Pinetron Xm3 Dvr Manual 5d5x43

The remote viewing on network connection may not work on all personal computers due to difference in personal settings and hardware configurations.

17

DIGITAL VIDEO RECORDER

Parsonstown, Mullingar, Co. Westmeath. www.keepsafealarms.ie

Keepsafe Alarms Ltd 044 93 72168

III.QUICK SETUP To turn on the DVR, press [POWER] button on the front or on the remote controller. When the Digital Video Recorder is powered on, the Live Viewing screen will appear in about 30sec. 1) Stop recording first to set QUICK SETUP menu. While DVR is recording, TIME and RECORD menu is not activated. . 2) Enter the using Numeric buttons when prompted for a .

3) Press [MENU] button to display the QUICK SETUP screen. 4) QUCIK SETUP menu appears once a is entered. 5) Use Directional buttons to select menu and press [ENTER] button to confirm.

18




1. TIME When the Digital Video Recorder is powered on for the very first time, it is important to set the exact date and time.,

1) Select “Time” on TAP menu by using Directional buttons. 2) Enter the Date and Time by pressing numeric buttons on the remote controller or “–/+” on the unit. 3) Press [ENTER] button to exit a menu with saving changes. Press [ESC] to exit a menu without making changes.

2. RECORD This is an easy setup for recording.

2-1. RECORD MODE 1) Select “RECORD MODE” on TAP menu by using Directional buttons. 2) Select MODE by pressing “–/+” buttons on the remote controller or on the unit. 3) Press [ENTER] button to exit a menu with saving changes. Press [ESC] to exit a menu without making changes. • CIF, 4/8/16Ch: Each channel records at CIF resolution at same rate: 360x240(360x288).

RECORD • Field, 4/8/16Ch : Each channel records at Field resolution at same rate: 720x240(720x288). MODE • Frame, 4/8/16Ch :Each channel records at Frame resolution at same rate: 720x480(720x576). • Frame + CIF : Channel number 1 - 720x480(720x576) + Channel number 2~4/8/16 - 360x240(360x288).

2.2. RECORD DAYS 1) Select RECORDING DAYS by pressing “–/+” buttons on the remote controller or on the unit. 2) Press [ENTER] button to exit a menu with saving changes. Press [ESC] to exit a menu without making changes. 19




2.3. PRIORITY 1) Select “RATE” or “QAULITY by pressing “–/+” buttons on the remote controller or on the unit. 2) “RATE” : DVR is set up with high recording speed mode automatically. 3) “QUALITY” : DVR is set up with high picture quality mode automatically. . 2.4 RECORD SETUP INFO This displays the picture quality and recording speed. 1. START RECORDING

NOTE

: When setup is finished, press [REC] button on the front or on the remote controller to start recording, 2. For individual recording setup of each channel and more specified setup, enter into RECORD in main menu. Please refer to 3. ADVANCED for how to enter into main menu.

3. ADVANCED

Select “ON” or “OFF” by pressing “–/+” buttons on the remote controller or on the unit. 1) “ON” : Select this to enter into main menu and press [ENTER] button to exit a menu with saving changes. z

Escape from “QUICK SETUP” menu by pressing “ESC” button.*

z

Press MENU button again to enter into MAIN MENU.

2) “OFF” : Select this to stay on “QUICK SETUP” menu. 3) To resume QUICK SETUP menu from Main Menu, refer to 2-1 DISPLAY SETUP part in manual

20




IV.LIVE VIEWING 1. Display Overview Recording Mode Event Indicator

Camera No and Title

Status

1. (1) Indicate Alarm In terminal is triggered by an alarm sensor. To disappear, press [CANCEL/ESC] button on remote controller or [CLR] button on the front . (2) Indicate Motion detected. To disappear, press [CANCEL/ESC] button on remote controller or [CLR] button on the front . (3) Indicate Video Loss during Recording. To disappear, press [CANCEL/ESC] button on remote controller or [CLR] button on the front . (1) (2) (3) (4) (5) (6) (7)

2. (1) Indicate Built-in CD/DVD-R/W is connected. It’s changed to blue color while it’s doing backup. (2) Indicate an USB Device is connected on Back . It’s changed to blue color while it’s doing backup (3) Indicate an USB Device is connected on Front . It’s changed to blue color while it’s doing backup (4) Indicate the DVR is recording now. (5) Indicate Schedule Record mode is on. It’s changed to blue color when Schedule Record starts. (6) Indicate Audio Data is stored the selected time during playback and turn to blue color. (7) It shows Number of Client, which is connected to Network.(MAX:3)

21




3. 4.

: Displays Year, Month, Time and Date. : Show you the remaining recording time of the DVR. If remaining HDD capacity is less than 4GB, this blue “Recycling” icon will be shown up.

2. Multi screen Display and Sequencing 2.1 Full Screen Display Select any camera for Full screen display by pressing the Number button of the desired camera.

2.2 Multi screen Display and Sequencing Display.

Press [DISPLAY] buttons to activate the multi screen display. It is changed the order as among your choice of SPLIT MODE. While in 16-way screen display, press [DISPLAY] buttons for 1second to begin full screen sequencing. The sequence mode and dwell times are programmable. For detailed information about configuring those, see “SEQUENTIAL SETUP”. If the sequence mode is not activated, it moves to Quad mode instead of Sequencing.

● 4Ch : 4-ways screen display is fixed and activated as default. ● 8Ch : 9-ways screen display is fixed and activated as default. ● 16Ch : 16-ways screen display is fixed and activated as default.

