Tai Lieu Moi 3z3731

TM

Brief Product Descriptions

Imperial Oil Downstream and Chemical 237 Fourth Avenue SW, Calgary, Alberta T2P 3M9

2015 Edition – Canada

For more information: 1- 888-968-3776


mobil.ca mobildelvac.ca mobilindustrial.com All trademarks used herein are trademarks or ed trademarks of Exxon Mobil Corporation or one of its subsidiaries.


TM

TM

TM

TM

TM

TM

TM

TM

TM

TM

Brief Product Descriptions 2015 Edition

237 Fourth Avenue SW, Calgary, Alberta T2P 3M9 For additional information please call our Technical Centre at 1 888 968-3776 or visit mobil.ca Due to ongoing product research and development, the information herein is subject to change without notification. Please refer to our Product Data Sheets found at mobil.ca/pds for the most current product information.

2

INTRODUCTION This book is provided as a field reference to our core product offer of lubricating oils, greases and coolants. The format is designed to help you choose precisely the right product for each application. The content is divided into six sections: Industrial Commercial Vehicle enger Vehicle Marine Aviation Grease Within each section, products are divided into application groups. An alphabetical list of applications is provided up front and an alphabetical index of products is located at the end. An appendix provides additional information.

Typical Properties are typical of those obtained with normal product tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations. All products may NOT be available locally. For additional information please call our Technical Centre at 1 888 968-3776 or visit mobil.ca.

Due to continual product development, these contents are subject to change without notification. Please refer to our Product Data Sheets found at mobil.ca/pds for the most current product information.

1

Visit mobil.ca /pds for the most current product information

The Ultimate Lubrication Warranty Imperial will repair or replace any piece of your equipment damaged due to the failure of our lubricant.

All our lubricants meet or exceed original equipment manufacturers’ standards. We guarantee their performance when used in accordance with Imperial’s recommendations, the equipment manufacturers’ performance specifications, and under normal operating conditions. This warranty is in addition to any and all original equipment manufacturers’ warranties and does not invalidate them. Because we are 100% committed to you, we stand behind our lubricants 100%.

See next page for complete warranty and conditions. For further information on the Imperial Ultimate Lubrication Warranty or any Mobil lubricant call Imperial at 1 888 968-3776.

TM

TM

TM

TM

TM

TM

TM

TM

TM

All trademarks used herein are trademarks or ed trademarks of Exxon Mobil Corporation or one of its subsidiaries. Limitation of liability: in no event shall Imperial Oil be liable for any incidental, indirect, special, exemplary, punitive or consequential damages, including loss of profits.

2

Pegasus Pegasus Pegasus

The Ultimate Lubrication Warranty and Conditions What the Warranty Covers

What the Warranty Does Not Cover

Imperial provides this warranty to direct purchasers of Mobil™ lubricants, where such lubricants have been purchased from an authorized vendor. This warranty covers the Mobil product and critical equipment parts lubricated by that product directly damaged by a defect or malfunction of the lubricant. Imperial warrants that its lubricants are free from defects and that the lubricant you purchased will protect your equipment parts from oil related failure for three years, provided that:

This warranty excludes: • Mobil lubricants used in mechanically deficient equipment, where the deficiency results from, but is not limited to: a previously existing condition, abnormal operation; negligence; abuse; damage from casualty, shipment or accident; or equipment modification done without written authorization from the OEM.

• The equipment was in good operating condition at the time the lubricant was installed;

• Mobil lubricants used in equipment where the OEM required lubricant standards do not match those stated by Imperial, without prior written approval from Imperial.

• The lubricant was selected and maintained in accordance with specifications of the original equipment manufacturer (“OEM”), and the written recommendations (which include product packaging) provided by Imperial at the time of sale; and

• Mobil lubricants and/or equipment pieces that have been used in conjunction with any other product or additive that has not been authorized for use by Imperial.

• The equipment has been operated within the limits specified by the OEM. Be advised that if your equipment is covered by a manufacturer’s warranty, you should follow the equipment’s oil life sensor and the oil change interval recommended in your owner’s manual to avoid a disruption in the manufacturer’s warranty. Follow your owner’s manual if the equipment is operated in any of the following severe services: racing or commercial applications including taxis, limousines, etc.; frequent towing or hauling; extremely dusty or dirty conditions; or under excessive idling conditions.

What the Period of Coverage Is The Ultimate Lubrication Warranty is valid for three (3) years from the date of purchase or installation, whichever comes first.

What We Will Do to Correct Problems Imperial will replace any lubricant that is defective. In addition, Imperial will repair any equipment damage directly caused by a defect or malfunction of the lubricant, at no cost to you, provided that the lubricant was selected and maintained in accordance with specifications of the OEM and the written instructions (which includes product packaging) provided by Imperial. These are your exclusive remedies for any claim for defective lubricant.

3

• Failure of equipment due to non-lubricant related conditions, such as normal wear.

How You Can Get Service To file a claim under this warranty, you must: 1. Within 48 hours from discovery of the damage (and not later than six (6) months from the date the damage occurred), call 1-888-968-3776 to communicate the issue, and initiate a claims investigation. You may also your Imperial or local Distributor representative.* 2. Provide proof of purchase and maintenance records showing that the equipment was serviced at the intervals recommended by the OEM. 3. Allow an Imperial representative to examine the equipment to determine the extent of the damage and to confirm that the lubricant was the cause. 4. Allow an Imperial representative to obtain an oil sample, if available, from the engine for oil analysis at no cost to you to assist in determining the cause of the equipment failure.

TABLE OF CONTENTS Introduction........................................................................................................................ 1 Ultimate Lubrication Warranty.......................................................................................2-3 Health and Safety Precautions......................................................................................5-7 Sustainability..................................................................................................................... 8 Energy Efficiency............................................................................................................... 9 Application Index of Products................................................................................... 10-11 Mobil SHC™ General Recommendations..................................................................... 12

Brief Product Descriptions...................................................................................... 14-104

Appendices............................................................................................................. 105-109 Temperature Conversion Table................................................................................. 105-106 Viscosity Conversion Table.............................................................................................. 107 Viscosity - Temperature Chart......................................................................................... 108 SAE Viscosity Grades for Engine Oils............................................................................. 109 SAE J306 Viscosity Grades for Gear Oils....................................................................... 109 Classification of Greases by National Lubricating Grease Institute (NLGI) Consistency Numbers.......................................................................................... 109 Understanding Oil Analysis...............................................................................................110 ANSI-AGMA Industrial Gear Lubricants 9005-D94.......................................................... 111

Alphabetical List of Products................................................................................. 112-116

Viscosity Classification Equivalents............................................................................117

QUESTIONS? CALL OUR TECHNICAL CENTER AT

1 888 968-3776 mobilindustrial.com | mobildelvac.ca | mobil.ca


4

HEALTH AND SAFETY PRECAUTIONS Workplace Hazardous Materials Information System (WHMIS) The Workplace Hazardous Materials Information System or WHMIS is designed to ensure that all employers obtain the information they need to inform and train their employees properly about hazardous materials used in the workplace. WHMIS was developed through extensive consultation with industry and labour representatives and the federal, provincial and territorial governments. The goal of WHMIS is to reduce the incidence of illness and injuries resulting from the use of hazardous materials in the workplace. Through legislation, the WHMIS consensus establishes uniform requirements to ensure that the hazards of materials produced or sold in, imported into or used within workplaces in Canada are identified by suppliers and employers using standard classification criteria. WHMIS provides employers and workers with one additional tool to improve their understanding of hazardous materials.To make the best use of this tool, suppliers and employers have certain responsibilities. A ‘supplier’ is a manufacturer, processor or packager of a controlled product or a person who, in the course of business, imports or sells controlled products. A ‘controlled product’ is defined for WHMIS under the federal Hazardous Product Act as any product, material or substance specified by the regulations included in any of the classes listed in Table 1 (see page 6). An ‘employer’ is, for the purposes of WHMIS, the of a controlled product in the workplace or the producer of a controlled product as part of a workplace process.

Under occupational safety and health legislation, employers are also required to provide their employees with hazard information received from their suppliers with respect to controlled products used or produced in the workplace, by means of appropriate workplace labels, by distributing MSDS and by providing worker education on the safe use of hazardous materials. WHMIS is designed to ensure that all employers receive the information they need to educate and train their employees properly in the use of hazardous materials in the workplace. It will also provide employees with necessary hazard information so they can participate in, and , the precautionary measures instituted in their workplaces. As a supplier of petrochemical products in Canada, Imperial Oil has issued material safety data sheets for all Imperial Oil products and prepared labels that comply with WHMIS for all controlled products. Controlled products can be easily identified because of the special WHMIS supplier label. Material Safety Data Sheets should be consulted prior to handling a product to ascertain whether there are any specific health and safety risks or special handling requirements that should be addressed. Imperial Oil will continue to investigate the potentially hazardous properties of existing and new materials through extensive testing and research programs.

Suppliers must convey hazard information to purchasers in a specified manner by means of labelling of the controlled products or containers of the controlled products, and by providing more detailed information concerning the controlled product in the form of a Material Safety Data Sheet (MSDS).

5


HEALTH AND SAFETY PRECAUTIONS

Material Safety Data Sheets

Product Handling

What kind of information does an MSDS provide?

Most lubricating oils and greases are not controlled under WHMIS legislation in Canada. However, certain basic handling procedures should be observed to keep the petroleum products off the skin and to avoid inhalation of their vapours and mists. The following guidelines apply to the handling of all petroleum products and in general to other chemicals with which you may come in .

An MSDS typically contains the following types of information: • Physical data on the product (e.g. viscosity, flash point) • The nature and degree of health, environmental and safety hazards associated with the product • Precautionary guidelines for proper and safe handling of the product in order to avoid fire, explosion and acute and chronic health hazards • Emergency procedures in the event of fire, spill or excessive exposure to the product by skin , ingestion or inhalation Imperial Oil customers in Canada can obtain Material Safety Data Sheets (MSDS) and Workplace Hazardous Materials Information System (WHMIS) information, in English or French, for all products. Through the customer-establishment process, customers of WHMIS-controlled products will receive a Material Safety Data Sheet (MSDS) on or before first shipment of the controlled product. Subsequent updates to that sheet are directed to the identified customer .

Always to: • Minimize skin with whatever product you are using. • Remove oils from the skin promptly, using mild nonabrasive soap and warm water or a skin cleanser and warm water. • Do not use gasoline, solvents, kerosene or similar products to remove oil or grease from the skin. • Do not wear oil-soaked clothing. Launder all work clothes frequently. Put oily rags in the correct container. Discard oil-soaked shoes and belts. • Wash hands and face thoroughly before eating and at the end of a shift. Take a shower if possible before leaving work. • Clean up spilled product promptly and dispose of it correctly. Keep product out of sewers and waterways.

MSDS are also available through any of the following options:

• Get first aid for all cuts and scrapes and report as required.

• Visit our website at www.imperialoil.ca/msds.

• Avoid inhalation of oil mist and solvent vapours.

• Use our automated ‘FAX-BACK’ system: call 1-800-IOL-MSDS or 1-800-465-6737. Please have your fax number available.

• Obtain medical advice on all potential health-hazard problems.

• Call 1-888-968-3776 to speak to a customer service representative.

One of the least recognized, yet most serious, workplace hazards is a punctured oil line under pressure. When a jet of pressurized fluid makes with the skin, it can enter the body and cause serious injury. That is why, under absolutely NO circumstances, should you try to stop a hydraulic oil leak with your finger. Always be aware of the risk when you’re working near hydraulic equipment and if your skin is struck by pressurized fluid, seek medical attention immediately.

• your Imperial sales representative In addition, our technical sales representatives can assist in providing information on the safe storage and use of Imperial Oil products. Special customer requests will be directed to our industrial hygiene/ product safety department.


6

HEALTH AND SAFETY PRECAUTIONS Table 1 – WHMIS Class and Division Hazard Symbols CLASS AND DIVISION DESIGNATION

SYMBOL

CLASS A – Compressed Gas

CLASS B – Flammable and Combustible Material

Flammable Gas Flammable Liquid Combustible Liquid Flammable Solid Flammable Aerosol Reactive Flammable Material

CLASS C – Oxidizing Material

CLASS D – Poisonous and Infectious Material 1. M aterial causing immediate and serious toxic effect

2. Material causing other toxic effects

3. Biohazardous infectious material

CLASS E – Corrosive Material

CLASS F – Dangerously Reactive Material

7


SUSTAINABILITY

The three pillars of Advancing Productivity serve as part of our corporate commitment to sustainability. At ExxonMobil, “sustainability” means balancing economic growth, social development and environmental protection so that future generations are not compromised by actions taken today. To put sustainability in motion, we take a holistic approach across our offer, communication and process, providing innovative lubricants and services that can create tangible value for you in the areas of safety, environmental care and productivity. Through Advancing Productivity, our goal is to deliver performance benefits in these three crucial areas of your business so that you can achieve your full vision of success. *

Safety

Environmental Care

Productivity

Minimizing employee – equipment interaction

Designed to help lighten environmental touch

Controlling costly downtime and delays

We offer products and services that can help you mitigate potential

Our commitment to minimizing environmental impact has led us

Enhancing the competitive potential of our customers is an important

employee injury caused by direct with equipment. These

to create technologically advanced products and innovative services with

part of Advancing Productivity. We achieve this objective through

products and services are designed to help:

that goal in mind. We strive to help you achieve this goal through:

lubrication solutions that can help provide:

• Provide long drain intervals and

• Optimized oil drain intervals, which

enhance equipment reliability, minimizing maintenance, repair

can help reduce used oil volume and product packaging, as well as

• Long drain intervals, which can help improve equipment availability,

and replacement • Reduce the potential for leaks

service-related risks • Long component life, to help reduce

that arise from handling used oil and related products • Increase employee safety

worn equipment disposal and maintenance-related waste • Potential GHG emissions reduction

awareness and knowledge of a

and other energy-efficiency benefits

lubricant’s effect on health and safety • Address the risk of potential product misapplication

reduce lubricant transaction frequency and minimize disposal costs • Powerful equipment protection, which can maximize equipment availability, helping you control costs of equipment maintenance and replacement • Inventory consolidation potential

*Visit mobilindustrial.com to learn how certain Mobil-branded lubricants may provide benefits to help minimize environmental impact. Actual benefits will depend upon product selected, operating conditions, and applications.


8

ENERGY EFFICIENCY About the Energy Efficiency Seal As the supplier of Mobil™ Industrial Lubricants, we are committed to providing products and services that help deliver tangible performance and sustainability-related benefits – as well as material economic advantages – to Canadian industry and consumers. Our extensive range of high performance lubricants can help increase equipment operating efficiency and engine fuel economy. These lubricants can also contribute to reduced energy and resource use, lower emissions, and cost savings for industrial equipment. The Energy Efficiency Seal is the typographic representation for all Mobil Industrial Lubricants that meet the rigorous criteria for outstanding energy efficiency.

These criteria are determined on a case-by-case basis and are dependent on the product category and application. Statistically valid data must be available to substantiate the energy efficiency claim and demonstrate a statistically significant decrease in energy consumption or increase in efficiency when compared with commercially available products designed for the same application.

Below are the Mobil Industrial Lubricants products in which this technology is available: Mobil SHC™ 500 Mobil DTE 10 Excel™

Energy efficiency relates solely to the fluid performance when compared with Mobil DTE 10 Excel™ standard hydraulic fluids. The technology allows an increase in hydraulic pump efficiency of up to 6 percent compared with Mobil DTE 20 Series when tested in standard hydraulic applications. The energy efficiency claim for this product is based on test results conducted in accordance with applicable industry standards and protocols.

Mobil SHC Pegasus™ The energy efficiency of Mobil SHC Pegasus relates solely to the fluid performance when compared to standard Mobil SAE 40 natural gas engine oils. Mobil SHC Pegasus technology demonstrated an increase in fuel efficiency of up to 1.5 percent, compared to Mobil Pegasus 1005 and 805 series when tested in standard natural gas engine applications under controlled conditions. Efficiency improvements will vary based on operating conditions and applications. The energy efficiency claim for this product is based on test results on the use of the fluid conducted in accordance with applicable industry standards and protocols. Mobil SHC™ Gear

Energy efficiency relates solely to the fluid performance when compared with conventional reference (150-1000) oils of the same viscosity grade in gear applications. The technology used allows an increase in fuel efficiency of up to 3.6 percent compared with the reference oil when tested in a worm gearbox under controlled conditions. Efficiency improvements will vary based on operating conditions and applications.

Mobil SHC™ 600 Mobil SHC Cibus™

Energy efficiency relates solely to the fluid performance when compared to conventional (mineral) Mobil SHC Cibus™ reference oils of the same viscosity grade in circulating and gear applications. The technology allows an increase in fuel efficiency of up to 3.6 percent compared to the reference oil when tested in a worm gearbox under controlled conditions. Efficiency improvements will vary based on operating conditions and application. The above products provide energy efficiency benefits when compared with standard products of the same category and application, helping our customers to operate their equipment more efficiently.

9


APPLICATION INDEX OF PRODUCTS

INDUSTRIAL LUBRICANTS Chain Oils.................................................................................................................... 18 Circulating Oils.......................................................................................................19-20 Compressor Oils..................................................................................................... 21-24 Cylinder Oils................................................................................................................25 Food Industry Lubricants........................................................................................26-27 Gas Engine Oils......................................................................................................28-32 Gear Oils – Enclosed Gears...................................................................................33-34 Gear Oils – Enclosed Gears Specialty...................................................................35-36 Gear Oils – Open Gears..............................................................................................36 Heat Transfer Fluids.....................................................................................................37 Hydraulic Fluids...................................................................................................... 37-40 Hydraulic Fluids – Less Flammable.............................................................................41 Metalworking Fluids................................................................................................42-43 Mist Oils.......................................................................................................................44 Other Industrial Oils................................................................................................45-46 Paper Machine Oils.....................................................................................................47 Pneumatic Tool Lubricant............................................................................................48 Quench Oils.................................................................................................................48 Refrigeration Oils.........................................................................................................49 Rust Preventive............................................................................................................50 Spindle Oils.................................................................................................................51 Transformer Oils..........................................................................................................51 Turbine Oils.............................................................................................................52-54 Way Oils......................................................................................................................55 COMMERCIAL VEHICLE LUBRICANTS Heavy Duty Diesel Engine Oils...............................................................................60-62 Heavy Duty Natural Gas Engine Oils..........................................................................62 Heavy Duty Power Transmission Fluids............................................................63, 66-67 Tractor Hydraulic Fluids...............................................................................................68 Railway........................................................................................................................68 Coolant/Antifreeze ......................................................................................................69


10

APPLICATION INDEX OF PRODUCTS ENGER VEHICLE LUBRICANTS enger Vehicle Engine Oils..................................................................................74-76 enger Vehicle Drive Train Fluids.........................................................................77-78 Motorcycle Oils ............................................................................................................. 78 enger Vehicle Installer Greases............................................................................. 78 MARINE LUBRICANTS Crosshead Engine Oils.................................................................................................. 81 Trunk Piston Engine Oil................................................................................................. 82 Marine Hydraulic Oil...................................................................................................... 83 Marine Grease............................................................................................................... 83 AVIATION LUBRICANTS Grease...................................................................................................................... 85-86 Jet Oil............................................................................................................................ 86 GREASES Automotive..................................................................................................................... 91 Couplings....................................................................................................................... 92 Electric Motors............................................................................................................... 93 Environmentally Aware.................................................................................................. 93 Food Industry (NSF H-1)............................................................................................... 94 Gears – Enclosed, Semi-Fluid....................................................................................... 94 Gears – Open................................................................................................................ 95 High Temperature – Clay Thickened.............................................................................. 96 Marine........................................................................................................................... 96 Multi-Purpose............................................................................................................97-99 Off-Highway Heavy Duty Equipment and On-Highway Trucking...................................100 Paper Machines............................................................................................................ 101 Pneumatic Tools........................................................................................................... 101 Railway.........................................................................................................................102 Drilling..........................................................................................................................102 Specialty Synthetic.......................................................................................................103 Threads.................................................................................................................103-104 Wind Turbine.................................................................................................................104 Wire Ropes...................................................................................................................104

11


MOBIL SHC GENERAL RECOMMENDATIONS

Productivity That’s Proven What truly sets Mobil SHC™ synthetic lubricants apart from its competitors is its track record. It represents Productivity That’s Proven – the underlying claim behind our brand. No other synthetic lubricant has the experience, the proof, and the reputation to match it. The full – and unmatched – suite of products that carry the Mobil SHC name have been tried, tested and proven in almost every type of equipment, under almost every condition. Mobil SHC General Recommendations: Circulating

Mobil SHC 600™ Series Mobil Glygoyle™ Numbered Series

Compressors

Mobil Rarus SHC™ 1020 Series (rotary screw and vane) Mobil Rarus™ 800 Series (reciprocating)

Food Industry (NSF H-1) Mobil SHC Polyrex™ Grease Series Gas Engine

Mobil SHC Pegasus™ 30 Mobil Pegasus™ 1

Gear

Mobil SHC 600™ Series Mobil SHC Gear™ Series Mobilgear SHC™ XMP Series (wind turbines)

Hydraulics

Mobil SHC™ 500 Series Mobil EAL Envirosyn™ H Series

Paper Machine

Mobil SHC™ PM Series Mobilith SHC™ PM Grease Series

Turbine

Mobil SHC™ 800 Series

Grease

Mobilith SHC™ Series (multi-purpose) Mobil SHC Polyrex™ Series (Food/NSF H-1, high temperature) Mobil SHC™ PF 462 (extreme high temperature) Mobil SHC™ Grease 460 WT (wind turbines) Mobiltemp SHC™ 32 (high speed) Mobil SHC™ Grease 100 EAL Series (environmentally aware) Mobilith SHC™ PM Series (paper machine)


12



PAGE

Chain Oils Circulating Oils Compressor Oils Cylinder Oils

Millcot™ K.................................................................................18 Mobil™ Chainoil........................................................................18 Mobil™ Heavy Duty (HD) Chainoil............................................18

Food Industry Lubricants

Mobil™ Food and Beverage Industry Selector........................ 26 Mobil SHC Cibus™ Series....................................................... 27 Mobil DTE™ FM Series........................................................... 27

Mobil SHC™ 600 Series...........................................................19 Mobil Glygoyle™ Numbered Series..........................................19 Mobil Vacuoline™ 500 Series...................................................19 Mobil DTE™ Oil Named Series............................................... 20 Mobil Teresstic™-C.................................................................. 20 Mobil Teresstic™ V 150............................................................ 20 Mobil Rarus SHC™ 1020 Series............................................. 21 Mobil Rarus™ 800 Series........................................................ 21 Mobil Rarus™ 427................................................................... 21 Exxcolub™ SCF PG................................................................ 22 Exxcolub™ SCF PS................................................................. 22 Exxcolub™ SCF M2................................................................. 22 Exxcolub™ Application Chart.................................................. 23 Mobil™ Compressor Oils......................................................... 24 Mobil™ Compressor Oils 264 and 460.................................... 24 Mobil™ Compressor Oil N 100................................................ 24 Mobil Teresstic™ AC 32........................................................... 24 Mobil™ Cylinder Oils............................................................... 25 Mobil DTE™ Oil 205................................................................ 25

MARINE

ENGER

PRODUCT

COMMERCIAL

OIL APPLICATION

INDUSTRIAL

INDUSTRIAL PRODUCT LISTING BY APPLICATION

AVIATION

14

GREASES


INDUSTRIAL PRODUCT LISTING BY APPLICATION OIL APPLICATION

PRODUCT .

PAGE

Gas Engine Oils

Engine Oil Selection Chart...................................................... 28 Mobil SHC Pegasus™ 30........................................................ 29 Mobil Pegasus™ 1................................................................... 29 Mobil Pegasus™ GMA............................................................. 29 Mobil Pegasus™ 805............................................................... 29 Mobil Pegasus™ GLX.............................................................. 30 Mobil Pegasus™ 710............................................................... 30 Mobil Pegasus™ 610............................................................... 30 Mobil Pegasus™ 605............................................................... 31 Mobil Pegasus™ 801 Series.................................................... 31 Mobil Pegasus™ AGX.............................................................. 31 Engine Oil Selector.................................................................. 32

..........................................................................................

Gear Oils – Enclosed Gears

Mobil SHC Gear™ Series (ISO VG 150-1000)......................... 33 Mobil SHC Gear™ 1500, 3200, and 6800................................ 33 Mobilgear™ 600 XP Series...................................................... 34 SPARTAN™ EP-C.................................................................... 34

Gear Oils – Enclosed Gears Specialty Gear Oils – Open Gears Heat Transfer Fluids

Mobil SHC™ Gear OH Series.................................................. 35 Mobilgear SHC™ XMP Series................................................. 35 Mobil Glygoyle™ Series........................................................... 35 Mobil Iogear™ EP 100............................................................. 36 Mobil SHC Gear™ 46M........................................................... 36 Mobiltac™ 375 NC................................................................... 36 Mobil Geargard™ HVS............................................................. 36 Mobiltherm™ and Thermoil™.................................................. 37

15 Visit mobil.ca /pds for the most current product information

Click Here to return to PRODUCT APPLICATION INDEX

PAGE

Mobil SHC™ 500 Series.......................................................... 37 Mobil DTE 10 Excel™ Series................................................... 37 Mobil DTE™ 20 Series............................................................. 38 Mobil Univis™ Ultra.................................................................. 38 Mobil Univis™ Extra................................................................. 38 Mobil Univis™ N-C Series........................................................ 39 Mobil Univis™ HVI 13.............................................................. 39 Mobil Univis™ BIO-C 40.......................................................... 39 Mobil Nuto™ H Series.............................................................. 40 Forum™ EP 46 and 68............................................................. 40

Hydraulic Fluids – Less Flammable

Mobil Nyvac™ FR 200D........................................................... 41 Mobil Pyrogard™ 53................................................................. 41

Metalworking Fluids

Mobilmet™ 420 Series............................................................. 42 Mobilmet™ 760 Series............................................................. 42 Mobilcut™ 100......................................................................... 42 Mobilcut™ 140......................................................................... 43 Mobilcut™ 350......................................................................... 43 Formesso™ Summer Grade.................................................... 43

Mist Oils

Mobilgear™ MS Series............................................................ 44


16

GREASES


AVIATION

Other Industrial Oils Canthus™ 680......................................................................... 45 Faxam™................................................................................... 45 Mobil™ Sawguide Oils............................................................. 45 Mobil™ Synthetic Oven Lube 1090.......................................... 46 Mobil Synturion™ 6.................................................................. 46 Mobil™ System Cleaner........................................................... 46 Slurry Oil 62............................................................................. 46

MARINE

Hydraulic Fluids

ENGER

PRODUCT

COMMERCIAL

OIL APPLICATION

INDUSTRIAL

INDUSTRIAL PRODUCT LISTING BY APPLICATION

INDUSTRIAL PRODUCT LISTING BY APPLICATION OIL APPLICATION

PRODUCT

PAGE

Paper Machine Oils

Mobil SHC™ PM Series........................................................... 47 Mobil DTE™ PM Series........................................................... 47

Pneumatic Tool Oils Quench Oils

Mobil Arox™ EP Series............................................................ 48

Refrigeration Oils

Mobil Glygoyle™ 22................................................................. 49 Mobil Gargoyle™ Arctic Oils..................................................... 49 Mobil Gargoyle Arctic SHC™ 200 Series................................. 49 Mobil Zerice™ S Oils............................................................... 49

Rust Preventive

Mobilarma™ 245...................................................................... 50 Mobilarma™ 700 Series........................................................... 50 Mobil Vaprotec™ Light............................................................. 50

Spindle Oils

Mobil Velocite™ Oil Numbered Series..................................... 51

Mobil Fenso™ Series............................................................... 48

Transformer Oils Voltesso™................................................................................ 51

Turbine Oils

Mobil SHC™ 800 Series.......................................................... 52 Mobil DTE™ 932 GT................................................................ 52 Mobil DTE™ 800 Series........................................................... 52 Mobil DTE™ 724 Oil................................................................ 53 Mobil DTE™ 732 Oil................................................................ 53 Mobil DTE™ 700 Series........................................................... 53 Mobil Teresso™........................................................................ 54 Mobil Teresso™ GTC Series.................................................... 54

Way Oils

Mobil Vactra™ Oil Numbered Series........................................ 55 Mobil Vacuoline™ 1400 Series................................................. 55



CHAIN OILS Millcot™ K. Tacky, anti-spattering, general purpose oils, originally developed for textile machinery and well suited for a wide range of thin film applications in general manufacturing. Ideal for lumber industry applications, such as chains and hand oiled bearings

Millcot K 68 Millcot K 100 Millcot K 220

68 100 220

20 30 50

Product Mobil Chainoil Light Mobil Chainoil Heavy

Pour Point, °C, ASTM D97

Flash Point °C, ASTM D92

65.4 105 209

8.1 11.1 17.3

-24 -12 -3

196 202 238

for moderate temperatures (-10°C to 30°C), Mobil Chainoil Light for lower temperatures down to -30°C. Also recommended for industrial chain drive and plain bearing applications requiring a tacky anti-wear oil.

cSt at 40°C

Pour Point °C, ASTM D97


40 150

-33 -20

180 190

anti-wear and extreme pressure additives help reduce wear to guide bars, chains and sprockets. A specialized inhibitor minimizes rust and corrosion. A tackiness additive helps reduce oil consumption due to throw-off. Also recommended for industrial chain drive and plain bearing applications requiring a tacky anti-wear oil.

