Student Counseling Management System 5w6se
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 2z6p3t
Overview 5o1f4z
& View Student Counseling Management System as PDF for free.
More details 6z3438
- Words: 4,374
- Pages: 73
S.NO
CONTENTS
1.
ABSTRACT
2.
INTRODUCTION
3.
SYSTEM CONFIGURATION 3.1 HARDWARE CONFIGUARTION 3.2 SOFTWARE CONFIGURATION 3.3 SOFTWARE PROFILE 3.3.1. VISUAL BASIC 3.3.2. MSACCESS
4.
5.
6.
SYSTEM ANALYSIS 4.1 EXISTING SYSTEM 4.2 PROPOSED SYSTEM 4.3 CONSTRAINS SYSTEM DESIGN 5.1 DATAFLOW DIAGRAM 5.2 TABLE DESIGN 5.3 FORM DESIGN DEVELOPMENT 6.1 SAMPLE CODING
PAGE NO 1 2
3
13
15
21 63
7.
TESTING 7.1 UNIT TESTING 7.2 INTEGRATION TESTING
8. FUTURE ENHANCEMENT 9. CONCLUSION 10. BIBLIOGRAPHY
69 70
INTRODUCTION
INTRODUCTION The STUDENT COUNSELING MANAGEMENT SYSTEM project which help student for their higher studies. Student can straight come and apply for their higher studies. Eligibility for applying candidates is they must in their +2 levels and they belong to either first group or second group. After submit their forms counseling department staffs will feed their details and check the cutt off mark. Finally they send post to the students who are eligible. The university lists some colleges from that the student can select any one college and course which he/she wants. Form details there are fifteen forms , main form, student details, mark details, college and course form and all the colleges form .For security profess their will be a form only authorized person can log on.
STUDENT COUNSELING MANAGEMENT SYSTEM ABSTRACT The main objective of this project is to maintain information regarding STUDENT COUNSELING MANAGEMENT SYSTEM. In this project I am used front end as visual basic 6.0 Back end as MSACCESS. In this project we were going enter the student information details and marks which they get in the higher secondary level. Regarding that mark we going to check the cut off mark. Cut off mark can be check only the major subject not all which they studied. According to the cut off mark, the university lists some colleges from that the student can select any one college and course which he/she wants.
SYSTEM CONFIGURATION HARDWARE CONFIGUARTION Processor
- Pentium 4
Memory
-1GB RAM
Monitor
-15”monitor
Floppy Disk
-1.44MB
Keyboard
-104keys
Mouse
- Logitech
Hard disk capacity -10GB Operating system
-windows XP
SOFTWARE SPECIFICATION FRONT END
: VISUAL BASIC 6.0
BACK END
: MS ACCESS
MS-ACCESS Microsoft access is a database program, which is used to create collection of organized data items. These items are called records. Each record has the same form and consists of one or more pieces, each of which stores a particular kind of data. The record pieces are referred to as fields. Visual basic and Microsoft access have a deep affinity for each other as Microsoft is the developer of both, this is not necessarily surprising. The two programs share the code to access database files. The access database is a relational database by VB6.0 and Microsoft access. A relational database that structures the data by breaking them into logical objects that have relationship between them. This reduces the amount of redundant data and makes comprehension easies. They also provide mechanism to correctly maintain the relationships between objects. This function is called referential integrity. So this provides the case to do programs and make the project very friendly. Also generating reports using data report will helps us to create report with various conditions using selection formula method in data reports
DATABASE APPLICATION ADO control is used in the following applications 1. record can be displayed using ADO control 2. adding and editing of records can be removed
3. using program records can be removed. 4. code can be used to navigate in a record set. 5. using the find button we can find the records easily.
ACTIVEX DATA OBJECT(ADO) The ADO data control allows you to quickly create a connection to a database using Microsoft ActiveX data objects(ADO). At design time, you can create a connection by setting the connection string property to a valid connection string, and then set the RecordSource property to a statement appropriate to the database manager. You can also set the connection string property to the name of a file that defines a connection; the file is generated by a data link dialog box, which appear when you click connectionstring on the properties window and then click either builds or select. We can connect the ADO data control to a data-bound control such as the datagrid, datacombo, or datalist control by setting the property to the ADO data control. At run can dynamically set the connectionstring and RecordSource properties to change the database. Alternatively you can set the Recordset property directly to a previously opened recordset.
SYSTEM ANALYSIS
SYSTEM ANALYSIS EXISTING SYSTEM The existing system is the manual system. The manual system is error prone. It is time consuming. It is very difficult for a student to know the correct college and courses to by his/her cut-off mark. This system involves a lot of manual entries with the applications to perform the desired task.
LIMITATIONS: Data maintenance adopted by the present system is not accurate. Inaccurate result in case of duplicating, delay and inconsistency in reporting. Generating consolidated reports is more difficult in manual system and it may not be consistent. The transactions are very time consuming. There is no facility for the s to know whether the data is entered is valid or not. This disadvantage is the major cause of errors in transaction. There is inconsistency in maintaining data’s. No global view ability of data’s. It is not friendly.
PROPOSED SYSTEM The proposed system is designed to eliminate the drawbacks of the existing system. It is designed by keeping in mind all the drawbacks of the present system in order to provide a permanent solution to the problems. The primary aim of the new system is to speedup transactions.
The advantages of this system are: friendliness is the keyword for all the new software in the market. The proposed system incorporates this concept into itself to guide the . At every stage of data entry necessary comments and validation messages are provided to the . The proposed system is also expected to reduce the amount of paper work involved. The hard copies of only necessary documents need to be taken the rest can be avoided. Competitive environment is developed with the publications of other of same level. Good communication is being held via mail options.
DESIGN
SYSTEM DESIGN TABLE DESIGN
TABLE DESIGN OF : STUDENT DETAIL + DATA FIELD
DATA TYPE
DESCRIPTION
ROLL NAME FATHER AGE GENDER EMAIL ADDRESS PINCODE
NUMBER(5) VARCHAR2(15) VARCHAR2(15) NUMBER(3) VARCHAR2(6) NUMBER(10) VARCHAR2(30) VARCHAR2(50) NUMBER(6)
ROLL NO NAME FATHER NAME AGE GENDER NO EMAIL ADDRESS PINCODE
TABLE DESIGN OF:STUDENT’S MARK DETAIL DATA FIELD
DATA TYPE
DESCRIPTION
ROLL NAME GRO YOJ LAN ENG MATH PHY CHE BIO COM TOT
NUMBER(5) VARCHAR2(15) VARCHAR2(10) NUMBER(4) NUMBER(3) NUMBER(3) NUMBER(3) NUMBER(3) NUMBER(3) NUMBER(3) NUMBER(3) NUMBER(5,2)
ROLL NO NAME GROUP YEAR OF LANGUAGE ENGLISH MATHS PHYSICS CHEMISTRY BIOLOGY COMPUTERSCIENCE
TOTAL
TABLE DESIGN OF:STUDENT’S COURSE & COLEGE DETAIL + DATA FIELD
DATA TYPE
DESCRIPTION
NAME ROLL TOTAL COLLEGE COURSE FEES
VARCHAR2(15) NUMBER(5) NUMBER(5,2) VARCHAR2(60) VARCHAR2(20) NUMBER(7)
NAME ROLL NO TOTAL COLLEGE COURSE FEES
TABLE DESIGN OF: PRABU COLLEGE DATA FIELD
DATA TYPE
SINO SEAT
NUMBER(3) VARCHAR2(10)
DESCRIPTION SERIAL NUMBER AVAILABLE SEATS
TABLE DESIGN OF: ASHOK COLLEGE DATA FIELD
DATA TYPE
SINO SEAT
NUMBER(3) VARCHAR2(10)
DESCRIPTION SERIAL NUMBER AVAILABLE SEATS
TABLE DESIGN OF: NOEL COLLEGE DATA FIELD
DATA TYPE
SINO SEAT
NUMBER(3) VARCHAR2(10)
TABLE DESIGN OF: : NIRMAL COLLEGE
DESCRIPTION SERIAL NUMBER AVAILABLE SEATS
DATA FIELD
DATA TYPE
SINO SEAT
NUMBER(3) VARCHAR2(10)
DESCRIPTION SERIAL NUMBER AVAILABLE SEATS
TABLE DESIGN OF: CHANDRU COLLEGE DATA FIELD
DATA TYPE
SINO SEAT
NUMBER(3) VARCHAR2(10)
DESCRIPTION SERIAL NUMBER AVAILABLE SEATS
DATA FLOW DIAGRAM
A Dataflow diagram shows the flow of data through the system. They are also called as “Bubble Charts”. It doesn’t specify how we convert data from one form to another. Once the context level diagrams is drawn, we can design breaking it down into its detailed parts. Here the nodes specify the processing activities and arcs specify the data items transmitted between the nodes.
