½” Dual Fitting Blacko Airline Ball Valve » 1½” Flanged Blacko Airline Ball Valve

2 3 4

» 2” Blacko Ball Valve - Slotted Outlet (This valve may also be used as a discharge valve) » 2” Pneumatically Actuated Blacko Airline Ball Valve » Airline Valve Weld-in Flanges » Airline Valve Installation & Conversion Kits

5 6/7 8 9

DISCHARGE BALL VALVES // » 50mm PFA Lined Flanged Ball Valve

10

» 2” Blacko Ball Valve - Slotted Outlet (See Airline Section) » 2” Ball Valve - H2O2 Specification » 2” Blacko Ball Valve - Offshore Specification » 2” Full Bore Ball Valve - Gas Specification

5 11 12 14/15

» 80mm PFA Lined Flanged Ball Valve

16/17

» 3” Blacko Ball Valve - 3" BSP Outlet » 3” Blacko Ball Valve - Slotted Outlet

18/19 20/21

» 4" Ball Valve - Rail Specification

22/23

» Socket / In-Line Ball Valves

24

FIRESAFE & LETHAL SERVICE BALL VALVES // ®

» » » »

1" Firesafe / Lethal Service Ball Valve 2" Firesafe / Lethal Service Ball Valve 2" Firesafe Only Ball Valve 3" Firesafe / Lethal Service Ball Valve © Fort Vale Engineering Ltd. 2015

26/27 28/29 30/31 32/33 BALL_CONTENTS REV01-27.01.15

®

Data

PFA Lined 25mm Reduced Bore Flanged Airline Ball Valve PFA Lined 25mm Reduced Bore Flanged Airline Ball Valve - inlet flange drilled 4 x 18mm slots on a 100mm to 125mm PCD; outlet flange (tank connection) drilled 4 x 11mm holes on a 103.5mm PCD. Valve manufactured in stainless steel with PTFE main seal. All parts in with the cargo lined with PFA. Options - range of PFA lined ball valves (See RANGE)

Fitting Details

Specification Weight Design Pressure (MAWP) Test Pressure Design Temperature Range

Part number : 530/P100 Ø 152.0 Ø 38.1

80.5

Ø 80.4

5.3 Kg 6.9 Bar (100 PSI) 10.3 Bar (150 PSI) -40°C to +200°C -40°F to +392°F

23.6

Valve complies with EN14432:2006 and RID norms. Ø 78.0 Ø 127.0

Range

Ø 25.0

Description

530/P100 370/P100 360/P030X

25mm PFA lined reduced bore ball valve 50mm PFA lined full bore ball valve 80mm PFA lined full bore ball valve

OUTLET 4 HOLES Ø 11.0 EQUI-SPACED ON A 103.5 PCD.

Associated Parts

108.9

Part No. INLET 4 SLOTS Ø 18.0 EQUI-SPACED ON A 100 TO 125 PCD.

45°

Part No.

Associated Parts

350/0024 355/1250 530/8053CM 5005-348 311/3510

Tank weld-in pad Stud kit Blind flange Solid PTFE outlet gasket Bolting kit

Parts drawing 1 2

3

4

5 6 7 8 9

Item

Description

Part No.

1 2 3 4 5 6 7 8 9 10 11 12 13

M5 socket screw Retaining washer Handle M6 button screw (4) Stuffing clamp Seal carrier for lining Perfluoroelastomer O ring Perfluoroelastomer O ring Fortyt O ring PFA lined body PFA lined ball & stem PFA lined clamp plate PTFE front & rear seal (2)

5111-111 20370/5 530/0020/1 5121-013 530/1014 530/1013 5005-586 5005-384 5005-601 530/P110 530/1010L 530/1011PL 530/0024

10 11

12

13 © Fort Vale Engineering Ltd. 2014

Page 1

BALL024 REV04-26.06.14

®

1½” Blacko Airline Ball Valve

Data

1½” Airline Ball Valve - 1 ½” BSP male inlet. Complete with pressure gauge connection and TIR facility to handle. parts manufactured in 316 stainless steel with PTFE seals. Optional extras - gauge guard and/or gauze filter, ¼” BSP plug with TIR wire.

Specification

Fitting Details Part Number : 530/0000 59.7

Weight Design Pressure Test Pressure Design Temperature

2.9 Kg MAWP 10 Bar (145 PSIG) 21.4 Bar (310 PSIG) -55°C to 205°C (-67°F to 401°F)

Approved to BS EN14432. 167.2

Ø 38.4 Ø 29.3

Range

11.9

86.9

Part No. 530/0000 530/0000F 530/0000G Ø 29.3

530/0000FG

96.8 (SQUARE) 73.2 (SQUARE)

530/0000W

Description 1½” BSP inlet standard valve. 1½” BSP inlet valve with gauze. 1½” BSP inlet valve with gauze guard. 1½” BSP inlet valve with gauze and gauze guard. 1½” BSP inlet valve with ¼” BSP plug and TIR wire.

Associated Parts ¼” BSP GAUGE CONNECTION

4 HOLES 10.8 THRO EQUI-SPACED AS SHOWN ON A 103.5 PCD

Associated Parts Gauge Gauge Adaptor 1½” BSP Dust Cap Stud Kit Tank Pad

Part No. 920/07BBSP 352/4004 10300PS 350/1300 350/0025

Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Part No. 5112-031 5113-005 531/0025 5005-008 5120-017 353/0010 530/0100 530/0040 5005-048 5128-005 5005-006 350/0002 5005-007 530/0001 5003-002 530/0003 5113-036

Parts drawing 1 2

17

3

16 4 5 15 6 14

7 8

9

11

10

Description Self-locking nut M8 washer Handle PTFE O ring (2) Snap ring (optional suffix ‘F’) Gauze filter (optional suffix ‘F’) Valve body Gauge guard (optional suffix ‘G’) PTFE O ring ¼” BSP plug Front ball seal Ball Rear ball seal Spindle PTFE washer Stuffing boss (2) Disc spring

12 13

Repair Kits: Items marked included in Repair Kit - 530/00RK Seal Kits: Items marked included in Seal Kit - 530/00SK © Fort Vale Engineering Ltd. 2016

Page 2

BALL002 REV07-29.03.16

1½” Dual Fitting Blacko Airline Ball Valve

Data TM

1½” Dual Inlet Airline Ball Valve - 1½” BSP and 1½” NPT male inlet connections. Complete with pressure gauge connection and TIR facility to handle. parts manufactured in 316 stainless steel with PTFE seals. Optional extras - gauge guard and/or gauze filter.

Specification

Fitting Details Part Number : 530/0300

Weight Design Pressure Test Pressure Design Temperature

73.1 (2.88")

5.25 Kg MAWP 10 Bar (145 PSIG) 21.4 Bar (310 PSIG) -55°C to 205°C (-67°F to 401°F)

Approved to BS EN14432. 94.0 (3.70")

96.7 (3.81")

4 HOLES 10.7 DIA THRO 0.42"

Range Type

Gauze

1½”BSP-1½”NPT 1½”BSP-1½”NPT 1½”BSP-1½”NPT 1½”BSP-1½”NPT

Without With With Without

Gauge Guard

Part No.