22




2.3 Repositioning To reposition a camera view on screen, 2.3.1.

Virtual Remote controller

① Press

button on virtual remote controller by using mouse, then

displayed on screen. Move

Mark will be

icon to the desired position by pressing directional buttons on remote

controller or virtual control pad. ② Press a Numeric button to reposition the selected camera. Press [Enter] button to exit here with saving changes.

2.3.2. Remote controller : Press

(EXT.SEARCH) button on remote controller, then

Mark will be displayed

on screen. 2.3.3. Mouse : Drag the selected camera to the position you wish to reposition by using mouse.

23




3. Zooming During live view mode or playback, it is possible to zoom into a section of the screen to get a close-up view of the screen. 1. To activate the digital zoom, select the full screen display of the camera you wish to zoom. 2. Then press the [ZOOM] button on IR Remote controller. Zoom area box pops up, as shown below.

x2

x4

] buttons. 3. Move the box to the desired position using Direction [ 4. Press [+] button to enlarge the image. Press [ - ] button to zoom out the image. 5. Press [CANCEL] button to return normal mode. If the Zoom button is pressed while in a multi-screen display, zoom operation is not activated.

4. Spot Monitor In addition to the Main Monitor, attaching a Spot Monitor enables to monitor specific channels independently form the main monitor y Press [Spot] button on the remote controller, then press number button you wish watch as full screen. y Press [Spot] button twice to auto switch cameras. Sequence interval can be set from the Sequential Setup. y When an alarm has been triggered, that specific channel will go into Full Screen.

24




V. OPERATION 1. Main Menu Overview When the DVR is powered on, Live Viewing screen will appear after initialization about 30sec. Press [MENU] button to access the main menu.

An Box will appear. Enter

the using Numeric buttons on IR remote controller or CH increase button on Front . Default is ‘000000’. Main Menu appears after proper entered, shown as below.

Factory default / is [000000]. It is recommended to change the “” when you install the DVR. Refer to [System Setup]. １. Use Direction buttons

[

] to select the desired menu. Items selected in the menu are

represented in color. ２. Press [ENTER] button to select the menu and display Sub-Menu. Use Left/ Right buttons [

] to

select on TAP menu. Selected items changed into [ORANGE] color.

Selected

Not selected

* It is automatically saved changes when you move between TAP menus. 3.

Press [ENTER] button to exit a menu with saving changes. Press [CANCEL] to exit a menu without changes. 25




2. Display Option 2.1. Display Setup

1. Use Direction buttons [

] to select “DISPLAY” menu. Then, press [ENTER]

button to display “DISPLAY SETUP”. 2. Use Left/Right buttons [

] to select on TAP menu (

).

Selected items changed [ORANGE] color.. 3. Use Down [T] button to specify. 4. Use

[-, +] button to change the values

ITEM

ADJUSTMENT y Select “Show” or “Hide” below status bar on Main Monitor.

STATUS BAR

CAMERA BORDER LINE

BACKGROUND

SPLIT MODE

QUICK SETUP

y Select On-Screen-Display information for Camera Number and Title. y Select Board Line between cameras. [WHITE Æ GRAY Æ DARK GRAY Æ BLACK] y Select Background color on NO VIDEO status. [GRAY Æ DARK GRAY Æ BLACK Æ BLUE Æ WHITE] y Display is changed the order as shown below among your choice of SPLIT MODE. ySelect “On” to resume “Quick SETUP” menu and “Off” to stay on main menu setup.

5. Save changes and exit the menu, press [ENTER] button. Exit the menu without making changes, press [CANCEL] button.

26




2.2. Sequential Setup (Auto Sequence)

ITEM DWELL TIME

DEFAULT

ADJUSTMENT

2 Sec

y Specify the dwell time of each camera or Multi screen mode is displayed. Use [-, +] button : [1 second ~ 30 second]

SEQ. MODE

None

FULL SCREEN

ALL

y Select desired sequence mode to switching. y Select the cameras to be included or excluded from the automatic sequencing.

27




3. Camera Setup 1. Use Direction buttons [

] to select “CAMERA” menu. Then, press [ENTER] button to

display “CAMERA”. 2. Use Left/Right buttons [

] or Number button to select the Camera you wish to configure.

3. Use Down [T] button to move specified menu and use Left/Right buttons [WX] to select other item. 4. Use [-, +] button to change the value.

ITEM

DEFAULT

ADJUSTMENT

BRIGHTNESS

50%

y The brightness of each camera can be adjusted by pressing [-,+] buttons.

CONTRAST

50%

y The contrast of each camera can be adjusted by pressing [-,+] buttons.

COLOR

50%

y The color of each camera can be adjusted by pressing [-,+] buttons.

SENSITIVITY

10

y Level 1: Low sensitivity~ Level 20: High sensitivity. y Use this menu to setup Zones for the motion detection The screen shown below will overlay the current video image. y Motion zones are set by on – it’s covered as cross stripes Screen.

MOTION GRID

y

It is divided into 16 Grid and selected by Number button on IR Remote. : Select All.

y y

:

: Cover All.

y

Motion detected zones will be changed to BLUE Color.

28




Motion Detected zones

y USE Numeric button to select Motion Grid. GRAY Will be cleared. Or Use <+> button to select Motion Grid at Front . Running Man Icon

will be

activated. <+> button is used for selecting and cancel. Use <-> button to escape from Grid Menu.

y It is also possible to select smaller motion grids for more precise motion detection by using CMS.

