Is:3764-code For Excavation Work 532e2f

इंटरनेट

मानक

Disclosure to Promote the Right To Information Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and ability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public. “जान1 का अ+धकार, जी1 का अ+धकार”

“प0रा1 को छोड न' 5 तरफ”

“The Right to Information, The Right to Live”

“Step Out From the Old to the New”

Mazdoor Kisan Shakti Sangathan

Jawaharlal Nehru

IS 3764 (1992): Code of safety for excavation work [CED 29: Construction Management including safety in Construction]

“!ान $ एक न' भारत का +नम-ण” Satyanarayan Gangaram Pitroda

“Invent a New India Using Knowledge”

“!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता ह” है” ह Bhartṛhari—Nītiśatakam

“Knowledge is such a treasure which cannot be stolen”

IS 3764 : 1992 ( Reaffirmed 2002 )

lndialz Stadnard EXCAVATION

WORK -

CODE OF SAFETY

( First Revision ) ,/’ / UDC

0

BUREAU MANAK

July

1992

OF BHAVAN,

,/

624’133 :.69’055 : 614’8

BIS 1992

INDIAN

STANDARDS

9 BAHADUR SHAH NEW DELHI 110002

ZAFAR

MARG

Price

Group

6

Safety in Construction

Sectional

Committee,

CED 45

FOREWORD This Indian Standard ( First Revision > was adopted by the Bureau of Indian Standards, draft finalized by the Safety in Construction Sectional Committee had been approved by Engineering Division Council.

after the the Civil

A large number of workmen, skilled and unskilled, al-e employed in the numerous construction works, big and small, under execution, in the country. Due to the increased tempo of such works It has, therefore, and large scale mechanisation, hazards of accidents have increased considerably. become imperative that adequate safety rules are laid down for every phase of work, and that these are meticulously followed. Excavation is one of the important phases of construction in any building activity. Due to insufficient attention to the safety aspects, it sometimes becomes a major hazard and cause of many serious accidents. Safety aspects in some of the constructions may assume such a great importance that instead of merely deputing supervisory staff in adequate strength to look after the safety aspects, it may become desirable to have a separate organization to control this important aspect. This standard has, therefore, been formulated to lay down such basic principles which take care of safety aspects involved in the hazardous operations involved in carrying out any excavation work. Adoptions of these measures would reduce the frequency of accidents considerably and bring confidence in the workmen who could work with greater efficiency. The safety precautions to be observed for working of machines and vehicles have not been specifically included in this standard. Since it is an important aspect for an overall safety, detailed instructions issued by the maker of the machinery and vehicles and the organization undertaking the work shall be strictly followed by the workers and a check shall be exercised by the supervisory staff. This standard incorporating this standard.

was first published in 1966. This revision has been taken up with a view the modifications found necessary as a result of experience gained with the use The important modifications carried out in this revision are :

4 Inclusion vermins

of protective and sndkes;

measures

b) Inclusion

of safety measures use of lifelines; and

4 Making some recommendations

required

against

while working

poisonous

regarding

plants

in soils infested

with insects,

and some recommendations

use of sheet piling in excavation.

to of

leeches,

regarding

IS 3764

: 1992

Indian Standard

OFSAFETY EXCAVATIONWORK-CODE (First Revision ) adjuncts to this standard:

1 SCOPE

Title

IS No. 1.1 This standard lays down the requirements for carrying out safely the excavation work, such as trenches, test pits, cellars, borrow pits, cuttings forrail, canal and road formations and all excavations on which the sides of excavations are not trimmed simultaneously to a stable slope. 1.2 The requirements laid down in this standard do not apply to the following:

a) Any part of a trench where the depth is less than 1.5 m;

b) cl

A trench into which no person is required to enter for any purpose: and Any part of a trench made for a pipeline or conduit if the trench is mechanically excavated, the sections of the pipeline or conduit are permanently assembled before being mechanically placed in the trench and the trench is mechanically back-filled.

