X-ray Photo Electron Spectroscopy (xps) 6r3k63
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 2z6p3t
Overview 5o1f4z
& View X-ray Photo Electron Spectroscopy (xps) as PDF for free.
More details 6z3438
- Words: 2,203
- Pages: 39
X-Ray Photoelectron Spectroscopy (XPS) David Echevarría Torres University of Texas at El Paso College of Science Chemistry Department
Outline
XPS Background XPS Instrument How Does XPS Technology Work? Auger Electron Cylindrical Mirror Analyzer (CMA) Equation KE versus BE Spectrum Background Identification of XPS Peaks X-rays vs. e- Beam XPS Technology
XPS Background
XPS technique is based on Einstein’s idea about the photoelectric effect, developed around 1905
The concept of photons was used to describe the ejection of electrons from a surface when photons were impinged upon it
During the mid 1960’s Dr. Siegbahn and his research group developed the XPS technique.
In 1981, Dr. Siegbahn was awarded the Nobel Prize in Physics for the development of the XPS technique
X-Rays
Irradiate the sample surface, hitting the core electrons (e-) of the atoms.
The X-Rays penetrate the sample to a depth on the order of a micrometer.
Useful e- signal is obtained only from a depth of around 10 to 100 Å on the surface.
The X-Ray source produces photons with certain energies: MgK photon with an energy of 1253.6 eV AlK photon with an energy of 1486.6 eV
Normally, the sample will be radiated with photons of a single energy (MgK or AlK). This is known as a monoenergetic XRay beam.
Why the Core Electrons?
An electron near the Fermi level is far from the nucleus, moving in different directions all over the place, and will not carry information about any single atom.
Fermi level is the highest energy level occupied by an electron in a neutral solid at absolute 0 temperature. Electron binding energy (BE) is calculated with respect to the Fermi level.
The core e-s are local close to the nucleus and have binding energies characteristic of their particular element.
The core e-s have a higher probability of matching the energies of AlK and MgK. Valence eCore e-
Atom
Binding Energy (BE) The Binding Energy (BE) is characteristic of the core electrons for each element. The BE is determined by the attraction of the electrons to the nucleus. If an electron with energy x is pulled away from the nucleus, the attraction between the electron and the nucleus decreases and the BE decreases. Eventually, there will be a point when the electron will be free of the nucleus.
0
B.E.
This is the point with 0 energy of attraction between the electron and the nucleus. At this point the electron is free from the atom.
x p+
These electrons are attracted to the proton with certain binding energy x
Energy Levels Vacumm Level
Ø, which is the work function
Fermi Level BE
Lowest state of energy
At absolute 0 Kelvin the electrons fill from the lowest energy states up. When the electrons occupy up to this level the neutral solid is in its “ground state.”
XPS Instrument
University of Texas at El Paso, Physics Department Front view of the Phi 560 XPS/AES/SIMS UHV System
XPS is also known as ESCA (Electron Spectroscopy for Chemical Analysis).
The technique is widely used because it is very simple to use and the data is easily analyzed.
XPS works by irradiating atoms of a surface of any solid material with X-Ray photons, causing the ejection of electrons.
XPS Instrument The XPS is controlled by using a computer system.
The computer system will control the X-Ray type and prepare the instrument for analysis. University of Texas at El Paso, Physics Department Front view of the Phi 560 XPS/AES/SIMS UHV System and the computer system that controls the XPS.
XPS Instrument
University of Texas at El Paso, Physics Department Side view of the Phi 560 XPS/AES/SIMS UHV System
The instrument uses different pump systems to reach the goal of an Ultra High Vacuum (UHV) environment.
The Ultra High Vacuum environment will prevent contamination of the surface and aid an accurate analysis of the sample.
XPS Instrument X-Ray Source
Ion Source SIMS Analyzer
Sample introduction Chamber
Sample Introduction Chamber
The sample will be introduced through a chamber that is in with the outside environment
It will be closed and pumped to low vacuum.
