Philips Rola Storage Systems Catalogue 5w3h5v

PRODUCT GUIDE EDITION 2

Introduction The ultimate in vehicle and mobile storage systems. ROLA•CASE‘s purpose built manufacturing

Our service offers a full install, including drawer systems,

facility at Somersby NSW, incorporates a

shelving, cabinets, cargo barriers roof racks (commercial &

comprehensive showroom, install service, and

sports), flooring, steps, tow bars etc. plus custom build where

computer aided design and manufacturing

required.

capabilities. Combined with experienced staff

These systems provide the ultimate solution in storage for

that understand and recognize today’s vehicle

tradesmen, technicians and service requirements. Suitable for

storage needs.

all enclosed vehicles.

Designed and manufacturered in Australia by Thomas Moloney Pty Ltd, 27 Kangoo Road, Somersby NSW 2250 Phone: +61 2 4340 1444 1300 650 719 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com

Vehicle storage systems for efficiency- conscious trades 1539mm

4 1

2

2

9

9

10

10

3

3

16

6 17 21

cut at 25mm intervals

11

7

14

12

18

19

tube width 25mm

15 8 25mm

13 22

420mm

420mm

20 420mm 840mm 840mm

1

RSSFR/40

4 Series start frame

17

RSSHL/84

Mid mount shelf with 2x RP120 plastic bins

2

3

RSEFR/40

4 Series extension frame

18

RSLBX/82

RSSFR/80

8 Series extension frame

Lockable box mounted horizontally in 8 Series or vertically in 4 Series frames.

4

RSRM/1

Roof mount shelf

19

RCDK 3-2

Rola Case kit with RSBAR bar

RSFLE/81

Floor enclosure with removable front angle (buckets not included)

5

RSEFR/HD/120

12 Series Heavy Duty extension frame

20

6

RSGAC/41

Vented gas cabinet, small & flammable store

21

RSCAB/81

Large 3 shelf cabinet with space-saving contoured body

22

RSSHL/86

Floor mount shelf with 2x RP240 plastic bins (plastic dividers not included) Mid mount shelf with 8x RP100 plastic bins

7

RCSK6/C

Rola Case cabinet kit (case selection on page 13)

8

RSFLE/40

Floor enclosure with removable front angle

9

RSSHL/43

High mount shelf with three RP25 plastic bins

23

RSSHL/85

High - Mid mount shelf with 1x RP120 plastic bin

24

RCDK 5-4/C

Rola Case kit with 2x RC5D doors

RSSHL/87

Mid-mount shelf with 2x Rola Cases

10

RSSHL/44

11

RSSHL/45

Mid mount shelf with 4x RP100 plastic bins

25

12

RSSHL/46

Low mount shelf with 2x plastic bins

26

RSCDH/81

Adjustable cable drum holder (cable drums not included)

RSSHL/123

High mount shelf with 9x RP25 plastic bins Mid mount shelf with 3x RP120 plastic bins

13

RSGBH/41

Gas bottle holder (gas bottles not included)

27

14

RSLBX/81

Lockable box mounted vertically in 4 Series or horizontally in 8 Series frames.

28

RSSHL/124

29

RSSHL/125

Mid mount shelf with 12x RP100 plastic bins

30

RSSHL/126

Floor mount shelf with 3x RP240 plastic bins (plastic dividers not included)

15

RSCDH/41

Adjustable cable drum holder

16

RSSHL/83

High mount shelf with 6x RP25 plastic bins

Note: the display above doesn't include all products featured in this catalogue and is for illustration purposes only. The heights and component arrangements are adjustable for varying vehicles types and customer requirements. Check the catalogue for your other specific storage needs. Disclaimer: If any product is installed incorrectly or used in an incorrect manner, no liability will be taken for product malfunction or personal injury.

1

Designed and manufacturered in Australia by Thomas Moloney Pty Ltd, 27 Kangoo Road, Somersby NSW 2250 Phone: +61 2 4340 1444 1300 650 719 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com

and service businesses 3

5

16 27

23 28

24

29

29

30 25

30

26

tube width 25mm

840mm 1260mm

25mm

The configuration of shelves and plastic bins depicted above allows for storage of large, medium and small components typical of today’s tradesman and technician’s requirements. ROLA•Shelf will fit all modern vehicles where shelving is required; commercial vans, canopy enclosures, 4WDs and station wagons.