Without Without With With

530/0300 530/0300F 530/0300FG 530/0300G

85.85 (3.38”)

167.4 (6.59")

139.7 (5.50")

Associated Parts

¼" BSP GAUGE CONNECTION

124.97 (4.92”)

Associated Parts Gauge Gauge Adaptor BSP Cap NPT Cap Stud Kit Tank Pad

Part No. 920/07BBSP 352/4004 10300PS 10300PNT 350/1300 350/0025

Parts drawing Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 16 2 15

14

13 3 12 11 4 5

10

6

9 8

Description M8 washer Handle PTFE O ring (2) Valve body Gauge guard (optional suffix ‘G’) PTFE O ring ¼” BSP plug Rear ball seal Ball Gauze filter (optional suffix ‘F’) Front ball seal Spindle Stuffing boss (2) PTFE washer Disc spring Self-locking nut

Part No. 5113-005 530/0020 5005-008 530/0301 530/0040 5005-048 5128-005 5005-007 350/0002 353/0010 5005-006 530/0001 530/0003 5003-002 5113-036 5112-031

7

Repair Kits: Items marked included in Repair Kit - 530/00RK Seal Kits: Items marked included in Seal Kit - 530/00SK © Fort Vale Engineering Ltd. 2011

Page 3

BALL001 REV05-06.10.11

1½” Flanged Blacko Airline Ball Valve

®

Data

1½” Flanged Airline Ball Valve - inlet flange slotted to 1½” BSTD/1½” ASA 150. Complete with pressure gauge connection, gauge guard and TIR facility to handle. parts manufactured in 316 stainless steel with PTFE seals. Optional extra - gauze filter.

Fitting Details

Specification Weight Design Pressure (MAWP) Test Pressure Design Temperature

Part Number : 530/1000

3.7 Kg 7 Bar (101 PSIG) 15 Bar (217 PSIG) -55°C to 205°C (-67°F to 401°F)

74.4 (2.93")

Approved to BS EN14432.

Range

1 " BSP GAUGE CONNECTION 4

167.4 (6.59”)

96.8 (3.81")

94.0 (3.70")

152.4 (6.00") DIA

73.1 (2.88")

Inlet Flange

Gauze

TIR

Gauge Guard

Part No.

1½”BSTD/ASA 1½”BSTD/ASA

Without With

Standard Standard

Standard Standard

530/1000 530/1000F

Associated Parts Associated Parts Blind Flange Bolting Kit Gasket Stud Kit Tank Pad

4 HOLES 10.7 (0.42")

4 SLOTS 18.0mm DIA THRO' EQUI-SPACED ON 3.874" I/D PCD (98.4mm PC) ISO 9669

Part No. 530/8053CM 311/3500 5005-348 350/1300 350/0025

Parts drawing 16

Item

1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

2 15 14

3

13 4 12

5

11

10 9

8

Description Self locking nut Handle Snap ring (optional suffix ‘F’) Valve body Gauge filter (optional suffix ‘F’) ¼” BSP plug PTFE O ring Ball Front ball seal Rear ball seal Spindle PTFE O ring (2) Stuffing boss (2) PTFE washer Disc spring M8 washer

Part No. 5112-031 530/0020 5120-017 530/1100 353/0010 5128-005 5005-048 350/0002 5005-006 5005-007 530/0001 5005-008 530/0003 5003-002 5113-036 5113-005

6 7

Repair Kits: Items marked included in Repair Kit - 530/00RK (item 6 x2) Seal Kits: Items marked included in Seal Kit - 530/00SK © Fort Vale Engineering Ltd. 2012

Page 4

BALL003 REV05-27.09.12

Data

2” Full Bore Blacko Ball Valve TM

2” Full Bore Blacko Ball Valve - inlet flange drilled 4 x 18mm holes on a 125mm PCD (DIN50 PN16); outlet flange with 4 x 18mm open slots on a 120.7mm minimum diameter to suit 2” ASA150 and DIN50 PN40. Left hand operated with TIR facility to handle. parts manufactured in 316 stainless steel with PTFE seals. Options - Full range of air inlet and discharge ball valves available, both manually and mechanically actuated. Steam-heated version.

Specification

Fitting Details Part number : 370/0100

Weight Design Pressure (MAWP) Hydraulic Test Pressure Design Temperature Range

94.6

190.5

5.5 Kg 7 Bar (101.5 PSI) 15 Bar (217.5 PSI) -40°C to 205°C (-40° F to 400°F)

45°

4 HOLES Ø17.8 EQUI-SPACED ON A 125.0 PCD.

14.0

Ø165.1

Ø50.0

Ø50.0

4 SLOTS Ø17.8 EQUI-SPACED ON A 120.7 MIN PCD.

Ø85.1 Ø67.9

Design Approval by Lloyds of Shipping Approved to BS EN14432

Range Part No.

Description

370/0100SH 370/0140 370/0150 370/0180

c/w steam heating provision c/w DN80 inlet adaptor & outlet blind flange c/w 2” BSP outlet spigot flange c/w outlet blind flange

Associated Parts Ø165.1

Recommended bolt torque 81 Nm (60 Lb/ft)

Associated Parts

Part No.

Tank weld-in pad Stud kit Outlet gasket Blind flange Bolting kit

355/3100 311/3700 5005-361 370/4239CM 311/3500

Parts drawing 1 2

3

4

5 6 7

8

Item

Description

Part No.

1 2 3 4 5 6 7 8 9 10 11 12 13

M10 self lock nut M10 plain washer Handle 16mm Belleville washer (3) Stuffing collar PTFE O ring Bottom bearing Spindle Stop bolt 2” ballvalve body PTFE seal 50mm ball PTFE seal

5112-008 5113-009 370/0125 5113-038 370/0103 5005-688 370/0104 370/0120 370/0107 370/0110 370/0102 370/3301 370/0105

9 10

13

SEAL KIT Part number 370/01SK contains all parts marked

12 11

© Fort Vale Engineering Ltd. 2012

Page 5

BALL019 REV04-04.10.12

®

Data

2” Pneumatic Blacko Ball Valve 2” Pneumatically Operated Air Inlet Ball Valve - inlet flange drilled 4 x 18mm holes on a 125mm PCD; outlet flange 4 x 18mm open slots on a 120.7mm minimum PCD to suit 2” ASA 150/DIN50 PN40. Valve manufactured in 316 stainless steel with PTFE seals. Fitted with Kinetrol pneumatic actuator with spring return. Options - Full range of manually operated air inlet valves available.

Specification Weight Design Pressure (MAWP) Test Pressure Design Temperature: Valve Kinetrol Actuator

Range 8 Kg 7 Bar (101.5 PSI) 15 Bar (217.5 PSI) -40°C to 205°C (-40°F to 400°F) -20°C to 80°C (-4°F to 176°F)

Part No.

Description

370/0100PN 370/0100

2” pneumatic Blacko ball valve 2” manually operated Blacko ball valve

Associated Parts

Ball valve approved to BS EN 14432.

Associated Parts

Part No.