After the first chamber is at low vacuum the sample will be introduced into the second chamber in which a UHV environment exists. First Chamber
Second Chamber UHV
Diagram of the Side View of XPS System X-Ray source Ion source Detector
SIMS Analyzer
Axial Electron Gun
Sample introduction Chamber
Sample Holder sample Roughing Pump
CMA Slits
Ion Pump
How Does XPS Technology Work?
A monoenergetic x-ray beam emits photoelectrons from the from the surface of the sample.
Ultrahigh vacuum environment to eliminate excessive surface contamination.
The X-Rays either of two energies:
Cylindrical Mirror Analyzer (CMA) measures the KE of emitted e-s.
The spectrum plotted by the computer from the analyzer signal.
The binding energies can be determined from the peak positions and the elements present in the sample identified.
Al Ka (1486.6eV) Mg Ka (1253.6 eV)
The x-ray photons The penetration about a micrometer of the sample The XPS spectrum contains information only about the top 10 - 100 Ǻ of the sample.
Why Does XPS Need UHV?
Contamination of surface
XPS is a surface sensitive technique. • Contaminates will produce an XPS signal and lead to incorrect analysis of the surface of composition.
The pressure of the vacuum system is < 10-9 Torr
Removing contamination
To remove the contamination the sample surface is bombarded with argon ions (Ar+ = 3KeV). heat and oxygen can be used to remove hydrocarbons
The XPS technique could cause damage to the surface, but it is negligible.
The Atom and the X-Ray X-Ray
Free electron
Valence electrons proton neutron electron
Core electrons
electron vacancy
The core electrons respond very well to the X-Ray energy
X-Rays on the Surface e- top layer e- lower layer with collisions
Atoms layers
e- lower layer but no collisions
Outer surface
X-Rays
Inner surface
X-Rays on the Surface
The X-Rays will penetrate to the core e- of the atoms in the sample.
Some e-s are going to be released without any problem giving the Kinetic Energies (KE) characteristic of their elements.
Other e-s will come from inner layers and collide with other e-s of upper layers
These e- will be lower in lower energy. They will contribute to the noise signal of the spectrum.
X-Rays and the Electrons Electron without collision Electron with collision
The noise signal comes from the electrons that collide with other electrons of different layers. The collisions cause a decrease in energy of the electron and it no longer will contribute to the characteristic energy of the element.
X-Ray
What e-s can the Cylindrical Mirror Analyzer Detect?
The CMA not only can detect electrons from the irradiation of X-Rays, it can also detect electrons from irradiation by the e- gun.
The e- gun it is located inside the CMA while the X-Ray source is located on top of the instrument.
The only electrons normally used in a spectrum from irradiation by the e- gun are known as Auger e-s. Auger electrons are also produced by X-ray irradiation.
X-Rays and Auger Electrons
When the core electron leaves a vacancy an electron of higher energy will move down to occupy the vacancy while releasing energy by: photons Auger electrons
Each Auger electron carries a characteristic energy that can be measured.
Two Ways to Produce Auger Electrons 1. The X-Ray source can irradiate and remove the efrom the core level causing the e- to leave the atom 2. A higher level e- will occupy the vacancy. 3. The energy released is given to a third higher level e-. 4. This is the Auger electron that leaves the atom. The axial e- gun can irradiate and remove the core eby collision. Once the core vacancy is created, the Auger electron process occurs the same way.
Auger Electron Free e- released to analyze
e-
2
3
e- of high energy that will occupy the vacancy of the core level
4
1 e- gun
e- Vacancy
1, 2, 3 and 4 are the order of steps in which the e-s will move in the atom when hit by the e- gun.
Auger Electron Spectroscopy (AES)
Atom layers
e- released from the top layer
Outer surface
Electron beam from the e- gun
Inner surface
Cylindrical Mirror Analyzer (CMA)
The electrons ejected will through a device called a CMA.
The CMA has two concentric metal cylinders at different voltages.