Viscosity, ASTM D445 cSt at 40°C



220

-15

260

MARINE

Mobil Heavy Duty Chainoil

cSt at 100°C

Viscosity, ASTM D445

Mobil™ Heavy Duty (HD) Chainoil. This chainsaw lubricant helps extend the life of chains and guide bars on high speed chainsaws operating under severe conditions. Recommended for spring through fall operation across a temperature range of -5°C to 40°C. High viscosity base stocks enhanced with Product

cSt at 40°C

ENGER

Mobil™ Chainoil delivers excellent chain and bar lubrication in residential and industrial chain saw applications. A tacky stay-in-place film of oil lubricates, cleans and cools moving parts, helping to extend bar and chain life. Mobil Chainoil Heavy is recommended


COMMERCIAL

Approximate Product ISO VG SAE Grade

in sawmills and lead screws on plywood veneer lathes. Millcot K oils are fortified with rust inhibitors and anti-wear additives and can be applied using most lubrication methods.

INDUSTRIAL

INDUSTRIAL LUBRICANTS

AVIATION


18

GREASES


INDUSTRIAL LUBRICANTS CIRCULATING OILS Mobil SHC™ 600 Series. These exceptional performance synthetic gear and bearing oils help increase productivity by delivering outstanding equipment protection, oil life and problem-free operation. The latest proprietary and patent pending Mobil SHC technology performs well beyond the capabilities of conventional oils in demanding applications across a wide range of temperatures. These products are resistant to

mechanical shear, even in heavily loaded gear and high shear bearing applications, so that there is virtually no loss of viscosity. Mobil SHC 600 Series lubricants have excellent low temperature properties, as well as improved air release performance in the lower viscosity grades. For information on energy efficiency, please see page 7.

Product ISO VG

Viscosity, ASTM D445 FZG scuffing test, cSt at 40°C

cSt at 100°C

V.I. ASTM D2270


Flash Point, °C, ASTM D92

DIN 51534 (mod), A/16.6/90, Fail Stage

Mobil SHC 624 Mobil SHC 625 Mobil SHC 626 Mobil SHC 627 Mobil SHC 629 Mobil SHC 630 Mobil SHC 632 Mobil SHC 634 Mobil SHC 636 Mobil SHC 639

32 46 68 100 150 220 320 460 680 1000

6.3 8.5 11.6 15.3 21.1 28.5 38.5 50.7 69.0 98.8

148 161 165 162 166 169 172 174 181 184

-57 -54 -51 -45 -42 -42 -42 -39 -39 -33

236 225 225 235 220 220 225 228 225 222

11 12 12 12 13 13+ 13+ 13+ 13+ 13+

32 46 68 100 150 220 320 460 680 1000

Mobil Glygoyle™ Numbered Series oils are polyalkylene glycol-based (PAG) high performance lubricants that provide outstanding lubrication in extreme temperature gear, bearing and circulation system applications in conditions well beyond the capabilities of mineral oils. They are shear-stable

Viscosity, ASTM D445 Spec. Gravity

Product Mobil Glygoyle 22

cSt at 40°C

cSt at 100°C



kg/l at 20°C, ASTM D1298

177

25.1

-41

229

1.007

Mobil Vacuoline™ 500 Series are high performance heavy duty circulating oils specifically designed to meet the critical requirements of high speed No-Twist Rod Mills manufactured by Morgan Construction Company and Danieli. Their versatile performance makes them an excellent choice for circulation systems of primary and mini-mill bearings. These oils are formulated from Product ISO VG Mobil Vacuoline 525 Mobil Vacuoline 537

and have outstanding resistance to thermal degradation, oxidation and the formation of sludge and deposits. They incorporate a proprietary additive package designed to enhance EP/anti-wear protection, corrosion and rust protection and foam resistance without detracting from the intrinsic attributes of the PAG base oils.

– 320

high quality base stocks and a proprietary additive system to provide enhanced film strength, anti-wear and anti-scuff properties. They enjoy strong from equipment builders, and their exceptional performance over many decades makes them the lubricant of choice of many mill operators, worldwide.

Viscosity, ASTM D445 Spec. Gravity cSt at 40°C

cSt at 100°C

V.I. ASTM D2270



kg/l at 15.6°C, ASTM D1298

89 309

10.7 24.4

99 96

-24 -12

264 288

0.88 0.89



CIRCULATING OILS to emulsification. They provide excellent protection against rust and corrosion, including resistance to salt water, and good anti-wear properties. These grades have excellent air release properties, enabling entrained air to separate, avoiding pump cavitation and erratic operation.


Product ISO VG

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270



Mobil DTE Oil Light Mobil DTE Oil Heavy Medium Mobil DTE Oil Heavy

31.0 65.1 95.1

5.5 8.7 10.9

102 95 92

-18 -15 -15

218 223 237

32 68 100

ring oiled steam turbine bearings. All viscosity grades are formulated with select high performance mineral oil base stocks and carefully chosen additives to provide long service life, outstanding oxidation control, excellent rust and corrosion protection, rapid air release and foam control.

Product ISO VG


cSt at 100°C

V.I. ASTM D2270


Mobil Teresstic-C 100 Mobil Teresstic-C 150 Mobil Teresstic-C 220 Mobil Teresstic-C 320

100.0 150.0 220.0 320.0

11.3 14.6 18.4 23.7

99 96 92 94

-15 -12 -6 -6

99 96 92 94

Product ISO VG Mobil Teresstic V 150

150

Flash Point, °C, ASTM D92 252 260 256 278

oxidation inhibitors help control corrosion and prolong oil life. A potent anti-wear additive helps protect gears and associated bearings.

MARINE

Mobil Teresstic™ V 150 circulating oil is recommended for older paper machines with specific performance requirements. A friction reducing additive is particularly effective in dryer section journal bearings. Rust and

ENGER

Mobil Teresstic™-C. These oils are formulated for long service life in circulating systems, hydraulic systems that do not require an anti-wear oil, heat transfer systems, light duty gear cases, friction clutches and other industrial units for which long, trouble-free service is required. They are also used to lubricate bath and

COMMERCIAL

Mobil DTE™ Oil Named Series are performance circulating oils for applications requiring long lubricant life, including steam and hydro turbine sets and other systems. These oils are formulated from highly refined base stocks and additives, which provide extremely high levels of chemical and thermal stability, rapid separation from water and high resistance

INDUSTRIAL



cSt at 100°C


150

14.6

-3

Flash Point, °C, ASTM D92 256

AVIATION


20

GREASES


INDUSTRIAL LUBRICANTS COMPRESSOR OILS Mobil Rarus SHC™ 1020 Series. These high performance oils are primarily intended for severe duty rotary screw and vane air compressors. They are particularly well suited where mineral oil based products are not meeting expectations, in applications subjected to high final compression temperatures or where extended oil drain intervals are desired. Designspecific wax-free synthetic fluids and high technology Viscosity, ASTM D445

Product ISO VG Mobil Rarus SHC 1024 Mobil Rarus SHC 1025 Mobil Rarus SHC 1026

additives are formulated for exceptional resistance to oxidation and thermal degradation. Their high viscosity index delivers effective lubrication at high temperatures. Mobil Rarus SHC 1020 Series oils help improve productivity and reduce maintenance costs by minimizing downstream deposits and delivering outstanding equipment protection and reliability.

32 46 68

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270



31.5 44 66.6

5.7 7.2 10.1

127 131 136

-48 max -45 max -45 max

245 246 246

Mobil Rarus™ 800 Series is a line of high performance air compressor lubricants primarily intended for the lubrication of severe duty reciprocating air compressors. They are engineered to meet or exceed the stringent requirements of the major compressor manufacturers. They are formulated with synthetic ester base oils and a high technology additive system

that provides exceptional equipment protection and reliability. Mobil Rarus 800 Series oils provide excellent wear protection and outstanding resistance to oxidation and thermal degradation. Their unique formulation provides the ability to help reduce maintenance costs through minimizing equipment problems and downstream deposits and carryover.

Product ISO VG


cSt at 100°C

V.I. ASTM D2270



Mobil Rarus 824 Mobil Rarus 827 Mobil Rarus 829

29.5 107.5 158

5.5 10.12 13.2

127 66 70

-54 -36 -40

244 270 270

32 100 150

Mobil Rarus™ 427 is an air compressor lubricant designed to meet the requirements of the major compressor manufacturers. It is formulated with high quality mineral base oils and an additive system designed

to provide equipment protection and reliability. Mobil Rarus 427 provides good wear protection and air-oil separation, and limits valve deposits.

Product ISO VG


cSt at 100°C

V.I. ASTM D2270


Mobil Rarus 427

104.6

11.6

100

264

100



COMPRESSOR OILS

Exxcolub™ SCF PS. These quality synthetic blend gas compressor lubricants combine hydro treated mineral oil and polyalphaolefin (PAO) synthetic hydrocarbon oil. The proprietary multi-function silicone additive enhances lubricity and minimizes foaming.

A pour point depressant improves low temperature performance. A proprietary additive system reduces the effects of corrosive materials present in compressor streams, where lubricant is typically subjected to harsh chemicals, including hydrogen sulphide.

Exxcolub™ SCF M2. These hydrotreated paraffinic gas compressor lubricants are blended with a proprietary multi-function silicone additive to enhance lubricity and minimize foaming. A pour point depressant strengthens low temperature performance. Exxcolub SCF M2 oils are recommended for applica-

tions where lubricant is subjected to harsh chemical environments, including the presence of hydrogen sulphide. Also recommended for rotary screw, vane and reciprocating compressors in industrial applications requiring a higher viscosity lubricant.

Product ISO VG 100 150 190 100 150 100 150


cSt at 100°C

V.I. ASTM D2270



96 133 195 101 144 94 153

17.6 26 35.1 13.5 17.6 11.8 17.1

202 232 226 135 135 116 121

-48 max -42 max -43 max -33 max -33 max -37 max -30 max

218 257 304 277 288 248 271

MARINE

Exxcolub SCF PG 100 Exxcolub SCF PG 150 Exxcolub SCF PG 190 Exxcolub SCF PS 100 Exxcolub SCF PS 150 Exxcolub SCF M2 100 Exxcolub SCF M2 150

ENGER

long service life in high temperature operations. Inherently high viscosity indexes (>200) facilitate low temperature startup and help maintain acceptable viscosity over a wide temperature range. Polyalkylene Glycols are highly stable even at sustained high temperatures; this helps keep deposits to a minimum.

COMMERCIAL

Exxcolub™ SCF PG. These custom-blended Polyalkylene Glycol (PAG) synthetic lubricants deliver excellent performance in severe-service gas compressor applications, exceeding the capabilities of petroleum-base and many synthetic-base lubricants. Excellent oxidative and thermal stability helps assure

INDUSTRIAL


AVIATION


22

GREASES


INDUSTRIAL LUBRICANTS COMPRESSOR OILS

Lubricant

Benefits

Especially recommended for

Exxcolub SCF PG Polyalkylene glycol synthetic formula Grades: 100 & 150

• Approximately twice as resistant as mineral oils to gas dilution

• Sour gas and high CO2 applications

• Powerful corrosion inhibitors minimize risk of corrosion from hydrogen sulphide • Will allow a maximum of 20 percent (by weight) hydrocarbon dilution

Exxcolub SCF PS Synthetic blend Grades: 100 & 150

• Lighter than water, effective waterresistance and demulsibility • Silicone based corrosion inhibitors lessen the risk of corrosion from hydrogen sulphide

• Heavy hydrocarbons where severe dilution may occur • Cold weather conditions, especially for compressing gas of high specific gravity in cold weather

• Gas of low specific gravity under cold weather conditions and requiring a cost-effective alternative to a synthetic lubricant

• Very low vapour pressure minimizes lubricant consumption

Exxcolub SCF M2 Group ll mineral oil Grades: 100 & 150

• Control over carbon and varnish, with the potential for extended oil drain intervals

• Light hydrocarbons, sour gas and low water content where a modestly priced lubricant is required

• Silicone based corrosion inhibitors minimize risk of corrosion from hydrogen sulphide



COMPRESSOR OILS Mobil™ Compressor Oils provide outstanding lubrication in rotary and reciprocating air compressors. All viscosity grades deliver outstanding oxidation performance, wear protection, resistance to rust and corrosion, rapid water separation and foam control. Their thermal

Mobil Compressor Oil 68 Mobil Compressor Oil 122 Mobil Compressor Oil 220

68 – 220


cSt at 100°C



68 122 220

9.1 12.3 18.4

-21 -15 -12

240 230 245

Product ISO VG Mobil Compressor Oil 264 Mobil Compressor Oil 460

– 460


cSt at 100°C



280 485

23 35

-12 -12

280 280

Mobil Compressor Oil N 100

100


cSt at 100°C



98

9

-51

200

Teresstic AC 32

32

with silver plated components – requiring a mineral type oil that does not contain anti-wear additives. (For applications requiring anti-wear properties, Nuto H oils are recommended.)

AVIATION

Mobil Teresstic™ AC 32 is a compressor and circulating oil formulated primarily for applications in ammonia production and chemical plants. Mobil Teresstic AC 32 is well suited for hydraulic systems – such as those Product ISO VG

exposed to very high surface film temperatures, this oil produces miniscule amounts of soft, fluffy carbon deposits that are easily displaced. This product can also be used as a general purpose ISO 100 lubricant.

MARINE

Mobil™ Compressor Oil N 100. This ISO 100 viscosity mineral oil blend is particularly well suited as a once-through cylinder lubricant in large reciprocating compressors where heavy exhaust valve deposits have been observed with other oils. When Product ISO VG

with scrubber solution. They are ideally suited for initial break-in of compressor cylinders and packing. Both grades are formulated for outstanding cylinder and piston ring lubrication, oxidation resistance and chemical tolerance.

ENGER

Mobil™ Compressor Oils 264 and 460 are formulated with highly refined paraffin base oils and proprietary additive technology for compressor cylinders and packing. These high viscosity lubricants are recommended for applications where gas is sour, wet or contaminated

COMMERCIAL

Product ISO VG

stability and oxidation resistance help maintain clean compressors, enabling longer running periods between scheduled maintenance and oil changes. Outstanding anti-wear and corrosion protection help enhance equipment life, while reducing maintenance requirements.

INDUSTRIAL



cSt at 100°C



32

5.13

-40

204

Additional Compressor Oil Mobil SHC Cibus™ Series......................................... 27


24

GREASES


INDUSTRIAL LUBRICANTS CYLINDER OILS Mobil™ Cylinder Oils are high performance high viscosity oils designed for use in enclosed worm gears operating at moderate to high speeds and temperatures, and where heavy loads, slow speeds or high temperatures demand high viscosity oils. They are also intended for use in steam engines, natural gas compressors requiring a separate cylinder lubricant, Product ISO VG Mobil 600 W Cylinder Oil Mobil 600 W Super Cylinder Oil Mobil Extra Hecla Super Cylinder Oil

-- 460 680


cSt at 100°C

V.I. ASTM D2270



375 460 680

27.0 30.5 35.8

95 95 85

-9 -6 0

282 282 282

Mobil DTE™ Oil 205 is a lubricating oil formulated to provide excellent anti-wear and friction reducing properties for compressor cylinder lubrication, as well as protection against rust and corrosion. Mobil DTE Oil 205 is designed for wet-gas compression and Product Mobil DTE Oil 205

and down-hole applications. They are formulated from high quality base stocks that are resistant to oxidation and thermal degradation, and the build-up of harmful deposits caused by the high operating temperatures of steam cylinders. They protect against rust and corrosion, provide good film strength and excellent lubricity and they are resistant to water washout.

exhibits excellent resistance to washing by water and other entrained liquids. It resists oxidation and provides effective lubrication at low feed rates, helping to extend operating periods between valve-cleaning intervals.

Viscosity, ASTM D445 Spec. Gravity, cSt at cSt at Pour Point, Flash Point, kg/l at 15.6°C, 40°C 100°C °C, ASTM D97 °C, ASTM D92 ASTM D1298 220

19.5


-9

282

0.90


FOOD INDUSTRY LUBRICANTS

Mobil™ Food and Beverage Industry

141500

Mobil SHC Cibus™ 46

51524-HLP 51506-VDL

141498


51524-HLP 51506-VDL

141499


51517-CLP

141502


51517-CLP

141503


51517-CLP

141505


51517-CLP

141501

Mobil Glygoyle™ 460

KP1K-20

136467

Mobilgrease™ FM Series (101)

KP1K-20

141881

Mobil SHC Polyrex™ Series KPFHC2P-20 (462)

MARINE

51524-HLP

ENGER


contamination from lubricating oils and greases. This comprehensive suite of high performance oils are NSF H1 ed, which is increasingly being requested by major food retailers and government agencies.

COMMERCIAL

The food and beverage processing industry faces unique challenges. Not only must you strive for maximum productivity, you must also guard against the possibility of food contamination, including

INDUSTRIAL


138558

AVIATION

Other Food Industry Lubricants • Mobil DTE™ FM (32, 46, 68): mineral oils • Mobil Synturion™ 6: synthetic mechanical seal fluid • Mobil Gargoyle Arctic SHC™ Series: synthetic refrigeration lubricants


26

GREASES


INDUSTRIAL LUBRICANTS FOOD INDUSTRY LUBRICANTS Mobil SHC Cibus™ Series lubricants are superb performance synthetic, compressor, hydraulic, gear and bearing oils designed to provide outstanding equipment protection, long oil life and problem-free Product ISO VG Mobil SHC Cibus 32 Mobil SHC Cibus 46 Mobil SHC Cibus 68 Mobil SHC Cibus 100 Mobil SHC Cibus 150 Mobil SHC Cibus 220 Mobil SHC Cibus 320 Mobil SHC Cibus 460

32 46 68 100 150 220 320 460


cSt at 100°C

V.I. ASTM D2270



kg/l at 15°C, ASTM D4052

30 43 72 102 162 222 311 458

5.8 7.7 11.4 14.6 20.7 24.5 32.7 43.6

140 148 151 148 150 139 147 148

<-54 -51 -48 -48 -21 -39 -42 -42

253 258 267 273 226 274 284 294

0.829 0.833 0.838 0.839 0.843 0.843 0.854 0.856

Mobil DTE™ FM Series oils meet a wide range of multi-use requirements for equipment in food processing and packaging. These lubricants are qualified as NSF H1 type lubricants and comply with Title 21 CFR 178.3570 by the Food and Drug Product ISO VG Mobil DTE FM 32 Mobil DTE FM 46

32 46

operation in the food and beverage processing and packaging industries. They are formulated from FDA and NSF ed hydrocarbon base fluids and additives.

istration (USA) for lubricants with incidental food . These odourless, tasteless, quality lubricants are formulated with non-toxic NSF/FDA additives and base oils.


cSt at 100°C

V.I. ASTM D2270




31.9 45.5

5.5 6.8

106 105

-12 -9

212 226

0.862 0.868

Additional Food Industry Lubricants Mobil Synturion™ 6.................................................... 46 Mobil Gargoyle Arctic SHC™ Series.......................... 49



GAS ENGINE OILS

Imperial Engine Recommendation – How to Select the Right Oil Model

Product

Ajax

2-cycle

Mobil Pegasus AGX; Mobil Pegasus 801

Caterpillar

All models

Mobil Pegasus 1; Mobil Pegasus GMA; Mobil Pegasus 805

Clark (Dresser-Rand)

All 2-cycle


Cooper-Bessemer

All 2-cycle


Cummins

Most models

Mobil GEO 15W-40

B & C models

Mobil GEO 15W-40

Cooper Enterprises (Delaval)

All models

Mobil Pegasus 801

Fairbanks-Morse (M.E.P.)

2-cycle

Mobil Pegasus 801 SAE 30; Mobil Pegasus 801; Mobil Pegasus GMA

Ingersoll-Rand (Dresser-Rand)

Categories I, II, III

Mobil Pegasus 801 SAE 30

Jenbacher

Type 2 & 3 Leanox Engines

Mobil Pegasus 805; Mobil Pegasus 710

White Superior

4-cycle

Mobil Pegasus GLX; Mobil Pegasus 710

1700 & 2400

Mobil Pegasus GMA; Mobil Pegasus 1; Mobil Pegasus GLX

Worthington

All models

Mobil Pegasus 801 SAE 30

Waukesha

VSG F11 (G, GSI, GSID)

Mobil Pegasus 1; Mobil Pegasus GMA; Mobil Pegasus 805; Mobil Pegasus GLX; Mobil Pegasus 710

VGF F18, H24, L36, P48 (G, GL, GLD/GLD2)


VGF F18, H24, L36, P48 (GSI, GSID)


VHP F2895, F3521, L5790, L7042, P9390 (G, GSI, GL)


VHP F3524, L5794, L5790 (GSI), L5774, L5794 (LT)


AT – All models (275GL/GL+ AT25/27 GL)


COMMERCIAL

Manufacturer

ENGER GREASES

28

AVIATION


MARINE

Please refer to OEM manual for lubricant recommendations or your Imperial sales representative.


INDUSTRIAL


INDUSTRIAL LUBRICANTS GAS ENGINE OILS Mobil SHC Pegasus™ 30 is a recently developed category of synthetic natural gas engine oil designed to provide today’s high output, low emission four-cycle gas engines with advanced levels of wear protection and fuel efficiency. Mobil SHC Pegasus 30 delivers high performance, long service life and improved productivity through a patented combination of high quality base stocks and advanced additive technology. The result is exceptional oxidation stability, nitration resistance and thermal stability, which may enable drain intervals to be extended by up to three times that SAE Product Grade Mobil SHC Pegasus 30

30


cSt at 100°C

V.I. ASTM D2270



65

10.5

162

-51

255

Mobil Pegasus™ 1 is a high performance synthetic gas engine oil designed to meet the highest performance requirements of some of the most demanding naturally aspirated and turbocharged stoichiometric and lean-burn gas engines. Formulated from wax-free SAE Product Grade Mobil Pegasus 1

15W-40

Mobil Pegasus GMA

40

Mobil Pegasus 805

40

5

0.5


cSt at 100°C

V.I. ASTM D2270



93.8

13.0

137

-48

238

TBN, mg KOH/g, Sulfated Ash, ASTM D2896 wt% ASTM D874 6.5

0.5

is 0.57 % mass. The balanced additive system provides excellent control of viscosity, oxidation and nitration. Mobil Pegasus GMA protects against varnish, corrosion, deposits and wear, while minimizing premature valve recession.


cSt at 100°C

V.I. ASTM D2270


115

13.2

110

-21

Mobil Pegasus™ 805 is a performance gas engine oil engineered to meet the rigorous demands of high output four-cycle engines designed to reduce emissions and improve fuel efficiency. Such engines generally operate under high load and high temperature conditions. The highest quality base stocks and an SAE Product Grade

TBN, mg KOH/g, Sulfated Ash, ASTM D2896 wt% ASTM D874

synthetic base oils and a balanced additive system, this oil delivers performance that is unattainable with conventional mineral oil based gas engine oils. Potential benefits Include longer engine and oil life, reduced maintenance and lower fuel costs.

Mobil Pegasus™ GMA, our low ash natural gas engine oil, is the prime recommendation for Caterpillar and Waukesha natural gas engines and is formulated to provide excellent performance through extended oil drain intervals. Typical sulphated ash SAE Product Grade

of conventional gas engine oils. Mobil SHC Pegasus 30 provides outstanding anti-wear performance to protect heavily loaded valve train components, pistons, liners, bearings, and gear trains while maintaining compatibility with catalytic converter materials. An effective detergent-dispersant system controls carbon and varnish deposits to minimize oil consumption and maintain engine cleanliness – even through extended drain intervals, which may result in lower operating and maintenance costs. For information on energy efficiency, please see page 7.

Flash Point, TBN, mg KOH/g, °C, ASTM D92 ASTM D2896 240

6

Viscosity, ASTM D445 Spec. Gravity cSt at V.I. TBN, mg KOH/g, kg/l at 15.6°C, 100°C ASTM D2270 ASTM D2896 ASTM D4052 13.5

0.57

advanced technology additive system combine to deliver exceptional oxidation stability, nitration resistance and thermal stability. An effective detergent and dispersant system controls carbon deposits, lacquer and sludge.

cSt at 40°C 130

Sulfated Ash, wt% ASTM D874

99


6.2

0.89

Sulfated Ash, wt% ASTM D874 0.5


GAS ENGINE OILS Mobil Pegasus™ GLX meets the requirements of most four-cycle high speed natural gas engines, including Superior and Waukesha VSG, VGF, VHP and AT. The medium ash additive system protects

Mobil Pegasus GLX

40


cSt at 100°C

V.I. ASTM D2270



127

13.2

95

-18

250

Mobil Pegasus™ 710 is a performance gas engine oil intended primarily for modern high speed four-cycle engines where oil consumption is very low and where increased manifold pressures may keep some lubricants from reaching the valve guide areas in sufficient quantities. This oil is also recommended for

Mobil Pegasus 710

40

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at V.I. TBN, mg KOH/g, kg/l at 15.6°C, 40°C 100°C ASTM D2270 ASTM D2896 ASTM D1298 121

13.2

98

40

6.5

0.896

Sulfated Ash, wt% ASTM D874 1.0

recession, increasing the potential for upper cylinder components being attacked by acidic materials generated through combustion. Mobil Pegasus 610 is a 1.0% ash, high TBN gas engine oil with exceptional reserve alkalinity to offset the negative effects of corrosive materials on engine components. This protection extends to cylinders, valve areas and bearings resulting in long engine life and low maintenance costs.


cSt at 100°C

V.I. ASTM D2270



TBN, mg KOH/g, ASTM D2896


130

13.8

102

-18

264

8.6

1.0

MARINE

Mobil Pegasus 610

0.8

gas compressors. High quality mineral base oils and an advanced medium ash additive system provide excellent protection of engine and compressor components. Mobil Pegasus 710 delivers effective detergency and dispersancy, along with chemical stability and resistance to oxidation, nitration, valve train wear and deposits.

Mobil Pegasus™ 610 is a high performance natural gas engine oil intended primarily for modern medium and high speed four-cycle engines operating on fuel containing corrosive materials such as hydrogen sulphide or halogens (compounds containing chlorine, fluorine, etc.). In these typically lean-burn engines increased manifold pressures can prevent sufficient lubricant from reaching the valve guide areas. This often leads to accelerated valve guide wear and valve SAE Product Grade

6.0

ENGER

SAE Product Grade


COMMERCIAL

SAE Product Grade

against piston scuffing, cylinder wear, corrosion and deposits. The formulation leaves a cushioning ash to help control valve recession. Phosphorous content is low enough for catalyst exhaust systems.

INDUSTRIAL


AVIATION


30

GREASES


INDUSTRIAL LUBRICANTS GAS ENGINE OILS Mobil Pegasus™ 605 is a high performance natural gas engine oil primarily intended for modern medium and high speed four-cycle engines operating on fuel that contains corrosive materials such as hydrogen sulphide or such halogens as chlorine, fluorine or bromine. Exceptional reserve alkalinity helps offset the negative effects of acidic materials on engine components. Excellent corrosion protection helps prevent corrosive wear in cylinders, valve areas and bearings, promoting long engine life and low maintenance costs. SAE Product Grade Mobil Pegasus 605

40


cSt at 100°C

V.I. ASTM D2270



120

13.2

104

-15

246

Mobil Pegasus™ 801 Series is a performance gas engine oil intended for the lubrication of all classes of gas engines operating at low, medium and high speeds where low ash or ashless oils are recommended. It provides outstanding engine cleanliness and performance by preventing the formation of carbon and ash deposits on pistons, in ring belt areas, on exhaust and intake ports, on valves and valve stems and in com SAE Product Grade Mobil Pegasus 801 Mobil Pegasus 801 SAE 30

40 30

Mobil Pegasus AGX

40


132 85

13.2 10.0

0.5

bustion chambers. Mobil Pegasus 801 – SAE 30 also reduces the potential for port carboning of two-cycle gas engines. It helps minimize engine wear and protect valve faces, seats and guides of turbocharged four-cycle engines. Mobil Pegasus 801 – SAE 30 provides exceptional protection against scuffing in demanding engine applications and also provides excellent protection against corrosion of internal engine components.

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at V.I. TBN, mg KOH/g, kg/l at 15.6°C, 40°C 100°C ASTM D2270 ASTM D2896 ASTM D1298 97 97

Mobil Pegasus™ AGX employs a highly effective ashless anti-wear additive to guard against ring and liner wear and cylinder scuffing. Ashless detergent/dispersant additives deliver excellent control over sludge SAE Product Grade

Excellent deposit control helps prevents siloxane deposits and liner laquering in biofuel and landfill gas applications with high silicon content. Preventing these deposits is a key step in controlling lube oil consumption. Mobil Pegasus 605 can be used for the lubrication of the reciprocating compressors in landfill, mine, coal seam, digester/fermenter, sewage and other biomass gas operations in municipal, industrial, cooperative and farm applications, including electric power generation, boiler heating, cogeneration/combined heat and power.