3696 (Part 2) : 1991

Scaffolds and ladders - Code of safety : Part 2 Ladders ( first revision )

4081:

Safety code related drilling

for blasting operation

and

3 TERMINOLOGY 3.0 For the purpose of this standard, definitions shall apply ( see Fig. 1).

the following

3.1 Cleat A short member of shoring and timbering which directly resists the downward movement of strut or wale. 3.2 Sheathing The vertical of shoring and timbering which directly resist pressure from the side of a trench. 3.3 strut

2 REFERENCES 2.1 The following

Steel sheet piling revision )

1986

section

( first.

2314 : 1986

Indian

FIG.

Standards

are necessary

A transverse member of shoring and timbering which directly resists pressure from sheathing or wales.

1 ILL~~TRA~~E SKETCH SHOWING TIMBERINGIN LOOSE SOIL

IS 3764 : 1992 3.4 Trench

with the work without being properly instructed. They should preferably be under the close watch of a properly qualified and authorized person whose instructions shall be obeyed by these workers.

Any excavation in the ground where the depth of the

excavation exceeds the width. 3.5 Wale

4.2.3 In case any worker feels that he cannot perform a work safely, he shall immediately inform the foreman or supervisor of his inability to carry on with the work.

Alongitudinalmemberofshoringandtimberingwhich directly resists pressure from sheathing. 3.6 Sheet Piling

4.2.4 Safety helmets shall be worn by all persons entering trench where hazards from falling stones, timber or other materials exist.

A line of piles.driven in the soil to create a barrier or retaining wall. 4 GENERAL

RECOMMENDATIONS

4.1 Responsibilities

4.2.5 Appropriate safety footwear (rubber boots, protective covers, etc) shall be worn by workers/ employees who are engaged in work requiring such protection.

of Foremen and Supervisors

In all works, an experienced and competent foremanor supervisor shall be placed in charge of the work whose authority and responsibilities have been made clear to him and his subordinates. The foreman or supervisor shall be made responsible for the strict observance, of the safety rules. He shall have full authority to enforce the rules, guard against the use of defective safety appliances, rigging, tools and materials, to see that no man is permitted to do work for which he is not qualified, and to brief all workmen on the’plan of work before work is started with special emphasis on all potential hazards and on the ways to eliminate or guard against them.

5 SHORING AND TIMBERING 5.1 General 5.1.1 All trenches in soil more than 1.5 m deep shall be securely shored and timbered.

5.1.2 All trenches in friable or unstable rock exceeding 2 m in depth shall be securely shored and timbered. NOTES 1 The above requirements do not apply in cases where the sides ofthe trenchesaresloped to within 1.5 mofthebottom. Theslope that isprovided forsuch purposesshall be inspected and certified as stable by the persons in charge of work in all cases.

4.1.1 Sides of excavation shall be inspected by foreman or supervisor during the course of excavation from time to time and after every rain, storm or other hazard-increasing occurrence and protection against slides and cavings shall be increased, if necessary.

2 Notwithstanding anything said above, it shall be understood that the need for shoring is a matter which shall receive careful and frequent consideration even in trenches less than 1.5 m or 2 m in depth (as the case may be) and where there is any doubt as to the safety of the work without shoring, no further excavation or other work shall be continued until adequate shoring is provided.

4.1.2 Complete information on the underground structures (such as water pipelines, sewers, gas mains, electrical conduit system and other civic facilities) is essential before doing the excavation work. Proper precautions shall be taken to prevent accident to the workmen engaged in excavation work and calamities for the general public.

5.1.3 Where the sides of trenches are sloped as specified in 5.1.2 but not to within 1.5 m of the bottom, the vertical sides shall be shored and the shoring shall extend at least 30 cm above the vertical sides. When open spaced sheathing is used, a toe board shall be provided to prevent material rolling down the slope and falling into the part of the trench with vertical walls.