ER DIGRAM FOR STUDENT’S DETAILS
E-MAIL
NAME
ROLL
AGE
PIN CODE
STUDENT’ S DETAILS
ADDRESS
ER DIGRAM FOR MARK DETAILS DETAILS
GENDER
FATHER NAME
ROLL
E-MAIL
NAME
GROUP 1ST OR 2ND
MATHS PHYSICS
ENGLISH
CHEMISTRY
COMPUTE R SCIENCE
MARK DETAILS
YOJ
LANGUAGE
BIOLOGY TOTAL
ER DIGRAM FOR COLLEGE AND COURSE DETAILS
ROLL
NAME
COURES
COLLEGE AND COURES DETAIL
FEES
COLLEGES
SCREEN SHORT
INPUT FORM:
INPUT FORM : STUDENTS DETAILS
INPUT FORM: MARK DETAILS
COLLEGE AND COURSES
INPUT FORM : SEAT FORM
INPUT FORM: ASHOK ENG COLLEGE
INPUT FORM: PRABHU ENG COLLEGE
INPUT FORM: NOEL ENG COLLEGE
INPUT FORM:NIRMAL ENG COLLEGE
INPUT FORM: CHANDRU ENG COLLEGE
SAMPLE CODINGS
CODING: FORM Private Sub cmdCancel_Click() Unload Me End Sub Private Sub cmdOK_Click() If Text1.Text = "renu" And Text2.Text = "stud" Then Unload Me Form12.Show Else MsgBox "INVALID WARD TRY AGAIN" Text1.Text = "" Text2.Text = "" End If End Sub
CODING: STUDENT’S DETAILS Private Sub cmdadd_Click() MsgBox "ADD NEW RECORD" Adodc1.Recordset.AddNew End Sub Private Sub cmddelete_Click() MsgBox "DO YOU WANT DELETE CURRENT RECORD= vb information student delibiraying system" Adodc1.Recordset.Delete End Sub
Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast End Sub Private Sub cmdnext_Click() Adodc1.Recordset.MoveNext End Sub Private Sub cmdprevious_Click() Adodc1.Recordset.MoveLast End Sub Private Sub cmdsave_Click() Adodc1.Recordset.Save MsgBox "THE CURRENT RECORD WAS SAVED vb information= student delibirating system" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update End Sub
Private Sub Command1_Click() Form3.Show End Sub Private Sub Command10_Click() Form4.Show End Sub Private Sub Command11_Click() MsgBox "ARE YOU SURE TO EXIT" End End Sub Private Sub Image3_Click() Form4.Show End Sub Private Sub Option1_Click() If Option1.Value = True Then TXTG = "FEMALE" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then TXTG = "MALE" End If
End Sub Private Sub Picture3_Click() Form3.Show End Sub
CODING: MARK DETAILS Private Sub Command1_Click() If TXTGRO = "1ST GROUP" Then TXTTOT = (Val(TXTMATH) + Val(TXTPHY) + Val(TXTCHE) + Val(TXTBIO)) / 4 ElseIf TXTGRO = "2ND GROUP" Then TXTTOT
=
(Val(TXTMATH)
Val(TXTCOM)) / 4 End If End Sub Private Sub Command10_Click() Form2.Show End Sub Private Sub Command11_Click() Unload Me End Sub Private Sub cmdadd_Click()
+
Val(TXTPHY)
+
Val(TXTCHE)
+
MsgBox "ADD NEW RECORD" Adodc1.Recordset.AddNew End Sub Private Sub cmddelete_Click() MsgBox "DO YOU WANT DELETE CURRENT RECORD= vb information student counselling system" Adodc1.Recordset.Delete End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast End Sub Private Sub cmdnext_Click() Adodc1.Recordset.MoveNext End Sub Private Sub cmdprevious_Click() Adodc1.Recordset.MovePrevious End Sub Private Sub cmdsave_Click()
Adodc1.Recordset.Save MsgBox "THE CURRENT RECORD WAS SAVED vb information= student counselling system" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update End Sub Private Sub Image3_Click() Form4.Show End Sub Private Sub Opt1_Click() If Opt1.Value = True Then TXTGRO = "1ST GROUP" TXTCOM.Visible = False TXTBIO.Visible = True End If End Sub
Private Sub Opt2_Click() If Opt2.Value = True Then TXTGRO = "2ND GROUP" TXTBIO.Visible = False TXTCOM.Visible = True
End If End Sub Private Sub OptE_Click() If OptE.Value = True Then Label4 = "HINDI" End If End Sub Private Sub OptT_Click() If OptT.Value = True Then Label4 = "TAMIL" End If End Sub Private Sub Picture3_Click() Form5.Show End Sub
CODING: COLLEGE AND COURSE FORM Private Sub Command1_Click()
Adodc1.Recordset.MoveNext End Sub Private Sub Command10_Click() Form3.Show End Sub Private Sub Command2_Click() If txtc = "ASHOK" And TXTCOURSE = "B.TECH.IT" Then TXTFEE = "60000" ElseIf txtc = " ASHOK " And TXTCOURSE = "BIO.TECH" Then TXTFEE = "80587" ElseIf txtc = " ASHOK " And TXTCOURSE = "BE.ELECTRONIC" Then TXTFEE = "75862" ElseIf txtc = " ASHOK " And TXTCOURSE = "MSC.IT" Then TXTFEE = "150000" ElseIf txtc = "PRABHU" And TXTCOURSE = "B.TECH.IT" Then TXTFEE = "65120" ElseIf txtc = " PRABHU " And TXTCOURSE = "BIO.TECH" Then TXTFEE = "78587" ElseIf txtc = " PRABHU " And TXTCOURSE = "BE.ELECTRONIC" Then TXTFEE = "70586" ElseIf txtc = " PRABHU " And TXTCOURSE = "MSC.IT" Then TXTFEE = "140000" ElseIf txtc = "NOEL" And TXTCOURSE = "B.TECH.IT" Then TXTFEE = "85120" ElseIf txtc = " NOEL " And TXTCOURSE = "BIO.TECH" Then
TXTFEE = "88587" ElseIf txtc = " NOEL " And TXTCOURSE = "BE.ELECTRONIC" Then TXTFEE = "70586" ElseIf txtc = " NOEL " And TXTCOURSE = "MSC.IT" Then TXTFEE = "160000" ElseIf txtc = "NIRMAL" And TXTCOURSE = "B.TECH.IT" Then TXTFEE = "63120" ElseIf txtc = " NIRMAL " And TXTCOURSE = "BIO.TECH" Then TXTFEE = "74587" ElseIf txtc = " NIRMAL " And TXTCOURSE = "BE.ELECTRONIC" Then TXTFEE = "69586" ElseIf txtc = " NIRMAL " And TXTCOURSE = "MSC.IT" Then TXTFEE = "135000" ElseIf txtc = "CHANDRU" And TXTCOURSE = "B.TECH.IT" Then TXTFEE = "61120" ElseIf txtc = " CHANDRU " And TXTCOURSE = "BIO.TECH" Then TXTFEE = "71587" ElseIf txtc = " CHANDRU " And TXTCOURSE = "BE.ELECTRONIC" Then TXTFEE = "65586" ElseIf txtc = " CHANDRU " And TXTCOURSE = "MSC.IT" Then TXTFEE = "130000" End If End Sub Private Sub Image3_Click() Form4.Show End Sub
Private Sub List1_Click() txtc.Text = List1.ItemData(List1.ListIndex) txtc.Text = List1.List(List1.ListIndex) End Sub Private Sub Option1_Click() If Option1.Value = True Then TXTCOURSE = "B.TECH.IT" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then TXTCOURSE = "BIO.TECH" End If End Sub Private Sub Option3_Click() If Option3.Value = True Then TXTCOURSE = "BE.ELECTRONIC" End If End Sub Private Sub Option4_Click() If Option4.Value = True Then TXTCOURSE = "MSC.IT" End If
End Sub Private Sub Picture3_Click() Form6.Show EndSub Private Sub cmdadd_Click() MsgBox "ADD NEW RECORD" Adodc1.Recordset.AddNew End Sub Private Sub cmddelete_Click() MsgBox "DO YOU WANT DELETE CURRENT RECORD= vb information student counselling system" Adodc1.Recordset.Delete End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast End Sub Private Sub cmdnext_Click() Adodc1.Recordset.MoveNext End Sub
Private Sub cmdprevious_Click() Adodc1.Recordset.MovePrevious End Sub Private Sub cmdsave_Click() Adodc1.Recordset.Save MsgBox "THE CURRENT RECORD WAS SAVED vb information= student counselling system" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update End Sub
CODING: COLLEGE SEATS FORM Private Sub Command1_Click() Form7.Show End Sub Private Sub Command2_Click() Form8.Show End Sub Private Sub Command3_Click() Form9.Show End Sub Private Sub Command4_Click() Form10.Show End Sub