2.8 2.8

– 0.882

Sulfated Ash, wt% ASTM D874 0.1 0.1

and varnish deposits, including carbon in the ports. It is formulated with an inherently oxidation-resistant paraffinic base oil with potent anti-wear agents to guard against wear, particularly in rings, liners and cylinders.


cSt at 100°C

V.I. ASTM D2270



135

13.5

95

-21

250


0.04

Additional Gas Engine Oils Mobil Delvac™ CNG/LNG 15W-40............................. 62 Mobil GEO™ 15W-40................................................. 62



GAS ENGINE OILS

Imperial Engine Recommendation – How to Select the Right Oil % SASH

Ashless

0.13

Mobil Pegasus™ AGX

Ashless

0.03

Mobil SHC Pegasus™ 30

Low Ash

0.50

Mobil Pegasus™ 605

Low Ash

0.52


Low Ash

0.54

Mobil Pegasus™ 1

Low Ash

0.54

Mobil Pegasus™ GMA

Low Ash

0.57

Mobil GEO™ 15W-40

Low Ash

0.54


Medium Ash

0.98


Medium Ash

0.94

Mobil Pegasus™ GLX

Medium Ash

0.80

MARINE


ENGER

Category

COMMERCIAL

Natural Gas Engine Oil

INDUSTRIAL


AVIATION


32

GREASES


INDUSTRIAL LUBRICANTS GEAR OILS — ENCLOSED GEARS Mobil SHC Gear™ Series (ISO VG 150-1000) lubricants are recognized around the world for innovation and outstanding performance. These synthetic products are designed to provide outstanding protection of gears and bearings, and extended oil life even under extreme conditions. This promotes problem-free operation of equipment and increased productivity. Synthetic base fluids with exceptional oxidation and thermal properties deliver excellent low temperature fluidity. The high viscosity index of these oils means less change in viscosity as temperatures change, enabling a wider operating temperature range and improved low Product ISO VG Mobil SHC Gear 150 Mobil SHC Gear 220 Mobil SHC Gear 320 Mobil SHC Gear 460 Mobil SHC Gear 680 Mobil SHC Gear 1000

150 220 320 460 680 1000


cSt at 100°C

V.I. ASTM D2270



150 220 320 460 680 1000

22.2 30.4 40.6 54.1 75.5 99.4

176 180 181 184 192 192

-54 -45 -48 -48 -42 -33

233 233 233 234 234 234

Mobil SHC Gear™ 1500, 3200, and 6800 are high performance heavy duty gear oils primarily designed for enclosed gearing as well as slow speed plain and rolling element bearings. They are designed to provide outstanding service in of equipment protection, oil life, and problem-free operation enabling increased customer productivity. These scientifically engineered synthetic lubricants are formulated from synthetic base fluids that have exceptional oxidation and thermal properties and excellent low temperature fluidity. The combination of a naturally high viscosity index and a unique additive system enables these Product ISO VG Mobil SHC Gear 1500 Mobil SHC Gear 3200 Mobil SHC Gear 6800

1500 -- --

temperature startup. An advanced proprietary additive system provides excellent protection against scuffing and a high level of resistance against micropitting fatigue. Mobil SHC Gear Series oils have outstanding EP properties that protect even under shock load conditions. The synthetic base stocks have inherently low traction properties, resulting in low fluid friction in the load zone of non-conforming surfaces, such as gears and rolling element bearings. Reduced fluid friction also produces lower operating temperatures and improved gear efficiency. For information on energy efficiency, please see page 7. FZG Scuffing, FZG Scuffing, ISO 14635-1 (mod) ISO 14635-1 (mod) A/8.3/90, Fail Stage A/16.6/90, Fail Stage 13 14 14 14 14 14

Not tested >14 >14 >14 >14 >14

products to provide outstanding performance under severe high and low temperature operating conditions. The nature of the synthetic base fluids also contributes to the products’ excellent low temperature performance. They have excellent protection against gear scuffing and resistance to shock loading. The synthetic base stocks have inherently low traction properties that result in low fluid friction in the load zone of nonconforming surfaces such as gears and rolling element bearings. Reduced fluid friction produces lower operating temperatures and improved gear efficiency.


cSt at 100°C

V.I. ASTM D2270



FZG test, ISO 14635-1 mod., Failure Stage

1500 3200 8200

113 183 365

165 165 180

-18 -9 -6

230 230 230

13+ 13+ 13+



GEAR OILS — ENCLOSED GEARS

Product Mobilgear 600 XP 68 Mobilgear 600 XP 100 Mobilgear 600 XP 150 Mobilgear 600 XP 220 Mobilgear 600 XP 320 Mobilgear 600 XP 460 Mobilgear 600 XP 680

trends toward smaller units with similar power throughput. This increase in power density places increased demands on lubricant. Mobilgear 600 XP Series oils meet the stress by providing extra protection for gears, bearings and seals.


cSt at 100°C

V.I. ASTM D2270



68 100 150 220 320 460 680

8.8 11.2 14.7 19.0 24.1 30.6 39.2

101 97 97 97 97 96 90

-27 -24 -24 -24 -24 -15 -9

230 230 230 240 240 240 285

12+ 12+ 12+ 12+ 12+ 12+ 12+

– 12+ 12+ 12+ 12+ 12+ 12+

bility and excellent protection from wear. The thermal stability of SPARTAN EP-C helps reduce sludge formation and keep internal surfaces clean. SPARTAN EP-C oils provide excellent protection against corrosion of steel and copper containing alloys. They also have excellent demulsibility, so that water separates rapidly from the oil, simplifying drain off from gear cases and system reservoirs.

ENGER

SPARTAN™ EP-C is the brand name for a family of quality industrial extreme pressure gear lubricants. They are formulated with high quality mineral oils and carefully selected high performance additives that work synergistically to provide excellent gear protection and long lubricant life. SPARTAN EP-C oils contain a sulphur/phosphorus Extreme Pressure additive system that provides high load-carrying capa-

FZG scuffing, FZG scuffing, Fail Stage A/8.3/90 Fail Stage A/16.6/90

COMMERCIAL

Mobilgear™ 600 XP Series high performance gear oils have excellent extreme pressure characteristics and load-carrying properties. They are intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. These oils are designed to stay ahead of gearbox technology, including design

INDUSTRIAL


Kinematic Viscosity cSt at V.I. Pour Point, Flash Point, 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92

cSt at 40°C

Spartan All-Season Spartan 1000

150 1000

21.5 47.5

170 90

-36 -9

192 246

MARINE

Product

Additional Enclosed Gears Mobil SHC™ 600 Series............................................ 19

AVIATION


34

GREASES


INDUSTRIAL LUBRICANTS GEAR OILS — ENCLOSED GEARS SPECIALTY Mobil SHC™ Gear OH Series. These exceptional performance synthetic gear oils are primarily designed to lubricate enclosed gears and plain and rolling element bearings in off-highway equipment subject to shock and heavy loading. They provide outstanding equipment protection, oil life and problem-free operation, promoting increased productivity. The synthetic base fluids deliver exceptional oxidation and thermal properties and excellent low temperature fluidity, contributing significantly to low temperature performance. Synthetic base stocks have inherently low traction properties that result in low fluid friction in the load zone of non-conforming Product ISO VG Mobil SHC Gear OH 320 Mobil SHC Gear OH 460 Mobil SHC Gear OH 680

320 460 680

Kinematic Viscosity, Viscosity, ASTM D445 FZG Gear Scuffing, cSt at 40°C

cSt at 100°C

V.I. ASTM D2270



(A/8.3/90), ISO 14635-1 mod Failure Stage

320 460 680

40.1 54.9 76.1

178 186 193

-45 -42 -39

233 233 233

>13 >13 >13

Mobilgear SHC™ XMP Series lubricants are high performance synthetic wind turbine gear oils providing outstanding equipment protection and oil life, even under extreme conditions. Our synthetic base oil technology provides exceptional oxidation resistance and thermal properties, naturally high viscosity index, excellent low temperature fluidity and the absence of undesirable compounds often found in mineral oils. A high viscosity index and low traction coefficient Product ISO VG Mobilgear SHC XMP 320

320

surfaces such as gears and rolling element bearings. Reduced fluid friction produces lower operating temperatures and improved gear efficiency. A naturally high viscosity index and unique additive system combine to provide outstanding performance under severe high and low temperature operating conditions. Mobil SHC Gear OH Series oils deliver outstanding gear scuffing protection in heavily loaded gearboxes. Their available viscosity range: ISO VG 320 to 680. These are the products of choice for key OEMs and customers with demanding off-highway applications. For information on energy efficiency, please see page 7.

combine for a significant reduction in power consumption in many gear drives. An advanced proprietary additive system helps prevent conventional wear such as scuffing and provides high resistance to micropitting fatigue. Mobilgear SHC XMP oils deliver outstanding rust and corrosion protection and show no tendency to plug fine filters even when wet. Compatibility with ferrous and non-ferrous metals, even at elevated temperatures, is excellent.


cSt at 100°C

V.I. ASTM D2270



Spec. Gravity kg/l at 15.6°C, ASTM D4052

FZG Scuffing, DIN 51345 (mod) A/16.6/90, Fail Stage

335

38.3

164

-38

242

0.860

14+

Mobil Glygoyle™ Series lubricants are high performance gear, bearing and compressor oils delivering outstanding efficiency, long oil life, and equipment protection. These synthetic polyalkylene glycol (PAG)

oils were designed for operating conditions beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent lowtemperature fluidity.


Product ISO VG

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270



FZG Test, ISO. Fail Load Stage

Mobil Glygoyle 460

460.0

77.2

250

-33

265

12+

460



GEAR OILS — ENCLOSED GEARS SPECIALTY Mobil Iogear™ EP 100 is an extreme pressure gear oil specially designed for oil field pump jack gear drives and formulated to operate across a wide temperature


SAE Product Grade 100

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270



99.5

14.96

157

-40

170

Additional Enclosed Gears Specialty Mobil SHC Cibus™ Series......................................... 27


COMMERCIAL

Mobil IOGear EP 100

range for year-round performance. It is well suited for other gear applications requiring excellent low temperature performance.

INDUSTRIAL


GEAR OILS — OPEN GEARS high viscosity index and unique additive system combine to provide exceptional thermal/oxidative properties and outstanding performance under severe high and low temperature operating conditions, even with very slow moving gears. The additive formulation also provides excellent gear scuffing protection, antiwear performance and rust and corrosion inhibition.


Product

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270



Mobil SHC Gear 46M

46,000

1375

180

15

240

Product

consistency that is maintained throughout its service life. Mobiltac 375 NC adheres strongly to gear teeth and other machine elements to resist excessive throw-off, providing a wear resistant, viscous, continuous film that lubricates well under boundary conditions. Mobiltac 375 NC is available in spray cans. Spec. Gravity Flash Point, kg/l at 15.6°C, °C, ASTM D92 ASTM D1298

cSt at 40°C w/diluent

cSt at 100°C w/o diluent

5000

1260

Mobil Geargard™ HVS is an ultra-high viscosity lubricant primarily intended for heavily loaded, low and medium speed open gears that may operate in boundary lubrication conditions. The ultra-high viscosity synthetic fluid combines with extreme pressure additives

135

Smooth


110

Viscosity, ASTM D445 cSt at 40°C without diluent

cSt at 100°C without diluent

44000

1350


36

GREASES

Black

0.96

to provide outstanding performance under severe conditions. Geargard HVS dispenses well in ambient temperatures as low as -10°C, while providing excellent gear protection at high operating temperatures.

Colour, Flash Point,°C Product Visual Structure with diluent Mobil Geargard HVS

0.924

AVIATION

Mobiltac 375 NC



MARINE

Mobiltac™ 375 NC is an high performance non-leaded, diluent-type, heavy bodied open gear lubricant designed for a wide variety of open gear and mining applications. A non-chlorinated, volatile solvent ensures fluidity during application, even at low temperatures. Once applied, the diluent evaporates and the lubricant takes on a flexible, adhesive, high strength

ENGER

Mobil SHC Gear™ 46M is a high performance ultra high viscosity synthetic lubricant designed specifically for heavily loaded, low speed open gears where boundary lubrication conditions often prevail. Synthetic base stocks provide remarkable low temperature fluidity; they can be pumped over relatively long distances and applied with standard spray equipment. The naturally

INDUSTRIAL LUBRICANTS HEAT TRANSFER FLUIDS Mobiltherm™ and Thermoil™ heat transfer fluids offer many years of successful service in such industries as plastics, paint, rubber, paper mill calendars, board plants, roofing, textiles and refineries. Highly refined


Product ISO VG Mobiltherm N 100 Thermoil 32 Thermoil 46 Thermoil 100

mineral base stocks and select additive technology combine for excellent thermal and oxidation stability. The volatility and flash points are optimized to reduce vapour pressure at elevated temperatures.

100 32 46 100

cSt at 40°C

cSt at 100°C



108 32 46 100

11.8 5.31 6.67 10.78

-18 <-24 <-24 <-12

261 205 212 252

INDUSTRIAL LUBRICANTS HYDRAULIC FLUIDS Mobil SHC™ 500 Series are our highest performance hydraulic oils and have the widest temperature range capability. These synthetic fluids have exceptional shear-stability and wear protection and are designed for extended service in high pressure, high temperature vane, piston and gear pump applications where


Product ISO VG Mobil SHC 524 Mobil SHC 525 Mobil SHC 526 Mobil SHC 527

sustained lubrication excellence is critical to productivity. Their superb low and high temperature properties enable extraordinary low temperature pumpability and startup, and ensure outstanding equipment protection at extremely high temperatures. For information on energy efficiency, please see page 7.

32 46 68 100

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270



32 46 68 100

6.4 8.54 11.52 15.94

144 154 158 160

-56 -54 -53 -52

234 238 240 243

Mobil DTE 10 Excel™ Series hydraulic oils deliver superb performance and energy efficiency. These ashless non-zinc oils are intended for high speed, high pressure, high output piston, vane and gear pumps

operating under severe conditions where high levels of anti-wear, film strength and high temperature protection are needed. For information on energy efficiency, please see page 7.

Brookfield Viscosity, ASTM D445 Viscosity, ASTM D2983 Product ISO VG

cSt at I40°C

cSt at 100°C

V.I. ASTM D2270



at -20°C

at -20°C

at -40°C

Dielectric Strength, kV, ASTM D877

Mobil DTE 10 Excel 15 Mobil DTE 10 Excel 22 Mobil DTE 10 Excel 32 Mobil DTE 10 Excel 46 Mobil DTE 10 Excel 68 Mobil DTE 10 Excel 100

15.8 22.4 32.7 45.6 68.4 99.8

4.07 5.07 6.63 8.45 11.17 13.00

168 164 164 164 156 127

-54 -54 -54 -45 -39 -33

182 224 250 232 240 258

– – 1090 1870 3990 11240

– – 3360 7060 16380 57800

2620 6390 14240 55770 – –

45 54 49 41 – –

15 22 32 46 68 100



HYDRAULIC FLUIDS Mobil DTE™ 20 Series oils are performance anti-wear hydraulic oils that meet the stringent requirements of hydraulic systems with high pressure, high output pumps. Since they meet the rigorous

Mobil DTE 24 Mobil DTE 25 Mobil DTE 26

32 46 68


cSt at 100°C

V.I. ASTM D2270




31.5 44.2 71.2

5.29 6.65 8.53

98 98 98

-27 -27 -21

220 232 236

0.871 0.876 0.881

temperature fluidity of an ISO VG 22. The all-weather performance of Mobil Univis Ultra makes it the ideal choice for stationary and mobile equipment in such outdoor applications as oil and gas, mining, forestry and construction.


Product

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270



Mobil Univis Ultra

43.1

10.42

242

-54

196

Mobil Univis Extra

N-C line and provides outstanding oxidation resistance, rust protection, demulsibility and foam control. It is well suited for most pump types, including vane, axial piston, radial piston and gear. This oil is recommended for a variety of equipment operating over a wide range of temperature, simplifying lube inventory by reducing the number of fluids required.


cSt at 100°C

V.I. ASTM D2270



32.8

7.6

213

-50

170

MARINE

Mobil Univis™ Extra is a multigrade hydraulic oil recommended for extreme climatic conditions. It delivers the same outstanding low temperature performance as an ISO 22 grade oil along with excellent protection at high temperatures, similar to an ISO 32 grade product. Mobil Univis Extra exhibits the excellent wear-protection characteristics of the popular Univis Product

ENGER

Mobil Univis™ Ultra is a all-season, multigrade hydraulic fluid that delivers excellent pumpabilitty at extremely low temperatures and excellent protection at all operating temperatures. It combines the high temperature viscosity characteristics of an all-season ISO VG 46 hydraulic oil with the outstanding low

COMMERCIAL

Product ISO VG

requirements of a wide range of hydraulic system and component manufacturers, these oils may simplify lubricant inventory by enabling the use of a single product with outstanding performance characteristics.

INDUSTRIAL


AVIATION


38

GREASES


INDUSTRIAL LUBRICANTS HYDRAULIC FLUIDS Mobil Univis™ N-C Series. High viscosity indexes and low pour points help ensure cold weather pump startups while maintaining oil viscosity at high ambient temperatures. A highly effective anti-wear additive protects hydraulic pumps even in severe-service applications employing high pressure axial and radial piston Product Mobil Univis N-C 15 Mobil Univis N-C 22 Mobil Univis N-C 32 Mobil Univis N-C 46 Mobil Univis N-C 68


cSt at 100°C

V.I. ASTM D2270



15 22 32 46 68

3.9 5.1 6.6 8.2 10.7

140 140 140 140 140

-54 -51 -48 -45 -42

150 156 204 218 226

Mobil Univis™ HVI 13 is a quality low viscosity hydraulic oil with an exceptionally high viscosity index. Because of its resistance to viscosity change with temperature, this fluid is highly recommended for equipment subject to wide swings in temperature. Applications include hydrostatic transmissions and fluid systems, such as those of numerically controlled lathes Product Mobil Univis HVI 13

Mobil Univis BIO-C 40

and automatic screw machines. Mobil Univis HVI 13 can also lubricate fine instruments and other mechanisms where power input is limited and where increases in torque due to lubricant thickening cannot be tolerated. Other features include excellent lubrication, long-lasting oxidation stability and a very low pour point.


cSt at 100°C

V.I. ASTM D2270


13.5

5.3

404

-60

Mobil Univis™ BIO-C 40 is a non-toxic, biodegradable vegetable oil based hydraulic oil developed to meet growing global demand for more environmentally friendly lubricants. It is well suited for applications Product

pumps. Mobil Univis N-C also delivers excellent rust protection, good demulsibility, oxidation resistance and anti-foam properties. Excellent all-season performance can enable operators to standardize to one viscosity grade for year-round service, simplifying lube inventory by reducing the number of fluids required.


demanding a high performance, anti-wear fluid in woodland, construction, mining, marine and other applications facing critical environmental concerns.


cSt at 100°C

V.I. ASTM D2270



43

9.7

200

< -36

>200



HYDRAULIC FLUIDS

Product ISO VG Mobil Nuto H 32 Mobil Nuto H 46 Mobil Nuto H 68 Mobil Nuto H 100 Mobil Nuto H 150

32 46 68 100 150


cSt at 100°C

V.I. ASTM D2270



32 46 68 100 150

5.4 6.7 8.5 11.1 14.6

104 104 107 95 95

-36 -30 -30 -27 -24

212 226 234 242 258

Forum EP 46 Forum EP 68

46 68

pressure (EP) characteristics enable these fluids to the rigorous Brugger load-carrying test, as required for Mueller Weingarten presses. The balanced additive system also delivers effective foam and air release, oxidation control and demulsibility.

ENGER

Forum™ EP 46 and 68 are high performance hydraulic and circulating oils developed for hydraulic presses made by Mueller Weingarten, Voith-Vorecon and Pahnke. These oils can also be used in other applications requiring highly effective unique loadcarrying properties. Enhanced anti-wear and extreme Product ISO VG

stability, promoting long oil life and minimal deposits in severe-service hydraulic systems and high pressure, high output pumps. Anti-wear performance is excellent. Highly effective foam and air release properties help prevent erratic operation, high temperatures, wear, cavitation damage and micro dieseling associated with foam and air entrainment.

COMMERCIAL

Mobil Nuto™ H Series. These high performance anti-wear hydraulic oils are specifically designed for modern high pressure mobile and stationary hydraulic systems. quality base oils and high performance additives work synergistically to deliver well balanced performance for a wide range of applications. All viscosity grades exhibit good oxidation and thermal

INDUSTRIAL



cSt at 100°C

V.I. ASTM D2270



46.1 66.9

6.9 8.8

105 103

-30 -24

214 228

MARINE

Additional Hydraulic Fluid Mobil SHC Cibus™ Series......................................... 27 Mobil DTE™ FM Series.............................................. 27

AVIATION


40

GREASES


INDUSTRIAL LUBRICANTS HYDRAULIC FLUIDS — LESS FLAMMABLE Mobil Nyvac™ FR 200D is an high performance water-glycol type less flammable hydraulic fluid. It is formulated with diethylene glycol as the main glycol component. This product does not contain ethylene glycol. It delivers excellent protection against rust and vapour phase corrosion. In hydraulic pump tests, Product Mobil Nyvac FR 200D

it has shown a high level of anti-wear performance. A high viscosity index makes Mobil Nyvac FR 200D effective over a wide range of operating temperatures. Foam resistance, low temperature flow and storage stability are also excellent.


V.I. ASTM D2270


41.5

175

-30

Mobil Pyrogard™ 53 is a high performance phosphate ester synthetic fluid designed to replace petroleum based oils in hydraulic applications where


1.089

conditions preclude the use of combustible petroleum products. Mobil Pyrogard 53 is approved by Factory Mutual (FM) as a less flammable fluid.

Product

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at Pour Point, Flash Point, kg/l at 15.6°C, 40°C 100°C °C, ASTM D97 °C, ASTM D92 ASTM D1298

Mobil Pyrogard 53

41.8

5.1


0

246

1.155


METALWORKING FLUIDS Mobilmet™ 420 Series products are high performance multi-purpose cutting oils. They are chlorine-free, non-staining and non-corrosive oils for ferrous and non-ferrous metals. They are designed for light to moderate duty cutting operations and are also suitable

Mobilmet 426 Mobilmet 427

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at Pour Point, Flash Point, kg/l at 15°C, 40°C 100°C °C, ASTM D97 °C, ASTM D92 ASTM D4052 32 46

5.7 6.9

-12 -10

cSt at 40°C

Mobilmet 762 Mobilmet 763 Mobilmet 766

10.0 18.0 36.0

3.0 4.0 6.0

140 160 180

Product Colour, ASTM 2.0

0.87 0.87 0.88

1.6 1.6 1.6

a small concentration of biocide to guard against deterioration in storage. These properties make Mobilcut 100 a versatile fluid well suited to many machining applications.

Density Emulsion Pour Point, @ 15ºC (kg/L) Stability °C, ASTM D97 0.89

Sulfur, Active

Excellent

-6

MARINE

Mobilcut™ 100 is a soluble cutting and cooling fluid suitable for a number of machining and grinding operations. Select mineral oil base stocks are blended with an additive system that includes a highly effective and stable emulsifier, a potent rust protection package and

Mobilcut 100

control of built-up edge. Their light color enables the work area to be seen at all times. Closer tolerances are consistently achieved. These oils are formulated to prevent the formation of oil mist in the vicinity of the machine tool, contributing to a safer, more pleasant, work environment.

Kinematic Viscosity Spec. Gravity cSt at Flash Point, kg/l at 15°C, 100°C °C, COC, ASTM D92 ASTM D4052

Product

0.874 0.877

ENGER

Mobilmet™ 760 Series high performance oil based cutting oils are chlorine-free and intended for severe cutting operations, especially on difficult-to-machine steels. The active cutting oil technology is corrosive to copper and its alloys. In comparison with other leading cutting oils, these oils have demonstrated outstanding surface finish, extended tool life and

194 198

COMMERCIAL

Product

as machine tool lubricants and for use in light duty hydraulic systems. These oils are light in colour and transparent so the work area can be seen at all times. Mobilmet 420 Series oils are formulated to prevent the formation of oil mist in the vicinity of the machine tool.

INDUSTRIAL


Viscosity, ASTM D445 cSt at 40°C 35

AVIATION


42

GREASES


INDUSTRIAL LUBRICANTS METALWORKING FLUIDS Mobilcut™ 140 is a long-life, biostable, chlorine-free high performance metalworking fluid. When mixed with water the emulsion formed has a milky appearance. Product Appearance Mobilcut 140

Amber Liquid

Spec. Gravity kg/l at 20°C, ASTM D4052 Emulsion Type 0.95

Milky

Mobilcut™ 350 is a fully biostable, mineral oil-free synthetic metalworking fluid. It is specially formulated for grinding and general cutting operations of ferrous materials. Mobilcut 350 is a carefully balanced product Product Appearance Mobilcut 350

Amber Liquid

1.10

Product Formesso Summer Grade

pH at 3% Emulsion

Corrosion Test (IP 287) Breakpoint %

Refractometer Correction Factor

9.1

3.0

1.0

designed to provide excellent machining performance, long charge life and excellent tramp oil rejection properties. Mobilcut 350 is a universal product that meets the exacting demands of modern machine shops.

Spec. Gravity kg/l at 15°C, ASTM D4052 Emulsion Type

Formesso™ Summer Grade is a high quality metalforming fluid primarily recommended for bolt forming and general purpose machining, and automatic machine tools processing free machining steels in light to moderate applications. This fluid provides anti-wear and lubricity properties, resistance to

Mobilcut 140 is formulated with high levels of lubricity additives to provide excellent performance in arduous machining operations.

Clear Solution

pH at 3% Emulsion

Corrosion Test (IP 287) Breakpoint %

Refractometer Correction Factor

9.1

3.0

1.9

foaming and oxidation and corrosion protection. It also contains an oiliness agent and minimizes smoke formation during the bolt-forming and threading operations. Being non-corrosive, Formesso Summer Grade fluid is particularly suitable for the machining of copper and its alloys.

Spec. Gravity kg/l at 15°C, ASTM D4052



0.880

250

-15




MIST OILS

Product Mobilgear MS 100 Mobilgear MS 320 Mobilgear MS 460

The products have enhanced surface wetting capabilities and they reclassify (or agglomerate) readily from a mist to a liquid when the mist is subjected to extreme turbulence or is impinged onto a surface at high velocity. This allows a lubricating film to form on bearings and gears and prevents stray mist from escaping through narrow apertures into the atmosphere.

Viscosity, ASTM D445 FZG Scuffing, cSt at 40°C

cSt at 100°C

V.I. ASTM D2270



100 320 460

11.2 25 31.5

95 100 100

-12 -9 -6

234 230 238

DIN 51534 A/8.3/90, Fail Stage 12+ 12+ 12+

COMMERCIAL

Mobilgear™ MS Series (formerly Mobil Mist Lube) are high performance oils designed for the oil-fog or mist lubrication of machine components such as slideways, bearings, gears, chains etc. They are formulated from high quality, solvent refined base stocks and a unique additive system designed for optimum reclassifying properties. They have a high resistance to oxidation and good extreme pressure and anti-wear properties.

INDUSTRIAL


ENGER MARINE AVIATION


44

GREASES


INDUSTRIAL LUBRICANTS OTHER INDUSTRIAL OILS Canthus™ 680 is a high viscosity straight mineral oil for economical lubrication of heavy industrial machinery. It is primarily recommended for heavy slow-moving components of enclosed gear units and circulation systems requiring an uncompounded oil of high viscosity. This oil has excellent demulsibility and good natural Product ISO VG Canthus 680

680


cSt at 100°C

V.I. ASTM D2270



694

36.9

83

-9

280

Faxam™ paraffinic process oils are manufactured to ISO-grade viscosity limits with lower pour points for improved low temperature performance. They are well suited to a wide range of industrial and process oil applications and can be used as lubricants in non-critical circulating oil and hydraulic systems where bulk oil temperatures are moderate and operating pressures low enough that anti-wear/extreme pressure additives are not required. These oils are an economic choice Product ISO VG Faxam 22E Faxam 32

22 32

Mobil Sawguide Oil 68 Mobil Sawguide Oil 100 Mobil Sawguide Oil 150

68 100 150

where high leakage cannot be avoided. As process oils, their physical characteristics make them suitable as a diluent oil or carrier in the manufacture of such products as lubricating oil additives, paper defoamants, seals, carbon paper and other chemical formulations. Faxam oils can also be used for leather tanning, as fluids for mineral oil seals, autoclaves and dust suppression, or as lubricant-blending bases or glass mould release agents.




Colour, ASTM

22 32

-36 -15

205 217

1.0 0.5

Mobil™ Sawguide Oils are designed to lubricate the thin blades of modern gang saws and edgers. They exhibit excellent anti-wear and extreme pressure properties and cling tenaciously to blade and guide surfaces, promoting extended blade life and reduced oil consumption. These oils control pitch and resin build-up on blades and sawguides, resulting in lower Product ISO VG

oxidation stability. As an uncompounded steam cylinder oil, Canthus 680 separates readily from condensate and is suitable for use with dry steam or where water washing off cylinder walls is not detrimental to lubrication. It can also be employed as a heat transfer oil, tempering oil and forging compound.

friction and wear and increased cutting efficiency. Potent rust and corrosion inhibitors help protect blade surfaces from rust that can stain lumber. Tackiness additives help reduce the oil thrown off or blown off by air/water sprays. Most importantly, a friction reducing film reduces cooling water requirements, promoting drier sawdust.


cSt at 100°C



68 91 150

9.6 11.5 16.2

-30 -24 -15

215 225 225



OTHER INDUSTRIAL OILS


Product ISO VG Mobil Synthetic Oven Lube 1090

synthetic ester base fluid plus very effective anti-wear additives. It does not contain silicone. Compared to mineral oil and conventional chain lubricants, Mobil Synthetic Oven Lube 1090 reduces carbon build-up and extends cleaning intervals.

cSt at 40°C

220

cSt at 100°C Viscosity Index

210

22

Mobil Synturion™ 6 is a quality synthetic base fluid specially formulated to meet the demanding lubrication and cooling requirements of mechanical seals – and to maximize seal life. The outstanding

Mobil Synturion 6

126

inherent properties of the synthetic base oil, enhanced by a proprietary additive package, are ideally suited to the demanding requirements of mechanical seal operation. Meets NSF H1 (USA) for food industries.

Viscosity, ASTM D445 Spec. Gravity,

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270



5.2

1.89

135

-63

168

Mobil™ System Cleaner is an oil-soluble, solvent-free cleaner fortified with emulsifiers, dispersants, and rust inhibitors. A 5% concentration in the system oil is typically recommended. Mobil System Cleaner is safe for all ferrous and non-ferrous metals used in

Slurry Oil 62 is a conditioning oil used in the manufacture of various types of explosives made with ammonium nitrate. This product has a low viscosity for optimal

kg/l at 15ºC, ASTM D4052 0.799

280.4 (138)

Spec. Gravity, kg/l at 15ºC, ASTM D4052 0.926

MARINE

55

industrial equipment and is compatible with all seals with up to 20% maximum concentration in the oil. The viscosity and high flash point of Mobil System Cleaner enable equipment to be operated normally during the cleaning process.

