Varistor Mdc Z151 09ul 58635m
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 2z6p3t
Overview 5o1f4z
& View Varistor Mdc Z151 09ul as PDF for free.
More details 6z3438
- Words: 22,499
- Pages: 32
STANDARD • SERIES
STANDARD SERIES INTRODUCTION The Standard Series is our broadest and most comprehensive line of radial-leaded varistors. These components consist of wire leads and have nominal disk diameters from 3mm to 25mm. They are available with maximum continuous operating voltages (MCOV) ranging from 11VAC to 1000VAC. The Standard Series is designed to handle most low and medium power applications requiring through-hole components. Most sizes are available in Tape and Reel and ammo pack. Style Designation The Maida style number is the primary means to identify our components when ordered. The style number identifies several parameters that are important for the characteristics of the device. Observe the following part numbering system when ordering our components: D _ _ _ _ ZOV_ _ _ RA _ _ _ 1. Coating Designation D – Standard Epoxy Coating No code with 31 lead code denotes no coating. 2. Nominal Disk Diameter 56 – 3mm 79 – 15mm 58 – 5mm 64 – 16mm 73 – 7mm 63 – 18mm 61 – 10mm 65 – 20mm 71 – 11mm 66 – 25mm 62 – 12mm 69 – 14mm 3. Lead Configuration code (refer to lead codes) 4. Material Identifier, zinc-oxide varistor 5. AC Voltage Rating code, two significant figures plus number of zeroes that follow, e.g. 511 is 510 VAC 6. Special Instructions code, RA is standard 7. Energy Rating code, up to three numbers (refer to ratings tables)
Standard Marking Minimum marking information shall consist of an abbreviated style designation and, when space is available, the manufacturer’s initials "MDC" or the company logo. For example: MDC Z511 110UL Where: Z – Represents "ZOV" 511 – AC voltage rating code 110 – Energy rating code UL – UL recognition if applicable A manufacturing date code is available upon request. Other safety agency designations are included if applicable. How to Order the Standard Series The following specifications tables provide a way to match the Maida style number to a varistor that provides the necessary specifications for a specific application. Once the general style number is obtained, it will be necessary to determine the required lead configuration. Refer to the lead codes section and add the required code to the Maida style number when ordering. Custom lead configurations are available. our engineering department for additional information. Dimensions such as mounting height above the seating plane, lead spacing, and maximum thickness with regards to each lead code is available in the mechanical dimensions tables.
An example of a typical Maida style number is D6521ZOV151RA20. This style number displays a nominal disk size of 20mm, a standard lead code showing straight wire leads, a maximum AC continuous operating voltage of 150 VAC.
For more information call us at (757) 723-0785 or e-mail us at: [email protected]
2
STANDARD SERIES SPECIFICATIONS
11, 14, and 17 VAC Varistors Continuous
D58ZOV110RA00 D73ZOV110RA01 D6121ZOV110RA02 D6921ZOV110RA04 D6521ZOV110RA10
Recognitions To Nominal Safety Size Agency Standards A B C D E F (mm) X X 5 X X 7 X X 10 X X 14 X X 20
D56ZOV140RA0R1 D58ZOV140RA00 D73ZOV140RA01 D6121ZOV140RA02 D6921ZOV140RA04 D6521ZOV140RA13
X X X X X
X X X X X
3 5 7 10 14 20
D56ZOV170RAR12 D58ZOV170RA00 D73ZOV170RA01 D6121ZOV170RA03 D6921ZOV170RA05 D6521ZOV170RA15
X X X X X
X X X X X
3 5 7 10 14 20
Maida Style Number
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
(AC) 11 11 11 11 11
(DC) 14 14 14 14 14
10 x 1000 µ sec (J) 0.6 1.1 2.6 5.2 13
Z14 Z140 - 00UL Z140 - 01UL Z140 - 02UL Z140 - 04UL Z140 - 13UL
14 14 14 14 14 14
18 18 18 18 18 18
0.1 0.7 1.3 3.2 6.3 16
N/A N/A N/A N/A N/A N/A
50 250 500 1000 2000 3000
25 125 250 500 1000 2000
20 20 20 20 20 20
24 24 24 24 24 24
55 48 43 43 43 43
1 1 2.5 5 10 20
500 2000 2800 6000 15000 30000
Z17 Z170 - 00UL Z170 - 01UL Z170 - 03UL Z170 - 05UL Z170 - 15UL
17 17 17 17 17 17
22 22 22 22 22 22
0.12 0.9 1.6 3.9 7.8 19
N/A N/A N/A N/A N/A N/A
50 250 500 1000 2000 3000
25 125 250 500 1000 2000
24 24 24 24 24 24
30 30 30 30 30 30
67 60 53 53 53 53
1 1 2.5 5 10 20
400 1600 2000 4000 10000 22000
Z110 Z110 Z110 Z110 Z110
-
00UL 01UL 02UL 04UL 10UL
8 x 20 µ sec (J) N/A N/A N/A N/A N/A
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 250 125 500 250 1000 500 2000 1000 3000 2000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20µ sec) (V) (V) (V) (A) (pF) 16 20 40 1 2200 16 20 36 2.5 3500 16 20 36 5 7500 16 20 36 10 18000 16 20 36 20 37000
NOTES: NOTES: A = UL1449 File E86730 - Transient Voltage Surgeand Suppression D = Agencies. VDE/CECC 42000/42201 & IEC 1051 Appendix A lists the single-pulse peak current energy ratings on file with the Safety B = UL1414 Filetransient E38785rating - Across - The in Line = UL497B - File E180012 Maximum specified thisApplications table are valid. They may differ from thoseEshown in Appendix A. A = UL1449 FileLR33458 E86730 - Transient Voltage Surge Suppression D = VDE/CECC & IEC 1051 C = CSA C22.2 File F = SEV 42000/42201 - 96.7 70250.01 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) [ Size code
H
D
]
Z
d
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81]
Y D56 D58 D73 D61 D69 D65
0.322 0.197 [8.18] [5.00] 0.423 0.298 [10.74] [7.57] 0.472 0.354 [11.99] [8.99] 0.597 0.472 [15.16] [11.99] 0.770 0.650 [19.56] [16.51] 1.020 0.905 [25.91] [22.99]
OFFSET AND THICKNESS 14 17 VAC VAC T Y T Y T 0.069 0.165 0.080 0.170 N/A [1.75] [4.19] [2.03] [4.32] 0.161 0.074 0.165 0.085 0.170 [4.09] [1.88] [4.19] [2.16] [4.32] 0.161 0.074 0.165 0.085 0.170 [4.09] [1.88] [4.19] [2.16] [4.32] 0.161 0.081 0.165 0.092 0.170 [4.09] [2.06] [4.19] [2.34] [4.32] 0.161 0.081 0.165 0.092 0.170 [4.09] [2.06] [4.19] [2.34] [4.32] 0.161 0.081 0.165 0.092 0.170 [4.09] [2.06] [4.19] [2.34] [4.32]
11 VAC N/A 0.065 [1.65] 0.065 [1.65] 0.072 [1.83] 0.072 [1.83] 0.072 [1.83]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
3
STANDARD SERIES SPECIFICATIONS
20, 25, and 30 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
A B C D E F
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
Z20 Z200 - 00UL Z200 - 01UL Z200 - 03UL Z200 - 06UL Z200 - 20UL
(AC) 20 20 20 20 20 20
(DC) 26 26 26 26 26 26
10 x 1000 µ sec (J) 0.15 1.1 2 4.8 9.5 24
8 x 20 µ sec (J) N/A N/A N/A N/A N/A N/A
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 50 25 250 125 500 250 1000 500 2000 1000 3000 2000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) (V) (V) (A) (pF) 30 36 73 1 487 30 36 73 1 1675 30 36 65 2.5 3614 30 36 65 5 6655 30 36 65 10 14447 30 36 65 20 33064
D56ZOV200RA0R15 D58ZOV200RA00 D73ZOV200RA01 D6121ZOV200RA03 D6921ZOV200RA06 D6521ZOV200RA20
X X X X X
X X X X X
(mm) 3 5 7 10 14 20
D56ZOV250RA0R18 D58ZOV250RA01 D73ZOV250RA02 D6121ZOV250RA04 D6921ZOV250RA07 D6521ZOV250RA24
X X X X X
X X X X X
3 5 7 10 14 20
Z25 Z250 - 01UL Z250 - 02UL Z250 - 04UL Z250 - 07UL Z250 - 24UL
25 25 25 25 25 25
31 31 31 31 31 31
0.18 1.2 2.4 5.6 11 28
N/A N/A N/A N/A N/A N/A
50 250 500 1000 2000 3000
25 125 250 500 1000 2000
35 35 35 35 35 35
43 43 43 43 43 43
86 86 77 77 77 77
1 1 2.5 5 10 20
412 1417 3058 5632 12225 27977
D56ZOV300RA0R2 D58ZOV300RA01 D73ZOV300RA02 D6121ZOV300RA05 D6921ZOV300RA09 D6321ZOV300RA26 D6521ZOV300RA30
X X X X X X
X X X X X X
3 5 7 10 14 18 20
Z30 Z300 - 01UL Z300 - 02UL Z300 - 05UL Z300 - 09UL Z300 - 26UL Z300 - 30UL
30 30 30 30 30 30 30
38 38 38 38 38 38 38
0.2 1.5 2.8 6.8 14 26 34
N/A N/A N/A N/A N/A N/A N/A
50 250 500 1000 2000 2500 3000
25 125 250 500 1000 1500 2000
42 42 42 42 42 42 42
52 52 52 52 52 52 52
99 99 93 93 93 93 93
1 1 2.5 5 10 20 20
342 1176 2537 4673 10144 18230 23215
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D61 D69 D63 D65
H
D
Z
d
0.322 [8.18] 0.423 [10.74] 0.479 [12.17] 0.597 [15.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16]
0.197 [5.00] 0.298 [7.57] 0.354 [8.99] 0.472 [11.99] 0.650 [16.51] 0.812 [20.62] 0.905 [22.99]
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81]
OFFSET AND THICKNESS 25 30 VAC VAC T Y T Y T 0.176 0.059 0.182 0.067 0.190 [4.47] [1.50] [4.62] [1.70] [4.83] 0.176 0.064 0.182 0.072 0.190 [4.47] [1.63] [4.62] [1.83] [4.83] 0.176 0.064 0.182 0.072 0.190 [4.47] [1.63] [4.62] [1.83] [4.83] 0.176 0.071 0.182 0.079 0.190 [4.47] [1.80] [4.62] [2.00] [4.83] 0.176 0.071 0.182 0.079 0.190 [4.47] [1.80] [4.62] [2.00] [4.83] 0.079 0.190 N/A N/A N/A [2.00] [4.83] 0.176 0.071 0.182 0.079 0.190 [4.47] [1.80] [4.62] [2.00] [4.83]
20 VAC Y 0.053 [1.35] 0.058 [1.47] 0.058 [1.47] 0.065 [1.65] 0.065 [1.65] N/A 0.065 [1.65]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
4
STANDARD SERIES SPECIFICATIONS
35, 40, and 50 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
D56ZOV350RA0R25 D58ZOV350RA01 D73ZOV350RA02 D6121ZOV350RA06 D6921ZOV350RA10 D6521ZOV350RA35
X X X X X
X X X X X
(mm) 3 5 7 10 14 20
Z35 Z350 - 01UL Z350 - 02UL Z350 - 06UL Z350 - 10UL Z350 - 35UL
(AC) 35 35 35 35 35 35
(DC) 45 45 45 45 45 45
10 x 1000 µ sec (J) 0.25 1.8 3.4 8.1 16 41
D56ZOV400RA0R3 D58ZOV400RA01 D73ZOV400RA03 D6121ZOV400RA07 D6921ZOV400RA12 D6521ZOV400RA40
X X X X X
X X X X X
3 5 7 10 14 20
Z40 Z400 - 01UL Z400 - 03UL Z400 - 07UL Z400 - 12UL Z400 - 40UL
40 40 40 40 40 40
56 56 56 56 56 56
0.3 2.2 5.2 13 20 49
N/A N/A N/A N/A N/A N/A
50 250 500 1000 2000 3000
25 125 250 500 1000 2000
61 61 61 61 61 61
75 75 75 75 75 75
138 138 135 135 135 135
1 1 2.5 5 10 20
133 438 945 1627 3285 7517
D56ZOV500RA0R4 D58ZOV500RA01 D73ZOV500RA02 D6121ZOV500RA03 D7121ZOV500RA04 D6221ZOV500RA05 D6921ZOV500RA06 D6521ZOV500RA42
X X X X X X X
X X X
3 5 7 10 11 12 14 20
Z50 Z500 - 01UL Z500 - 02UL Z500 - 03UL Z500 - 04UL Z500 - 05UL Z500 - 06UL Z500 - 42UL
50 50 50 50 50 50 50 50
66 66 66 66 66 66 66 66
0.4 3.5 7 14 19 22 28 56
N/A N/A N/A N/A N/A N/A N/A N/A
50 800 1750 3500 4000 4500 6000 10000
25 600 1250 2500 2800 3200 5000 7000
74 74 74 74 74 74 74 74
90 90 90 90 90 90 90 90
163 163 157 147 147 147 147 147
2 5 10 25 30 40 50 100
109 364 767 1375 1533 2602 2829 5041
A B C D E F
X X X
8 x 20 µ sec (J) N/A N/A N/A N/A N/A N/A
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 50 25 250 125 500 250 1000 500 2000 1000 3000 2000
Electrical Characteristics Max Varistor Clamping Typical Cap. Voltage Voltage @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20µ sec) (V) (V) (V) (A) (pF) 50 62 117 1 287 50 62 117 1 987 50 62 110 2.5 2130 50 62 110 5 3922 50 62 110 10 8514 50 62 110 20 19484
NOTES: NOTES: A = UL1449 FileA E86730 Transient Voltage Surge and Suppression = file VDE/CECC 42000/42201 & IEC 1051 Appendix lists the -single-pulse peak current energy ratingsDon with the Safety Agencies. B = UL1414 Filetransient E38785 rating - Across - The Line Applications E =differ UL497B File E180012 Maximum specified in this table are valid. They may from -those shown in Appendix A. C = CSA File LR33458 A = C22.2 UL1449 File E86730 - Transient Voltage Surge Suppression F = SEV - 96.7 D = 70250.01 VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D61 D71 D62 D69 D65
H
D
Z
d
0.322 [8.18] 0.423 [10.74] 0.479 [12.17] 0.597 [15.16] 0.656 [16.66] 0.715 [18.16] 0.775 [19.69] 1.030 [26.16]
0.197 [5.07] 0.298 [7.57] 0.354 [8.99] 0.472 [11.99] 0.531 [13.49] 0.590 [14.99] 0.650 [16.51] 0.905 [22.99]
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81]
OFFSET AND THICKNESS 40 50 VAC VAC T Y T Y T 0.199 0.054 0.211 0.039 0.174 [5.05] [1.37] [5.36] [0.99] [4.42] 0.199 0.059 0.211 0.046 0.174 [5.05] [1.50] [5.36] [1.17] [4.42] 0.199 0.059 0.211 0.046 0.174 [5.05] [1.50] [5.36] [1.17] [4.42] 0.199 0.066 0.211 0.054 0.174 [5.05] [1.68] [5.36] [1.37] [4.42] 0.054 0.174 N/A N/A N/A [1.37] [4.42] 0.054 0.174 N/A N/A N/A [1.37] [4.42] 0.199 0.066 0.211 0.055 0.174 [5.05] [1.68] [5.36] [1.40] [4.42] 0.199 0.066 0.211 0.055 0.225 [5.05] [1.68] [5.36] [1.40] [5.72]
35 VAC Y 0.076 [1.93] 0.081 [2.06] 0.081 [2.06] 0.088 [2.24] N/A N/A 0.088 [2.24] 0.088 [2.24]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
5
STANDARD SERIES SPECIFICATIONS
60, 75, and 95 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
A B C D E F D56ZOV600RA0R5 D58ZOV600RA01 D73ZOV600RA02 D6121ZOV600RA03 D7121ZOV600RA04 D6221ZOV600RA05 D6921ZOV600RA06 D6521ZOV600RA45
X X X X X X X
X X X
D56ZOV750RA0R6 D58ZOV750RA01 D73ZOV750RA02 D6121ZOV750RA03 D7121ZOV750RA04 D6221ZOV750RA05 D6921ZOV750RA06 D6521ZOV750RA55
X X X X X X X
X X X
D56ZOV950RA0R7 D58ZOV950RA01 D73ZOV950RA02 D6121ZOV950RA03 D7121ZOV950RA04 D6221ZOV950RA05 D6921ZOV950RA06 D6521ZOV950RA65
X X X X X X X
X X X
X X X
X X X
X X X
Continuous Nominal Size
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy 8 x 20 µ sec (J) N/A N/A N/A N/A N/A N/A N/A N./A
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 50 25 800 600 1750 1250 3500 2500 4000 2800 4500 3200 6000 5000 10000 7000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) (V) (V) (A) (pF) 90 110 200 2 92 90 110 190 5 299 90 110 180 10 629 90 110 175 25 1128 90 110 175 30 1257 90 110 175 40 2133 90 110 175 50 2319 90 110 175 100 5264
(mm) 3 5 7 10 11 12 14 20
Z60 Z600 - 01UL Z600 - 02UL Z600 - 03UL Z600 - 04UL Z600 - 05UL Z600 - 06UL Z600 - 45UL
(AC) 60 60 60 60 60 60 60 60
(DC) 81 81 81 81 81 81 81 81
10 x 1000 µ sec (J) 0.5 4.5 9 18 20 22 36 72
3 5 7 10 11 12 14 20
Z75 Z750 - 01UL Z750 - 02UL Z750 - 03UL Z750 - 04UL Z750 - 05UL Z750 - 06UL Z750 - 55UL
75 75 75 75 75 75 75 75
102 102 102 102 102 102 102 102
0.6 5.5 11 22 22 27 44 88
N/A N/A N/A N/A N/A N/A N/A N./A
100 800 1750 3500 4000 4500 6000 10000
50 600 1250 2500 2800 3200 5000 7000
108 108 108 108 108 108 108 108
132 132 132 132 132 132 132 132
220 220 220 210 210 210 210 210
2 5 10 25 30 40 50 100
77 249 524 940 1048 1778 1933 4387
3 5 7 10 11 12 14 20
Z95 Z950 - 01UL Z950 - 02UL Z950 - 03UL Z950 - 04UL Z950 - 05UL Z950 - 06UL Z950 - 65UL
95 95 95 95 95 95 95 95
127 127 127 127 127 127 127 127
0.7 6.6 13 25 28 33 53 106
N/A N/A N/A N/A N/A N/A N/A N/A
100 800 1750 3500 4000 4500 6000 10000
50 600 1250 2500 2800 3200 5000 7000
135 135 135 135 135 135 135 135
165 165 165 165 165 165 165 165
240 240 255 255 255 255 255 255
2 5 10 25 30 40 50 100
34 118 255 469 537 924 1019 2331
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D61 D71 D62 D69 D65
H
D
0.322 0.197 [8.18] [5.0] 0.423 0.298 [10.74] [7.57] 0.479 0.354 [12.17] [8.99] 0.597 0.472 [15.16] [12.0] 0.656 0.531 [16.66] [13.49] 0.715 0.590 [18.16] [15.0] 0.775 0.650 [19.69] [16.51] 1.030 0.905 [26.16] [22.99]
Z
d
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81]
OFFSET AND THICKNESS 75 95 VAC VAC T Y T Y T 0.243 0.48 0.184 0.047 0.191 [6.17] [1.22] [4.67] [1.19] [4.85] 0.243 0.055 0.184 0.052 0.191 [6.17] [1.40] [4.67] [1.32] [4.85] 0.178 0.056 0.184 0.052 0.191 [4.52] [1.42] [4.67] [1.32] [4.85] 0.178 0.064 0.184 0.059 0.191 [4.52] [1.63] [4.67] [1.50] [4.85] 0.178 0.064 0.184 0.059 0.191 [4.52] [1.63] [4.67] [1.50] [4.85] 0.178 0.065 0.184 0.059 0.191 [4.52] [1.65] [4.67] [1.50] [4.85] 0.178 0.065 0.184 0.059 0.191 [4.52] [1.65] [4.67] [1.50] [4.85] 0.243 0.066 0.172 0.059 0.179 [6.17] [1.68] [4.37] [1.50] [4.55]
60 VAC Y 0.044 [1.12] 0.050 [1.27] 0.051 [1.30] 0.058 [1.47] 0.059 [1.15] 0.059 [1.15] 0.060 [1.52] 0.060 [1.52]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
6
STANDARD SERIES SPECIFICATIONS 120 and 130 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
A B C D E F D56ZOV121RA0R9 D58ZOV121RA02 D73ZOV121RA03 D68ZOV121RA03 D6121ZOV121RA04 D7121ZOV121RA05 D6221ZOV121RA07 D6921ZOV121RA09 D6421ZOV121RA10 D6321ZOV121RA65 D6521ZOV121RA20
X X X X X X X X X X X X X X X X
X X X X X X X X X
D56ZOV131RA1R0 D58ZOV131RA02 D73ZOV131RA03 D68ZOV131RA03 D6121ZOV131RA04 D7121ZOV131RA05 D6221ZOV131RA07 D6921ZOV131RA09 D6421ZOV131RA10 D6321ZOV131RA70 D6521ZOV131RA20 D6694ZOV131RA140
X X X X X X X X X X X X X X X X X X X
X X X X X X X X X X
X X X X X
X
X X X X X X X X X X X X X X X X X X X X X X X
Minimum Marking
Maximum Ratings Transient Energy
Applied Voltage
(mm) 3 5 7 8 10 11 12 14 16 18 20
Z121 Z121 - 02UL Z121 - 03UL Z121 - 03UL Z121 - 04UL Z121 - 05UL Z121 - 07UL Z121 - 09UL Z121 - 10UL Z121 - 65UL Z121 - 20UL
(AC) 120 120 120 120 120 120 120 120 120 120 120
(DC) 160 160 160 160 160 160 160 160 160 160 160
10 x 1000 µ sec (J) 0.9 8 16 19 33 36 41 52 58 65 130
3 5 7 8 10 11 12 14 16 18 20 25
Z131 Z131 - 02UL Z131 - 03UL Z131 - 03UL Z131 - 04UL Z131 - 05UL Z131 - 07UL Z131 - 09UL Z131 - 10UL Z131 - 70UL Z131 - 20UL Z131 - 140UL
130 130 130 130 130 130 130 130 130 130 130 130
175 175 175 175 175 175 175 175 175 175 175 175
1 8.5 17.5 27 45 48 53 70 100 130 150 170
8 x 20 µ sec (J) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1 8.5 17.5 27 45 48 53 70 100 130 150 170
Electrical Characteristics
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 2500 1700 3500 2500 4000 2800 4500 3200 6000 5000 6300 5300 7500 6500 10000 7000
Vmin (V) 170 170 170 170 170 170 170 170 170 170 170
Vmax (V) 207 207 207 207 207 207 207 207 207 207 207
100 800 1750 2300 3500 4000 4500 6500 7700 9000 12000 18000
184 184 184 184 184 184 184 184 184 184 184 184
224 224 224 224 224 224 224 224 224 224 224 224
50 600 1250 1500 2500 2800 3200 5000 6000 7000 9000 13000
Varistor Voltage @1 mA DC
Max Clamping Voltage (@Test Current) (8 x 20 µ sec) (V) (A) 310 2 310 5 320 10 320 15 320 25 320 30 320 40 320 50 320 70 320 100 320 100 350 350 340 340 340 340 340 340 340 340 340 340
2 5 10 15 25 30 40 50 70 100 100 100
Typical Cap. 1 V rms @1kHz (pF) 34 118 255 327 469 537 924 1019 1506 1830 2331 34 116 250 316 438 494 835 890 1304 1571 2001 3634
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D68 D61 D71 D62 D69 D64 D63 D65 D66
H
D
Z
d
0.322 [8.18] 0.423 [10.74] 0.479 [12.17] 0.519 [13.18] 0.597 [15.16] 0.656 [16.66] 0.715 [18.16] 0.775 [19.69] 0.835 [21.21] 0.912 [23.16] 1.030 [26.16] 1.250 [31.75]
0.197 [5.0] 0.298 [7.57] 0.354 [4.31] 0.394 [10.0] 0.472 [12.0] 0.531 [13.49] 0.590 [14.99] 0.650 [16.51] 0.710 [18.03] 0.787 [19.99] 0.905 [22.99] 1.100 [27.94]
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.500 [12.7]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 120 VAC Y T 0.054 0.201 [1.37] [5.11] 0.061 0.204 [1.55] [5.18] 0.059 0.201 [1.50] [5.11] 0.059 0.201 [1.50] [5.11] 0.066 0.201 [1.68] [5.11] 0.066 0.201 [1.68] [5.11] 0.066 0.201 [1.68] [5.11] 0.066 0.201 [1.68] [5.11] 0.066 0.201 [1.68] [5.11] 0.066 0.201 [1.68] [5.11] 0.066 0.201 [1.68] [5.11] N/A
N/A
THICKNESS 130 VAC Y T 0.056 0.204 [1.42] [5.18] 0.065 0.208 [1.65] [5.28] 0.061 0.204 [1.55] [5.18] 0.061 0.204 [1.55] [5.18] 0.068 0.204 [1.73] [5.18] 0.068 0.204 [1.73] [5.18] 0.068 0.204 [1.73] [5.18] 0.068 0.204 [1.73] [5.18] 0.068 0.204 [1.73] [5.18] 0.068 0.204 [1.73] [5.18] 0.068 0.204 [1.73] [5.18] 0.076 0.198 [1.93] [5.03]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
7
STANDARD SERIES SPECIFICATIONS 140 and 150 VAC Varistors Recognitions Maida Style Number
D56ZOV141RA1R1 D58ZOV141RA02 D73ZOV141RA03 D68ZOV141RA03 D6121ZOV141RA04 D7121ZOV141RA05 D6221ZOV141RA07 D6921ZOV141RA09 D6421ZOV141RA10 D6321ZOV141RA75 D6521ZOV141RA20 D6694ZOV141RA150
To Nominal Safety Size Agency Standards A B C D E F (mm) 3 X X X X 5 X X X X X X 7 X X 8 X X X X X X 10 X X X X X 11 X X X X X X 12 X X X X X X 14 X X 16 X X X X 18 X X X X X X 20 X X X X 25
D56ZOV151RA1R2 D58ZOV151RA02 D73ZOV151RA03 D68ZOV151RA03 D6121ZOV151RA04 D7121ZOV151RA05 D6221ZOV151RA07 D6921ZOV151RA09 D6421ZOV151RA10 D6321ZOV151RA80 D6521ZOV151RA20 D6694ZOV151RA160
X X X X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
Maximum Ratings Transient
Continuous
3 5 7 8 10 11 12 14 16 18 20 25
Minimum Marking
Energy Applied Voltage
Z141 Z141 - 02UL Z141 - 03UL Z141 - 03UL Z141 - 04UL Z141 - 05UL Z141 - 07UL Z141 - 09UL Z141 - 10UL Z141 - 75UL Z141 - 20UL Z141 - 150UL
(AC) 140 140 140 140 140 140 140 140 140 140 140 140
(DC) 180 180 180 180 180 180 180 180 180 180 180 180
10 x 1000 µ sec (J) 1.1 9 20 30 50 54 59 78 106 135 160 180
Z151 Z151 - 02UL Z151 - 03UL Z151 - 03UL Z151 - 04UL Z151 - 05UL Z151 - 07UL Z151 - 09UL Z151 - 10UL Z151 - 80UL Z151 - 20UL Z151 - 160UL