Mating flange Tank weld-in pad Stud kit Outlet gasket Blind flange Bolting kit

294/0082 355/3100 311/3700 5005-361 370/4239CM 311/3000

Fitting Details Part Number : 370/0100PN

Ø 165.1 Ø 97.5 STD SERRATIONS

Ø 32.6

Ø 111.0

Ø 72.2

Ø 50.0

Ø 50.0

Ø 165.1

Ø 85.1

134.6

4 HOLES Ø 17.8MM EQUI-SPACED ON A 125MM PCD

4 OPEN SLOTS Ø17.8MM EQUI-SPACED ON A 120.7MM MIN.PCD

© Fort Vale Engineering Ltd. 2012

Page 6

BALL016 REV01-01.10.12

®

2” Pneumatic Blacko Ball Valve

Data Parts drawing

1

19 14 16 11

13

18

17

15

12 5 2

6 7 8

3 9

10

4

Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Description Body PTFE front seal Ø50mm ball PTFE rear seal Spindle PTFE O ring Belleville washer (3) Spline adaptor assembly M6 spring washer (4) M6 hex bolt (4) Kinetrol pneumatic actuator Mounting bracket M5 spring washer (6) M5 hex bolt (6) M10 self lock nut M10 plain washer Stuffing collar Bottom bearing bush Spacer boss (4)

Part No. 370/0110 370/0102 370/3301 370/0105 370/0120 5005-688 5113-038 370/0164 5113-008 5111-076 5127-052 370/0108 5113-023 5111-072 5112-008 5113-009 370/0103 370/0104 370/0163

SEAL KIT Part number 370/01SK contains all parts marked

© Fort Vale Engineering Ltd. 2012

Page 7

BALL017 REV01-01.10.12

®

Data Part Number : 350/0025 Tank weld-in flange to suit 1½” Blacko airline ball valve. Manufactured in 316 stainless steel.

Airline Valve Ancillaries Tank Weld-in Flanges Fitting Details

Ø127.0

22.4

Ø57.2 SERRATIONS

4 X M10 HOLES EQUI-SPACED ON A 103.4 PCD

Part Number : 355/1000 Tank weld-in flange to suit 2” BSP airline butterfly valve. Manufactured in 316 stainless steel.

Ø31.8

Fitting Details

Ø127.0 Ø76.2 SERRATIONS

22.4

Ø48.8

4 X M10 HOLES EQUI-SPACED ON A 100.0 PCD

Part Number : 355/3100 Tank weld-in flange to suit 2” flanged airline butterfly valve. Manufactured in 316 stainless steel.

Fitting Details

Ø165.1 Ø88.9 SERRATIONS

29.2

Ø48.8

4 X M16 HOLES EQUISPACED ON A 125.0 PCD.

© Fort Vale Engineering Ltd. 2012

Page 8

BALL004 REV01-26.09.12

UK Tel : +44 (0)1282 687100 UK Fax: +44 (0)1282 687110 [email protected]

Spares

NL Tel : +31 180 483333 NL Fax: +31 180 410797 [email protected]

TM

Airline Valve Installation 1½” Airline Ball Valves Bolt Kit 311/3500 1½" BSP Dust Cap 10300PS

Blind Flange 530/8053CM Gasket 5005-348 1½" BSP Cap 10300PS

1½" BSP Airline Ball Valve 530/0000

1½" NPT Cap 10300PNT

1½" Flanged Airline Ball Valve 530/1000 1½" BSP Dual Fitting Airline Ball Valve 530/0300 Stud Kit 350/1300

Tank Pad 350/0025

1½” BSP to DIN Adaptor Flange Conversion Kits To convert a 1½” BSP Blacko airline ball valve to a DIN40 or a DIN50 flanged connection. Kit includes BSP to DIN adaptor flange, bent handle, envelope gasket, blind flange and bolting kit. Adaptor flange available separately. Note : Airline ball valve not included.

Description

Part No.

1½” BSP to DIN 40 conversion kit 1½” BSP to DIN 40 adaptor flange only 1½” BSP to DIN 50 conversion kit 1½” BSP to DIN 50 adaptor flange only

530/ADAP40KIT 530/ADAP40 530/ADAP50KIT 530/ADAP50

© Fort Vale Engineering Ltd. 2013

Page 9

SPA042 REV04-13.06.13

PFA Lined 50mm Full Bore Flanged Ball Valve

®

Data

PFA Lined 50mm Full Bore Flanged Ball Valve - inlet flange drilled 4 x 18mm holes on a 126mm PCD; outlet flange drilled 4 x 18mm slots on a 120.7mm to 127mm PCD. Valve manufactured in stainless steel with PTFE main seal. All parts in with the cargo lined with PFA. Options - range of PFA lined ball valves (See RANGE)

Fitting Details

Specification

Part number : 370/P100 223.9

Ø 165.0 Ø 100.6

21.0

Ø 50.0

Weight Design Pressure (MAWP) Test Pressure Design Temperature Range

12.15 Kg 6.9 Bar (100 PSI) 10.3 Bar (150 PSI) -40°C to 200°C (-40°F to 392°F)

67.0

131.0

Valve complies with EN14432 and RID norms.

Range Ø 105.0 Ø 165.0

Ø 50.7

Part No. 530/P100 370/P100 360/P030X

67.0

45°

4 SLOTS Ø18 EQUI-SPACED ON A 120.7 TO 127.0 PCD

Description 25mm PFA lined reduced bore ball valve 50mm PFA lined full bore ball valve 80mm PFA lined full bore ball valve

142.9

Associated Parts Part No. 311/3790 311/3590 370/4239PFA

Associated Parts Stud kit Bolting kit PFA lined blind flange

Fitting Details 1 2

3 17 4

5 6 7 8 10 9 16

15

Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Description M5 screw Retaining washer Handle Stop pin (2) Stuffing plate Seal carrier Viton O ring Viton O ring Perfluoroelastomer O ring PFA lined body PTFE ball seal (2) Fortyt O ring (2) PFA lined obturator M8 cap screw (4) PFA lined clamp plate Perfluoroelastomer O ring (2) M6 cap screw (2)

Part No. 5111-113 20370/5 370/3306/1 370/P107 370/P114 370/P113 ORB115VL ORB121VL 5005-214PER 370/P110 370/P115 ORM0580400F0 370/P101 5111-010 370/P111 5005-370P 5111-015

14

SEAL KIT Part number 370/P100SK contains all parts marked 12

11

13

© Fort Vale Engineering Ltd. 2017

Page 10

BALL027 REV05-24.04.17

2” Full Bore Ball Valve - Hydrogen Peroxide

®

Data

2” Full Bore Ball Valve - for Hydrogen Peroxide tank specification. Inlet drilled 6 x 14mm holes on a 168mm PCD. Outlet drilled 4 x 18mm slots to suit 2” ASA 150, 2” BSTD and DIN 50 PN 10. The inlet flange is specially designed to fit a standard 3” top discharge pad to ensure interchangeability with the Fort Vale 3” flanged butterfly valve. The ball valve body has a ¼” BSP connection to accept a pressure gauge and the ball incorporates a bleed hole to facilitate monitoring the tank pressure at all times. parts manufactured in 316 stainless steel with PTFE seals. Options - other inlet flanges available.