Viscosity, ASTM D445 cSt at Flash Point, Product 40°C °C, ASTM D92 Mobil System Cleaner

240

ENGER

Product


COMMERCIAL

Mobil™ Synthetic Oven Lube 1090 is a high performance synthetic high temperature lubricant designed specifically for lubrication of hot conveyor chains in drying ovens and similar severe applications. This formulation combines a carefully balanced blend of high-molecular-weight synthetic hydrocarbons and

INDUSTRIAL


hydrocarbon loading and a low pour point for all-season use. The low temperature properties also facilitate handling and transfer at low ambient temperatures.

Viscosity, ASTM D445 cSt at Pour Point, Flash Point, Product 40°C °C, ASTM D97 °C, ASTM D92 10.1

160


46

GREASES


-45

AVIATION

Slurry Oil 62

INDUSTRIAL LUBRICANTS PAPER MACHINE OILS Mobil SHC™ PM Series high performance synthetic lubricants are specifically designed for some of the most demanding industrial paper machine circulating systems. They deliver exceptional lubrication characteristics not attainable with conventional mineral-oil based fluids. These oils provide maximum protection for gears and bearings operating under some of the most severe conditions. Their very low pour points and naturally high viscosity index (VI) Product ISO VG Mobil SHC PM 220 Mobil SHC PM 320

220 320


cSt at 100°C

225 325

25.6 34.7

Mobil DTE™ PM Series oils are specifically designed for demanding industrial paper machine circulating systems. They are engineered to provide exceptional lubrication qualities while protecting system components from rust and corrosion. This is particularly important in the wet-end where water and chemical contaminants can enter the lubrication system. They Product ISO VG Mobil DTE PM 150 Mobil DTE PM 220 Mobil DTE PM 320

150 220 320

help ensure good low temperature performance and startup while maintaining excellent viscosity characteristics at very high temperatures. The fluids are very shear-stable and maintain viscosity control even when subjected to severe mechanical shear in heavily loaded bearings and gears. Their low traction coefficient and high viscosity index promote lower energy consumption and reduced component operating temperatures. V.I. Spec. Gravity ASTM D2270, Pour Point, Flash Point, kg/l at 15.6°C, typical °C, ASTM D97 °C, ASTM D92 ASTM D1298 127 130

-36 -33

220 220

0.863 0.865

exhibit good viscosity characteristics, allowing reduced startup to production times while maintaining excellent viscosity characteristics at high temperatures. They provide excellent resistance to oxidation and thermal degradation, exceptional protection against rust and corrosion, and a high level of anti-wear performance.


cSt at 100°C

V.I. ASTM D2270




150 220 320

14.7 19.0 25.4

95 min 95 min 95 min

-6 -6 -6

250 260 250

0.888 0.889 0.892



PNEUMATIC TOOL OILS to absorb moisture from the wet mine air system, while maintaining a protective film on drill components. Potent EP characteristics help protect components subjected to percussive for improved drill life in heavily loaded equipment. The high viscosity indexes and low pour points help ensure effective lubrication at high and low operating temperatures.

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point, Product ISO VG 40°C 100°C °C, ASTM D97 °C, ASTM D92 Mobil Arox EP 22 Mobil Arox EP 32 Mobil Arox EP 68 Mobil Arox EP 100 Mobil Arox EP 150 Mobil Arox EP 220

22 32 68 100 150 220

22 32 68 100 150 220

4.2 5.6 9.1 11.9 15 19.5

-45 -33 -33 -21 -15 -21

168 219 239 252 268 288

COMMERCIAL

Mobil Arox™ EP Series high performance rock drill oils are designed primarily for pneumatically operated rock drills in underground and surface mining operations. High quality base stocks and carefully selected additives combine to deliver excellent chemical stability and outstanding protection against wear and corrosion. These oils provide an optimum balance between adhesiveness and emulsibility. This allows the lubricant

INDUSTRIAL


ENGER

INDUSTRIAL LUBRICANTS QUENCH OILS

Product Mobil Fenso 90 Mobil Fenso 150

speed control, as well as excellent and consistent cleanliness of parts. FENSO 150 is a high speed cold quench oil recommended for carbon and alloy steels requiring uniform hardness, cleanliness and dimensional stability.

MARINE

Mobil Fenso™ Series quench oils promote excellent long life performance in cold quenching operations. FENSO 90 is a high speed product, formulated with a highly effective accelerator concentrate to help provide long service life with dependable quench

Viscosity, ASTM D445 IVF Quench Test cSt at cSt at Pour Point, Max cooling rate 40°C 100°C °C, ASTM D97 °C/min (@°C) 38 25.1

6.5 4.7

200 205

637 634

AVIATION


48

GREASES


INDUSTRIAL LUBRICANTS REFRIGERATION OILS Please your local sales rep or our technical help desk at 1-888-968-3776 for any inquiries about your application. Mobil Glygoyle™ 22 is a high performance synthetic lubricant that delivers outstanding performance in gear, bearing and circulation system applications operating at extreme temperatures in conditions well beyond the capabilities of mineral oils. This polyalkylene glycol-based (PAG) lubricant is shear-stable with outstanding resistance to thermal degradation, oxidation Product Mobil Gylgoyle 22

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point, 40°C 100°C °C, ASTM D97 °C, ASTM D92 177

25.1

-41

Mobil Gargoyle™ Arctic Oils have very low pour points for lubricating cylinders and bearings of reciprocating and rotary refrigeration compressors. These naphthenic oils are almost wax-free, delivering Product ISO VG Mobil Gargoyle Arctic C Heavy Mobil Gargoyle Arctic Oil 300

46 68

Product ISO VG 68 220

Mobil Zerice S 68

68

229




46 68

-39 -36

195 200

rotary compressors and are particularly successful in systems using ammonia as the refrigerant. These fluids are compatible with most common refrigerants, except sulphur dioxide.


cSt at 100°C

V.I. ASTM D2270



69 220

10.1 25

136 149

-50 -39

266 260

Mobil Zerice™ S Oils are quality synthetic refrigeration compressor lubricants based on alkyl benzenes, which have outstanding miscibility with hydrochlorofluorocarbon (R22). This allows them to be used in very low temperatures, down to -60°C. Their very low pour and flow points help prevent harmful wax precipitation, which can block expansion Product ISO VG

excellent fluidity at very low temperatures. They are used primarily with ammonia refrigerants but are suitable for many other refrigerant types; exceptions include all HFC refrigerants and sulphur dioxide.

Mobil Gargoyle Arctic SHC™ 200 Series are synthetic hydrocarbon polyalphaolefin (PAO) lubricants for refrigeration compressors and heat pumps in severe service. They are recommended for reciprocating and

Mobil Gargoyle Arctic SHC 226E Mobil Gargoyle Arctic SHC 230

and the formation of sludge and deposits. A proprietary additive system strengthens EP/anti-wear protection, guards against corrosion and rust and resists foam without detracting from the intrinsic attributes of the PAG base oils. It is suitable for specific refrigeration applications, such as propane and butane screw and centrifugal compressors.

valves and heat transfer surfaces. The synthetic formulation provides excellent chemical stability, which resists reaction with refrigerants and maintains high thermal stability to help prevent oil breakdown. In some circumstances, these oils can also be used in compressors where ammonia acts as the refrigerating fluid.


cSt at 100°C



68

6.5

-27

174



RUST PREVENTIVE finely finished parts between machining operations, including those where water-soluble cutting and grinding fluids have been used. It is also suitable for use on parts just before they are packaged for storage or shipment, or to “dry” parts as temporary protection until a heavier rust preventive can be applied.

Viscosity, ASTM D445 cSt at Flash Point, Product 40°C °C, ASTM D92 Mobilarma 245

2.6

38

Product Mobilarma 778 Mobilarma 798

dustrial, construction, mining and marine applications. Mobilarma 700 Series products exhibit excellent water displacing properties and form thin tenacious films that protect surfaces even under severe conditions, including high moisture levels and exposure to acid or corrosive fumes.

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at 40°C 100°C 39 –



-3 –

190 238

– 23.1

Product Mobil Vaprotec Light

0.880 –

inhibitor to protect surfaces submerged in oil, and vapour space inhibitors to protect surfaces exposed to oil vapours.

MARINE

Mobil Vaprotec™ Light is an ISO 32, turbine-quality circulation oil containing anti-oxidants and defoamants. It is enhanced with a three-phase rust inhibitor to protect surfaces lightly coated with oil, a liquid phase


Viscosity, ASTM D445 Spec. Gravity cSt at cSt at Pour Point, Flash Point, kg/l at 15.6°C, 40°C 100°C V.I. °C, ASTM D97 °C, ASTM D92 ASTM D1298 30

5.3

95

ENGER

Mobilarma™ 700 Series performance rust preventives cover a range of applications, including storage and inter-operational activities. Mobilarma 778 is designed for the protection of cold-rolled sheet and coiled steel in the metal industry. Mobilarma 798 is for the lubrication and rust protection of wire rope in in-

COMMERCIAL

Mobilarma™ 245 rust preventive is designed to protect metal surfaces from rust and corrosion. It is formulated using light bodied petroleum solvents with polar rust preventive, water displacement and fingerprint neutralizing additives. This product is easy to apply and easy to remove, making its use less manpower intensive. Mobilarma 245 is suited for the thin film protection of

INDUSTRIAL


-7

193 min

0.875

AVIATION


50

GREASES


INDUSTRIAL LUBRICANTS SPINDLE OILS Mobil Velocite™ Oil Numbered Series are performance products primarily designed for the lubrication of high speed spindles in machine tools. They are also used in some critical hydraulic, circulation systems and air line oilers where the appropriate

viscosity grade is selected. They are formulated from select high quality, low viscosity base oils and additives that deliver good resistance to oxidation and protection from rust and corrosion. They possess very good resistance to foaming and separate readily from water.


Product ISO VG

cSt at 40°C

cSt at 100°C



Mobil Velocite No 6 Mobil Velocite No 10

10.0 22.0

2.62 4.0

-15 -30

180 212

10 22

INDUSTRIAL LUBRICANTS TRANSFORMER OILS Voltesso™ is a line of electrical insulating oils designed to meet the critical operating requirements of most types of electrical equipment. They are made from fully refined, naphthenic base stocks and have excellent dielectric strength and power-factor characteristics and are formulated to resist oxidation and sludge. Voltesso oils have outstanding low temperature flow characteris Product Voltesso N36 Voltesso 35

tics that help improve oil circulation and heat transfer in electrical equipment operating under the most severe cold weather conditions. They are recommended for use in power transformers, especially those that have forced oil cooling or are subject to cold startup. They meet Canadian Standards Association C50-08 specifications for Class A, Type I and Type II oils respectively.

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point, 40°C 100°C °C, ASTM D97 °C, COC, ASTM D92 7.6 7.6

2.1 2.1


-46 max -46 max

145 min 145 min


TURBINE OILS

Product ISO VG Mobil SHC 824 Mobil SHC 825

32 46


cSt at 100°C

V.I. ASTM D2270




31.5 43.9

5.9 7.9

135 145

<-54 -45

248 248

0.83 0.83

Mobil DTE 932 GT

32


cSt at 100°C

V.I. ASTM D2270




31.5

6.1

141

-18

240

0.84

Mobil DTE 832 Mobil DTE 846

32 46

engineered to provide the deposit control and “keep clean” performance required by severe duty gas turbines as well as excellent water separability needed for steam turbine operation. The formulations also include a non-zinc anti-wear system to meet the load-carrying requirements of geared turbines.

MARINE

Mobil DTE™ 800 Series high performance turbine oils are designed for use in steam turbines, gas turbines and combined cycle gas turbine (CCGT) applications under some of the most severe operating conditions. These progressive products are based on high quality hydrotreated basestocks for exceptional thermal/oxidation resistance along with specially chosen additives Product ISO VG

additive system to provide long oil life in combination with industry leading “keep clean” performance. The formulation also includes a non-zinc anti-wear system to meet the load-carrying requirements of geared turbines.

ENGER

Mobil DTE™ 932 GT is a next generation high performance turbine oil designed for use in GE large frame gas turbines. This product is based on selected high quality base oils carefully balanced with a proprietary Product ISO VG

and a unique additive system. This formula provides outstanding low temperature fluiditiy and exceptional resistance to degradation at high temperatures well beyond the capabilities of quality mineral oils. Mobil SHC 800 Series lubricants also provide excellent anti-wear properties as well as protection against rust and corrosion plus good air release performance and resistance to foaming.

COMMERCIAL

Mobil SHC™ 800 Series turbine oils are designed specifically to meet the needs some of the most severe industrial gas turbine applications with a nominal 10,000 hour TOST life. They are recommended for the lubrication of land-based gas turbines, particularly units under 3,000 hp used as standby power units, and in some types of total energy and combined cycle (gas/steam) systems. This innovative product family is formulated from wax-free synthesized hydrocarbons

INDUSTRIAL



cSt at 100°C

V.I. ASTM D2270




29.6 42.4

5.4 6.2

110 106

-30 -30

224 244

0.86 0.87

AVIATION


52

GREASES


INDUSTRIAL LUBRICANTS TURBINE OILS Mobil DTE™ 724 Oil was developed for higher-output gas turbines such as the General Electric Heavy Duty Gas Turbine Frame 7000. Mobil DTE 724 Oil offers Product ISO VG Mobil DTE 724

32


cSt at 100°C

V.I. ASTM D2270



31

5.4

95

10

420

Mobil DTE™ 732 M is next generation high performance turbine oil designed for use in Mitsubishi Heavy Industry (MHI) non-geared Single Shaft Heavy Duty Gas & Steam Turbines and Multi Shaft Gas Turbines. This product meets MHI’s requirements Product ISO VG Mobil DTE 732 M

32

Mobil DTE 732 Mobil DTE 746

32 46

for long life – high temperature turbine applications, MS04-MA-CL005, through high quality base oils and additive system designed to provide long oil life. Mobil DTE 732 M also meets the requirements of MS04-MA-CL001 and CL002.


cSt at 100°C

V.I. ASTM D2270


31.3

5.8

131

-15

Mobil DTE™ 700 Series lubricants are the most recent addition to the Mobil DTE turbine lubricant family, long recognized for high quality and reliability. These zinc-free lubricants are specifically designed for gas and steam turbine applications. They are formulated with carefully selected base stocks and additives, including anti-oxidants, rust and corrosion inhibitors Product ISO VG

excellent thermal and oxidative stability, and resistance to deposit formation to meet the high temperature demands of gas turbines.


and anti-foam agents. These deliver outstanding resistance to oxidation and chemical degradation. Mobil DTE 700 lubricants exhibit excellent water separation, resistance to emulsion formation and anti-foaming characteristics to provide reliable operation. Their enhanced air release properties are critical for turbine hydraulic control mechanisms.


cSt at 100°C

V.I. ASTM D2270



30 44

5.5 6.8

117 113

-30 -30

228 230



TURBINE OILS


Product

cSt at cSt at 40°C 100°C

Mobil Teresso 32 Mobil Teresso 46 Mobil Teresso 68

32 46 68

sludge formation tendency specifications required by many utilities, in addition to ing oxidation tests. Mobil Teresso oils offer excellent demulsibility, rust inhibition and foam control. They are also recommended for use in circulating bath, splash and ring oiled systems supplying lubricant for bearings and gears of industrial machinery. They can also be used in hydraulic systems where anti-wear oil is not required. Pour Point, °C, ASTM D97


Density @ 15°C (kg/L)

-32 -27 -26

204 212 226

0.868 0.873 0.876

5.13 6.36 8.26

Product Mobil Teresso GTC 32 Mobil Teresso GTC 46

High quality hydrotreated basestocks combine with a proprietary additive package to work synergistically, providing exceptional trouble-free long-life performance in severe cyclical service gas turbines.


V.I. ASTM D2270


Flash Point, °C, COC, ASTM D92

32 46

118 116

-27 -24

215 min 215 min

ENGER

Mobil Teresso™ GTC Series. These high performance turbine oils deliver excellent lubrication for turbines in the most severe operating conditions. These highly versatile lubricants can be used in steam, gas, and combined cycle gas turbine (CCGT) applications.

COMMERCIAL

Mobil Teresso™ is a line of turbine-quality R&O (Rust & Oxidation) circulating oils designed primarily for steam and hydraulic turbine circulating systems. All grades are formulated from select API Group 1 basestocks and a high performance additive system that provides outstanding oxidation control, rapid separation of foam and air and protection from rust and corrosion. These oils easily sur the

INDUSTRIAL


MARINE AVIATION


54

GREASES


INDUSTRIAL LUBRICANTS WAY OILS Mobil Vactra™ Oil Numbered Series are quality slideway lubricants specifically designed to meet the requirements for accuracy, aqueous coolant Product ISO VG Mobil Vactra No. 2 Mobil Vactra No. 4


68 220

cSt at 40°C


68 221

-33 -3

Mobil Vacuoline™ 1400 Series are high performance lubricants specifically designed to satisfy the requirements of machine tools that use a single oil for both hydraulics and way lubrication. They are formulated using high quality mineral base oils and a unique additive system that provides excellent lubricity to eliminate stick-slip and chatter of heavily loaded and vertical Product ISO VG Mobil Vacuoline 1405 Mobil Vacuoline 1409 Mobil Vacuoline 1419

32 68 220

separability, and equipment protection of precision machine tools.


228 240

box ways. They exhibit a high degree of oxidation and thermal stability that helps to extend oil life and keep lubricated surfaces clean and free from corrosion or deposits that could detract from finished parts quality and accuracy. These oils provide the optimum balance between these divergent requirements.


cSt at 100°C

V.I. ASTM D2270



32 68 215

5.3 8.57 19.0

96 96 96

-12 max -6 max -6 max

210 218 257



COMMERCIAL VEHICLE LUBRICANTS

PRODUCT

PAGE

Mobil Delvac™ Synthetic Transmission Fluid 50.......... 63 Mobil Delvac™ Synthetic ATF....................................... 63 Mobil Delvac™ Synthetic Gear Oils.............................. 63 Mobil Delvac™ Synthetic Final Drive and Axle Oil........ 63 Mobilube™ HD LS 80W-90.......................................... 66 Mobilube™ HD Plus MG 75W, 80W-90 and 85W-140................................................... 66 Mobilube™ HD Extra MG 75W and 80W-140.............. 66 Mobilube™ XFD 50 and 60.......................................... 66 Mobiltrans™ AST (All-Season Transmission)............... 67 Mobiltrans™ AST 30 and Mobiltrans™ AST Extra 20........................................... 67 Mobiltrans™ HD 10W, 30 and 50................................. 67

Tractor Hydraulic Fluids

Mobil Hydraul™............................................................ 68

Railway

Galcar All Year.............................................................. 68

Coolant/Antifreeze

Mobil Delvac™ Extended Life Coolant/Antifreeze – C Series...................................... 69 Mobil™ Heavy Duty SCA Precharged Coolant/Antifreeze..................................... 69



56

GREASES

Heavy Duty Power Transmission Fluids

AVIATION

Mobil Delvac™ CNG/LNG 15W-40............................... 62 Mobil GEO™ 15W-40................................................... 62

MARINE

Heavy Duty Natural Gas Engine Oils

ENGER

HDEO Selection Chart.............................................57-58 Multigrade HDEO Selection Star Chart........................ 59 Mobil Delvac 1™ ESP 5W-40 and 0W-40.................... 60 Mobil Delvac 1™ LE 5W-30.......................................... 60 Mobil Delvac™ Elite 222 0W-30................................... 60 Mobil Delvac™ Elite 10W-30 and 15W-40.................... 60 Mobil Delvac™ 1300 Super 10W-30 and F2 15W-40.... 61 Mobil Delvac™ 1230 and 1240...................................... 61 Mobil Delvac™ 1640..................................................... 61 DIOL™ 9 RD Series..................................................... 62

COMMERCIAL

Heavy Duty Diesel Engine Oils

INDUSTRIAL

COMMERCIAL VEHICLE PRODUCT LISTING BY APPLICATION

COMMERCIAL VEHICLE LUBRICANTS HEAVY DUTY ENGINE OILS SELECTION CHART

Viscosity Grade API CF API CF-2 API CG-4 API CH-4 API CI-4 API CI-4 PLUS API CJ-4 API SF API SH API SJ API SL API SM API SN ACEA E2 ACEA E5 ACEA E6 ACEA E7 ACEA E9 JASO DH-1 JASO DH-2 CATERPILLAR ECF-2 CATERPILLAR ECF-3 CATERPILLAR TO-2 CUMMINS CES 20071 CUMMINS CES 20072 CUMMINS CES 20076 CUMMINS CES 20077 CUMMINS CES 20078 CUMMINS CES 20081 DAF EXTENDED DRAIN FORD WSS-M2C171-E Twin Disc S364A DETROIT FLUID SPEC 7SE 270 DETROIT FLUID SPEC 93K214 DETROIT FLUID SPEC 93K218 DETROIT ENGINE OIL 93K218 DEUTZ DQC III-10 LA DEUTZ DQC IV-10 LA EMD ENGINES GE MACK EO-M MACK EO-M Plus MACK EO-N Plus 03 MACK EO-O Plus MAN M 270 MAN M 3275-1 MAN M 3277 MAN M 3477 MAN M 3677 MB-APPROVAL 228.2 MB-APPROVAL 228.3 MB-APPROVAL 228.31 MB-APPROVAL 228.51 MB-APPROVAL 235.27 MTU OIL CATEGORY 2 MTU OIL CATEGORY 2.1 MTU OIL CATEGORY 3.1 RENAULT TRUCK RGD RENAULT TRUCK RLD-2 RENAULT TRUCK RLD-3 RENAULT TRUCK RXD VICKERS 35VQ25 VOLVO VDS-2 VOLVO VDS-3 VOLVO VDS-4 ZF TE-ML04B ZF TE-ML04C

Mobil Delvac 1 ESP 5W-40 0W-40 – – – – R – R R R R R R R R – – – – – – R – R R – – – – – – – – R – R – – – – – R – R R – – – – – – – R – – – – R R – – – – R – – – R – R – – – R – – – – – – – – – – – R R R – – – – – R – – – – – – – – – R – – – R – – – R – – – – – – – – – – – – – – – R – R – – – – –

Mobil Delvac 1 LE 5W-30 – – – – R R R – – – – – R – – R R R – R – R – – – – – – R R R – – – R – – R – – – – – R – – – R R – – R R – – – R – R R – – – R R – –

Mobil Delvac Elite 222 0W-30 – – – R R R R – R R R R – – – – – – – – – R – – – R – – R – – – – – – – – – – – – R – – – – – – – – – – – – – – – – – – – – – – – – –

Mobil Delvac Elite 10W-30 15W-40 – – – – – – R R R R R R R R – – – – – – – R – R – – – – – – – – R R R – – – – – – R R R – – – – – – – – – – – – R R – – – – – – – – – R – – R R – – – – – – – – – – – – – – R R – – – – – – – – – – – – – – R R – – – – – – – – – – – – – – – – – – – – – – R R R R – – – –

Mobil Delvac 1300 Super 10W-30 F2 15W-40 R R – R – – R R R R R R R R – – – – – – R R R R – – – – – – – – – – R R – – – – – – R R – – – – – – – – – – – – R R – – – – – – – – – – – R – – – – – – – – – – – – – – R – R R – – – – – – – – – – – – – – – R – – – – – – – R – – – – – – R – – – – – R R R R R R – – – –

HEAVY DUTY ENGINE OILS SELECTION CHART

R R – – – – – R – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

R – – – – – – R – – – – – R – – – – R – – – – – – – – – – – – – – – – – – – – – – – – – R – – – – R – – – – R – – – – – – – – – – R –

GREASES

R R – – – – – R – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

DIOL 9 RD 40 20W-40 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – R R R R – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

AVIATION

Mobil Delvac 1640

MARINE

Mobil Delvac 1240

ENGER

Mobil Delvac 1230

COMMERCIAL

Viscosity Grade API CF API CF-2 API CG-4 API CH-4 API CI-4 API CI-4 PLUS API CJ-4 API SF API SH API SJ API SL API SM API SN ACEA E2 ACEA E5 ACEA E6 ACEA E7 ACEA E9 JASO DH-1 JASO DH-2 CATERPILLAR ECF-2 CATERPILLAR ECF-3 CATERPILLAR TO-2 CUMMINS CES 20071 CUMMINS CES 20072 CUMMINS CES 20076 CUMMINS CES 20077 CUMMINS CES 20078 CUMMINS CES 20081 DAF EXTENDED DRAIN FORD WSS-M2C171-E Twin Disc S364A DETROIT FLUID SPEC 7SE 270 DETROIT FLUID SPEC 93K214 DETROIT FLUID SPEC 93K218 DETROIT ENGINE OIL 93K218 DEUTZ DQC III-10 LA DEUTZ DQC IV-10 LA EMD ENGINES GE MACK EO-M MACK EO-M Plus MACK EO-N Plus 03 MACK EO-O Plus MAN M 270 MAN M 3275-1 MAN M 3277 MAN M 3477 MAN M 3677 MB-APPROVAL 228.2 MB-APPROVAL 228.3 MB-APPROVAL 228.31 MB-APPROVAL 228.51 MB-APPROVAL 235.27 MTU OIL CATEGORY 2 MTU OIL CATEGORY 2.1 MTU OIL CATEGORY 3.1 RENAULT TRUCK RGD RENAULT TRUCK RLD-2 RENAULT TRUCK RLD-3 RENAULT TRUCK RXD VICKERS 35VQ25 VOLVO VDS-2 VOLVO VDS-3 VOLVO VDS-4 ZF TE-ML04B ZF TE-ML04C

INDUSTRIAL


Mobil Delvac ™ Elite

Advanced synthetic blend with exceptional resistance to sludge

Mobil Delvac 1300 Super

conventional oil formulated to meet or exceed original equipment manufacturer (OEM) and API CJ-4 requirements, even in some of the most extreme conditions

★★

★★

★★★

★★★

★★★

★★ ★ ★★ ★★ ★★★ COMMERCIAL VEHICLE LUBRICANTS

HEAVY DUTY DIESEL ENGINE OILS

★ The number of stars indicates relative performance level.

Multigrade Heavy Duty Engine Oils Selector Star Chart

Extended Drain Capacity



HEAVY DUTY DIESEL ENGINE OILS

Product Mobil Delvac 1 ESP 5W-40 Mobil Delvac 1 ESP 0W-40


cSt at 100°C

V.I. ASTM D2270

Sulfated Ash, wt%, ASTM D874


Pour Point, ºC, ASTM D97

98 87

14.7 15.2

156 186

1.0 1.0

8.7 7.7

-48 -48

Mobil Delvac 1 LE 5W-30

It is well suited for an extensive array of diesel-powered commercial vehicles for both on- and off-highway use in industries such as transportation, mining, construction and agriculture. Mobil Delvac 1 LE 5W-30 meets or exceeds an extremely broad range of industry and manufacturer specifications from around the world.


cSt at 100°C

V.I. ASTM D2270




40

11.8

168

1

10

-51

Mobil Delvac Elite 222 0W-30


V.I. ASTM D2270




69

12.2

176

1.0

7.7

-45

Diesel Particulate Filters (DPFs) and Diesel Oxidation Catalysts (DOCs). These oils exhibit enhanced low temperature fluidity, high temperature viscosity retention, and piston deposit control and are highly recommended by engine builders for use in all high performance diesel engines in severe service, on and off highway.

AVIATION

Mobil Delvac Elite 10W-30 Mobil Delvac Elite 15W-40

with API CJ-4 additive technology, it is excellent for light and heavy duty diesel engines, including those with EGR and/or DPFs (Diesel Particulate Filters).

cSt at 40°C

Mobil Delvac™ Elite 10W-30 and 15W-40 are synthetic blend heavy duty diesel engine oils for extended drain capability. They meet the API CJ-4 specification, and provide the highest level of protection to modern, high performance diesel engines with Exhaust Gas Recirculation (EGR) and aftertreatment systems with Product

MARINE

Mobil Delvac™ Elite 222 0W-30 synthetic, heavy duty diesel engine oil helps extend engine life and improve fuel economy in modern diesel engines. Formulated Product

ENGER

Mobil Delvac 1™ LE 5W-30 synthetic, heavy duty diesel engine oil provides advanced engine protection, and helps improve fuel economy in modern low emissions vehicles. Mobil Delvac 1 LE 5W-30 utilizes state-of-the-art technology to deliver exceptional performance: engine durability, emissions system protection and extended drain capability. Product

Diesel Oxidation Catalysts (DOCs). It can also be used in refrigeration units and older well-maintained engines. Mobil Delvac 1 ESP 5W-40 and 0W-40 is recommended for a wide range of heavy duty applications and operating environments found in the on-road transport and off-road mining, forestry, construction, and agricultural industries. It also meets the API SM specification for gasoline engines.