Private Sub Command5_Click() Form11.Show End Sub Private Sub Image3_Click() Form4.Show End Sub Private Sub Picture3_Click() Form7.Show End Sub CODING: ASHOK ENG COLLEGE Private Sub Command1_Click() If TXTCOURSE = "B.TECH.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BIO.TECH" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BE.ELECTRONIC" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "MSC.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" End If End Sub Private Sub Command3_Click() Form6.Show End Sub Private Sub Option1_Click() If Option1.Value = True Then TXTCOURSE = "B.TECH.IT" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then
TXTCOURSE = "BIO.TECH" End If End Sub Private Sub Option3_Click() If Option3.Value = True Then TXTCOURSE = "BE.ELECTRONIC" End If End Sub Private Sub Option4_Click() If Option4.Value = True Then TXTCOURSE = "MSC.IT" End If End Sub Private Sub cmddelete_Click() Adodc1.Recordset.Delete MsgBox ("THE CURRENT RECORD IS DELETED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Adodc1.Recordset.MoveNext End Sub Private Sub cmdexit_Click() Unload Me Form3.Show End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst MsgBox ("THIS IS FIRST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast MsgBox ("THIS IS LAST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub
Private Sub cmdnext_Click() If Adodc1.Recordset.EOF Then MsgBox ("NO RECORDS FOUND"), vbInformation, "STUDENT COUNSELLING MAINATANCE SYSTEM" Else Adodc1.Recordset.MoveNext MsgBox ("U ARE IN NEXT RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub cmdprevious_Click() If Adodc1.Recordset.BOF Then MsgBox "NO RECORDS FOUND", vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Else Adodc1.Recordset.MovePrevious MsgBox ("U ARE IN PREVIOUS REORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub Command2_Click() Adodc1.Recordset.Save MsgBox ("SUCCESSFULLY APPLIED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Text1.Text = "" Text2.Text = "" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update MsgBox ("RECORD UPDATED SUCCESSFULLY"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub
CODING: PRABHU ENG COLLEGE
Private Sub Command1_Click() If TXTCOURSE = "B.TECH.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BIO.TECH" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BE.ELECTRONIC" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "MSC.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" End If End Sub Private Sub Command3_Click() Form6.Show End Sub Private Sub Option1_Click() If Option1.Value = True Then TXTCOURSE = "B.TECH.IT" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then TXTCOURSE = "BIO.TECH" End If End Sub Private Sub Option3_Click() If Option3.Value = True Then TXTCOURSE = "BE.ELECTRONIC" End If End Sub Private Sub Option4_Click() If Option4.Value = True Then TXTCOURSE = "MSC.IT" End If End Sub
Private Sub cmddelete_Click() Adodc1.Recordset.Delete MsgBox ("THE CURRENT RECORD IS DELETED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Adodc1.Recordset.MoveNext End Sub Private Sub cmdexit_Click() Unload Me Form3.Show End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst MsgBox ("THIS IS FIRST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast MsgBox ("THIS IS LAST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdnext_Click() If Adodc1.Recordset.EOF Then MsgBox ("NO RECORDS FOUND"), vbInformation, "STUDENT COUNSELLING MAINATANCE SYSTEM" Else Adodc1.Recordset.MoveNext MsgBox ("U ARE IN NEXT RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub cmdprevious_Click() If Adodc1.Recordset.BOF Then MsgBox "NO RECORDS FOUND", vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM"
Else Adodc1.Recordset.MovePrevious MsgBox ("U ARE IN PREVIOUS REORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub Command2_Click() Adodc1.Recordset.Save MsgBox ("SUCCESSFULLY APPLIED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Text1.Text = "" Text2.Text = "" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update MsgBox ("RECORD UPDATED SUCCESSFULLY"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub
CODING: NOEL ENG COLLEGE Private Sub Command1_Click() If TXTCOURSE = "B.TECH.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BIO.TECH" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BE.ELECTRONIC" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "MSC.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" End If End Sub Private Sub Command3_Click() Form6.Show End Sub
Private Sub Option1_Click() If Option1.Value = True Then TXTCOURSE = "B.TECH.IT" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then TXTCOURSE = "BIO.TECH" End If End Sub Private Sub Option3_Click() If Option3.Value = True Then TXTCOURSE = "BE.ELECTRONIC" End If End Sub Private Sub Option4_Click() If Option4.Value = True Then TXTCOURSE = "MSC.IT" End If End Sub Private Sub cmddelete_Click() Adodc1.Recordset.Delete MsgBox ("THE CURRENT RECORD IS DELETED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Adodc1.Recordset.MoveNext End Sub Private Sub cmdexit_Click() Unload Me Form3.Show End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst MsgBox ("THIS IS FIRST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM"
End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast MsgBox ("THIS IS LAST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdnext_Click() If Adodc1.Recordset.EOF Then MsgBox ("NO RECORDS FOUND"), vbInformation, "STUDENT COUNSELLING MAINATANCE SYSTEM" Else Adodc1.Recordset.MoveNext MsgBox ("U ARE IN NEXT RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub cmdprevious_Click() If Adodc1.Recordset.BOF Then MsgBox "NO RECORDS FOUND", vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Else Adodc1.Recordset.MovePrevious MsgBox ("U ARE IN PREVIOUS REORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub Command2_Click() Adodc1.Recordset.Save MsgBox ("SUCCESSFULLY APPLIED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Text1.Text = "" Text2.Text = "" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update
MsgBox ("RECORD UPDATED SUCCESSFULLY"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub
CODING: NIRMAL ENG COLLEGE Private Sub Command1_Click() If TXTCOURSE = "B.TECH.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BIO.TECH" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BE.ELECTRONIC" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "MSC.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" End If End Sub Private Sub Command3_Click() Form6.Show End Sub Private Sub Option1_Click() If Option1.Value = True Then TXTCOURSE = "B.TECH.IT" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then TXTCOURSE = "BIO.TECH" End If End Sub Private Sub Option3_Click() If Option3.Value = True Then TXTCOURSE = "BE.ELECTRONIC" End If End Sub