Specification

Fitting Details Example shown : 370/0140 190.5

Weight Design Pressure Hydraulic Test Pressure Design Temperature

Ø50.0

94.6

121.6

6 HOLES Ø14MM SPACED AS SHOWN ON A 168.3 PCD

32.5

4 HOLES Ø18MM EQUI-SPACED ON A 125.0 PCD BLANKING FLANGE

35°

35°

Approved to BS EN14432

Range

4 SLOTS Ø18MM EQUI-SPACED ON A 114.3 TO 125.0 PCD

55°

13.9 Kg 7 Bar (101.5 PSI) 15 Bar (217.5 PSI) -40°C to 205°C (-40°F to 400°F)

1/4"BSP

Different inlet flange configurations are available upon request.

60.2

Associated Parts

72.1

97.6

12.7

11.3

Ø200.0 Ø140.0 SERRATIONS

Part No.

Associated Parts

368/0800 5005-222P 368/0810 5005-169 312/1000

Tank weld-in pad Solid PTFE gasket Syphon tube stub pipe assembly CNAF/PTFE envelope gasket Stud kit

Parts drawing Item 1 2 3

Description

Part No.

Item

M10 self locking nut M10 washer Handle

5112-008 5113-009 370/0125

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

1 20 2

21

3 4 5 6 7 9

8

11 12 19

Description

Part No.

Belleville washer (3) Stuffing collar PTFE O ring Bottom bearing 2” ball valve spindle Stop screw M16 hex bolt (4) M16 spring washer (8) M16 full nut (8) Blanking flange PTFE gasket ¼” BSP hex head plug 2” ball valve body Rear PTFE ball seal 2” ball Front PTFE ball seal Adaptor flange M16 stud (4)

5113-038 370/0103 5005-688 370/0104 370/0120 370/0107 5111-031 5113-012 5112-003 370/4239 5005-724P 5128-005 370/0115 370/0105 370/3309 370/0102 370/0145 S0600/3

18

SEAL KIT Part no. 370/01SK contains all parts marked

17 16 15

14 13

12 11

© Fort Vale Engineering Ltd. 2013

10

Page 11

BALL012 REV03-19.09.13

®

Data

2” Full Bore Blacko Ball Valve Offshore Specification 2” Full Bore Blacko Ball Valve - inlet flange with 4 open slots to suit 2” BSTD / 2” ASA 150 and DIN50 PN40. Outlet flange with 2” BSP spigot. Left hand operated with TIR facility to handle. parts manufactured in 316 stainless steel with PTFE seals. Options - NPT outlet and cap available.

Specification

Fitting Details Part number : 370/0150 39.6

83.3

7.5 Kg 7 Bar (101.5 PSI) 10.5 Bar (152.25 PSI) -40°C to 205°C (-40°F to 400°F)

Approved to BS EN 14432 Design approval by Lloyds of Shipping.

2” BSP

94.8

4 OPEN SLOTS Ø17.8 THRO EQUI-SPACED WITH A MIN DIA OF 114.3

Weight Design Pressure (MAWP) Hydraulic Test Pressure Design Temperature

Range 4 HOLES Ø17.8 THRO EQUISPACED ON A 125.0 PCD DN50 PN40

Part No.

Outlet

370/0150 370/0150NPT

2” BSP outlet spigot flange 2” NPT outlet and NPT cap

165.1

Associated Parts

165.1

Part No.

Description

355/3100 311/3700 10301PS 10301NPTP

Tank weld-in flange Stud kit 2” BSP blank cap with chain & PTFE seal 2” NPTP blank cap with captivation wire & PTFE seal

Parts drawing SEAL KIT Part number 370/015SK contains all parts marked 1 2

17

3

4

5 7 8

6

9

16 15

Item

Description

Part No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

M10 self lock nut M10 plain washer Handle 16mm Belleville washer (3) Stuffing collar Bottom bearing bush PTFE O ring Spindle Stop bolt 2” ballvalve body PTFE seal (2) 50mm ball Body seal Outlet flange M16 full nut (4) M16 spring washer (4) M16 hexhead setscrew (4)

5112-008 5113-009 370/0125 5113-038 370/0103 370/0104 5005-688 370/0120 370/0107 370/0110 370/0102 370/3301 370/0106 370/0130 5112-003 5113-012 5111-036

14

REPAIR KIT Part number 370/015RK contains all parts marked

13 11 12 11 © Fort Vale Engineering Ltd. 2003

10

Page 12

BALL015 REV02-27.09.12

Page 13

THIS PAGE IS INTENTIONALLY BLANK

2” Full Bore Gas Ball Valve

Data TM

2” Full Bore Gas Ball Valve - DN 50 PN 40 high pressure valve. Flange drilling: 4 x 18mm holes on a 127mm PCD (2” ASA150) and 8 x 18mm holes on a 127mm PCD (2” ASA 300). Right hand operation. parts manufactured in 316 stainless steel with PTFE seals. Options - outlet flange supplied with 1/8” NPT connection to fit bleed valve. Other flange drillings available. Left hand operation.

Specification Weight Design Pressure (MAWP) Service Test Pressure Design Temperature Range

Range 9 Kgs 34.5 Bar (500 PSI) 70 Bar (1015 PSI) -50°C to 80°C (-58°F to 176°F)

Design approval by Lloyds of Shipping and Russian Maritime of Shipping. All valves may be manufactured to TPED.

Part No.

Description

370/3335B 370/3300B 370/3400B

2” ASA 300lb right hand valve DN 50 PN 40 right hand valve DN 50 PN 40 left hand valve

Associated Parts Part No.

Associated Parts

252/2095

Blind flange (2” ASA 300 lbs)

Fitting Details Example shown : 370/3335B

4 HOLES Ø 18.0 EQUI-SPACED ON A 127.0 PCD (5.00”) [2” ASA 150]

150.5 (5.93”) 20.3 (0.80”) 3.0 (0.12”)

Ø 165.1 (6.50”)

Ø 101.4 (3.99”) SERRATIONS

50.0 (1.97”)

Ø 102.1 (4.02”)

Ø 165.1 (6.50”)

138.4 (5.45”)

223.8 (8.81”)

8 HOLES Ø 18.0 EQUI-SPACED ON A 127.0 PCD (5.00”) [2” ASA 300]

61.5 (2.42”)

© Fort Vale Engineering Ltd. 2008

Page 14

GAS025 REV02-10.12.07

2” Full Bore Gas Ball Valve

Data TM

Parts drawing

1

SEAL KIT

2

Part number 370/33SKB contains all parts marked

3

4

5 6

7 8 9 10 11 12

13 14 15 16 17 16 18 19 20 21

A detailed step-by-step maintenance manual is available for our gas ballvalve in both printed and CD formats. Please our Sales team for further information.