COMMERCIAL

Mobil Delvac 1™ ESP 5W-40 and 0W-40 synthetic, high performance, heavy duty diesel engine oil helps extend engine life and may help improve fuel economy in modern diesel engines operating in severe applications. This oil meets the API CJ-4 specification. Stateof-the-art technology delivers exceptional performance in modern low emission engines, including those with Exhaust Gas Recirculation (EGR) and aftertreatment systems with Diesel Particulate Filters (DPFs) and

INDUSTRIAL



cSt at 100°C

V.I. ASTM D2270




81 111

12.2 15.2

146 140

1.0 0.9

10.7 10.7

-36 -36


60

GREASES


COMMERCIAL VEHICLE LUBRICANTS HEAVY DUTY DIESEL ENGINE OILS Mobil Delvac™ 1300 Super 10W-30 and F2 15W-40 high performance diesel engine oil helps extend engine life in some of the most severe on- and off-highway applications. It delivers outstanding performance in modern high output, low emission engines including those with Exhaust Gas Recirculation (EGR) and aftertreatment systems with Diesel Particulate Filters Product Mobil Delvac 1300 Super 10W-30 Mobil Delvac 1300 Super F2 15W-40


cSt at 100°C

V.I. ASTM D2270




79 114

11.9 15.0

145 137

1.0 1.0

8.8 8.8

-47 -44

Mobil Delvac™ 1230 and 1240 are heavy duty, diesel engine oils formulated from high performance base oils and a balanced additive system of ashless dispersants, metallic detergents, and inhibitors to control oxidation, Product Mobil Delvac

Mobil Delvac 1640

wear, corrosion, and rust. They are used in a wide range of applications where a monograde lubricant is recommended including 2-cycle diesel applications (e.g. the Detroit Series 53, 71 and 92 two-cycle engines).


cSt at 100°C

V.I. ASTM D2270




108

12

100

0.80

5.8

-21

Mobil Delvac™ 1640 is a high performance monograde diesel engine oil formulated from advanced technology base oils and a balanced additive system. It is recommended for intercooled, turbocharged Product

(DPFs) and Diesel Oxidation Catalysts (DOCs). Fully backwards compatible, Mobil Delvac 1300 Super 10W-30 and F2 15W-40 delivers the same exceptional performance in older conventional engines. As a result, they meet or exceed the requirements of the API CJ-4, CI-4 PLUS and CH-4 service categories as well as those of Original Equipment Manufacturers (OEMs).

engines operating under severe conditions on and off highway, and a range of applications calling for a monograde lubricant.


cSt at 100°C

V.I. ASTM D2270




132

14.7

112

1.4

12

-21



HEAVY DUTY DIESEL ENGINE OILS DIOL™ 9 RD Series are heavy duty crankcase lubricants for locomotive diesel engines. They meet the severe-service demands of the latest locomotive engines. The additive system is endorsed

by Electro-Motive Diesel (EMD) and General Electric (GE). It provides excellent engine protection and controls oil consumption to promote oil drain interval extensions.


Diol 9 RD 40 Diol 9 RD 20W-40

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270

141 135

14.7 15.3

104 118


COMMERCIAL

Product

-21 -21

HEAVY DUTY NATURAL GAS ENGINE OILS Mobil Delvac™ CNG/LNG 15W-40 high performance heavy duty engine oil is formulated specifically for spark ignited CNG and LNG fueled truck and bus engines. It provides excellent performance in the

ENGER

COMMERCIAL VEHICLE LUBRICANTS challenging operating environments presented by CNG (Compressed Natural Gas) and LNG (Liquefied Natural Gas) and offers extended drain interval capability.


Mobil Delvac CNG/LNG 15W-40

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270




114

15.3

140

0.9

6.4

-27

SAE Product Grade 15W-40

with less varnish, sludge, and carbon build-up under the most severe operating conditions. Recommended for Cummins B and C Series and Detroit Diesel Series 50G engines and meets the performance requirements of Cummins CES 2007, Detroit Diesel 7SE272-9510 and API Service Category CD.


cSt at 100°C

V.I. ASTM D2270



100

14.4

130

-27

215

5

0.5


62

GREASES



AVIATION

Mobil GEO™ 15W-40 is formulated to protect trucks and buses running on Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG). This advanced medium ash formulation combines high quality base stocks and balanced additives to deliver excellent oxidation, nitration, and thermal stability for minimal combustion chamber ash deposits. Mobil GEO 15W-40 lubricates

MARINE

Product

Mobil GEO 15W-40

INDUSTRIAL


COMMERCIAL VEHICLE LUBRICANTS HEAVY DUTY POWER TRANSMISSION FLUIDS Mobil Delvac™ Synthetic Transmission Fluid 50 is a synthetic manual transmission lubricant engineered to meet extended drain and OEM warranty requirements. It provides year-round lubrication of manual transmissions in light to severe duty on- and off-highway applications in a wide range of environments. Designed to Product Mobil Delvac Synthetic Transmission Fluid 50


cSt at 100°C

V.I. ASTM D2270


132

17.5

146

-45

Mobil Delvac™ Synthetic ATF is a synthetic fluid recommended by Allison Transmission, approved against the Allison TES-295 Specification. The fluid meets the demanding requirements of modern heavy duty automatic transmissions. The synthetic base oil composition enables excellent performance even in some of the harshest of operating conditions, Product Mobil Delvac Synthetic ATF

Mobil Delvac Synthetic Gear 75W-90 Mobil Delvac Synthetic Gear 80W-140

Mobil Delvac™ Synthetic Final Drive and Axle Oil

221


V.I. ASTM D2270


39

7.3

168

-54


236

ing capability and where extreme pressures and shock loading are expected. Mobil Delvac Synthetic Gear Oil 75W-90 and 80W-140 incorporate the latest technology in synthetic base stocks and advanced additives providing significant advantages over mineral gear oils.


cSt at 100°C

V.I. ASTM D2270


120 310

15.9 31.2

140 139

-48 max -36 max

Mobil Delvac™ Synthetic Final Drive and Axle Oil is a high performance drivetrain lubricant that meets the requirements of the Caterpillar FD-1 standard. It is specifically engineered to provide optimum component life when used as recommended in off-highway truck and bulldozer final drives, axles, bevel gears, and differentials, especially those operating under high Product


promoting outstanding gear shifting and power transfer. Compared to conventional ATF fluids, this fluid’s inherently high viscosity index and stability protects against thermal breakdown at high operating temperatures, while providing outstanding performance at sub-zero temperatures.

cSt at 40°C

Mobil Delvac™ Synthetic Gear Oils are synthetic drivetrain lubricants engineered to meet extended drain and warranty requirements. These products are for heavy duty drivetrains that require gear lubricants with relatively high viscosity and excellent load-carry Product

provide maximum protection and extended operating life to heavy duty transmissions. Compared to conventional sulphur-phosphorus gear oils, this lubricant provides significant advantages, including outstanding high temperature performance, oxidation stability, wear protection, and corrosion control.


205 210

loads and extreme temperatures. Advanced synthetic base oils and the latest additive technology combine to promote extended oil drain intervals and to prolong the life of bearings and gears. The synthetic base oil composition enables excellent performance in some of the harshest operating conditions at high temperatures and at temperatures as low as -35°C.


cSt at 100°C

V.I. ASTM D2270


320

31.6

138

-45 max



246


“Bumper-to-Bumper” Applications for Your Business* Gear Oils

Coolant/Antifreeze Mobil Delvac™ Extended Life Coolant/Antifreeze Mobil Delvac™ Extended Life 50/50 Coolant/Antifreeze Mobil Delvac™ Extended Life 55/45 Coolant/Antifreeze

Mobil Delvac™ Synthetic Gear Oil 75W-90; 80W-140 Mobilube™ HD Plus MG 75W; 80W-90; 85W-140 Mobilube™ HD Extra MG 75W; 80W-140

Mobil™ Heavy Duty SCA Precharged Coolant/Antifreeze Mobil™ Heavy Duty SCA Precharged 50/50 Coolant/Antifreeze Mobil™ Heavy Duty SCA Precharged 60/40 Coolant/Antifreeze Mobil™ Heavy Duty SCA Precharged 55/45 Coolant/Antifreeze

Hydraulic Fluids Mobil SHC™ 500 Series Mobil DTE 10 Excel™ Mobil Univis™ N-C Mobil Nuto™ H-C

Engine Oils Mobil Delvac 1™ ESP 0W-40; 5W-40 Mobil Delvac™ Elite 222 0W-30 Mobil Delvac™ 1300 Super 15W-40; 10W-30

Greases Mobil Epic™ EP Moly Mobil Epic™ MQ Mobil Centaur™ Moly 1 Mobilgrease XHP™ Mine Series Mobil Unirex™ EP 2 Mobil Unirex™ EP 1 Moly

Transmission and Drivetrain Lubricants Mobiltrans AST™ Extra 20W Mobiltrans AST™ Mobiltrans AST™ 30 Mobiltrans HD™ 10W; 30; 50

Mobil Delvac™ Synthetic Final Drive & Axle Oil Mobil Delvac™ Synthetic ATF Mobil Delvac™ Synthetic Transmission Fluid 50 Mobilube™ XFD 50 Mobil Hydraul™ Extra Mobil Hydraul™ 50; 56

*This is a general illustration to identify some of the key components and applications; the list of products is not intended as a specific recommendation for any particular OEM model. Off-highway applications are different from model to model and OEM to OEM. For specific OEM model recommendations, please your Imperial Representative.

HEAVY DUTY POWER TRANSMISSION FLUIDS Mobilube™ HD LS 80W-90 is a high performance automotive lubricant formulated from select base oils and an advanced additive system specifically for limited-slip differentials. This lubricant is engineered for API GL-5 level performance in heavy duty limited-slip

Mobilube HD LS 80W-90


cSt at 100°C

V.I. ASTM D2270


132

14.3

107

-27

Mobilube™ HD Plus MG 75W, 80W-90 and 85W-140 are high performance commercial gear lubricants formulated from select base oils and an advanced additive system. These lubricants are engineered for heavy duty transmissions, axles and final drives where extreme pressures and shock loading are expected.

Mobilube HD Plus MG 75W Mobilube HD Plus MG 80W-90 Mobilube HD Plus MG 85W-140


V.I. ASTM D2270


92 139 333

15.8 14.5 25.4

184 103 99

-45 -27 -18


V.I. ASTM D2270


93 268

15.9 27.4

182 134

-48 -33


150 160

due to fatigue. These lubricants deliver excellent performance in heavy duty commercial axles and final drives subject to extreme pressures and shock loading. They provide exceptional chemical and thermal stability at elevated bulk oil temperatures generated under heavy loads and/or high ambient temperatures.

AVIATION

Mobilube XFD 50 Mobilube XFD 60

150 210 230

chemical and thermal stability at elevated bulk oil temperatures, good performance at low temperatures, and protection against rust from water contamination and wet conditions. Mobilube Extra 80W-140 and Mobilube HD Extra 75W are recommended as an API GL-6 lubricant.

cSt at 40°C

Mobilube™ XFD 50 and 60 high performance drivetrain lubricants are engineered to deliver optimal component life in Caterpillar final drives and axles when used as recommended. They are formulated from advanced base oils and the latest additive technology to protect bearings and gears from premature failure Product


MARINE

Mobilube™ HD Extra MG 75W Mobilube™ HD Extra 80W-140

They provide excellent chemical and thermal stability at elevated bulk oil temperatures, good performance at low temperatures, and good protection against rust from water contamination and wet conditions. They deliver excellent performance where API GL-5 or MT-1 lubricants are required.

cSt at 40°C

Mobilube™ HD Extra MG 75W and 80W-140 are high performance commercial gear lubricants formulated from select base oils and an advanced additive system. These lubricants are engineered for heavy duty manual transmissions, axles, and final drives subject to severe service with shock loading. They provide excellent Product

208

ENGER

Product


COMMERCIAL

Product

differentials, axles, and final drives where extreme pressures and shock loading are expected. This product delivers exceptional chemical and thermal stability at elevated bulk oil temperatures.

INDUSTRIAL



cSt at 100°C

V.I. ASTM D2270


206 334

18.4 25.2

97 97

--24 -15

250 255


66

GREASES



COMMERCIAL VEHICLE LUBRICANTS HEAVY DUTY POWER TRANSMISSION FLUIDS Mobiltrans™ AST (All-Season Transmission) is a high performance drivetrain lubricant engineered to meet or exceed the requirements of Caterpillar’s TO-4M performance specifications for off-highway transmissions, drivetrains and hydraulic systems. This advanced technology lubricant provides clutch and brake compatibility and extended life that has Product Mobiltrans AST

not been possible with previous formulations. Mobiltrans AST combines a blend of semi-synthetic base oils with an advanced additive system. The product provides all-season lubrication of all drivetrain components in light to severe duty off-highway equipment operating in a wide range of environments.


cSt at 100°C

V.I. ASTM D2270


107

14.2

134

-39

Mobiltrans™ AST 30 and Mobiltrans™ AST Extra 20 high performance multigrade transmission and drive train lubricants are uniquely designed to provide low temperature and multi-season service in powershift


cSt at 100°C

V.I. ASTM D2270


Mobiltrans AST 30 Mobiltrans AST Extra 20

57.6 32.9

10.5 7.5

173 206

-45 -54

Mobiltrans™ HD 10W, 30 and 50 are high performance heavy duty transmission and drivetrain lubricants engineered to meet or exceed the requirements of the rigorous Caterpillar TO-4 specification. This product line is uniquely designed to optimize the performance of powershift transmissions, gearboxes, and final drives. In hydraulic applications, they provide maximum

Mobiltrans HD 10W Mobiltrans HD 30 Mobiltrans HD 50

222

transmissions, gearboxes, clutches, final drives and hydraulic systems. Mobiltrans AST 30 is recommended for temperatures as low -35°C; Mobiltrans AST Extra 20 can be used at -45°C.

Product

Product



180 170

protection even in high pressure systems. Select base oils combine with an advanced additive system to deliver the precision needed to maximize productivity in construction, quarrying and mining equipment operating in severe conditions. These products offer an advantage over mixed fleet engine oils and previously used lubricants meeting Caterpillar TO-2.


cSt at 100°C

V.I. ASTM D2270


42 100 195

6.3 11.2 18.0

96 97 100

-33 -18 -15



202 224 240


TRACTOR HYDRAULIC FLUIDS calling for a “heavier” viscosity fluid in summer operation or “all-season” use where temperatures are above -25°C. Mobil Hydraul 50 is recommended for year-round service in systems calling for a “lighter” viscosity fluid, and as a winter grade replacement for Hydraul 56 in temperatures as low as -35°C. Hydraul Extra is an all-season fluid suitable for the most severe applications across an operating temperature range of -35°C to 100°C.


Product Mobil Hydraul 50 Mobil Hydraul Extra Mobil Hydraul 56

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270


34 43 55

7.25 9.6 9.30

181 218 145

-54 -51 -42


COMMERCIAL

Mobil Hydraul™ high performance multipurpose tractor lubricants are for agriculture, forestry, mining and construction equipment where a common oil sump is used for transmission, differential, final drive, wet brake, wet clutch and hydraulic components. Advanced lubrication technology optimizes the performance of equipment operating in a wide range of environments and conditions. All grades are well suited for reducing wet brake chatter. Mobil Hydraul 56 is for systems

INDUSTRIAL


170 170 200

ENGER

COMMERCIAL VEHICLE LUBRICANTS RAILWAY

Density Product @ 15°C kg/m3 Galcar All Year

872

stocks combine with high performance additives to inhibit oxidation and promote long service life, high load-carrying capability, control of rust and corrosion, good water separation and low temperature fluidity.

Kinematic Viscosity

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270



40

6.3

102

-39

225

MARINE

Galcar All Year is formulated for the lubrication of railway car journal bearings and locomotive suspension bearings. It meets the specifications of major Canadian railways and the all-year specification of the American Association of Railways (AAR). High quality base

AVIATION


68

GREASES


COMMERCIAL VEHICLE LUBRICANTS COOLANT/ANTIFREEZE Mobil Delvac™ Extended Life Coolant/Antifreeze – C Series feature a patented Hybrid and Organic Acid Technology (OAT) formula that protects cooling systems for 960,000 km on-highway use or 6 years / 12,000 hours of off-highway use when added as an initial fill and properly maintained. Designed for use

in on-highway truck, off-highway farm, marine, and stationary applications, including but not limited to Caterpillar, Detroit / MTU, GM Heavy Truck, Freightliner, PACCAR and Volvo Mack. Available in concentrate as well as 50/50 and 55/45 prediluted versions. Colour: Red

Mobil™ Heavy Duty SCA Precharged Coolant/ Antifreeze is a fully formulated traditional engine coolant for multi-vehicle fleets, including automotive, light duty and heavy duty diesel applications such as on-highway truck, off-highway and farm applications. It provides optimum protection against freezing, overheating, cavitation, erosion, corrosion and scale

for all heavy duty cooling system applications. Because it is precharged with a Supplemental Coolant Additive (SCA), Mobil Heavy Duty Precharged Coolant/ Antifreeze requires no SCAs at initial fill and ensures proper chemistry at every top-off. Available in concentrate as well as 60/40, 55/45, and 50/50 prediluted versions. Colour: Purple.



ENGER VEHICLE LUBRICANTS ENGER VEHICLE ENGINE OILS

ENGER VEHICLE LUBRICANTS

PRODUCT

PAGE

enger Vehicle Engine Oils

Engine Oil Selection Chart....................................... 71-72

Engine Oil Selection Star Chart....................................73

Mobil 1™ ESP Formula 5W-30.....................................75

Mobil 1™ ESP Formula M 5W-40.................................75

Mobil 1™ Extended Performance 5W-20,

5W-30 and 10W-30.......................................................75

Mobil 1™ Turbo Diesel Truck 5W-40............................. 76

Mobil Super™ 1000...................................................... 76

Mobil Super™ 2000...................................................... 76

Mobil Super™ 3000...................................................... 76

enger Vehicle Drive Train Fluids

Mobil 1™ Synthetic ATF................................................77

Mobil™ Dexron®-VI ATF...............................................77

Mobil™ Multi-Vehicle ATF.............................................77

Mobil ATF™ D/M...........................................................77

Mobil ATF™ +4.............................................................77

Mobil ATF™ 3309.........................................................77

Mobil 1™ Synthetic Gear Lube LS................................78

Motorcycle Oils

Mobil 1™ Racing 4T.....................................................78

enger Vehicle Installer Greases

......................................................................................78



AVIATION

Mobil 1™ ESP X1 0W-30..............................................75

MARINE

ENGER

Mobil 1™ Advanced Fuel Economy.............................. 74 Mobil 1™....................................................................... 74

COMMERCIAL

INDUSTRIAL

GREASES

70

Most vehicles that specify 0W-20 (newer Toyotas and Hondas), 5W-20 and certain hybrids.

GF-5,SN

A1/B1

A1/B1 A5/B5

dexos 1® X

MB

BMW

71 Visit mobil.ca /pds for the most current product information Vehicles that require GF-5,SN 10W-30.

A1/B1 A5/B5

*For a full list of Industry and original equipment manufacturer approvals by product and viscosity see the Product Data Sheets available online at mobil.ca/pds

Mobil 1™ 10W-30 Advanced synthetic formula designed for domestics and imports.

Mobil 1™ 0W-40 Advanced synthetic Many European vehicles. SN, Porsche A3/B3 229.3 / Longlife-01 formulation designed to meet A40, Nissan A3/B4 229.5 the requirements of many GT-R, Chrysler European vehicles. MS10850, Chrysler MS10725 Mobil 1™ 5W-20 Advanced synthetic formula Vehicles that require GF-5,SN A1/B1 dexos 1® X designed to meet the 5W-20 requirements of newer domestic and import vehicles. Mobil 1™ 5W-30 Advanced synthetic formulation Vehicles that require GF-5,SN A1/B1 dexos 1® X designed to meet the requirements 5W/30. Honda/Acura A5/B5 of many domestic, including Corvette approved. HT0-06 GM, and imported vehicles. Mobil 1™ 5W-50 Higher viscosity, advanced Porsche. SN, Porsche A3/B3 229.1 / High synthetic formula designed for A40 A3/B4 229.3 Performance performance vehicles. Diesel Oil

Mobil 1™ 0W-20 Advanced synthetic formula designed for enhanced fuel economy and cold weather performance.

Vehicles that require GF-5,SN 10W-30.

dexos 1® X

Boosted, advanced synthetic formula designed for today’s longer oil change intervals. For use in many domestic and imported vehicles.

A1/B1 A5/B5

Mobil 1™ 10W-30 Extended Performance

GF-5,SN Honda/Acura HT0-06

Boosted, advanced synthetic Vehicles that require formula designed for today’s 5W-30 or 10W-30. longer oil change intervals. For use in many domestic and imported vehicles.


Ford Service Fill

Boosted, advanced synthetic Vehicles that require GF-5,SN A1/B1 dexos 1 X formula designed for today’s 5W-20. longer oil change intervals. For use in many domestic and imported vehicles. ®

GM Service Fill


Recommended API, ILSAC, Brand Name Viscosity Product Description Consumer Applications & Other Industry* ACEA

501.01 / 505.00

502.00 / 505.00

VW


ENGER VEHICLE ENGINE OIL SELECTION CHART


Boosted, higher viscosity, advanced synthetic formula designed for performance vehicles.

HT/HS applications. Racing and Flat tappet applications.

Low SAPS (sulphated ash, phosphorous sulphur). Available at most Mercedes Benz dealers.

SN, JASO MA1 2006

Mobil 1™ 10W-40 Racing 4T

MARINE

AVIATION

Longlife-04

BMW

VW

229.31 / Longlife-04 229.51

504.00 / 507.00

229.31 / 229.51

229.31 / 229.51 / 229.52

MB

ENGER VEHICLE ENGINE OIL SELECTION CHART

72

GREASES

*For a full list of Industry and original equipment manufacturer approvals by product and viscosity see the Product Data Sheets available online at mobil.ca/pds

ENGER


COMMERCIAL

Visit mobil.ca /pds for the most current product information Advanced synthetic formulas All motorcycles where designed specifically for 10W-40 is specified motorcycles where clutch lubrication is also important.

SN, Porsche C3, C2 C30, Chrysler MS-11106, PSA B712290, PSA B712297, JASO DL-1

Mobil 1™ ESP 5W-30 Advanced synthetic formula Low SAPS (sulphated ash, Formula designed specifically for phosphorous sulphur). enger car diesels that have diesel particulate filters.

Advanced synthetic formula designed specifically for enger car diesels that have diesel particulate filters.

Mobil 1™ ESP 5W-40 Formula M

E7

A3/B3

High performance ACEA C2, C3 gasoline and diesel engines found in the latest enger cars, SUVs and light vans.

CJ-4, CI-4, CI-4 Plus, SN, Caterpillar ECF-2 and ECF-3

SN

Ford Service Fill

Mobil 1™ ESP 0W-30 Advanced synthetic formulation X1 expertly engineered for extreme conditions

Mobil 1™ Turbo 5W-40 Advanced synthetic formula Most diesel applications. Diesel Truck designed for diesel powered including engines with pick-ups and trucks. diesel particulate filters.

Mobil 1™ 15W-50

GM Service Fill

ENGER VEHICLE LUBRICANTS INDUSTRIAL

Recommended API, ILSAC, Brand Name Viscosity Product Description Consumer Applications & Other Industry* ACEA

ENGER VEHICLE PRODUCT LISTING BY APPLICATION Choose the Best Protection for Your Vehicle




Fuel Economy meets or exceeds the requirements of the latest industry standards and outperforms our conventional oils. Recommended for SAE 0W-30, 5W-30 and 10W-30 applications.

Mobil 1™ 0W-40. Mobil 1 is the world’s leading synthetic motor oil brand delivering our ultimate performance and protection. Mobil 1 0W-40 European Car Formula (North America) or Protection Formula (rest of the World) is engineered for the latest gasoline and

diesel (without Diesel Particulate Filters or DPFs) engine technology. It provides exceptional cleaning power, wear protection and overall performance and keeps your engine running like new in all driving conditions.

Mobil 1™ 5W-20 and 5W-30 are advanced synthetic engine oils designed to keep your engine running like new by delivering exceptional wear protection, cleaning power and overall performance. Mobil 1 5W-20 and

5W-30 meet or exceed the industry’s toughest standards and outperform conventional oils. Mobil 1 lubricants are standard equipment (factory filled) in many new cars, including select high performance vehicles.

Mobil 1™ 5W-50 advanced synthetic engine oil promotes exceptional wear protection for a smooth driving experience every time. It meets or exceeds industry and manufacturers’ standards for high performance turbocharged, supercharged gasoline and

diesel multi-valve fuel injected engines. It is especially suited for high speed and severe service associated with stop and go driving. For racing or everyday driving, Mobil 1 5W-50 delivers heavy duty performance and protection for an outstanding driving experience.

Mobil 1™ 10W-30 advanced synthetic engine oil helps keep engines running like new by providing exceptional cleaning power, wear protection and overall performance. It meets or exceeds latest industry standards

for modern gasoline engines. Mobil 1 lubricants are standard equipment (factory filled) in many new cars, including select high performance vehicles.

Mobil 1™ 15W-50 is an advanced synthetic engine oil that delivers exceptional wear protection for a smooth driving experience. It meets or exceeds industry and manufacturers’ standards for high performance turbocharged, supercharged gasoline and diesel multi-valve

fuel injected engines. This winning, race-proven technology is especially suited for a wide variety of motorsports, towing, and other severe-service applications. Mobil 1 15W-50 helps deliver outstanding performance and protection for the winning edge.

Mobil 1 0W-20 Advanced Fuel Economy Mobil 1 0W-30 Advanced Fuel Economy Mobil 1 0W-40 Mobil 1 5W-20 Mobil 1 5W-30 Mobil 1 5W-50 Mobil 1 10W-30 Mobil 1 15W-50


cSt at 100°C

44.8 62.9 75 49.8 61.7 108 63.2 125

8.7 10.9 13.5 8.9 1 11.0 17.5 10.1 18

V.I. Pour Point ASTM D2270 °C, ASTM D97 173 166 185 160 172 180 146 160

-48 -50 -48 -43 -42 -45 -42 -39


224 226 230 230 230 231 232 232

AVIATION

Product*

* vehicle owners should consult their service manuals for the recommended oil viscosity grade


74

GREASES

typical values, actual values may vary


MARINE

Mobil 1™ 0W-30 Advanced Fuel Economy is an advanced high performance synthetic engine oil designed to help deliver outstanding engine protection and enhanced fuel economy. Mobil 1 0W-30 Advanced

ENGER

Economy meets or exceeds the requirements of the latest industry standards and outperforms conventional oils. Mobil 1 0W-20 Advanced Fuel Economy is recommended for SAE 0W-20 and 5W-20 applications.

COMMERCIAL

Mobil 1™ 0W-20 Advanced Fuel Economy is an advanced high performance synthetic engine oil designed to help deliver outstanding engine protection and enhanced fuel economy. Mobil 1 0W-20 Advanced Fuel

INDUSTRIAL

ENGER VEHICLE LUBRICANTS ENGER VEHICLE ENGINE OILS Mobil 1™ ESP X1 0W-30 advanced synthetic engine oil helps provide exceptional cleaning power, wear protection and overall performance. Expertly engineered to help prolong the life and maintain the efficiency of Product Mobil 1 ESP X1 0W-30

Viscosity, ASTM D445 HTHS Viscosity cSt at 40°C

cSt at 100°C


MRV at -40°C

mPa’s at 150°C ASTM D4683


65

12.1

0.8

24,800

3.5

7.6

Mobil 1™ ESP Formula M 5W-40 is an advanced performance synthetic engine oil designed to help provide exceptional cleaning power, wear protection and overall performance. It is engineered to help Product Mobil 1 ESP Formula M 5W-40

Mobil 1 Extended Performance 5W-20 Mobil 1 Extended Performance 5W-30 Mobil 1 Extended Performance 10W-30

prolong the life and maintain the efficiency of emission systems in both diesel and gasoline powered vehicles requiring an oil approved against Mercedes Benz 229.31 and MB 229.51 specifications.

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270


81

13.4

167

-39


236

oil changes. Mobil 1 Extended Performance is specially formulated to help provide outstanding protection during today’s longer oil change intervals.


cSt at 100°C

V.I. ASTM D2270



49.6 59.8 63.7

8.9 10.6 10.2

161 169 147

-42 -40 -39

230 230 232

Mobil 1™ Turbo Diesel Truck 5W-40 is a synthetic performance heavy duty diesel engine oil that helps to extend engine life while providing long drain capability and helps improve fuel economy for modern diesel


Mobil 1™ Extended Performance 5W-20, 5W-30 and 10W-30 are advanced synthetic engine oils designed to keep your engine running like new and to protect critical engine parts for 25,000 km between Product

emission systems in diesel and gasoline powered automobiles, this product meets or exceeds leading industry and car manufacturers’ standards for newer diesel and gasoline powered enger car engines.

engines operating in severe applications. State-of-the-art lubricant technology helps deliver exceptional performance in modern low emission engines, including refrigerated units, as well as older, well-maintained engines.


Product

cSt at 40°C

cSt at 100°C

Mobil 1 Turbo Diesel Truck 5W-40

97.9

14.5


Flash Point, V.I. °C, ASTM D92

153

215



Mobil Super™ 1000 motor oils are formulated from quality base stocks combined with modern performance additives to give your engine the protection and the performance you expect under a wide variety of operating conditions. These products meet or

exceed ILSAC GF-5 and API SN. Those claims are backward compatible with earlier performance levels such as API SM, SL, and SJ. The American Petroleum Institute (API) classifies these products as “resource conserving.”

cSt at 40°C

cSt at 100°C

V.I.

CCS,

MRV,



Spec. Gravity kg/l at 15.6°C

49 62 69

8.6 10.4 10.6

152 157 141

5,880 @ -30°C 6,440 @ -30°C 6,040 @ -25°C

26,900 @ -35°C 30,300 @ -35°C 18,700 @ -30°C

-31 -33 -33

221 220 222

0.860 0.860 0.869

Mobil Super™ 1000 5W-20 Mobil Super™ 1000 5W-30 Mobil Super™ 1000 10W-30

Mobil Super™ 2000 oils combine synthetic and conventional high quality base oils with friction reducing additives to help provide long engine life and outstandViscosity, ASTM D445 cSt at 40°C

cSt at 100°C

Mobil Super 2000 5W-20 Mobil Super 2000 5W-30 Mobil Super 2000 10W-30

46.9 61.4 66.3

8.3 10.4 10.4

Pour Point, V.I. °C, ASTM D97 153 159 145

Mobil Super™ 3000 synthetic motor oils help provide long engine life and outstanding protection in vehicles of all ages, even under severe conditions and across a wide range of operating temperatures. These oils outperform our conventional synthetic blended products, provide outstanding protection against sludge, engine rust and corrosion and optimum viscosity and fluidity across a broad range of temperatures.