ROLA•CASE - Cabinet storage options

w w w . r o l a c a s e . c o m

2

ROLA•Shelf consists of 3 types - the 12, 8 and 4 Series and the choice of 5 shelves, cabinets, lockable boxes, cable drum holders etc. The 12 and 8 Series are the standard with the 4 Series fitting where insufficient space exists for a 12 or 8 Series. The 8 and 4 Series also house the ROLA•CASE Storage system. The shelving consists of high, mid, low and floor mount shelves. These shelves will allow for a selection to fit all modern trades and technician vehicles. As the three sizes of frames are all compatible, you can add on to and build the shelving system as your demands require. All ROLA•Shelf products are supplied with the necessary fixing components and comprehensive instructions for DIY assembly and installation. (However, we do recommend installation to be done by an approved dealer who offers an installation service.) Modern mid and high roof vehicles will accept 6 - 7 shelves either in single or dual post frames at 1539mm per 12, 8 and 4 Series frame. For standard height vehicles check kits on page 10 and 11.

Heavy Duty Workbench. Available in 12 and 8 Series frames.

See page 7 for end s and accessories

RCTRY Micro Storage ROLA•CASE is designed to give s the maximum in space saving capabilities with a variety of compartment sizes. Optional extras like this small tray insert with adjustable compartments allow storage of the smallest micro components.

ROLA•CASE Metal Bearings available x4 per drawer for heavy duty wear-and-tear and loading. See page 18 for further info.

ROLA•CASE storage systems offer a range of storage options including a number of different trolley units.

w w w . r o l a c a s e . c o m

3

12 Series 1539mm

12 Series extension frame. Construction as per RSSFR/120. All components zinc annealed and powder coated, complete with instructions and mounting hardware.

825mm

12 Series start frame. Construction: - Vertical post 25 x 25 x 1.6 mm sq. tube. Cut at 25mm intervals for varying vehicle height to 825mm. - Horizontal 25 x 18 x 3mm angle. - All components zinc annealed & powder coated, complete with instructions and mounting hardware.

12 Series Heavy Duty framing available. See page 7.

1310mm

RSSHL/123

RP25

High mount shelf. Height: rear 90mm / front 45mm. Length: 1259mm. Width: 230mm. Holds 9x RP25 bins.

Medium plastic bin. 220 x 130 x 125mm 1 compartment

RSSHL/125

RP100

Low mount shelf. Height: rear 90mm / front 45mm. Length: 1259mm. Width: 305mm. Holds 12x RP100 bins.

Small plastic bin. 300 x 100 x 100mm. 3 compartments

RSSHL/127

1539mm

RSEFR/120

825mm

RSSFR/120

1285mm

RSSHL/124

Mid mount shelf. Height: rear 90mm / front 45mm. Length: 1259mm. Width: 255mm. Holds 3x RP120 bins. RSSHL/126

Floor mount shelf. Height: rear 168mm / front 80mm. Length: 1259mm. Width: 405mm. Holds 3x RP240 bins.

All products below zinc annealed, powder coated and or galvanized. Metal Gauge 0.9 to 1.9mm.

RP120

Large plastic bin. 410 x 270 x 160mm. 3 compartments

RP240

Extra large plastic bin. 410 x 440 x 215mm. 1 compartment

RSLBX/121 RC001

Lockable box for 12 Series shelving. Box and shelving construction: 0.9 and 1.1mm zinc annealed and powder coated. Width: 1259mm. Depth: 400mm. Height: 419mm.

Mid mount shelf. Height: rear 90mm / front 25mm. Length: 1259mm. Width 377mm. Holds 3x RC001 Rola Cases. Optional vertical mounting in 4 Series frame. See page 15 for case details RSWB/120

RSLBX/122 Lockable box for 12 Series shelving. Box construction: 0.9 and 1.1mm zinc annealed and powder coated. Width: 1259mm. Depth: 400mm. Height: 419mm.

Mid mount work bench. 1.9mm galvanized steel. Width 1259mm, Depth 400mm, Height at back 55mm.

Optional vertical mounting in 4 Series frame.

4

Designed and manufacturered in Australia by Thomas Moloney Pty Ltd, 27 Kangoo Road, Somersby NSW 2250 Phone: +61 2 4340 1444 1300 650 719 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com

8 Series 1539mm

8 series extension frame. Construction as per RSSFR/80. All components zinc annealed and powder coated, complete with instructions and mounting hardware.

825mm

8 series start frame. Construction: - vertical post 25 x 25 x 1.6 mm sq. tube. Cut at 25 mm intervals for varying vehicle height to 825 mm. - Horizontal 25 x 18 x 3mm angle. - All components zinc annealed & powder coated, complete with instructions and mounting hardware.

8 Series Heavy Duty framing available. See page 7.

890mm

RSSHL/83

High mount shelf. Height: rear 90mm / front 25mm. Length: 839mm. Width: 200mm. Holds 6x RP25 bins RSSHL/86

Floor mount shelf. Height: rear 168mm / front 80mm. Length: 839mm. Width: 405mm. Holds 2x RP240 bins.