No COVERT

y If the Covert Mode is “YES”. Selected camera is invisible from all live displays, playback and Network while continuing to record. Covert cameras are viewable after change into “NO” .

Camera # TITLE

y A combination of 12 digits and alphabets can be entered to label each camera. Press appropriate Numeric button to type camera title. It’s up to 12 characters. See Next chart.

None P/T/Z ID/MODEL

Camera No

y Select P/TZ camera model to control. ySelect appropriated channel for the PTZ camera. Camera ID means Camera address.

5. Save changes and exit the menu, press [ENTER] button. Exit the menu without making changes, press [CANCEL] button.

29




1st

2nd

3rd

4th

Press

Press

Press

Press

1

A

B

C

1

2

D

E

F

3

G

H

4

J

5 6

No

1st

2nd

3rd

4th

Press

Press

Press

Press

7

S

T

U

7

2

8

V

W

X

8

I

3

9

Y

Z

@

9

K

L

4

0

.

-

_

0

M

N

O

5

10+

SPACE

P

Q

R

6

No

30




4. Continuous Recording (Normal Recording) The DVR comes with a certain preset settings from the factory. Therefore once the DVR is installed, immediate recording is possible after pressing the record buttons. By default, audio alarm, motion recording are off. １. Use Direction buttons [

] to select “RECORD” menu. Then, press [ENTER] button to

display “RECORD”. ２. Use Direction buttons [

] to select the Camera you wish to configure.

３. Use [-, +] button to change the value.

ITEM

ADJUSTMENT y Select recording speed for each camera.

RATE

: Recording resolutions is changed to Frame, Field and CIF mode.

QUALITY

MOTION

ALARM

y Specify the record picture quality for each camera. ULTRA Æ SUPER Æ HIGH Æ MIDDLE ÆLOW ySelect Motion Recording ON or OFF. Camera does not record under normal conditions. It is discussed on EVENT Section. ySelect Alarm Recording ON or OFF. Camera does not record under normal conditions. It is discussed on EVENT Section.

Press [MENU] button on each Item at first line to apply all setting for the rest channel.

5. Save changes and exit the menu, press [ENTER] button. 6. Press [REC] button. Then, the red REC LED lights on the front and recording starts. 7. To Record stop, press the “ STOP” button on IR remote or on Front .

31




< Approximate File Size> Quality

NTSC

PAL

720x480

720x240

360x240

720x576

720x288

360x288

UNIT

LOW

5.1

3.2

2.0

6.1

3.8

2.4

KB

MIDDLE

7.2

4.5

2.8

8.6

5.4

3.4

KB

HIGH

10.2

6.4

4

12.3

7.7

4.8

KB

SUPER

15.4

9.6

6

18.4

11.5

7.2

KB

ULTRA

24.6

15.4

9.6

29.5

18.4

11.5

KB

* It is calculated by theoretical, therefore it may be different depends on Video Signals or other conditions in actual.

32




5. Schedule Recording The schedule chart shows a graphical representation of the defined record mode: Mode1~4. However, the schedules are only displayed if a corresponding schedule has been configured in the schedule menu. １. Use Direction buttons [STWX] to select “SCHEDULE” menu. Then, press [ENTER] button to display “Schedule Chart”. ２. Use Left/Right buttons [WX] to select on TAP menu (

).

３. Use Down button [T] to select any Day you wish to configure.

It breaks down the days of the week in eight different categories: ALL, SUN, MON, TUE, WED, THU, FRI and SAT. ALL is for everyday of the week. Daily schedule has priority to ALL. ４. Press [Enter] button you wish to configure. The detailed menu pops up for selected Day, as shown below.

５. Enter the beginning and end time, then select Record mode to record. (1) BEGIN: The time of recording start. (2) END: The time of recording end. The ending time must not be before the starting time or the same as the starting time. It must be any time over the starting time. (3) MODE: Up to 4 different recording modes can be pre-determined for schedule recording. (MODE1 ~ MODE4)

33




６. Define modes below.

* Refer to Basic Recording for set up y The recording time is set by 24H(00:00 - 23:59). You need to set 2 days if the setting is over one day. D/W

BEGIN

END

MODE

Monday

18:00

23:59

MODE 1

Tuesday

00:00

08:59

MODE 1

y The recording would not start when Ending time is ahead of Start time. EX) D/W Monday

BEGIN

END

MODE

18:00

08:59

MODE 1

７. To activate the schedule recording after setting, press the SCHEDULE button.

The SCHEDULE indicator illuminates. When a program covers the current time, the REC indicator illuminates and the unit begins recording. Please note that if there are no schedules configured, then the DVR will not record. ８. When the scheduled recording time is over, the REC indicator goes off and recording stops. ９. If you wish to stop recording while scheduled recording, press the SCHDULE button, then the SCHEDULE indicator goes off and the Schedule Recording Mode is released.

34




6. Event １. Use Direction buttons [

] to select “EVENT” menu. Then, press [ENTER] button to

display “EVENT”. ２. Use Direction buttons [

] to select the Camera you wish to configure.

３. Use [-, +] button to change the value.

In this section, s may set different event recording set up to select frame and image quality by each camera.

35




7. Device

The menus are displayed with options on the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the Direction buttons [

].

7.1 GENERAL ITEM POST RECORD TIME

ADJUSTMENT y Determines the duration of the DVR continues record after Event detect. [10SEC ~ 300 SEC ]. By default 10 sec.

y Select audio recording device usage: ON or OFF. (Audio 1 ~ Audio 4 : Ch 1 ~ Ch 4) AUDIO RECORD

The audio data is always recorded in real time unlike the video data that can be recorded in various modes including real time. There may be a slight delay in synchronization of the audio to video

KEY TONE

KEY SENSITIVITY

y By default, the DVR emits a beep every time a button is pressed. Set the key tone to off to turn button beep off. Default by “ON” y The sensitivity of touch buttons on front can be controlled in this setting.