© Fort Vale Engineering Ltd. 2008

Item

Description

Part No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

M10 self locking nut M10 washer Handle Disc spring (3) M6 hex head bolt (4) M6 spring washer (4) Clamp plate Neoprene washer Neoprene washer Spindle bush Bottom seal Bottom bush Spindle Ball valve body M12 stud (4) RTFE ball seal (2) 50mm ball Body seal Ball valve body half M12 spring washer (4) M12 full nut (4)

5112-008 5113-009 370/3306 5113-038 5111-022 5113-008 370/3305B 5005-216 5005-866N 370/3307B 359/2007 370/3321 370/3320 370/3365 370/3314 370/3302 370/3301 370/3303 370/3316 5113-010 5112-006

Page 15

GAS026 REV01-02.12.07

PFA Lined 80mm Full Bore Ball Valve

Data TM

PFA Lined 80mm Full Bore Ball Valve - inlet flange drilled 4 x 18mm holes on a 160mm PCD; outlet flange drilled 4 x 18mm slots equi-spaced on a 146 to 160mm PCD. (3” BSTD to DIN80) Left hand operated with TIR to handle. Valve manufactured in stainless steel with PTFE main seal. All parts in with the cargo lined with PFA. Options - right hand operated version. Range of PFA lined ball valves (See RANGE)

Specification

Range

Weight Design Pressure (MAWP) Test Pressure Design Temperature Range

12.9 Kg 6.9 Bar (100 PSI) 10.34 Bar (150 PSI) -40°C to 130°C -40°F to 266°F

Part No.

Description

530/P100 370/P100 360/P030X

25mm PFA lined reduced bore ball valve 50mm PFA lined full bore ball valve 80mm PFA lined full bore ball valve

X in part number denotes whether left (L) or right (R) hand valve.

Valve complies with EN14432:2006 and RID norms.

Associated Parts Part No.

Associated Parts

368/0500P 368/8047L 5005-417 360/8095P

3” BSP PFA lined outlet flange 3” BSP Halar lined eccentric outlet flange Solid PTFE outlet gasket PFA lined blind flange

Fitting Details Example shown : 360/P030L

378.2

© Fort Vale Engineering Ltd. 2009

Ø 197.0

Ø 113.0

Ø 74.0

Ø 194.0 OUTLET FLANGE 4 X 18MM SLOTS EQUI-SPACED ON A 146MM (3”BSTD) TO 160MM (DIN80) PCD

Ø 140.0

170.0

POSITION CLAMP PLATE TO ACHIEVE HANDING. (CLAMP PLATE SHOWN IN LEFT HAND POSITION)

4 HOLES Ø 18MM SPACED AS SHOWN ON A 160MM PCD.

45.0°

117.8 27.4

20.7

Page 16

BALL025 REV00-21.09.09

PFA Lined 80mm Full Bore Ball Valve

®

Data Parts drawing

1 2

3 4

5 6 7

8

17 9 16

Item

Description

Part No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

M8 hex bolt (4) M8 spring washer (4) M12 locking nut M12 washer Handle 20mm washer (2) Clamp plate Stainless steel stuffing collar PTFE O ring (3) PFA lined spindle PFA lined body PTFE front & rear seal (2) PFA coated ball PFA lined clamp plate M6 countersunk bolt (3) Bottom stuffing collar Top stuffing collar

5111-046 5113-003 5112-007 5123-003 360/3416 5113-041 360/3406/1 360/3464 5005-654 360/3422PL 360/P020 360/3402/5 360/3401PL 360/3462PL 5111-030 360/3413/1 360/3412/1

SEAL KIT Part number 360/P0SK contains all parts marked 10

11 12 13 12 14 15

© Fort Vale Engineering Ltd. 2017

Page 17

BALL026 REV02-24.04.17

3” Blacko Ball Valve 3” BSP Outlet

Data TM

3” Blacko Ball Valve - inlet flange drilled 6 x 14mm holes (see below) on a 168mm PCD; 3” BSP male outlet connection. Left hand operated with TIR facility to handle. parts manufactured in 316 stainless steel with PTFE seals. Options - Right hand operation. Steam heated version.

Specification

Range

Weight Design Pressure (MAWP) Hydraulic Test Pressure Design Temperature Range

15.9 Kg 7 Bar (101.5 PSI) 10.5 Bar (152.3 PSI) -29°C to 200°C (-20°F to 392°F)

M12 bolts torque setting : 50 Nm (37 LBF FT)

Part No.

Description

360/5000L 360/5000R 360/5000XSH

Left hand operated, TIR Right hand operated, TIR Steam heated, left or right hand operated

Associated Parts

Approved to BS EN14432

Part No.

Description

20378 360/0300 20406 5005-036 360/8070 311/3000 10303PS 10329P

Mating flange Inlet bolting kit Bobbin adaptor for 3” table D outlet Outlet gasket 3” Table D Blind flange Outlet bolting kit 3” BSP dust cap with PTFE washer 3” dust cap washer

Fitting Details Example shown : 360/5000L

55°

35°

168.4 (6.63”)

Ø 124.0 (4.88”) SERRATIONS

Ø 76.2 (3.00”)

6 HOLES Ø14.0 (0.551”) SPACED AS SHOWN ON A 168.3 (6.625”) PCD.

Ø 77.9 (3.07”)

3” BSP

378.2 (14.89”)

6 HOLES Ø14.0 (0.551”) SPACED AS SHOWN ON A 168.3 (6.625”) PCD.

55°

35°

105.8 (4.17”)

35°

163.3 (6.43”)

Ø 196.9 (7.75”)

28.4 (1.12”) FULL THREAD

© Fort Vale Engineering Ltd. 2011

Page 18

BALL007 REV03-19.09.11

3” Blacko Ball Valve 3” BSP Outlet

®

Data Parts drawing 1

2 3 4 20

19

18 5

6 17 7

8

9 10 11 12

13

14 15 16

Item 1 2 3 4 5 6 7 8 9 10

Description

Part No.

Item

M8 hex head bolt (4) M8 flat section spring washer (4) M12 self locking nut M12 washer Top stuffing collar Bottom stuffing collar Bottom bearing Spindle 3” flanged ball valve body Back seal

5111-822 5113-003 5112-007 5123-003 360/3412 360/3413 360/3421 360/3422 360/5014 360/3402

11 12 13 14 15 16 17 18 19 20

SEAL KIT part number 360/50SK contains all parts marked

© Fort Vale Engineering Ltd. 2017

Description

Part No.

Solid ball plug Front seal 3” BSP male outlet flange M12 full nut (6) M12 flat section spring washer (6) M12 hex head bolt (6) PTFE O ring (2) Clamp plate 20mm Belleville washer (2) Handle weld assembly

360/3401 360/3405 20409/14 5112-006 5113-010 5111-023 5005-113 360/5005 5113-041 360/3416

REPAIR KIT part number 360/50RK contains all parts marked

Page 19

BALL008 REV05-24.04.17

3” Blacko Ball Valve Slotted 4 Hole Outlet

Data TM

3” Blacko Ball Valve Assembly - inlet flange drilled 6 x 14mm holes on a 168mm PCD. Slotted 4 hole outlet flange. Left hand operated. parts manufactured in 316 stainless steel with PTFE seals. Options - right hand operation. Steam heated version. Available with high temperature seals. Version with 4 hole inlet also available.