Private Sub Option4_Click() If Option4.Value = True Then TXTCOURSE = "MSC.IT" End If End Sub Private Sub cmddelete_Click() Adodc1.Recordset.Delete MsgBox ("THE CURRENT RECORD IS DELETED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Adodc1.Recordset.MoveNext End Sub Private Sub cmdexit_Click() Unload Me Form3.Show End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst MsgBox ("THIS IS FIRST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast MsgBox ("THIS IS LAST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdnext_Click() If Adodc1.Recordset.EOF Then MsgBox ("NO RECORDS FOUND"), vbInformation, "STUDENT COUNSELLING MAINATANCE SYSTEM" Else Adodc1.Recordset.MoveNext MsgBox ("U ARE IN NEXT RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If
End Sub Private Sub cmdprevious_Click() If Adodc1.Recordset.BOF Then MsgBox "NO RECORDS FOUND", vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Else Adodc1.Recordset.MovePrevious MsgBox ("U ARE IN PREVIOUS REORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub Command2_Click() Adodc1.Recordset.Save MsgBox ("SUCCESSFULLY APPLIED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Text1.Text = "" Text2.Text = "" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update MsgBox ("RECORD UPDATED SUCCESSFULLY"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub
CODING: CHANDRU ENG COLLEGE Private Sub Command1_Click() If TXTCOURSE = "B.TECH.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BIO.TECH" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BE.ELECTRONIC" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "MSC.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" End If End Sub
Private Sub Command3_Click() Form6.Show End Sub Private Sub Option1_Click() If Option1.Value = True Then TXTCOURSE = "B.TECH.IT" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then TXTCOURSE = "BIO.TECH" End If End Sub Private Sub Option3_Click() If Option3.Value = True Then TXTCOURSE = "BE.ELECTRONIC" End If End Sub Private Sub Option4_Click() If Option4.Value = True Then TXTCOURSE = "MSC.IT" End If End Sub Private Sub cmddelete_Click() Adodc1.Recordset.Delete MsgBox ("THE CURRENT RECORD IS DELETED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Adodc1.Recordset.MoveNext End Sub Private Sub cmdexit_Click() Unload Me Form3.Show
End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst MsgBox ("THIS IS FIRST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast MsgBox ("THIS IS LAST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdnext_Click() If Adodc1.Recordset.EOF Then MsgBox ("NO RECORDS FOUND"), vbInformation, "STUDENT COUNSELLING MAINATANCE SYSTEM" Else Adodc1.Recordset.MoveNext MsgBox ("U ARE IN NEXT RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub cmdprevious_Click() If Adodc1.Recordset.BOF Then MsgBox "NO RECORDS FOUND", vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Else Adodc1.Recordset.MovePrevious MsgBox ("U ARE IN PREVIOUS REORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub Command2_Click() Adodc1.Recordset.Save MsgBox ("SUCCESSFULLY APPLIED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Text1.Text = ""
Text2.Text = "" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update MsgBox ("RECORD UPDATED SUCCESSFULLY"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub
TESTING
In a software development project, errors can be injected at any stage during the development. Testing performs a very critical role for quality and for ensuring the reliability of software. During testing, the program to be tested is executed with set of test cases, and the output of the program for the test cases is evaluated to determine if the program is performing as it is expected to. Due to its approach, dynamic testing can only ascertain the presence of error in the program; the exact nature of the error is not usually decided by testing. Testing forms The first step in determining the errors in the program. Clearly the success of testing in revealing errors in programs depends critically on the test cases. Testing is usually relied upon to detect the faults that occur during any phase of the software development cycle, in addition to the faults that introduced during the coding phase itself. For this, different levels of testing are used which perform different tasks and aim to test different aspects of the system. The basic levels of testing are unit testing, integration testing, system and acceptance testing.
UNIT TESTING:
Unit testing is a dynamic method for verification, where the programs is actually compiled and executed .It is one of the most widely used method, and the coding phase is sometimes called “coding and unit testing phase”, as in other forms of testing, unit testing involves executing the code with
some test cases and then
evaluating the results. The goal of unit testing is to test modules or ”units” and not the entire software system. The programmer himself most often does unit testing, the programmers, after finishing the coding of a module, test it with some data. The tested module is then delivered for system integration and further testing there are 4 categories of tests that a programmer will typically perform on a program unit
INTEGRATIONG TESTING: After the unit testing the modules is gradually integrated into subsystem, which are then integrated them to eventually form the entire system. During integration of modules Integration testing is performed .The goal of this testing is to detect design errors, while focusing on testing the interconnection between modules. After the system is put together, system testing is performed. here the system is tested against the system requirements to see if all the requirements are met and the system performs as specified by requirements. The entire software is tested and the goal is to see if the software meets the requirements
OUTPUT FORM: FORM
OUTPUT FORM: STUDENT DETAILS
OUTPUT FORM: MARKS DETAILS
OUTPUT FORM: COLLEGE AND COURSES
OUTPUT FORM: SEAT FORM
OUTPUT FORM: ASHOK ENG COLLEGE
OUTPUT FORM: PRABHU ENG COLLEGE
OUTPUT FORM:NOEL ENG COLLEGE
OUTPUT FORM:NIRMAL ENG COLLEGE
OUTPUT FORM:CHANDRU ENG COLLEGE
REPORT FORM:STUDENT DETAILS
REPORTFORM: 1ST GROUP MARK DETAILS
REPORT FORM: 2ND GROUP MARK DETAILS
REPORT FORM: COLLEGE AND COURSES
CONCLUSION
This project incorporates all requirements of a Server. This system has been developed as versatile and - friendly as possible, keeping in mind the advanced features in this technology. This project is friendly to and system interfaces. In this project it as vb 6.0 front end & MSACCESS as a back end. With help of ms access ever Worry data loss and so. It is very secure and safety. Without an authorized person this project can’t be run or update. The STUDENT COUNSELING MANAGEMENT SYSTEM project which help student for their higher
Studies and to select an good college and also a good course.
BIBILIOGRAPHY REFERENCES BOOKS: •
VISUAL BASIC 6.0 AUTHOR: GARY CORNELL
•
VISUAL BASIC FROM THE GROUND UP AUTHOR: CORNELL
•
DATABASE MANAGEMENT SYSTEM AUTHOR: G.V.POST
CONTENTS
1.
ABSTRACT
2.
INTRODUCTION
3.
SYSTEM CONFIGURATION 3.1 HARDWARE CONFIGUARTION 3.2 SOFTWARE CONFIGURATION 3.3 SOFTWARE PROFILE 3.3.1. VISUAL BASIC 3.3.2. MSACCESS
4.
5.
6.