RP25

Medium plastic bin. 220 x 130 x 125mm 1 compartment

RP240

Extra large plastic bin. 410 x 440 x 215mm. 1 compartment

All products below zinc annealed, powder coated and or galvanized. Metal Gauge 0.9 to 1.9mm.

865mm

RSSHL/84

Mid mount shelf. Height: rear 90mm / front 25mm. Length: 839mm. Width: 240mm. Holds 2x RP120 bins.

1539mm

RSEFR/80

825mm

RSSFR/80

RP120

Large plastic bin. 410 x 270 x 160mm. 3 compartments

RSSHL/87

Low mount shelf. Height: rear 90mm / front 25mm. Length: 839mm. Width 377mm. Holds 2x RC001 Rola Cases.

RC001

See page 15 for case info.

RSSHL/85

Low mount shelf. Height: rear 90mm / front 45mm. Length: 839mm. Width: 305mm. Holds 8x RP100 bins.

RP100

Small plastic bin. 300 x 100 x 100mm. 3 compartments

RSCDH/81

Adjustable diameter cable drum holder for 8 Series shelving. Dimensions: Width 839mm. Depth 370mm. Height 170mm

RSLBX/81

RSLBX/82

Lockable box for 8 series shelving. Dimensions: Width 839mm, Depth 400mm, Height 419mm. Holds 10 x RP100 bins. Optional vertical mounting in 4 series frame

Lockable box for 8 series shelving. Dimensions: Width 839mm, Depth 400mm, Height 419mm. Optional vertical mounting in 4 series frame

RSFLE/80

RSWB/80

RSCAB/81

FIXED SHELF

FIXED SHELF

FIXED SHELF

Large Lockable Cabinet with 3 fixed shelves. Designed to fit above wheel arch and contoured for vehicle. Dimensions: Width: 839mm, Depth: 460mm, Height 905mm

Floor mount enclosure with removable front angle & strap. Ideal for large bucket. Dimensions: Width 839mm, Depth 300mm, Height 275mm.

Mid mount work bench. 1.9mm galvanized steel. Dimensions: Width 839mm, Depth 400mm, Height at back 55mm.

w w w . r o l a c a s e . c o m

5

4 Series 4 Series Extension Frame. Construction as per RSSFR/40. All components zinc annealed & powder coated, complete with instructions and mounting hardware.

825mm

1539mm

4 Series Start Frame. Construction: - vertical post 25 x 25 x 1.6 mm sq. tube. Cut at 25 mm intervals for varying vehicle height to 825 mm. - Horizontal 25 x 18 x 3mm angle. - All components zinc annealed & powder coated, complete with instructions & mounting hardware.

825mm

RSEFR/40

RSSHL/44 RP25

High mount shelf. Height: rear 90mm / front 25mm. Length: 419mm. Width: 200mm. Holds 3x RP25 bins

Medium plastic bin. 220 x 130 x 125mm 1 compartment

RSSHL/46

RSSHL/45 RP120

Mid mount shelf. Height: rear 90mm / front 25mm. Length: 419mm. Width: 240mm. Holds 1x RP120 bins.

Large plastic bin. 410 x 270 x 160mm 3 compartments

RSGBH/41

RP100

Low mount shelf. Height: rear 90mm / front 45mm. Length: 419mm. Width: 305mm. Holds 4x RP100 bins

Plinth or 4 series mounted, small gas bottle or dangerous goods store. Includes exterior venting, rubber inserts, adjustable straps for securing varying size containers. Width 419mm Depth 310mm Height 445mm

Extra large plastic bin. 410 x 440 x 215mm. 1 compartment

RSFLE/40

Gas bottle holder for oxy acetylene or small bottles. Includes rubber mat and strap. Dimensions: Width 419mm, Depth 230mm, Height 420mm. RSGBH/42

RSCDH/41

6

RSGAC/42 Plinth or 4 series mounted gas cabinet. Ideal for oxy. acetylene or D size bottles. Includes exterior venting, rubber inserts, adjustable securing strap & hose coil holder. Width 419mm Depth 310mm Height 925mm

Floor mount enclosure with removable front angle & strap. Dimensions: Width 419mm, Depth 300mm, Height 240mm.

Adjustable diameter cable drum holder for 4 Series shelving. Dimensions: Width 419mm. Depth 370mm. Height 170mm

Small plastic bin. 300 x 100 x 100mm 3 compartments

RSGAC/41

RP240

Floor mount shelf. Height: rear 168mm/ front 80mm. Length: 419mm. Width: 405mm. Holds 3x RP25 bins

All products below zinc annealed, powder coated and or galvanized. Metal Gauge 0.9 to 1.5mm.