36




7.2 ALARM

ITEM RECORD CAMERA

ADJUSTMENT y ALL: Start to record All Alarm “ON” channel if there is any Alarm signal is triggered. y 1:1: Start to record the channel, which Alarm is triggered. y ON: The buzzer Sounds if an alarm is triggered. The buzzer will sound for the duration of the RECORD TIME. This buzzer related with Alarm Out. Please configure Alarm Out “N.O. or N.C.” for Alarm

ALARM BUZZER

buzzer. yOFF: Disables the ALARM BUZZER function. Press [-] button to stop the buzzer immediately. Stopping the buzzer does not stop the alarm recording.

y Configure which relay will be triggered when an alarm is activated per camera. Select from four available options: ALARM OUT1

Video Loss, Motion, Alarm ALL, Each Alarm, HDD Fail. y Press [Cancel] button to stop Alarm Out. It will be cleared by an order: Alarm>Motion> Video Loss

INPUT

Change the input type. Use [-, +] button to change the values.

2. Save changes and exit the menu, press Enter button. Exit the menu without making changes, press [CANCEL] button.

37




8. Network Setup The static service consists of an IP address that remains constant for the duration of the contract of the internet service, whereas the dynamic service consists of an IP address that frequently changes every time a new connection is made through the provided modem, or recurrently in a given period of time. Though most internet service providers offer both solutions, this manual will distinguish the two solutions according to the commonly available service type to configure the DVR for the networking purposes.

8.1. IP setup １.

Use Direction buttons [

] to select “NETWORK” menu.

Then, press [ENTER] button to display “NETWORK”. ２. ３.

Use Down button [ ] to specify the detail. Use [-, +] button to change the value.

４.

Save changes and exit the menu, press [ENTER] button. Exit the menu without making changes, press [CANCEL] button

ITEM

ADJUSTMENT y STATIC IP: Edit IP address, Gateway and Net Mask. y DH: Dynamic Host Configuration Protocol.

CONFIG

It is automatically set on from Local DH if there is Local DH server (i.e. The local Router) . if the DH is set to ON, the IP address, Gateway and subnet Mask will be assigned by DH server.(i.e.The local area network Router)

IP ADDRESS

y Enter the static IP address

NET MASK

y Enter the IP address of subnet mask.

GATEWAY

y Enter the IP address for the internet gateway server.

DNS SERVER

y the name of the domain name system y Select “0000 ~ 9999”

PORT

Enter the port number that the client will use to communicate with the DVR over the internet. The default port is 7000. It is recommended to use over 1,000.

38




y ADD : Activating Auto port forward by above port.

AUTO PORT

y DELETE : Inactivating Auto port forward by above port. ※ This Function is only able to be used on router which s UPNP.

8.2. E-Mail This DVR allows you to specify the events that generate notification. Sends e-mail notification if an event occurs such as alarm or motion is detected and so forth.

The mail server can use either the DVR mail server or your existing e-mail settings. The menus are displayed with options on the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the Direction buttons [ ADJUSTMENT

ITEM OFF

USE

].

Default

SMTP

y Select the e-mail notification on or off. The default is off. y Default it is provided by manufacture. Mail notification options and mail address settings are available. y SMTP Configuration TAP will be activated to set up your own mail settings. y Enter the e-mail server name or IP. To server name, using the virtual

Server

keyboard, or pressing appropriate Numeric button on IR Remote or front .

SMTP

PORT

y Define the port that the SMTP server will communicate through. By default, it set to 25.

AUTH

y Check this if your mail server requires authentication.

ID

y Enter the ID/name and for the SMTP Server.

(It is recognized as a small letter, even it’s displayed as a Capital Letter).

E-MAIL ADDRESS

y 5 mail addresses can be configured for mail notification.

39




8.3 DDNS This DVR offers free dynamic DNS update. It keeps track of your changing IP address.

It’s

easiest to use.

ON

The menus are displayed with options on the left-hand column and settings in the right hand column.

A cursor (highlighted menu) can be moved using the Direction buttons [

ITEM

].

ADJUSTMENT y OFF : NO use of DDNS y DEFAULT : Default it is provided by manufacture. We offer DDNS service for remote at http://www.dvrhost.com If you are using for DDNS, you do not need to setup anything. It’s not allow to you create host name. It’s providing by DVR. Press [info] button on IR remote or Front , then check your host name.

USE

Host Name Mac address

For example, http://Y006017.dvrhost.com:9000 y DYNDNS : To use your own domain name service or “dyndns.com” DIMAIN NAME ID

y Enter the name you set for the DDNS web configuration. y Enter your ID.

y Enter your .

DDNS TEST

y Click the button to confirm the connection. A success message will appear.

40




8.4. Router & Port Forwarding The majority of any network will often consist of a single IP address which shares the internet access through a router. This IP address may be any external (public) static IP address or any dynamic IP address issued by the Internet Service Provider. The purpose of a router is to enable multiple personal computers and any other devices that require internet connection to access the internet simultaneously.