SYSTEM ANALYSIS 4.1 EXISTING SYSTEM 4.2 PROPOSED SYSTEM 4.3 CONSTRAINS SYSTEM DESIGN 5.1 DATAFLOW DIAGRAM 5.2 TABLE DESIGN 5.3 FORM DESIGN DEVELOPMENT 6.1 SAMPLE CODING
PAGE NO 1 2
3
13
15
21 63
7.
TESTING 7.1 UNIT TESTING 7.2 INTEGRATION TESTING
8. FUTURE ENHANCEMENT 9. CONCLUSION 10. BIBLIOGRAPHY
69 70
INTRODUCTION
INTRODUCTION The STUDENT COUNSELING MANAGEMENT SYSTEM project which help student for their higher studies. Student can straight come and apply for their higher studies. Eligibility for applying candidates is they must in their +2 levels and they belong to either first group or second group. After submit their forms counseling department staffs will feed their details and check the cutt off mark. Finally they send post to the students who are eligible. The university lists some colleges from that the student can select any one college and course which he/she wants. Form details there are fifteen forms , main form, student details, mark details, college and course form and all the colleges form .For security profess their will be a form only authorized person can log on.
STUDENT COUNSELING MANAGEMENT SYSTEM ABSTRACT The main objective of this project is to maintain information regarding STUDENT COUNSELING MANAGEMENT SYSTEM. In this project I am used front end as visual basic 6.0 Back end as MSACCESS. In this project we were going enter the student information details and marks which they get in the higher secondary level. Regarding that mark we going to check the cut off mark. Cut off mark can be check only the major subject not all which they studied. According to the cut off mark, the university lists some colleges from that the student can select any one college and course which he/she wants.
SYSTEM CONFIGURATION HARDWARE CONFIGUARTION Processor
- Pentium 4
Memory
-1GB RAM
Monitor
-15”monitor
Floppy Disk
-1.44MB
Keyboard
-104keys
Mouse
- Logitech
Hard disk capacity -10GB Operating system
-windows XP
SOFTWARE SPECIFICATION FRONT END
: VISUAL BASIC 6.0
BACK END
: MS ACCESS
MS-ACCESS Microsoft access is a database program, which is used to create collection of organized data items. These items are called records. Each record has the same form and consists of one or more pieces, each of which stores a particular kind of data. The record pieces are referred to as fields. Visual basic and Microsoft access have a deep affinity for each other as Microsoft is the developer of both, this is not necessarily surprising. The two programs share the code to access database files. The access database is a relational database by VB6.0 and Microsoft access. A relational database that structures the data by breaking them into logical objects that have relationship between them. This reduces the amount of redundant data and makes comprehension easies. They also provide mechanism to correctly maintain the relationships between objects. This function is called referential integrity. So this provides the case to do programs and make the project very friendly. Also generating reports using data report will helps us to create report with various conditions using selection formula method in data reports
DATABASE APPLICATION ADO control is used in the following applications 1. record can be displayed using ADO control 2. adding and editing of records can be removed
3. using program records can be removed. 4. code can be used to navigate in a record set. 5. using the find button we can find the records easily.
ACTIVEX DATA OBJECT(ADO) The ADO data control allows you to quickly create a connection to a database using Microsoft ActiveX data objects(ADO). At design time, you can create a connection by setting the connection string property to a valid connection string, and then set the RecordSource property to a statement appropriate to the database manager. You can also set the connection string property to the name of a file that defines a connection; the file is generated by a data link dialog box, which appear when you click connectionstring on the properties window and then click either builds or select. We can connect the ADO data control to a data-bound control such as the datagrid, datacombo, or datalist control by setting the property to the ADO data control. At run can dynamically set the connectionstring and RecordSource properties to change the database. Alternatively you can set the Recordset property directly to a previously opened recordset.
SYSTEM ANALYSIS
SYSTEM ANALYSIS EXISTING SYSTEM The existing system is the manual system. The manual system is error prone. It is time consuming. It is very difficult for a student to know the correct college and courses to by his/her cut-off mark. This system involves a lot of manual entries with the applications to perform the desired task.
LIMITATIONS: Data maintenance adopted by the present system is not accurate. Inaccurate result in case of duplicating, delay and inconsistency in reporting. Generating consolidated reports is more difficult in manual system and it may not be consistent. The transactions are very time consuming. There is no facility for the s to know whether the data is entered is valid or not. This disadvantage is the major cause of errors in transaction. There is inconsistency in maintaining data’s. No global view ability of data’s. It is not friendly.
PROPOSED SYSTEM The proposed system is designed to eliminate the drawbacks of the existing system. It is designed by keeping in mind all the drawbacks of the present system in order to provide a permanent solution to the problems. The primary aim of the new system is to speedup transactions.
The advantages of this system are: friendliness is the keyword for all the new software in the market. The proposed system incorporates this concept into itself to guide the . At every stage of data entry necessary comments and validation messages are provided to the . The proposed system is also expected to reduce the amount of paper work involved. The hard copies of only necessary documents need to be taken the rest can be avoided. Competitive environment is developed with the publications of other of same level. Good communication is being held via mail options.
DESIGN
SYSTEM DESIGN TABLE DESIGN
TABLE DESIGN OF : STUDENT DETAIL + DATA FIELD
DATA TYPE
DESCRIPTION
ROLL NAME FATHER AGE GENDER EMAIL ADDRESS PINCODE
NUMBER(5) VARCHAR2(15) VARCHAR2(15) NUMBER(3) VARCHAR2(6) NUMBER(10) VARCHAR2(30) VARCHAR2(50) NUMBER(6)
ROLL NO NAME FATHER NAME AGE GENDER NO EMAIL ADDRESS PINCODE
TABLE DESIGN OF:STUDENT’S MARK DETAIL DATA FIELD
DATA TYPE
DESCRIPTION
ROLL NAME GRO YOJ LAN ENG MATH PHY CHE BIO COM TOT
NUMBER(5) VARCHAR2(15) VARCHAR2(10) NUMBER(4) NUMBER(3) NUMBER(3) NUMBER(3) NUMBER(3) NUMBER(3) NUMBER(3) NUMBER(3) NUMBER(5,2)
ROLL NO NAME GROUP YEAR OF LANGUAGE ENGLISH MATHS PHYSICS CHEMISTRY BIOLOGY COMPUTERSCIENCE
TOTAL
TABLE DESIGN OF:STUDENT’S COURSE & COLEGE DETAIL + DATA FIELD
DATA TYPE
DESCRIPTION
NAME ROLL TOTAL COLLEGE COURSE FEES
VARCHAR2(15) NUMBER(5) NUMBER(5,2) VARCHAR2(60) VARCHAR2(20) NUMBER(7)
NAME ROLL NO TOTAL COLLEGE COURSE FEES
TABLE DESIGN OF: PRABU COLLEGE DATA FIELD
DATA TYPE
SINO SEAT
NUMBER(3) VARCHAR2(10)
DESCRIPTION SERIAL NUMBER AVAILABLE SEATS
TABLE DESIGN OF: ASHOK COLLEGE DATA FIELD
DATA TYPE
SINO SEAT
NUMBER(3) VARCHAR2(10)
DESCRIPTION SERIAL NUMBER AVAILABLE SEATS
TABLE DESIGN OF: NOEL COLLEGE DATA FIELD
DATA TYPE
SINO SEAT
NUMBER(3) VARCHAR2(10)
TABLE DESIGN OF: : NIRMAL COLLEGE
DESCRIPTION SERIAL NUMBER AVAILABLE SEATS
DATA FIELD
DATA TYPE
SINO SEAT
NUMBER(3) VARCHAR2(10)
DESCRIPTION SERIAL NUMBER AVAILABLE SEATS
TABLE DESIGN OF: CHANDRU COLLEGE DATA FIELD
DATA TYPE
SINO SEAT
NUMBER(3) VARCHAR2(10)
DESCRIPTION SERIAL NUMBER AVAILABLE SEATS
DATA FLOW DIAGRAM
A Dataflow diagram shows the flow of data through the system. They are also called as “Bubble Charts”. It doesn’t specify how we convert data from one form to another. Once the context level diagrams is drawn, we can design breaking it down into its detailed parts. Here the nodes specify the processing activities and arcs specify the data items transmitted between the nodes.
