Ant-asi4517r3v06-2496 Datasheet.pdf 1v3q3v
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 2z6p3t
Overview 5o1f4z
& View Ant-asi4517r3v06-2496 Datasheet.pdf as PDF for free.
More details 6z3438
- Words: 791
- Pages: 2
ASI4517R3v06 DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Antenna Specifications Electrical Properties 2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
4 x (1695 - 2690)
824 - 894
880 - 960
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately at mid Tilt over all Tilts
Gain (dBi)
1695 - 1990
2 - 12 , continuously adjustable , each band separately
14.9
15.5
15.8
16.0
14.7 ±0.5
15.3 ±0.5
15.6 ±0.5
15.8 ±0.5
at mid Tilt
Bottom
over all Tilts
15.5
15.9
16.4
16.7
15.4 ±0.5
15.8 ±0.5
16.3 ±0.4
16.6 ±0.6
at mid Tilt
Top
15.0
15.4
15.7
16.2
14.9 ±0.6
15.3 ±0.6
15.6 ±0.5
16.1 ±0.5
> 16
> 17
> 16
> 17
> 16
63 ±5
62 ±5
61 ±5
60 ±5
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
> 16
> 16
> 17
68 ±4
63 ±3
61 ±3
60 ±3
10.5 ±0.9
9.5 ±0.8
9.2 ±0.7
8.5 ±0.7
Bottom
10.4 ±0.6
9.4 ±0.5
8.1 ±0.3
7.4 ±0.3
Top
9.7 ±0.6
8.9 ±0.5
7.9 ±0.3
7.1 ±0.3
VSWR
< 1.5 ≥ 28
Cross polar isolation (dB)
≥ 28 ≥ 28
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 22
> 25
> 25
> 24
> 25
> 25
> 25
> 25
> 18
> 18
> 18
> 20
> 20
> 20
> 20
> 20
500 (at 50℃ ambient temperature)
Total power (W)
250 (at 50℃ ambient temperature)
1000 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)
Intermodulation IM3 (dBc) Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1999 x 429 x 196
Packing dimensions (H x W x D) (mm)
2220 x 530 x 275
Antenna weight (kg)
36.0
Clamps weight (kg)
5.8 (2 units)
Antenna packing weight (kg)
52.8 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1273 1999
Mast diameter ed (mm)
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
910 (at 150 km/h) 265 (at 150 km/h) 910 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
12 x 4.3-10 Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt: 0 - 12 °
3.1 kg
1 (Separate packing)
1
ASI4517R3v06 DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, Huawei before system installation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM Integrated RET S/N:
HWMxxx……LBy1 HWMxxx……LTy2
LTy2
RTy4
LBy1
RBy3
Lr1
Rr2
HWMxxx……...Lr1 HWMxxx...…RTy4 HWMxxx...…RBy3 HWMxxx…..…Rr2 r - Red L - Left array T - Top array
Pattern sample for reference
690 - 960 MHz
y - Yellow R - Right array B - Bottom array
1695 - 2690 MHz (Bottom)
NOTE
1695 - 2690 MHz (Top)
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas. 2. HUAWEI ‘s standard brackets and accessories must be used for any installation. 3. The antenna working environment must meet the requirements specified in the datasheet. 4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements described in the antenna installation guide. Huawei Technologies Co., Ltd.
Bantian, Longgang District, Shenzhen 518129, P.R.China
Any previous datasheet issues become invalid.
2
www.huawei.com/antenna Issue: 2017-04-26
Antenna Specifications Electrical Properties 2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
4 x (1695 - 2690)
824 - 894
880 - 960
Polarization
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately at mid Tilt over all Tilts
Gain (dBi)
1695 - 1990
2 - 12 , continuously adjustable , each band separately
14.9
15.5
15.8
16.0
14.7 ±0.5
15.3 ±0.5
15.6 ±0.5
15.8 ±0.5
at mid Tilt
Bottom
over all Tilts
15.5
15.9
16.4
16.7
15.4 ±0.5
15.8 ±0.5
16.3 ±0.4
16.6 ±0.6
at mid Tilt
Top
15.0
15.4
15.7
16.2
14.9 ±0.6
15.3 ±0.6
15.6 ±0.5
16.1 ±0.5
> 16
> 17
> 16
> 17
> 16
63 ±5
62 ±5
61 ±5
60 ±5
over all Tilts
Side lobe suppression for first side lobe above main beam (dB) Horizontal 3dB beam width (°) Vertical 3dB beam width (°)
> 16
> 16
> 17
68 ±4
63 ±3
61 ±3
60 ±3
10.5 ±0.9
9.5 ±0.8
9.2 ±0.7
8.5 ±0.7
Bottom
10.4 ±0.6
9.4 ±0.5
8.1 ±0.3
7.4 ±0.3
Top
9.7 ±0.6
8.9 ±0.5
7.9 ±0.3
7.1 ±0.3
VSWR
< 1.5 ≥ 28
Cross polar isolation (dB)
≥ 28 ≥ 28
Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)
0°
Max. power per input (W)
> 22
> 25
> 25
> 24
> 25
> 25
> 25
> 25
> 18
> 18
> 18
> 20
> 20
> 20
> 20
> 20
500 (at 50℃ ambient temperature)
Total power (W)
250 (at 50℃ ambient temperature)
1000 (at 50℃ ambient temperature) ≤ -153 (2 x 43 dBm carrier)
Intermodulation IM3 (dBc) Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. 106
Mechanical Properties Antenna dimensions (H x W x D) (mm)
1999 x 429 x 196
Packing dimensions (H x W x D) (mm)
2220 x 530 x 275
Antenna weight (kg)
36.0
Clamps weight (kg)
5.8 (2 units)
Antenna packing weight (kg)
52.8 (Included clamps) 50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
1273 1999
Mast diameter ed (mm)
-40 .. +65 Frontal: Lateral: Rear side:
Wind load (N)
910 (at 150 km/h) 265 (at 150 km/h) 910 (at 150 km/h)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
12 x 4.3-10 Female
Connector position
Bottom
Accessories Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt: 0 - 12 °
3.1 kg
1 (Separate packing)
1
ASI4517R3v06 DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m
Integrated RET Specifications Properties RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V) < 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type) 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female
RET connector Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
3 (10/350 μs) 10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, Huawei before system installation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification: CE, FCC, IC, RCM Integrated RET S/N:
HWMxxx……LBy1 HWMxxx……LTy2
LTy2
RTy4
LBy1
RBy3
Lr1
Rr2
HWMxxx……...Lr1 HWMxxx...…RTy4 HWMxxx...…RBy3 HWMxxx…..…Rr2 r - Red L - Left array T - Top array
Pattern sample for reference
690 - 960 MHz
y - Yellow R - Right array B - Bottom array
1695 - 2690 MHz (Bottom)
NOTE
1695 - 2690 MHz (Top)
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas. 2. HUAWEI ‘s standard brackets and accessories must be used for any installation. 3. The antenna working environment must meet the requirements specified in the datasheet. 4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements described in the antenna installation guide. Huawei Technologies Co., Ltd.
Bantian, Longgang District, Shenzhen 518129, P.R.China
Any previous datasheet issues become invalid.
2
www.huawei.com/antenna Issue: 2017-04-26
More Documents from "Igor Aguirre" 6p4e1u
Ant-asi4517r3v06-2496 Datasheet.pdf 1v3q3v
April 2023 0
Ant Asi4517r3v06 2496 Datasheet 6n3k3i
April 2020 85
Teorija Betonskih Konstrukcija 6m2b2r
May 2020 5
6g3p1u
November 2019 54
Resistores 4z4m6j
March 2021 0