150 150 150 150 150 150 150 150 150 150 150 150
200 200 200 200 200 200 200 200 200 200 200 200
1.2 10.5 21 30 55 58 64 84 112 140 170 190
8 x 20 µ sec (J) 1.1 9 20 30 50 54 59 78 106 135 160 180 1.2 10.5 21 30 55 58 64 84 112 140 170 190
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 2400 1700 3500 2500 4000 2800 4500 3200 6500 5000 7700 6000 9000 7000 12000 9000 18000 13000 100 800 1750 2300 3500 4000 4500 6500 7700 9000 12000 18000
50 600 1250 1500 2500 2800 3200 5000 6000 7000 9000 13000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) (V) (V) (A) (pF) 198 242 380 2 33 198 242 380 5 111 198 242 360 10 232 198 242 360 15 293 198 242 360 25 407 198 242 360 30 458 198 242 360 40 775 198 242 360 50 825 198 242 360 70 1209 198 242 360 100 1457 198 242 360 100 1855 198 242 360 100 3370 212 212 212 212 212 212 212 212 212 212 212 212
259 259 259 259 259 259 259 259 259 259 259 259
430 430 395 395 395 395 395 395 395 395 395 395
2 5 10 15 25 30 40 50 70 100 100 100
NOTES: NOTES: A = UL1449 FileAE86730 Transient Voltage Surge and Suppression D =the VDE/CECC 42000/42201 & IEC 1051 Appendix lists the-single-pulse peak current energy ratings on file with Safety Agencies. B = UL1414 Filetransient E38785 -rating Across - The Line Applications E = those UL497B - Filein E180012 Maximum specified in this table are valid. They may differ from shown Appendix A. C = CSA File LR33458 F =D SEV - 96.7 70250.01 A = C22.2 UL1449 File E86730 - Transient Voltage Surge Suppression = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D68 D61 D71 D62 D69 D64 D63 D65 D66
H
D
Z
d
0.322 [8.18] 0.423 [10.74] 0.479 [12.17] 0.519 [13.18] 0.597 [15.16] 0.656 [16.66] 0.715 [18.16] 0.775 [19.69] 0.835 [21.21] 0.912 [23.16] 1.030 [26.16] 1.250 [31.75]
0.197 [5.00] 0.298 [7.57] 0.354 [8.99] 0.394 [10.00] 0.472 [11.99] 0.531 [13.49] 0.590 [14.99] 0.650 [16.51] 0.710 [18.03] 0.787 [19.99] 0.905 [22.99] 1.100 [27.94]
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.500 [12.7]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 140 VAC Y T 0.060 0.208 [1.52] [5.28] 0.065 0.208 [1.65] [5.28] 0.065 0.208 [1.65] [5.28] 0.065 0.208 [1.65] [5.28] 0.072 0.208 [1.83] [5.28] 0.072 0.208 [1.83] [5.28] 0.072 0.208 [1.83] [5.28] 0.072 0.208 [1.83] [5.28] 0.072 0.208 [1.83] [5.28] 0.072 0.208 [1.83] [5.28] 0.072 0.208 [1.83] [5.28] 0.080 0.202 [2.03] [5.14]
THICKNESS 150 VAC Y T 0.064 0.212 [1.63] [5.38] 0.069 0.212 [1.75] [5.38] 0.069 0.212 [1.75] [5.38] 0.069 0.212 [1.75] [5.38] 0.076 0.212 [1.93] [5.38] 0.076 0.212 [1.93] [5.38] 0.076 0.212 [1.93] [5.38] 0.076 0.212 [1.93] [5.38] 0.076 0.212 [1.93] [5.38] 0.076 0.212 [1.93] [5.38] 0.076 0.212 [1.93] [5.38] 0.084 0.207 [2.13] [5.26]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
8
30 101 212 268 373 420 710 756 1108 1336 1701 3089
STANDARD SERIES SPECIFICATIONS
180 and 210 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Nominal Size
A B C D E F D56ZOV181RA1R3 D58ZOV181RA02 D73ZOV181RA03 D68ZOV181RA03 D6121ZOV181RA04 D6221ZOV181RA07 D6921ZOV181RA09 D6321ZOV181RA100 D6521ZOV181RA20 D6694ZOV181RA200
X X X X X X X X X X X X X X X X
D56ZOV211RA1R5 D58ZOV211RA07 D73ZOV211RA18 D61ZOV211RA30 D62ZOV211RA45 D69ZOV211RA65 D63ZOV211RA100 D65ZOV211RA110 D6694ZOV211RA220
X X X X X X X X
X X X X X X X
X X X X X
X X X X X X X X X X X X X X X
X X X X X X
X X X X X X X
X X X X X X
X X X X X X X X
Maximum Ratings Transient
Continuous
X X X X X X
Minimum Marking
Applied Voltage
Energy
(mm) 3 5 7 8 10 12 14 18 20 25
Z181 Z181 - 02UL Z181 - 03UL Z181 - 03UL Z181 - 04UL Z181 - 07UL Z181 - 09UL Z181 - 100UL Z181 - 20UL Z181 - 200UL
(AC) 180 180 180 180 180 180 180 180 180 180
(DC) 230 230 230 230 230 230 230 230 230 230
10 x 1000 µ sec (J) 1.3 11 24 32 60 62 100 150 190 200
3 5 7 10 12 14 18 20 25
Z211 Z211 - 07UL Z211 - 18UL Z211 - 30UL Z211 - 45UL Z211 - 65UL Z211 - 75UL Z211 - 110UL Z211 - 220UL
210 210 210 210 210 210 210 210 210
270 270 270 270 270 270 270 270 270
1.5 13 28 58 66 120 185 230 250
8 x 20 µ sec (J) 1.3 11 24 32 60 62 100 150 190 200 1.5 13 28 58 66 120 185 230 250
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 2400 1700 3500 2500 4500 3200 6000 5000 7500 6000 10000 7000 13000 9000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) (V) (V) (A) (pF) 255 311 510 2 26 255 311 510 5 87 255 311 445 10 182 255 311 445 15 230 255 311 465 25 319 255 311 465 40 609 255 311 465 50 648 255 311 465 100 1145 255 311 465 100 1458 255 311 465 100 2648
100 800 1750 3500 4500 6000 7500 10000 13000
297 297 297 297 297 297 297 297 297
50 600 1250 2500 3200 4500 6000 6500 9000
363 363 363 363 363 363 363 363 363
570 545 545 545 545 545 545 545 545
2 5 10 25 40 50 75 100 100
22 74 154 271 516 550 971 1237 2247
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient ratings specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D68 D61 D62 D69 D63 D65 D66
H
D
Z
d
0.322 [8.18] 0.423 [10.74] 0.479 [12.17] 0.519 [13.18] 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.912 [23.16] 1.030 [26.16] 1.250 [31.75]
0.197 [5.00] 0.298 [7.57] 0.354 [8.99] 0.394 [10.00] 0.472 [11.99] 0.590 [14.99] 0.650 [16.51] 0.787 [19.99] 0.905 [22.99] 1.100 [27.94]
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.500 [12.7]
0.020 0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [1.02]
OFFSET AND 180 VAC Y T 0.069 0.223 [1.75] [5.66] 0.074 0.223 [1.88] [5.66] 0.074 0.223 [1.88] [5.66] 0.074 0.223 [1.88] [5.66] 0.081 0.223 [2.06] [5.66] 0.081 0.223 [2.06] [5.66] 0.081 0.223 [2.06] [5.66] 0.081 0.223 [2.06] [5.66] 0.081 0.223 [2.06] [5.66] 0.089 0.217 [2.26] [5.51]
THICKNESS 210 VAC Y T 0.080 0.220 [2.03] [5.59] 0.085 0.220 [2.16] [5.59] 0.085 0.236 [2.16] [5.99] N/A
N/A
0.092 [2.34] 0.092 [2.34] 0.091 [2.31] 0.091 [2.31] 0.091 [2.31] 0.099 [2.51]
0.237 [6.02] 0.234 [5.94] 0.239 [6.07] 0.234 [5.94] 0.234 [5.94] 0.234 [5.94]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
9
STANDARD SERIES SPECIFICATIONS 230 and 250 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous
A B C D E F D56ZOV231RA1R7 D58ZOV231RA08 D73ZOV231RA20 D68ZOV231RA20 D61ZOV231RA35 D62ZOV231RA50 D69ZOV231RA70 D63ZOV231RA80 D65ZOV231RA115 D6694ZOV231RA230
X X X X X X X X X X X X X X X X
X X X X X X X X
D56ZOV251RA1R9 D58ZOV251RA08 D73ZOV251RA21 D68ZOV251RA21 D61ZOV251RA40 D62ZOV251RA55 D69ZOV251RA72 D63ZOV251RA90 D65ZOV251RA130 D6694ZOV251RA260
X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X X X X X X X
X X X X X X
X X X X X
Nominal Size
Minimum Marking
(mm) 3 5 7 8 10 12 14 18 20 25
Z231 Z231-08UL Z231-20UL Z231 - 20UL Z231-35UL Z231-50UL Z231-70UL Z231-80UL Z231-115UL Z231-230UL
(AC) 230 230 230 230 230 230 230 230 230 230
(DC) 300 300 300 300 300 300 300 300 300 300
3 5 7 8 10 12 14 18 20 25
Z251 Z251-08UL Z251-21UL Z251 - 21UL Z251-40UL Z251-55UL Z251-72UL Z251-90UL Z251-130UL Z251-260UL
250 250 250 250 250 250 250 250 250 250
330 330 330 330 330 330 330 330 330 330
Applied Voltage
Maximum Ratings Transient
Energy 10 x 1000 8 x 20 µ sec µ sec (J) (J) 1.7 1.7 16 16 32 32 42 42 65 65 70 70 135 135 215 215 270 270 280 280 1.9 17 35 45 70 80 145 240 300 315
1.9 17 35 45 70 80 145 240 300 315
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 2400 1700 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000 100 800 1750 2400 3500 4500 6000 7500 10000 13000
50 600 1250 1700 2500 3200 4500 6000 6500 9000
Electrical Characteristics Max Varistor Clamping Typical Cap. Voltage Voltage @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) 397 (V) (A) (pF) 326 397 670 2 20 326 397 595 5 68 326 397 595 10 141 326 397 595 15 179 326 397 595 25 248 326 397 595 40 473 326 397 595 50 504 326 397 595 100 890 326 397 595 100 1134 326 397 595 100 2059 354 354 354 354 354 354 354 354 354 354
432 432 432 432 432 432 432 432 432 432
700 675 650 650 650 650 650 650 650 650
2 5 10 15 25 40 50 75 100 100
NOTES: NOTES: A = UL1449 FileAE86730 Transient Voltage Surge and Suppression VDE/CECC 42000/42201 & IEC 1051 Appendix lists the- single-pulse peak current energy ratings D on=file with the Safety Agencies. B = UL1414 File transient E38785 -rating Across - The Line Applications E differ = UL497B - File shown E180012 Maximum specified in this table are valid. They may from those in Appendix A. C = CSA File LR33458 70250.01 42000/42201 & IEC 1051 A = C22.2 UL1449 File E86730 - Transient Voltage Surge Suppression F = SEV - 96.7 D = VDE/CECC B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D68 D61 D62 D69 D63 D65 D66
H
D
Z
d
0.322 [8.18] 0.423 [10.7] 0.479 [12.17] 0.519 [13.18] 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
0.197 [5.0] 0.298 [7.57] 0.354 [8.99] 0.394 [10.00] 0.472 [11.99] 0.590 [14.99] 0.650 [16.51] 0.812 [20.62] 0.905 [22.99] 1.100 [27.94]
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.500 [12.7]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [1.02]
OFFSET AND 230 VAC Y T 0.085 0.229 [2.16] [5.82] 0.090 0.229 [2.29] [5.82] 0.090 0.242 [2.29] [6.15] 0.090 0.242 [2.29] [6.15] 0.097 0.242 [2.46] [6.15] 0.097 0.242 [2.46] [6.15] 0.097 0.242 [2.46] [6.15] 0.097 0.242 [2.46] [6.15] 0.097 0.242 [2.46] [6.15] 0.105 0.230 [2.67] [5.84]
THICKNESS 250 VAC Y T 0.091 0.236 [2.31] [5.99] 0.096 0.236 [2.44] [5.99] 0.096 0.249 [1.52] [6.32] 0.096 0.249 [1.52] [6.32] 0.103 0.249 [2.62] [6.32] 0.103 0.249 [2.62] [6.32] 0.103 0.249 [2.62] [6.32] 0.103 0.249 [2.62] [6.32] 0.103 0.249 [2.62] [6.32] 0.111 0.237 [2.82] [6.02]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
10
18 62 131 165 229 437 465 822 1047 1901
STANDARD SERIES SPECIFICATIONS
270 and 300 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
A B C D E F D56ZOV271RA2R0 D58ZOV271RA09 D73ZOV271RA23 D68ZOV271RA23 D61ZOV271RA43 D62ZOV271RA60 D69ZOV271RA75 D63ZOV271RA100 D65ZOV271RA140 D6694ZOV271RA280
X X X X X X X X X X X X X X X X
X X X X X X X X
D56ZOV301RA2R2 D58ZOV301RA10 D73ZOV301RA25 D68ZOV301RA25 D61ZOV301RA45 D62ZOV301RA65 D69ZOV301RA80 D63ZOV301RA105 D65ZOV301RA150 D6694ZOV301RA300
X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X X X X X X X
X X X X X X
X X X X X
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
(mm) 3 5 7 8 10 12 14 18 20 25
Z271 Z271 -09UL Z271 - 23UL Z271 - 23UL Z271 - 43UL Z271 - 60UL Z271 - 75UL Z271 - 100UL Z271 - 140UL Z271 - 280UL
(AC) 270 270 270 270 270 270 270 270 270 270
(DC) 360 360 360 360 360 360 360 360 360 360
10 x 1000 µ sec (J) 2 20 40 52 80 91 160 260 325 340
3 5 7 8 10 12 14 18 20 25
Z301 Z301 -10UL Z301 - 25UL Z301 - 25UL Z301 - 45UL Z301 - 65UL Z301 - 80UL Z301 - 105UL Z301 - 150UL Z301 - 300UL
300 300 300 300 300 300 300 300 300 300
390 390 390 390 390 390 390 390 390 390
2.2 21 42 55 85 105 175 280 350 360
8 x 20 µ sec (J) 2 20 40 52 80 91 160 260 325 340 2.2 21 42 55 85 105 175 280 350 360
Electrical Characteristics
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 2400 1700 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000 100 800 1750 2400 3500 4500 6000 7500 10000 13000
50 600 1250 1700 2500 3200 4500 6000 6500 9000
Varistor Voltage 1 mA DC Vmin (V) 382 382 382 382 382 382 382 382 382 382
Vmax (V) 466 466 466 466 466 466 466 466 466 466
425 425 425 425 425 425 425 425 425 425
518 518 518 518 518 518 518 518 518 518
Max Clamping Voltage (@Test Current) (8 x 20 µ sec) (V) (A) 740 2 740 5 710 10 710 15 710 25 710 40 710 50 710 75 710 100 710 100 860 810 790 790 790 790 790 790 790 790
2 5 10 15 25 40 50 75 100 100
Typical Cap. 1 V rms @1kHz (pF) 17 58 121 153 213 406 432 763 972 1765 15 52 108 137 190 363 386 682 869 1577
NOTES: NOTES: A = UL1449 File E86730 - Transient Voltage Surgeand Suppression D =the VDE/CECC 42000/42201 & IEC 1051 Appendix A lists the single-pulse peak current energy ratings on file with Safety Agencies. B = UL1414 Filetransient E38785rating - Across - The in Line E = those UL497B - FileinE180012 Maximum specified thisApplications table are valid. They may differ from shown Appendix A. C = CSA C22.2 File F =DSEV - 96.7 70250.01 A = UL1449 FileLR33458 E86730 - Transient Voltage Surge Suppression = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D68 D61 D62 D69 D63 D65 D66
H 0.322 [8.18] 0.423 [10.7] 0.479 [12.17] 0.519 [13.18] 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.197 0.160 [5.0] [4.06] 0.298 0.200 [7.57] [5.08] 0.354 0.200 [8.99] [5.08] 0.394 0.200 [10.00] [5.08] 0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 270 VAC Y T 0.098 0.245 [2.49] [6.22] 0.103 0.245 [2.62] [6.22] 0.103 0.257 [2.62] [6.53] 0.103 0.257 [2.62] [6.53] 0.110 0.257 [2.79] [6.53] 0.110 0.257 [2.79] [6.53] 0.110 0.257 [2.79] [6.53] 0.110 0.257 [2.79] [6.53] 0.110 0.257 [2.79] [6.53] 0.118 0.244 [3.00] [6.20]
THICKNESS 300 VAC Y T 0.105 0.255 [2.67] [6.48] 0.110 0.255 [2.79] [6.48] 0.110 0.268 [2.79] [6.81] 0.110 0.268 [2.79] [6.81] 0.117 0.268 [2.97] [6.81] 0.117 0.268 [2.97] [6.81] 0.117 0.268 [2.97] [6.81] 0.117 0.268 [2.97] [6.81] 0.149 0.268 [3.78] [6.81] 0.125 0.255 [3.18] [6.48]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
11
STANDARD SERIES SPECIFICATIONS
320 and 360 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
A B C D E F D56ZOV321RA2R4 D58ZOV321RA11 D73ZOV321RA27 D61ZOV321RA45 D62ZOV321RA70 D69ZOV321RA90 D63ZOV321RA110 D65ZOV321RA160 D6694ZOV321RA320
X X X X X X X X
D56ZOV361RA2R7 D58ZOV361RA12 D73ZOV361RA28 D61ZOV361RA45 D62ZOV361RA70 D69ZOV361RA85 D63ZOV361RA110 D65ZOV361RA160 D6694ZOV361RA320
X X X X X X X X
X X X X X X X
X X X X
X X X X X X X
X X X X X X X X X
X X X X X X X X
X X X X X
X X X X X
X X X X X X X X
X X X X X
X X X X X
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
(mm) 3 5 7 10 12 14 18 20 25
Z321 Z321 - 11UL Z321 - 27UL Z321 - 45UL Z321 - 70UL Z321 - 90UL Z321 - 110UL Z321 - 160UL Z321 - 320UL
(AC) 320 320 320 320 320 320 320 320 320
(DC) 420 420 420 420 420 420 420 420 420
10 x 1000 µ sec (J) 2.4 21 46 92 140 190 310 385 430
3 5 7 10 12 14 18 20 25
Z361 Z361 - 12UL Z361 - 28UL Z361 - 45UL Z361 - 70UL Z361 - 85UL Z361 - 110UL Z361 - 160UL Z361 - 320UL
360 360 360 360 360 360 360 360 360
470 470 470 470 470 470 470 470 470
2.7 22 47 97 145 205 320 410 440
8 x 20 µ sec (J) 2.4 21 46 92 140 190 310 385 430 2.7 22 47 97 145 205 320 410 440
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000
Electrical Characteristics Max Varistor Clamping Typical Cap. Voltage Voltage @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) (V) (V) (A) (pF) 453 553 860 2 14 453 553 850 5 49 453 553 850 10 102 453 553 850 25 179 453 553 850 40 341 453 553 850 50 363 453 553 850 75 641 453 553 850 100 816 453 553 850 100 1483
100 800 1750 3500 4500 6000 7500 10000 13000
522 522 522 522 522 522 522 522 522
50 600 1250 2500 3200 4500 6000 6500 9000
638 638 638 638 638 638 638 638 638
1020 960 960 960 960 960 960 960 960
2 5 10 25 40 50 75 100 100
NOTES: NOTES: A = UL1449 FileAE86730 Transient Voltage Surge and Suppression D =the VDE/CECC 42000/42201 & IEC 1051 Appendix lists the-single-pulse peak current energy ratings on file with Safety Agencies. B = UL1414 File transient E38785 -rating Across - The Line Applications E = those UL497B - FileinE180012 Maximum specified in this table are valid. They may differ from shown Appendix A. C = CSA File LR33468 F =D SEV - 96.7 70250.01 A = C22.2 UL1449 File E86730 - Transient Voltage Surge Suppression = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions: Inches [mm] Size code D56 D58 D73 D61 D62 D69 D63 D65 D66
H 0.322 [8.18] 0.423 [10.7] 0.479 [12.17] 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.197 0.160 [5.0] [4.06] 0.298 0.200 [7.57] [5.08] 0.354 0.200 [8.99] [5.08] 0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 320 VAC Y T 0.114 0.264 [2.90] [6.71] 0.119 0.264 [3.02] [6.71] 0.114 0.272 [2.90] [6.91] 0.153 0.276 [3.89] [7.01] 0.153 0.276 [3.89] [7.01] 0.153 0.276 [3.89] [7.01] 0.153 0.276 [3.89] [7.01] 0.153 0.276 [3.89] [7.01] 0.161 0.267 [4.09] [6.78]
THICKNESS 360 VAC Y T 0.122 0.272 [3.10] [6.91] 0.127 0.272 [3.22] [6.91] 0.127 0.285 [3.22] [7.24] 0.161 0.281 [4.09] [7.14] 0.163 0.286 [4.14] [7.14] 0.202 0.281 [5.13] [7.14] 0.153 0.276 [3.89] [7.01] 0.159 0.281 [4.04] [7.14] 0.169 0.275 [4.29] [6.99]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
12
12 42 88 154 294 313 553 704 1278
STANDARD SERIES SPECIFICATIONS
390 and 420 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
A B C D E F D56ZOV391RA2R9 D58ZOV391RA13 D73ZOV391RA29 D61ZOV391RA45 D62ZOV391RA70 D69ZOV391RA85 D63ZOV391RA110 D65ZOV391RA150 D6694ZOV391RA320
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
D56ZOV421RA3R2 D58ZOV421RA14 D73ZOV421RA30 D61ZOV421RA45 D62ZOV421RA70 D69ZOV421RA90 D63ZOV421RA110 D65ZOV421RA160 D6694ZOV421RA320
X X X X X X X X
X X X X X X X
X X X X X X X
X X X X X
X X X X X X X X
X X X X X
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
(mm) 3 5 7 10 12 14 18 20 25
Z391 Z391 - 13UL Z391-29UL Z391-45UL Z391-70UL Z391-85UL Z391-110UL Z391-150UL Z391-320UL
(AC) 390 390 390 390 390 390 390 390 390
(DC) 500 500 500 505 500 505 500 505 505
10 x 1000 µ sec (J) 2.9 25 51 107 150 215 330 420 460
3 5 7 10 12 14 18 20 25
Z421 Z421 - 14UL Z421-30UL Z421-45UL Z421-70UL Z421-90UL Z421-110UL Z421-160UL Z421-320UL
420 420 420 420 420 420 420 420 420
560 560 560 560 560 560 560 560 560
3.2 26 57 110 156 225 340 430 480
8 x 20 µ sec (J) 2.9 25 51 107 150 215 330 420 460 3.2 26 57 110 156 225 340 430 480
Electrical Characteristics
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000 100 800 1750 3500 4500 6000 7500 10000 13000
50 600 1250 2500 3200 4500 6000 6500 9000
Varistor Voltage @1 mA DC Vmin (V) 552 552 552 552 552 552 552 552 552
Vmax (V) 674 674 674 674 674 674 674 674 674
594 594 594 594 594 594 594 594 594
725 725 725 725 725 725 725 725 725
Max Clamping Voltage (@Test Current) (8 x 20µ sec) (V) (A) 1090 2 1040 5 1040 10 1025 25 1025 40 1025 50 1025 75 1025 100 1025 100 1140 1130 1120 1120 1120 1120 1120 1120 1120
2 5 10 25 40 50 75 100 100
Typical Cap. 1 V rms @1kHz (pF) 12 40 83 146 278 297 524 667 1211 11 37 77 136 258 275 486 618 1123
NOTES: NOTES: A = UL1449 FileAE86730 Transient Voltage Surge Suppression D = VDE/CECC Appendix lists the- single-pulse peak current and energy ratings on file with the Safety Agencies. 42000/42201 & IEC 1051 B = UL1414 File transient E38785 -rating Across - The Line Applications = UL497B - File E180012 Maximum specified in this table are valid. They may differ from thoseE shown in Appendix A. C = CSA FileFile LR33458 F = SEV - 42000/42201 96.7 70250.01 A =C22.2 UL1449 E86730 - Transient Voltage Surge Suppression D = VDE/CECC & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D61 D62 D69 D63 D65 D66
H 0.322 [8.18] 0.423 [10.7] 0.479 [12.17] 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.197 0.160 [5.0] [4.06] 0.298 0.200 [7.57] [5.08] 0.354 0.200 [8.99] [5.08] 0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 390 VAC Y T 0.125 0.275 [3.18] [6.99] 0.130 0.275 [3.30] [6.99] 0.130 0.290 [3.30] [7.37] 0.167 0.291 [4.24] [7.39] 0.167 0.290 [4.24] [7.37] 0.167 0.291 [4.24] [7.37] 0.153 0.276 [3.89] [7.01] 0.167 0.291 [4.24] [7.37] 0.175 0.291 [4.45] [7.37]
THICKNESS 420 VAC Y T 0.133 0.313 [3.38] [7.95] 0.138 0.313 [3.50] [7.95] 0.138 0.296 [3.50] [7.52] 0.177 0.313 [4.50] [7.95] 0.177 0.313 [4.50] [7.95] 0.177 0.313 [4.50] [7.95] 0.177 0.313 [4.50] [7.95] 0.177 0.313 [4.50] [7.95] 0.185 0.282 [4.70] [7.16]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
13
STANDARD SERIES SPECIFICATIONS
460 and 480 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
A B C D E F D58ZOV461RA17 D61ZOV461RA50 D62ZOV461RA75 D69ZOV461RA100 D63ZOV461RA120 D65ZOV461RA175 D6694ZOV461RA340
X X X X X X
X X X X X X
X X X X X X
X X X X X
X X X X X X
X X X X X
D56ZOV481RA3R6 D61ZOV481RA50 D62ZOV481RA80 D69ZOV481RA105 D63ZOV481RA130 D65ZOV481RA180 D6694ZOV481RA360
X X X X X X
X X X X X X
X X X X X X
X X X X X
X X X X X X
X X X X X
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
(mm) 5 10 12 14 18 20 25
Z461 - 17 Z461-50UL Z461-75UL Z461-100UL Z461-120UL Z461-175UL Z461-340UL
(AC) 460 460 460 460 460 460 460
(DC) 615 615 615 615 615 615 615