445mm

470mm

RSSHL/43

1539mm

RSSFR/40

Gas bottle holder adjustable for gas bottles up to 350mm diameter. Includes rubber mat and strap. Dimensions: Width 419mm, Depth 230mm, Height 420mm.

Designed and manufacturered in Australia by Thomas Moloney Pty Ltd, 27 Kangoo Road, Somersby NSW 2250 Phone: +61 2 4340 1444 1300 650 719 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com

Heavy Duty Frames Heavy Duty Framing

cut at 25mm intervals

1593mm

The ROLA•Shelf Heavy Duty Frames have been constructed for those who require a more rugged and durable shelving system to meet their storage needs. This Heavy Duty system is available for both the 12 and 8 Series shelving and offers improved and strength.

RSSFR/HD/120 12 Series Heavy Duty Start Frame. Width: 1310mm

RSEFR/HD/120 12 Series Heavy Duty Extension Frame. Width: 1285mm

RSSFR/HD/80 8 Series Heavy Duty Start Frame. Width: 890mm

RSEFR/HD/80 8 Series Heavy Duty Extension Frame. Width: 865mm

Construction: Vertical posts 25 x 25 x 1.6mm sq. tubes cut at 25mm intervals for varying vehicle heights. Other framing components from 3mm galvanized or powder coated steel. Heavy duty frames are supplied with all necessary fixing components and comprehensive instructions for DIY assembly. (However, we do recommend installation to be done by an approved dealer who offers an installation service.)

End s and accessories RSPEP/L

The ROLA•Shelf range of perforated end s and accessories further improves your space saving and storage capabilities. The ROLA•Shelf End s can be fitted to either end of the 12, 8 or 4 Series shelving units and can be customized with the accessories in any arrangement as required by the . All accessories are zinc sealed and powder coated.

1025mm

RSPEP/HK

Lead Hook - Holds extension leads, hoses, etc.

RSPEP/TY

RSPEP/MH

Tool Rack - holds tools of different shapes and sizes.

RSPEP/WBH

RSPEP/FE Small Fire Extinguisher with housing compatible with End s.

RSPEP/TAP

180mm

RSPEP/EX

End . Construction: 1.1mm zinc coated steel Height 1020mm, Width 460mm. All fixing components included. RSPEP/EX

Tool Tray – holds loose tools and / or equipment. 460mm

RSPEP/R

Water Bottle Holder – comes with 10L Jerry Can.

Extendable tap – For quick clean up / rinsing. To be fitted anywhere below Water Bottle Holder via flexible hose.

w w w . r o l a c a s e . c o m

End Extension. Add universal extension to fit vehicle height / application. Construction: 1.1mm Zinc coated steel Height 180mm, Width 460mm.

7

Specialist products RS/RS

RSBAR

Mounting bar for ROLA•CASE Dual Frames and Dual Kits to fit within 8 series frames. RSBAR/12 To 12 series shelves where additional loading may occur. (Excessive loading may result in product failure and will void product warranty - consult a dealer / manufacturer)

Galvanized Rear Step. Illustration depicts Toyota Hi-Ace step (other vehicle types available). RSRM/1 RSJCH/2

Roof Mount Shelf with felt inlay, foam end inserts and Velcro straps. Construction: 1.1mm zinc sealed and powder coated. Width 200mm, Length 1820mm, Height 60mm. To fit above ROLA•Shelf frame.

Double Jerry Can Holder Dimensions: Width 360mm Depth 385mm Height 390mm

RSRM/2

Roof Mount Shelf with Velcro straps for long levels, rulers, etc. Construction: 1.1mm zinc sealed and powder coated. Width 200mm, Length 1820mm, Height 60mm. To fit above ROLA•Shelf frame.

RSJCH/3

Triple Jerry Can Holder Dimensions: Width 540mm Depth 385mm Height 390mm

RSGBH/9KG 9kg Gas Bottle Holder. Comes with vibration insert, rubber pinch-weld and strap. Floor mount. Dimensions: Width 375mm Depth 335mm Height 295mm

INSTALLATION KIT/PACKAGING All products are packaged and supplied complete with comprehensive do it yourself (d.i.y.) instructions, or ask your local distributor for a complete install service.

8

RSCAB/RS Floor mount lockable cabinet with rolling shutter door - will also fit 8 Series ROLA•Shelf frame. Provides a higher level of security for cargo/goods. Contoured to fit vehicle. Dimensions: Width 839mm Depth 475mm Height 1240mm

Designed and manufacturered in Australia by Thomas Moloney Pty Ltd, 27 Kangoo Road, Somersby NSW 2250 Phone: +61 2 4340 1444 1300 650 719 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com

Specialist products ROLA•Shelf ANCHORAGE REINFORCEMENT 1

2

3

4

RSVICE Separate vice with 100mm jaw.