Most routers by default

enable (open) commonly used ports so that mainstream applications such as Hypertext Transfer Protocol (HTTP, Port 80), File Transfer Protocol (FTP, Port 21), Telnet (Port 23) and Post Office Protocol 3 (POP3, Port 110) are used. To solve the firewall problem and let visitor into the network, the instructs the router to allow traffic to through on a given port. This is known as Port Forwarding, as the router forwards (directs) all internet requests on a specific port to the local machine. With port forwarding, external visitors are able to connect to the DVR while other internal devices remain protected. Here is the example of DVR connection. PC Connect position

Network

Router

① LAN

DVR IP Setting

PC Connect position

CF

② WAN

A

B

C

B

C

STATIC

○

△

Ｘ

★

★

DH

○

▲

Ｘ

☆

★

STATIC

○

○

○

use

Check the DVR IP of info and set into Router.

Static IP ○

○

x

N/A [Need Local DH

DH

Server]

STATIC

○

△

Ｘ

★

★

DH

○

△

Ｘ

★

★

use

Check the DVR IP of info and set into Router

DH STATIC

N/A

x DH

△

41

△

PPPOE is not ed




1) Description of Location. A. LAN: Connect by Local IP. If you are connection from within your network, you only need to enter the IP address of the system into the S/W (ex. 192.168.0.50) B. WAN: Connect by DDNS. If you are connecting from outside your network, use the DDNS to configure the S/W.(Ex. L123456.dvrhost.com). C. WAN: Connect by IP address. If you are connecting from outside your network and if you know your Static IP address , use the IP address to configure the S/W. (Ex. http://124.137.23.72:6000 ) 2) Description of Symbols. ○ : Connected. x : Not able to connect △: There’s some limitation depends on Router or Network connection ★ : Need to use Port Forwarding 3) Description of Color. Yellow - Recommended Grey

- Non available

White – Depends on Router or Network condition. 2. How to use DVR for DH

Router:

Internet

: Port Forwarding /DMZ

: DH

DVR : DH

DVR : Static IP

Each Router has different port forwarding settings. Please refer to the router manual or to your router manufacture for assistance.

42




8.5. MISC.

ITEM

ADJUSTMENT y Select the network bandwidth to limit the amount of network resources

BANDWIDTH

allocated to client connection. The default is unlimited : “ 64 KBPS ~ UNLIMITED”

43




9. System Setup 9.1. General

１. Use Direction buttons [STWX] to select “SYSTEM” menu. Then, press [ENTER] button.

２. Use Left/Right buttons [WX] to select on TAP menu ３. Use Down button [T] to specify the detail. ４. Use [-, +] button to change the value. ５. Save changes and exit the menu, press [ENTER] button.

Exit the menu without making changes, press [CANCEL] button. ITEM

ADJUSTMENT y To select the DVR to be controlled with the remote controller, press and hold the DVR ID button. While holding the DVR ID button, press the appropriate

SYSTEM ID

DVR ID number. For example, enter 05 for DVR ID 05, enter 43 for DVR ID 43, and such. y Set the ID of IR controller on “00” to control DVRs at the same time, whatever DVR ID are. yThe DVR locks all the buttons after three minutes of inactivity like a

AUTO LOCK

Screensaver. The buttons can be unlocked with the . Default by “OFF”. yCIF, 4Ch, 8Ch, 16Ch (Default setting) : The system records each camera individually and then multiplexes them. Each channel records at CIF resolution: 360x240(360x288). yField, 4Ch, 8Ch, 16Ch : The system records each camera individually and then

RECORD MODE

multiplexes them. Each channel records at Field resolution: 720x240(720x288). yFrame, 4Ch, 8Ch, 16Ch : The system records each camera individually and then multiplexes them. Each channel records at Frame resolution: 720x480(720x576) yFrame + CIF : Channel number 1-720x480(720x576) + Channel number 2(~4/8/16) : 360x240(360x280)

44




PB DEINTERLACE RUN ON BOOT FACTORY DEFAULT

y ON: Reducing image flickering but less picture quality. y OFF: Better picture quality for still image but having flicker for moving picture. y This is the purpose to start REC without pressing REC button when you turn on. y If you choose “OFF”, The window will not be shown except POWER/ SERVICE MENU/ RECORDING STOP/ SCHEDULE RECORDING STOP. • To restore factory default settings, stop recording and then execute “START” by using ENTER button.

9.2. Time

ITEM

ADJUSTMENT

DATE

y Enter the Date

TIME

y Enter the Time If several DVRS are installed and connected via network, one of the DVRs or PC may be set as the master clock. This unit will control the date and time for all of the other units. y ON: It is set as the Slave Clock.

TIME SYNC

y OFF(Default): Master Clock or The unit which does not use Time Sync Function.

Install “DVR TimeSynclnstller.exe “. It starts automatically. The DVR will communicate though “UDP4014 Port” with Window for TimeSync at every 10 sec.

TIME SERVER

y Enter the IP of Master clock DVR or PC when the unit is set as [ON] on Time Sync Menu.

<note> Please STOP the recording before Time Setting.

45




9.3.

can define each ’s Authority. Select 1~5 , then select Activate option on or off. When enabled, it will be possible to check individually under settings: Monitoring, Playback, Back up, Network, Configuration (Main Menu Setup), Shutdown (Power off), Record stop. Enter the 6 numbers for the new , and then re-enter the same under COMFIRM section.

The asterisks will advance automatically as the numbers are entered.