10 x 1000 µ sec (J) 25 115 162 230 360 450 500
3 10 12 14 18 20 25
Z481 Z481-50UL Z481-80UL Z481-105UL Z481-130UL Z481-180UL Z481-360UL
480 480 480 480 480 480 480
640 640 640 640 640 640 640
3.6 120 167 235 365 460 510
8 x 20 µ sec (J) 25 115 162 230 360 450 500 3.6 120 167 235 365 460 510
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 800 600 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000 100 3500 4500 6000 7500 10000 13000
50 2500 3200 4500 6000 6500 9000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) (V) (V) (A) (pF) 651 795 1240 5 34 651 795 1240 25 124 651 795 1240 40 236 651 795 1240 50 251 651 795 1240 75 443 651 795 1240 100 565 651 795 1240 100 1025 679 679 679 679 679 679 679
829 829 829 829 829 829 829
1370 1300 1300 1300 1300 1300 1300
2 25 40 50 75 100 100
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D61 D62 D69 D63 D65 D66
H 0.322 [8.18] 0.423 [10.7] 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.197 0.160 [5.0] [4.06] 0.298 0.200 [7.57] [5.08] 0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.020 [0.51] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [1.02]
OFFSET AND THICKNESS 460 480 VAC VAC Y T Y T 0.150 0.329 N/A N/A [3.81] [8.36] 0.150 0.313 N/A N/A [3.81] [7.95] 0.189 0.322 0.194 0.329 [4.80] [8.18] [4.93] [8.36] 0.188 0.324 0.194 0.336 [4.78] [8.23] [4.93] [8.53] 0.189 0.322 0.194 0.336 [4.80] [8.18] [4.93] [8.53] 0.188 0.324 0.194 0.336 [4.78] [8.23] [4.93] [8.53] 0.189 0.322 0.194 0.336 [4.80] [8.18] [4.93] [8.53] 0.197 0.322 0.202 0.300 [5.00] [8.18] [5.13] [7.62]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
14
10 119 227 242 427 544 989
STANDARD SERIES SPECIFICATIONS
510 and 550 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
D61ZOV511RA55 D62ZOV511RA85 D69ZOV511RA110 D63ZOV511RA140 D65ZOV511RA190 D6694ZOV511RA380
A X X X X X X
B X X X X X X
C X X X X X X
D X X X X X
E X X X X X X
F X X X X X
(mm) 10 12 14 18 20 25
D61ZOV551RA60 D62ZOV551RA90 D69ZOV551RA115 D63ZOV551RA145 D65ZOV551RA200 D6694ZOV551RA400
X X X X X X
X X X X X X
X X X X X X
X X X X X
X X X X X X
X X X X X
10 12 14 18 20 25
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
Z511-55UL Z511-85UL Z511-110UL Z511-140UL Z511-190UL Z511-380UL
(AC) 510 510 510 510 510 510
(DC) 675 675 675 675 675 675
10 x 1000 µ sec (J) 125 172 240 375 470 525
Z551-60UL Z551-90UL Z551-115UL Z551-145UL Z551-200UL Z551-400UL
550 550 550 550 550 550
700 700 700 700 700 700
130 192 255 405 510 540
8 x 20 µ sec (J) 125 172 240 375 470 525 130 192 255 405 510 540
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000 3500 4500 6000 7500 10000 13000
2500 3200 4500 6000 6500 9000
Electrical Characteristics Max Clamping Typical Cap. Voltage (@Test Current) 1 V rms Vmax (8 x 20µs) @1kHz (V) (V) (A) (pF) 881 1350 25 112 881 1350 40 213 881 1350 50 227 881 1350 75 401 881 1350 100 510 881 1350 100 927
Varistor Voltage @1 mA DC Vmin (V) 722 722 722 722 722 722 778 778 778 778 778 778
950 950 950 950 950 950
1400 1400 1400 1400 1400 1400
25 40 50 75 100 100
104 198 211 373 475 862
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D61 D62 D69 D63 D65 D66
H 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 510 VAC Y T 0.201 0.347 [5.11] [8.81] 0.201 0.347 [5.11] [8.81] 0.201 0.347 [5.11] [8.81] 0.201 0.347 [5.11] [8.81] 0.201 0.347 [5.11] [8.81] 0.209 0.310 [5.31] [7.87]
THICKNESS 550 VAC Y T 0.216 0.362 [5.49] [9.19] 0.216 0.362 [5.49] [9.19] 0.216 0.362 [5.49] [9.19] 0.216 0.362 [5.49] [9.19] 0.216 0.362 [5.49] [9.19] 0.224 0.323 [5.69] [8.20]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
15
STANDARD SERIES SPECIFICATIONS
580 and 620 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
D61ZOV581RA65 D62ZOV581RA95 D69ZOV581RA120 D63ZOV581RA160 D65ZOV581RA220 D6694ZOV581RA440
A X X X X X X
B X X X X X
C X X X X X X
D E F X X X X X X X X X X
D61ZOV621RA65 D62ZOV621RA100 D69ZOV621RA130 D63ZOV621RA170 D65ZOV621RA230 D6694ZOV621RA460
X X X X X X
X X X X X X
X X X X X X
X X X X X
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
(mm) 10 12 14 18 20 25
Z581 - 65UL Z581 - 95UL Z581 - 120UL Z581 - 160UL Z581 - 220UL Z581 - 440UL
(AC) 580 580 580 580 580 580
(DC) 735 735 735 735 735 735
10 x 1000 µ sec (J) 140 202 265 425 530 560
10 12 14 18 20 25
Z621 - 65UL Z621 - 100UL Z621 - 130UL Z621 - 170UL Z621 - 230UL Z621 - 460UL
620 620 620 620 620 620
800 800 800 800 800 800
145 215 290 450 565 600
X X X X X
8 x 20 µ sec (J) 140 202 265 425 530 560 145 215 290 450 565 600
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000 3500 4500 6000 7500 10000 13000
2500 3200 4500 6000 6500 9000
Electrical Characteristics Max Varistor Clamping Typical Cap. Voltage Voltage @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20µ sec) (V) (V) (V) (A) (pF) 821 1002 1500 25 98 821 1002 1500 40 187 821 1002 1500 50 199 821 1002 1500 75 352 821 1002 1500 100 449 821 1002 1500 100 815 877 877 877 877 877 877
1071 1071 1071 1071 1071 1071
1650 1650 1650 1650 1650 1650
25 40 50 75 100 100
NOTES: NOTES: A = UL1449 FileA E86730 Transient Voltage Surge and Suppression D = Agencies. VDE/CECC 42000/42201 & IEC 1051 Appendix lists the -single-pulse peak current energy ratings on file with the Safety B = UL1414 Filetransient E38785 rating - Across - The Line Applications = UL497B - File E180012 Maximum specified in this table are valid. They may differ from thoseEshown in Appendix A. C = CSA File LR33458 F = SEV -42000/42201 96.7 70250.01 A = C22.2 UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D61 D62 D69 D63 D65 D66
H 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [1.02]
OFFSET AND 580 VAC Y T 0.224 0.373 [5.69] [9.47] 0.224 0.373 [5.69] [9.47] 0.224 0.373 [5.69] [9.47] 0.224 0.373 [5.69] [9.47] 0.224 0.373 [5.69] [9.47] 0.232 0.332 [5.89] [8.43]
THICKNESS 620 VAC Y T 0.302 0.381 [7.67] [9.68] 0.231 0.385 [5.87] [9.78] 0.231 0.388 [5.87] [9.86] 0.231 0.388 [5.87] [9.86] 0.231 0.388 [5.87] [9.86] 0.239 0.345 [6.07] [8.76]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
16
92 175 186 329 419 761
STANDARD SERIES SPECIFICATIONS
680 and 750 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
D61ZOV681RA70 D62ZOV681RA105 D69ZOV681RA150 D63ZOV681RA200 D65ZOV681RA260 D6694ZOV681RA520
A X X X X X X
B X X X
C X X X X X X X
D69ZOV751RA165 D63ZOV751RA220 D65ZOV751RA290 D6694ZOV751RA560
X X X X X
Continuous Nominal Size
D E F X X X X X X X X X X
X X X X X X X
X X X
(mm) 10 12 14 18 20 25 14 18 20 25
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
Z681 - 70UL Z681 - 105UL Z681 - 150UL Z681 - 200UL Z681 - 260UL Z681 - 520UL
(AC) 680 680 680 680 680 680
(DC) 860 860 860 860 860 860
10 x 1000 µ sec (J) 155 232 310 500 620 655
Z751 Z751 Z751 Z751
750 750 750 750
900 900 900 900
350 540 670 700
-
165UL 220UL 290UL 560UL
8 x 20 µ sec (J) 155 232 310 500 620 655 350 540 670 700
Electrical Characteristics
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000
Vmin (V) 962 962 962 962 962 962
Vmax (V) 1175 1175 1175 1175 1175 1175
(8 x 20 µ sec) (V) (A) 1800 25 1800 40 1800 50 1800 75 1800 100 1800 100
6000 7500 10000 13000
1062 1062 1062 1062
1300 1300 1300 1300
2100 2100 2100 2100
4500 6000 6500 9000
Varistor Voltage @1 mA DC
Max Clamping Voltage (@Test Current)
50 75 100 100
Typical Cap. 1 V rms @1kHz (pF) 84 160 170 300 382 694 151 267 340 618
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient ratings specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D61 D62 D69 D63 D65 D66
H 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 680 VAC Y T 0.247 0.405 [6.27] [10.29] 0.247 0.411 [6.27] [10.44] 0.247 0.411 [6.27] [10.44] 0.247 0.411 [6.27] [10.44] 0.247 0.411 [6.27] [10.44] 0.255 0.369 [6.48] [9.37]
THICKNESS 750 VAC Y T N/A
N/A
N/A
N/A
0.247 [6.27] 0.266 [6.76] 0.247 [5.46] 0.312 [7.92]
0.411 [10.44] 0.437 [11.10] 0.411 [10.44] 0.325 [8.26]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
17
STANDARD SERIES SPECIFICATIONS
1000 VAC Varistors 1000 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
D69ZOV102RA220 D63ZOV102RA280 D65ZOV102RA360 D6694ZOV102RA720
A X X X X
B X X X X
C X X X X
D E F X X X X X X
Continuous Nominal Size
(mm) 14 18 20 25
Minimum Marking
Applied Voltage
Z102-220UL Z102-280UL Z102-360UL Z102-720UL
(AC) 1000 1000 1000 1000
(DC) 1200 1200 1200 1200
Maximum Ratings Tranisent Energy 10 x 1000 µ sec (J) 510 690 860 875
8 x 20 µ sec (J) 510 690 860 875
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 6000 4500 7500 6000 10000 6500 13000 9000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20µ sec) (V) (V) (V) (A) (pF) 1414 1728 2700 50 115 1414 1728 2700 75 204 1414 1728 2700 100 259 1414 1728 2700 100 471
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] OFFSET AND THICKNESS
Size code D69 D63 D65 D66
H 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
1000 VAC
d 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [1.02]
Y 0.364 [9.25] 0.364 [9.25] 0.364 [9.25] 0.372 [9.45]
T 0.531 [13.49] 0.531 [13.49] 0.531 [13.49] 0.435 [11.05]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
18
STANDARD SERIES LEAD CODES
19
STANDARD SERIES LEAD CODES
20
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
DISK d *LEAD **Y +/"X" +/- 0.040" Resultant THICK LEAD OFFSET 0.030" for Nominal "Z" Lead NOM. DIA. (each lead) 0.160 0.197 0.296 20 0.033 0.025 0.058 0.149 0.188 0.290 25 0.039 0.025 0.064 0.147 0.186 0.289 30 0.043 0.025 0.068 0.145 0.185 0.288 35 0.056 0.025 0.081 0.138 0.180 0.285 40 0.028 0.025 0.053 0.151 0.190 0.291 50 0.020 0.025 0.045 0.154 0.192 0.293 60 0.024 0.025 0.049 0.152 0.191 0.292 75 0.028 0.025 0.053 0.151 0.190 0.291 95 0.031 0.025 0.056 0.150 0.189 0.291 120 0.031 0.025 0.056 0.150 0.189 0.291 130 0.031 0.025 0.056 0.150 0.189 0.291 140 0.033 0.025 0.058 0.149 0.188 0.290 150 0.036 0.025 0.061 0.148 0.187 0.290 180 0.042 0.025 0.067 0.145 0.185 0.288 210 0.050 0.025 0.075 0.141 0.182 0.286 230 0.054 0.025 0.079 0.139 0.180 0.285 250 0.059 0.025 0.084 0.136 0.178 0.284 270 0.063 0.025 0.088 0.134 0.176 0.283 300 0.071 0.025 0.096 0.128 0.172 0.280 320 0.075 0.025 0.016 0.100 0.125 0.170 0.279 360 0.087 0.025 0.016 0.112 0.114 0.162 0.274 390 0.092 0.025 0.016 0.117 0.109 0.158 0.272 420 0.099 0.025 0.016 0.124 0.101 0.153 0.269 460 0.109 0.025 0.016 0.134 0.087 0.144 0.264 480 0.113 0.025 0.016 0.138 0.081 0.141 0.262 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, and lead offset. *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
Dimension Spacing 0.394 0.492 0.390 0.489 0.389 0.454 0.388 0.455 0.386 0.457 0.390 0.453 0.391 0.452 0.391 0.452 0.390 0.453 0.390 0.453 0.390 0.453 0.390 0.453 0.390 0.453 0.389 0.454 0.388 0.454 0.387 0.456 0.386 0.456 0.385 0.457 0.384 0.458 0.382 0.460 0.381 0.461 0.378 0.463 0.376 0.464 0.374 0.466 0.371 0.469 0.369 0.470 No Code 7 H MAX. H MAX. 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322
10 H MAX. 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322
3mm Zinc Oxide Varistor Dimensions 94 H MAX.
D3 H MAX.
D7 H MAX.
***T MAX. 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.272 0.275 0.313 0.313 0.329
D MAX. 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197
STANDARD SERIES MECHANICAL DIMENSIONS
21
22
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.290 0.289 0.288 0.286 0.291 0.293 0.292 0.291 0.291 0.291 0.291 0.290 0.290 0.288 0.286 0.285 0.284 0.283 0.280 0.265 0.259 0.256 0.252 0.242
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.188 0.186 0.185 0.182 0.189 0.192 0.191 0.189 0.189 0.189 0.189 0.188 0.187 0.185 0.182 0.180 0.178 0.176 0.172 0.146 0.134 0.129 0.120 0.100
0.390 0.389 0.388 0.387 0.390 0.391 0.391 0.390 0.390 0.390 0.390 0.390 0.389 0.388 0.387 0.386 0.385 0.384 0.382 0.371 0.367 0.365 0.362 0.355
0.489 0.488 0.487 0.486 0.489 0.490 0.489 0.489 0.489 0.489 0.489 0.489 0.488 0.487 0.486 0.486 0.485 0.484 0.483 0.474 0.470 0.469 0.467 0.462
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.197 0.296 0.394 0.492
0.160
20 0.033 0.025 0.058 0.149 25 0.039 0.025 0.064 0.147 30 0.043 0.025 0.068 0.145 35 0.051 0.025 0.076 0.141 40 0.030 0.025 0.055 0.150 50 0.020 0.025 0.045 0.154 60 0.025 0.025 0.050 0.152 75 0.031 0.025 0.056 0.150 95 0.031 0.025 0.056 0.150 120 0.031 0.025 0.056 0.150 130 0.031 0.025 0.056 0.150 140 0.033 0.025 0.058 0.149 150 0.036 0.025 0.061 0.148 180 0.042 0.025 0.067 0.145 210 0.050 0.025 0.075 0.141 230 0.054 0.025 0.079 0.139 250 0.059 0.025 0.084 0.136 270 0.063 0.025 0.088 0.134 300 0.071 0.025 0.096 0.128 320 0.075 0.025 0.016 0.132 360 0.087 0.025 0.016 0.144 390 0.092 0.025 0.016 0.149 420 0.099 0.025 0.016 0.156 480 0.113 0.025 0.016 0.170 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423
0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423
No Code 7 H MAX. H MAX. 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498
10 H MAX. 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498
0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498
0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423
0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
5mm Zinc Oxide Varistor Dimensions 94 H MAX.
D3 H MAX.
D7 H MAX.
0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298
D MAX.
0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.272 0.275 0.313 0.329
***T MAX.
STANDARD SERIES
MECHANICAL DIMENSIONS
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.288 0.285 0.281 0.290 0.289 0.288 0.286 0.291 0.293 0.292 0.291 0.291 0.291 0.291 0.290 0.290 0.288 0.286 0.285 0.284 0.283 0.280 0.265 0.263 0.261 0.259 0.257 0.256 0.252 0.252 0.245 0.242 0.237 0.230 0.224 0.219
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.184 0.180 0.174 0.188 0.186 0.185 0.182 0.189 0.192 0.191 0.189 0.189 0.189 0.189 0.188 0.187 0.185 0.182 0.180 0.178 0.176 0.172 0.146 0.143 0.139 0.134 0.132 0.129 0.122 0.120 0.106 0.100
0.388 0.386 0.383 0.390 0.389 0.388 0.387 0.390 0.391 0.391 0.390 0.390 0.390 0.390 0.390 0.389 0.388 0.387 0.386 0.385 0.384 0.382 0.371 0.370 0.368 0.367 0.366 0.365 0.362 0.362 0.357 0.355 0.352 0.347 0.343 0.340
0.487 0.485 0.483 0.489 0.488 0.487 0.486 0.489 0.490 0.489 0.489 0.489 0.489 0.489 0.489 0.488 0.487 0.486 0.486 0.485 0.484 0.483 0.474 0.473 0.472 0.470 0.470 0.469 0.467 0.467 0.463 0.462 0.459 0.455 0.452 0.450
0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479
0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479
No Code 7 H MAX. H MAX. 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554
10 H MAX. 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554
0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554
0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479
0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
7mm Zinc Oxide Varistor Dimensions "X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.197 0.296 0.394 0.492
0.160
11 0.045 0.025 0.070 0.144 14 0.055 0.025 0.080 0.139 17 0.068 0.025 0.093 0.130 20 0.033 0.025 0.058 0.149 25 0.039 0.025 0.064 0.147 30 0.043 0.025 0.068 0.145 35 0.051 0.025 0.076 0.141 40 0.030 0.025 0.055 0.150 50 0.020 0.025 0.045 0.154 60 0.025 0.025 0.050 0.152 75 0.031 0.025 0.056 0.150 95 0.031 0.025 0.056 0.150 120 0.031 0.025 0.056 0.150 130 0.031 0.025 0.056 0.150 140 0.033 0.025 0.058 0.149 150 0.036 0.025 0.061 0.148 180 0.042 0.025 0.067 0.145 210 0.050 0.025 0.075 0.141 230 0.054 0.025 0.079 0.139 250 0.059 0.025 0.084 0.136 270 0.063 0.025 0.088 0.134 300 0.071 0.025 0.096 0.128 320 0.075 0.025 0.016 0.132 330 0.078 0.025 0.016 0.135 350 0.083 0.025 0.016 0.140 360 0.087 0.025 0.016 0.144 370 0.089 0.025 0.016 0.146 390 0.092 0.025 0.016 0.149 400 0.098 0.025 0.016 0.155 420 0.099 0.025 0.016 0.156 460 0.109 0.025 0.016 0.166 480 0.113 0.025 0.016 0.170 510 0.120 0.025 0.016 0.177 550 0.129 0.025 0.016 0.186 580 0.137 0.025 0.016 0.194 600 0.142 0.025 0.016 0.199 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
7MM ZINC OXIDE VARISTOR DIMENSIONS 94 H MAX.
D3 H MAX.
D7 H MAX.
0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385
***T MAX.
STANDARD SERIES MECHANICAL DIMENSIONS
23
24
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.286 0.283 0.279 0.289 0.287 0.286 0.284 0.289 0.291 0.290 0.289 0.289 0.289 0.289 0.289 0.288 0.287 0.284 0.283 0.282 0.280 0.278 0.261 0.260 0.257 0.255 0.253 0.252 0.248 0.247 0.240 0.237 0.232 0.224 0.217 0.213 0.209 0.192
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.181 0.177 0.170 0.186 0.184 0.182 0.179 0.186 0.190 0.189 0.187 0.187 0.187 0.187 0.186 0.185 0.183 0.179 0.177 0.175 0.173 0.168 0.140 0.137 0.131 0.127 0.124 0.120 0.112 0.111
0.386 0.384 0.381 0.389 0.388 0.387 0.385 0.389 0.391 0.390 0.389 0.389 0.389 0.389 0.389 0.388 0.387 0.385 0.384 0.383 0.382 0.380 0.369 0.368 0.366 0.364 0.363 0.362 0.359 0.359 0.354 0.352 0.348 0.343 0.339 0.336 0.333 0.323
0.486 0.484 0.482 0.488 0.487 0.486 0.485 0.488 0.489 0.489 0.488 0.488 0.488 0.488 0.488 0.487 0.486 0.485 0.484 0.484 0.483 0.481 0.472 0.471 0.470 0.468 0.468 0.467 0.465 0.464 0.461 0.459 0.456 0.453 0.449 0.447 0.445 0.438
"X" +/- 0.040" Resultant Dimensions for Nominal "Z" Lead Spacing 0.197 0.296 0.394 0.492
0.160
11 0.045 0.032 0.077 0.140 14 0.055 0.032 0.087 0.134 17 0.068 0.032 0.100 0.125 20 0.033 0.032 0.065 0.146 25 0.039 0.032 0.071 0.143 30 0.043 0.032 0.075 0.141 35 0.051 0.032 0.083 0.137 40 0.032 0.032 0.064 0.147 50 0.020 0.032 0.052 0.151 60 0.025 0.032 0.057 0.150 75 0.031 0.032 0.063 0.147 95 0.031 0.032 0.063 0.147 120 0.031 0.032 0.063 0.147 130 0.031 0.032 0.063 0.147 140 0.033 0.032 0.065 0.146 150 0.036 0.032 0.068 0.145 180 0.042 0.032 0.074 0.142 210 0.050 0.032 0.082 0.137 230 0.054 0.032 0.086 0.135 250 0.059 0.032 0.091 0.132 270 0.063 0.032 0.095 0.129 300 0.071 0.032 0.103 0.122 320 0.075 0.032 0.016 0.139 330 0.078 0.032 0.016 0.142 350 0.083 0.032 0.016 0.147 360 0.087 0.032 0.016 0.151 370 0.089 0.032 0.016 0.153 390 0.092 0.032 0.016 0.156 400 0.098 0.032 0.016 0.162 420 0.099 0.032 0.016 0.163 460 0.109 0.032 0.016 0.173 480 0.113 0.032 0.016 0.177 510 0.120 0.032 0.016 0.184 550 0.129 0.032 0.016 0.193 580 0.137 0.032 0.016 0.201 600 0.142 0.032 0.016 0.206 620 0.146 0.032 0.016 0.210 680 0.161 0.032 0.016 0.225 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
No Code 7 H MAX. H MAX. 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672
10 H MAX. 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672
0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672
0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
10mm Zinc Oxide Varistor Dimensions 94 H MAX. 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
D3 H MAX.
D7 H MAX.
0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411
***T MAX.
STANDARD SERIES
MECHANICAL DIMENSIONS
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.286 0.283 0.279 0.289 0.287 0.285 0.283 0.289 0.291 0.290 0.289 0.289 0.289 0.289 0.288 0.287
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.181 0.177 0.170 0.186 0.184 0.180 0.176 0.186 0.189 0.188 0.186 0.187 0.187 0.186 0.185 0.183
0.386 0.384 0.381 0.389 0.388 0.386 0.384 0.389 0.390 0.390 0.389 0.389 0.389 0.389 0.388 0.387
0.486 0.484 0.482 0.488 0.487 0.486 0.484 0.488 0.489 0.488 0.488 0.488 0.488 0.488 0.487 0.487
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
No Code 7 H MAX. H MAX. 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731
10 H MAX. 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
11mm Zinc Oxide Varistor Dimensions "X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.160 0.197 0.296 0.394 0.492
11 0.045 0.032 0.077 0.140 14 0.055 0.032 0.087 0.134 17 0.068 0.032 0.100 0.125 20 0.033 0.032 0.065 0.146 25 0.039 0.032 0.071 0.143 30 0.047 0.032 0.079 0.139 35 0.056 0.032 0.088 0.134 40 0.032 0.032 0.064 0.147 50 0.022 0.032 0.054 0.151 60 0.027 0.032 0.059 0.149 75 0.032 0.032 0.064 0.147 95 0.031 0.032 0.063 0.147 120 0.031 0.032 0.063 0.147 130 0.033 0.032 0.065 0.146 140 0.036 0.032 0.068 0.145 150 0.040 0.032 0.072 0.143 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
94 H MAX.
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
D3 H MAX.
D7 H MAX.