1. RSRB/CR1 Cant rail reinforcement angle for a Toyota Hi-Ace. 2. RSRB/VB Vibration bracket reinforcement. 3. RSRB/CR2 Universal cant rail reinforcement bracket. 4. RSIB Horizontal inertia bracket.

COMBINATION LOCK

Optional combination lock available for all cabinets. Simple and quick operation tamper proof.

RSSLDV Sliding vice assembly with 800mm travel.

CARGO BARRIERS Our complete range of cargo barriers and security screens for commercial and enger vehicles offers further solutions for today’s traveling tradesmen and technicians. The range includes end barriers which are able to integrate with the ROLA•Shelf range, a cargo barrier and also security screens for property protection within the vehicle. The end barriers below are able to integrate with the ROLA•Shelf range of frames.

RSFTH/1 Full Cargo Barrier RSEB/3

End Barrier. 3/4 height to fit end of ROLA•Shelf frame.

End Barrier Able to fasten oxy acetylene or similar sized bottles. To fit end of ROLA•Shelf frame.

End Barrier Comes with strap to hold step ladders etc. and is reversible for both sides of vehicle. To fit end of ROLA•Shelf frame.

375mm

375mm

RSWSC/TRW

Security Screen for added property protection. To fit the rear window of a Toyota Hi-Ace Van. Other vehicle types available.

1140mm

RSEB/2

1140mm

RSEB/1

845mm

Vertical Fluorescent Tube Holder. Holds all standard tubes up to 36W. Comes complete with Velcro security straps and foam cushion. Dimensions: Width 160mm Depth 160mm Height 1250mm

375mm

RSWSC/TSD

Security Screen for added property protection. To fit the side window of a Toyota Hi-Ace Van. Other vehicle types available.

w w w . r o l a c a s e . c o m

9

Kits The complete answer to vehicle shelving The ROLA•Shelf RSKIT range of preconfigured vehicle shelving kits offer an indicative variety of storage choices and budgets for plumbers, electricians and service technicians to suit most modern vehicle types.

vehicle storage requirements and will be able to offer a range of Cabinets, Shelves and Drawer Systems that will precisely meet your vehicle storage needs and ensure you are full equipped to service your customers.

Our trained sales team and nationally appointed distributors will interpret your

All of the RSKIT range of shelving will fit within most late model vehicles e.g. the RSKIT/2

1250mm

1250mm

RSKIT/1

Toyota Hi-Ace and alike vehicles. Alternatively, a ROLA•Shelf kit can be customized to fit your vehicle or application. - Ask your local dealer for further info.

2175mm

m 1755m

To fit Toyota Hi-Ace or similar height vehicles RSKIT/4

1250mm

1250mm

RSKIT/3

2175mm

1755mm

10

Designed and manufacturered in Australia by Thomas Moloney Pty Ltd, 27 Kangoo Road, Somersby NSW 2250 Phone: +61 2 4340 1444 1300 650 719 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com

Kits Included in our service are heavy duty roof racks, cargo barriers, oil & acid resistant rubber and timber flooring, plus a host of vehicle accessories needed for today’s service vehicles. RSKIT/6

RSKIT/7

890mm

1250mm

1250mm

1250mm

RSKIT/5

890mm

890mm

To fit Toyota Hi-Ace or similar height vehicles RSKIT/10

1250mm

RSKIT/9

1250mm

1250mm

RSKIT/8

890mm

890mm

w w w . r o l a c a s e . c o m

470mm

11

Kits Case solved ROLA•CASE offers an easy selection of kits to suit your storage needs and are suitable for individual use, or can be added vertically or horizontally at any time as your storage requirements demand.

ROLA•CASE will integrate with the ROLA•Shelf units for further optional applications. With the RCSK kits fitting the 4 Series ROLA•Shelf And the RCDK kits fitting the 8 Series ROLA•Shelf

RCSK2

RCSK3

RCSK4

RCSK5

RCSK6

RCSK7

RCDK2

RCDK3

RCDK3/2

RCDK4

RCDK5

RC7KM

RCDK3/4

12

RCDK5/4

RCDKM/EN

Designed and manufacturered in Australia by Thomas Moloney Pty Ltd, 27 Kangoo Road, Somersby NSW 2250 Phone: +61 2 4340 1444 1300 650 719 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com

Kits Case closed

RCSK1/C

RCSK2/C

Our ROLA•CASE cabinet kits offer an alternative to your ROLA•CASE storage needs. These cabinet kits are able to be fitted with lockable doors and shelves and can be ed vertically and / or horizontally to create nearly any modular configuration (an example of this unit is on page 2).