Range

Specification Weight Design Pressure (MAWP) Hydraulic Test Pressure Design Temperature Range

12.55 Kg 7 Bar (101.5 PSI) 10.5 Bar (152.3 PSI) -40°C to 200°C (-40°F to 392°F)

Part No.

Description

360/5050X

3” standard ball valve, 6 hole inlet, 4 hole outlet Fitted with high temperature seals Steam heated valve 3" standard ball valve, 4 hole inlet, 4 hole outlet Steam heated valve

360/5050XHT 360/5050XSH 360/5030X

Approved to BS EN14432

Associated Parts

360/5030XSH

Associated Parts

Part No.

Outlet flange Outlet gasket Blind flange Bolting kit (outlet) Mating flange Inlet gasket to suit 20378 mating flange Bolting kit (inlet)

368/0500 5005-417 360/8095 311/3500 20378 5005-169 360/0300

X in part number denotes whether left (L) or right (R) hand valve

Fitting Details Example shown : 360/5050L 378.2

Ø76.2

Ø115.8 STD SERRATIONS

Ø127.0

164.2

ROTATE CLAMP PLATE TO ACHIEVE HANDING. (Clamp plate shown in left hand position)

55° 6 HOLES Ø14.0 SPACED AS SHOWN ON A 168.3 PCD

45° 105.1

35°

35°

77.5

Ø196.9 BOTH FLANGES © Fort Vale Engineering Ltd. 2012

Ø127.0 STD SERRATIONS

SLOTTED OUTLET FLANGE 4 X 18MM WIDE SLOTS MINIMUM 146.0 PCD - 3"BSTD MAXIMUM 160.0 PCD - DIN80

15.4

20.0

2.5

Page 20

BALL009 REV05-25.01.12

3” Blacko Ball Valve Slotted 4 Hole Outlet

Data TM

Parts drawing

1 2 3 4 5

6

7

8 17 9 16

10

11 12

13

14

15

Item 1 2 3 4 5 6 7 8

Description

Part No.

Item

M8 hex head bolt (4) M8 spring washer (4) M12 self locking nut M12 washer Handle 20mm Belleville washer (2) Clamp plate Top stuffing collar

5111-822 5113-003 5112-007 5123-003 360/3416 5113-041 360/5005 360/3412

9 10 11 12 13 14 15 16

SEAL KIT part number 360/50SK contains all parts marked

© Fort Vale Engineering Ltd. 2011

Description

Part No.

Bottom stuffing collar Bottom bearing Spindle 3” flanged ball valve body Back seal Solid ball plug Front seal PTFE O ring (2)

360/3413 360/3421 360/3422 360/5015 360/3402 360/3401 360/3405 5005-113

REPAIR KIT part number 360/50RK contains all parts marked

Page 21

BALL010 REV03-19.09.11

4” BSP Full Bore Ball Valve

Data TM

4”BSP Full Bore Ball Valve - inlet flange drilled 8 x 18mm holes equi-spaced on a 180mm PCD (DIN100 PN16); outlet flange 4” BSP. Available with left hand or right hand operation. Manufactured in 316 stainless steel fitted with PTFE seals. Options - available in sizes from 2” to 5” in stainless steel or carbon steel. Steam-heated version. Alternative outlet connections.

Specification

Fitting Details Part Number : 460/5000X

Weight Design Pressure (MAWP) Hydraulic Test Pressure Design Temperature Range

378.2

22.5 Kg 7 Bar (101.5 PSI) 10.5 Bar (152.3 PSI) -55°C to 200°C -67°F to 392°F

Ø158.8 SERRATIONS

4" BSP

Ø101.6

188.9

57.2 31.8 THREAD

Approved to BS EN14432. i Operating Instructions available - OPIN25

Range Part No.

Description

460/5000L 460/5000R

4” BSP ball valve with left hand operation 4” BSP ball valve with right hand operation 4” BSP ball valve with steam heating provision 4” ball valve with DIN100 PN16 outlet

152.4

460/5000XSH 460/5050X 209.7 14.0 INLET FLANGE: 8 HOLES Ø18.0 EQUI-SPACED ON A 180 PCD (DIN100 PN16) Ø220.0

8 HOLES Ø14.0 EQUI-SPACED ON A 197 PCD

14.0

© Fort Vale Engineering Ltd. 2011

21.0

Page 22

BALL020 REV02-17.11.11

®

4” BSP Full Bore Ball Valve

Data Parts drawing Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

1 2 3 4 5 6 7 8 10

9

11

12

Description

Part No.

M8 hex bolt (4) M8 spring washer (4) Self-locking nut M12 washer Handle Belleville washer (2) Clamp plate Top stuffing collar PTFE O ring (2) Bottom stuffing collar Bottom bearing Spindle Body Rear seal 4” solid ball Front seal 4”BSP outlet flange M12 full nut (8) M12 spring washer (8) M12 Hex bolt (8)

5111-046 5113-003 5112-007 5123-003 360/3416 5113-041 360/5005 360/3412 5005-113 360/3413 360/3421 360/3422 460/9051 460/5056 460/5057 460/5055 460/5060 5112-006 5113-010 5111-023

SEAL KIT Part number 460/50SK contains all parts marked

13 14 15

16 17 18

19 20

© Fort Vale Engineering Ltd. 2014

Page 23

BALL028 REV00-11.12.13

UK Tel : +44 (0)1282 687100 UK Fax: +44 (0)1282 687110 [email protected]

Spares

NL Tel : +31 180 483333 NL Fax: +31 180 410797 [email protected]

TM

Female Socket Ball Valves - Stainless Steel One Piece Ball Valve Description ¼” BSP one piece ball valve 3 /8” BSP one piece ball valve ½” BSP one piece ball valve ¾” BSP one piece ball valve 1” BSP one piece ball valve 1¼” BSP one piece ball valve 1½” BSP one piece ball valve 2” BSP one piece ball valve

Two Piece Ball Valve Part No. 410/104025 410/104037 410/104050 410/104075 410/104100 410/104125 410/104150 410/104200

Description ¼” BSP two piece ball valve 3 /8” BSP two piece ball valve ½” BSP two piece ball valve ¾” BSP two piece ball valve 1” BSP two piece ball valve 1¼” BSP two piece ball valve 1½” BSP two piece ball valve 2” BSP two piece ball valve 2½” BSP two piece ball valve 3” BSP two piece ball valve

Part No. 410/204025 410/204037 410/204050 410/204075 410/204100 410/204125 410/204150 410/204200 410/204250 410/204300

Three Piece Ball Valve Description ¼” BSP three piece ball valve 3 /8” BSP three piece ball valve ½” BSP three piece ball valve ¾” BSP three piece ball valve 1” BSP three piece ball valve 1¼” BSP three piece ball valve 1½” BSP three piece ball valve 2” BSP three piece ball valve 2½” BSP three piece ball valve 3” BSP three piece ball valve 4” BSP three piece ball valve

Part No. BSP 410/304025B 410/304037B 410/304050B 410/304075B 410/304100B 410/304125B 410/304150B 410/304200B 410/304250B 410/304300B 410/304400B

Part No. WELD PREP 410/304025W 410/304037W 410/304050W 410/304075W 410/304100W 410/304125W 410/304150W 410/304200W 410/304250W 410/304300W 410/304400W

CAUTION: Do not overtighten these ball valves.