0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531
D MAX. 0.531
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212
***T MAX.
STANDARD SERIES MECHANICAL DIMENSIONS
25
26
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.286 0.283 0.279 0.289 0.287 0.285 0.283 0.289 0.291 0.290 0.289 0.289 0.289 0.289 0.288 0.287 0.285 0.283 0.281 0.279 0.278 0.274 0.256 0.255 0.252 0.248 0.247 0.244 0.240 0.239 0.230 0.227 0.220 0.210 0.201 0.196 0.189 0.169
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.181 0.177 0.170 0.186 0.184 0.180 0.176 0.186 0.189 0.188 0.186 0.187 0.187 0.186 0.185 0.183 0.180 0.177 0.174 0.171 0.168 0.163 0.130 0.127 0.120 0.114 0.111 0.104
0.386 0.384 0.381 0.389 0.388 0.386 0.384 0.389 0.390 0.390 0.389 0.389 0.389 0.388 0.388 0.387 0.386 0.384 0.383 0.382 0.380 0.378 0.365 0.364 0.362 0.360 0.359 0.357 0.354 0.353 0.347 0.345 0.341 0.334 0.329 0.326 0.321 0.310
0.486 0.484 0.482 0.488 0.487 0.486 0.484 0.488 0.489 0.488 0.488 0.488 0.488 0.488 0.487 0.487 0.486 0.484 0.483 0.482 0.481 0.479 0.469 0.468 0.467 0.465 0.464 0.463 0.461 0.460 0.455 0.454 0.450 0.445 0.442 0.439 0.436 0.428
0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
No Code 7 H MAX. H MAX. 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790
10 H MAX. 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790
0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790
0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
12mm Zinc Oxide Varistor Dimensions "X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.160 0.197 0.296 0.394 0.492
11 0.045 0.032 0.077 0.140 14 0.055 0.032 0.087 0.134 17 0.068 0.032 0.100 0.125 20 0.033 0.032 0.065 0.146 25 0.039 0.032 0.071 0.143 30 0.047 0.032 0.079 0.139 35 0.056 0.032 0.088 0.134 40 0.032 0.032 0.064 0.147 50 0.022 0.032 0.054 0.151 60 0.027 0.032 0.059 0.149 75 0.033 0.032 0.065 0.146 95 0.031 0.032 0.063 0.147 120 0.031 0.032 0.063 0.147 130 0.034 0.032 0.066 0.146 140 0.037 0.032 0.069 0.144 150 0.040 0.032 0.072 0.143 180 0.047 0.032 0.079 0.139 210 0.055 0.032 0.087 0.134 230 0.061 0.032 0.093 0.130 250 0.066 0.032 0.098 0.126 270 0.071 0.032 0.103 0.122 300 0.079 0.032 0.111 0.115 320 0.084 0.032 0.016 0.148 330 0.087 0.032 0.016 0.151 350 0.092 0.032 0.016 0.156 360 0.097 0.032 0.016 0.161 370 0.099 0.032 0.016 0.163 390 0.103 0.032 0.016 0.167 400 0.109 0.032 0.016 0.173 420 0.111 0.032 0.016 0.175 460 0.122 0.032 0.016 0.186 480 0.126 0.032 0.016 0.190 510 0.134 0.032 0.016 0.198 550 0.145 0.032 0.016 0.209 580 0.153 0.032 0.016 0.217 600 0.158 0.032 0.016 0.222 620 0.164 0.032 0.016 0.228 680 0.179 0.032 0.016 0.243 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC 94 H MAX. 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
D3 H MAX.
D7 H MAX.
0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590
D MAX. H MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411
***T MAX.
STANDARD SERIES
MECHANICAL DIMENSIONS
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.288 0.285 0.281 0.290 0.289 0.287 0.285 0.290 0.292 0.291 0.290 0.291 0.291 0.290 0.289 0.288 0.287 0.284 0.283 0.281 0.279 0.276 0.259 0.257 0.253 0.250 0.250 0.247 0.242 0.241 0.233 0.229 0.222 0.212 0.203 0.197 0.191 0.169 0.130
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.184 0.180 0.174 0.188 0.186 0.183 0.180 0.188 0.191 0.190 0.188 0.189 0.189 0.188 0.187 0.185 0.183 0.179 0.176 0.174 0.171 0.165 0.134 0.131 0.124 0.118 0.116 0.111 0.100
0.388 0.386 0.383 0.390 0.389 0.387 0.386 0.390 0.391 0.390 0.390 0.390 0.390 0.389 0.389 0.388 0.387 0.385 0.384 0.383 0.382 0.379 0.367 0.366 0.363 0.361 0.360 0.359 0.355 0.354 0.349 0.347 0.342 0.335 0.330 0.326 0.323 0.310 0.291 0.259 0.214
0.487 0.485 0.483 0.489 0.488 0.487 0.485 0.488 0.490 0.489 0.489 0.489 0.489 0.488 0.488 0.487 0.486 0.485 0.484 0.483 0.482 0.480 0.470 0.470 0.468 0.466 0.466 0.464 0.462 0.461 0.457 0.455 0.451 0.446 0.443 0.440 0.437 0.428 0.414 0.392 0.364 0.269
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.197 0.296 0.394 0.492
0.160
11 0.045 0.025 0.070 0.144 14 0.055 0.025 0.080 0.139 17 0.068 0.025 0.093 0.130 20 0.033 0.025 0.058 0.149 25 0.039 0.025 0.064 0.147 30 0.047 0.025 0.072 0.143 35 0.056 0.025 0.081 0.138 40 0.034 0.025 0.059 0.149 50 0.023 0.025 0.048 0.153 60 0.028 0.025 0.053 0.151 75 0.033 0.025 0.058 0.149 95 0.031 0.025 0.056 0.150 120 0.031 0.025 0.056 0.150 130 0.035 0.025 0.060 0.148 140 0.038 0.025 0.063 0.147 150 0.042 0.025 0.067 0.145 180 0.049 0.025 0.074 0.142 210 0.057 0.025 0.082 0.137 230 0.063 0.025 0.088 0.134 250 0.068 0.025 0.093 0.130 270 0.073 0.025 0.098 0.126 300 0.082 0.025 0.107 0.119 320 0.087 0.025 0.016 0.144 330 0.090 0.025 0.016 0.147 350 0.096 0.025 0.016 0.153 360 0.101 0.025 0.016 0.158 370 0.102 0.025 0.016 0.159 390 0.106 0.025 0.016 0.163 400 0.113 0.025 0.016 0.170 420 0.115 0.025 0.016 0.172 460 0.126 0.025 0.016 0.183 480 0.130 0.025 0.016 0.187 510 0.139 0.025 0.016 0.196 550 0.150 0.025 0.016 0.207 580 0.158 0.025 0.016 0.215 600 0.164 0.025 0.016 0.221 620 0.169 0.025 0.016 0.226 680 0.186 0.025 0.016 0.243 750 0.209 0.025 0.016 0.266 880 0.240 0.025 0.016 0.297 1000 0.274 0.025 0.016 0.331 1200 0.355 0.025 0.016 0.412 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
No Code 7 H MAX. H MAX. 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850
10 H MAX. 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
14mm Zinc Oxide Varistor Dimensions
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
94 H MAX. 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
D3 H MAX. 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
D7 H MAX.
0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411 0.437 0.476 0.531 0.550
***T MAX.
STANDARD SERIES MECHANICAL DIMENSIONS
27
28
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.286 0.283 0.279 0.289 0.287 0.285 0.283 0.289 0.291 0.290 0.289 0.289 0.289 0.288 0.287 0.287 0.284 0.282 0.280 0.278 0.276 0.273 0.254 0.252 0.248 0.244 0.244 0.241 0.236 0.234 0.225 0.221 0.213 0.202 0.192 0.185 0.179 0.154 0.107
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.181 0.177 0.170 0.186 0.184 0.180 0.176 0.186 0.189 0.188 0.186 0.187 0.187 0.185 0.184 0.183 0.179 0.175 0.172 0.169 0.166 0.160 0.125 0.120 0.114 0.104 0.103
0.386 0.384 0.381 0.389 0.388 0.386 0.384 0.388 0.390 0.389 0.388 0.389 0.389 0.388 0.388 0.387 0.385 0.384 0.382 0.381 0.379 0.377 0.363 0.362 0.360 0.357 0.356 0.354 0.351 0.350 0.344 0.341 0.336 0.330 0.323 0.319 0.315 0.302 0.281 0.246 0.194
0.486 0.484 0.482 0.488 0.487 0.486 0.484 0.488 0.489 0.488 0.488 0.488 0.488 0.487 0.487 0.486 0.485 0.484 0.483 0.482 0.480 0.478 0.468 0.467 0.465 0.463 0.462 0.461 0.458 0.457 0.453 0.451 0.447 0.442 0.438 0.434 0.432 0.422 0.407 0.384 0.353 0.248
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.160 0.197 0.296 0.394 0.492
)
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
No Code 7 H MAX. H MAX. 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012
10 H MAX. 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
18mm Zinc Oxide Varistor Dimensions (20 AWG Wire Only)
11 0.045 0.032 0.077 0.140 14 0.055 0.032 0.087 0.134 17 0.068 0.032 0.100 0.125 20 0.033 0.032 0.065 0.146 25 0.039 0.032 0.071 0.143 30 0.047 0.032 0.079 0.139 35 0.056 0.032 0.088 0.134 40 0.034 0.032 0.066 0.146 50 0.023 0.032 0.055 0.150 60 0.028 0.032 0.060 0.148 75 0.034 0.032 0.066 0.146 95 0.031 0.032 0.063 0.147 120 0.031 0.032 0.063 0.147 130 0.035 0.032 0.067 0.145 140 0.039 0.032 0.071 0.143 150 0.042 0.032 0.074 0.142 180 0.050 0.032 0.082 0.137 210 0.058 0.032 0.090 0.132 230 0.064 0.032 0.096 0.128 250 0.069 0.032 0.101 0.124 270 0.074 0.032 0.106 0.120 300 0.083 0.032 0.115 0.111 320 0.088 0.032 0.016 0.152 330 0.092 0.032 0.016 0.156 350 0.097 0.032 0.016 0.161 360 0.103 0.032 0.016 0.167 370 0.104 0.032 0.016 0.168 390 0.108 0.032 0.016 0.172 400 0.115 0.032 0.016 0.179 420 0.117 0.032 0.016 0.181 460 0.128 0.032 0.016 0.192 480 0.133 0.032 0.016 0.197 510 0.142 0.032 0.016 0.206 550 0.152 0.032 0.016 0.216 580 0.161 0.032 0.016 0.225 600 0.167 0.032 0.016 0.231 620 0.172 0.032 0.016 0.236 680 0.189 0.032 0.016 0.253 750 0.212 0.032 0.016 0.276 880 0.244 0.032 0.016 0.308 1000 0.279 0.032 0.016 0.343 1200 0.361 0.032 0.016 0.425 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
(
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
94 H MAX. 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
D3 H MAX. 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
D7 H MAX.
0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411 0.437 0.476 0.531 0.550
***T MAX.
STANDARD SERIES
MECHANICAL DIMENSIONS
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.284 0.280 0.276 0.287 0.285 0.283 0.280 0.287 0.289 0.288 0.287 0.287 0.287 0.286 0.285 0.284 0.282 0.279 0.277 0.275 0.273 0.269 0.249 0.246 0.243 0.239 0.238 0.235 0.229 0.228 0.218 0.214 0.204 0.193 0.183 0.175 0.168 0.140
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.178 0.173 0.165 0.183 0.180 0.177 0.172 0.183 0.187 0.185 0.183 0.184 0.184 0.182 0.180 0.179 0.175 0.171 0.167 0.164 0.161 0.154 0.115 0.109 0.101
0.385 0.382 0.379 0.387 0.386 0.384 0.382 0.387 0.389 0.388 0.387 0.388 0.388 0.387 0.386 0.385 0.384 0.382 0.380 0.379 0.377 0.374 0.360 0.358 0.356 0.353 0.353 0.350 0.347 0.346 0.339 0.336 0.331 0.324 0.318 0.313 0.309 0.295 0.273 0.235 0.179
0.485 0.483 0.480 0.487 0.486 0.484 0.483 0.486 0.488 0.487 0.486 0.487 0.487 0.486 0.486 0.485 0.484 0.482 0.481 0.480 0.479 0.476 0.465 0.464 0.462 0.460 0.459 0.458 0.455 0.454 0.450 0.447 0.443 0.438 0.433 0.430 0.427 0.417 0.402 0.377 0.345 0.234
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.197 0.296 0.394 0.492
0.160
11 0.045 0.040 0.085 0.136 14 0.055 0.040 0.095 0.129 17 0.068 0.040 0.108 0.118 20 0.033 0.040 0.073 0.142 25 0.039 0.040 0.079 0.139 30 0.047 0.040 0.087 0.134 35 0.056 0.040 0.096 0.128 40 0.034 0.040 0.074 0.142 50 0.023 0.040 0.063 0.147 60 0.028 0.040 0.068 0.145 75 0.034 0.040 0.074 0.142 95 0.031 0.040 0.071 0.143 120 0.031 0.040 0.071 0.143 130 0.035 0.040 0.075 0.141 140 0.039 0.040 0.079 0.139 150 0.042 0.040 0.082 0.137 180 0.050 0.040 0.090 0.132 210 0.058 0.040 0.098 0.126 230 0.064 0.040 0.104 0.122 250 0.069 0.040 0.109 0.117 270 0.074 0.040 0.114 0.112 300 0.083 0.040 0.123 0.102 320 0.088 0.040 0.016 0.160 330 0.092 0.040 0.016 0.164 350 0.097 0.040 0.016 0.169 360 0.103 0.040 0.016 0.175 370 0.104 0.040 0.016 0.176 390 0.108 0.040 0.016 0.180 400 0.115 0.040 0.016 0.187 420 0.117 0.040 0.016 0.189 460 0.128 0.040 0.016 0.200 480 0.133 0.040 0.016 0.205 510 0.142 0.040 0.016 0.214 550 0.152 0.040 0.016 0.224 580 0.161 0.040 0.016 0.233 600 0.167 0.040 0.016 0.239 620 0.172 0.040 0.016 0.244 680 0.189 0.040 0.016 0.261 750 0.212 0.040 0.016 0.284 880 0.244 0.040 0.016 0.316 1000 0.279 0.040 0.016 0.351 1200 0.361 0.040 0.016 0.433 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
No Code 7 H MAX. H MAX. 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012
10 H MAX. 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
18mm Zinc Oxide Varistor Dimensions (18 AWG Wire Only)
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
94 H MAX. 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
D3 H MAX. 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
D7 H MAX.
0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411 0.437 0.476 0.531 0.550
***T MAX.
STANDARD SERIES MECHANICAL DIMENSIONS
29
30
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
)
0.286 0.283 0.279 0.289 0.287 0.285 0.283 0.289 0.291 0.290 0.289 0.289 0.289 0.288 0.287 0.287 0.284 0.282 0.280 0.278 0.276 0.273 0.254 0.252 0.248 0.244 0.244 0.241 0.236 0.234 0.225 0.221 0.213 0.202 0.192 0.185 0.179 0.154 0.107
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.181 0.177 0.170 0.186 0.184 0.180 0.176 0.186 0.189 0.188 0.186 0.187 0.187 0.185 0.184 0.183 0.179 0.175 0.172 0.169 0.166 0.160 0.125 0.120 0.114 0.104 0.103
0.386 0.384 0.381 0.389 0.388 0.386 0.384 0.388 0.390 0.389 0.388 0.389 0.389 0.388 0.388 0.387 0.385 0.384 0.382 0.381 0.379 0.377 0.363 0.362 0.360 0.357 0.356 0.354 0.351 0.350 0.344 0.341 0.336 0.330 0.323 0.319 0.315 0.302 0.281 0.246 0.194
0.486 0.484 0.482 0.488 0.487 0.486 0.484 0.488 0.489 0.488 0.488 0.488 0.488 0.487 0.487 0.486 0.485 0.484 0.483 0.482 0.480 0.478 0.468 0.467 0.465 0.463 0.462 0.461 0.458 0.457 0.453 0.451 0.447 0.442 0.438 0.434 0.432 0.422 0.407 0.384 0.353 0.248
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
No Code 7 H MAX. H MAX. 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105
10 H MAX. 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
20mm Zinc Oxide Varistor Dimensions (20 AWG Wire Only)
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.160 0.197 0.296 0.394 0.492
11 0.045 0.032 0.077 0.140 14 0.055 0.032 0.087 0.134 17 0.068 0.032 0.100 0.125 20 0.033 0.032 0.065 0.146 25 0.039 0.032 0.071 0.143 30 0.047 0.032 0.079 0.139 35 0.056 0.032 0.088 0.134 40 0.034 0.032 0.066 0.146 50 0.023 0.032 0.055 0.150 60 0.028 0.032 0.060 0.148 75 0.034 0.032 0.066 0.146 95 0.031 0.032 0.063 0.147 120 0.031 0.032 0.063 0.147 130 0.035 0.032 0.067 0.145 140 0.039 0.032 0.071 0.143 150 0.042 0.032 0.074 0.142 180 0.050 0.032 0.082 0.137 210 0.058 0.032 0.090 0.132 230 0.064 0.032 0.096 0.128 250 0.069 0.032 0.101 0.124 270 0.074 0.032 0.106 0.120 300 0.083 0.032 0.115 0.111 320 0.088 0.032 0.016 0.152 330 0.092 0.032 0.016 0.156 350 0.097 0.032 0.016 0.161 360 0.103 0.032 0.016 0.167 370 0.104 0.032 0.016 0.168 390 0.108 0.032 0.016 0.172 400 0.115 0.032 0.016 0.179 420 0.117 0.032 0.016 0.181 460 0.128 0.032 0.016 0.192 480 0.133 0.032 0.016 0.197 510 0.142 0.032 0.016 0.206 550 0.152 0.032 0.016 0.216 580 0.161 0.032 0.016 0.225 600 0.167 0.032 0.016 0.231 620 0.172 0.032 0.016 0.236 680 0.189 0.032 0.016 0.253 750 0.212 0.032 0.016 0.276 880 0.244 0.032 0.016 0.308 1000 0.279 0.032 0.016 0.343 1200 0.361 0.032 0.016 0.425 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
(
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
94 H MAX. 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
D3 H MAX. 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
D7 H MAX.
0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411 0.437 0.476 0.531 0.550
***T MAX.
STANDARD SERIES
MECHANICAL DIMENSIONS
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.284 0.280 0.276 0.287 0.285 0.283 0.280 0.287 0.289 0.288 0.287 0.287 0.287 0.286 0.285 0.284 0.282 0.279 0.277 0.275 0.273 0.269 0.249 0.246 0.243 0.239 0.238 0.235 0.229 0.228 0.218 0.214 0.204 0.193 0.183 0.175 0.168 0.140
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.178 0.173 0.165 0.183 0.180 0.177 0.172 0.183 0.187 0.185 0.183 0.184 0.184 0.182 0.180 0.179 0.175 0.171 0.167 0.164 0.161 0.154 0.115 0.109 0.101
0.385 0.382 0.379 0.387 0.386 0.384 0.382 0.387 0.389 0.388 0.387 0.388 0.388 0.387 0.386 0.385 0.384 0.382 0.380 0.379 0.377 0.374 0.360 0.358 0.356 0.353 0.353 0.350 0.347 0.346 0.339 0.336 0.331 0.324 0.318 0.313 0.309 0.295 0.273 0.235 0.179
0.485 0.483 0.480 0.487 0.486 0.484 0.483 0.486 0.488 0.487 0.486 0.487 0.487 0.486 0.486 0.485 0.484 0.482 0.481 0.480 0.479 0.476 0.465 0.464 0.462 0.460 0.459 0.458 0.455 0.454 0.450 0.447 0.443 0.438 0.433 0.430 0.427 0.417 0.402 0.377 0.345 0.234
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.160 0.197 0.296 0.394 0.492
)
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
No Code 7 H MAX. H MAX. 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105
10 H MAX. 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
20mm Zinc Oxide Varistor Dimensions (18 AWG Wire Only)
11 0.045 0.040 0.085 0.136 14 0.055 0.040 0.095 0.129 17 0.068 0.040 0.108 0.118 20 0.033 0.040 0.073 0.142 25 0.039 0.040 0.079 0.139 30 0.047 0.040 0.087 0.134 35 0.056 0.040 0.096 0.128 40 0.034 0.040 0.074 0.142 50 0.023 0.040 0.063 0.147 60 0.028 0.040 0.068 0.145 75 0.034 0.040 0.074 0.142 95 0.031 0.040 0.071 0.143 120 0.031 0.040 0.071 0.143 130 0.035 0.040 0.075 0.141 140 0.039 0.040 0.079 0.139 150 0.042 0.040 0.082 0.137 180 0.050 0.040 0.090 0.132 210 0.058 0.040 0.098 0.126 230 0.064 0.040 0.104 0.122 250 0.069 0.040 0.109 0.117 270 0.074 0.040 0.114 0.112 300 0.083 0.040 0.123 0.102 320 0.088 0.040 0.016 0.160 330 0.092 0.040 0.016 0.164 350 0.097 0.040 0.016 0.169 360 0.103 0.040 0.016 0.175 370 0.104 0.040 0.016 0.176 390 0.108 0.040 0.016 0.180 400 0.115 0.040 0.016 0.187 420 0.117 0.040 0.016 0.189 460 0.128 0.040 0.016 0.200 480 0.133 0.040 0.016 0.205 510 0.142 0.040 0.016 0.214 550 0.152 0.040 0.016 0.224 580 0.161 0.040 0.016 0.233 600 0.167 0.040 0.016 0.239 620 0.172 0.040 0.016 0.244 680 0.189 0.040 0.016 0.261 750 0.212 0.040 0.016 0.284 880 0.244 0.040 0.016 0.316 1000 0.279 0.040 0.016 0.351 1200 0.361 0.040 0.016 0.433 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
(
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
94 H MAX. 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
D3 H MAX.
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
D7 H MAX.
0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411 0.437 0.476 0.531 0.550
***T MAX.
STANDARD SERIES MECHANICAL DIMENSIONS
31
32
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.293 0.293 0.293 0.293 0.293 0.293 0.293 0.287 0.289 0.288 0.287 0.287 0.287 0.286 0.285 0.284 0.282 0.279 0.277 0.275 0.273 0.269 0.252 0.246 0.243 0.239 0.238 0.235 0.229 0.228 0.218 0.214 0.204 0.193 0.183 0.175 0.168 0.140
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.193 0.193 0.193 0.193 0.193 0.193 0.193 0.183 0.187 0.185 0.183 0.184 0.184 0.182 0.180 0.179 0.175 0.171 0.167 0.164 0.161 0.154 0.122 0.109 0.101
0.392 0.392 0.392 0.392 0.392 0.392 0.392 0.387 0.389 0.388 0.387 0.388 0.388 0.387 0.386 0.385 0.384 0.382 0.380 0.379 0.377 0.374 0.362 0.358 0.356 0.353 0.353 0.350 0.347 0.346 0.339 0.336 0.331 0.324 0.318 0.313 0.309 0.295 0.273 0.235 0.179
0.490 0.490 0.490 0.490 0.490 0.490 0.490 0.486 0.488 0.487 0.486 0.487 0.487 0.486 0.486 0.485 0.484 0.482 0.481 0.480 0.479 0.476 0.467 0.464 0.462 0.460 0.459 0.458 0.455 0.454 0.450 0.447 0.443 0.438 0.433 0.430 0.427 0.417 0.402 0.377 0.345 0.234
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.197 0.296 0.394 0.492
0.160
11 0.040 0.040 0.155 14 0.040 0.040 0.155 17 0.040 0.040 0.155 20 0.040 0.040 0.155 25 0.040 0.040 0.155 30 0.040 0.040 0.155 35 0.040 0.040 0.155 40 0.034 0.040 0.074 0.142 50 0.023 0.040 0.063 0.147 60 0.028 0.040 0.068 0.145 75 0.034 0.040 0.074 0.142 95 0.031 0.040 0.071 0.143 120 0.031 0.040 0.071 0.143 130 0.035 0.040 0.075 0.141 140 0.039 0.040 0.079 0.139 150 0.042 0.040 0.082 0.137 180 0.050 0.040 0.090 0.132 210 0.058 0.040 0.098 0.126 230 0.064 0.040 0.104 0.122 250 0.069 0.040 0.109 0.117 270 0.074 0.040 0.114 0.112 300 0.083 0.040 0.123 0.102 320 0.083 0.040 0.016 0.155 330 0.092 0.040 0.016 0.164 350 0.097 0.040 0.016 0.169 360 0.103 0.040 0.016 0.175 370 0.104 0.040 0.016 0.176 390 0.108 0.040 0.016 0.180 400 0.115 0.040 0.016 0.187 420 0.117 0.040 0.016 0.189 460 0.128 0.040 0.016 0.200 480 0.133 0.040 0.016 0.205 510 0.142 0.040 0.016 0.214 550 0.152 0.040 0.016 0.224 580 0.161 0.040 0.016 0.233 600 0.167 0.040 0.016 0.239 620 0.172 0.040 0.016 0.244 680 0.189 0.040 0.016 0.261 750 0.212 0.040 0.016 0.284 880 0.244 0.040 0.016 0.316 1000 0.279 0.040 0.016 0.351 1200 0.361 0.040 0.016 0.433 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225
1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225
No Code 7 H MAX. H MAX. 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300
10 H MAX. 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300
1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300
1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300
1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225
1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
25mm Zinc Oxide Varistor Dimensions
1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225
94 H MAX.
D3 H MAX. 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225
D7 H MAX.
1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411 0.437 0.476 0.531 0.550
***T MAX.
STANDARD SERIES
MECHANICAL DIMENSIONS
STANDARD SERIES INTRODUCTION The Standard Series is our broadest and most comprehensive line of radial-leaded varistors. These components consist of wire leads and have nominal disk diameters from 3mm to 25mm. They are available with maximum continuous operating voltages (MCOV) ranging from 11VAC to 1000VAC. The Standard Series is designed to handle most low and medium power applications requiring through-hole components. Most sizes are available in Tape and Reel and ammo pack. Style Designation The Maida style number is the primary means to identify our components when ordered. The style number identifies several parameters that are important for the characteristics of the device. Observe the following part numbering system when ordering our components: D _ _ _ _ ZOV_ _ _ RA _ _ _ 1. Coating Designation D – Standard Epoxy Coating No code with 31 lead code denotes no coating. 2. Nominal Disk Diameter 56 – 3mm 79 – 15mm 58 – 5mm 64 – 16mm 73 – 7mm 63 – 18mm 61 – 10mm 65 – 20mm 71 – 11mm 66 – 25mm 62 – 12mm 69 – 14mm 3. Lead Configuration code (refer to lead codes) 4. Material Identifier, zinc-oxide varistor 5. AC Voltage Rating code, two significant figures plus number of zeroes that follow, e.g. 511 is 510 VAC 6. Special Instructions code, RA is standard 7. Energy Rating code, up to three numbers (refer to ratings tables)
Standard Marking Minimum marking information shall consist of an abbreviated style designation and, when space is available, the manufacturer’s initials "MDC" or the company logo. For example: MDC Z511 110UL Where: Z – Represents "ZOV" 511 – AC voltage rating code 110 – Energy rating code UL – UL recognition if applicable A manufacturing date code is available upon request. Other safety agency designations are included if applicable. How to Order the Standard Series The following specifications tables provide a way to match the Maida style number to a varistor that provides the necessary specifications for a specific application. Once the general style number is obtained, it will be necessary to determine the required lead configuration. Refer to the lead codes section and add the required code to the Maida style number when ordering. Custom lead configurations are available. our engineering department for additional information. Dimensions such as mounting height above the seating plane, lead spacing, and maximum thickness with regards to each lead code is available in the mechanical dimensions tables.