46




9.4. DISK

ITEM

ADJUSTMENT 1. Stop the DVR completely before the disk format. 2. Use [-, +] button to change select device. * Internal HDD * USB – Memory Stick * USB – CD/DVD-RW * USB – HDD

FORMAT

Wen you format USB-HDD, it is formatted to FAT 32 format type. 3. Use down button [T] to move

, then press [“+” or “ –“] button

to start formatting. 4. Formatting will begin, and the progress will be displayed at the bottom of the window. Please not that it takes 10~30 seconds for format a HDD. 5. When formatting is finished, it will display COMPLETE, and also SUCCESS at the bottom of the window. s may select the record policy of the system’s internal hard disk drive. By default, the system’s hard disk drive is set to overwrite from the beginning when it OVERWRITE

becomes full. yON: By default, the hard disk drive will overwrite from the beginning when it becomes full. yOFF: It stops recording after HDD is full.

DISK MONITOR

y It stops automatically if HDD failure happens. It starts to “Monitoring” again after DVR reboot . (Use [-, +] button to stop or start) Allows you to configure when the DVR automatically deletes all data from HDD. It lefts the

RECORD LIMIT

data for below duration from current time. [NONE Æ 12HOURS Æ 1DAY~ 6DAYS Æ 1WEEK ~ 4WEEKS -> 30 DAYS ]

47




9.5. UPDATE.

1) the latest firmware file and copy to USB Flash memory stick in the Root Folder. 2) Turn on your DVR (If you are using, please stop the recording)

Indicator

CONDITION

H/W VERSION

y Shows the Main PCB version of the system.

S/W VERSION

y Shows the Software version of the system.

3) Plug USB memory stick into the front or rear USB port and check if USB icon shows up on the Status bar. 4) Move to upgrade menu and start upgrade by pressing [+]/[enter] button. 5) Wait until upgrade finished and show “Success” message, then Press [+] to restart.

1.

Please make sure your USB Flash memory stick has enough space for update file size.

2. Do not make special folder into memory stick for these files. 3. Do not format the USB at window, just remove all files inside. 4.

Do not switch OFF or PRESS any key during the upgrade process.

5.

Please consult with your installer or seller before upgrade DVR.

48




9.6. INFO

Press info button on IR remote to display the information. The other menu is blocked to move.

This menu provides information such as listed below.

Indicator LANGUAGE MODEL HOSTNAME. MAC NETWORK INTERNAL HDD

CONDITION y Display Current Language and you can change language here. cannot change Language while it’s under recording mode. y Display Channel Number and compression. y Display hostname and Mac Address. y Display MAC address. y Shows the current IP and Port of this unit. yDisplays numbers of HDD and total HDD size.

USB (FRONT)

y Displays what kind of device is connected to the front USB connector.

USB (REAR)

y Displays what kind of device is connected to the rear USB connector. y Shows the Primary HDD status. A : Master, B: N/A

IDE BUS

<note> It will be displayed when the HDD S.M.A.R.T function. Please change this HDD to NEW HDD in the case of “WARNING”. ** “ERROR” means the HDD damaged physically.

49




VI.PAN/TILT ZOOM CONTROL 1. P.T. Z Menu 1. To activate the Pan/Tilt Control, select the full screen display of the camera you wish

to control. 2. Then press the [P/T/Z/FOCUS] button. Shortcut Menu box pops up, as shown below.

Please Refer to Help Menu for specific control.

INDICATOR

RESULTING ACTIONS y Press this button to display “HELP” Menu. Press [ENTER] Button again, or [CANCEL] button to cancel Help Menu.

[ENTER] Button

y Press this button to cancel “PAN/TITL” Operation. [CANCEL] Button y PTZ camera control interface will be extended to use whole function. Press this button again to make short-cut menu.

[MENU] Button

y To Tilt up and Down. y To pan Right and Left.

y Zooming In and Out.

50




The layout of the PTZ interface conforms to the layout of the front of the DVR or the remote controller. Menu button is the guide anchor position for all other buttons.

When in PTZ

interface mode, all buttons used for the PTZ related operation. ** Please Check below items before using PTZ Camera. 1. RS 422/485 Connection, camera Jumper Setting and etc 2. Set the PTZ Camera ID & MODEL NO at the Display menu

2. Preset & Tour Button

Function Set preset position; SPOT OUT on remote controller Move the PTZ into desired location. Press the Preset button. Custom 1 will illuminate. Set the # for the Preset location. Press Enter to save and exit. Go to preset position; INFO on remote controller Press Go to button. Enter the desired Preset # and press Enter. Start Auto Tour; BACKUP on remote controller Press Auto Tour Button. Press the + button and enter the range of Preset and press Enter. For Example, Auto Tour Button, +5 will start the tour of 1 ~ 5 presets of the PTZ Camera

3. Custom Functions Button

Function PTZ custom function 1; DISPLAY on remote controller

PTZ custom function 2; ZOOM on remote controller

PTZ custom function 3; P/T/Z on remote controller

Please refer to the PTZ manufacture’s instruction manual for proper jumper settings to match the protocols to the DVR.