RCSK3/C

RCSK4/C

RCSK5/C

RCSK6/C

RCSK7/C

RCSK7PN/C

RCSK7M/C

RCDK2/C

RCDK3/C

RCDK4/C

RCDK5/C

RCDK3-2/C

RCDK3-4/C

RCDK5-4/C

RCDK7M/C

Note: Doors are also available for the cabinet kits – See page 18 for further info. (Supplied as depicted – no doors are included with kits. Order separately). Cabinet systems (shown left) are also available. All cabinets fit 4 and 8 Series ROLA•Shelf . All kits vertically and horizontally.

w w w . r o l a c a s e . c o m

13

Find Your Solution, Case by Case. ROLA•CASE is a versatile storage system for the transfer and handling of components, tools and instruments. The range includes Mobile Work Stations that allow the movement of tools and equipment in a workshop or service area, plus the Drawer systems which are ideal for vehicle and static use. The Drawer systems are also compatible with the ROLA•Shelf vehicle storage system. The Mobile Work Stations are available in 3 choices. The dual mobile RC7DC/DM, and the single mobile

14

RC7DC/SM, which are both suitable for continuous floor use, and the RC7DC/PN with pneumatic tires. The RC7DC/PN is suitable for stairs and uneven terrain like building sites, high rise and situations where distance and mobility are a factor. The Drawer systems offer an extensive selection of storage solutions that allows further expansion horizontally and or vertically when your storage needs arise. The choice of cases and accessories will allow for storage of the smallest micro

components through to power tools and cordless equipment. A selection of Drawer kits to meet your storage needs is on page 12 and 13, or custom build from our Drawer systems on page 16 and 17. The cases are manufactured from engineering polymers, ABS, Polycarbonate and Nylon 66. They are molded with a 3 – 5mm wall section and use stainless steel for the hinge and latchspring to ensure extended product life.

Designed and manufacturered in Australia by Thomas Moloney Pty Ltd, 27 Kangoo Road, Somersby NSW 2250 Phone: +61 2 4340 1444 1300 650 719 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com

Products RC001

RC001/CL

RC002

20 adjustable compartments, 1 tool compartment in front of case. Dimensions: Width 370mm, Depth 370mm, Height 85mm

20 adjustable compartments, 1 tool compartment in front of case. Polycarbonate lid. Dimensions: Width 370mm, Depth 370mm, Height 85mm

1 large compartment (will take RCFIS/2), 1 tool compartment in front of case. Dimensions: Width 370mm, Depth 370mm, Height 85mm

RC002/CL

RC003

RC003/CL

1 large compartment (will take RCFIS/2), 1 tool compartment in front of case. Polycarbonate lid. Dimensions: Width 370mm, Depth 370mm, Height 85mm

1 large tool compartment, plus 3 compartment lift-out tray and with further compartments below, with capability to be divided by 4 with divider RC003/D (will take RCFIS/3). Dimensions: Width 370mm, Depth 370mm, Height 130mm

1 large tool compartment, plus 3 compartment lift-out tray and with further compartments below, with capability to be divided by 4 with divider RC003/D. Polycarbonate lid (will take RCFIS/3). Dimensions: Width 370mm, Depth 370mm, Height 130mm

RC003/QK

QK001

1 large compartment, plus 3 compartment lift-out tray and with further compartments below, 1 tool compartment. Includes Quik Kit (QK001) Dimensions: Width 370mm, Depth 370mm, Height 130mm

10 small compartments, 1 large tool compartment in front of case. Also available in clear QK001/CL Dimensions: Width 310mm, Depth 210mm, Height 50mm

RC003/D

RCFIS/2 and RCFIS/3

QK001/CL

RCTRY

Small tray with 4 adjustable compartments. Suits RC001 series cases. Includes new clear micro component storage unit. 2 per carton. Dimensions: Width 70mm, Length 143mm, Height 75mm.

SPARE PARTS

Dividers to suit RC003 cases. Each case holds max. 3 dividers.

Foam insert. RCFIS/2 to fit RC002 Series cases. RCFIS/3 to fit RC003 Series cases.

RCBKE/2

RCBKE/3 Holds 2 x RC003 cases. Includes rubber mat and strap.

Holds 3 x RC001 cases. Includes rubber mat and strap.

Dimensions: Width 380mm Depth 290mm Height 290mm

Dimensions: Width 380mm Depth 290mm Height 290mm

RCJNR

RLD

s drawer vertically. (Set of 4).