An example of a typical Maida style number is D6521ZOV151RA20. This style number displays a nominal disk size of 20mm, a standard lead code showing straight wire leads, a maximum AC continuous operating voltage of 150 VAC.
For more information call us at (757) 723-0785 or e-mail us at: [email protected]
2
STANDARD SERIES SPECIFICATIONS
11, 14, and 17 VAC Varistors Continuous
D58ZOV110RA00 D73ZOV110RA01 D6121ZOV110RA02 D6921ZOV110RA04 D6521ZOV110RA10
Recognitions To Nominal Safety Size Agency Standards A B C D E F (mm) X X 5 X X 7 X X 10 X X 14 X X 20
D56ZOV140RA0R1 D58ZOV140RA00 D73ZOV140RA01 D6121ZOV140RA02 D6921ZOV140RA04 D6521ZOV140RA13
X X X X X
X X X X X
3 5 7 10 14 20
D56ZOV170RAR12 D58ZOV170RA00 D73ZOV170RA01 D6121ZOV170RA03 D6921ZOV170RA05 D6521ZOV170RA15
X X X X X
X X X X X
3 5 7 10 14 20
Maida Style Number
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
(AC) 11 11 11 11 11
(DC) 14 14 14 14 14
10 x 1000 µ sec (J) 0.6 1.1 2.6 5.2 13
Z14 Z140 - 00UL Z140 - 01UL Z140 - 02UL Z140 - 04UL Z140 - 13UL
14 14 14 14 14 14
18 18 18 18 18 18
0.1 0.7 1.3 3.2 6.3 16
N/A N/A N/A N/A N/A N/A
50 250 500 1000 2000 3000
25 125 250 500 1000 2000
20 20 20 20 20 20
24 24 24 24 24 24
55 48 43 43 43 43
1 1 2.5 5 10 20
500 2000 2800 6000 15000 30000
Z17 Z170 - 00UL Z170 - 01UL Z170 - 03UL Z170 - 05UL Z170 - 15UL
17 17 17 17 17 17
22 22 22 22 22 22
0.12 0.9 1.6 3.9 7.8 19
N/A N/A N/A N/A N/A N/A
50 250 500 1000 2000 3000
25 125 250 500 1000 2000
24 24 24 24 24 24
30 30 30 30 30 30
67 60 53 53 53 53
1 1 2.5 5 10 20
400 1600 2000 4000 10000 22000
Z110 Z110 Z110 Z110 Z110
-
00UL 01UL 02UL 04UL 10UL
8 x 20 µ sec (J) N/A N/A N/A N/A N/A
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 250 125 500 250 1000 500 2000 1000 3000 2000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20µ sec) (V) (V) (V) (A) (pF) 16 20 40 1 2200 16 20 36 2.5 3500 16 20 36 5 7500 16 20 36 10 18000 16 20 36 20 37000
NOTES: NOTES: A = UL1449 File E86730 - Transient Voltage Surgeand Suppression D = Agencies. VDE/CECC 42000/42201 & IEC 1051 Appendix A lists the single-pulse peak current energy ratings on file with the Safety B = UL1414 Filetransient E38785rating - Across - The in Line = UL497B - File E180012 Maximum specified thisApplications table are valid. They may differ from thoseEshown in Appendix A. A = UL1449 FileLR33458 E86730 - Transient Voltage Surge Suppression D = VDE/CECC & IEC 1051 C = CSA C22.2 File F = SEV 42000/42201 - 96.7 70250.01 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) [ Size code
H
D
]
Z
d
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81]
Y D56 D58 D73 D61 D69 D65
0.322 0.197 [8.18] [5.00] 0.423 0.298 [10.74] [7.57] 0.472 0.354 [11.99] [8.99] 0.597 0.472 [15.16] [11.99] 0.770 0.650 [19.56] [16.51] 1.020 0.905 [25.91] [22.99]
OFFSET AND THICKNESS 14 17 VAC VAC T Y T Y T 0.069 0.165 0.080 0.170 N/A [1.75] [4.19] [2.03] [4.32] 0.161 0.074 0.165 0.085 0.170 [4.09] [1.88] [4.19] [2.16] [4.32] 0.161 0.074 0.165 0.085 0.170 [4.09] [1.88] [4.19] [2.16] [4.32] 0.161 0.081 0.165 0.092 0.170 [4.09] [2.06] [4.19] [2.34] [4.32] 0.161 0.081 0.165 0.092 0.170 [4.09] [2.06] [4.19] [2.34] [4.32] 0.161 0.081 0.165 0.092 0.170 [4.09] [2.06] [4.19] [2.34] [4.32]
11 VAC N/A 0.065 [1.65] 0.065 [1.65] 0.072 [1.83] 0.072 [1.83] 0.072 [1.83]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
3
STANDARD SERIES SPECIFICATIONS
20, 25, and 30 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
A B C D E F
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
Z20 Z200 - 00UL Z200 - 01UL Z200 - 03UL Z200 - 06UL Z200 - 20UL
(AC) 20 20 20 20 20 20
(DC) 26 26 26 26 26 26
10 x 1000 µ sec (J) 0.15 1.1 2 4.8 9.5 24
8 x 20 µ sec (J) N/A N/A N/A N/A N/A N/A
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 50 25 250 125 500 250 1000 500 2000 1000 3000 2000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) (V) (V) (A) (pF) 30 36 73 1 487 30 36 73 1 1675 30 36 65 2.5 3614 30 36 65 5 6655 30 36 65 10 14447 30 36 65 20 33064
D56ZOV200RA0R15 D58ZOV200RA00 D73ZOV200RA01 D6121ZOV200RA03 D6921ZOV200RA06 D6521ZOV200RA20
X X X X X
X X X X X
(mm) 3 5 7 10 14 20
D56ZOV250RA0R18 D58ZOV250RA01 D73ZOV250RA02 D6121ZOV250RA04 D6921ZOV250RA07 D6521ZOV250RA24
X X X X X
X X X X X
3 5 7 10 14 20
Z25 Z250 - 01UL Z250 - 02UL Z250 - 04UL Z250 - 07UL Z250 - 24UL
25 25 25 25 25 25
31 31 31 31 31 31
0.18 1.2 2.4 5.6 11 28
N/A N/A N/A N/A N/A N/A
50 250 500 1000 2000 3000
25 125 250 500 1000 2000
35 35 35 35 35 35
43 43 43 43 43 43
86 86 77 77 77 77
1 1 2.5 5 10 20
412 1417 3058 5632 12225 27977
D56ZOV300RA0R2 D58ZOV300RA01 D73ZOV300RA02 D6121ZOV300RA05 D6921ZOV300RA09 D6321ZOV300RA26 D6521ZOV300RA30
X X X X X X
X X X X X X
3 5 7 10 14 18 20
Z30 Z300 - 01UL Z300 - 02UL Z300 - 05UL Z300 - 09UL Z300 - 26UL Z300 - 30UL
30 30 30 30 30 30 30
38 38 38 38 38 38 38
0.2 1.5 2.8 6.8 14 26 34
N/A N/A N/A N/A N/A N/A N/A
50 250 500 1000 2000 2500 3000
25 125 250 500 1000 1500 2000
42 42 42 42 42 42 42
52 52 52 52 52 52 52
99 99 93 93 93 93 93
1 1 2.5 5 10 20 20
342 1176 2537 4673 10144 18230 23215
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D61 D69 D63 D65
H
D
Z
d
0.322 [8.18] 0.423 [10.74] 0.479 [12.17] 0.597 [15.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16]
0.197 [5.00] 0.298 [7.57] 0.354 [8.99] 0.472 [11.99] 0.650 [16.51] 0.812 [20.62] 0.905 [22.99]
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81]
OFFSET AND THICKNESS 25 30 VAC VAC T Y T Y T 0.176 0.059 0.182 0.067 0.190 [4.47] [1.50] [4.62] [1.70] [4.83] 0.176 0.064 0.182 0.072 0.190 [4.47] [1.63] [4.62] [1.83] [4.83] 0.176 0.064 0.182 0.072 0.190 [4.47] [1.63] [4.62] [1.83] [4.83] 0.176 0.071 0.182 0.079 0.190 [4.47] [1.80] [4.62] [2.00] [4.83] 0.176 0.071 0.182 0.079 0.190 [4.47] [1.80] [4.62] [2.00] [4.83] 0.079 0.190 N/A N/A N/A [2.00] [4.83] 0.176 0.071 0.182 0.079 0.190 [4.47] [1.80] [4.62] [2.00] [4.83]
20 VAC Y 0.053 [1.35] 0.058 [1.47] 0.058 [1.47] 0.065 [1.65] 0.065 [1.65] N/A 0.065 [1.65]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
4
STANDARD SERIES SPECIFICATIONS
35, 40, and 50 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
D56ZOV350RA0R25 D58ZOV350RA01 D73ZOV350RA02 D6121ZOV350RA06 D6921ZOV350RA10 D6521ZOV350RA35
X X X X X
X X X X X
(mm) 3 5 7 10 14 20
Z35 Z350 - 01UL Z350 - 02UL Z350 - 06UL Z350 - 10UL Z350 - 35UL
(AC) 35 35 35 35 35 35
(DC) 45 45 45 45 45 45
10 x 1000 µ sec (J) 0.25 1.8 3.4 8.1 16 41
D56ZOV400RA0R3 D58ZOV400RA01 D73ZOV400RA03 D6121ZOV400RA07 D6921ZOV400RA12 D6521ZOV400RA40
X X X X X
X X X X X
3 5 7 10 14 20
Z40 Z400 - 01UL Z400 - 03UL Z400 - 07UL Z400 - 12UL Z400 - 40UL
40 40 40 40 40 40
56 56 56 56 56 56
0.3 2.2 5.2 13 20 49
N/A N/A N/A N/A N/A N/A
50 250 500 1000 2000 3000
25 125 250 500 1000 2000
61 61 61 61 61 61
75 75 75 75 75 75
138 138 135 135 135 135
1 1 2.5 5 10 20
133 438 945 1627 3285 7517
D56ZOV500RA0R4 D58ZOV500RA01 D73ZOV500RA02 D6121ZOV500RA03 D7121ZOV500RA04 D6221ZOV500RA05 D6921ZOV500RA06 D6521ZOV500RA42
X X X X X X X
X X X
3 5 7 10 11 12 14 20
Z50 Z500 - 01UL Z500 - 02UL Z500 - 03UL Z500 - 04UL Z500 - 05UL Z500 - 06UL Z500 - 42UL
50 50 50 50 50 50 50 50
66 66 66 66 66 66 66 66
0.4 3.5 7 14 19 22 28 56
N/A N/A N/A N/A N/A N/A N/A N/A
50 800 1750 3500 4000 4500 6000 10000
25 600 1250 2500 2800 3200 5000 7000
74 74 74 74 74 74 74 74
90 90 90 90 90 90 90 90
163 163 157 147 147 147 147 147
2 5 10 25 30 40 50 100
109 364 767 1375 1533 2602 2829 5041
A B C D E F
X X X
8 x 20 µ sec (J) N/A N/A N/A N/A N/A N/A
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 50 25 250 125 500 250 1000 500 2000 1000 3000 2000
Electrical Characteristics Max Varistor Clamping Typical Cap. Voltage Voltage @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20µ sec) (V) (V) (V) (A) (pF) 50 62 117 1 287 50 62 117 1 987 50 62 110 2.5 2130 50 62 110 5 3922 50 62 110 10 8514 50 62 110 20 19484
NOTES: NOTES: A = UL1449 FileA E86730 Transient Voltage Surge and Suppression = file VDE/CECC 42000/42201 & IEC 1051 Appendix lists the -single-pulse peak current energy ratingsDon with the Safety Agencies. B = UL1414 Filetransient E38785 rating - Across - The Line Applications E =differ UL497B File E180012 Maximum specified in this table are valid. They may from -those shown in Appendix A. C = CSA File LR33458 A = C22.2 UL1449 File E86730 - Transient Voltage Surge Suppression F = SEV - 96.7 D = 70250.01 VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D61 D71 D62 D69 D65
H
D
Z
d
0.322 [8.18] 0.423 [10.74] 0.479 [12.17] 0.597 [15.16] 0.656 [16.66] 0.715 [18.16] 0.775 [19.69] 1.030 [26.16]
0.197 [5.07] 0.298 [7.57] 0.354 [8.99] 0.472 [11.99] 0.531 [13.49] 0.590 [14.99] 0.650 [16.51] 0.905 [22.99]
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81]
OFFSET AND THICKNESS 40 50 VAC VAC T Y T Y T 0.199 0.054 0.211 0.039 0.174 [5.05] [1.37] [5.36] [0.99] [4.42] 0.199 0.059 0.211 0.046 0.174 [5.05] [1.50] [5.36] [1.17] [4.42] 0.199 0.059 0.211 0.046 0.174 [5.05] [1.50] [5.36] [1.17] [4.42] 0.199 0.066 0.211 0.054 0.174 [5.05] [1.68] [5.36] [1.37] [4.42] 0.054 0.174 N/A N/A N/A [1.37] [4.42] 0.054 0.174 N/A N/A N/A [1.37] [4.42] 0.199 0.066 0.211 0.055 0.174 [5.05] [1.68] [5.36] [1.40] [4.42] 0.199 0.066 0.211 0.055 0.225 [5.05] [1.68] [5.36] [1.40] [5.72]
35 VAC Y 0.076 [1.93] 0.081 [2.06] 0.081 [2.06] 0.088 [2.24] N/A N/A 0.088 [2.24] 0.088 [2.24]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
5
STANDARD SERIES SPECIFICATIONS
60, 75, and 95 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
A B C D E F D56ZOV600RA0R5 D58ZOV600RA01 D73ZOV600RA02 D6121ZOV600RA03 D7121ZOV600RA04 D6221ZOV600RA05 D6921ZOV600RA06 D6521ZOV600RA45
X X X X X X X
X X X
D56ZOV750RA0R6 D58ZOV750RA01 D73ZOV750RA02 D6121ZOV750RA03 D7121ZOV750RA04 D6221ZOV750RA05 D6921ZOV750RA06 D6521ZOV750RA55
X X X X X X X
X X X
D56ZOV950RA0R7 D58ZOV950RA01 D73ZOV950RA02 D6121ZOV950RA03 D7121ZOV950RA04 D6221ZOV950RA05 D6921ZOV950RA06 D6521ZOV950RA65
X X X X X X X
X X X
X X X
X X X
X X X
Continuous Nominal Size
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy 8 x 20 µ sec (J) N/A N/A N/A N/A N/A N/A N/A N./A
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 50 25 800 600 1750 1250 3500 2500 4000 2800 4500 3200 6000 5000 10000 7000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) (V) (V) (A) (pF) 90 110 200 2 92 90 110 190 5 299 90 110 180 10 629 90 110 175 25 1128 90 110 175 30 1257 90 110 175 40 2133 90 110 175 50 2319 90 110 175 100 5264
(mm) 3 5 7 10 11 12 14 20
Z60 Z600 - 01UL Z600 - 02UL Z600 - 03UL Z600 - 04UL Z600 - 05UL Z600 - 06UL Z600 - 45UL
(AC) 60 60 60 60 60 60 60 60
(DC) 81 81 81 81 81 81 81 81
10 x 1000 µ sec (J) 0.5 4.5 9 18 20 22 36 72
3 5 7 10 11 12 14 20
Z75 Z750 - 01UL Z750 - 02UL Z750 - 03UL Z750 - 04UL Z750 - 05UL Z750 - 06UL Z750 - 55UL
75 75 75 75 75 75 75 75
102 102 102 102 102 102 102 102
0.6 5.5 11 22 22 27 44 88
N/A N/A N/A N/A N/A N/A N/A N./A
100 800 1750 3500 4000 4500 6000 10000
50 600 1250 2500 2800 3200 5000 7000
108 108 108 108 108 108 108 108
132 132 132 132 132 132 132 132
220 220 220 210 210 210 210 210
2 5 10 25 30 40 50 100
77 249 524 940 1048 1778 1933 4387
3 5 7 10 11 12 14 20
Z95 Z950 - 01UL Z950 - 02UL Z950 - 03UL Z950 - 04UL Z950 - 05UL Z950 - 06UL Z950 - 65UL
95 95 95 95 95 95 95 95
127 127 127 127 127 127 127 127
0.7 6.6 13 25 28 33 53 106
N/A N/A N/A N/A N/A N/A N/A N/A
100 800 1750 3500 4000 4500 6000 10000
50 600 1250 2500 2800 3200 5000 7000
135 135 135 135 135 135 135 135
165 165 165 165 165 165 165 165
240 240 255 255 255 255 255 255
2 5 10 25 30 40 50 100
34 118 255 469 537 924 1019 2331
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D61 D71 D62 D69 D65
H
D
0.322 0.197 [8.18] [5.0] 0.423 0.298 [10.74] [7.57] 0.479 0.354 [12.17] [8.99] 0.597 0.472 [15.16] [12.0] 0.656 0.531 [16.66] [13.49] 0.715 0.590 [18.16] [15.0] 0.775 0.650 [19.69] [16.51] 1.030 0.905 [26.16] [22.99]
Z
d
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81]
OFFSET AND THICKNESS 75 95 VAC VAC T Y T Y T 0.243 0.48 0.184 0.047 0.191 [6.17] [1.22] [4.67] [1.19] [4.85] 0.243 0.055 0.184 0.052 0.191 [6.17] [1.40] [4.67] [1.32] [4.85] 0.178 0.056 0.184 0.052 0.191 [4.52] [1.42] [4.67] [1.32] [4.85] 0.178 0.064 0.184 0.059 0.191 [4.52] [1.63] [4.67] [1.50] [4.85] 0.178 0.064 0.184 0.059 0.191 [4.52] [1.63] [4.67] [1.50] [4.85] 0.178 0.065 0.184 0.059 0.191 [4.52] [1.65] [4.67] [1.50] [4.85] 0.178 0.065 0.184 0.059 0.191 [4.52] [1.65] [4.67] [1.50] [4.85] 0.243 0.066 0.172 0.059 0.179 [6.17] [1.68] [4.37] [1.50] [4.55]
60 VAC Y 0.044 [1.12] 0.050 [1.27] 0.051 [1.30] 0.058 [1.47] 0.059 [1.15] 0.059 [1.15] 0.060 [1.52] 0.060 [1.52]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
6
STANDARD SERIES SPECIFICATIONS 120 and 130 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
A B C D E F D56ZOV121RA0R9 D58ZOV121RA02 D73ZOV121RA03 D68ZOV121RA03 D6121ZOV121RA04 D7121ZOV121RA05 D6221ZOV121RA07 D6921ZOV121RA09 D6421ZOV121RA10 D6321ZOV121RA65 D6521ZOV121RA20
X X X X X X X X X X X X X X X X
X X X X X X X X X
D56ZOV131RA1R0 D58ZOV131RA02 D73ZOV131RA03 D68ZOV131RA03 D6121ZOV131RA04 D7121ZOV131RA05 D6221ZOV131RA07 D6921ZOV131RA09 D6421ZOV131RA10 D6321ZOV131RA70 D6521ZOV131RA20 D6694ZOV131RA140
X X X X X X X X X X X X X X X X X X X
X X X X X X X X X X
X X X X X
X
X X X X X X X X X X X X X X X X X X X X X X X
Minimum Marking
Maximum Ratings Transient Energy
Applied Voltage
(mm) 3 5 7 8 10 11 12 14 16 18 20
Z121 Z121 - 02UL Z121 - 03UL Z121 - 03UL Z121 - 04UL Z121 - 05UL Z121 - 07UL Z121 - 09UL Z121 - 10UL Z121 - 65UL Z121 - 20UL
(AC) 120 120 120 120 120 120 120 120 120 120 120
(DC) 160 160 160 160 160 160 160 160 160 160 160
10 x 1000 µ sec (J) 0.9 8 16 19 33 36 41 52 58 65 130
3 5 7 8 10 11 12 14 16 18 20 25
Z131 Z131 - 02UL Z131 - 03UL Z131 - 03UL Z131 - 04UL Z131 - 05UL Z131 - 07UL Z131 - 09UL Z131 - 10UL Z131 - 70UL Z131 - 20UL Z131 - 140UL
130 130 130 130 130 130 130 130 130 130 130 130
175 175 175 175 175 175 175 175 175 175 175 175
1 8.5 17.5 27 45 48 53 70 100 130 150 170
8 x 20 µ sec (J) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1 8.5 17.5 27 45 48 53 70 100 130 150 170
Electrical Characteristics
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 2500 1700 3500 2500 4000 2800 4500 3200 6000 5000 6300 5300 7500 6500 10000 7000
Vmin (V) 170 170 170 170 170 170 170 170 170 170 170
Vmax (V) 207 207 207 207 207 207 207 207 207 207 207
100 800 1750 2300 3500 4000 4500 6500 7700 9000 12000 18000
184 184 184 184 184 184 184 184 184 184 184 184
224 224 224 224 224 224 224 224 224 224 224 224
50 600 1250 1500 2500 2800 3200 5000 6000 7000 9000 13000
Varistor Voltage @1 mA DC
Max Clamping Voltage (@Test Current) (8 x 20 µ sec) (V) (A) 310 2 310 5 320 10 320 15 320 25 320 30 320 40 320 50 320 70 320 100 320 100 350 350 340 340 340 340 340 340 340 340 340 340
2 5 10 15 25 30 40 50 70 100 100 100
Typical Cap. 1 V rms @1kHz (pF) 34 118 255 327 469 537 924 1019 1506 1830 2331 34 116 250 316 438 494 835 890 1304 1571 2001 3634
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D68 D61 D71 D62 D69 D64 D63 D65 D66
H
D
Z
d
0.322 [8.18] 0.423 [10.74] 0.479 [12.17] 0.519 [13.18] 0.597 [15.16] 0.656 [16.66] 0.715 [18.16] 0.775 [19.69] 0.835 [21.21] 0.912 [23.16] 1.030 [26.16] 1.250 [31.75]
0.197 [5.0] 0.298 [7.57] 0.354 [4.31] 0.394 [10.0] 0.472 [12.0] 0.531 [13.49] 0.590 [14.99] 0.650 [16.51] 0.710 [18.03] 0.787 [19.99] 0.905 [22.99] 1.100 [27.94]
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.500 [12.7]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 120 VAC Y T 0.054 0.201 [1.37] [5.11] 0.061 0.204 [1.55] [5.18] 0.059 0.201 [1.50] [5.11] 0.059 0.201 [1.50] [5.11] 0.066 0.201 [1.68] [5.11] 0.066 0.201 [1.68] [5.11] 0.066 0.201 [1.68] [5.11] 0.066 0.201 [1.68] [5.11] 0.066 0.201 [1.68] [5.11] 0.066 0.201 [1.68] [5.11] 0.066 0.201 [1.68] [5.11] N/A
N/A
THICKNESS 130 VAC Y T 0.056 0.204 [1.42] [5.18] 0.065 0.208 [1.65] [5.28] 0.061 0.204 [1.55] [5.18] 0.061 0.204 [1.55] [5.18] 0.068 0.204 [1.73] [5.18] 0.068 0.204 [1.73] [5.18] 0.068 0.204 [1.73] [5.18] 0.068 0.204 [1.73] [5.18] 0.068 0.204 [1.73] [5.18] 0.068 0.204 [1.73] [5.18] 0.068 0.204 [1.73] [5.18] 0.076 0.198 [1.93] [5.03]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
7
STANDARD SERIES SPECIFICATIONS 140 and 150 VAC Varistors Recognitions Maida Style Number
D56ZOV141RA1R1 D58ZOV141RA02 D73ZOV141RA03 D68ZOV141RA03 D6121ZOV141RA04 D7121ZOV141RA05 D6221ZOV141RA07 D6921ZOV141RA09 D6421ZOV141RA10 D6321ZOV141RA75 D6521ZOV141RA20 D6694ZOV141RA150
To Nominal Safety Size Agency Standards A B C D E F (mm) 3 X X X X 5 X X X X X X 7 X X 8 X X X X X X 10 X X X X X 11 X X X X X X 12 X X X X X X 14 X X 16 X X X X 18 X X X X X X 20 X X X X 25
D56ZOV151RA1R2 D58ZOV151RA02 D73ZOV151RA03 D68ZOV151RA03 D6121ZOV151RA04 D7121ZOV151RA05 D6221ZOV151RA07 D6921ZOV151RA09 D6421ZOV151RA10 D6321ZOV151RA80 D6521ZOV151RA20 D6694ZOV151RA160
X X X X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
Maximum Ratings Transient
Continuous
3 5 7 8 10 11 12 14 16 18 20 25
Minimum Marking
Energy Applied Voltage
Z141 Z141 - 02UL Z141 - 03UL Z141 - 03UL Z141 - 04UL Z141 - 05UL Z141 - 07UL Z141 - 09UL Z141 - 10UL Z141 - 75UL Z141 - 20UL Z141 - 150UL
(AC) 140 140 140 140 140 140 140 140 140 140 140 140
(DC) 180 180 180 180 180 180 180 180 180 180 180 180
10 x 1000 µ sec (J) 1.1 9 20 30 50 54 59 78 106 135 160 180
Z151 Z151 - 02UL Z151 - 03UL Z151 - 03UL Z151 - 04UL Z151 - 05UL Z151 - 07UL Z151 - 09UL Z151 - 10UL Z151 - 80UL Z151 - 20UL Z151 - 160UL
150 150 150 150 150 150 150 150 150 150 150 150
200 200 200 200 200 200 200 200 200 200 200 200
1.2 10.5 21 30 55 58 64 84 112 140 170 190
8 x 20 µ sec (J) 1.1 9 20 30 50 54 59 78 106 135 160 180 1.2 10.5 21 30 55 58 64 84 112 140 170 190
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 2400 1700 3500 2500 4000 2800 4500 3200 6500 5000 7700 6000 9000 7000 12000 9000 18000 13000 100 800 1750 2300 3500 4000 4500 6500 7700 9000 12000 18000
50 600 1250 1500 2500 2800 3200 5000 6000 7000 9000 13000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) (V) (V) (A) (pF) 198 242 380 2 33 198 242 380 5 111 198 242 360 10 232 198 242 360 15 293 198 242 360 25 407 198 242 360 30 458 198 242 360 40 775 198 242 360 50 825 198 242 360 70 1209 198 242 360 100 1457 198 242 360 100 1855 198 242 360 100 3370 212 212 212 212 212 212 212 212 212 212 212 212
259 259 259 259 259 259 259 259 259 259 259 259
430 430 395 395 395 395 395 395 395 395 395 395
2 5 10 15 25 30 40 50 70 100 100 100
NOTES: NOTES: A = UL1449 FileAE86730 Transient Voltage Surge and Suppression D =the VDE/CECC 42000/42201 & IEC 1051 Appendix lists the-single-pulse peak current energy ratings on file with Safety Agencies. B = UL1414 Filetransient E38785 -rating Across - The Line Applications E = those UL497B - Filein E180012 Maximum specified in this table are valid. They may differ from shown Appendix A. C = CSA File LR33458 F =D SEV - 96.7 70250.01 A = C22.2 UL1449 File E86730 - Transient Voltage Surge Suppression = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D68 D61 D71 D62 D69 D64 D63 D65 D66
H
D
Z
d
0.322 [8.18] 0.423 [10.74] 0.479 [12.17] 0.519 [13.18] 0.597 [15.16] 0.656 [16.66] 0.715 [18.16] 0.775 [19.69] 0.835 [21.21] 0.912 [23.16] 1.030 [26.16] 1.250 [31.75]
0.197 [5.00] 0.298 [7.57] 0.354 [8.99] 0.394 [10.00] 0.472 [11.99] 0.531 [13.49] 0.590 [14.99] 0.650 [16.51] 0.710 [18.03] 0.787 [19.99] 0.905 [22.99] 1.100 [27.94]
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.500 [12.7]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 140 VAC Y T 0.060 0.208 [1.52] [5.28] 0.065 0.208 [1.65] [5.28] 0.065 0.208 [1.65] [5.28] 0.065 0.208 [1.65] [5.28] 0.072 0.208 [1.83] [5.28] 0.072 0.208 [1.83] [5.28] 0.072 0.208 [1.83] [5.28] 0.072 0.208 [1.83] [5.28] 0.072 0.208 [1.83] [5.28] 0.072 0.208 [1.83] [5.28] 0.072 0.208 [1.83] [5.28] 0.080 0.202 [2.03] [5.14]