Mobil Super 3000 0W-20 Mobil Super 3000 Formula D1 5W-30


218 222 220

0.8590 0.8590 0.8667

Mobil Super 3000 0W-20 and 5W-30 are classified by The American Petroleum Institute (API) as “resource conserving” and meet or exceed ILSAC GF-5. Those claims are backward compatible with earlier performance levels such as API SN, SM, SL, and SJ and previous LSAC categories. Mobil Super 3000 Formula D1 5W-30 is approved against General Motors dexos1®.

MARINE

Product

-36 -36 -36


ENGER

Product

ing protection for vehicles with more than 120,000 km. Formulated with seal conditioner, these oils help prevent leaks and reduce oil consumption.


cSt at 100°C

V.I.




44.9 65.1

8.6 11.2

173 167

-42 -39

238 239

0.848 0.8378

COMMERCIAL

Viscosity, ASTM D445 Product

INDUSTRIAL

AVIATION


76

GREASES


ENGER VEHICLE LUBRICANTS ENGER VEHICLE DRIVE TRAIN FLUIDS Mobil 1™ Synthetic ATF is a multi-vehicle, synthetic fluid designed to meet the demanding requirements of modern enger vehicles. It helps to improve


Product Colour Mobil 1 Synthetic ATF

Red

cSt at 40°C

cSt at 100°C

V.I.



36.3

7.4

176

-51

220

Mobil™ Dexron®-VI ATF is a high performance, synthetic blend ATF formulation that meets or exceeds the stringent requirements of GM’s DEXRON-VI specification Product Colour Mobil Dexron-VI ATF

Red

Product Colour

Red

cSt at 40°C

cSt at 100°C

29.5

5.83

Product Colour Mobil ATF D/M

Red

cSt at 40°C

cSt at 100°C

34.1

7.42

Product Colour Mobil ATF +4

Red

cSt at 40°C

cSt at 100°C

35.3

7.4

Product Colour Mobil ATF 3309

Red

220

Flash Point, V.I. °C, ASTM D92 193

180


356

tional properties, excellent low-temperature fluidity and dependable wear protection required in applications where a Chrysler MS-9602 type fluid is recommended.


cSt at 100°C

34.4

7.5

Mobil ATF™ 3309 is a high performance lubricant that meets original equipment manufacturers’ spec-

145

is recommended for applications requiring: GM DEXRON®, Ford MERCON® and Allison C-4 or GM DEXRON® III H.


Mobil ATF™ +4 is specially formulated to ensure optimal performance in Chrysler automatic transmissions. Its unique additive package provides the proper fric-

Flash Point, V.I. °C, ASTM D92

mance levels. Recommended by Imperial for use in applications requiring Dexron III. Mobil Multi-Vehicle ATF is not recommended for applications requiring Ford MERCON LV, MERCON SP, or GM DEXRON VI.


Mobil ATF™ D/M provides the excellent oxidation and friction stability, anti-wear properties, and low-temperature fluidity desired for most automatic transmissions. It

and provides warranty protection for model year 2006 and later GM vehicles. It also delivers improved performance in older GM vehicles requiring DEXRON fluid.


Mobil™ Multi-Vehicle ATF is a lubricant for car and truck automatic transmissions and other applications & recommended by Imperial for use in applications that require an automatic transmission fluid satisfying Ford Mercon and Mercon V perfor-

Mobil Multi-Vehicle ATF

and extend transmission efficiency, smooth shifting performance and helps improve fuel economy.


392

ifications for use in certain slip-controlled lock-up automatic transmissions.


cSt at 100°C

33

7.1



198


ENGER VEHICLE LUBRICANTS ENGER VEHICLE DRIVE TRAIN FLUIDS

Mobil 1™ Synthetic Gear Lube LS is a high performance, synthetic, multipurpose automotive gear lubricant. It is designed to meet the requirements

Mobil 1 Synthetic Gear Lube LS 75W-90 Mobil 1 Synthetic Gear Lube LS 75W-140


cSt at 100°C

99 170

15.2 24.4

Pour Point, V.I. °C, ASTM D97 142 175

-39 -48


COMMERCIAL

Product

of modern enger vehicles in many types of operating conditions, including limited slip applications and to deliver outstanding power transfer performance.

150 207

Additional enger Vehicle Drive Train Fluids Mobilube™ HD Plus 80W-90 and 85W-140............... 66 Mobilube™ HD Plus MG 75W.................................... 66 Mobilube™ HD LS 80W-90........................................ 66 Mobilube™ HD Extra 80W-140.................................. 66 Mobilube™ HD Extra MG 75W................................... 66


ENGER

INDUSTRIAL

MOTORCYCLE OILS

Product Mobil 1™ Racing 4T 10W-40


cSt at 100°C

82.0

13.1

Pour Point, V.I. °C, ASTM D97 161

-45


212


AVIATION

capacity in engines or transmissions. Synthetic fluids require significantly less thickener to achieve a multigrade viscosity rating and, in some cases, require no thickener at all. As a result, synthetic formulations tend to be very shear-stable and provide a solid, protective oil film for engine bearings, piston rings, transmission gears and other critical engine parts.

MARINE

Mobil 1™ Racing 4T is an advanced performance synthetic motorcycle oil whose unique synthetic structure delivers advantages beyond conventional products of similar viscosities. Conventional base oils become lighter in viscosity as temperature increase, which forces the use of thickeners to help the lubricant maintain viscosity as temperatures increase. These thickeners can shear down and lose their thickening

ENGER VEHICLE INSTALLER GREASES Mobil 1™ Synthetic Grease........................................ 91 Mobil Ronex™ MP...................................................... 91 Mobilgrease XHP™ 220 Series.................................. 97


78

GREASES




MARINE LUBRICANTS LISTING BY APPLICATION

INDUSTRIAL

COMMERCIAL

PAGE

Crosshead Engine Oils

Mobilgard™ 570....................................................................... 81

Mobilgard™ 560 VS................................................................. 81

Mobilgard™ 525....................................................................... 81

Mobilgard™ 300....................................................................... 81

Trunk Piston Engine Oils

Mobilgard™ ADL Series........................................................... 82

Mobilgard™ 12 Series.............................................................. 82

Mobilgard™ 410 NC (No Chlorine)........................................... 82

Mobilgard™ M30, M40 and M50.............................................. 82

Marine Hydraulic Oil

Mobil SHC Aware™ H Series................................................... 83

Marine Grease

Mobil SHC Aware™ Grease EP 2............................................ 83


80

GREASES


AVIATION

For more information, please refer to exxonmobil.com/marinelubes-en

MARINE

PRODUCT

ENGER

MARINE LUBRICANTS

MARINE LUBRICANTS CROSSHEAD ENGINE OILS Mobilgard™ 570 is a quality, extra high performance, marine diesel engine cylinder oil. The outstanding performance of Mobilgard 570 has been demonstrated at the elevated peak firing pressures and liner temperatures found in modern marine two stroke engines. It has an optimum viscosity of over 20 cSt. at 100ºC and low volatility to ensure excellent lubricant distribution and oil film retention. Through Product Mobilgard 570

Viscosity, ASTM D445 Spec. Gravity, cSt at cSt at V.I. Pour Point, Flash Point, kg/l at 15°C 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D1298 222

20

104

Mobilgard™ 560 VS is a high performance marine diesel engine cylinder oil for crosshead engines running on heavy fuel with sulphur levels from 0.5-4.0%. Advanced technology delivers superb protection from corrosive and adhesive wear at the higher tempera Product Mobilgard 560 VS

Product Mobilgard 525

222

20

Product Mobilgard 300

256

0.937

-9

256

0.937

20

102

-9

286

0.909

12

TBN, mg KOH/g, ASTM D2896 60


engines. This oil has sufficient alkalinity to neutralize strong acids entering the crankcase via fuel sulphur combustion. Enhanced load-carrying ability helps reduce wear in heavily loaded bearings.


70

extreme environments, Mobilgard 525 has an optimum viscosity of 20 cSt at 100ºC and low volatility to ensure lubricant distribution and oil film retention and help protect engine parts.



tures and pressures found in modern crosshead engines. The outstanding performance of this oil has been demonstrated at the highest peak firing pressures and liner temperatures.

104

Mobilgard™ 300 is an extra high performance system oil for crosshead diesel engines. High quality paraffinic base oils and a balanced additive system provide excellent protection for the severe operating conditions of recent design, high output crosshead marine diesel

-9

Viscosity, ASTM D445 Spec. Gravity, cSt at cSt at V.I. Pour Point, Flash Point, kg/l at 15°C 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D1298

Mobilgard™ 525 is a marine diesel engine cylinder oil for crosshead engines running low and ultra low sulphur distillate fuels and meets the requirements of MAN and Wartsila engines. Designed to protect in

the use of unique synthetic thickener technology and a balanced formulation, the high viscosity and low volatility is attained with little or no use of bright stock which can create deposit formation due to poor thermal stability. Mobilgard 570 has demonstrated outstanding ring and liner protection and cleanliness under sustained operation with fuel sulphur levels down to 1.5%.

97


-12

266

0.889



MARINE LUBRICANTS TRUNK PISTON ENGINE OIL

Product Mobilgard ADL 30 Mobilgard ADL 40

in severe-service applications and promotes removal of sludge and deposits. Mobilgard ADL Series oils minimize oil consumption associated with liner lacquering, improves overall engine cleanliness and help increase overhaul intervals. Excellent load-carrying properties minimize piston ring and liner wear, and make these lubricants suitable for marine gearing applications.


V.I. ASTM D2270



Spec. Gravity, kg/l at 15°C ASTM D1298


11.5 14.7

117 112

-30 -21

230 239

0.889 0.892

12 12

Mobilgard™ 12 Series high performance diesel engine oils are for trunk piston engines operating on low sulphur distillate fuels in marine and industrial applications. They deliver excellent resistance to Product Mobilgard 312 Mobilgard 412

oxidation and viscosity increase over long service, along with outstanding water separation and excellent protection against corrosion.


V.I. ASTM D2270





12.0 14.5

100 10

-9 -9

266 272

0.896 0.899

15 15

Product Mobilgard 410 NC

corrosion protection when using fuels containing up to 0.05 wt.% sulfur, even though metals such as steel, copper, silver and bronze are present. It has excellent lubricating properties and has high viscosity index to help reduce oil consumption, and is optimized for low and ultra low sulfur fuel use and is LNG, biofuel and Tier IV engine ready.


V.I. ASTM D2270





14.4

104

-18

255

0.894

10

Product


V.I. ASTM D2270





12.0 14.0 14.0 14.0

100 100 100 100

-6 -6 -6 -6

244 250 242 228

0.907 0.907 0.915 0.922

30 30 40 50



82

GREASES

Mobilgard M330 Mobilgard M430 Mobilgard M40 Mobilgard M50

standing residual fuel compatibility for excellent cleanliness, especially in the crankcase, camshaft, ring belt and piston undercrowns. They demonstrate excellent high temperature oxidation and thermal stability, low volatility, high load-carrying properties and protection against corrosion.

AVIATION

Mobilgard™ M30, M40 and M50 are three series of extra high performance engine oils for severe residual fuelled medium speed diesel engines in marine and stationary power applications. The number in each name refers to TBN. These market leading trunk piston engine oils employ potent additives and deliver out-

MARINE

Mobilgard™ 410 NC (No Chlorine) engine oil is a non-zinc and non-chlorine lubricant specifically formulated with an Electro Motive Diesel (EMD) and General Electric (GE) endorsed additive technology to meet requirements of heavily loaded diesel engines manufactured by EMD and used in marine applications. Its alkalinity reserve provides excellent

ENGER

COMMERCIAL

Mobilgard™ ADL Series increased dispersancy engine oils are for high BMEP medium and high speed diesel engines operating on distillate and MDO fuels. These oils are available in SAE 30 and 40 grades to suit most marine engine viscosity requirements. A special balance of detergent and dispersant delivers increased resistance to cylinder liner lacquer formation

INDUSTRIAL

MARINE LUBRICANTS MARINE HYDRAULIC OIL Mobil SHC Aware™ H Series lubricants are high performance, anti-wear hydraulic oils for modern high pressure hydraulic systems that meet the U.S. Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP) guidelines for “environmentally acceptable lubricants.” They provide excellent wide temperature range performance above and beyond Product Mobil SHC Aware H 32 Mobil SHC Aware H 46 Mobil SHC Aware H 68

the capabilities of non-synthetic environmentally acceptable oils. Mobil SHC Aware H Series oils are specially formulated from ester base stocks and provide exceptional anti-wear and film strength characteristics necessary for hydraulic systems operating under high load and high pressures.


cSt at 100°C

V.I. ASTM D2270


32 46 68

6.0 8.2 10.37

140 140 140

-30 -30 -30

Flash Point, °C, ASTM D92 185 185 185

MARINE LUBRICANTS MARINE GREASE Mobil SHC Aware™ Grease EP 2 is a high performance synthetic grease designed specifically for applications which are environmentally sensitive and meets the requirements of the U.S. Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP). Product Mobil SHC Aware Grease EP 2

This leading product is readily biodegradable and virtually non-toxic grease and is formulated based on biodegradable saturated ester base oils and a lithium/calcium soap thickener. It does not emulsify and has excellent water wash and salt water corrosion resistance.


Colour, Visual

NLGI Grade

Thickener Type

Dropping Point,°C ASTM D2265

150

Amber

2

Calcium/Lithium

>160



AVIATION LUBRICANTS LISTING BY APPLICATION

INDUSTRIAL

COMMERCIAL

PAGE

Grease

Mobil™ Aviation Grease SHC 100........................................... 85

Mobilgrease™ 28..................................................................... 85

Mobilgrease™ 33..................................................................... 85

Exxon HyJet™ IV-A Plus.......................................................... 85

Mobil Aero™ HFA..................................................................... 86

Jet Oil

Mobil Jet Oil™ II....................................................................... 86

Mobil Jet Oil™ 254................................................................... 86

Exxon™ Aviation Oil Elite 20W-50............................................ 86

MARINE

PRODUCT

ENGER

AVIATION LUBRICANTS

AVIATION


84

GREASES


AVIATION LUBRICANTS GREASE Mobil™ Aviation Grease SHC 100 high performance synthetic grease combines the unique features of a polyalphaolefin (PAO) synthetic base fluid and high quality lithium complex soap thickener system. The thickeners deliver a high dropping point, excellent resistance to water wash, and tenacious structural stability. The synthetic base oil and select additives provide outstanding protection against wear, rust,

corrosion, and high temperature degradation. The wax-free properties of the base oil promote low temperature mobility/pumpability and low starting and running torque values. Traction property is considerably lower than that of mineral oil, enabling temperature reductions in the load zone of rolling element bearings. Mobil Aviation Grease SHC 100 is the product of choice for aircraft wheel bearing applications.


Product Colour Mobil Aviation Grease SHC 100

cSt at 40°C

Red

cSt at 100°C Dropping Point, °C

100

14.5

Mobilgrease™ 28 is a high performance, wide temperature, anti-wear grease combining the unique features of a polyalphaolefin (PAO) synthetic base fluid with an organo-clay (non-soap) thickener. Consistency is between an NLGI No. 1 and No. 2 grease, with outstanding performance over a wide temperature

Water Washout, wt%

280

–

range. The wax-free nature of the synthetic base fluid, together with its high viscosity index compared to mineral oils, provide excellent low temperature pumpability, very low starting and running torque, and help reduce operating temperatures in the load zone of rolling element bearings.


Product Colour Mobilgrease 28

Dark Red

cSt at 40°C

cSt at 100°C

Dropping Point, °C

Water Washout, wt%

30

5.7

308

1

Mobilgrease™ 33 is a high performance lithiumcomplex grease designed for general purpose aircraft use. Consistency is between NLGI grades 1 and 2. Mobilgrease 33 utilizes a 100% polyalphaolefin base

oil and additives to help ensure outstanding lubrication performance over a wide range of temperatures and operating conditions.


Product Colour

cSt at 40°C

Mobilgrease 33

12.5

Blue Green

cSt at 100°C Dropping Point, °C 3.2

Kinematic Viscosity

Exxon HyJet IV-A Plus

Water Washout, 1 Hr at 79 ºC, wt%

1

6

246

Exxon HyJet™ IV-A Plus is a fire-resistant phosphate ester hydraulic fluid for use in commercial aircraft. Our best performing Type IV fluid approaches many of the performance capabilities of Type V fluids, including Product

Water Washout, 1 Hr at 38 ºC, wt%

high temperature stability, fluid life, low density and rust protection. Meets specifications of all major aircraft manufacturers and SAE AS1241.

cSt at -53.9°C

cSt at 37.8°C

cSt at 98.9°C

cSt at 127.6°C

V.I. ASTM D2270



Spec. Gravity kg/l at 25ºC

1320

10.6

3.6

2.6

280

<-62

175

0.996



AVIATION LUBRICANTS GREASE

Mobil Aero™ HFA is for aircraft systems requiring hydrocarbon-based hydraulic fluids. This low viscosity fluid contains shear-stable VI (viscosity index) improvers

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at V.I. Pour Point, Flash Point, kg/l at 15.6ºC 40°C 100°C ASTM D2270 °C, ASTM D97 ºC, COC, ASTM D92 ASTM D1298

Mobil Aero HFA

14.0

5.2

370

-60 max

93 min

COMMERCIAL

Product

for excellent low temperature performance, combined with good anti-wear performance and chemical stability.

INDUSTRIAL

0.872

AVIATION LUBRICANTS JET OIL

and oxidative stability to resist deterioration and deposit formation in both the liquid and vapour phases, as well as excellent resistance to foaming. Effective operating range: -40 °C to 204 °C.


Product

cSt at 40°C

cSt at 100°C



Mobil Jet Oil II

27.6

5.1

-59

270

Product Mobil Jet Oil 254


cSt at 100°C


Flash Point, ºC, COC, ASTM D92

kg/l at 15.6ºC ASTM D1298

26.4

5.3

-62

254

1.0044

Product Exxon Aviation Oil Elite 20W-50

Kinematic Viscosity

AVIATION

Exxon™ Aviation Oil Elite 20W-50 is a quality, semi-synthetic, ashless-dispersant aviation piston engine oil. It is formulated with highly refined mineral base oils combined with polyalphaolefin synthetic base oil and ashless performance additives for outstanding

outstanding thermal and oxidation stability that resists deterioration and deposit formation while maintaining the physical characteristics required by builder and military specifications. The physical properties of Mobil Jet Oil 254 are similar to those currently available, earlier-generation gas turbine lubricants. The effective operating range is between -40°C and 232°C.

MARINE

Mobil Jet Oil™ 254 is a third-generation, extra high performance, synthetic aircraft-type gas turbine lubricant engineered to meet the performance requirements of gas turbine engines in commercial and military aircraft. This product is formulated from a specially prepared, hindered-ester base stock and fortified with a unique chemical additive system. The result is

ENGER

Mobil Jet Oil™ II is a high performance aircraft-type gas turbine lubricant formulated with a highly stable synthetic base fluid and a unique chemical additive system. This combination delivers outstanding thermal

engine cleanliness and protection from wear and corrosion. This oil meets the requirements of all opposed piston engine manufacturers across a wide range of climatic conditions.

cSt at 40°C

cSt at 100°C

V.I. ASTM D2270


Flash Point, ºC, COC, ASTM D92

180

16.3 min, 21.9 max

130

-27

258


86

GREASES




GREASE PRODUCT LISTING BY APPLICATION

Product Brand

Product Brands vs Thickener Type

Lith – Lithium Complex Polyrex – Polyurea Centaur – Calcium Sulphonate

Grease XHP 222 Special Product Family

ISO/ NLGI

Identifier (Moly/Application)

Temp – Clay Lux – Lithium Grease – Multiple technologies

Identifier

Mobil Grease Product Families

Core Industrial Application Product Families

Mobil SHCTM, Mobilgrease XHPTM

Select Specialty Industrial Application Product Families

Mobil SHC PolyrexTM, Mobil PolyrexTM, Mobil Centaur XHPTM

Moly content: Special – 0.75 or 1%; Moly – 3%; Mine – 5%

Core Commercial Vehicle Application (On / Off Highway) Product Families

Mobil DelvacTM Xtreme, Mobilgrease XHPTM, Mobil CentaurTM

Core Personal Vehicle Installer Greases

Mobil 1TM Synthetic Grease, Mobilgrease XHPTM 222

MARINE

ENGER

ISO / NLGI The first two numbers correspond to the first two numbers of the base oil ISO Viscosity Grade (e.g. 220). The last number corresponds to the NLGI grade.

COMMERCIAL

Decoding Many Mobil Mobil Grease Product Names Master Brand

INDUSTRIAL

Mobil Grease Balanced Performance

AVIATION


88

GREASES


GREASE PRODUCT LISTING BY APPLICATION GREASE PRODUCT

PAGE

Agriculture Equipment Automotive Couplings

Mobilgrease XHP™ 220 Series.................................................97 Mobil Epic™ Series...................................................................98 Mobil Unirex™ EP Series..........................................................99 Mobil Delvac™ Xtreme Grease............................................... 100

Electric Motors Environmentally Aware Food Industry (NSF H-1) Gears – Enclosed, Semi-Fluid Gears – Open High Temperature – Clay Thickened

Mobil Polyrex™ EM...................................................................93 Mobil Unirex™ N.......................................................................93

Marine

Mobil SHC Aware™ Grease EP 2.............................................96

Multi-Purpose

Mobilith SHC™ Series..............................................................97 Mobilgrease XHP™ 220 Series.................................................97 Mobilgrease XHP™ 460 Series.................................................97 Mobil Centaur XHP™ 460 Series..............................................98 Mobilux™ EP Series.................................................................98 Mobil Epic™ Series...................................................................98 Mobil Unirex™ EP Series..........................................................99 Mobil™ Argon EP......................................................................99 Mobil™ Arcan 1.........................................................................99

Mobil 1™ Synthetic Grease.......................................................91 Mobil Ronex™ MP....................................................................91 Mobilgrease™ XTC...................................................................92 Mobilux™ EP 111......................................................................92

Mobil SHC™ Grease 100 EAL Series.......................................93 Mobil SHC Polyrex™ 462..........................................................94 Mobilgrease™ FM 101..............................................................94 Mobil Marvelube™ EP 9F.........................................................94 Nebula™ EP Special.................................................................94 Mobil Geargard™......................................................................95 Mobil Dynagear™ Series..........................................................95 Mobiltemp SHC™ 32.................................................................96 Mobiltemp™ Series...................................................................96



GREASE PRODUCT

PAGE

...........................................................................................

Off-Highway Heavy Duty Equipment and On-Highway Trucking

Mobil Centaur™ Moly Series................................................... 100 Mobil Delvac™ Xtreme Grease............................................... 100 Mobilgrease XHP™ Mine........................................................ 100

Paper Machines Pneumatic Tools / Air-line Lubricated Railway Drilling Specialty Synthetic

Mobilith SHC™ PM................................................................. 101 Mobil Centaur XHP™ 221....................................................... 101

Threads Wind Turbines Wire Ropes / Natural Core

Thredkote™ 706...................................................................... 103 Z-50 Pipe Dope....................................................................... 104

Mobil Arox™ NM 000.............................................................. 101

COMMERCIAL

INDUSTRIAL

GREASE PRODUCT LISTING BY APPLICATION

Arapen™ RB 320.................................................................... 102 Galena™ Tramo 3735............................................................. 102

Mobil SHC™ PF 462............................................................... 103 Mobil Beacon™ 325................................................................ 103

ENGER

DDR Grease............................................................................ 102

Mobil SHC™ Grease 460 WT................................................. 104

MARINE

Wire Rope Dressing................................................................ 104

AVIATION


90

GREASES


GREASES AUTOMOTIVE Mobil 1™ Synthetic Grease is an NLGI No 2 high performance automotive lubricant formulated with synthetic base fluid, lithium complex soap thickener and additives that deliver optimum extreme pressure properties, excellent resistance to water wash and outstanding protection against rust and corrosion. The thickener system provides a high dropping point;

the synthetic base oil provides excellent performance at high and low temperatures (-40°C to 150°C). Excellent structural stability and high shear-stability make this an outstanding automotive grease. It meets requirements of the National Lubricating Grease Institute (NLGI) performance classification GC-LB.

Colour, NLGI Soap Product ISO VG Visual Grade Type Mobil 1 Synthetic Grease

220

Red

2

Li-Complex

Mobil Ronex™ MP is a quality multipurpose grease recommended for a wide range of automotive and industrial applications. Formulated with a mineral oil base fluid combined with a lithium complex soap thickener and performance enhancing additives, this lubricant delivers excellent performance over a wide temperature range, including moderate load-carrying Product

Viscosity, ASTM D445 Water Washout, cSt at cSt at Dropping Point,°C ASTM D1264, 40°C 100°C ASTM D2265 at 79°C, % 220

23.8

288

6

and extreme pressure properties. This grease resists water, protects against corrosion and provides good oxidation and thermal stability. Ronex MP is compatible with most elastomer seal materials and meets the requirements of the National Lubricating Grease Institute (NLGI) performance classification GC-LB.


Colour, Visual

NLGI Grade

Thickener Type


115

Green

2

Li-Complex

280

Mobil Ronex MP

Additional Automotive Grease Mobilgrease XHP™ 220...........................................97



COUPLINGS

Product Mobilgrease XTC

coupling lubrication and protection. The base oil and extreme pressure (EP) / anti-wear (AW) additive package work to reduce friction wear from sliding tooth , deliver rust and corrosion protection, and high temperature stability for this leading edge product. Meets AGMA CG-1 and CG-2 coupling specifications.

Colour, Dropping Point,°C Visual Grade Type ASTM D2265 Dark Brown

1

Lithium

215


lubricant formulated with an extremely heavy (viscous) mineral base oil. This NLGI 1 Grade grease is fortified by an oil soluble molybdenum (Moly) additive and a very effective corrosion inhibitor.

Mobilux EP 111

Lithium

Viscosity, ASTM D445 Colour, NLGI Thickener Dropping Point,°C Product Visual Grade Type ASTM D2265 cSt at 100°C Black

1

180

45

Additional Couplings Grease Mobil Unirex™ EP Series.........................................99

ENGER

Mobilux™ EP 111 is an high performance grease primarily designed for AGMA CG-3 couplings. It is specifically formulated to help protect against wear, even in heavily loaded misaligned low speed gear couplings. Mobilux EP 111 is a lithium hydroxystearate

COMMERCIAL

Mobilgrease™ XTC is an high performance product designed for high speed coupling applications. Formulated with a high viscosity mineral base oil and an extremely effective, heavy duty additive package, this lubricant provides low bleed as well as high temperature stability, properties critical to modern

INDUSTRIAL

GREASES

MARINE AVIATION


92

GREASES


GREASES ELECTRIC MOTORS Mobil Polyrex™ EM grease is specially formulated for electric motor bearings. Outstanding grease life promotes long-life, high temperature lubrication of ball and roller bearings for long electric Colour, NLGI Product Visual Grade Mobil Polyrex EM

Blue

2

motor life. The advanced polyurea thickener formulation delivers increased durability versus conventional polyurea greases when subjected to mechanical shear forces.

Viscosity, ASTM D445 cSt at cSt at Base Oil V.I., Dropping Point,°C 40°C 100°C ASTM D2270 ASTM D2265 115

Mobil Unirex™ N greases are quality, lithium complex products suitable for high temperature service in rolling element bearings. The lithium complex thickener resists softening and running out of bearings at

12.2

Green Green

2 3

260

temperatures up to 190°C. These versatile greases are recommended for a wide range of industrial applications and are particularly well suited for electric motor lubrication.

Colour, NLGI Thickener Viscosity, ASTM D445 Product Visual Grade Type cSt at 40°C Mobil Unirex N 2 Mobil Unirex N 3

95

Li-Complex Li-Complex

115 115

Base Oil V.I., ASTM D2270


95 95

280 235

Additional Electric Motor Grease Mobilith SHC™ Series............................................ 97

GREASES ENVIRONMENTALLY AWARE Mobil SHC™ Grease 100 EAL Series are high performance greases designed specifically for environmentally sensitive applications. These virtually non-toxic greases are formulated from a biodegradable synthetic ester base oil and a lithium soap thickener. The wax-free Product Mobil SHC Grease 101 EAL Mobil SHC Grease 102 EAL

nature of the synthetic base fluid, together with its low traction coefficient, delivers excellent low temperature pumpability and very low starting and running torque – a significant benefit since many environmentally sensitive applications are located outdoors.

Base Oil ISO VG

Colour, Visual

NLGI Grade

Thickener Type


Water Washout, at 79°C, ASTM D1264, Wt. %

100 100

Tan Tan

1 2

Lithium Lithium

180 180

8.0 6.5



FOOD INDUSTRY (NSF H-1) To obtain the current ‘Reference Listing of Accepted Construction Materials, Packaging Materials and Non-Food Chemical Products’ (including lubricants), please visit the Canadian Food Inspection Agency (CFIA) website.

NLGI Product Grade

Thickener Type

Mobil SHC Polyrex 462

Polyurea

2

highly resistant to water and has excellent corrosion protection for equipment in wet, humid environments and applications where water wash downs are frequent. It resists oxidation and loss of structural stability, often enhancing productivity by enabling lubrication intervals to be safely extended.

Viscosity, ASTM D445 40°C, 100°C, Dropping Point,°C cSt cSt ASTM D2265 460

40

Product Mobilgrease FM 101

270

Water Spray-Off ASTM D4049, % Weight Loss

5

30

Chapter 21, and is NSF ed as an H1 classified lubricant. It is manufactured in facilities ed to the requirements of ISO 21469, helping to ensure that the highest levels of product integrity are maintained.

