1850 Tss-5c Datasheet 4u6wk

Alcatel-Lucent 1850 Transport Service Switch 5C RELEASE 6.1

The Alcatel-Lucent 1850 Transport Service Switch (TSS)-5C is a compact Packet-Optical Transport switch and Ethernet access demarcation device, ideally suited for mobile backhaul and business Ethernet services. High-availability, mission-critical Ethernet and E1/DS1/STM-1 services are ed by a comprehensive set of Packet Transport Network (PTN) and Carrier Ethernet features. The 1850 TSS-5C extends MPLS-TP capability to the customer premises and is compliant to Metro Ethernet Forum standards. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• ••••••••••••••• To promote resiliency and reliability for packet and TDM traffic is assured by multiple network path and link protection mechanisms, ed by hardwarebased data plane OAM. End-to-end OAM greatly simplifies the task of meeting strict Service Level Agreements (SLA). The challenge of delivering timing to 2G/3G/4G base stations is met by the availability of multiple synchronization options. Designed for outside plant deployment, the 1850 TSS-5C is an excellent converged platform for collecting TDM/packet mobile backhaul traffic at cell sites. It provides a growth path for exponentially increasing IP traffic. The 1850 TSS-5C is equally well equipped to be deployed as a network termination unit for demarcation, media conversion, and distance extension applications as part of a Carrier Ethernet service offering. Its compact 1RU chassis fits in any wiring closet. The Alcatel-Lucent 1850 TSS-5C is an integral part of the Alcatel-Lucent 1850 TSS portfolio for packet optical transport networks and is fully managed by the Alcatel-Lucent 1350 Optical Management System (OMS).

Features  Compact 1RU chassis  9 Gbps switching fabric  Ethernet: FE and GE interfaces (electrical and optical)  STM-1 and E1/DS1 interfaces  Microwave card for integration with Alcatel-Lucent's Microwave Packet Radio (9500 MPR)

 MPLS-TP  Metro Ethernet Forum (MEF) certified with high reliability and OAM  Circuit Emulation over Ethernet with MPLS PWE3  E-line, E-LAN, and E-Tree services  Tunnel protection mechanisms  Multiple synchronization options  Temperature hardened for outside plant deployment

Benefits  Achieve economies of scale using a single platform for mobile backhaul/transport and Carrier Ethernet services  Maintain high margin revenue streams from priority traffic with advanced traffic management and QoS features  Accelerate network transformation from TDM to packet architectures  Reduce CAPEX by eliminating the need for overlay networks and multiple equipment types  Reduce OPEX by simplifying operations, training, and network management requirements

Technical Specifications System Hardware ▫ 9 Gbps switching fabric ▫ 4 x GE/FE interfaces (SFP)

Switching

Ethernet

▫ 12 x FE interfaces (electrical)

▫ 32,000 MAC table

▫ Two slots for optional interface modules (hot-swappable)

▫ MEF Ethernet services: E-Line, E-LAN, E-Tree

▫ Management LAN, console, MDIO, and station clock ports or external synchronization interfaces

▫ Jumbo frames

▫ Power supply (DC or AC)

▫ Deep VLAN classification ▫ Auto-negotiation, flow control, MDIX ▫ OSPF management（MD5）

▫ Fan tray (hot-swappable)

▫ Port laser shutdown

Multi-service module

▫ L2 control protocol filtering/tunneling

▫ 1 x STM-1 channelized CES (SFP) ▫ 16 x E1 (75Ω) CES ▫ 1 x GE (SFP)

Fast Ethernet module electrical ▫ 8 x FE (10/100BASE-T)

▫ Port Mirroring: ingress/egress

▫ L2 Access Control Lists (ACL) ▫ Multiple classification options: port, VID, P, MAC DA/SA, IPv4&IPv6 DS ▫ 8 QoS classes ▫ Strict priority, WRR scheduling ▫ Tail-drop

Fast Ethernet module optical

▫ Ingress two-rate three-color metering/ policing RFC2698/MEF10.1

▫ 8 x FE (SFP)

▫ Class-based queuing

DS1/E1 module

▫ Egress shaping per port/queue

▫ 16 x DS1 (100Ω)/E1 (120Ω) CES

▫ Anti Denial of Service attacks ▫ MPLS label push/pop/swap operations, LER or LSR

E1 module

▫ ITU-T Y.1731 pro-active (1&2way ETH-DM )

Physical specifications

▫ ITU-T Y.1731 On-demand (1&2way ETH-DM, Synthetic Loss Managament (SLM)