THICKNESS 150 VAC Y T 0.064 0.212 [1.63] [5.38] 0.069 0.212 [1.75] [5.38] 0.069 0.212 [1.75] [5.38] 0.069 0.212 [1.75] [5.38] 0.076 0.212 [1.93] [5.38] 0.076 0.212 [1.93] [5.38] 0.076 0.212 [1.93] [5.38] 0.076 0.212 [1.93] [5.38] 0.076 0.212 [1.93] [5.38] 0.076 0.212 [1.93] [5.38] 0.076 0.212 [1.93] [5.38] 0.084 0.207 [2.13] [5.26]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
8
30 101 212 268 373 420 710 756 1108 1336 1701 3089
STANDARD SERIES SPECIFICATIONS
180 and 210 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Nominal Size
A B C D E F D56ZOV181RA1R3 D58ZOV181RA02 D73ZOV181RA03 D68ZOV181RA03 D6121ZOV181RA04 D6221ZOV181RA07 D6921ZOV181RA09 D6321ZOV181RA100 D6521ZOV181RA20 D6694ZOV181RA200
X X X X X X X X X X X X X X X X
D56ZOV211RA1R5 D58ZOV211RA07 D73ZOV211RA18 D61ZOV211RA30 D62ZOV211RA45 D69ZOV211RA65 D63ZOV211RA100 D65ZOV211RA110 D6694ZOV211RA220
X X X X X X X X
X X X X X X X
X X X X X
X X X X X X X X X X X X X X X
X X X X X X
X X X X X X X
X X X X X X
X X X X X X X X
Maximum Ratings Transient
Continuous
X X X X X X
Minimum Marking
Applied Voltage
Energy
(mm) 3 5 7 8 10 12 14 18 20 25
Z181 Z181 - 02UL Z181 - 03UL Z181 - 03UL Z181 - 04UL Z181 - 07UL Z181 - 09UL Z181 - 100UL Z181 - 20UL Z181 - 200UL
(AC) 180 180 180 180 180 180 180 180 180 180
(DC) 230 230 230 230 230 230 230 230 230 230
10 x 1000 µ sec (J) 1.3 11 24 32 60 62 100 150 190 200
3 5 7 10 12 14 18 20 25
Z211 Z211 - 07UL Z211 - 18UL Z211 - 30UL Z211 - 45UL Z211 - 65UL Z211 - 75UL Z211 - 110UL Z211 - 220UL
210 210 210 210 210 210 210 210 210
270 270 270 270 270 270 270 270 270
1.5 13 28 58 66 120 185 230 250
8 x 20 µ sec (J) 1.3 11 24 32 60 62 100 150 190 200 1.5 13 28 58 66 120 185 230 250
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 2400 1700 3500 2500 4500 3200 6000 5000 7500 6000 10000 7000 13000 9000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) (V) (V) (A) (pF) 255 311 510 2 26 255 311 510 5 87 255 311 445 10 182 255 311 445 15 230 255 311 465 25 319 255 311 465 40 609 255 311 465 50 648 255 311 465 100 1145 255 311 465 100 1458 255 311 465 100 2648
100 800 1750 3500 4500 6000 7500 10000 13000
297 297 297 297 297 297 297 297 297
50 600 1250 2500 3200 4500 6000 6500 9000
363 363 363 363 363 363 363 363 363
570 545 545 545 545 545 545 545 545
2 5 10 25 40 50 75 100 100
22 74 154 271 516 550 971 1237 2247
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient ratings specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D68 D61 D62 D69 D63 D65 D66
H
D
Z
d
0.322 [8.18] 0.423 [10.74] 0.479 [12.17] 0.519 [13.18] 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.912 [23.16] 1.030 [26.16] 1.250 [31.75]
0.197 [5.00] 0.298 [7.57] 0.354 [8.99] 0.394 [10.00] 0.472 [11.99] 0.590 [14.99] 0.650 [16.51] 0.787 [19.99] 0.905 [22.99] 1.100 [27.94]
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.500 [12.7]
0.020 0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [1.02]
OFFSET AND 180 VAC Y T 0.069 0.223 [1.75] [5.66] 0.074 0.223 [1.88] [5.66] 0.074 0.223 [1.88] [5.66] 0.074 0.223 [1.88] [5.66] 0.081 0.223 [2.06] [5.66] 0.081 0.223 [2.06] [5.66] 0.081 0.223 [2.06] [5.66] 0.081 0.223 [2.06] [5.66] 0.081 0.223 [2.06] [5.66] 0.089 0.217 [2.26] [5.51]
THICKNESS 210 VAC Y T 0.080 0.220 [2.03] [5.59] 0.085 0.220 [2.16] [5.59] 0.085 0.236 [2.16] [5.99] N/A
N/A
0.092 [2.34] 0.092 [2.34] 0.091 [2.31] 0.091 [2.31] 0.091 [2.31] 0.099 [2.51]
0.237 [6.02] 0.234 [5.94] 0.239 [6.07] 0.234 [5.94] 0.234 [5.94] 0.234 [5.94]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
9
STANDARD SERIES SPECIFICATIONS 230 and 250 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous
A B C D E F D56ZOV231RA1R7 D58ZOV231RA08 D73ZOV231RA20 D68ZOV231RA20 D61ZOV231RA35 D62ZOV231RA50 D69ZOV231RA70 D63ZOV231RA80 D65ZOV231RA115 D6694ZOV231RA230
X X X X X X X X X X X X X X X X
X X X X X X X X
D56ZOV251RA1R9 D58ZOV251RA08 D73ZOV251RA21 D68ZOV251RA21 D61ZOV251RA40 D62ZOV251RA55 D69ZOV251RA72 D63ZOV251RA90 D65ZOV251RA130 D6694ZOV251RA260
X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X X X X X X X
X X X X X X
X X X X X
Nominal Size
Minimum Marking
(mm) 3 5 7 8 10 12 14 18 20 25
Z231 Z231-08UL Z231-20UL Z231 - 20UL Z231-35UL Z231-50UL Z231-70UL Z231-80UL Z231-115UL Z231-230UL
(AC) 230 230 230 230 230 230 230 230 230 230
(DC) 300 300 300 300 300 300 300 300 300 300
3 5 7 8 10 12 14 18 20 25
Z251 Z251-08UL Z251-21UL Z251 - 21UL Z251-40UL Z251-55UL Z251-72UL Z251-90UL Z251-130UL Z251-260UL
250 250 250 250 250 250 250 250 250 250
330 330 330 330 330 330 330 330 330 330
Applied Voltage
Maximum Ratings Transient
Energy 10 x 1000 8 x 20 µ sec µ sec (J) (J) 1.7 1.7 16 16 32 32 42 42 65 65 70 70 135 135 215 215 270 270 280 280 1.9 17 35 45 70 80 145 240 300 315
1.9 17 35 45 70 80 145 240 300 315
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 2400 1700 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000 100 800 1750 2400 3500 4500 6000 7500 10000 13000
50 600 1250 1700 2500 3200 4500 6000 6500 9000
Electrical Characteristics Max Varistor Clamping Typical Cap. Voltage Voltage @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) 397 (V) (A) (pF) 326 397 670 2 20 326 397 595 5 68 326 397 595 10 141 326 397 595 15 179 326 397 595 25 248 326 397 595 40 473 326 397 595 50 504 326 397 595 100 890 326 397 595 100 1134 326 397 595 100 2059 354 354 354 354 354 354 354 354 354 354
432 432 432 432 432 432 432 432 432 432
700 675 650 650 650 650 650 650 650 650
2 5 10 15 25 40 50 75 100 100
NOTES: NOTES: A = UL1449 FileAE86730 Transient Voltage Surge and Suppression VDE/CECC 42000/42201 & IEC 1051 Appendix lists the- single-pulse peak current energy ratings D on=file with the Safety Agencies. B = UL1414 File transient E38785 -rating Across - The Line Applications E differ = UL497B - File shown E180012 Maximum specified in this table are valid. They may from those in Appendix A. C = CSA File LR33458 70250.01 42000/42201 & IEC 1051 A = C22.2 UL1449 File E86730 - Transient Voltage Surge Suppression F = SEV - 96.7 D = VDE/CECC B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D68 D61 D62 D69 D63 D65 D66
H
D
Z
d
0.322 [8.18] 0.423 [10.7] 0.479 [12.17] 0.519 [13.18] 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
0.197 [5.0] 0.298 [7.57] 0.354 [8.99] 0.394 [10.00] 0.472 [11.99] 0.590 [14.99] 0.650 [16.51] 0.812 [20.62] 0.905 [22.99] 1.100 [27.94]
0.160 [4.06] 0.200 [5.08] 0.200 [5.08] 0.200 [5.08] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.300 [7.62] 0.500 [12.7]
0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [1.02]
OFFSET AND 230 VAC Y T 0.085 0.229 [2.16] [5.82] 0.090 0.229 [2.29] [5.82] 0.090 0.242 [2.29] [6.15] 0.090 0.242 [2.29] [6.15] 0.097 0.242 [2.46] [6.15] 0.097 0.242 [2.46] [6.15] 0.097 0.242 [2.46] [6.15] 0.097 0.242 [2.46] [6.15] 0.097 0.242 [2.46] [6.15] 0.105 0.230 [2.67] [5.84]
THICKNESS 250 VAC Y T 0.091 0.236 [2.31] [5.99] 0.096 0.236 [2.44] [5.99] 0.096 0.249 [1.52] [6.32] 0.096 0.249 [1.52] [6.32] 0.103 0.249 [2.62] [6.32] 0.103 0.249 [2.62] [6.32] 0.103 0.249 [2.62] [6.32] 0.103 0.249 [2.62] [6.32] 0.103 0.249 [2.62] [6.32] 0.111 0.237 [2.82] [6.02]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
10
18 62 131 165 229 437 465 822 1047 1901
STANDARD SERIES SPECIFICATIONS
270 and 300 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
A B C D E F D56ZOV271RA2R0 D58ZOV271RA09 D73ZOV271RA23 D68ZOV271RA23 D61ZOV271RA43 D62ZOV271RA60 D69ZOV271RA75 D63ZOV271RA100 D65ZOV271RA140 D6694ZOV271RA280
X X X X X X X X X X X X X X X X
X X X X X X X X
D56ZOV301RA2R2 D58ZOV301RA10 D73ZOV301RA25 D68ZOV301RA25 D61ZOV301RA45 D62ZOV301RA65 D69ZOV301RA80 D63ZOV301RA105 D65ZOV301RA150 D6694ZOV301RA300
X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X X X X X X X X X X X X
X X X X X X X X X
X X X X X X
X X X X X
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
(mm) 3 5 7 8 10 12 14 18 20 25
Z271 Z271 -09UL Z271 - 23UL Z271 - 23UL Z271 - 43UL Z271 - 60UL Z271 - 75UL Z271 - 100UL Z271 - 140UL Z271 - 280UL
(AC) 270 270 270 270 270 270 270 270 270 270
(DC) 360 360 360 360 360 360 360 360 360 360
10 x 1000 µ sec (J) 2 20 40 52 80 91 160 260 325 340
3 5 7 8 10 12 14 18 20 25
Z301 Z301 -10UL Z301 - 25UL Z301 - 25UL Z301 - 45UL Z301 - 65UL Z301 - 80UL Z301 - 105UL Z301 - 150UL Z301 - 300UL
300 300 300 300 300 300 300 300 300 300
390 390 390 390 390 390 390 390 390 390
2.2 21 42 55 85 105 175 280 350 360
8 x 20 µ sec (J) 2 20 40 52 80 91 160 260 325 340 2.2 21 42 55 85 105 175 280 350 360
Electrical Characteristics
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 2400 1700 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000 100 800 1750 2400 3500 4500 6000 7500 10000 13000
50 600 1250 1700 2500 3200 4500 6000 6500 9000
Varistor Voltage 1 mA DC Vmin (V) 382 382 382 382 382 382 382 382 382 382
Vmax (V) 466 466 466 466 466 466 466 466 466 466
425 425 425 425 425 425 425 425 425 425
518 518 518 518 518 518 518 518 518 518
Max Clamping Voltage (@Test Current) (8 x 20 µ sec) (V) (A) 740 2 740 5 710 10 710 15 710 25 710 40 710 50 710 75 710 100 710 100 860 810 790 790 790 790 790 790 790 790
2 5 10 15 25 40 50 75 100 100
Typical Cap. 1 V rms @1kHz (pF) 17 58 121 153 213 406 432 763 972 1765 15 52 108 137 190 363 386 682 869 1577
NOTES: NOTES: A = UL1449 File E86730 - Transient Voltage Surgeand Suppression D =the VDE/CECC 42000/42201 & IEC 1051 Appendix A lists the single-pulse peak current energy ratings on file with Safety Agencies. B = UL1414 Filetransient E38785rating - Across - The in Line E = those UL497B - FileinE180012 Maximum specified thisApplications table are valid. They may differ from shown Appendix A. C = CSA C22.2 File F =DSEV - 96.7 70250.01 A = UL1449 FileLR33458 E86730 - Transient Voltage Surge Suppression = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D68 D61 D62 D69 D63 D65 D66
H 0.322 [8.18] 0.423 [10.7] 0.479 [12.17] 0.519 [13.18] 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.197 0.160 [5.0] [4.06] 0.298 0.200 [7.57] [5.08] 0.354 0.200 [8.99] [5.08] 0.394 0.200 [10.00] [5.08] 0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 270 VAC Y T 0.098 0.245 [2.49] [6.22] 0.103 0.245 [2.62] [6.22] 0.103 0.257 [2.62] [6.53] 0.103 0.257 [2.62] [6.53] 0.110 0.257 [2.79] [6.53] 0.110 0.257 [2.79] [6.53] 0.110 0.257 [2.79] [6.53] 0.110 0.257 [2.79] [6.53] 0.110 0.257 [2.79] [6.53] 0.118 0.244 [3.00] [6.20]
THICKNESS 300 VAC Y T 0.105 0.255 [2.67] [6.48] 0.110 0.255 [2.79] [6.48] 0.110 0.268 [2.79] [6.81] 0.110 0.268 [2.79] [6.81] 0.117 0.268 [2.97] [6.81] 0.117 0.268 [2.97] [6.81] 0.117 0.268 [2.97] [6.81] 0.117 0.268 [2.97] [6.81] 0.149 0.268 [3.78] [6.81] 0.125 0.255 [3.18] [6.48]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
11
STANDARD SERIES SPECIFICATIONS
320 and 360 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
A B C D E F D56ZOV321RA2R4 D58ZOV321RA11 D73ZOV321RA27 D61ZOV321RA45 D62ZOV321RA70 D69ZOV321RA90 D63ZOV321RA110 D65ZOV321RA160 D6694ZOV321RA320
X X X X X X X X
D56ZOV361RA2R7 D58ZOV361RA12 D73ZOV361RA28 D61ZOV361RA45 D62ZOV361RA70 D69ZOV361RA85 D63ZOV361RA110 D65ZOV361RA160 D6694ZOV361RA320
X X X X X X X X
X X X X X X X
X X X X
X X X X X X X
X X X X X X X X X
X X X X X X X X
X X X X X
X X X X X
X X X X X X X X
X X X X X
X X X X X
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
(mm) 3 5 7 10 12 14 18 20 25
Z321 Z321 - 11UL Z321 - 27UL Z321 - 45UL Z321 - 70UL Z321 - 90UL Z321 - 110UL Z321 - 160UL Z321 - 320UL
(AC) 320 320 320 320 320 320 320 320 320
(DC) 420 420 420 420 420 420 420 420 420
10 x 1000 µ sec (J) 2.4 21 46 92 140 190 310 385 430
3 5 7 10 12 14 18 20 25
Z361 Z361 - 12UL Z361 - 28UL Z361 - 45UL Z361 - 70UL Z361 - 85UL Z361 - 110UL Z361 - 160UL Z361 - 320UL
360 360 360 360 360 360 360 360 360
470 470 470 470 470 470 470 470 470
2.7 22 47 97 145 205 320 410 440
8 x 20 µ sec (J) 2.4 21 46 92 140 190 310 385 430 2.7 22 47 97 145 205 320 410 440
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000
Electrical Characteristics Max Varistor Clamping Typical Cap. Voltage Voltage @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) (V) (V) (A) (pF) 453 553 860 2 14 453 553 850 5 49 453 553 850 10 102 453 553 850 25 179 453 553 850 40 341 453 553 850 50 363 453 553 850 75 641 453 553 850 100 816 453 553 850 100 1483
100 800 1750 3500 4500 6000 7500 10000 13000
522 522 522 522 522 522 522 522 522
50 600 1250 2500 3200 4500 6000 6500 9000
638 638 638 638 638 638 638 638 638
1020 960 960 960 960 960 960 960 960
2 5 10 25 40 50 75 100 100
NOTES: NOTES: A = UL1449 FileAE86730 Transient Voltage Surge and Suppression D =the VDE/CECC 42000/42201 & IEC 1051 Appendix lists the-single-pulse peak current energy ratings on file with Safety Agencies. B = UL1414 File transient E38785 -rating Across - The Line Applications E = those UL497B - FileinE180012 Maximum specified in this table are valid. They may differ from shown Appendix A. C = CSA File LR33468 F =D SEV - 96.7 70250.01 A = C22.2 UL1449 File E86730 - Transient Voltage Surge Suppression = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions: Inches [mm] Size code D56 D58 D73 D61 D62 D69 D63 D65 D66
H 0.322 [8.18] 0.423 [10.7] 0.479 [12.17] 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.197 0.160 [5.0] [4.06] 0.298 0.200 [7.57] [5.08] 0.354 0.200 [8.99] [5.08] 0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 320 VAC Y T 0.114 0.264 [2.90] [6.71] 0.119 0.264 [3.02] [6.71] 0.114 0.272 [2.90] [6.91] 0.153 0.276 [3.89] [7.01] 0.153 0.276 [3.89] [7.01] 0.153 0.276 [3.89] [7.01] 0.153 0.276 [3.89] [7.01] 0.153 0.276 [3.89] [7.01] 0.161 0.267 [4.09] [6.78]
THICKNESS 360 VAC Y T 0.122 0.272 [3.10] [6.91] 0.127 0.272 [3.22] [6.91] 0.127 0.285 [3.22] [7.24] 0.161 0.281 [4.09] [7.14] 0.163 0.286 [4.14] [7.14] 0.202 0.281 [5.13] [7.14] 0.153 0.276 [3.89] [7.01] 0.159 0.281 [4.04] [7.14] 0.169 0.275 [4.29] [6.99]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
12
12 42 88 154 294 313 553 704 1278
STANDARD SERIES SPECIFICATIONS
390 and 420 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
A B C D E F D56ZOV391RA2R9 D58ZOV391RA13 D73ZOV391RA29 D61ZOV391RA45 D62ZOV391RA70 D69ZOV391RA85 D63ZOV391RA110 D65ZOV391RA150 D6694ZOV391RA320
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
D56ZOV421RA3R2 D58ZOV421RA14 D73ZOV421RA30 D61ZOV421RA45 D62ZOV421RA70 D69ZOV421RA90 D63ZOV421RA110 D65ZOV421RA160 D6694ZOV421RA320
X X X X X X X X
X X X X X X X
X X X X X X X
X X X X X
X X X X X X X X
X X X X X
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
(mm) 3 5 7 10 12 14 18 20 25
Z391 Z391 - 13UL Z391-29UL Z391-45UL Z391-70UL Z391-85UL Z391-110UL Z391-150UL Z391-320UL
(AC) 390 390 390 390 390 390 390 390 390
(DC) 500 500 500 505 500 505 500 505 505
10 x 1000 µ sec (J) 2.9 25 51 107 150 215 330 420 460
3 5 7 10 12 14 18 20 25
Z421 Z421 - 14UL Z421-30UL Z421-45UL Z421-70UL Z421-90UL Z421-110UL Z421-160UL Z421-320UL
420 420 420 420 420 420 420 420 420
560 560 560 560 560 560 560 560 560
3.2 26 57 110 156 225 340 430 480
8 x 20 µ sec (J) 2.9 25 51 107 150 215 330 420 460 3.2 26 57 110 156 225 340 430 480
Electrical Characteristics
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 100 50 800 600 1750 1250 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000 100 800 1750 3500 4500 6000 7500 10000 13000
50 600 1250 2500 3200 4500 6000 6500 9000
Varistor Voltage @1 mA DC Vmin (V) 552 552 552 552 552 552 552 552 552
Vmax (V) 674 674 674 674 674 674 674 674 674
594 594 594 594 594 594 594 594 594
725 725 725 725 725 725 725 725 725
Max Clamping Voltage (@Test Current) (8 x 20µ sec) (V) (A) 1090 2 1040 5 1040 10 1025 25 1025 40 1025 50 1025 75 1025 100 1025 100 1140 1130 1120 1120 1120 1120 1120 1120 1120
2 5 10 25 40 50 75 100 100
Typical Cap. 1 V rms @1kHz (pF) 12 40 83 146 278 297 524 667 1211 11 37 77 136 258 275 486 618 1123
NOTES: NOTES: A = UL1449 FileAE86730 Transient Voltage Surge Suppression D = VDE/CECC Appendix lists the- single-pulse peak current and energy ratings on file with the Safety Agencies. 42000/42201 & IEC 1051 B = UL1414 File transient E38785 -rating Across - The Line Applications = UL497B - File E180012 Maximum specified in this table are valid. They may differ from thoseE shown in Appendix A. C = CSA FileFile LR33458 F = SEV - 42000/42201 96.7 70250.01 A =C22.2 UL1449 E86730 - Transient Voltage Surge Suppression D = VDE/CECC & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D73 D61 D62 D69 D63 D65 D66
H 0.322 [8.18] 0.423 [10.7] 0.479 [12.17] 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.197 0.160 [5.0] [4.06] 0.298 0.200 [7.57] [5.08] 0.354 0.200 [8.99] [5.08] 0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 390 VAC Y T 0.125 0.275 [3.18] [6.99] 0.130 0.275 [3.30] [6.99] 0.130 0.290 [3.30] [7.37] 0.167 0.291 [4.24] [7.39] 0.167 0.290 [4.24] [7.37] 0.167 0.291 [4.24] [7.37] 0.153 0.276 [3.89] [7.01] 0.167 0.291 [4.24] [7.37] 0.175 0.291 [4.45] [7.37]
THICKNESS 420 VAC Y T 0.133 0.313 [3.38] [7.95] 0.138 0.313 [3.50] [7.95] 0.138 0.296 [3.50] [7.52] 0.177 0.313 [4.50] [7.95] 0.177 0.313 [4.50] [7.95] 0.177 0.313 [4.50] [7.95] 0.177 0.313 [4.50] [7.95] 0.177 0.313 [4.50] [7.95] 0.185 0.282 [4.70] [7.16]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
13
STANDARD SERIES SPECIFICATIONS
460 and 480 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
A B C D E F D58ZOV461RA17 D61ZOV461RA50 D62ZOV461RA75 D69ZOV461RA100 D63ZOV461RA120 D65ZOV461RA175 D6694ZOV461RA340
X X X X X X
X X X X X X
X X X X X X
X X X X X
X X X X X X
X X X X X
D56ZOV481RA3R6 D61ZOV481RA50 D62ZOV481RA80 D69ZOV481RA105 D63ZOV481RA130 D65ZOV481RA180 D6694ZOV481RA360
X X X X X X
X X X X X X
X X X X X X
X X X X X
X X X X X X
X X X X X
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
(mm) 5 10 12 14 18 20 25
Z461 - 17 Z461-50UL Z461-75UL Z461-100UL Z461-120UL Z461-175UL Z461-340UL
(AC) 460 460 460 460 460 460 460
(DC) 615 615 615 615 615 615 615
10 x 1000 µ sec (J) 25 115 162 230 360 450 500
3 10 12 14 18 20 25
Z481 Z481-50UL Z481-80UL Z481-105UL Z481-130UL Z481-180UL Z481-360UL
480 480 480 480 480 480 480
640 640 640 640 640 640 640
3.6 120 167 235 365 460 510
8 x 20 µ sec (J) 25 115 162 230 360 450 500 3.6 120 167 235 365 460 510
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 800 600 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000 100 3500 4500 6000 7500 10000 13000
50 2500 3200 4500 6000 6500 9000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20 µ sec) (V) (V) (V) (A) (pF) 651 795 1240 5 34 651 795 1240 25 124 651 795 1240 40 236 651 795 1240 50 251 651 795 1240 75 443 651 795 1240 100 565 651 795 1240 100 1025 679 679 679 679 679 679 679
829 829 829 829 829 829 829
1370 1300 1300 1300 1300 1300 1300
2 25 40 50 75 100 100
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D56 D58 D61 D62 D69 D63 D65 D66
H 0.322 [8.18] 0.423 [10.7] 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.197 0.160 [5.0] [4.06] 0.298 0.200 [7.57] [5.08] 0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.020 [0.51] 0.025 [0.64] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [1.02]
OFFSET AND THICKNESS 460 480 VAC VAC Y T Y T 0.150 0.329 N/A N/A [3.81] [8.36] 0.150 0.313 N/A N/A [3.81] [7.95] 0.189 0.322 0.194 0.329 [4.80] [8.18] [4.93] [8.36] 0.188 0.324 0.194 0.336 [4.78] [8.23] [4.93] [8.53] 0.189 0.322 0.194 0.336 [4.80] [8.18] [4.93] [8.53] 0.188 0.324 0.194 0.336 [4.78] [8.23] [4.93] [8.53] 0.189 0.322 0.194 0.336 [4.80] [8.18] [4.93] [8.53] 0.197 0.322 0.202 0.300 [5.00] [8.18] [5.13] [7.62]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
14
10 119 227 242 427 544 989
STANDARD SERIES SPECIFICATIONS
510 and 550 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
D61ZOV511RA55 D62ZOV511RA85 D69ZOV511RA110 D63ZOV511RA140 D65ZOV511RA190 D6694ZOV511RA380