4.13 No excavation or earthwork below the level of any foundation of building or structure shall be commenced or continued unless adequate steps are taken to prevent danger to any person employed, from collapse of the structure or fall of any part thereof.

5.1.4 Shoring and timbering shall be carried along with the opening of a trench but when conditions permit, protection work, such as sheet piling may be done before the excavation commences.

4.1.4 Where medical facilities are not available nearby, first aid facilities like a first-aid kit shall be maintained at the site of work. This shall be kept at a conspicuous place in the charge of trained person(s). The kit shall be recouped periodically.

5.2 Composition

of Materials

5.2.1 Approved quality of sal wood shall be used for

4.2 Workers

shoring and timbering a trench. Any other structural material having strength not less than that of sal wood may also be used for the purpose.

4.2.1 Workers shall be instructed to use safety devices and appliances provided to them whenever it is necessary to do so.

5.3 Erection of Shoring and Timbering 4.2.2 Workers who are not aware of the hazards peculiar to the work shall not be permitted to proceed

Provisions detailed in 5.3.1 to 5.3.4 shall be followed 2

.

IS 3764 : 1992 5.4.2 Where a wedge is used inshoring and timbering of a trench, the thick end of the wedge shall be at least 50 mm wide.

while erecting different of shoring and timbering ( see Fig. 1). 5.3.1 Sheathing

5.5 Sheet piling

The sheathing shall be placed against the side of the trench so that length of each. piece of sheathing is vertical. The sheathing shall be held securely in place against the wales by ensuring that sheathing is kept firmly pressed against the wall of the trench. Where the trench is excavated in loose, sandy or softsoil or soil which has been previously excavated or soil which is under hydrostatic pressure, each piece of sheathing shall be driven into the bottom of the trench so as to be firmly held in place.

In case of deep and wide open cut excavations, any of the following situations may arise:

9

where providing safe stable slopes for excavated pit may be economically impractical due to quantities of excavated material to be relocated.

ii) where slopes required for excavation may be infeasible due to proximity of nearby structure(s).

5.3.1.1 Where twa or more pieces of sheathing are used one above another, the sheathing shall be so arranged so that the lower pieces of sheathing overlap the lowest wales ing the pieces of sheathing next above it. These pieces of sheathing shall be firmly driven into the soil and securely ed by wales and struts as the trench is made deeper.

iii) where excavation of slope may be undesirable due to fluid condition of the erratic material being worked. In such situations sheet-piling may be resorted to for side protection. This procedure may provide a kind of retaining wall to contain the materials adjacent to the excavation. The piles may be of timber, concrete, steel or composite materials depending upon the depth of excavation, strength and life of sheet piles required. For steel sheet piling refer IS 2314 : 1986.

5.3.2 Wales The wales shall be parallel to the bottom or the proposed bottom of the trench. Each wale shall be ed on cleats spiked to the sheathing or by posts set on the wales next below it and in the case of lowest wale on the bottom of the trench itself. Where necessary, wedges may be provided between a wale and the sheathing it s so that roughly uniform is given to all individual pieces of sheathing.

5.6 Inspection and Examination 5.6.1 No person shall work in any excavation, shaft,

or earthwork, unless all timbering and plant used therein are inspected by a competent person before work is started and also after explosives have been used in or near the excavation, shaft or earthwork.

5.3.3 Struts

5.6.2 When open excavations with steep side slopes

Struts shall be horizontal and at right angles to the wales or sheathing ed thereby. Struts shall be cut to the proper length required to fit in tightly between the wales. Where necessary, the struts shall be held securely in place by wedges, driven between the struts and the wales.

are carried out by means of blasting, after every blasting operation, side slopes of excavations shall be carefully examined by a competent person to prevent rock falls. Work inside the excavations shall not commence until all loose rock on the sides is first removed. All workers engaged in such excavations shall use helmets.