ER DIGRAM FOR STUDENT’S DETAILS
NAME
ROLL
AGE
PIN CODE
STUDENT’ S DETAILS
ADDRESS
ER DIGRAM FOR MARK DETAILS DETAILS
GENDER
FATHER NAME
ROLL
NAME
GROUP 1ST OR 2ND
MATHS PHYSICS
ENGLISH
CHEMISTRY
COMPUTE R SCIENCE
MARK DETAILS
YOJ
LANGUAGE
BIOLOGY TOTAL
ER DIGRAM FOR COLLEGE AND COURSE DETAILS
ROLL
NAME
COURES
COLLEGE AND COURES DETAIL
FEES
COLLEGES
SCREEN SHORT
INPUT FORM:
INPUT FORM : STUDENTS DETAILS
INPUT FORM: MARK DETAILS
COLLEGE AND COURSES
INPUT FORM : SEAT FORM
INPUT FORM: ASHOK ENG COLLEGE
INPUT FORM: PRABHU ENG COLLEGE
INPUT FORM: NOEL ENG COLLEGE
INPUT FORM:NIRMAL ENG COLLEGE
INPUT FORM: CHANDRU ENG COLLEGE
SAMPLE CODINGS
CODING: FORM Private Sub cmdCancel_Click() Unload Me End Sub Private Sub cmdOK_Click() If Text1.Text = "renu" And Text2.Text = "stud" Then Unload Me Form12.Show Else MsgBox "INVALID WARD TRY AGAIN" Text1.Text = "" Text2.Text = "" End If End Sub
CODING: STUDENT’S DETAILS Private Sub cmdadd_Click() MsgBox "ADD NEW RECORD" Adodc1.Recordset.AddNew End Sub Private Sub cmddelete_Click() MsgBox "DO YOU WANT DELETE CURRENT RECORD= vb information student delibiraying system" Adodc1.Recordset.Delete End Sub
Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast End Sub Private Sub cmdnext_Click() Adodc1.Recordset.MoveNext End Sub Private Sub cmdprevious_Click() Adodc1.Recordset.MoveLast End Sub Private Sub cmdsave_Click() Adodc1.Recordset.Save MsgBox "THE CURRENT RECORD WAS SAVED vb information= student delibirating system" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update End Sub
Private Sub Command1_Click() Form3.Show End Sub Private Sub Command10_Click() Form4.Show End Sub Private Sub Command11_Click() MsgBox "ARE YOU SURE TO EXIT" End End Sub Private Sub Image3_Click() Form4.Show End Sub Private Sub Option1_Click() If Option1.Value = True Then TXTG = "FEMALE" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then TXTG = "MALE" End If
End Sub Private Sub Picture3_Click() Form3.Show End Sub
CODING: MARK DETAILS Private Sub Command1_Click() If TXTGRO = "1ST GROUP" Then TXTTOT = (Val(TXTMATH) + Val(TXTPHY) + Val(TXTCHE) + Val(TXTBIO)) / 4 ElseIf TXTGRO = "2ND GROUP" Then TXTTOT
=
(Val(TXTMATH)
Val(TXTCOM)) / 4 End If End Sub Private Sub Command10_Click() Form2.Show End Sub Private Sub Command11_Click() Unload Me End Sub Private Sub cmdadd_Click()
+
Val(TXTPHY)
+
Val(TXTCHE)
+
MsgBox "ADD NEW RECORD" Adodc1.Recordset.AddNew End Sub Private Sub cmddelete_Click() MsgBox "DO YOU WANT DELETE CURRENT RECORD= vb information student counselling system" Adodc1.Recordset.Delete End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast End Sub Private Sub cmdnext_Click() Adodc1.Recordset.MoveNext End Sub Private Sub cmdprevious_Click() Adodc1.Recordset.MovePrevious End Sub Private Sub cmdsave_Click()
Adodc1.Recordset.Save MsgBox "THE CURRENT RECORD WAS SAVED vb information= student counselling system" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update End Sub Private Sub Image3_Click() Form4.Show End Sub Private Sub Opt1_Click() If Opt1.Value = True Then TXTGRO = "1ST GROUP" TXTCOM.Visible = False TXTBIO.Visible = True End If End Sub
Private Sub Opt2_Click() If Opt2.Value = True Then TXTGRO = "2ND GROUP" TXTBIO.Visible = False TXTCOM.Visible = True
End If End Sub Private Sub OptE_Click() If OptE.Value = True Then Label4 = "HINDI" End If End Sub Private Sub OptT_Click() If OptT.Value = True Then Label4 = "TAMIL" End If End Sub Private Sub Picture3_Click() Form5.Show End Sub
CODING: COLLEGE AND COURSE FORM Private Sub Command1_Click()
Adodc1.Recordset.MoveNext End Sub Private Sub Command10_Click() Form3.Show End Sub Private Sub Command2_Click() If txtc = "ASHOK" And TXTCOURSE = "B.TECH.IT" Then TXTFEE = "60000" ElseIf txtc = " ASHOK " And TXTCOURSE = "BIO.TECH" Then TXTFEE = "80587" ElseIf txtc = " ASHOK " And TXTCOURSE = "BE.ELECTRONIC" Then TXTFEE = "75862" ElseIf txtc = " ASHOK " And TXTCOURSE = "MSC.IT" Then TXTFEE = "150000" ElseIf txtc = "PRABHU" And TXTCOURSE = "B.TECH.IT" Then TXTFEE = "65120" ElseIf txtc = " PRABHU " And TXTCOURSE = "BIO.TECH" Then TXTFEE = "78587" ElseIf txtc = " PRABHU " And TXTCOURSE = "BE.ELECTRONIC" Then TXTFEE = "70586" ElseIf txtc = " PRABHU " And TXTCOURSE = "MSC.IT" Then TXTFEE = "140000" ElseIf txtc = "NOEL" And TXTCOURSE = "B.TECH.IT" Then TXTFEE = "85120" ElseIf txtc = " NOEL " And TXTCOURSE = "BIO.TECH" Then
TXTFEE = "88587" ElseIf txtc = " NOEL " And TXTCOURSE = "BE.ELECTRONIC" Then TXTFEE = "70586" ElseIf txtc = " NOEL " And TXTCOURSE = "MSC.IT" Then TXTFEE = "160000" ElseIf txtc = "NIRMAL" And TXTCOURSE = "B.TECH.IT" Then TXTFEE = "63120" ElseIf txtc = " NIRMAL " And TXTCOURSE = "BIO.TECH" Then TXTFEE = "74587" ElseIf txtc = " NIRMAL " And TXTCOURSE = "BE.ELECTRONIC" Then TXTFEE = "69586" ElseIf txtc = " NIRMAL " And TXTCOURSE = "MSC.IT" Then TXTFEE = "135000" ElseIf txtc = "CHANDRU" And TXTCOURSE = "B.TECH.IT" Then TXTFEE = "61120" ElseIf txtc = " CHANDRU " And TXTCOURSE = "BIO.TECH" Then TXTFEE = "71587" ElseIf txtc = " CHANDRU " And TXTCOURSE = "BE.ELECTRONIC" Then TXTFEE = "65586" ElseIf txtc = " CHANDRU " And TXTCOURSE = "MSC.IT" Then TXTFEE = "130000" End If End Sub Private Sub Image3_Click() Form4.Show End Sub
Private Sub List1_Click() txtc.Text = List1.ItemData(List1.ListIndex) txtc.Text = List1.List(List1.ListIndex) End Sub Private Sub Option1_Click() If Option1.Value = True Then TXTCOURSE = "B.TECH.IT" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then TXTCOURSE = "BIO.TECH" End If End Sub Private Sub Option3_Click() If Option3.Value = True Then TXTCOURSE = "BE.ELECTRONIC" End If End Sub Private Sub Option4_Click() If Option4.Value = True Then TXTCOURSE = "MSC.IT" End If
End Sub Private Sub Picture3_Click() Form6.Show EndSub Private Sub cmdadd_Click() MsgBox "ADD NEW RECORD" Adodc1.Recordset.AddNew End Sub Private Sub cmddelete_Click() MsgBox "DO YOU WANT DELETE CURRENT RECORD= vb information student counselling system" Adodc1.Recordset.Delete End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast End Sub Private Sub cmdnext_Click() Adodc1.Recordset.MoveNext End Sub
Private Sub cmdprevious_Click() Adodc1.Recordset.MovePrevious End Sub Private Sub cmdsave_Click() Adodc1.Recordset.Save MsgBox "THE CURRENT RECORD WAS SAVED vb information= student counselling system" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update End Sub
CODING: COLLEGE SEATS FORM Private Sub Command1_Click() Form7.Show End Sub Private Sub Command2_Click() Form8.Show End Sub Private Sub Command3_Click() Form9.Show End Sub Private Sub Command4_Click() Form10.Show End Sub
Private Sub Command5_Click() Form11.Show End Sub Private Sub Image3_Click() Form4.Show End Sub Private Sub Picture3_Click() Form7.Show End Sub CODING: ASHOK ENG COLLEGE Private Sub Command1_Click() If TXTCOURSE = "B.TECH.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BIO.TECH" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BE.ELECTRONIC" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "MSC.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" End If End Sub Private Sub Command3_Click() Form6.Show End Sub Private Sub Option1_Click() If Option1.Value = True Then TXTCOURSE = "B.TECH.IT" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then