A X X X X X X
B X X X X X X
C X X X X X X
D X X X X X
E X X X X X X
F X X X X X
(mm) 10 12 14 18 20 25
D61ZOV551RA60 D62ZOV551RA90 D69ZOV551RA115 D63ZOV551RA145 D65ZOV551RA200 D6694ZOV551RA400
X X X X X X
X X X X X X
X X X X X X
X X X X X
X X X X X X
X X X X X
10 12 14 18 20 25
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
Z511-55UL Z511-85UL Z511-110UL Z511-140UL Z511-190UL Z511-380UL
(AC) 510 510 510 510 510 510
(DC) 675 675 675 675 675 675
10 x 1000 µ sec (J) 125 172 240 375 470 525
Z551-60UL Z551-90UL Z551-115UL Z551-145UL Z551-200UL Z551-400UL
550 550 550 550 550 550
700 700 700 700 700 700
130 192 255 405 510 540
8 x 20 µ sec (J) 125 172 240 375 470 525 130 192 255 405 510 540
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000 3500 4500 6000 7500 10000 13000
2500 3200 4500 6000 6500 9000
Electrical Characteristics Max Clamping Typical Cap. Voltage (@Test Current) 1 V rms Vmax (8 x 20µs) @1kHz (V) (V) (A) (pF) 881 1350 25 112 881 1350 40 213 881 1350 50 227 881 1350 75 401 881 1350 100 510 881 1350 100 927
Varistor Voltage @1 mA DC Vmin (V) 722 722 722 722 722 722 778 778 778 778 778 778
950 950 950 950 950 950
1400 1400 1400 1400 1400 1400
25 40 50 75 100 100
104 198 211 373 475 862
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D61 D62 D69 D63 D65 D66
H 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 510 VAC Y T 0.201 0.347 [5.11] [8.81] 0.201 0.347 [5.11] [8.81] 0.201 0.347 [5.11] [8.81] 0.201 0.347 [5.11] [8.81] 0.201 0.347 [5.11] [8.81] 0.209 0.310 [5.31] [7.87]
THICKNESS 550 VAC Y T 0.216 0.362 [5.49] [9.19] 0.216 0.362 [5.49] [9.19] 0.216 0.362 [5.49] [9.19] 0.216 0.362 [5.49] [9.19] 0.216 0.362 [5.49] [9.19] 0.224 0.323 [5.69] [8.20]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
15
STANDARD SERIES SPECIFICATIONS
580 and 620 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
Continuous Nominal Size
D61ZOV581RA65 D62ZOV581RA95 D69ZOV581RA120 D63ZOV581RA160 D65ZOV581RA220 D6694ZOV581RA440
A X X X X X X
B X X X X X
C X X X X X X
D E F X X X X X X X X X X
D61ZOV621RA65 D62ZOV621RA100 D69ZOV621RA130 D63ZOV621RA170 D65ZOV621RA230 D6694ZOV621RA460
X X X X X X
X X X X X X
X X X X X X
X X X X X
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
(mm) 10 12 14 18 20 25
Z581 - 65UL Z581 - 95UL Z581 - 120UL Z581 - 160UL Z581 - 220UL Z581 - 440UL
(AC) 580 580 580 580 580 580
(DC) 735 735 735 735 735 735
10 x 1000 µ sec (J) 140 202 265 425 530 560
10 12 14 18 20 25
Z621 - 65UL Z621 - 100UL Z621 - 130UL Z621 - 170UL Z621 - 230UL Z621 - 460UL
620 620 620 620 620 620
800 800 800 800 800 800
145 215 290 450 565 600
X X X X X
8 x 20 µ sec (J) 140 202 265 425 530 560 145 215 290 450 565 600
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000 3500 4500 6000 7500 10000 13000
2500 3200 4500 6000 6500 9000
Electrical Characteristics Max Varistor Clamping Typical Cap. Voltage Voltage @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20µ sec) (V) (V) (V) (A) (pF) 821 1002 1500 25 98 821 1002 1500 40 187 821 1002 1500 50 199 821 1002 1500 75 352 821 1002 1500 100 449 821 1002 1500 100 815 877 877 877 877 877 877
1071 1071 1071 1071 1071 1071
1650 1650 1650 1650 1650 1650
25 40 50 75 100 100
NOTES: NOTES: A = UL1449 FileA E86730 Transient Voltage Surge and Suppression D = Agencies. VDE/CECC 42000/42201 & IEC 1051 Appendix lists the -single-pulse peak current energy ratings on file with the Safety B = UL1414 Filetransient E38785 rating - Across - The Line Applications = UL497B - File E180012 Maximum specified in this table are valid. They may differ from thoseEshown in Appendix A. C = CSA File LR33458 F = SEV -42000/42201 96.7 70250.01 A = C22.2 UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D61 D62 D69 D63 D65 D66
H 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [1.02]
OFFSET AND 580 VAC Y T 0.224 0.373 [5.69] [9.47] 0.224 0.373 [5.69] [9.47] 0.224 0.373 [5.69] [9.47] 0.224 0.373 [5.69] [9.47] 0.224 0.373 [5.69] [9.47] 0.232 0.332 [5.89] [8.43]
THICKNESS 620 VAC Y T 0.302 0.381 [7.67] [9.68] 0.231 0.385 [5.87] [9.78] 0.231 0.388 [5.87] [9.86] 0.231 0.388 [5.87] [9.86] 0.231 0.388 [5.87] [9.86] 0.239 0.345 [6.07] [8.76]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
16
92 175 186 329 419 761
STANDARD SERIES SPECIFICATIONS
680 and 750 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
D61ZOV681RA70 D62ZOV681RA105 D69ZOV681RA150 D63ZOV681RA200 D65ZOV681RA260 D6694ZOV681RA520
A X X X X X X
B X X X
C X X X X X X X
D69ZOV751RA165 D63ZOV751RA220 D65ZOV751RA290 D6694ZOV751RA560
X X X X X
Continuous Nominal Size
D E F X X X X X X X X X X
X X X X X X X
X X X
(mm) 10 12 14 18 20 25 14 18 20 25
Minimum Marking
Maximum Ratings Transient
Applied Voltage
Energy
Z681 - 70UL Z681 - 105UL Z681 - 150UL Z681 - 200UL Z681 - 260UL Z681 - 520UL
(AC) 680 680 680 680 680 680
(DC) 860 860 860 860 860 860
10 x 1000 µ sec (J) 155 232 310 500 620 655
Z751 Z751 Z751 Z751
750 750 750 750
900 900 900 900
350 540 670 700
-
165UL 220UL 290UL 560UL
8 x 20 µ sec (J) 155 232 310 500 620 655 350 540 670 700
Electrical Characteristics
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 3500 2500 4500 3200 6000 4500 7500 6000 10000 6500 13000 9000
Vmin (V) 962 962 962 962 962 962
Vmax (V) 1175 1175 1175 1175 1175 1175
(8 x 20 µ sec) (V) (A) 1800 25 1800 40 1800 50 1800 75 1800 100 1800 100
6000 7500 10000 13000
1062 1062 1062 1062
1300 1300 1300 1300
2100 2100 2100 2100
4500 6000 6500 9000
Varistor Voltage @1 mA DC
Max Clamping Voltage (@Test Current)
50 75 100 100
Typical Cap. 1 V rms @1kHz (pF) 84 160 170 300 382 694 151 267 340 618
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient ratings specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] Size code D61 D62 D69 D63 D65 D66
H 0.597 [15.16] 0.715 [18.16] 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.472 0.300 [11.99] [7.62] 0.590 0.300 [14.99] [7.62] 0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
d 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [10.2]
OFFSET AND 680 VAC Y T 0.247 0.405 [6.27] [10.29] 0.247 0.411 [6.27] [10.44] 0.247 0.411 [6.27] [10.44] 0.247 0.411 [6.27] [10.44] 0.247 0.411 [6.27] [10.44] 0.255 0.369 [6.48] [9.37]
THICKNESS 750 VAC Y T N/A
N/A
N/A
N/A
0.247 [6.27] 0.266 [6.76] 0.247 [5.46] 0.312 [7.92]
0.411 [10.44] 0.437 [11.10] 0.411 [10.44] 0.325 [8.26]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
17
STANDARD SERIES SPECIFICATIONS
1000 VAC Varistors 1000 VAC Varistors Recognitions To Safety Agency Standards
Maida Style Number
D69ZOV102RA220 D63ZOV102RA280 D65ZOV102RA360 D6694ZOV102RA720
A X X X X
B X X X X
C X X X X
D E F X X X X X X
Continuous Nominal Size
(mm) 14 18 20 25
Minimum Marking
Applied Voltage
Z102-220UL Z102-280UL Z102-360UL Z102-720UL
(AC) 1000 1000 1000 1000
(DC) 1200 1200 1200 1200
Maximum Ratings Tranisent Energy 10 x 1000 µ sec (J) 510 690 860 875
8 x 20 µ sec (J) 510 690 860 875
Peak Current 8 x 20 µ sec # Pulses 1 2 (A) (A) 6000 4500 7500 6000 10000 6500 13000 9000
Electrical Characteristics Max Varistor Clamping Typical Voltage Voltage Cap. @1 mA DC (@Test Current) 1 V rms Vmin Vmax @1kHz (8 x 20µ sec) (V) (V) (V) (A) (pF) 1414 1728 2700 50 115 1414 1728 2700 75 204 1414 1728 2700 100 259 1414 1728 2700 100 471
NOTES: Appendix A lists the single-pulse peak current and energy ratings on file with the Safety Agencies. Maximum transient rating specified in this table are valid. They may differ from those shown in Appendix A. A = UL1449 File E86730 - Transient Voltage Surge Suppression D = VDE/CECC 42000/42201 & IEC 1051 B = UL1414 File E38785 - Across - The Line Applications E = UL497B - File E180012 C = CSA C22.2 File LR33468 F = SEV - 96.7 70250.01
Standard Dimensions: Inches (mm) Standard Dimensions : Inches [mm] OFFSET AND THICKNESS
Size code D69 D63 D65 D66
H 0.775 [19.69] 0.937 [23.80] 1.030 [26.16] 1.250 [31.75]
D
Z
0.650 0.300 [16.51] [7.62] 0.812 0.300 [20.62] [7.62] 0.905 0.300 [22.99] [7.62] 1.100 0.500 [27.94] [12.70]
1000 VAC
d 0.032 [0.81] 0.032 [0.81] 0.032 [0.81] 0.040 [1.02]
Y 0.364 [9.25] 0.364 [9.25] 0.364 [9.25] 0.372 [9.45]
T 0.531 [13.49] 0.531 [13.49] 0.531 [13.49] 0.435 [11.05]
Detailed Voltage vs. Current characteristic curves for each component are available from our engineering department.
18
STANDARD SERIES LEAD CODES
19
STANDARD SERIES LEAD CODES
20
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
DISK d *LEAD **Y +/"X" +/- 0.040" Resultant THICK LEAD OFFSET 0.030" for Nominal "Z" Lead NOM. DIA. (each lead) 0.160 0.197 0.296 20 0.033 0.025 0.058 0.149 0.188 0.290 25 0.039 0.025 0.064 0.147 0.186 0.289 30 0.043 0.025 0.068 0.145 0.185 0.288 35 0.056 0.025 0.081 0.138 0.180 0.285 40 0.028 0.025 0.053 0.151 0.190 0.291 50 0.020 0.025 0.045 0.154 0.192 0.293 60 0.024 0.025 0.049 0.152 0.191 0.292 75 0.028 0.025 0.053 0.151 0.190 0.291 95 0.031 0.025 0.056 0.150 0.189 0.291 120 0.031 0.025 0.056 0.150 0.189 0.291 130 0.031 0.025 0.056 0.150 0.189 0.291 140 0.033 0.025 0.058 0.149 0.188 0.290 150 0.036 0.025 0.061 0.148 0.187 0.290 180 0.042 0.025 0.067 0.145 0.185 0.288 210 0.050 0.025 0.075 0.141 0.182 0.286 230 0.054 0.025 0.079 0.139 0.180 0.285 250 0.059 0.025 0.084 0.136 0.178 0.284 270 0.063 0.025 0.088 0.134 0.176 0.283 300 0.071 0.025 0.096 0.128 0.172 0.280 320 0.075 0.025 0.016 0.100 0.125 0.170 0.279 360 0.087 0.025 0.016 0.112 0.114 0.162 0.274 390 0.092 0.025 0.016 0.117 0.109 0.158 0.272 420 0.099 0.025 0.016 0.124 0.101 0.153 0.269 460 0.109 0.025 0.016 0.134 0.087 0.144 0.264 480 0.113 0.025 0.016 0.138 0.081 0.141 0.262 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, and lead offset. *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
Dimension Spacing 0.394 0.492 0.390 0.489 0.389 0.454 0.388 0.455 0.386 0.457 0.390 0.453 0.391 0.452 0.391 0.452 0.390 0.453 0.390 0.453 0.390 0.453 0.390 0.453 0.390 0.453 0.389 0.454 0.388 0.454 0.387 0.456 0.386 0.456 0.385 0.457 0.384 0.458 0.382 0.460 0.381 0.461 0.378 0.463 0.376 0.464 0.374 0.466 0.371 0.469 0.369 0.470 No Code 7 H MAX. H MAX. 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322 0.322
10 H MAX. 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397 0.397
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322 0.397 0.397 0.322 0.322
3mm Zinc Oxide Varistor Dimensions 94 H MAX.
D3 H MAX.
D7 H MAX.
***T MAX. 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.272 0.275 0.313 0.313 0.329
D MAX. 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197 0.197
STANDARD SERIES MECHANICAL DIMENSIONS
21
22
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.290 0.289 0.288 0.286 0.291 0.293 0.292 0.291 0.291 0.291 0.291 0.290 0.290 0.288 0.286 0.285 0.284 0.283 0.280 0.265 0.259 0.256 0.252 0.242
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.188 0.186 0.185 0.182 0.189 0.192 0.191 0.189 0.189 0.189 0.189 0.188 0.187 0.185 0.182 0.180 0.178 0.176 0.172 0.146 0.134 0.129 0.120 0.100
0.390 0.389 0.388 0.387 0.390 0.391 0.391 0.390 0.390 0.390 0.390 0.390 0.389 0.388 0.387 0.386 0.385 0.384 0.382 0.371 0.367 0.365 0.362 0.355
0.489 0.488 0.487 0.486 0.489 0.490 0.489 0.489 0.489 0.489 0.489 0.489 0.488 0.487 0.486 0.486 0.485 0.484 0.483 0.474 0.470 0.469 0.467 0.462
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.197 0.296 0.394 0.492
0.160
20 0.033 0.025 0.058 0.149 25 0.039 0.025 0.064 0.147 30 0.043 0.025 0.068 0.145 35 0.051 0.025 0.076 0.141 40 0.030 0.025 0.055 0.150 50 0.020 0.025 0.045 0.154 60 0.025 0.025 0.050 0.152 75 0.031 0.025 0.056 0.150 95 0.031 0.025 0.056 0.150 120 0.031 0.025 0.056 0.150 130 0.031 0.025 0.056 0.150 140 0.033 0.025 0.058 0.149 150 0.036 0.025 0.061 0.148 180 0.042 0.025 0.067 0.145 210 0.050 0.025 0.075 0.141 230 0.054 0.025 0.079 0.139 250 0.059 0.025 0.084 0.136 270 0.063 0.025 0.088 0.134 300 0.071 0.025 0.096 0.128 320 0.075 0.025 0.016 0.132 360 0.087 0.025 0.016 0.144 390 0.092 0.025 0.016 0.149 420 0.099 0.025 0.016 0.156 480 0.113 0.025 0.016 0.170 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423
0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423
No Code 7 H MAX. H MAX. 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498
10 H MAX. 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498
0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498 0.498
0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423
0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423 0.423
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
5mm Zinc Oxide Varistor Dimensions 94 H MAX.
D3 H MAX.
D7 H MAX.
0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298 0.298
D MAX.
0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.272 0.275 0.313 0.329
***T MAX.
STANDARD SERIES
MECHANICAL DIMENSIONS
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.288 0.285 0.281 0.290 0.289 0.288 0.286 0.291 0.293 0.292 0.291 0.291 0.291 0.291 0.290 0.290 0.288 0.286 0.285 0.284 0.283 0.280 0.265 0.263 0.261 0.259 0.257 0.256 0.252 0.252 0.245 0.242 0.237 0.230 0.224 0.219
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.184 0.180 0.174 0.188 0.186 0.185 0.182 0.189 0.192 0.191 0.189 0.189 0.189 0.189 0.188 0.187 0.185 0.182 0.180 0.178 0.176 0.172 0.146 0.143 0.139 0.134 0.132 0.129 0.122 0.120 0.106 0.100
0.388 0.386 0.383 0.390 0.389 0.388 0.387 0.390 0.391 0.391 0.390 0.390 0.390 0.390 0.390 0.389 0.388 0.387 0.386 0.385 0.384 0.382 0.371 0.370 0.368 0.367 0.366 0.365 0.362 0.362 0.357 0.355 0.352 0.347 0.343 0.340
0.487 0.485 0.483 0.489 0.488 0.487 0.486 0.489 0.490 0.489 0.489 0.489 0.489 0.489 0.489 0.488 0.487 0.486 0.486 0.485 0.484 0.483 0.474 0.473 0.472 0.470 0.470 0.469 0.467 0.467 0.463 0.462 0.459 0.455 0.452 0.450
0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479
0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479
No Code 7 H MAX. H MAX. 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554
10 H MAX. 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554
0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554 0.554
0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479
0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479 0.479
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
7mm Zinc Oxide Varistor Dimensions "X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.197 0.296 0.394 0.492
0.160
11 0.045 0.025 0.070 0.144 14 0.055 0.025 0.080 0.139 17 0.068 0.025 0.093 0.130 20 0.033 0.025 0.058 0.149 25 0.039 0.025 0.064 0.147 30 0.043 0.025 0.068 0.145 35 0.051 0.025 0.076 0.141 40 0.030 0.025 0.055 0.150 50 0.020 0.025 0.045 0.154 60 0.025 0.025 0.050 0.152 75 0.031 0.025 0.056 0.150 95 0.031 0.025 0.056 0.150 120 0.031 0.025 0.056 0.150 130 0.031 0.025 0.056 0.150 140 0.033 0.025 0.058 0.149 150 0.036 0.025 0.061 0.148 180 0.042 0.025 0.067 0.145 210 0.050 0.025 0.075 0.141 230 0.054 0.025 0.079 0.139 250 0.059 0.025 0.084 0.136 270 0.063 0.025 0.088 0.134 300 0.071 0.025 0.096 0.128 320 0.075 0.025 0.016 0.132 330 0.078 0.025 0.016 0.135 350 0.083 0.025 0.016 0.140 360 0.087 0.025 0.016 0.144 370 0.089 0.025 0.016 0.146 390 0.092 0.025 0.016 0.149 400 0.098 0.025 0.016 0.155 420 0.099 0.025 0.016 0.156 460 0.109 0.025 0.016 0.166 480 0.113 0.025 0.016 0.170 510 0.120 0.025 0.016 0.177 550 0.129 0.025 0.016 0.186 580 0.137 0.025 0.016 0.194 600 0.142 0.025 0.016 0.199 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
7MM ZINC OXIDE VARISTOR DIMENSIONS 94 H MAX.
D3 H MAX.
D7 H MAX.
0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354 0.354
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385
***T MAX.
STANDARD SERIES MECHANICAL DIMENSIONS
23
24
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.286 0.283 0.279 0.289 0.287 0.286 0.284 0.289 0.291 0.290 0.289 0.289 0.289 0.289 0.289 0.288 0.287 0.284 0.283 0.282 0.280 0.278 0.261 0.260 0.257 0.255 0.253 0.252 0.248 0.247 0.240 0.237 0.232 0.224 0.217 0.213 0.209 0.192
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.181 0.177 0.170 0.186 0.184 0.182 0.179 0.186 0.190 0.189 0.187 0.187 0.187 0.187 0.186 0.185 0.183 0.179 0.177 0.175 0.173 0.168 0.140 0.137 0.131 0.127 0.124 0.120 0.112 0.111
0.386 0.384 0.381 0.389 0.388 0.387 0.385 0.389 0.391 0.390 0.389 0.389 0.389 0.389 0.389 0.388 0.387 0.385 0.384 0.383 0.382 0.380 0.369 0.368 0.366 0.364 0.363 0.362 0.359 0.359 0.354 0.352 0.348 0.343 0.339 0.336 0.333 0.323
0.486 0.484 0.482 0.488 0.487 0.486 0.485 0.488 0.489 0.489 0.488 0.488 0.488 0.488 0.488 0.487 0.486 0.485 0.484 0.484 0.483 0.481 0.472 0.471 0.470 0.468 0.468 0.467 0.465 0.464 0.461 0.459 0.456 0.453 0.449 0.447 0.445 0.438
"X" +/- 0.040" Resultant Dimensions for Nominal "Z" Lead Spacing 0.197 0.296 0.394 0.492
0.160
11 0.045 0.032 0.077 0.140 14 0.055 0.032 0.087 0.134 17 0.068 0.032 0.100 0.125 20 0.033 0.032 0.065 0.146 25 0.039 0.032 0.071 0.143 30 0.043 0.032 0.075 0.141 35 0.051 0.032 0.083 0.137 40 0.032 0.032 0.064 0.147 50 0.020 0.032 0.052 0.151 60 0.025 0.032 0.057 0.150 75 0.031 0.032 0.063 0.147 95 0.031 0.032 0.063 0.147 120 0.031 0.032 0.063 0.147 130 0.031 0.032 0.063 0.147 140 0.033 0.032 0.065 0.146 150 0.036 0.032 0.068 0.145 180 0.042 0.032 0.074 0.142 210 0.050 0.032 0.082 0.137 230 0.054 0.032 0.086 0.135 250 0.059 0.032 0.091 0.132 270 0.063 0.032 0.095 0.129 300 0.071 0.032 0.103 0.122 320 0.075 0.032 0.016 0.139 330 0.078 0.032 0.016 0.142 350 0.083 0.032 0.016 0.147 360 0.087 0.032 0.016 0.151 370 0.089 0.032 0.016 0.153 390 0.092 0.032 0.016 0.156 400 0.098 0.032 0.016 0.162 420 0.099 0.032 0.016 0.163 460 0.109 0.032 0.016 0.173 480 0.113 0.032 0.016 0.177 510 0.120 0.032 0.016 0.184 550 0.129 0.032 0.016 0.193 580 0.137 0.032 0.016 0.201 600 0.142 0.032 0.016 0.206 620 0.146 0.032 0.016 0.210 680 0.161 0.032 0.016 0.225 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
No Code 7 H MAX. H MAX. 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672
10 H MAX. 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672
0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672 0.672
0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
10mm Zinc Oxide Varistor Dimensions 94 H MAX. 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597 0.597
D3 H MAX.
D7 H MAX.
0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472 0.472
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411
***T MAX.
STANDARD SERIES
MECHANICAL DIMENSIONS
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.286 0.283 0.279 0.289 0.287 0.285 0.283 0.289 0.291 0.290 0.289 0.289 0.289 0.289 0.288 0.287
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.181 0.177 0.170 0.186 0.184 0.180 0.176 0.186 0.189 0.188 0.186 0.187 0.187 0.186 0.185 0.183
0.386 0.384 0.381 0.389 0.388 0.386 0.384 0.389 0.390 0.390 0.389 0.389 0.389 0.389 0.388 0.387
0.486 0.484 0.482 0.488 0.487 0.486 0.484 0.488 0.489 0.488 0.488 0.488 0.488 0.488 0.487 0.487
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
No Code 7 H MAX. H MAX. 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731
10 H MAX. 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731 0.731
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
11mm Zinc Oxide Varistor Dimensions "X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.160 0.197 0.296 0.394 0.492
11 0.045 0.032 0.077 0.140 14 0.055 0.032 0.087 0.134 17 0.068 0.032 0.100 0.125 20 0.033 0.032 0.065 0.146 25 0.039 0.032 0.071 0.143 30 0.047 0.032 0.079 0.139 35 0.056 0.032 0.088 0.134 40 0.032 0.032 0.064 0.147 50 0.022 0.032 0.054 0.151 60 0.027 0.032 0.059 0.149 75 0.032 0.032 0.064 0.147 95 0.031 0.032 0.063 0.147 120 0.031 0.032 0.063 0.147 130 0.033 0.032 0.065 0.146 140 0.036 0.032 0.068 0.145 150 0.040 0.032 0.072 0.143 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
94 H MAX.
0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656 0.656
D3 H MAX.
D7 H MAX.