5.3.4 Struts shall be placed on cleats spiked or bolted to posts ing wales.

5.6.3 Inspection shall be carried out after heavy rain or storms to ensure safe working conditions.

5.3.5 It shall be ensured that no nails are protruding out of wooden planks to cause any injury.

6 LOOSE SIDE MATERIAL

5.4 Sizes and Spacing of

6.1 All loose stones, projectingclumps

of earth, pockets of unstable material which might come down on the workers in the trench or any condition which is a hazard, shall be either removed or the excavated sides adequately braced and the trench suitably guarded. On steep slopes workmen shall not be permitted to work one above the other.

5.4.1 The sizes and spacing of sheathing, wales and

struts used for shoring and timbering for different depths of trench shall be as given in Table 1 for hard soil, Table 2 for soil which may crack or crumble, Table 3 for loose, sandy or soft soil and soil which has been previously excavated, and Table 4 for soil under hydrostatic pressure. Where the section of a wale or strut is rectangular the longer side shall be kept vertical.

6.2 Stockpiles of these materials shall be so located, as to provide easy access for withdrawing. These stockpiles shall not be located in the immediate vicinity of overhead powerlines.

5.4.1.1 Where distinctly different types of soil strata are encountered each strata shall be treated separately as is required by its characteristics.

6.3 Materials shall not be piled against walls as this may endanger the walls. 3

Table 1 Hard Soil

3 Y %

(Clause 54.1)

.. Item

Sheathing A

Depth or Trcllch

No. Section

Wales A Horizontal

Section

Spacing, Max

StIlltS A

Y Vertical Spacing, MLX

/ widtk

of

Trench not More tkan2m

(1)

P

Width

of

Trench

Verli-

Hori-

co1

zontal

Between 2mand4m

(5)

(2) m

7 Spacing

Section

cm

cm

m

cm

cm

m

m

2

15x 15

1.5

10 x 10

10 x 15

1.5

3

15 x 15

1.5

10 x 15

15 x 15

1.5

3

m

1.

Over 2 but not over 3

5X20

2.

Over 3 but not over 5

5 x 20

1.5

3.

Over 5 but not over 6.5

5 x 20

1

20X20

1.5

15 x 15

15 x 15

1.5

3

4.

Over 6.5 but not over 8

5 x 15

Width of member

25X25

1.5

15 x 20

20X20

1.5

3

5.

Over 8 but not over 10

8x20

Width of member

20X30

1.5

20x20

20X25

1.5

3

Table 2 Soil Which May Crack or Crumble (Cfause 5.4.1) Item

Depth

of nwtch

WdCS

Shealhing

Stl-0t.S

A

No.

A

c

Section

Horizontal Spacing, Max

section

Vertical Spacing, Max

7

Section A Width of Trench norMore

lhan2m

(1)

I /

Width of Trench BcrWeen 2mand4m

Spacing A

Verti.

Hori-

Cd

zontal

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

w>

m

cm

m

cm

m

cm

cm

m

m

-

1.5

3

1.

Over 1.5 but no1 over 2.5

5 x 20

1.5

10 x 15

1.5

10x 10

2.

Over 2.5 but not over 3

5 x 20

I

15 x 15

1.5

ldx

10

15x 15

1.5

3

3.

Over 3 but not over 5

5 x 20

0.5

15 x 20

1.5

10x 15

15x 15

1.5

3

4.

Over 5 but not over 6.5

5 x 15

Width of member

20 x 25

1.3

i5r

15

20X20

1.5

3

20

20X20

1.5

3

20X25

1.5

3

wl . 5.

Over 6.5 but not over 8

5 x 15

Width of

25X25

1.5

1sx

6.

Over 8 but not over 10

8 x 20

Width of member

20X30

1.5

2Okzo

Table 3 Loose Sandy or Soft Soil or Soil Which Has been Previously

Excavated

@ Y %

(Clause 5.4.1) Item

Depth of Tlmcb

..