▫ Height: 43.6 mm (1.73 in.) – 1 RU

▫ MEF S-OAM ▫ Port/EVC loopback ▫ IEEE 802.3ah link OAM ▫ Performance Monitoring: port counters, TCA, RMON IETF RFC 2819, flow counters, per EVC & Tunnel Availability and SLA counters (Y.1563)

▫ Current drain: 3 A max at +24 VDC, 1 A max at 90 VAC

▫ G.8113.1 MPLS-TP section proactive (CCM, RDI) ▫ G.8113.1 MPLS-TP Tunnel proactive (CCM, APS, AIS, RDI, Synt LM, 2way DM)

▫ G.8113.1 MPLS-TP Tunnel OAM On Demand (LB on MEP, MIP, 1-2Way DM)

¬ Humidity: 5% to 85%, non-condensing

▫ Web browser interface (ZIC)

▫ Model M4O12FEK compliant to ETSI 300 019 Class 3.2:

▫ Command Line Interface (CLI) ▫ TL1, SNMP v2/v3 ▫ SSH, SSL

▫ IP routing (iIS-IS) over in-band management channels

▫ Supplies power to the 9500 MPRe

▫ 802.1x Port-based network access control

▫ Sync In/Out ports: 2MHz/E1 ▫ 1588v2 UDP/IP encapsulation ▫ Best Master Clock Algorithm (BMCA)

Protection ▫ 1:1 bidirectional linear tunnel protection (MPLS-TP) ▫ Configurable reversion modes for G.8131 (1:1, 1:N) protection

▫ E1/DS1 pseudowires: SAToP ▫ 1+1 MSP for STM-1 interface ▫ E1/logical E1/STM-1/VC12 port loopback ▫ TDM CES timing modes: TDM loop line, Ethernet Line (SyncE or adaptive or differential packet timing), external, free-running ▫ ITU-T G.705 PDH Alarms and PM Counters for E1 physical ports

▫ Dual-homing tunnel protection

Ethernet OAM

▫ IEEE 802.1AX Link Aggregation

▫ ITU-T Y.1731/IEEE802.1ag/ MEF Ethernet Service OAM (CC, LB, LT, AIS, CSF)

▫ MPLS-TP Ring Protection

▫ IEEE 802.3ah (EFM)

▫ Model M4O12FEB compliant to GR-3108 Class 2:

▫ Alcatel-Lucent 1350 Optical Management System (OMS)

▫ 2 x GE (SFP or 1000BASE-T) for connection to Alcatel-Lucent 9500 MPRe microwave radio ODU

▫ 1588v2 ToD and 1PPS In/Out ports

Environmental

Management

▫ MAC ACL extended criteria (IPv4, IPv6)

▫ Related RFCs: 4553, 4446, 4197, 3985, 3916

▫ Power consumption: 45W typical, 80W maximum (without microwave)

¬ Operating temperature: -40ºC to +65ºC (-40ºF to +149ºF)

▫ Ethernet in-band management

▫ IEEE 1588v2 ordinary, boundary, transparent clocks

Power

MPLS-TP OAM

▫ Bound MAC table size per service with watermark

PWE3 / TDM CES

▫ Wall mount and Rack mount kits (19 in., 23 in., ETSI)

▫ Single AC: 90-264 VAC

Microwave module

▫ Sync-E with SSM

▫ Weight: max. 4.4 kg (9.7 lb)

▫ 802.1ah Dying Gasp

▫ Remote software via SFTP

Synchronization

▫ Depth: 213.2 mm (8.35 in.)

▫ DC: redundant -48/-60 VDC or +24/-48 VDC

Security

▫ Intrusion alarm

▫ Width: 442 mm (17.40 in.)

▫ LPT and LLCF

▫ 16 x E1 (75Ω) CES

▫ Configurable MAC aging, MAC flushing

Dimensions and weight

¬ Operating temperature: -5ºC to +45ºC (+23ºF to +113ºF) ¬ Humidity: 5% to 95%, non-condensing

Regulatory and standards compliance ▫ NEBS Level 3 Zone 4,

GR-63

▫ RADIUS authentication

▫ CE mark: EN 300 386

▫ DCN auto setup

▫ ES 201468 ▫ IEC 60825-1, 60825-2 ▫ EN 60950-1 ▫ EN 55022 Class A: radiated and conducted emissions ▫ ETSI 300-019 Storage, Class 1.2; Transportation, Class 2.3; Operational, Class 3.2 ▫ ITU-T K.21 ▫ MEF 9, 14 certificated