Raise Boring En Australia 3i5s6e
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 2z6p3t
Overview 5o1f4z
& View Raise Boring En Australia as PDF for free.
More details 6z3438
- Words: 352
- Pages: 4
RAISE BORING EN AUSTRALIA RUC Cementation Mining Contractors AUSTRALIA
HOME ABOUT RAISE BORING MINING EMPLOYMENT
Fleet Options RUC Cementation Mining Contractors is able to supply a range of Raise Boring equipment, with the expertise and experience to tackle any project, anywhere in the world. Quick Navigation BOX HOLE BORING ROBBINS 53R RAISE BORING INGERSOLL RAND RBM7ROBBINS 61RROBBINS 71RROBBINS 83RROBBINS 85RWIRTH HG330STRATA 850STRATA 950
Fleet > Raisebore Conventional Pilot Drilling
A Tri-cone pilot bit is normally used varying from 9 inches (229mm) to 15 inches (381mm). The 15 inch (381mm) bit is normally used on long holes with a 12⅞ inch (327mm) integral drill steel string with 10⅛ inch DI 42 tool ts.
Conventional Up-reaming of Pilot Hole
On completion of pilot drilling and at such time that the pilot hole breaks through into the lower excavation, a reaming head is attached to the end of the drillstring. The size of the reaming heads range between 1.2 metres and 7.1 metres in diameter.
It is a safe, efficient and cost-effective method of making holes through different geological formations with the use of powerful machines, high strength drillstring and reliable reamer heads. The maximum loading capacity of the drillstring limits the diameter as well as the length of the shaft. The loading is dynamic and only approximately calculateable as tensile, torsional and bending stresses are overlapping.
Down Boring with a Pre-drilled Pilot Hole
In this case an oversize pilot hole is drilled. The cutting head is installed at the top of the pilot hole and drilling takes place in the downward mode. Rock cuttings are flushed down the oversize pilot hole to the bottom of the hole where it is removed. The down boring method is not used often as the risk of blocking the pilot hole and creating mud rushes at the bottom of the hole is high.
Raise Boring offers a safe, efficient and cost-effective method of making holes through different geological formations.
Raisebore Rigs in Australia
Robbins 61R
RBM7
Robbins 71RE
Robbins 83RE
Robbins 85RH
Wirth HG330
Strata 850
Strata 950
Raisebore Capability Chart (Adobe Acrobat Format)Enlarged Capability Chart
HOME ABOUT RAISE BORING MINING EMPLOYMENT
Fleet Options RUC Cementation Mining Contractors is able to supply a range of Raise Boring equipment, with the expertise and experience to tackle any project, anywhere in the world. Quick Navigation BOX HOLE BORING ROBBINS 53R RAISE BORING INGERSOLL RAND RBM7ROBBINS 61RROBBINS 71RROBBINS 83RROBBINS 85RWIRTH HG330STRATA 850STRATA 950
Fleet > Raisebore Conventional Pilot Drilling
A Tri-cone pilot bit is normally used varying from 9 inches (229mm) to 15 inches (381mm). The 15 inch (381mm) bit is normally used on long holes with a 12⅞ inch (327mm) integral drill steel string with 10⅛ inch DI 42 tool ts.
Conventional Up-reaming of Pilot Hole
On completion of pilot drilling and at such time that the pilot hole breaks through into the lower excavation, a reaming head is attached to the end of the drillstring. The size of the reaming heads range between 1.2 metres and 7.1 metres in diameter.
It is a safe, efficient and cost-effective method of making holes through different geological formations with the use of powerful machines, high strength drillstring and reliable reamer heads. The maximum loading capacity of the drillstring limits the diameter as well as the length of the shaft. The loading is dynamic and only approximately calculateable as tensile, torsional and bending stresses are overlapping.
Down Boring with a Pre-drilled Pilot Hole
In this case an oversize pilot hole is drilled. The cutting head is installed at the top of the pilot hole and drilling takes place in the downward mode. Rock cuttings are flushed down the oversize pilot hole to the bottom of the hole where it is removed. The down boring method is not used often as the risk of blocking the pilot hole and creating mud rushes at the bottom of the hole is high.
Raise Boring offers a safe, efficient and cost-effective method of making holes through different geological formations.
Raisebore Rigs in Australia
Robbins 61R
RBM7
Robbins 71RE
Robbins 83RE
Robbins 85RH
Wirth HG330
Strata 850
Strata 950
Raisebore Capability Chart (Adobe Acrobat Format)Enlarged Capability Chart
Related Documents c2h70
Raise Boring En Australia 3i5s6e
December 2019 56
Raise Boring (2) q52e
November 2020 0
Tumi Raise Boring 6g543l
June 2022 0
Aker Wirth - Tunnel Boring Machines, Raise Boring And Full-face Shaft Boring Machines - Mining Technology.pdf 25j2b
December 2019 30
Boring And Jig Boring Machine 3i2i1b
November 2019 84
April 2022 0
More Documents from "Edson Reyes" 1y4o21
6g3p1u
December 2019 26
Raise Boring En Australia 3i5s6e
December 2019 56
6g3p1u
April 2020 16
Antivirus 5b6ng
December 2022 0
6g3p1u
October 2019 142