Sht&Ilillg

wales

--

No.

-SediOlt

H0riZontal

c Section

Y

Section A

Y Width of Trench not More than2m

Spacing, Max

(1)

Stl?& rh spacing

Width of Trench BcrwrCn 2mrud4m

Vcm’Cd

Hori- zontal

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

m

cm

m

cm

m

cm

cm

m

m

0.4

IO x 15

1.5

10% 10

10 x 15

1.5

3

1

10x 15

15 x 15

1

3

1.

Over 1.5 but not over 2.5

5X20

2.

Over 2.5 but not over 3

5 x

15

Width of member

15 x P

3.

Over 3 but not over 5

5 x 15

Width of member

20X20

1.5

15 x 15

15 x 15

I.5

3

4.

Over 5 but not over 6.5

5 x 15

Width of member

20X.25

1.5

15 x 15

15 x 20

1.5

3

5.

Over 6.5 but not over 8

8X20

Width of

20x25

1.5

15 x 20

20X20

1.S

3

6.

Over 8 but not over 10

8 x

Width of

25x25

1.5

20 x 20

20X20

1.5

3

QI

20

Table 4 Soil Under Hydrostatic

Pressure

(Clause 5.4.1) Item

Depth of Trench

Sheathing A

No. Section

Strnts A

WdCS hHorizontal

F Sectlon

Vtttical spacing, Max

Spacing, Max

/

C Width of Trench

n&i More

than2m

m

T Spacing A

Section Width of Trench B&MC% 2mand4m

VcrtiCd

4 ii&zontal

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

cm

m

cm

m

cm

cm

m

m

1.

Over 1.5 but not over 2.5

5 x 15

Width of member

15 x xl

1.5

10 x 10

15 x 15

1.5

3

2.

Over 2.5 but not over 3

5 x 15

Width of member

15 x 25

1

io x 15

15 x 15

1.5

3

Over 3 but not over 5

8X20

Width of member

25X25

1.25

15 x 15

15 x 15

1.25

3

4.

Over 5 but not over 6.5

8X20

Width of member

25X30

1.25

20X20

20X20

1.25

3

5.

Over 6.5 but not over 8

10x 20

Width of member

25X35

1

mxm

20X25

1

3

6.

Over 8 but not over 10

10 x 20

Width of member

35 x 35

1

200x25

25X25

1

3

IS 3764 : 1992 7 MINIMUM

9.4 Tools

BERM

Workers shall be provided with proper tools. where break-down work is required, tools of ample length shall be provided. The men shall be warned to guard against the danger arising through the sudden movement of material, which might throw them offbalance or cause them to come in path of dislodged boulders or other falling objects. The workmen shall be adequately spaced to avoid being accidently struck by tools of fellow workmen.

7.1 Excavated material shall be kept away from the edge of the trench to provide a clear berm of a width of not less than one third the final depth of excavation or as required by design. 7.1.1 In special cases, where the disposal area is limited or where the application of this requirement is impracticable, the person in charge may adopt a berm of reduced width in any case not less than 1 m provided the material being excavated is sufficiently stable and the shoring is designed to carry the additional load. In all such cases substantial toe-boards shall be provided to prevent ‘roll backs’ into the trench. 8 EDGE OF EXCAVATION

TO BE K

10 MEANS OF ACCESS AND ESCAPE 10.1 Pathways Pathways shall be non-slippery and shall be of adequate width not fess than 75 cm. They shall be strong enough to withstand the intended use.

CLEAR

8.1 Care shall be taken to keep tools or material, such as wheel barrows, shovels, picks, tile, cement and lumber, far enough from the edge of the trench to prevent their being inadvertently knocked into the trench.

10.2 Gangways Gangways shall be of proper construction and adequate width. If planks are used, they shall be laid parallel to the length of gangway and fastened together against displacement. Planks shall be uniform in thickness and shall be provided with cleats to ensure safe walking. Gangways shall be kept clear of excavated material or other obstruction. Wherever pathways and gangways are suspended, these must have guard rails and side s on both sides to prevent fall of workmen into the excavation.