© Fort Vale Engineering Ltd. 2009

Page 24

SPA040 REV01-25.04.06

Page 25

THIS PAGE IS INTENTIONALLY BLANK

1" Firesafe / Lethal Service Ball Valve

®

Data

1" Full Bore Firesafe / Lethal Service Ball Valve - inlet and outlet flange drilled 4 x 18mm holes equi-spaced on a 89mm PCD. parts manufactured in 316 stainless steel fitted with TFM PTFE main seal. NOTE : The Firesafe specification ball valve is not suitable for a Lethal Service application. The Lethal Service specification ball valve is suitable for both a Firesafe and a Lethal Service application. Options - left hand or right hand operated. 1", 2" and 3" Firesafe/Lethal Service ball valves available.

Specification

Range

Weight Design Pressure (MAWP) Test Pressure Min. Design Temperature Max. Design Temperature

4.77 Kgs 16 Bar (232 PSI) 24 Bar (348 PSI) -40°C (-40°F) 205°C (401°F)

Part No.

Description

310/5000FSL 310/5000FSR 310/5000LSL

1” Firesafe Ball Valve – left hand 1” Firesafe Ball Valve – right hand 1” Lethal Service/Firesafe Ball Valve – left hand 1” Lethal Service/Firesafe Ball Valve – right hand

310/5000LSR

Approved to : BS EN14432, EN12516-2, EN10497, API 607.

Fitting Details

Ø24.5

Ø24.5

Example shown : 310/5000XXR

INLET & OUTLET FLANGE DRILLED 4 x Ø18.0 HOLES EQUI-SPACED ON A 89.0 PCD 20.0 82.8 191.0

83.8

124.0

Ø123.5 © Fort Vale Engineering Ltd. 2014

Page 26

BALL029 REV00-05.11.14

1" Firesafe / Lethal Service Ball Valve

®

Data Parts drawing

1

2

3

4

5 6 7 8 9

Item

Description

Part No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

M10 locking nut *See Note M10 locking washer (pair) Handle *See Note 12mm Belleville washer (2) Stuffing gland Bearing bush Gland seal Stuffing gland Perfluoroelastomer o ring M6 cap screw 2” ball valve body *See Note TFM PTFE ball seal (2) Ball *See Note Body seal Seal retainer 3mm ball (2) Plunger spring (2) Spindle Bottom bearing

5112-008-XX 5113-191 310/0125XX 5113-045 310/3458 310/3443 310/0133 310/0130 5005-212PER 5111-034 310/5010XX 310/0102FS 370/1002XX 310/0106GR 310/0176/2 10154SS 370-3469 310/0120FS 310/0104FS

10

Note : Part number varies according to specification. 11 12 13 12 14 15

19

18 17 16

© Fort Vale Engineering Ltd. 2014

Page 27

BALL030 REV00-05.11.14

2" Firesafe / Lethal Service Ball Valve

®

Data

2" Full Bore Firesafe / Lethal Service Ball Valve - inlet and outlet flange drilled 8 x 19mm holes equi-spaced on a 127mm PCD (2" ASA 300). parts manufactured in 316 stainless steel fitted with TFM PTFE main seal. NOTE : The Firesafe specification ball valve is not suitable for a Lethal Service application. The Lethal Service specification ball valve is suitable for both a Firesafe and a Lethal Service application. Options - left hand or right hand operated. 1", 2" and 3" Firesafe/Lethal Service ball valves available.

Specification

Range

Weight Design Pressure (MAWP) Test Pressure Min. Design Temperature Max. Design Temperature

10.3 Kgs 16 Bar (232 PSI) 24 Bar (348 PSI) -40°C (-40°F) 205°C (401°F)

Part No.

Description

370/5000FSL 370/5000FSR 370/5000LSL

2” Firesafe Ball Valve – left hand 2” Firesafe Ball Valve – right hand 2” Lethal Service/Firesafe Ball Valve – left hand 2” Lethal Service/Firesafe Ball Valve – right hand

370/5000LSR

Approved to : BS EN14432, EN12516-2, EN10497, API 607.

Associated Parts Part No.

Description

5005-724SP

Stainless steel/graphite spiral wound gasket – suits 2” ball valve inlet & outlet

Fitting Details Example shown : 370/5000XXR

Ø49.5

Ø49.5

2-OFF 5005-724SP SUPPLIED SEPARATE

12.0

Ø101.8 STD SERRATIONS

108.8

INLET & OUTLET FLANGE DRILLED 8 X Ø19.0 HOLES EQUI-SPACED ON A 127.0 PCD (2" ASA 300)

1.2 45° 21.7

23.5 124.1

190.5 Ø165.1

Ø165.1 © Fort Vale Engineering Ltd. 2014

Page 28

BALL033 REV00-06.11.14

2" Firesafe / Lethal Service Ball Valve

®

Data Parts drawing

1 2 3

4 5 6 7 8

9 10 11 12 13 14 15

Item

Description

Part No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

M10 locking nut *See Note M10 plain washer Handle 16mm Belleville washer (3) Stop pin *See Note M6 cap screw (3) *See Note M6 spring washer (4) Retaining gland *See Note Bearing bush Wave spring Stuffing gland Gland seal Stuffing gland Perfluoroelastomer o ring 2” ball valve body *See Note TFM PTFE ball seal (2) Ball *See Note Body seal Seal retainer Bottom bearing Spindle Plunger spring 3mm ball

5112-008-XX 5113-009 370/0125 5113-038 370/3442-XX 5111-108-XX 5113-008 370/3449XX 370/3443 370/3457 370/3458 370/3353 370/3459 5005-216PER 370/5001XX 370/0102FS 370/3301XX 370/0106GR 370/5003 370/0104FS 370/0120FS 370-3469 10154SS

Note : Part number varies according to specification.

16 17

18 19

20

21 22 23

© Fort Vale Engineering Ltd. 2014

Page 29

BALL034 REV00-06.11.14

®

2" Firesafe Ball Valve

Data

2" Full Bore Firesafe Ball Valve - inlet and outlet flange drilled 4 x 18mm holes equi-spaced on a 125mm PCD. parts manufactured in 316 stainless steel fitted with TFM PTFE main seal. NOTE : This Firesafe specification ball valve is not suitable for a Lethal Service application. Options - left hand or right hand operated. 1", 2" and 3" Firesafe/Lethal Service ball valves available.

Specification

Range

Weight Design Pressure (MAWP) Test Pressure Min. Design Temperature Max. Design Temperature

7.64 Kgs 16 Bar (232 PSI) 24 Bar (348 PSI) -40°C (-40°F) 205°C (401°F)

Approved to : BS EN14432, EN12516-2, EN10497, API 607.

Part No.

Description

370/0100FSL 370/0100FSR

2” Firesafe Ball Valve – left hand 2” Firesafe Ball Valve – right hand

Associated Parts Part No.