51




4. PTZ Camera Model - PAN/TILT/ZOOM Camera List Esc/ # 1

Model Name NUVICO, NV 9600 BPS

3X

Speed

Preset

Go to

Tour

o

o

o

o

o

o

o

o

o

o

A. Pan

A.Tilt

Pat

Me

Enter

o

o

o

o

o

o

o

o

o

MERIT LILIN, PIH2

7000/7600

3

VCL, Orbiter Microsphere

o

o

o

o

4

SAMSUNG, SCC-641

o

o

o

o

5

NEC, NC-21D

o

o

o

o

6

SUNKWANG, SK2107

o

o

o

o

o

7

RESERVED

o

o

o

o

o

8

D-MAX, PTZ PROTOCOL

o

o

o

o

o

9

LG, LPT-A100L P/T/Z

o

o

HONEYWELL, GCC10

655N

11

WONWOO, PT-101

12~14

o

PELCO, D 2400~9600

o

o

o

o

o

15

C&B TECH, AN200

o

o

o

16

CANON, VC-C4

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

o

17~19

PELCO, P

2400~9600

20~22

PELCO, EP 2400~9600

o

o

o

o

o

o

o

PANASONIC, 23

WV-CS/W85x,86x

o

o

o

o

HONEYWELL, HSDN24

251N/P GE/KALATEL,

25

CyberDome

o

o

o

o

o

26

DY ELEC, SmartDome

o

o

o

o

o

27

BOSCH, TC8560/TC700

o

o

o

o

28

SYSMANIA, ORX1000

29

AD, DELTADOME

o

o

o

o

30

HUNT, HTZ-2300

o

o

o

o

o

31

HAZEM, RESERVED

o

o

o

o

32

RVT, EZ Protocol

o

o

o

o

o

33

LG, MULTIX

o

o

o

o

o

o

52

o o




ELMO, 34

PTC-200C/400C

o

o

o

o

35

NICECAM, MP-1xxx

o

o

o

o

o

o

o

o

o

o

o

o

C&B TECH, CNB36

PTZ102

37

IKEGAMI, PCS I-LAN

o

38

IKEGAMI, lCD I-LAN

o

39

Reserved

o

o o

o

o

o

TOA, SC80 SYSTEM 40

CONTROLLER

o

o

o

o

o

o

o

41

TOSHIBA, SC1000

o

o

o

o

o

o

o

42

BBV, TC 9600 BPS

o

o

o

o

o

o

o

o

Speed has 0~8 steps

1 (Slow) – 8 (Fast) * 0 – Keep Pressing the button to increase speed

53




VII.SEARCH/ PLAYBACK 1. Time Search 1. To start playback, press

[Time Search] button, Time search Calendar Menu

pops up, as shown below.

2. Use

Left /Right button to change select Month on

.

It will not be changed if there are no stored data on previous/next month. The data are color-coded by category: Alarm(Red) > Motion(Green) > Normal (Yellow)

3. Use Up/Down buttons [

] to select “DAY” on Calendar. Selected data will be shown as a

graphical representation of the recorded video stored on the DVR. 4. Select “Hour and Minutes“ or ”the camera” you wish to playback. Then press [ENTER]

button.

Time

: Mulitscreen Display

Camera : Full screen Display

5. Press [ENTER] button to start playback. 54




2. Log List Search/Alarm, Motion Search The logs can be used to search and review directly to a point in time of the recorded data. Alarm, motion, video loss and system related logs can be searched and played back directly from the time of the incident. １. To start Event Search, press

[Log] button on the front, then Log List Menu pops up, as shown below.

MENU TAP ALL SYSTEM NETWORK

CONDITION y It has a list of all the events since the initial power on procedure of DVR y It shows All Event except for Alarm, Motion, and Video Loss. y It shows NETWORK List.

ALARM

y It shows All Alarm List.

MOTION

y It shows Motion List.

VLOSS

y It shows Video Loss List.

2. Use Up/Down buttons [TS] to desired “Time” to playback. Use Left/Right buttons [WX] to move NEXT page. 3. Press [ENTER] button to start playback. Log list is saved on HDD. To save log output, please connect USB memory stick into USB port on front. Then press Display button on each category to backup Log data. USB Icon will be flashed as Blue.

55




VIII.BACKUP 1. Internal CD/DVD- R/W Backup Backup process to the CD-RW and DVD-RW only works on manual method due to the limited capacity of the medium.

1. Insert a blank Media into Built-in CD. Please note that CD/DVD-RW disks must be formatted before backup. Disk Format is discussed in Disk Manu.

2. Press [BACKUP] button on IR Remote and the backup menu will appear.

3. Use [-, +] button to change select device: Rack-CD/DVD RW 4. Use [-, +] button to select channel. All channels are set by default. 5. Please select the data for BACKUP. (1) ALL CAMERA : Recording all channels (2) NORMAL: Normal Recording Data (3) ALARM: Alarm Recording Data (4) MOTION: Motion Recording Data The illustration to the left has selected ALL CAMERA, NORMAL, ALARM and MOTION data. 6. File format will be saved as “.s” AVI is not ed for CD/DVD 7. Select the time range starting time and ending time. 8. Enter the numbers as required in 24-hour format, then move to

.

9. Press [+] button to start BACKUP. * CD/DVD indicator will be changed to [LIGHT BLUE] Color that the backup is in session.

RACK-CD/DVD ROM z

The progress of the backup will be displayed at the bottom of the window in percentages of the entire backup process. Please note that the internal CD-RW icon’s color will change blue to signify that backup is in progress. The OSD will be disappeared by pressing cancel button.

56




However, pressing Backup button again will show the Backup status. It is recommended while the DVR is in backup session, please do not perform playback. 10. When finished, the CD icon will changed to Grey color, and then eject the media. z

If there is not enough space on the media, the DVR will automatically eject the disk when it’s full, then will resume the process once a new media is inserted in to the drive.

2. USB Memory Stick / External USB HDD Backup USB Memory stick or External USB-HDD is recognized within 10 seconds after plug in USB Connection cable to UBS port in DVR.

z

You must stop all recording before performing backup to Memory stick or external USB HDD.

z

ONLY FAT 32 Format disk will be read through Window PC.

z

The data in FAT 32 format disk is not replayed on DVR. Format is discussed in “SYSTEM>DISK” Section.