8.2 No material or load shall be placed or stacked or removed near the edge of any excavation, shaft, pit or opening in the ground as it may endanger the persons employed below. 9 PLANT

AND MACHINERY

10.3 Ladders

9.1 Heavy equipment, such as excavating machinery and road traffic shall be kept back from the excavated sides at a distance not less than the depth of trench or at least 6 m for trench deeper than 6 m.

Excavations shall have at least one ladder per 1.5 m of length or fraction thereof in case of hazardous work and per 30 m of length or fraction thereof in case of relatively less hazardous works. Ladders shall extend at least one metre above the top of the cut to provide a hand hold when stepping on or off the ladder. Ladders shall be constructed, used, maintained and inspected in accordance with the requirements laid down in IS 3696 (Part 2) : 1991.

9.2 Power Shovels and Drag-Lines The use of power shovels or draglines in a trench, because of his violent thrust or blows delivered, rapidly renders the banks of the trench unstable and dangerous to people working nearby. These conditions shall be watched for and suitably remedied or eliminated. 9.3

11 PROVISION

Vehicles

OF FENCES,

GUARDS,

ETC

At every part of a trench likely to be frequented by the public such fences, guards orbarricades as will prevent a person or livestock from falling into the trench shall be provided and maintained in place at all times.

The use of trucks or wagons in and about the trenches shall be under the control of an experienced foreman or supervisor. The vehicle shall not be permitted to be driven near the lip of the excavation and for this reason, care shall be exercised in locating roads leading to or from it. The foreman or supervisor shall see that in spotting the vehicles for loading, they are not backed into the wall of the pit and that when loading vehicles by hand, a constant watch is kept for slides or’ boulders rolling down the slope.

12 PROVISION SIGNALS 12.1 Excavation night work.

OF LIGHTING

AND WARNING

areas shall be adequately

lighted for

12.1.1 During the hours of darkness all public side walks and walkways shall be adequately illuminated and warning lights shall be placed in proper sites to ensure safety of pedestrians and the vehicular traffic.

9.3.1 Adequate and well anchored stop blockshall be provided on the surface to prevent operating vehicles from falling accidently into excavation pit. 8

IS 3764 : 1992 percentage of such a gas to ensure that the gas after ventilation is within safe limits. Such tests shall be carried out as frequently as necessary.

12.1.2 At all approaches and exits of the sites of excavations, danger and warning signals shall be placed. In busy or otherwise risky locations a flagman with a red flag shall be posted to warn the public and the approaching trucks and’to guide them in proper direction. At every part of a trench likely to be frequented by public, suitable warning signal/red light to prevent a person from falling into the trench shall be provided and maintained in place at all times.

15.3 Where mechanical ventilation may not adequately supply uncontaminated air for the personnel in a trench, such personnel shall be provided with and shall use respiratory protective equipment furnishing air from an uncontaminated source.

12.1.3 Where inflammable substances are stored or present, all electrical installations shall be explosionproof. Portable lamps/flash lights, if required, shall be of approved explosion-proof type.

15.4 Where explosive mixtures of gases may be present, sufficient ventilation shall be provided to render the area safe by test before workmen enter the trench. Air containing more than 1.5 percent by volume of flammable gas shall be considered dangerous.

13 USE OF SAFETY ROPE 13.1 When a workman is required to enter a hazardous trench ( the sides of which shall be properly braced ) or to scale rock from the side slopes of a trench a safety rope shall be securely tied to the safety belt worn by him so that, if necessary, he may be assisted or drawn to safety.

15.5 No internal combustion engine shall be operated in a trench unless adequate provisions are made to ensure that the exhaust gases and fumes are rendered harmless or are discharged to a point sufficiently remote from the trench to prevent their return to or accumulation in the trench.