Divider for RC001 cases

RCVCH

Vertical Case Holder. Holds RC001, RC002 or RC003 series cases. Ideal for wall or end mounting. Height 150mm, Width 370mm.

w w w . r o l a c a s e . c o m

15

Products Drawer Systems RC2FR

RC3FR Holds 3 x RC001 or RC002 series cases. Dimensions: Width 419mm, Depth 460mm, Height 350mm

Holds 2 x RC003 series cases. Dimensions: Width 419mm, Depth 460mm, Height 350mm

RC2FX Horizontal extension frame also available

RC3FX Horizontal extension frame also available

RC3FX/2D Horizontal extension frame also available

RC4FR

RC4FR/3D Holds 2 x RC003 and 1 x RC001 series case. Dimensions: Width 419mm, Depth 460mm, Height 460mm

Holds 5x RC001 or RC002 series cases. Dimensions: Width 419mm, Depth 460mm, Height 571mm

RC4FX Horizontal extension frame also available

RC4FX/3D Horizontal extension frame also available.

RC5FX Horizontal extension frame also available

RC7MB Holds 2 x RC001 or RC002 and 2 x RC003 series cases. Dimensions: Width 419mm, Depth 460mm, Height 571mm RC5FX/4D Horizontal extension frame also available

RCWCT

RC5FR

Holds 4 x RC001 or RC002 series cases. Dimensions: Width 419mm, Depth 460mm, Height 460mm

RC5FR/4D

RC7DM/EN Holds 7 x RC001 or RC002 cases or combination of RC001 & RC003 cases. Dimensions: Width 419mm, Depth 460mm, Height 875mm

RCWCT/DT

Work top for single frames. Comes complete with double sided tape and fixing screws. Dimensions: Width 419mm, Depth 445mm, Thickness 1.1mm

16

RC3FR/2D

Holds 2 x RC001 or RC002 series cases. Dimensions: Width 419mm, Depth 460mm, Height 250mm

Work top for dual frames. Comes complete with double sided tape and fixing screws. Dimensions: Width 825mm, Depth 455, Height 8mm, Thickness 1.1mm

Holds up to 14 x RC001 or RC002 series cases or a combination of RC001, RC002 & RC003 series cases. Dimensions: Width 830mm, Depth 460mm, Height 960mm (total).

Designed and manufacturered in Australia by Thomas Moloney Pty Ltd, 27 Kangoo Road, Somersby NSW 2250 Phone: +61 2 4340 1444 1300 650 719 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com

Products Drawer Cabinets RC2DC

RC3DC

RC3DC/2D

Holds 2 x RC001 or RC002 series cases. Dimensions: Width 419mm, Depth 460mm, Height 230mm.

Holds 3 x RC001 or RC002 series cases. Dimensions: Width 419mm, Depth 460mm, Height 325mm.

Holds 2 x RC003 series cases. Dimensions: Width 419mm, Depth 460mm, Height 325mm.

RC2 - cabinet only RC2D - door only

RC3 - cabinet only RC3D - door only

RC3 - cabinet only RC3D - door only

RC4DC

RC4DC/3D Holds 4 x RC001 or RC002 series cases. Dimensions: Width 419mm, Depth 460mm, Height 420mm. RC4 - cabinet only RC4D - door only

RC5DC/4D

RC5DC Holds 2 x RC003 and 1 x RC001 series case. Dimensions: Width 419mm, Depth 460mm, Height 420mm.

Holds 5 x RC001 or RC002 series cases. Dimensions: Width 419mm, Depth 460mm, Height 547mm. RC5 - cabinet only RC5D - door only

RC4 - cabinet only RC4D - door only RC7DC/PN

Holds 2 x RC001 or RC002 and 2 x RC003 series cases. Dimensions: Width 419mm, Depth 460mm, Height 547mm.

RC7DC/SM Trolley with 220mm pneumatic tires. Ideal for stairs or uneven surfaces. Holds 7 x RC001 or RC002 cases or a combination of RC001 and RC003 cases. Dimensions: Width 419mm, Depth 540mm, Height 1000mm (total)

RC5 - cabinet only RC5D - door only

Holds 7 x RC001 or RC002 cases or a combination of RC001, RC002 and RC003 cases. Dimensions: Width 419mm, Depth 540mm, Height 1000mm (total). RC7 - cabinet only RC7D - door only

RC7 - cabinet only RC7D - door only RC7DC/DM

RCCIT Holds up to 14 x RC001 or RC002 cases, or a combination of RC001 and RC003 cases. Dimensions: Width 839mm, Depth 460mm, Height 960mm (total) (Shelf not included) RC7D x 2 - door only

Nylon fiber insert to fit top of all Drawer Cabinets. Oil, Petrol and water resistant. Width 410mm, Depth 455mm, Thickness 5mm

Cabinet construction: 0.9 to 1.1mm zinc annealed and powder coated steel.

w w w . r o l a c a s e . c o m

17

Products Drawer Cabinet ries RCWHL/PN

RCCS Shelf to fit ROLA•CASE cabinets. Shelf construction: 0.9mm zinc annealed and powder coated.