One of the metal cylinders will have a positive voltage and the other will have a 0 voltage. This will create an electric field between the two cylinders.
The voltages on the CMA for XPS and Auger e-s are different.
Cylindrical Mirror Analyzer (CMA)
When the e-s through the metal cylinders, they will collide with one of the cylinders or they will just through.
If the e-’s velocity is too high it will collide with the outer cylinder If is going too slow then will collide with the inner cylinder. Only the e- with the right velocity will go through the cylinders to reach the detector.
With a change in cylinder voltage the acceptable kinetic energy will change and then you can count how many e-s have that KE to reach the detector.
Cylindrical Mirror Analyzer (CMA) X-Rays Source
Electron Pathway through the CMA
Slit
0V
Sample Holder
0V
+V
+V
+V
+V
0V
0V
Detector
Equation KE=hv-BE-Ø KE
Kinetic Energy (measure in the XPS spectrometer)
hv
photon energy from the X-Ray source (controlled)
Ø
spectrometer work function. It is a few eV, it gets more complicated because the materials in the instrument will affect it. Found by calibration.
BE
is the unknown variable
Equation KE=hv-BE-Ø
The equation will calculate the energy needed to get an e- out from the surface of the solid.
Knowing KE, hv and Ø the BE can be calculated.
KE versus BE KE can be plotted depending on BE # of electrons
Each peak represents the amount of e-s at a certain energy that is characteristic of some element. BE increase from right to left 1000 eV E
E
E
Binding energy (eV)
0 eV
KE increase from left to right
Interpreting XPS Spectrum: Background
The X-Ray will hit the e-s in the bulk (inner elayers) of the sample e- will collide with other efrom top layers, decreasing its energy to contribute to the noise, at lower kinetic energy than the peak . The background noise increases with BE because the SUM of all noise is taken from the beginning of the analysis.
N = noise # of electrons
N4 N3
N2 N1
Binding energy
Ntot= N1 + N2 + N3 + N4
XPS Spectrum
The XPS peaks are sharp.
In a XPS graph it is possible to see Auger electron peaks.
The Auger peaks are usually wider peaks in a XPS spectrum.
Aluminum foil is used as an example on the next slide.
O 1s
XPS Spectrum
O Auger
O because of Mg source C
O 2s Al
Sample and graphic provided by William Durrer, Ph.D. Department of Physics at the Univertsity of Texas at El Paso
Al
Auger Spectrum
Characteristic of Auger graphs The graph goes up as KE increases.
Sample and graphic provided by William Durrer, Ph.D. Department of Physics at the Univertsity of Texas at El Paso
Identification of XPS Peaks
The plot has characteristic peaks for each element found in the surface of the sample.
There are tables with the KE and BE already assigned to each element.
After the spectrum is plotted you can look for the designated value of the peak energy from the graph and find the element present on the surface.
X-rays vs. e- Beam
X-Rays
Hit all sample area simultaneously permitting data acquisition that will give an idea of the average composition of the whole surface.
Electron Beam
It can be focused on a particular area of the sample to determine the composition of selected areas of the sample surface.
XPS Technology
Consider as nondestructive
because it produces soft x-rays to induce photoelectron emission from the sample surface
Applications in the industry:
Provide information about surface layers or thin film structures
Polymer surface Catalyst Corrosion Adhesion Semiconductors Dielectric materials Electronics packaging Magnetic media Thin film coatings
References
Dr.William Durrer for explanations on XPS technique, Department of Physics at UTEP. www.uksaf.com www.casaxps.com www.nwsl.net XPS instrument from the Physics Department.