Colour, Visual

NLGI Grade

Thickener Type



White

1

Aluminum Complex

260

100

ENGER

Mobilgrease™ FM 101 is a high performance multi-purpose grease designed specifically for food processing machinery. Mobilgrease FM 101 is formulated with components meeting the requirements of CFR 178.3570,

Water Washout, 79°C, ASTM D1264, % Weight Loss

COMMERCIAL

Mobil SHC Polyrex™ 462 is a unique combination of synthetic oil, polymer enhancement and a balanced additive system designed to bring solutions to tough lubrication problems. Formulated with advanced Polyurea thickener technology, this advanced lubricant provides high temperature performance while carrying a full NSF H1 registration. Mobil SHC Polyrex 462 is

INDUSTRIAL

GREASES

GREASES Mobil Marvelube™ EP 9F is widely used in industrial and automotive applications requiring economical lubrication under moderate service conditions. This water-resistant grease works well over an operating temperature range of -30°C to 50°C. Extreme pressure Product

Colour, Visual

Marvelube EP 9F

Amber

properties provide good film strength and resistance to wear. Marvelube EP 9F is suitable for steering gearboxes, gear cases of hand tools, chain drives and centralized grease dispensing equipment.

Base Oil Viscosity Thickener Type Structure cSt at 40°C Calcium

57.0

AVIATION

Nebula™ EP Special is recommended for heavily loaded worm gear reducers or enclosed gear units whose design or worn seals may cause excessive leakage with conventional gear oils.

Semi-fluid

This product is specifically recommended for underground mining equipment in severe service. Excellent anti-rust properties help protect equipment subjected to water contamination.

Product

Colour, Visual Thickener Type

Nebula EP Special

Amber

Calcium Sulphonate

Base Oil Viscosity cSt at 40°C 100


Mobilux EP™ 023......................................................98 Click Here to return to PRODUCT APPLICATION INDEX

94

GREASES

Additional Semi-Fluid Greases Mobilith SHC™ Series..............................................97

MARINE

GEARS – ENCLOSED, SEMI-FLUID

GREASES GEARS – OPEN Mobil Geargard™ is a high performance, semisynthetic lubricant designed for use on open gears in grinding mills (rod, ball and SAG). A high flash point non-chlorinated diluent facilitates dispensing through typical mill auto-greasing systems. The solvent is

designed to evaporate after application, leaving an adhesive and cohesive high viscosity lubricating film. Potent additives provide extreme pressure (EP) protection and excellent control of rust and corrosion. Viscosity, ASTM D445 cSt at 40°C cSt at 100°C with diluent w/o diluent

Colour, Flash Point,°C Product Visual Structure with diluent Mobil Geargard

Black

Smooth

Mobil Dynagear™ Series performance open gear lubricants provide outstanding protection of heavily loaded open gear sets exposed to a wide range of operating conditions. Formulated with lithium thickener technology, high performance additives and high Product Mobil Dynagear 600 SL Mobil Dynagear 800 Extra Mobil Dynagear 2000 Mobil Dynagear 4000

Colour, Visual

NLGI Grade

Thickener Type

Black Black Black Black

1 0 0 to 00 00

Lithium Lithium Lithium Lithium

110

5000

1500

viscosity semi-synthetic base fluids, these lubricants synergistically provide a protective film that adheres tenaciously. Mobil Dynagear Series gear lubricants provide excellent dispensability without the use of chlorinated or hydrocarbon solvents.

Molybdenum Disulphide, Wt. %, Structure


>2.0 >2.0 >2.0 >2.0

Dropping Point,°C Viscosity, ASTM D445 ASTM D2265 cSt at 40°C

Smooth Smooth, Semi-fluid Smooth, Semi-fluid Smooth, Semi-fluid

175 198 193 213

620 680 2000 4000


GREASES HIGH TEMPERATURE – CLAY THICKENED stability and a high dropping point, for outstanding high temperature protection. The wax-free synthetic base fluids with their high viscosity index also provide outstanding lubrication at low temperatures.

Product Mobiltemp SHC 32

Colour, Visual

NLGI Grade

Thickener Type



Red

1.5

Clay

260+

32

mineral oil and specially formulated to provide low volatility and excellent resistance to oxidation at high temperatures, along with resistance to water washout and good anti-wear performance under heavy loads and low speeds. Mobiltemp 78 also contains molybdenum disulphide (Moly) for added anti-wear protection.

Product Mobiltemp 2 Mobiltemp 78

Colour, Visual

NLGI Grade

Thickener Type



Amber Grey-black

2 1

Clay Clay

300 300

460 460

ENGER

Mobiltemp™ Series greases are high performance clay-thickened products designed for plain and antifriction bearings operating at low speed and high temperature or under cycling conditions from ambient to high temperatures. The clay thickener, unlike traditional soap thickeners, does not soften at high temperatures. These greases are based on a high quality, high viscosity

COMMERCIAL

Mobiltemp SHC™ 32 is a high performance anti-wear grease primarily intended for high temperature applications. Synthetic base oils deliver excellent resistance to thermal/oxidative degradation. The organo-clay nonsoap thickener provides high temperature structural

INDUSTRIAL

GREASES

Mobil SHC Aware™ Grease EP 2 is a high performance synthetic grease designed specifically for applications which are environmentally sensitive and meets the requirements of the U.S. Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP). This

leading product is readily biodegradable and virtually non-toxic grease and is formulated based on biodegradable saturated ester base oils and a lithium/calcium soap thickener. It does not emulsify and has excellent water wash and salt water corrosion resistance.

Product

Colour, Visual

NLGI Grade

Thickener Type



Mobil SHC Aware Grease EP 2

Amber

2

Calcium/Lithium

>160

150

MARINE

MARINE

AVIATION


96

GREASES


GREASES MULTI-PURPOSE Mobilith SHC™ Series greases are high performance products designed for a wide variety of applications at temperature extremes. They combine the unique features of synthetic base fluids with those of a high quality lithium complex thickener. The wax-free nature of synthetic fluids and the low coefficient of traction (compared with mineral oils) provide excellent low temperature pumpability and very low starting and running torque. These products offer the potential for

energy savings and can reduce operating temperatures in the load zone of spherical roller and ball bearings. The lithium complex thickener contributes excellent adhesion, structural stability and resistance to water. The greases have a high level of chemical stability and are formulated with special additive combinations to deliver excellent protection against wear, rust and corrosion, and to provide operating viscosity at high and low temperatures.

Viscosity, ASTM D445 Colour, NLGI Thickener Dropping Point,°C Product Visual Grade Type cSt at 40°C ASTM D2265 Mobilith SHC 007 Mobilith SHC 100 Mobilith SHC 220 Mobilith SHC 460 Mobilith SHC 1500

Red Red Red Red Red

00 2 2 1.5 1.5

Li-Complex Li-Complex Li-Complex Li-Complex Li-Complex

Mobilgrease XHP™ 220 Series greases are intended for a wide variety of applications and severe operating conditions. These extended service lithium complex greases were designed to outperform our conventional products through cutting edge, proprietary, lithium complex manufacturing technology. They deliver excellent high temperature performance with superb Product Mobilgrease XHP 221 Mobilgrease XHP 222 Mobilgrease XHP 222 Special

Mobilgrease XHP 461 Mobilgrease XHP 462 Mobilgrease XHP 462 Moly

– 265 265 265 265

Dark Blue Dark Blue Grey-Black

1 2 2

Li-Complex Li-Complex Li-Complex

– – 0.75

220 220 220

1 2 2

Dropping Point,°C ASTM D2265 280 280 280

chemical stability and offer excellent protection against rust and corrosion. These greases feature high dropping points and a maximum recommended operating temperature of 140°C. Mobilgrease XHP 462 Moly is fortified with 3% molybdenum disulphide to provide enhanced EP (extreme pressure) and AW (anti-wear) protection in heavily loaded and high sliding applications.

Viscosity, ASTM D445 Colour, NLGI Thickener Molybdenum Visual Grade Type Disulphide, Wt. % cSt at 40°C Dark Blue Dark Blue Grey

– 6 3 3 2.5

adhesion, structural stability and resistance to water contamination. These greases have a high level of chemical stability and offer excellent protection against rust and corrosion. They feature high dropping points and a maximum recommended operating temperature of 140°C. Base oil viscosity is ISO VG 220.

Viscosity, ASTM D445 Colour, NLGI Thickener Molybdenum Visual Grade Type Disulphide, Wt. % cSt at 40°C

Mobilgrease XHP™ 460 Series greases are intended for a wide variety of heavy duty applications and operating conditions. These extended service lithium complex greases were designed to outperform our conventional products through cutting edge, proprietary, lithium complex manufacturing technology. They deliver excellent high temperature performance with superb adhesion, structural stability and resistance to water contamination. These greases have a high level of Product

460 100 220 460 1500

Water Washout, ASTM D1264, 79°C, % Wt. Loss



– – 3

460 460 460

Dropping Point,°C ASTM D2265 280 280 280


GREASES MULTI-PURPOSE water saturated environments, providing rust protection between long re-lubrication intervals. The inherent EP properties exhibit great stability in the presence of water, providing a balance between wear protection and resistance to corrosion.

Water Washout, Colour, NLGI Thickener Viscosity, ASTM D445 Dropping Point,°C ASTM D1264, Product Visual Grade Type cSt at 40°C ASTM D2265 1 hr. at 79°C, % Mobil Centaur XHP 461 Mobil Centaur XHP 462

Amber Amber

1 2

Calcium Sulphonate Calcium Sulphonate

Mobilux™ EP Series lithium hydroxystearate greases are formulated to deliver extra protection against wear, rusting and water washout. They are particularly well

460 460

275 275

Water Spray Resistance, ASTM D4049, mass %

1.0 0.5

25 20

suited for applications in moist or wet conditions. Mobilux EP Series includes one general purpose grease and one special duty semi-fluid lubricant.

Colour, Visual

NLGI Grade

Thickener Type



Mobilux EP 2 Mobilux EP 023

Brown Brown

2 000

Lithium Lithium

190 –

160 320

under load. Epic MQ is particularly recommended for centralized lubrication systems in open-pit mining, as well as severe-service, low temperature applications in forestry and construction. It is fortified with 5 percent molybdenum disulphide, as required by some equipment manufacturers. Epic greases have a long history of excellent performance in the toughest applications and under extreme temperature conditions.

Mobil Epic EP 102 Mobil Epic EP Moly Mobil Epic MQ

Red Grey-Black Grey-Black

1.5 1.5 0.5


0 3 5



260 260 230

130 130 60

MARINE

Molybdenum Colour, NLGI Thickener Disulphide Product Visual Grade Type Content, Wt. %

ENGER

Product

Mobil Epic™ Series are quality, semi-synthetic all-weather greases that deliver excellent lubrication and wear protection at temperatures as low as -50°C and as high as 150°C. They are recommended for multi-service applications in plain and anti-friction bearings, gears, slides and other situations where friction reduction and low wear are required. Epic EP Moly offers additional protection in applications involving heavy loads or slow reciprocating motion

COMMERCIAL

Mobil Centaur XHP™ 460 Series is a family of greases formulated with advanced calcium sulphonate thickener technology, which carries both inherent rust protection and extreme pressure (EP) properties. Relative to conventional soap-base thickeners (lithium, aluminum, calcium), calcium sulphonate excels in

INDUSTRIAL

AVIATION


98

GREASES


GREASES MULTI-PURPOSE Mobil Unirex™ EP Series are extremely versatile long-life performance greases. Their unique formulation protects equipment over a very wide temperature range. Unirex greases are shear and oxidation stable, protect against rust and corrosion and resist softening at elevated temperatures. Unirex Lotemp EP is recommended for winter conditions that require low operating or dispensing limits. Unirex Lotemp Moly and Unirex EP 1 Moly offer performance Product Mobil Unirex EP 0 Mobil Unirex EP 1 Mobil Unirex EP 2 Mobil Unirex EP 0 Moly Mobil Unirex EP 1 Moly Mobil Unirex Lotemp EP Mobil Unirex Lotemp Moly

Colour, Visual

NLGI Grade

Thickener Type

Operating Temp. Range,°C



Green Green Green Grey-Black Grey-Black Green Grey-Black

0.5 1 2 0.5 1 1.5 1.5

Li-Complex Li-Complex Li-Complex Li-Complex Li-Complex Li-Complex Li-Complex

-35 to 110 -30 to 160 -30 to 160 -35 to 110 -30 to 150 -55 to 110 -55 to 110

190 280 300 190 280 260 260

68 220 220 68 220 10 10

Mobil™ Argon EP greases are high quality, shear stable products suitable for use in both plain and anti-friction bearings lubricated by an automatic centralized dispensing system. Argon EP greases are widely used to lubricate mining equipment, bolt and nut formers, vane spindles of hydraulic turbines and a wide range of other machinery serviced by automatic dis Product Mobil Argon EP 0 Mobil Argon EP 1

Mobil Arcan 1

pensing equipment. They are useful over an operating temperature range of 0°C to 95°C. Argon EP 1 is an excellent choice for severe roller bearing service calling for an NLGI No.1 grease. Argon EP greases contain an extreme pressure additive, have a 21 kg Timken OK Load and are recommended where bearings are shock loaded or operating under heavy load conditions.

NLGI Grade

Thickener Type


0 1

Calcium Calcium

135 135

Mobil™ Arcan 1 is a white filler-type grease widely used in bearings and mechanisms to combat severe water contamination. This grease has good adhesion to metal under wet conditions; it stays in place and maintains a lubricating film to protect metal surfaces from corrosion for extended intervals. As a result, Product

characteristics similar to Unirex Lotemp EP and Unirex EP 1 greases respectively; each adds the extreme pressure protection of molybdenum disulphide (Moly). Unirex greases meet the challenges of demanding applications in such industries as transportation, manufacturing, construction, mining, logging, cement, marine and paper-making, where grease must perform well in a multitude of severe applications.

Viscosity, ASTM D445 cSt at 40°C 175 175

Arcan 1 is well suited to such applications as printing machines, laundry and dry cleaning equipment and lubrication of office equipment. It is not recommended for wheel bearings, electric motor bearings or other high speed, grease packed anti-friction bearings. Operating temperature range is -5°C to 110°C.

Colour, Visual

NLGI Grade

Thickener Type


White

1

Lithium

185


Viscosity, ASTM D445 cSt at 40°C cSt at 100°C 100.0

10.0


GREASES OFF-HIGHWAY HEAVY DUTY EQUIPMENT AND ON-HIGHWAY TRUCKING Fortified with 3% molybdenum disulphide (Moly) to complement a robust extreme pressure (EP) additive system, these greases are particularly well suited to the demanding requirements of heavy duty truck chassis, construction and mining equipment, and heavily load industrial bearings.

Water Spray Molybdenum Water Washout, Resistance, Colour, NLGI Thickener Disulphide, Viscosity, ASTM D445 Dropping Point,°C ASTM D1264, ASTM D4049, Product Visual Grade Type Wt. % cSt at 40°C ASTM D2265 1 Hr at 79°C, % mass % Mobil Centaur Moly 1 Mobil Centaur Moly 2

Grey Grey

1 2

Calcium Sulphonate Calcium Sulphonate

3 3

288 280

Orange

2

Li-Complex

Colour, NLGI Thickener Product Visual Grade Type Mobilgrease XHP 100 Mine Mobilgrease XHP 320 Mine Mobilgrease XHP 321 Mine Mobilgrease XHP 322 Mine

Gray-Black Gray-Black Gray-Black Gray-Black

0 0 1 2

Li-Complex Li-Complex Li-Complex Li-Complex

320

Water Washout, ASTM D1264, 1 Hr at 79°C, %

260

6

harsh conditions. They deliver superior performance in bucket pins, pivot pins and heavily loaded chassis components. Mobilgrease XHP 100 Mine and 320 Mine are especially well suited for central lubrication systems in mining and other off-highway equipment requiring an NLGI 0 Grade grease.

Water Washout, Water Sprayoff, Molybdenum Viscosity, ASTM D445 Dropping Point,°C ASTM D1264, ASTM D4049, Disulphide, Wt. % cSt at 40°C ASTM D2265 79°C, % Loss % Loss 5 5 5 5

100 320 320 320

200 270 270 270

– – 10 2

– – 28 16

AVIATION

Additional Off-Highway Heavy Duty Equipment and On-Highway Trucking Greases Mobilgrease XHP™ 220 Series................................ 97 Mobilgrease XHP™ 460 Series................................ 97 Mobil Centaur XHP™ 460 Series............................. 98 Mobil Epic™ Series.................................................. 98 Mobil Unirex™ EP Series......................................... 99


100

GREASES


MARINE

Mobilgrease XHP™ Mine lubricants are specifically designed for extra heavy duty off-highway and mining equipment. These greases have excellent extreme pressure and anti-wear properties, along with exceptional adhesion, very good resistance to water washout and spray-off, with extended service capabilities under

25 20

U-ts, and fifth wheels. It is also recommended for plain and anti-friction bearings in construction and mining vehicles operating in severe service and weather conditions. It is also recommended for heavily loaded industrial bearings. Recommended temperature range: -20°C to +175°C.

Colour, NLGI Thickener Viscosity, ASTM D445 Dropping Point,°C Product Visual Grade Type cSt at 40°C ASTM D2265 Mobil Delvac Xtreme Grease

1.0 1.0

ENGER

Mobil Delvac™ Xtreme Grease is an high performance extreme pressure lubricant. It exhibits excellent resistance to softening and provides good adhesion and cohesion, protection against wear and shock loads, and resistance to high temperature oxidation and rust. Mobil Delvac Xtreme Grease is recommended for use in heavy duty trucks, especially hinge and bucket pins,

320 320

COMMERCIAL

Mobil Centaur™ Moly Series are quality greases formulated with advanced calcium sulphonate thickener technology. Unlike conventional soap-base thickeners (lithium, aluminum, calcium), calcium sulphonate delivers outstanding resistance against the effects of water washout, water spray-off and corrosion.

INDUSTRIAL

GREASES PAPER MACHINES Mobilith SHC™ PM high performance greases are designed specifically for severe-service paper machine applications, including those in extreme temperature environments with exposure to different qualities of water. These lubricants combine the unique features of a synthetic base fluid with a high quality lithium complex thickener. The wax-free synthetic base fluid delivers excellent low temperature pumpability and

low starting and running torque when compared to non-synthetic oil products of the same viscosity; its high viscosity index ensures excellent film protection at high temperatures. The lithium complex thickener contributes excellent adhesion, structural stability and enhanced resistance to water. A special additive system resists rust, corrosion and oxidation and helps protect against wear.

Viscosity, ASTM D445 Dropping Point,°C Colour, NLGI Thickener Product Visual Grade Type cSt at 40°C ASTM D2265 Mobilith SHC PM 220 Mobilith SHC PM 460

Off-White Off-White

1.5 1.5

Li-Complex Li-Complex

Mobil Centaur XHP™ 221 is recommended for rolling element bearings in machinery operating at high temperatures where resistance to water washing and corrosion is important. Such applications include

220 460

275 275

Water Washout, ASTM D1264, 79°C, % Loss 2 3

wet-end paper machine bearings and heavily loaded industrial ball and roller bearings, including those in steel mills and mining.

Water Washout Colour, NLGI Thickener Viscosity, ASTM D445 Dropping Point,°C at 79°C ASTM D, Product Visual Grade Type cSt at 40°C ASTM D2265 1264, Wt. % Mobil Centaur XHP 221

Brown

1.5

Calcium Sulphonate Complex

220

318

1

Additional Paper Machine Greases Mobilgrease XHP™ 460 Series............................. 97 Mobil Unirex™ EP Series...................................... 99

GREASES PNEUMATIC TOOLS/AIR-LINE LUBRICATED Mobil Arox™ NM 000 is an extreme pressure, semi-fluid grease designed specifically to provide a mist-free, non-toxic environment for air-line lubricated pneumatic tools, including rock drills, jackhammers, drifters, wagon drills, chippers, tampers, riveters,

impact tools and pavement breakers. Low-odour, friction-and-wear-reducing additives also have emulsifying properties and help protect metal surfaces from corrosion and rust.

Product

Viscosity, ASTM D445 Colour, NLGI Thickener Visual Grade Type cSt at 40°C

Arox NM 000

Amber

000


Calcium

140


GREASES RAILWAY

Product Arapen RB 320

withstand shear, i.e. retain consistency after prolonged working, as in the churning action of an anti-friction bearing. Arapen RB 320 maintains good seal performance, a significant requirement for shop-to-shop wheel service. It also resists heat, rust and structural change in the presence of water.

Colour, Visual

NLGI Grade

Thickener Type



Light Amber

1.5

Calcium-Lithium

180

14.7

Galena™ Tramo 3735 is a sulphur-phosphorus extreme pressure traction-motor gear lubricant designed for all locomotives, including the newest,

high horsepower per axle units. It delivers excellent protection in severe temperatures, summer and winter, for effective all-season lubrication.

Viscosity, ASTM D445 Colour, Thickener Visual Type cSt at 100°C

Product

Black

Lithium

200.0

ENGER

Galena Tramo 3735

COMMERCIAL

Arapen™ RB 320 is a long-life grease developed for the roller bearings of railroad car journals where no provision is made for in-service relubrication. It has high oxidation stability and is highly resistant to chemical deterioration that might produce acids or deposits detrimental to bearing life. It has exceptional ability to

INDUSTRIAL

GREASES DRILLING

Product DDR Grease

At the same time, drill rods and ts may be washed by the sludge water used to force rock particulate upwards from the hole. DDR Grease is recommended for lubrication of diamond drill rods, on the surface or underground. It is normally applied by brush or hand and smeared over the drill rods where they are stacked.

Colour, Visual

NLGI Grade

Thickener Type



Tan

3

Barium Complex

170

320.0

MARINE

DDR Grease is a very tacky and adhesive lubricating grease, formulated to stay in place in severe-service diamond drilling operations. The primary function of a drill rod grease is to reduce friction of the drill rod against the walls of the hole. This can be a considerable task when long lengths of pipe weave in the drill hole.

AVIATION


102

GREASES


GREASES SPECIALTY SYNTHETIC Mobil SHC™ PF 462 grease is a long-life, severeservice lubricant for bearings, valves, seals and other applications requiring oxidation stability and lubrication performance at high temperatures. Formulated with perfluoropolyether thickened with polytetrafluoroethylene,

Viscosity, ASTM D445 cSt at cSt at Dropping Point,°C 40°C 100°C ASTM D2265

NLGI Product Grade Mobil SHC PF 462

2

440

42

Mobil Beacon 325

Water Washout, 79°C, ASTM D1264, % Loss

258

Mobil Beacon™ 325 is a high performance grease specifically formulated for precision equipment operating at moderate and low temperatures. Formulated with a synthetic base oil of extremely low viscosity and low volatility plus a lithium soap thickener, Beacon 325 delivers good mechanical stability, high resistance to Product

Mobil SHC PF 462 provides dependable performance up to 240˚ C and has excellent lubricity, corrosion resistance, thermal and oxidative stability and chemical inertness.

0.94

Water Spray-Off, ASTM D4049, % Weight Loss

5

water and extremely high oxidation stability. As the base oil viscosity is low and the viscosity index of the fluid is high, the grease has excellent low temperature properties, including low starting and running torque at very cold temperatures and good pumpability.

Colour, Visual

NLGI Grade

Thickener Type



Tan

2

Lithium

180

12

GREASES THREADS Thredkote™ 706 is a simple soap grease containing graphite and metallic fillers such as lead, zinc and copper. It is designed for the lubrication of threads on casings, tubing and line ts in the oil drilling industry

and has been used successfully in Canada for many years. It is also used in the connection of high pressure steam lines and non-potable water lines.

Penetration, Viscosity, ASTM D445 Colour, NLGI mm/10 @ 25°C Product Visual Grade Dropping Point,°C cSt at 40°C % Graphite worked 60 strokes Thredkote 706

–

1

91


–

18

330


GREASES THREADS

Product Z-50 Pipe Dope

Z-50 Pipe Dope is recommended for bolts, nuts and threaded fittings where tightness of the t and ease of removal are desired. This product meets or exceeds the requirements of API recommended practice 7A1 for Rotary Shouldered Connection Thread Compounds. Its operating temperature range is -15°C to 150°C.

Colour, Visual

NLGI Grade



Grey-Black

1

91

12

GREASES

Mobil SHC™ Grease 460 WT is a high performance product especially suited to meet or exceed the demanding requirements of wind turbine applications at temperature extremes. The wax-free nature of the synthetic base fluids and their low coefficient of traction provide excellent low temperature pumpability

and very low starting and running torque. The lithium complex thickener contributes excellent adhesion, structural stability and resistance to water. The grease has a high level of chemical stability. Special additive combinations provide excellent protection against wear, rust and corrosion at high and low temperatures.

Water Washout, Viscosity, ASTM D445 Dropping Point,°C Colour, NLGI Thickener ASTM D1264, Product Visual Grade Type cSt at 40°C ASTM D2265 Loss at 79°C, % wt 1.5

Li-Complex

460

255

10

MARINE

Red

ENGER

WIND TURBINES

Mobil SHC Grease 460 WT

COMMERCIAL

Z-50 Pipe Dope is an anti-seize compound recommended for a wide variety of applications. In oil field operations, it is used on the threads of new drill pipe and can also be applied as a sealing compound on the threads of semi-permanent ts, as when casing is set. In automotive and industrial applications,

INDUSTRIAL

GREASES WIRE ROPES

Product Wire Rope Dressing

Colour, Visual Structure Black

Smooth

Thickener Type


Lithium

205


320


104

GREASES


is formulated with non-asphaltic mineral base stocks, which minimize peeling, cracking and flaking off in cold weather. It contains molybdenum disulphide and solid graphite lubricant as well as additives to resist water and protect wire rope from rust and corrosion.

