Tshoot Ping Plan Sam 6v6x4f

IPV4 R1:(T03) Wrong IP of BGP neighbor

NEW

R1: ip nat outside should be replaced with ip nat inside

2. Check interface between R1 and R2

R1:(T05) WAN ACL statementmissing

3.Check the Edge access-list statement `

R4:(T1 1) Redistributeospf OSPF->EIGRP to OSPF_to_EIGRP

R1 Sh run andcheck

Yes

R1 Ping ipv6 R3(s0/0/ 0.23 ipv6

Client 1 Ping 10.1.1.1

No

Yes

Yes

No

R2: (T12) IPv6: enable ospf 0

No

R3: (T15) IPv6:remove tunnel mode ipv6

Yes

Client 1 Ping 10.1.1.2

R1 Ping ipv6 R4(tunnel ipv6 addr)

No Yes Yes

R4 Sh ip Eigrp Neighbor

R4:(T1 4) EIGRP ive Interface

IPV6

1.Check if there is wrong BGB Statement

R1:(T01)OSPF Authentication

NEW

Read the scenario

Client 1 ping 10.2.1.1

R4: (T16) missing Redistribution from RIPng toOSPFv3

No

No

Yes DSW1:(T06) VLAN filter

DSW1 Sh run Check VlanFilter statement

No

NEW

DSW1:ip helper-address should match R4 (DH server) loopback

Yes

DSW1 Sh run ip helper-address

10.1.21.129 No

ASW1:(T07) Port Security

Down

ASW1 Sh run Sh ip intbr

UP

ASW1:(T09) Port Channel not allowing VLAN10,200

Vlan is Ok

ASW1 Shvlan

Vlan is not ok

ASW1:(T08) Access port not in VLAN 10 and should be added under the interface

Good Luck SAM