Acknowledgements
Elizabeth Gardner, Ph.D. from the Department of Chemistry at the University of Texas at El Paso
William Durrer, Ph.D. from the Department of Physics at the University of Texas at El Paso
Roberto De La Torre Roche
Lynn Marie Santiago
Outline
XPS Background XPS Instrument How Does XPS Technology Work? Auger Electron Cylindrical Mirror Analyzer (CMA) Equation KE versus BE Spectrum Background Identification of XPS Peaks X-rays vs. e- Beam XPS Technology
XPS Background
XPS technique is based on Einstein’s idea about the photoelectric effect, developed around 1905
The concept of photons was used to describe the ejection of electrons from a surface when photons were impinged upon it
During the mid 1960’s Dr. Siegbahn and his research group developed the XPS technique.
In 1981, Dr. Siegbahn was awarded the Nobel Prize in Physics for the development of the XPS technique
X-Rays
Irradiate the sample surface, hitting the core electrons (e-) of the atoms.
The X-Rays penetrate the sample to a depth on the order of a micrometer.
Useful e- signal is obtained only from a depth of around 10 to 100 Å on the surface.
The X-Ray source produces photons with certain energies: MgK photon with an energy of 1253.6 eV AlK photon with an energy of 1486.6 eV
Normally, the sample will be radiated with photons of a single energy (MgK or AlK). This is known as a monoenergetic XRay beam.
Why the Core Electrons?
An electron near the Fermi level is far from the nucleus, moving in different directions all over the place, and will not carry information about any single atom.
Fermi level is the highest energy level occupied by an electron in a neutral solid at absolute 0 temperature. Electron binding energy (BE) is calculated with respect to the Fermi level.
The core e-s are local close to the nucleus and have binding energies characteristic of their particular element.
The core e-s have a higher probability of matching the energies of AlK and MgK. Valence eCore e-
Atom
Binding Energy (BE) The Binding Energy (BE) is characteristic of the core electrons for each element. The BE is determined by the attraction of the electrons to the nucleus. If an electron with energy x is pulled away from the nucleus, the attraction between the electron and the nucleus decreases and the BE decreases. Eventually, there will be a point when the electron will be free of the nucleus.
0
B.E.
This is the point with 0 energy of attraction between the electron and the nucleus. At this point the electron is free from the atom.
x p+
These electrons are attracted to the proton with certain binding energy x
Energy Levels Vacumm Level
Ø, which is the work function
Fermi Level BE
Lowest state of energy
At absolute 0 Kelvin the electrons fill from the lowest energy states up. When the electrons occupy up to this level the neutral solid is in its “ground state.”
XPS Instrument
University of Texas at El Paso, Physics Department Front view of the Phi 560 XPS/AES/SIMS UHV System
XPS is also known as ESCA (Electron Spectroscopy for Chemical Analysis).
The technique is widely used because it is very simple to use and the data is easily analyzed.
XPS works by irradiating atoms of a surface of any solid material with X-Ray photons, causing the ejection of electrons.
XPS Instrument The XPS is controlled by using a computer system.
The computer system will control the X-Ray type and prepare the instrument for analysis. University of Texas at El Paso, Physics Department Front view of the Phi 560 XPS/AES/SIMS UHV System and the computer system that controls the XPS.
XPS Instrument
University of Texas at El Paso, Physics Department Side view of the Phi 560 XPS/AES/SIMS UHV System
The instrument uses different pump systems to reach the goal of an Ultra High Vacuum (UHV) environment.
The Ultra High Vacuum environment will prevent contamination of the surface and aid an accurate analysis of the sample.
XPS Instrument X-Ray Source
Ion Source SIMS Analyzer
Sample introduction Chamber
Sample Introduction Chamber
The sample will be introduced through a chamber that is in with the outside environment
It will be closed and pumped to low vacuum.
After the first chamber is at low vacuum the sample will be introduced into the second chamber in which a UHV environment exists. First Chamber
Second Chamber UHV
Diagram of the Side View of XPS System X-Ray source Ion source Detector
SIMS Analyzer
Axial Electron Gun
Sample introduction Chamber
Sample Holder sample Roughing Pump
CMA Slits
Ion Pump
How Does XPS Technology Work?
A monoenergetic x-ray beam emits photoelectrons from the from the surface of the sample.
Ultrahigh vacuum environment to eliminate excessive surface contamination.