TXTCOURSE = "BIO.TECH" End If End Sub Private Sub Option3_Click() If Option3.Value = True Then TXTCOURSE = "BE.ELECTRONIC" End If End Sub Private Sub Option4_Click() If Option4.Value = True Then TXTCOURSE = "MSC.IT" End If End Sub Private Sub cmddelete_Click() Adodc1.Recordset.Delete MsgBox ("THE CURRENT RECORD IS DELETED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Adodc1.Recordset.MoveNext End Sub Private Sub cmdexit_Click() Unload Me Form3.Show End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst MsgBox ("THIS IS FIRST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast MsgBox ("THIS IS LAST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub
Private Sub cmdnext_Click() If Adodc1.Recordset.EOF Then MsgBox ("NO RECORDS FOUND"), vbInformation, "STUDENT COUNSELLING MAINATANCE SYSTEM" Else Adodc1.Recordset.MoveNext MsgBox ("U ARE IN NEXT RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub cmdprevious_Click() If Adodc1.Recordset.BOF Then MsgBox "NO RECORDS FOUND", vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Else Adodc1.Recordset.MovePrevious MsgBox ("U ARE IN PREVIOUS REORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub Command2_Click() Adodc1.Recordset.Save MsgBox ("SUCCESSFULLY APPLIED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Text1.Text = "" Text2.Text = "" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update MsgBox ("RECORD UPDATED SUCCESSFULLY"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub
CODING: PRABHU ENG COLLEGE
Private Sub Command1_Click() If TXTCOURSE = "B.TECH.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BIO.TECH" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BE.ELECTRONIC" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "MSC.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" End If End Sub Private Sub Command3_Click() Form6.Show End Sub Private Sub Option1_Click() If Option1.Value = True Then TXTCOURSE = "B.TECH.IT" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then TXTCOURSE = "BIO.TECH" End If End Sub Private Sub Option3_Click() If Option3.Value = True Then TXTCOURSE = "BE.ELECTRONIC" End If End Sub Private Sub Option4_Click() If Option4.Value = True Then TXTCOURSE = "MSC.IT" End If End Sub
Private Sub cmddelete_Click() Adodc1.Recordset.Delete MsgBox ("THE CURRENT RECORD IS DELETED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Adodc1.Recordset.MoveNext End Sub Private Sub cmdexit_Click() Unload Me Form3.Show End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst MsgBox ("THIS IS FIRST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast MsgBox ("THIS IS LAST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdnext_Click() If Adodc1.Recordset.EOF Then MsgBox ("NO RECORDS FOUND"), vbInformation, "STUDENT COUNSELLING MAINATANCE SYSTEM" Else Adodc1.Recordset.MoveNext MsgBox ("U ARE IN NEXT RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub cmdprevious_Click() If Adodc1.Recordset.BOF Then MsgBox "NO RECORDS FOUND", vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM"
Else Adodc1.Recordset.MovePrevious MsgBox ("U ARE IN PREVIOUS REORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub Command2_Click() Adodc1.Recordset.Save MsgBox ("SUCCESSFULLY APPLIED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Text1.Text = "" Text2.Text = "" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update MsgBox ("RECORD UPDATED SUCCESSFULLY"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub
CODING: NOEL ENG COLLEGE Private Sub Command1_Click() If TXTCOURSE = "B.TECH.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BIO.TECH" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BE.ELECTRONIC" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "MSC.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" End If End Sub Private Sub Command3_Click() Form6.Show End Sub
Private Sub Option1_Click() If Option1.Value = True Then TXTCOURSE = "B.TECH.IT" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then TXTCOURSE = "BIO.TECH" End If End Sub Private Sub Option3_Click() If Option3.Value = True Then TXTCOURSE = "BE.ELECTRONIC" End If End Sub Private Sub Option4_Click() If Option4.Value = True Then TXTCOURSE = "MSC.IT" End If End Sub Private Sub cmddelete_Click() Adodc1.Recordset.Delete MsgBox ("THE CURRENT RECORD IS DELETED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Adodc1.Recordset.MoveNext End Sub Private Sub cmdexit_Click() Unload Me Form3.Show End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst MsgBox ("THIS IS FIRST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM"
End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast MsgBox ("THIS IS LAST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdnext_Click() If Adodc1.Recordset.EOF Then MsgBox ("NO RECORDS FOUND"), vbInformation, "STUDENT COUNSELLING MAINATANCE SYSTEM" Else Adodc1.Recordset.MoveNext MsgBox ("U ARE IN NEXT RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub cmdprevious_Click() If Adodc1.Recordset.BOF Then MsgBox "NO RECORDS FOUND", vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Else Adodc1.Recordset.MovePrevious MsgBox ("U ARE IN PREVIOUS REORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub Command2_Click() Adodc1.Recordset.Save MsgBox ("SUCCESSFULLY APPLIED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Text1.Text = "" Text2.Text = "" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update
MsgBox ("RECORD UPDATED SUCCESSFULLY"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub
CODING: NIRMAL ENG COLLEGE Private Sub Command1_Click() If TXTCOURSE = "B.TECH.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BIO.TECH" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BE.ELECTRONIC" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "MSC.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" End If End Sub Private Sub Command3_Click() Form6.Show End Sub Private Sub Option1_Click() If Option1.Value = True Then TXTCOURSE = "B.TECH.IT" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then TXTCOURSE = "BIO.TECH" End If End Sub Private Sub Option3_Click() If Option3.Value = True Then TXTCOURSE = "BE.ELECTRONIC" End If End Sub
Private Sub Option4_Click() If Option4.Value = True Then TXTCOURSE = "MSC.IT" End If End Sub Private Sub cmddelete_Click() Adodc1.Recordset.Delete MsgBox ("THE CURRENT RECORD IS DELETED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Adodc1.Recordset.MoveNext End Sub Private Sub cmdexit_Click() Unload Me Form3.Show End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst MsgBox ("THIS IS FIRST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast MsgBox ("THIS IS LAST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdnext_Click() If Adodc1.Recordset.EOF Then MsgBox ("NO RECORDS FOUND"), vbInformation, "STUDENT COUNSELLING MAINATANCE SYSTEM" Else Adodc1.Recordset.MoveNext MsgBox ("U ARE IN NEXT RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If