0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531 0.531
D MAX. 0.531
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212
***T MAX.
STANDARD SERIES MECHANICAL DIMENSIONS
25
26
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.286 0.283 0.279 0.289 0.287 0.285 0.283 0.289 0.291 0.290 0.289 0.289 0.289 0.289 0.288 0.287 0.285 0.283 0.281 0.279 0.278 0.274 0.256 0.255 0.252 0.248 0.247 0.244 0.240 0.239 0.230 0.227 0.220 0.210 0.201 0.196 0.189 0.169
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.181 0.177 0.170 0.186 0.184 0.180 0.176 0.186 0.189 0.188 0.186 0.187 0.187 0.186 0.185 0.183 0.180 0.177 0.174 0.171 0.168 0.163 0.130 0.127 0.120 0.114 0.111 0.104
0.386 0.384 0.381 0.389 0.388 0.386 0.384 0.389 0.390 0.390 0.389 0.389 0.389 0.388 0.388 0.387 0.386 0.384 0.383 0.382 0.380 0.378 0.365 0.364 0.362 0.360 0.359 0.357 0.354 0.353 0.347 0.345 0.341 0.334 0.329 0.326 0.321 0.310
0.486 0.484 0.482 0.488 0.487 0.486 0.484 0.488 0.489 0.488 0.488 0.488 0.488 0.488 0.487 0.487 0.486 0.484 0.483 0.482 0.481 0.479 0.469 0.468 0.467 0.465 0.464 0.463 0.461 0.460 0.455 0.454 0.450 0.445 0.442 0.439 0.436 0.428
0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
No Code 7 H MAX. H MAX. 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790
10 H MAX. 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790
0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790 0.790
0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
12mm Zinc Oxide Varistor Dimensions "X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.160 0.197 0.296 0.394 0.492
11 0.045 0.032 0.077 0.140 14 0.055 0.032 0.087 0.134 17 0.068 0.032 0.100 0.125 20 0.033 0.032 0.065 0.146 25 0.039 0.032 0.071 0.143 30 0.047 0.032 0.079 0.139 35 0.056 0.032 0.088 0.134 40 0.032 0.032 0.064 0.147 50 0.022 0.032 0.054 0.151 60 0.027 0.032 0.059 0.149 75 0.033 0.032 0.065 0.146 95 0.031 0.032 0.063 0.147 120 0.031 0.032 0.063 0.147 130 0.034 0.032 0.066 0.146 140 0.037 0.032 0.069 0.144 150 0.040 0.032 0.072 0.143 180 0.047 0.032 0.079 0.139 210 0.055 0.032 0.087 0.134 230 0.061 0.032 0.093 0.130 250 0.066 0.032 0.098 0.126 270 0.071 0.032 0.103 0.122 300 0.079 0.032 0.111 0.115 320 0.084 0.032 0.016 0.148 330 0.087 0.032 0.016 0.151 350 0.092 0.032 0.016 0.156 360 0.097 0.032 0.016 0.161 370 0.099 0.032 0.016 0.163 390 0.103 0.032 0.016 0.167 400 0.109 0.032 0.016 0.173 420 0.111 0.032 0.016 0.175 460 0.122 0.032 0.016 0.186 480 0.126 0.032 0.016 0.190 510 0.134 0.032 0.016 0.198 550 0.145 0.032 0.016 0.209 580 0.153 0.032 0.016 0.217 600 0.158 0.032 0.016 0.222 620 0.164 0.032 0.016 0.228 680 0.179 0.032 0.016 0.243 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC 94 H MAX. 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715 0.715
D3 H MAX.
D7 H MAX.
0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590 0.590
D MAX. H MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411
***T MAX.
STANDARD SERIES
MECHANICAL DIMENSIONS
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.288 0.285 0.281 0.290 0.289 0.287 0.285 0.290 0.292 0.291 0.290 0.291 0.291 0.290 0.289 0.288 0.287 0.284 0.283 0.281 0.279 0.276 0.259 0.257 0.253 0.250 0.250 0.247 0.242 0.241 0.233 0.229 0.222 0.212 0.203 0.197 0.191 0.169 0.130
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.184 0.180 0.174 0.188 0.186 0.183 0.180 0.188 0.191 0.190 0.188 0.189 0.189 0.188 0.187 0.185 0.183 0.179 0.176 0.174 0.171 0.165 0.134 0.131 0.124 0.118 0.116 0.111 0.100
0.388 0.386 0.383 0.390 0.389 0.387 0.386 0.390 0.391 0.390 0.390 0.390 0.390 0.389 0.389 0.388 0.387 0.385 0.384 0.383 0.382 0.379 0.367 0.366 0.363 0.361 0.360 0.359 0.355 0.354 0.349 0.347 0.342 0.335 0.330 0.326 0.323 0.310 0.291 0.259 0.214
0.487 0.485 0.483 0.489 0.488 0.487 0.485 0.488 0.490 0.489 0.489 0.489 0.489 0.488 0.488 0.487 0.486 0.485 0.484 0.483 0.482 0.480 0.470 0.470 0.468 0.466 0.466 0.464 0.462 0.461 0.457 0.455 0.451 0.446 0.443 0.440 0.437 0.428 0.414 0.392 0.364 0.269
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.197 0.296 0.394 0.492
0.160
11 0.045 0.025 0.070 0.144 14 0.055 0.025 0.080 0.139 17 0.068 0.025 0.093 0.130 20 0.033 0.025 0.058 0.149 25 0.039 0.025 0.064 0.147 30 0.047 0.025 0.072 0.143 35 0.056 0.025 0.081 0.138 40 0.034 0.025 0.059 0.149 50 0.023 0.025 0.048 0.153 60 0.028 0.025 0.053 0.151 75 0.033 0.025 0.058 0.149 95 0.031 0.025 0.056 0.150 120 0.031 0.025 0.056 0.150 130 0.035 0.025 0.060 0.148 140 0.038 0.025 0.063 0.147 150 0.042 0.025 0.067 0.145 180 0.049 0.025 0.074 0.142 210 0.057 0.025 0.082 0.137 230 0.063 0.025 0.088 0.134 250 0.068 0.025 0.093 0.130 270 0.073 0.025 0.098 0.126 300 0.082 0.025 0.107 0.119 320 0.087 0.025 0.016 0.144 330 0.090 0.025 0.016 0.147 350 0.096 0.025 0.016 0.153 360 0.101 0.025 0.016 0.158 370 0.102 0.025 0.016 0.159 390 0.106 0.025 0.016 0.163 400 0.113 0.025 0.016 0.170 420 0.115 0.025 0.016 0.172 460 0.126 0.025 0.016 0.183 480 0.130 0.025 0.016 0.187 510 0.139 0.025 0.016 0.196 550 0.150 0.025 0.016 0.207 580 0.158 0.025 0.016 0.215 600 0.164 0.025 0.016 0.221 620 0.169 0.025 0.016 0.226 680 0.186 0.025 0.016 0.243 750 0.209 0.025 0.016 0.266 880 0.240 0.025 0.016 0.297 1000 0.274 0.025 0.016 0.331 1200 0.355 0.025 0.016 0.412 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
No Code 7 H MAX. H MAX. 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850
10 H MAX. 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850 0.850
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
14mm Zinc Oxide Varistor Dimensions
0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
94 H MAX. 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
D3 H MAX. 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775 0.775
D7 H MAX.
0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411 0.437 0.476 0.531 0.550
***T MAX.
STANDARD SERIES MECHANICAL DIMENSIONS
27
28
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.286 0.283 0.279 0.289 0.287 0.285 0.283 0.289 0.291 0.290 0.289 0.289 0.289 0.288 0.287 0.287 0.284 0.282 0.280 0.278 0.276 0.273 0.254 0.252 0.248 0.244 0.244 0.241 0.236 0.234 0.225 0.221 0.213 0.202 0.192 0.185 0.179 0.154 0.107
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.181 0.177 0.170 0.186 0.184 0.180 0.176 0.186 0.189 0.188 0.186 0.187 0.187 0.185 0.184 0.183 0.179 0.175 0.172 0.169 0.166 0.160 0.125 0.120 0.114 0.104 0.103
0.386 0.384 0.381 0.389 0.388 0.386 0.384 0.388 0.390 0.389 0.388 0.389 0.389 0.388 0.388 0.387 0.385 0.384 0.382 0.381 0.379 0.377 0.363 0.362 0.360 0.357 0.356 0.354 0.351 0.350 0.344 0.341 0.336 0.330 0.323 0.319 0.315 0.302 0.281 0.246 0.194
0.486 0.484 0.482 0.488 0.487 0.486 0.484 0.488 0.489 0.488 0.488 0.488 0.488 0.487 0.487 0.486 0.485 0.484 0.483 0.482 0.480 0.478 0.468 0.467 0.465 0.463 0.462 0.461 0.458 0.457 0.453 0.451 0.447 0.442 0.438 0.434 0.432 0.422 0.407 0.384 0.353 0.248
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.160 0.197 0.296 0.394 0.492
)
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
No Code 7 H MAX. H MAX. 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012
10 H MAX. 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
18mm Zinc Oxide Varistor Dimensions (20 AWG Wire Only)
11 0.045 0.032 0.077 0.140 14 0.055 0.032 0.087 0.134 17 0.068 0.032 0.100 0.125 20 0.033 0.032 0.065 0.146 25 0.039 0.032 0.071 0.143 30 0.047 0.032 0.079 0.139 35 0.056 0.032 0.088 0.134 40 0.034 0.032 0.066 0.146 50 0.023 0.032 0.055 0.150 60 0.028 0.032 0.060 0.148 75 0.034 0.032 0.066 0.146 95 0.031 0.032 0.063 0.147 120 0.031 0.032 0.063 0.147 130 0.035 0.032 0.067 0.145 140 0.039 0.032 0.071 0.143 150 0.042 0.032 0.074 0.142 180 0.050 0.032 0.082 0.137 210 0.058 0.032 0.090 0.132 230 0.064 0.032 0.096 0.128 250 0.069 0.032 0.101 0.124 270 0.074 0.032 0.106 0.120 300 0.083 0.032 0.115 0.111 320 0.088 0.032 0.016 0.152 330 0.092 0.032 0.016 0.156 350 0.097 0.032 0.016 0.161 360 0.103 0.032 0.016 0.167 370 0.104 0.032 0.016 0.168 390 0.108 0.032 0.016 0.172 400 0.115 0.032 0.016 0.179 420 0.117 0.032 0.016 0.181 460 0.128 0.032 0.016 0.192 480 0.133 0.032 0.016 0.197 510 0.142 0.032 0.016 0.206 550 0.152 0.032 0.016 0.216 580 0.161 0.032 0.016 0.225 600 0.167 0.032 0.016 0.231 620 0.172 0.032 0.016 0.236 680 0.189 0.032 0.016 0.253 750 0.212 0.032 0.016 0.276 880 0.244 0.032 0.016 0.308 1000 0.279 0.032 0.016 0.343 1200 0.361 0.032 0.016 0.425 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
(
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
94 H MAX. 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
D3 H MAX. 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
D7 H MAX.
0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411 0.437 0.476 0.531 0.550
***T MAX.
STANDARD SERIES
MECHANICAL DIMENSIONS
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.284 0.280 0.276 0.287 0.285 0.283 0.280 0.287 0.289 0.288 0.287 0.287 0.287 0.286 0.285 0.284 0.282 0.279 0.277 0.275 0.273 0.269 0.249 0.246 0.243 0.239 0.238 0.235 0.229 0.228 0.218 0.214 0.204 0.193 0.183 0.175 0.168 0.140
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.178 0.173 0.165 0.183 0.180 0.177 0.172 0.183 0.187 0.185 0.183 0.184 0.184 0.182 0.180 0.179 0.175 0.171 0.167 0.164 0.161 0.154 0.115 0.109 0.101
0.385 0.382 0.379 0.387 0.386 0.384 0.382 0.387 0.389 0.388 0.387 0.388 0.388 0.387 0.386 0.385 0.384 0.382 0.380 0.379 0.377 0.374 0.360 0.358 0.356 0.353 0.353 0.350 0.347 0.346 0.339 0.336 0.331 0.324 0.318 0.313 0.309 0.295 0.273 0.235 0.179
0.485 0.483 0.480 0.487 0.486 0.484 0.483 0.486 0.488 0.487 0.486 0.487 0.487 0.486 0.486 0.485 0.484 0.482 0.481 0.480 0.479 0.476 0.465 0.464 0.462 0.460 0.459 0.458 0.455 0.454 0.450 0.447 0.443 0.438 0.433 0.430 0.427 0.417 0.402 0.377 0.345 0.234
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.197 0.296 0.394 0.492
0.160
11 0.045 0.040 0.085 0.136 14 0.055 0.040 0.095 0.129 17 0.068 0.040 0.108 0.118 20 0.033 0.040 0.073 0.142 25 0.039 0.040 0.079 0.139 30 0.047 0.040 0.087 0.134 35 0.056 0.040 0.096 0.128 40 0.034 0.040 0.074 0.142 50 0.023 0.040 0.063 0.147 60 0.028 0.040 0.068 0.145 75 0.034 0.040 0.074 0.142 95 0.031 0.040 0.071 0.143 120 0.031 0.040 0.071 0.143 130 0.035 0.040 0.075 0.141 140 0.039 0.040 0.079 0.139 150 0.042 0.040 0.082 0.137 180 0.050 0.040 0.090 0.132 210 0.058 0.040 0.098 0.126 230 0.064 0.040 0.104 0.122 250 0.069 0.040 0.109 0.117 270 0.074 0.040 0.114 0.112 300 0.083 0.040 0.123 0.102 320 0.088 0.040 0.016 0.160 330 0.092 0.040 0.016 0.164 350 0.097 0.040 0.016 0.169 360 0.103 0.040 0.016 0.175 370 0.104 0.040 0.016 0.176 390 0.108 0.040 0.016 0.180 400 0.115 0.040 0.016 0.187 420 0.117 0.040 0.016 0.189 460 0.128 0.040 0.016 0.200 480 0.133 0.040 0.016 0.205 510 0.142 0.040 0.016 0.214 550 0.152 0.040 0.016 0.224 580 0.161 0.040 0.016 0.233 600 0.167 0.040 0.016 0.239 620 0.172 0.040 0.016 0.244 680 0.189 0.040 0.016 0.261 750 0.212 0.040 0.016 0.284 880 0.244 0.040 0.016 0.316 1000 0.279 0.040 0.016 0.351 1200 0.361 0.040 0.016 0.433 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
No Code 7 H MAX. H MAX. 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012
10 H MAX. 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012 1.012
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
18mm Zinc Oxide Varistor Dimensions (18 AWG Wire Only)
0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
94 H MAX. 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
D3 H MAX. 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937 0.937
D7 H MAX.
0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812 0.812
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411 0.437 0.476 0.531 0.550
***T MAX.
STANDARD SERIES MECHANICAL DIMENSIONS
29
30
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
)
0.286 0.283 0.279 0.289 0.287 0.285 0.283 0.289 0.291 0.290 0.289 0.289 0.289 0.288 0.287 0.287 0.284 0.282 0.280 0.278 0.276 0.273 0.254 0.252 0.248 0.244 0.244 0.241 0.236 0.234 0.225 0.221 0.213 0.202 0.192 0.185 0.179 0.154 0.107
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.181 0.177 0.170 0.186 0.184 0.180 0.176 0.186 0.189 0.188 0.186 0.187 0.187 0.185 0.184 0.183 0.179 0.175 0.172 0.169 0.166 0.160 0.125 0.120 0.114 0.104 0.103
0.386 0.384 0.381 0.389 0.388 0.386 0.384 0.388 0.390 0.389 0.388 0.389 0.389 0.388 0.388 0.387 0.385 0.384 0.382 0.381 0.379 0.377 0.363 0.362 0.360 0.357 0.356 0.354 0.351 0.350 0.344 0.341 0.336 0.330 0.323 0.319 0.315 0.302 0.281 0.246 0.194
0.486 0.484 0.482 0.488 0.487 0.486 0.484 0.488 0.489 0.488 0.488 0.488 0.488 0.487 0.487 0.486 0.485 0.484 0.483 0.482 0.480 0.478 0.468 0.467 0.465 0.463 0.462 0.461 0.458 0.457 0.453 0.451 0.447 0.442 0.438 0.434 0.432 0.422 0.407 0.384 0.353 0.248
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
No Code 7 H MAX. H MAX. 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105
10 H MAX. 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
20mm Zinc Oxide Varistor Dimensions (20 AWG Wire Only)
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.160 0.197 0.296 0.394 0.492
11 0.045 0.032 0.077 0.140 14 0.055 0.032 0.087 0.134 17 0.068 0.032 0.100 0.125 20 0.033 0.032 0.065 0.146 25 0.039 0.032 0.071 0.143 30 0.047 0.032 0.079 0.139 35 0.056 0.032 0.088 0.134 40 0.034 0.032 0.066 0.146 50 0.023 0.032 0.055 0.150 60 0.028 0.032 0.060 0.148 75 0.034 0.032 0.066 0.146 95 0.031 0.032 0.063 0.147 120 0.031 0.032 0.063 0.147 130 0.035 0.032 0.067 0.145 140 0.039 0.032 0.071 0.143 150 0.042 0.032 0.074 0.142 180 0.050 0.032 0.082 0.137 210 0.058 0.032 0.090 0.132 230 0.064 0.032 0.096 0.128 250 0.069 0.032 0.101 0.124 270 0.074 0.032 0.106 0.120 300 0.083 0.032 0.115 0.111 320 0.088 0.032 0.016 0.152 330 0.092 0.032 0.016 0.156 350 0.097 0.032 0.016 0.161 360 0.103 0.032 0.016 0.167 370 0.104 0.032 0.016 0.168 390 0.108 0.032 0.016 0.172 400 0.115 0.032 0.016 0.179 420 0.117 0.032 0.016 0.181 460 0.128 0.032 0.016 0.192 480 0.133 0.032 0.016 0.197 510 0.142 0.032 0.016 0.206 550 0.152 0.032 0.016 0.216 580 0.161 0.032 0.016 0.225 600 0.167 0.032 0.016 0.231 620 0.172 0.032 0.016 0.236 680 0.189 0.032 0.016 0.253 750 0.212 0.032 0.016 0.276 880 0.244 0.032 0.016 0.308 1000 0.279 0.032 0.016 0.343 1200 0.361 0.032 0.016 0.425 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
(
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
94 H MAX. 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
D3 H MAX. 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
D7 H MAX.
0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411 0.437 0.476 0.531 0.550
***T MAX.
STANDARD SERIES
MECHANICAL DIMENSIONS
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.284 0.280 0.276 0.287 0.285 0.283 0.280 0.287 0.289 0.288 0.287 0.287 0.287 0.286 0.285 0.284 0.282 0.279 0.277 0.275 0.273 0.269 0.249 0.246 0.243 0.239 0.238 0.235 0.229 0.228 0.218 0.214 0.204 0.193 0.183 0.175 0.168 0.140
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.178 0.173 0.165 0.183 0.180 0.177 0.172 0.183 0.187 0.185 0.183 0.184 0.184 0.182 0.180 0.179 0.175 0.171 0.167 0.164 0.161 0.154 0.115 0.109 0.101
0.385 0.382 0.379 0.387 0.386 0.384 0.382 0.387 0.389 0.388 0.387 0.388 0.388 0.387 0.386 0.385 0.384 0.382 0.380 0.379 0.377 0.374 0.360 0.358 0.356 0.353 0.353 0.350 0.347 0.346 0.339 0.336 0.331 0.324 0.318 0.313 0.309 0.295 0.273 0.235 0.179
0.485 0.483 0.480 0.487 0.486 0.484 0.483 0.486 0.488 0.487 0.486 0.487 0.487 0.486 0.486 0.485 0.484 0.482 0.481 0.480 0.479 0.476 0.465 0.464 0.462 0.460 0.459 0.458 0.455 0.454 0.450 0.447 0.443 0.438 0.433 0.430 0.427 0.417 0.402 0.377 0.345 0.234
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.160 0.197 0.296 0.394 0.492
)
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
No Code 7 H MAX. H MAX. 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105
10 H MAX. 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105 1.105
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
20mm Zinc Oxide Varistor Dimensions (18 AWG Wire Only)
11 0.045 0.040 0.085 0.136 14 0.055 0.040 0.095 0.129 17 0.068 0.040 0.108 0.118 20 0.033 0.040 0.073 0.142 25 0.039 0.040 0.079 0.139 30 0.047 0.040 0.087 0.134 35 0.056 0.040 0.096 0.128 40 0.034 0.040 0.074 0.142 50 0.023 0.040 0.063 0.147 60 0.028 0.040 0.068 0.145 75 0.034 0.040 0.074 0.142 95 0.031 0.040 0.071 0.143 120 0.031 0.040 0.071 0.143 130 0.035 0.040 0.075 0.141 140 0.039 0.040 0.079 0.139 150 0.042 0.040 0.082 0.137 180 0.050 0.040 0.090 0.132 210 0.058 0.040 0.098 0.126 230 0.064 0.040 0.104 0.122 250 0.069 0.040 0.109 0.117 270 0.074 0.040 0.114 0.112 300 0.083 0.040 0.123 0.102 320 0.088 0.040 0.016 0.160 330 0.092 0.040 0.016 0.164 350 0.097 0.040 0.016 0.169 360 0.103 0.040 0.016 0.175 370 0.104 0.040 0.016 0.176 390 0.108 0.040 0.016 0.180 400 0.115 0.040 0.016 0.187 420 0.117 0.040 0.016 0.189 460 0.128 0.040 0.016 0.200 480 0.133 0.040 0.016 0.205 510 0.142 0.040 0.016 0.214 550 0.152 0.040 0.016 0.224 580 0.161 0.040 0.016 0.233 600 0.167 0.040 0.016 0.239 620 0.172 0.040 0.016 0.244 680 0.189 0.040 0.016 0.261 750 0.212 0.040 0.016 0.284 880 0.244 0.040 0.016 0.316 1000 0.279 0.040 0.016 0.351 1200 0.361 0.040 0.016 0.433 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
(
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
94 H MAX. 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
D3 H MAX.
1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030 1.030
D7 H MAX.
0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905 0.905
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411 0.437 0.476 0.531 0.550
***T MAX.
STANDARD SERIES MECHANICAL DIMENSIONS
31
32
DISK THICK NOM.
d LEAD DIA.
*LEAD OFFSET (each lead)
**Y +/0.030"
0.293 0.293 0.293 0.293 0.293 0.293 0.293 0.287 0.289 0.288 0.287 0.287 0.287 0.286 0.285 0.284 0.282 0.279 0.277 0.275 0.273 0.269 0.252 0.246 0.243 0.239 0.238 0.235 0.229 0.228 0.218 0.214 0.204 0.193 0.183 0.175 0.168 0.140
NOTE: ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED.
and lead offset.
0.193 0.193 0.193 0.193 0.193 0.193 0.193 0.183 0.187 0.185 0.183 0.184 0.184 0.182 0.180 0.179 0.175 0.171 0.167 0.164 0.161 0.154 0.122 0.109 0.101
0.392 0.392 0.392 0.392 0.392 0.392 0.392 0.387 0.389 0.388 0.387 0.388 0.388 0.387 0.386 0.385 0.384 0.382 0.380 0.379 0.377 0.374 0.362 0.358 0.356 0.353 0.353 0.350 0.347 0.346 0.339 0.336 0.331 0.324 0.318 0.313 0.309 0.295 0.273 0.235 0.179
0.490 0.490 0.490 0.490 0.490 0.490 0.490 0.486 0.488 0.487 0.486 0.487 0.487 0.486 0.486 0.485 0.484 0.482 0.481 0.480 0.479 0.476 0.467 0.464 0.462 0.460 0.459 0.458 0.455 0.454 0.450 0.447 0.443 0.438 0.433 0.430 0.427 0.417 0.402 0.377 0.345 0.234
"X" +/- 0.040" Resultant Dimension for Nominal "Z" Lead Spacing 0.197 0.296 0.394 0.492
0.160
11 0.040 0.040 0.155 14 0.040 0.040 0.155 17 0.040 0.040 0.155 20 0.040 0.040 0.155 25 0.040 0.040 0.155 30 0.040 0.040 0.155 35 0.040 0.040 0.155 40 0.034 0.040 0.074 0.142 50 0.023 0.040 0.063 0.147 60 0.028 0.040 0.068 0.145 75 0.034 0.040 0.074 0.142 95 0.031 0.040 0.071 0.143 120 0.031 0.040 0.071 0.143 130 0.035 0.040 0.075 0.141 140 0.039 0.040 0.079 0.139 150 0.042 0.040 0.082 0.137 180 0.050 0.040 0.090 0.132 210 0.058 0.040 0.098 0.126 230 0.064 0.040 0.104 0.122 250 0.069 0.040 0.109 0.117 270 0.074 0.040 0.114 0.112 300 0.083 0.040 0.123 0.102 320 0.083 0.040 0.016 0.155 330 0.092 0.040 0.016 0.164 350 0.097 0.040 0.016 0.169 360 0.103 0.040 0.016 0.175 370 0.104 0.040 0.016 0.176 390 0.108 0.040 0.016 0.180 400 0.115 0.040 0.016 0.187 420 0.117 0.040 0.016 0.189 460 0.128 0.040 0.016 0.200 480 0.133 0.040 0.016 0.205 510 0.142 0.040 0.016 0.214 550 0.152 0.040 0.016 0.224 580 0.161 0.040 0.016 0.233 600 0.167 0.040 0.016 0.239 620 0.172 0.040 0.016 0.244 680 0.189 0.040 0.016 0.261 750 0.212 0.040 0.016 0.284 880 0.244 0.040 0.016 0.316 1000 0.279 0.040 0.016 0.351 1200 0.361 0.040 0.016 0.433 * Lead stepped away from disk at lead egress. ** Lead displacement including disk thickness, wire diameter, *** Includes disk, wire, coating, and lead offset (if indicated).
VOLTS AC
1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225
1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225
No Code 7 H MAX. H MAX. 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300
10 H MAX. 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300
1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300
1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300 1.300
1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225
1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225
HEIGHT DIMENSIONS FOR AVAILABLE LEAD CODES 11 20 21 23 44 58 93 H MAX. H MAX. H MAX. H MAX. H MAX. H MAX. H MAX.
25mm Zinc Oxide Varistor Dimensions
1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225
94 H MAX.
D3 H MAX. 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225 1.225
D7 H MAX.
1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100 1.100
D MAX.
0.161 0.165 0.170 0.176 0.182 0.190 0.199 0.211 0.174 0.243 0.184 0.191 0.201 0.204 0.208 0.212 0.223 0.220 0.229 0.236 0.245 0.255 0.264 0.275 0.283 0.272 0.287 0.275 0.298 0.313 0.313 0.329 0.347 0.362 0.373 0.385 0.398 0.411 0.437 0.476 0.531 0.550
***T MAX.
STANDARD SERIES
MECHANICAL DIMENSIONS
Related Documents c2h70
Varistor Mdc Z151 09ul 58635m
December 2021 0
Varistor-catalog.pdf 2p2444
August 2022 0
Varistor Datasheet.pdf 6py5u
March 2023 0
Varistor 241kd14 4w643f
August 2022 0
Varistor 275l40 5l386h
August 2022 0
Varistor Dsa2ih005192 2pb2y
March 2023 0More Documents from "Rosendo Vidal" 4e2t39
Bluetooth Remote Control V4 2q2i6t
June 2022 0
Bateria Lw650c 3fm4 1v3y2u
November 2019 31
Varistor Mdc Z151 09ul 58635m
December 2021 0
6g3p1u
September 2021 0
6g3p1u
December 2019 86