Description

5005-724SP

Stainless steel/graphite spiral wound gasket – suits 2” ball valve inlet & outlet

Fitting Details

108.8

Example shown : 370/0100FSR

Ø102.1

Ø49.5

Ø49.5

2-OFF 5005-724SP SUPPLIED SEPARATE

INLET & OUTLET FLANGE DRILLED 4 X Ø18.0 HOLES EQUI-SPACED ON A 125.0 PCD 20.3 45°

18.0 82.4

190.5 Ø165.0

Ø165.0 © Fort Vale Engineering Ltd. 2014

Page 30

BALL031 REV01-05.11.14

®

2" Firesafe Ball Valve

Data Parts drawing 1 2 3

4

5 6

7

8

9 10 11

12

Item

Description

Part No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

M10 locking nut M10 washer Handle 16mm Belleville washer (3) Stop pin M6 cap screw (3) M6 spring washer (4) Retaining gland Bearing bush Wave spring Stuffing gland Gland seal Stuffing gland Perfluoroelastomer o ring 2” ball valve body TFM PTFE ball seal (2) Ball Body seal Seal retainer Bottom bearing Spindle Plunger spring 3mm ball

5112-008 5113-009 370/0125 5113-038 370/3442 5111-108 5113-008 370/3449 370/3443 370/3457 370/3458 370/3353 370/3459 5005-216PER 370/0110FS 370/0102FS 370/3301 370/0106GR 370/0176/2 370/0104FS 370/0120FS 370-3469 10154SS

13 14

15 16 17

18 19

20

21 22 23

© Fort Vale Engineering Ltd. 2014

Page 31

BALL032 REV00-09.04.14

3" Firesafe / Lethal Service Ball Valve

®

Data

3" Full Bore Firesafe / Lethal Service Ball Valve - inlet and outlet flange drilled 8 x 18mm holes equi-spaced on a 160mm PCD. parts manufactured in 316 stainless steel fitted with TFM PTFE main seal. NOTE : The Firesafe specification ball valve is not suitable for a Lethal Service application. The Lethal Service specification ball valve is suitable for both a Firesafe and a Lethal Service application. Options - left hand or right hand operated. 1", 2" and 3" Firesafe/Lethal Service ball valves available.

Specification

Range

Weight Design Pressure (MAWP) Test Pressure Min. Design Temperature Max. Design Temperature

17.0 Kgs 16 Bar (232 PSI) 24 Bar (348 PSI) -40°C (-40°F) 205°C (401°F)

Approved to : BS EN14432, EN12516-2, EN10497, API 607.

Part No.

Description

360/5000FSL 360/5000FSR 360/5000LSL

3” Firesafe Ball Valve – left hand 3” Firesafe Ball Valve – right hand 3” Lethal Service/Firesafe Ball Valve – left hand 3” Lethal Service/Firesafe Ball Valve – right hand

360/5000LSR

Associated Parts Part No.

Description

5005-630SP

Stainless steel/graphite spiral wound gasket – suits 3” ball valve inlet & outlet

Fitting Details Example shown : 360/5000XXR

INLET & OUTLET FLANGE DRILLED 8 HOLES Ø18.0 EQUI-SPACED ON A 160.0 PCD

22.5°

Ø75.5

Ø140.0 STD SERRATIONS BOTH SIDES

Ø75.5

2-OFF 5005-630SP SUPPLIED SEPARATE

21.8

25.7 121.0 482.7

121.0

Ø200.0

Ø209.0 © Fort Vale Engineering Ltd. 2014

Page 32

BALL035 REV00-04.11.14

3" Firesafe / Lethal Service Ball Valve

®

Data Parts drawing

1 2 3

4

5

6

7 8 9 10 11 12

Item

Description

Part No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

M12 locking nut *See Note M12 washer Handle 20mm Belleville washer (3) M6 cap screw (7) *See Note M6 spring washer (6) Retaining gland *See Note Bearing bush Wave spring Stuffing gland Gland seal Stuffing gland Perfluoroelastomer o ring 3” ball valve body *See Note TFM PTFE ball seal (2) Ball *See Note Body seal Seal retainer Bearing bush Spindle 3mm ball Plunger spring

5112-007-XX 5123-003 360/3416FS 5113-041 5111-015-XX 5113-008 360/5005XX 360/0182 360/3351 360/0180 360/3353 360/0181 5005-928HT 360/5014XX 360/3402FS 360/3401XX 360/0106GR 360/0176/2 360/3421FS 360/3422FS 10154SS 370-3469

Note : Part number varies according to specification.

13

14 15 16

17 18

19

20 21 22

© Fort Vale Engineering Ltd. 2014

Page 33

BALL036 REV00-04.11.14

Page 34

THIS PAGE IS INTENTIONALLY BLANK

®

Fort Vale UK Head Office & Manufacturing Plant Tel : +44 (0)1282 687120 Fax : +44 (0)1282 687110 Email : [email protected]

Fort Vale USA Tel : +1 281 471 8100 Fax : +1 281 471 8116 Email : [email protected]

Fort Vale Netherlands Tel : +31 (0)180 483333 Fax : +31 (0)180 410797 Email : [email protected]

Fort Vale Russian Federation Tel : +7 916 682 0947 Email : [email protected] All goods supplied will be subject to Fort Vale Engineering Ltd and Conditions of Sale (Ref. FV4) which are available upon request, or may be viewed at www.fortvale.com. Please note that this brochure and the contents herein remain the property of Fort Vale Engineering Limited. This brochure may not be copied or reproduced, or the information contained herein divulged to any third party without the prior written permission of Fort Vale Engineering Limited. Repair/refurbishment/resetting of Fort Vale valves may be carried out only by trained and authorised personnel. Fort Vale Engineering Limited shall not, in any circumstances, be liable for injuries, losses, expenses or damage, direct or consequential, sustained by the buyer or any person which may in any degree be attributable to the adoption, either by the buyer or any third party, of technical or other information, data or advice given on behalf of Fort Vale Engineering Limited or however otherwise caused in relation to the use of its products in accordance with Fort Vale Engineering Limited’s recommendation. The specifications included in this catalogue are intended to be generic and must be interpreted as equivalent or functionally equivalent. The identification of many items is facilitated by illustrations (photographs and line drawings). The mention of, or reference to specific companies, national standards, or trade names, including those that might appear on the photographs, is intended for illustration purposes only. It does not imply an endorsement, preference or availability of any specific standard, brand or supplier. The data and information contained herein is being provided for information only and without responsibility, and Fort Vale Engineering Limited makes no representations or warranties, either expressed or implied, as to the accuracy, completeness, or fitness for a particular purpose. Fort Vale Engineering Limited does not accept any responsibility or liability with regard to the reliance on, or use of this data and information. © Fort Vale Engineering Ltd. 2017

REV09_15.03.17

Fort Vale P.R. China Tel : +86 21 6442 1367 Fax : +86 21 6442 1376 Email : [email protected]

Fort Vale Singapore Tel : +65 6515 9950 Fax : +65 6515 3034 Email : [email protected]

Fort Vale Australia Tel : +61 7 3310 4854 Email : [email protected]

www.fortvale.com