End Sub Private Sub cmdprevious_Click() If Adodc1.Recordset.BOF Then MsgBox "NO RECORDS FOUND", vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Else Adodc1.Recordset.MovePrevious MsgBox ("U ARE IN PREVIOUS REORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub Command2_Click() Adodc1.Recordset.Save MsgBox ("SUCCESSFULLY APPLIED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Text1.Text = "" Text2.Text = "" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update MsgBox ("RECORD UPDATED SUCCESSFULLY"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub
CODING: CHANDRU ENG COLLEGE Private Sub Command1_Click() If TXTCOURSE = "B.TECH.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BIO.TECH" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "BE.ELECTRONIC" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" ElseIf TXTCOURSE = "MSC.IT" And TXTMARK <= 65 Then MsgBox "NOT AVAIABLE" End If End Sub
Private Sub Command3_Click() Form6.Show End Sub Private Sub Option1_Click() If Option1.Value = True Then TXTCOURSE = "B.TECH.IT" End If End Sub Private Sub Option2_Click() If Option2.Value = True Then TXTCOURSE = "BIO.TECH" End If End Sub Private Sub Option3_Click() If Option3.Value = True Then TXTCOURSE = "BE.ELECTRONIC" End If End Sub Private Sub Option4_Click() If Option4.Value = True Then TXTCOURSE = "MSC.IT" End If End Sub Private Sub cmddelete_Click() Adodc1.Recordset.Delete MsgBox ("THE CURRENT RECORD IS DELETED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Adodc1.Recordset.MoveNext End Sub Private Sub cmdexit_Click() Unload Me Form3.Show
End Sub Private Sub cmdfirst_Click() Adodc1.Recordset.MoveFirst MsgBox ("THIS IS FIRST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdlast_Click() Adodc1.Recordset.MoveLast MsgBox ("THIS IS LAST RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub Private Sub cmdnext_Click() If Adodc1.Recordset.EOF Then MsgBox ("NO RECORDS FOUND"), vbInformation, "STUDENT COUNSELLING MAINATANCE SYSTEM" Else Adodc1.Recordset.MoveNext MsgBox ("U ARE IN NEXT RECORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub cmdprevious_Click() If Adodc1.Recordset.BOF Then MsgBox "NO RECORDS FOUND", vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Else Adodc1.Recordset.MovePrevious MsgBox ("U ARE IN PREVIOUS REORD"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End If End Sub Private Sub Command2_Click() Adodc1.Recordset.Save MsgBox ("SUCCESSFULLY APPLIED"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" Text1.Text = ""
Text2.Text = "" End Sub Private Sub cmdupdate_Click() Adodc1.Recordset.Update MsgBox ("RECORD UPDATED SUCCESSFULLY"), vbInformation, "STUDENT COUNSELLING MAINTANANCE SYSTEM" End Sub
TESTING
In a software development project, errors can be injected at any stage during the development. Testing performs a very critical role for quality and for ensuring the reliability of software. During testing, the program to be tested is executed with set of test cases, and the output of the program for the test cases is evaluated to determine if the program is performing as it is expected to. Due to its approach, dynamic testing can only ascertain the presence of error in the program; the exact nature of the error is not usually decided by testing. Testing forms The first step in determining the errors in the program. Clearly the success of testing in revealing errors in programs depends critically on the test cases. Testing is usually relied upon to detect the faults that occur during any phase of the software development cycle, in addition to the faults that introduced during the coding phase itself. For this, different levels of testing are used which perform different tasks and aim to test different aspects of the system. The basic levels of testing are unit testing, integration testing, system and acceptance testing.
UNIT TESTING:
Unit testing is a dynamic method for verification, where the programs is actually compiled and executed .It is one of the most widely used method, and the coding phase is sometimes called “coding and unit testing phase”, as in other forms of testing, unit testing involves executing the code with
some test cases and then
evaluating the results. The goal of unit testing is to test modules or ”units” and not the entire software system. The programmer himself most often does unit testing, the programmers, after finishing the coding of a module, test it with some data. The tested module is then delivered for system integration and further testing there are 4 categories of tests that a programmer will typically perform on a program unit
INTEGRATIONG TESTING: After the unit testing the modules is gradually integrated into subsystem, which are then integrated them to eventually form the entire system. During integration of modules Integration testing is performed .The goal of this testing is to detect design errors, while focusing on testing the interconnection between modules. After the system is put together, system testing is performed. here the system is tested against the system requirements to see if all the requirements are met and the system performs as specified by requirements. The entire software is tested and the goal is to see if the software meets the requirements
OUTPUT FORM: FORM
OUTPUT FORM: STUDENT DETAILS
OUTPUT FORM: MARKS DETAILS
OUTPUT FORM: COLLEGE AND COURSES
OUTPUT FORM: SEAT FORM
OUTPUT FORM: ASHOK ENG COLLEGE
OUTPUT FORM: PRABHU ENG COLLEGE
OUTPUT FORM:NOEL ENG COLLEGE
OUTPUT FORM:NIRMAL ENG COLLEGE
OUTPUT FORM:CHANDRU ENG COLLEGE
REPORT FORM:STUDENT DETAILS
REPORTFORM: 1ST GROUP MARK DETAILS
REPORT FORM: 2ND GROUP MARK DETAILS
REPORT FORM: COLLEGE AND COURSES
CONCLUSION
This project incorporates all requirements of a Server. This system has been developed as versatile and - friendly as possible, keeping in mind the advanced features in this technology. This project is friendly to and system interfaces. In this project it as vb 6.0 front end & MSACCESS as a back end. With help of ms access ever Worry data loss and so. It is very secure and safety. Without an authorized person this project can’t be run or update. The STUDENT COUNSELING MANAGEMENT SYSTEM project which help student for their higher
Studies and to select an good college and also a good course.
BIBILIOGRAPHY REFERENCES BOOKS: •
VISUAL BASIC 6.0 AUTHOR: GARY CORNELL
•
VISUAL BASIC FROM THE GROUND UP AUTHOR: CORNELL
•
DATABASE MANAGEMENT SYSTEM AUTHOR: G.V.POST
Related Documents c2h70
Student Counseling Management System 5w6se
December 2021 0
Student Attendance Management System 5p3p3z
November 2019 56
Student Management System 1k2127
December 2019 52
Student Database Management System wu4r
October 2019 87
Student Trainee Management System 1b1jr
November 2019 54
Student Management System 1k2127
November 2019 133More Documents from "Murugan Ramu" o4q4a
Student Counseling Management System 5w6se
December 2021 0
Resolving Power Human Eye 602256
December 2019 68
Taylor And Francis Latex Template For Authors Interact Layout Plus Apa Reference Style 491u55
March 2023 0
Arduino Rpm And Revolution Counter Program 362p5p
September 2022 0
Ducom Linear-reciprocating-tribometer.pdf 432d3e
November 2019 74