AVIATION

Wire Rope Dressing is an all-season, multi-purpose lubricant for hoist drum wire ropes in underground mining, dragline or electro-mechanical shovel operations. At ambient temperatures between -40°C and 50°C, wire ropes are protected by a tenacious film that adheres firmly to the rope. Wire Rope Dressing

APPENDICES Temperature Conversion Table Locate in the centre column of the three columns the temperature in °C or °F to be converted. For given Celsius temperatures, read Fahrenheit equivalent in the left-hand column. For given Fahrenheit temperatures, read the Celsius equivalent in the right-hand column. Examples: a. Given -30°C; convert to Fahrenheit. Locate -30 in the centre column; read -22.0°F in the left-hand column. b. Given -30°F; convert to Celsius. Locate -30 in the centre column; read -34.4°C in the right-hand column. For temperatures not shown, interpolate from the values listed or use the following equations: °C = (°F - 32) x 5 °F = °C x 9 + 32 9 5

To °F

From °C or °F

To °C

To °F

From °C or °F

To °C

To °F

-148.0 -130.0 -112.0 -94.0 -76.0 -58.0 -54.4 -50.8 -47.2 -43.6 -40.0 -36.4 -32.8 -29.2 -25.6 -22.0 -18.4 -14.8 -11.2 -7.6 -4.0 -0.4 +3.2 +6.8 +10.4 +14.0 +15.8 +17.6 +19.4 +21.2

-100 -90 -80 -70 -60 -50 -48 -46 -44 -42 -40 -38 -36 -34 -32 -30 -28 -26 -24 -22 -20 -18 -16 -14 -12 -10 -9 -8 -7 -6

-73.3 -67.8 -62.2 -56.7 -51.1 -45.6 -44.4 -43.3 -42.2 -41.1 -40.0 -38.9 -37.8 -36.7 -35.6 -34.4 -33.3 -32.2 -31.1 -30.0 -28.9 -27.8 -26.7 -25.6 -24.4 -23.3 -22.8 -22.2 -21.7 -21.1

+23.0 +24.8 +26.6 +28.4 +30.2 +32.0 +33.3 +35.6 +37.4 +39.2 +41.0 +42.8 +44.6 +46.4 +48.2 +50.0 +51.8 +53.6 +55.4 +57.2 +59.0 +60.8 +62.6 +64.4 +66.2 +68.0 +69.8 +71.6 +73.4 +75.2

-5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +10 +11 +12 +13 +14 +15 +16 +17 +18 +19 +20 +21 +22 +23 +24

-20.6 -20.0 -19.4 -18.9 -18.3 -17.8 -17.2 -16.7 -16.1 -15.6 -15.0 -14.4 -13.9 -13.3 -12.8 -12.2 -11.7 -11.1 -10.6 -10.0 -9.4 -8.9 -8.3 -7.8 -7.2 -6.7 -6.1 -5.6 -5.0 -4.4

+77.0 +78.8 +80.6 +82.4 +84.2 +86.0 +87.8 +89.6 +91.4 +93.2 +95.0 +96.8 +98.6 +100.4 +102.2 +104.0 +106.8 +107.6 +109.4 +111.2 +113.0 +114.8 +116.6 +118.4 +120.2 +122.0 +123.8 +125.6 +127.4 +129.2


From °C or °F +25 +26 +27 +28 +29 +30 +31 +32 +33 +34 +35 +36 +37 +38 +39 +40 +41 +42 +43 +44 +45 +46 +47 +48 +49 +50 +51 +52 +53 +54

To °C -3.9 -3.3 -2.8 -2.2 -1.7 -1.1 -0.6 0.0 +0.6 +1.1 +1.7 +2.2 +2.8 +3.3 +3.9 +4.4 +5.0 +5.6 +6.1 +6.7 +7.2 +7.8 +8.3 +8.9 +9.4 +10.1 +10.6 +11.1 +11.7 +12.2


APPENDICES

Temperature Conversion Table

+131.0 +132.8 +134.6 +136.4 +138.2 +140.0 +141.8 +143.6 +145.4 +147.2 +149.0 +150.8 +152.6 +154.4 +156.2 +158.0 +159.8 +161.6 +163.4 +165.2 +167.0 +168.8 +170.6 +172.4 +174.2 +176.0 +177.8 +179.6 +181.4 +183.2 +185.0 +186.8 +188.6 +190.4 +192.2 +194.0 +195.8 +197.6 +199.4 +201.2 +203.0 +204.8 +206.6 +208.4 +210.2 +212.0 +213.8 +215.6 +217.4 +219.2

+55 +56 +57 +58 +59 +60 +61 +62 +63 +64 +65 +66 +67 +68 +69 +70 +71 +72 +73 +74 +75 +76 +77 +78 +79 +80 +81 +82 +83 +84 +85 +86 +87 +88 +89 +90 +91 +92 +93 +94 +95 +96 +97 +98 +99 +100 +101 +102 +103 +104

To °C +12.8 +13.3 +13.9 +14.4 +15.0 +15.6 +16.1 +16.7 +17.2 +17.8 +18.3 +18.9 +19.4 +20.0 +20.6 +21.1 +21.7 +22.2 +22.8 +23.3 +23.9 +24.4 +25.0 +25.6 +26.1 +26.7 +27.2 +27.8 +28.3 +28.9 +29.4 +30.0 +30.6 +31.1 +31.7 +32.2 +32.8 +33.3 +33.9 +34.4 +35.0 +35.6 +36.1 +36.7 +37.2 +37.8 +38.3 +38.9 +39.4 +40.0

To °F

From °C or °F

+221.0 +222.8 +224.6 +226.4 +228.2 +230.0 +231.8 +233.6 +235.4 +237.2 +239.0 +240.8 +242.6 +244.4 +246.2 +248.0 +251.6 +255.2 +258.8 +262.4 +266.0 +269.6 +273.2 +276.8 +280.4 +284.0 +287.6 +291.2 +294.8 +298.4 +302.0 +305.6 +309.2 +312.8 +316.4 +320.0 +323.6 +327.2 +330.8 +334.4 +338.0 +341.6 +345.2 +348.8 +352.4 +356.0 +359.6 +363.2 +366.8 +370.4


+105 +106 +107 +108 +109 +110 +111 +112 +113 +114 +115 +116 +117 +118 +119 +120 +122 +124 +126 +128 +130 +132 +134 +136 +138 +140 +142 +144 +146 +148 +150 +152 +154 +156 +158 +160 +162 +164 +166 +168 +170 +172 +174 +176 +178 +180 +182 +184 +186 +188

To °C +40.6 +41.1 +41.7 +42.2 +42.8 +43.3 +43.9 +44.4 +45.0 +45.6 +46.1 +46.7 +47.2 +47.8 +48.3 +48.9 +50.0 +51.1 +52.2 +53.3 +54.4 +55.6 +56.7 +57.8 +58.9 +60.0 +61.1 +62.2 +63.3 +64.4 +65.6 +66.7 +67.8 +68.9 +70.0 +71.1 +72.2 +73.3 +74.4 +75.6 +76.7 +77.8 +78.9 +80.0 +81.1 +82.2 +83.3 +84.4 +85.6 +86.7

To °F +374.0 +377.6 +381.2 +384.8 +388.4 +392.0 +395.6 +399.2 +402.8 +406.4 +410.0 +413.6 +417.2 +420.8 +424.4 +428.0 +437.0 +446.0 +455.0 +464.0 +473.0 +482.0 +491.0 +500.0 +509.0 +518.0 +527.0 +536.0 +545.0 +554.0 +563.0 +572.0 +590.0 +608.0 +626.0 +644.0 +662.0 +680.0 +698.0 +716.0 +734.0 +752.0 +932.0 +1112.0 +1292.0 +1472.0 +1652.0 +1832.0 +2012.0 +2192.0

From °C or °F

To °C

+190 +192 +194 +196 +198 +200 +202 +204 +206 +208 +210 +212 +214 +216 +218 +220 +225 +230 +235 +240 +245 +250 +255 +260 +265 +270 +275 +280 +285 +290 +295 +300 +310 +320 +330 +340 +350 +360 +370 +380 +390 +400 +500 +600 +700 +800 +900 +1000 +1100 +1200

+87.8 +88.9 +90.0 +91.1 +92.2 +93.3 +94.4 +95.6 +96.7 +97.8 +98.9 +100.0 +101.1 +102.2 +103.3 +104.4 +107.2 +110.0 +112.8 +115.6 +118.3 +121.1 +123.9 +126.7 +129.4 +132.2 +135.0 +137.8 +140.6 +143.3 +146.1 +148.9 +154.4 +160.0 +165.6 +171.1 +176.7 +182.2 +187.8 +193.3 +198.9 +204.4 +260.0 +315.6 +371.1 +427.0 +482.0 +538.0 +593.0 +649.0


106

ALPHABETICAL INDEX OF PRODUCTS

From °C or °F

APPENDICIES

To °F

(continued)

APPENDICES Viscosity Conversion Table Kinematic Redwood Kinematic Redwood Kinematic Redwood cSt 40 C SUS Engler No. 1 Sec. cSt 40 C SUS Engler No. 1 Sec. cSt 40 C SUS Engler No. 1 Sec.

2 32.6 1.14 30.8 3 36.0 1.22 33.2 4 39.1 1.31 35.8 5 42.5 1.40 38.4 6 45.7 1.48 41.0 7 49.0 1.56 43.7 8 52.0 1.65 46.5 9 55.7 1.74 49.2 10 59.0 1.83 52.1 11 62.5 1.92 55.2 12 66.2 2.02 58.4 13 70.0 2.12 61.6 15 77.5 2.32 68.2 17 85.5 2.55 75.2 19 94 2.77 82.8 21 100 3.00 90.4 23 111 3.23 98 25 120 3.46 106 28 133 3.83 117 30 142 4.09 125 33 155 4.46 137 35 164 4.71 145 38 178 5.10 157 40 187 5.35 166 43 200 5.75 178

46 214 6.15 190 50 233 6.65 207 55 256 7.25 228 60 279 7.9 248 65 302 8.6 268 70 325 9.25 286 75 349 9.85 307 80 372 10.5 329 85 395 11.2 349 90 418 11.8 370 95 442 12.5 390 100 465 13.2 410 110 511 14.5 450 120 558 15.8 490 130 605 17.1 530 140 649 18.4 570 150 695 19.7 620 160 742 21.0 660 170 788 22.5 700 180 834 24.0 740 190 881 25.0 780 200 927 26.0 820 210 973 28.0 860 220 1020 29.0 900 230 1066 30.0 940

240 1112 32 990 250 1159 33 1030 260 1205 34 1070 270 1251 36 1110 280 1297 37 1150 290 1344 38 1190 300 1390 40 1230 315 1460 41 1300 330 1529 43 1350 350 1622 46 1440 370 1715 49 1520 390 1807 51 1600 410 1900 54 1690 430 1990 57 1770 450 2090 59 1850 470 2180 62 1930 490 2270 64 2010 500 2320 66 2050 550 2540 72 2260 600 2780 79 2460 650 3010 86 2670 700 3240 92 2880 750 3470 99 3080 800 3700 105 3280

Dynamic Viscosity to Kinematic Viscosity Calculation To convert from dynamic viscosity units, centipoise (), to kinematic viscosity units, centistokes (cSt), use the following equation: cSt = Density (kg/L) Note: Viscosity and density must be measured at the same temperature. If viscosity is known at two or more different temperatures, viscosity at other temperatures can be estimated using standard charts or equations. Charts are available from your Imperial sales representative or technical services department.



0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150 50,000


TEMPERATURE, DEGREES CELSIUS /TEMPÉRATURE, DEGRÉS CELSIUS

3.0 150

3.0 140

4.0

4.0

130

5.0

5.0

120

6.0

6.0

110

7.0

7.0

100

8.0

8.0

90

10 9.0

10 9.0

80

15

15

70

20

20

60

30

30

50

40

40

40

50

50

30

75

75

20

100

100

10

150

150

0

200

200

-10

300

300

-20

500 400

500 400

-40

1,000

3,000

5,000 2,000

-30

VISCOSITY – TEMPERATURE CHART RELATION VISCOSITÉ – TEMPÉRATURE

1,000



APPENDICIES

2,000

3,000

5,000

10,000

-10

20,000

-20

10,000

-30

20,000

-40 50,000

APPENDICES

108

KINEMATIC VISCOSITY, CENTISTOKES /VISCOSITÉ CINÉMATIQUE, CENTISTOKES

APPENDICES SAE Viscosity Grades for Engine Oils SAE Viscosity Grade

Low-temperature Cranking Viscosity1 at °C, Max.

0W 5W 10W 15W 20W 25W 20 30 40 40 50 60

6,200 @ -35 6,600 @ -30 7,000 @ -25 7,000 @ -20 9,500 @ -15 13,000 @ -10 — — — — — —

Low-temperature Low Shear Rate Low Shear Rate Pumping Viscosity Kinematic Kinematic High Shear Rate 2 3 with no yield-stress Viscosity Viscosity3 Viscosity4 at °C, Max. cSt at 100°C, Min. cSt at 100°C, Max. at 150°C, Min. 60,000 @ -40 60,000 @ -35 60,000 @ -30 60,000 @ -25 60,000 @ -20 60,000 @ -15 — — — — — —

3.8 3.8 4.1 5.6 5.6 9.3 5.6 9.3 12.5 12.5 16.3 21.9

— — — — — — <9.3 <12.5 <16.3 <16.3 <21.9 <26.1

— — — — — — 2.6 2.9 2.95 3.76 3.7 3.7

Note: 1 = 1mPa*s; 1cSt = 1mm2/s. All values are critical specifications as defined by ASTM D 3244. 1 ASTM D 5393 2 ASTM D 4684; note that the presence of any yield-stress detectable by this method constitutes a failure regardless of viscosity 3 ASTM D 445 4 ASTM D 4683, CEC L-36-A-90 (ASTM D 4741) or ASTM D 5481 5 0W-40, 5W-40 and 10W-40 6 15W-40, 20W-40, 25W-40 and 40

SAE J306 Viscosity Grades for Gear Oils SAE iscosity Grade V 70W 75W 80W 85W 80 85 90 140 250 1

Maximum Temperature for Brookfield Viscosity of 150,000 °C

Kinematic Viscosity at 100°C Min.1 Max.

-55 -40 -26 -12 — — — — —

4.1 — 4.1 — 7.0 — 11.0 — 7.0 <11.0 11.0 <13.5 13.5 <24.0 24.0 <41.0 41.0 —

Limits must also be met after testing in CEC L-45-T-93 Method C (20 hours)

Classification of Greases by National Lubricating Grease Institute (NLGI) Consistency Numbers1 NLGI Grade No.

60-stroke Worked Penetration at 25°C Min. Max.

000 445 475 00 400 430 0 355 385 1 310 340 2 265 295

NLGI Grade No.

60-stroke Worked Penetration at 25°C Min. Max.

3 220 250 4 175 205 5 130 160 6 85 115

The grades are defined as ranges of the values of the 60-stroke worked penetration, in tenths of millimetres, as determined by ASTM D 217, ‘Cone Penetration of Lubricating Grease.’

1



APPENDICES

Understanding Oil Analysis APPENDICIES

VISCOSITY Probably the most important single property of a lubricating oil. It is a major factor in the development of the load-carrying ability of an oil. It is defined as resistance to flow at 40 degrees Centigrade and typically reported in Centistokes (cSt). WEAR METALS The presence of these metals can indicate a wear problem on a microscopic level before the problem can be detected by conventional means. The existence of a wear problem is determined not only by absolute values of metals, but more importantly by a relative increase or trend in one or more of these metals. Metal Sources

Metal Sources

Iron

Cylinders, Gears, Rings, Crankshafts, Liners, Bearings, Rust

Tin

Bearing Plating, Compressors

Chromium

Rings, Bearing and Liner Plating

Aluminum

Pistons, Bearing and Pump, Blower and Compressor Impellers

Lead

Bearing Overlays

Nickel Valves

Copper

Hydraulic Pumps, Bearing Cages, Bushings, Bronze Components

Silver

Bearing and Bushing Plating

Manganese

Trace Element in Gas Turbine Components

CONTAMINANTS These elements can be an indicator of contamination. The combination of contaminant and wear metals can indicate a harmful machine operating condition. Contaminant Sources

Silicone Boron Sodium Potassium Acid Oxidation

Water Anti-freeze, Process Water, Condensation Glycol Anti-freeze Fuel Fuel System Soot Incomplete Combustion, Blow-by Chlorine Land Fill Gas, Sea Water

Abrasive Dirt, Sealant, Defoamant Anti-freeze, Oil Additive Anti-freeze, Oil Additive Anti-freeze, Oil Additive Oil Degradation (TAN) Thermal Degradation of Oil


Contaminant Sources

ADDITIVES A chemical substance added to oil to impart or improve certain properties. Additive Functions

Additive Functions

Magnesium Dispersant/Detergent (TBN) Calcium Dispersant/Detergent (TBN) Barium Dispersant/Detergent

Phosphorus Anti-wear Zinc Anti-wear Molybdenum Anti-wear

For further information your Imperial sales representative or go to signumoilanalysis.com.



110

APPENDICES ANSI-AGMA Industrial Gear Lubricants 9005-D94

R&O Inhibited Gear Oil AGMA Lubricant No.

Viscosity Range cSt at 40°C

Extreme Pressure Gear Oil AGMA Lubricant No.

Synthetic Gear Oil AGMA Lubricant No.

0 1 2 3 4 5 6 7, 7 Comp* 8, 8 Comp* 8A Comp* 9 10 11 12 13 14R** 15R**

28.8 to 35.2 41.4 to 50.6 61.2 to 74.8 90 to 110 135 to 165 198 to 242 288 to 352 414 to 506 612 to 748 900 to 1100 1350 to 1650 2880 to 3520 4140 to 5060 6120 to 7480 190-220 at 100°C*** 428.5 to 857.0 at 100°C*** 857.0 to 1714.0 at 100°C***

None None 2 EP 3 EP 4 EP 5 EP 6 EP 7 EP 8 EP 8A EP 9 EP 10 EP 11 EP 12 EP 13 EP None None

0S 1S 2S 3S 4S 5S 6S 7S 8S None 9S 10 S 11 S 12 S 13 S None None

AGMA Lubricant No.

ISO Viscosity Grade

Mobil Product

Mobil Synthetic Product

0 1 2 3 4 5 6 7

32 46 68 100 150 220 320 460

Mobil DTE Oil Light Mobil DTE Oil Medium Mobil DTE Oil Heavy Medium Mobil DTE Oil Heavy Mobil DTE Oil Extra Heavy Mobil DTE Oil BB Mobil DTE Oil AA Mobil DTE Oil HH

Mobil SHC 624 Mobil SHC 625 Mobil SHC 626 Mobil SHC 627 Mobil SHC 629 Mobil SHC 630 Mobil SHC 632 Mobil SHC 634

AGMA Compounded

ISO Viscosity Grade

Mobil Product

7 Comp* 8 Comp* 8A Comp*

460 680 1000

Mobil 600W Super Cylinder Oil Mobil Extra Hecla Super Cylinder Oil Mobil Extra Hecla Super Cylinder Oil Mineral

AGMA Lubricant No.

ISO Viscosity Grade

2 EP 68 3 EP 100 4 EP 150 5 EP 220 6 EP 320 7 EP 460 8 EP 680 8A EP 1000 9 EP 1500 10 EP 11 EP 12 EP 13 EP 14R** 15R**

Mobil Product

Mobil Synthetic Product

Mobilgear 600 XP 68 Mobilgear 600 XP 100 Mobilgear 600 XP 150 Mobilgear 600 XP 220 Mobilgear 600 XP 320 Mobilgear 600 XP 460 Mobilgear 600 XP 680 None None Mobiltac LL None Mobiltac MM Mobiltac QQ None Mobiltac 325 NC, 375 NC

None None Mobil SHC Gear 150 Mobil SHC Gear 220 Mobil SHC Gear 320 Mobil SHC Gear 460 Mobil SHC Gear 680 Mobil SHC Gear 1000 Mobil SHC Gear 1500 Mobil SHC Gear 3200 None Mobil SHC Gear 6800 None None None

* Oils marked “Comp” are compounded with 3% to 10% fatty or synthetic fatty oils. ** Residual compounds-diluent type, commonly known as solvent cutbacks, are heavy oils containing a volatile, non-flammable diluent for ease of application. The diluent evaporates leaving a thick film of lubricant on the gear teeth. Viscosities listed are for the base compound without diluent. *** Viscosities of AGMA Lubricant Number 13 and above are specified at 100°C (210°F) as measurement of viscosities of these heavy lubricants at 40°C (100°F) would not be practical.



ALPHABETICAL LIST OF PRODUCTS

Mobil 1™.....................................................................................................................74 Mobil 1™ Advanced Fuel Economy............................................................................. 74 Mobil 1™ ESP Formula M 5W-40................................................................................75 Mobil 1™ ESP X1 0W-30............................................................................................75

APPENDICIES

Mobil 1™ Extended Performance 5W-20, 5W-30 and 10W-30....................................75 Mobil 1™ Racing 4T....................................................................................................78 Mobil 1™ Synthetic ATF..............................................................................................77 Mobil 1™ Synthetic Gear Lube LS..............................................................................78 Mobil 1™ Synthetic Grease.........................................................................................91 Mobil 1™ Turbo Diesel Truck 5W-40............................................................................ 76 Mobil Aero™ HFA........................................................................................................86 Arapen™ RB 320...................................................................................................... 102 Mobil™ Arcan 1...........................................................................................................99 Mobil™ Argon EP........................................................................................................99 Mobil Arox™ EP Series...............................................................................................48 Mobil Arox™ NM 000................................................................................................. 101 Mobil™ Aviation Grease SHC 100...............................................................................85 Mobil Beacon™ 325.................................................................................................. 103 Canthus™ 680.............................................................................................................45 Mobil Centaur™ Moly Series..................................................................................... 100 Mobil Centaur XHP™ 221......................................................................................... 101 Mobil Centaur XHP™ 460 Series................................................................................98 Mobil™ Chainoil.......................................................................................................... 18 Mobil™ Compressor Oils.............................................................................................24 Mobil™ Compressor Oils 264 and 460........................................................................24


Mobil™ Compressor Oil N 100....................................................................................24 Mobil™ Cylinder Oils ..................................................................................................25 DDR Grease.............................................................................................................. 102 Mobil Delvac 1™ ESP 5W-40 and 0W-40...................................................................60 Mobil Delvac 1™ LE 5W-30.........................................................................................60 Mobil Delvac™ 1300 Super 10W-30 and F2 15W-40..................................................61 Mobil Delvac™ 1230 and 1240....................................................................................61 Mobil Delvac™ 1640....................................................................................................61 Mobil Delvac™ CNG/LNG 15W-40..............................................................................62 Mobil Delvac™ Elite 10W-30 and 15W-40...................................................................60 Mobil Delvac™ Elite 222 0W-30..................................................................................60 Mobil Delvac™ Extended Life Coolant/Antifreeze – C Series.....................................69 Mobil Delvac™ Synthetic ATF......................................................................................63 Mobil Delvac™ Synthetic Final Drive and Axle Oil.......................................................63 Mobil Delvac™ Synthetic Gear Oils.............................................................................63 Visit mobil.ca /pds for the most current product information


112

ALPHABETICAL LIST OF PRODUCTS Mobil Delvac™ Synthetic Transmission Fluid 50.........................................................63 Mobil Delvac™ Xtreme Grease................................................................................. 100 Mobil™ Dexron®-VI ATF...............................................................................................77 DIOL™ 9 RD Series....................................................................................................62 Mobil DTE 10 Excel™ Series......................................................................................37 Mobil DTE™ 20 Series................................................................................................38 Mobil DTE™ 724 Oil....................................................................................................53 Mobil DTE™ 732 M.....................................................................................................53 Mobil DTE™ 700 Series..............................................................................................53 Mobil DTE™ 800 Series..............................................................................................52 Mobil DTE™ 932 GT...................................................................................................52 Mobil DTE™ FM Series...............................................................................................27 Mobil DTE™ Oil 205 ...................................................................................................25 Mobil DTE™ Oil Named Series...................................................................................20 Mobil DTE™ PM Series..............................................................................................47 Mobil Dynagear™ Series.............................................................................................95 Mobil Epic™ Series.....................................................................................................98 Exxcolub™ SCF PG....................................................................................................22 Exxcolub™ SCF PS....................................................................................................22 Exxcolub™ SCF M2....................................................................................................22 Exxon™ Aviation Oil Elite 20W-50...............................................................................86 Exxon HyJet™ IV-A Plus.............................................................................................85 Faxam™......................................................................................................................45 Mobil Fenso™ Series..................................................................................................48 Formesso™ Summer Grade.......................................................................................43 Forum™ EP 46 and 68................................................................................................40 Galcar All Year.............................................................................................................68 Galena™ Tramo 3735................................................................................................ 102 Mobil Gargoyle™ Arctic Oils........................................................................................49 Mobil Gargoyle Arctic SHC™ 200 Series................................................................... 49 Mobil Geargard™........................................................................................................95 Mobil Geargard™ HVS................................................................................................36 Mobil GEO™ 15W-40 .................................................................................................62 Mobil Glygoyle™ 22.....................................................................................................49 Mobil Glygoyle™ Series..............................................................................................35 Mobil Glygoyle™ Numbered Series............................................................................. 19 Mobil™ Heavy Duty (HD) Chainoil.............................................................................. 18 Mobil™ Heavy Duty SCA Precharged Coolant/Antifreeze...........................................69 Mobil Hydraul™...........................................................................................................68 Mobil Iogear™ EP 100.................................................................................................36




Mobil Jet Oil™ II..........................................................................................................86 Mobil Jet Oil™ 254......................................................................................................86 Mobil Marvelube™ EP 9F............................................................................................94 Millcot™ K................................................................................................................... 18 Mobil™ Multi-Vehicle ATF............................................................................................77

APPENDICIES

Mobil Nuto™ H Series.................................................................................................40 Mobil Nyvac™ FR 200D..............................................................................................41 Mobil Pegasus™ 1.......................................................................................................29 Mobil Pegasus™ 605...................................................................................................31 Mobil Pegasus™ 610...................................................................................................30 Mobil Pegasus™ 710...................................................................................................30 Mobil Pegasus™ 801 Series .......................................................................................31 Mobil Pegasus™ 805...................................................................................................29 Mobil Pegasus™ AGX.................................................................................................31 Mobil Pegasus™ GLX.................................................................................................30 Mobil Pegasus™ GMA................................................................................................29 Mobil Polyrex™ EM.....................................................................................................93 Mobil Pyrogard™ 53....................................................................................................41 Mobil Rarus™ 427 ......................................................................................................21 Mobil Rarus™ 800 Series...........................................................................................21 Mobil Rarus SHC™ 1020 Series.................................................................................21 Mobil Ronex™ MP.......................................................................................................91 Mobil™ Sawguide Oils................................................................................................45 Mobil SHC™ 500 Series.............................................................................................37 Mobil SHC™ 600 Series............................................................................................. 19


Mobil SHC™ 800 Series.............................................................................................52 Mobil SHC Aware™ Grease EP 2...............................................................................83 Mobil SHC Aware™ H Series......................................................................................83 Mobil SHC Cibus™ Series..........................................................................................27 Mobil SHC™ Gear OH Series.....................................................................................35 Mobil SHC Gear™ 1500, 3200, and 6800...................................................................33 Mobil SHC Gear™ 46M...............................................................................................36 Mobil SHC Gear™ Series (ISO VG 150-1000)............................................................33 Mobil SHC™ Grease 100 EAL Series.........................................................................93 Mobil SHC™ Grease 460 WT.................................................................................... 104 Mobil SHC Pegasus™ 30............................................................................................29 Mobil SHC™ PF 462................................................................................................. 103 Mobil SHC™ PM Series..............................................................................................47 Mobil SHC Polyrex™ 462............................................................................................94 Mobil Super™ 1000..................................................................................................... 76 Visit mobil.ca /pds for the most current product information


114

ALPHABETICAL LIST OF PRODUCTS Mobil Super™ 2000..................................................................................................... 76 Mobil Super™ 3000..................................................................................................... 76 Mobil ATF™ +4............................................................................................................77 Mobil ATF™ 3309........................................................................................................77 Mobil ATF™ D/M..........................................................................................................77 Mobil™ Synthetic Oven Lube 1090.............................................................................46 Mobil Synturion™ 6.....................................................................................................46 Mobil™ System Cleaner..............................................................................................46 Mobil Teresso™...........................................................................................................54 Mobil Teresso™ GTC Series.......................................................................................54 Mobil Teresstic™ AC 32...............................................................................................24 Mobil Teresstic™-C......................................................................................................20 Mobil Teresstic™ V 150...............................................................................................20 Mobil Unirex™ EP Series............................................................................................99 Mobil Unirex™ N..........................................................................................................93 Mobil Univis™ BIO-C 40..............................................................................................39 Mobil Univis™ Extra....................................................................................................38 Mobil Univis™ HVI 13..................................................................................................39 Mobil Univis™ N-C Series...........................................................................................39 Mobil Univis™ Ultra.....................................................................................................38 Mobil Vactra™ Oil Numbered Series...........................................................................55 Mobil Vacuoline™ 500 Series...................................................................................... 19 Mobil Vacuoline™ 1400 Series....................................................................................55 Mobil Vaprotec™ Light.................................................................................................50 Mobil Velocite™ Oil Numbered Series.........................................................................51 Mobil Zerice™ S Oils...................................................................................................49 Mobilarma™ 245.........................................................................................................50 Mobilarma™ 700 Series..............................................................................................50 Mobilcut™ 100.............................................................................................................42 Mobilcut™ 140.............................................................................................................43 Mobilcut™ 350.............................................................................................................43 Mobilgard™ 12 Series.................................................................................................82 Mobilgard™ 300..........................................................................................................81 Mobilgard™ 410 NC (No Chlorine)..............................................................................82 Mobilgard™ 525..........................................................................................................81 Mobilgard™ 560 VS.....................................................................................................81 Mobilgard™ 570..........................................................................................................81 Mobilgard™ ADL Series..............................................................................................82 Mobilgard™ M30, M40 and M50.................................................................................82 Mobilgear™ 600 XP Series.........................................................................................34




Mobilgear™ MS Series...............................................................................................44 Mobilgear SHC™ XMP Series....................................................................................35 Mobilgrease™ 28........................................................................................................85 Mobilgrease™ 33........................................................................................................85 Mobilgrease™ FM 101.................................................................................................94

APPENDICIES

Mobilgrease XHP™ 220 Series...................................................................................97 Mobilgrease XHP™ 460 Series...................................................................................97 Mobilgrease XHP™ Mine.......................................................................................... 100 Mobilgrease™ XTC.....................................................................................................92 Mobilith SHC™ PM.................................................................................................... 101 Mobilith SHC™ Series.................................................................................................97 Mobilmet™ 420 Series................................................................................................42 Mobilmet™ 760 Series................................................................................................42 Mobiltac™ 375 NC......................................................................................................36 Mobiltemp SHC™ 32...................................................................................................96 Mobiltemp™ Series.....................................................................................................96 Mobiltherm™ and Thermoil™......................................................................................37 Mobiltrans™ AST (All-Season Transmission)..............................................................67 Mobiltrans™ AST 30 and Mobiltrans™ AST Extra 20.................................................67 Mobiltrans™ HD 10W, 30 and 50................................................................................67 Mobilube™ HD Extra MG 75W and 80W-140.............................................................66 Mobilube™ HD LS 80W-90.........................................................................................66 Mobilube™ HD Plus MG 75W, 80W-90 and 85W-140................................................66 Mobilube™ XFD 50 and 60.........................................................................................66 Mobilux™ EP 111.........................................................................................................92


Mobilux™ EP Series...................................................................................................98 Nebula™ EP Special...................................................................................................94 Slurry Oil 62.................................................................................................................46 SPARTAN™ EP-C.......................................................................................................34 Thredkote™ 706........................................................................................................ 103 Voltesso™...................................................................................................................51 Wire Rope Dressing................................................................................................... 104 Z-50 Pipe Dope......................................................................................................... 104



116

Viscosity Classification Equivalents

ISO VISCOSITY CLASSIFICATION SYSTEM Many petroleum products are graded according to the ISO Viscosity Classification System, approved by the International Standards Organization (ISO). Each ISO viscosity grade number corresponds to the mid-point of a viscosity range expressed in centistokes (cSt) at 40°C. For example, a lubricant with an ISO grade of 32 has a viscosity within the range of 28.8–35.2, the midpoint of which is 32. Rule-of-Thumb: The comparable ISO grade of a given product whose viscosity in SUS at 100°F is known can be determined by using the following conversion formula: SUS @ 100°F ÷ 5 =cSt ˜ @ 40°C



TM


Imperial Oil Downstream and Chemical 237 Fourth Avenue SW, Calgary, Alberta T2P 3M9


For more information: 1- 888-968-3776


mobil.ca mobildelvac.ca mobilindustrial.com All trademarks used herein are trademarks or ed trademarks of Exxon Mobil Corporation or one of its subsidiaries.


TM

TM

TM

TM

TM

TM

TM

TM

TM

TM

Tai Lieu Moi 3z3731

Overview 5o1f4z

More details 6z3438

Related Documents c2h70

Tai Lieu Moi 3z3731

Spc - Tai Lieu In 144t5w

Tai Lieu Khuon Mau 3t6l6r

Tai Lieu Hypermesh Tieng Viet_2016 g4q5b

Tai Lieu Ky Nang Mem 4q6p2g

[123doc.vn] Tai Lieu Gsm Bts 3900 Doc 23433u

More Documents from "nghia" 3v4z24

Domestic-water-sizing-v2.xls 62l1j

Tai Lieu Moi 3z3731

Softener.xls 2t53

Water Demand.xls 134e1r

Head Loss.xls 2n6q1k

Cac Cong Ty Trong Kcn Tai Long An g643g