The X-Rays either of two energies:
Cylindrical Mirror Analyzer (CMA) measures the KE of emitted e-s.
The spectrum plotted by the computer from the analyzer signal.
The binding energies can be determined from the peak positions and the elements present in the sample identified.
Al Ka (1486.6eV) Mg Ka (1253.6 eV)
The x-ray photons The penetration about a micrometer of the sample The XPS spectrum contains information only about the top 10 - 100 Ǻ of the sample.
Why Does XPS Need UHV?
Contamination of surface
XPS is a surface sensitive technique. • Contaminates will produce an XPS signal and lead to incorrect analysis of the surface of composition.
The pressure of the vacuum system is < 10-9 Torr
Removing contamination
To remove the contamination the sample surface is bombarded with argon ions (Ar+ = 3KeV). heat and oxygen can be used to remove hydrocarbons
The XPS technique could cause damage to the surface, but it is negligible.
The Atom and the X-Ray X-Ray
Free electron
Valence electrons proton neutron electron
Core electrons
electron vacancy
The core electrons respond very well to the X-Ray energy
X-Rays on the Surface e- top layer e- lower layer with collisions
Atoms layers
e- lower layer but no collisions
Outer surface
X-Rays
Inner surface
X-Rays on the Surface
The X-Rays will penetrate to the core e- of the atoms in the sample.
Some e-s are going to be released without any problem giving the Kinetic Energies (KE) characteristic of their elements.
Other e-s will come from inner layers and collide with other e-s of upper layers
These e- will be lower in lower energy. They will contribute to the noise signal of the spectrum.
X-Rays and the Electrons Electron without collision Electron with collision
The noise signal comes from the electrons that collide with other electrons of different layers. The collisions cause a decrease in energy of the electron and it no longer will contribute to the characteristic energy of the element.
X-Ray
What e-s can the Cylindrical Mirror Analyzer Detect?
The CMA not only can detect electrons from the irradiation of X-Rays, it can also detect electrons from irradiation by the e- gun.
The e- gun it is located inside the CMA while the X-Ray source is located on top of the instrument.
The only electrons normally used in a spectrum from irradiation by the e- gun are known as Auger e-s. Auger electrons are also produced by X-ray irradiation.
X-Rays and Auger Electrons
When the core electron leaves a vacancy an electron of higher energy will move down to occupy the vacancy while releasing energy by: photons Auger electrons
Each Auger electron carries a characteristic energy that can be measured.
Two Ways to Produce Auger Electrons 1. The X-Ray source can irradiate and remove the efrom the core level causing the e- to leave the atom 2. A higher level e- will occupy the vacancy. 3. The energy released is given to a third higher level e-. 4. This is the Auger electron that leaves the atom. The axial e- gun can irradiate and remove the core eby collision. Once the core vacancy is created, the Auger electron process occurs the same way.
Auger Electron Free e- released to analyze
e-
2
3
e- of high energy that will occupy the vacancy of the core level
4
1 e- gun
e- Vacancy
1, 2, 3 and 4 are the order of steps in which the e-s will move in the atom when hit by the e- gun.
Auger Electron Spectroscopy (AES)
Atom layers
e- released from the top layer
Outer surface
Electron beam from the e- gun
Inner surface
Cylindrical Mirror Analyzer (CMA)
The electrons ejected will through a device called a CMA.
The CMA has two concentric metal cylinders at different voltages.
One of the metal cylinders will have a positive voltage and the other will have a 0 voltage. This will create an electric field between the two cylinders.
The voltages on the CMA for XPS and Auger e-s are different.
Cylindrical Mirror Analyzer (CMA)
When the e-s through the metal cylinders, they will collide with one of the cylinders or they will just through.
If the e-’s velocity is too high it will collide with the outer cylinder If is going too slow then will collide with the inner cylinder. Only the e- with the right velocity will go through the cylinders to reach the detector.