Pneumatic wheel kit for single modular mobile work station. Comes with 2 x 220mm pneumatic tires, 2x swivel locking wheels and all necessary bracing and fixing components. (Handles may be necessary.) RCHDLT

RCWHL/DM Wheel kit for a dual modular mobile work station. Comes with 2x fixed wheels and 2x swivel locking wheels and all necessary bracing and fixing components. (Handles may be necessary.)

Handle to fit dual and single mobile kits. RLH

CARRIAGE ACCESSORIES RCCRG/MG Carriage Set - Colour: Millenium grey

RCCRG/MG shown

ROLA•CASE cabinets are able to be fitted with a door for added security. Each door is 0.9mm zinc annealed and powder coated with a 3-point locking mechanism (except RC2D and RC3D). RC2D Door to fit: RC2DC RCSK1/C RC5D Door to fit: RC5DC RC5DC/4D RCSK4/C RCSK5/C RCDK4/C (x2) RCDK5/C (x2) RCDK5-4/C (x2)

RC3D Door to fit: RC3DC RC3DC/2D RCSK2/C RCSK3/C RCDK2/C (x2) RCDK3/C (x2)

Example purchase order: - RCDK5/MB-3 = RCDK5 with 3 heavy duty drawers. - RC7DC/PN/MB-7 = RC7DC/PN with 7 heavy duty drawers. - RCCRG/O/MB = Oyster carriage set with metal bearings

RC7D

RCCDT Work top to fit dual ROLA•CASE cabinets. Construction: 1.1mm zinc annealed and powder coated.

RC4D Door to fit: RC4DC RC4DC/3D RCSK6/C RCSK7/C RCDK3-4/C (x2)

18

Vertical ing bracket. For connecting ROLA•CASE cabinets vertically. 4 per kit plus screws.

CABINET DOORS

RCCRG/0 Carriage Set - Colour: Oyster MB - Catalogue No. Extension Carriage Set roller metal bearings (x4). Add to order per drawer where required.

Single mobile handle to fit pneumatic wheeled kits.

RCJNR/C Plinth Feet. To fix cabinets to floor of vehicle / stationary position. 4 per kit plus screws.

RCWHL/SM Wheel kit for a single modular mobile work station. Comes with 2x fixed wheels and 2x swivel locking wheels and all necessary bracing and fixing components. (Handles may be necessary.)

RCHDL

Door to fit: RC7DC/PN RC7DC/SM RC7DC/DM (x2) RCSK7PN/C RCSK7M/C RCDK7M/C(x2)

Designed and manufacturered in Australia by Thomas Moloney Pty Ltd, 27 Kangoo Road, Somersby NSW 2250 Phone: +61 2 4340 1444 1300 650 719 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com

Rola roof racks ROLA ROOF RACKS suit all commercial vehicles with accessories to secure all your loading needs including ladders, conduit, etc. From the regular roof racks to the luggage boxes; we will be able to assist in any problem where ROLA Roof Racks products are needed. The full range is featured in a comprehensive catalogue which includes commercial and sport type roof racks.

First aid kits First Aid Kits for vehicles and other workplaces. STATE

FIRST AID KIT NO. 1

FIRST AID KIT NO. 2

FIRST AID KIT NO. 3

REGULATIONS

NSW - B

•

For 1 to 24 employees at ‘Construction’ workplaces and 10 to 100 for ‘Other places of work’ (not vehicle / construction)

VIC

•

For workplaces with less than 25 people*

TAS

•

1 kit per hundred employees

QLD

•

For workplaces with less than 30 people (low risk)*

NT

•

For workplaces with less than 25 people*

SA

For workplaces with less than 50 people

•

WA Comcare B

CAT NO.

•

RCFAK1

For workplaces with less than 25 people Nation wide - For workplaces with more than 10 and less than 100 people (not high risk - OH&S Code of Practice 2008)

•

RCFAK2

RCFAK3

• Select for state regulations. * Workplace Risk & Hazard assessment requiried (Recommended for all). These first aid kits meet or exceed State or Territory prescribed regulations or Codes of Practice for Workplaces with less than 25 people (30 people for QLD, 100 people for TAS & 50 people for SA). For Large Workplaces, Remote Locations or High Risk workplaces additional 1st aid material or kits may be required. Each workplace should conduct a risk and hazard assessment and consult with their employees to properly assess their specific first aid and OHAS requirements.

w w w . r o l a c a s e . c o m

19

27 Kangoo Road, Somersby NSW 2250 Phone: +61 2 4340 1444 Fax: +61 2 4340 1400 Email: [email protected] Web: www.rolacase.com

Some of our current s: • Australian Antarctic Base • Australian Volunteer Coastguard • Cadbury Schweppes • Energy Australia • Lürsen Yachts/Ships - • Qantas - maintenance • Exported to Europe & New Zealand