1. Plug in USB connector into the USB connection port on the front . 2. Press [BACKUP] button to display the backup menu.

3. Use [-, +] button to change select device: USB MEMORY STICK or USB – HDD 4. Please select the data for BACKUP. 5. Enter the numbers as required in 24-hour format, then move to

.

6. Press [ENTER] button to start BACKUP. * USB icon will be highlighted in blue during the backup. • If there is not enough space on your USB memory stick, the system will not proceed with backup.

USB Memory Stick

z The backup progress indicator will be displayed at the bottom of the window. While the system is in backup session, please do not perform playback. 57




7. After backup process is finished, USB icon will be highlighted in white. 8. When s get out of backup menu, the following message will be shown up to alert.

58




3. USB CD/DVD –RW Backup z

You must stop all recording before performing backup to CD/DVD RW.

１. Plug in USB connector into the USB connection port on the front . ２. Press [BACKUP] button to display the backup menu.

z

For USB CD/DVD-RW back up, the select option is not available. The data will be backed up to USB CD/DVD-RW of All cameras and normal, alarm, motion recording together.

1. Use [-, +] button to change select device: USB – CD/DVD-RW 2. Enter the numbers as required in 24-hour format, then move to

.

3. Press [ENTER] button to start BACKUP. * USB icon will be highlighted in blue during the backup. • If there is not enough space on your USB memory stick, the system will not proceed with backup.

USB Memory Stick z

The backup progress indicator will be displayed at the bottom of the window. While the system is in backup session, please do not perform playback.

4. After backup process is finished, USB icon will be highlighted in white.

59




4. How to Play Backup data in USB Memory Stick Backup 1. With “MCD Player” - Plug a USB memory stick into your PC. No software installation is required. 2. Double Click on “MCD Player” in the window and will play as follows.

Channel Select

Display Select

Watermark

Stop

Capture Playback

Play

3. Back up data can be also be played by [LOCAL PLAYER]

60




5. Back up Range Setup It is possible to set up backup range automatically on Time Search Menu[by Month, Date, Hour, Minute] Press [-] button to set backup Start time , press [+] button to set End. Selected time will be changed [Light Grey] Color.

Selected backup time from 15:15~15:20 will be displayed on Backup range.

61




Appendix 1: WEB SERVER Enter the IP address of the unit in the address page of the Internet Explorer. For example, type in http://192.168.10.104:1000 Above illustrates example of a unit when it is utilizing port 1000.

You can either sign in with: or .

Next

enter the for the unit.

Click on Web Server to connect to the DVR through IE browser

62




63




Appendix 2 : SPECIFICATION Specifications

4CH / 8CH / 16Ch

Video Input

4, 8, 16

Video Output

Composite, VGA, SPOT-OUT

Video Compression

H.264

Audio Compression

G.711

Live Display Resolution Alarm In/Out(Relay)

NTSC 720*480, PAL 720*576 4/1, 8/1, 16/1

Operating System

EMBEDDED LINUX

System Control

Key buttons, IR Remote Controller, Remote software(DVR Player), Mouse

Live Display Speed

Real Time

Maximum

NTSC

60(30) fps 720 x 480, 120(60) fps 720 x 240, 240(120) fps 360 x 240

8/16CH (4CH)

PAL

50(25) fps 720 x 576, 100(50) fps 720 x 288, 200(100) fps 360 x 288

Audio Record(in/out)

1 IN, 1 Out

Features Display

Brightness, Contrast, Color Adjustment Per Channel

Camera Title

12 Characters per Channel

Recording Mode

Continuous, Schedule, Alarm, Motion

Recording Method

5 Levels of Compression Rate / Record Frame Rate Adjustment

Recording Adjustments Motion Detection Search Mode Playback Modes Multi-tasking

Pre-Alarm: 3 sec/ Post-Alarm: 10 sec. ~300 sec. Per Channel 4*4 Grids (SET)/ 28 x 24 (CLIENT)/ 20 Sensitivity Levels Date & Time, Camera , Log search Forward & Reverse: Pause, Frame by Frame, Normal Speed, 2X, 4X, 8X, 16X Simultaneous Live Display/ Playback, Record or Back-up, Remote Transmission

Watchdog

Power Failure Recovery: Auto Reboot / Maintaining Previous Record Settings

Watermark

Provided

Back Up

USB Flash Memory Stick, External HDD and External CD/DVD-RW

Interface

RS422/485, Ethernet(10/100 Base-T), USB 2.0

HDD

1 INTERNAL HDD

Network

LAN, WAN, Internet,

Remote

Client Software, Internet Explorer

64




WEEE Symbol Information Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates, that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household s should either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business s should their supplier and check the and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

65




<Memo>

66



Pinetron Xm3 Dvr Manual 5d5x43

Overview 5o1f4z

More details 6z3438

Related Documents c2h70

Pinetron Xm3 Dvr Manual 5d5x43

Pinetron Xm3 Dvr Manual.pdf gi2v

Manual Pinetron Ahd 5a5c5a

Manual Dvr 6k5s1t

Manual Fuentes Alpha Xm3.pdf 536gy

Manual Dvr Stilus i473n

More Documents from "Soporte Nacho" 312p16

Pinetron Xm3 Dvr Manual 5d5x43

Gs Affinity Guide 455q5u

Piano Score Pastoral 235u62

113450958-c290-manual-de-termoking.pdf 6d2yp

6g3p1u

Pensamientos Alegres 251r6g