With a change in cylinder voltage the acceptable kinetic energy will change and then you can count how many e-s have that KE to reach the detector.
Cylindrical Mirror Analyzer (CMA) X-Rays Source
Electron Pathway through the CMA
Slit
0V
Sample Holder
0V
+V
+V
+V
+V
0V
0V
Detector
Equation KE=hv-BE-Ø KE
Kinetic Energy (measure in the XPS spectrometer)
hv
photon energy from the X-Ray source (controlled)
Ø
spectrometer work function. It is a few eV, it gets more complicated because the materials in the instrument will affect it. Found by calibration.
BE
is the unknown variable
Equation KE=hv-BE-Ø
The equation will calculate the energy needed to get an e- out from the surface of the solid.
Knowing KE, hv and Ø the BE can be calculated.
KE versus BE KE can be plotted depending on BE # of electrons
Each peak represents the amount of e-s at a certain energy that is characteristic of some element. BE increase from right to left 1000 eV E
E
E
Binding energy (eV)
0 eV
KE increase from left to right
Interpreting XPS Spectrum: Background
The X-Ray will hit the e-s in the bulk (inner elayers) of the sample e- will collide with other efrom top layers, decreasing its energy to contribute to the noise, at lower kinetic energy than the peak . The background noise increases with BE because the SUM of all noise is taken from the beginning of the analysis.
N = noise # of electrons
N4 N3
N2 N1
Binding energy
Ntot= N1 + N2 + N3 + N4
XPS Spectrum
The XPS peaks are sharp.
In a XPS graph it is possible to see Auger electron peaks.
The Auger peaks are usually wider peaks in a XPS spectrum.
Aluminum foil is used as an example on the next slide.
O 1s
XPS Spectrum
O Auger
O because of Mg source C
O 2s Al
Sample and graphic provided by William Durrer, Ph.D. Department of Physics at the Univertsity of Texas at El Paso
Al
Auger Spectrum
Characteristic of Auger graphs The graph goes up as KE increases.
Sample and graphic provided by William Durrer, Ph.D. Department of Physics at the Univertsity of Texas at El Paso
Identification of XPS Peaks
The plot has characteristic peaks for each element found in the surface of the sample.
There are tables with the KE and BE already assigned to each element.
After the spectrum is plotted you can look for the designated value of the peak energy from the graph and find the element present on the surface.
X-rays vs. e- Beam
X-Rays
Hit all sample area simultaneously permitting data acquisition that will give an idea of the average composition of the whole surface.
Electron Beam
It can be focused on a particular area of the sample to determine the composition of selected areas of the sample surface.
XPS Technology
Consider as nondestructive
because it produces soft x-rays to induce photoelectron emission from the sample surface
Applications in the industry:
Provide information about surface layers or thin film structures
Polymer surface Catalyst Corrosion Adhesion Semiconductors Dielectric materials Electronics packaging Magnetic media Thin film coatings
References
Dr.William Durrer for explanations on XPS technique, Department of Physics at UTEP. www.uksaf.com www.casaxps.com www.nwsl.net XPS instrument from the Physics Department.
Acknowledgements
Elizabeth Gardner, Ph.D. from the Department of Chemistry at the University of Texas at El Paso
William Durrer, Ph.D. from the Department of Physics at the University of Texas at El Paso
Roberto De La Torre Roche
Lynn Marie Santiago
Related Documents c2h70
X-ray Photo Electron Spectroscopy (xps) 6r3k63
July 2021 0
Bahan X-ray Photoelectron Spectroscopy (xps) 3b254j
November 2019 94
[john F. Moulder] Phi Handbook Of Xray Photoelectron Spectroscopy 613h2o
November 2019 64
Xray Films 242h42
November 2021 0
Xps-10_tonelist_e01 1a5a4n
August 2021 0
Xray Sg 3o2v5t
December 2019 59More Documents from "Sinem Eraslan" 2q4r1c
X-ray Photo Electron Spectroscopy (xps) 6r3k63
July 2021 0