13.2 Lifelines shall be secured to at least two substantial anchorages or structural . Manila lifelines, used for ing personnel on safety belts, shall be at least 20 mm in diameter and shall have a wire core.

16 DRILLING AND BLASTING OPERATIONS Where drilling and blasting operations are to be encountered, safety precautions as laid down in 4081 : 1986 should be taken.

14 LONE WORKERS 17 INSECTS - LEECHES - VERMINS - sNAKES A lone worker shall not be permitted in trenches unless there is at least one worker on the ground close by on duty. # 15 RARMFUL GASES AND FUMES

Protection against hazards involving insects, vermins, leeches orsnakes shall include the following controls as are pertinent : Instructions regarding potential hazards.

15.1 It shall be ensured that no harmful gases or fumes are present in the trench to such a degree as may endanger the health or safety of persons working in them.

Boots, hoods, netting, gloves, masks, or other necessary personal protection.

4 Repellents. 4 Drainage or spraying of breading areas.

15.2 Where gases and fumes are likely to be present in a trench or tests show their presence therein, sufficient mechanical ventilation to protect the health and safety of persons working there shall be provided.

e) Burning or destruction of nests. 9 Use of smudge pots for protecting smallareas. 63)Elimination of unsanitary conditions which

152.1 Air shall be considered unfit for workmen to breath if it contains any of the following :

a) Less

propagate insects or vermins.

h) Extermination 3 Fumigation. k) Inoculation.

than 19 percent of oxygen by volume,

b) More than 1 percent of carbon dioxide by volume,

4 Approved first-aid remedies for the affected.

4 More than 0.01 percent of carbon monoxide by volume,

4

measures against rodents.

18 POISONOUS PLANTS

More than 0.002 percent of hydrogensulphide gas by volume, and

4 More than 0.002 percent of nitrous oxide by

In areas where workers are exposed to poison ivy, oak, surmac or other poisonous plants, the following protective measures, as pertinent, shall be provided :

Where presence of a harmful gas is established at a worksite, suitable arrangements be made to check the

a) All workers shall be instructed in identification of the plants and preventive measures.

volumes.

9

IS 3764 : 1992 21 SHELTER

b) Where

practicable, the plants shall be removed or destroyed.

4

Appropriate protective clothing, gloves, etc, shall be worn.

4 4

Protective ointments shall be provided.

A suitable shelter shall be provided at a safe location where the workmen may take their lunches or find shelter from sudden storms. This will obviate the danger, always present, when men seek shelter against the elements or to take lunches under the steep walls of the pit. Such unsafe practices shall be . prohibited.

Soap and wafer shall be available for washing exposed parts.

f) Approved first-aid remedies shall be provided

22 TEMPORARY FOUNDATIONS

f3) Immunisation

Foundations, adjacent to and below which excavation is to be made, shall be ed by shoring, bracing or underpinning as long as the trench remains open.

for treatment of affected skin areas.

treatments, where applicable.

19 OVERHANGS AND SLOPES

S FOR

23 WALK-WAYS AND BRIDGES

19.1 An overhang is generally made up of overburden frozen or cemented gravel, sand, boulders or consolidated clay which juts out from the trench wall, or it may be part of the wall which is standing in a more or less perpendicular position. These may come down. unexpectedly. They shall be removed.before further material is taken from that part of the trench where they occur.

All trenches over which men or equipment are required to cross shall be provided with walk-ways or bridges. Where the trenches are more than 2 m deep guard rails shall be provided. 24 DANGEROUS AREAS Visitors shall not be permitted to enter the scene of excavations unless they are accompanied by a supervisor or foreman. Adequate measures shall be taken to prevent workers and spectators from approaching the dangerous areas.

19.2 In cases where power-driven machinery is employed in the excavation of a trench, steep working faces may necessarily result from the nature of the machinery used. These steep faces shall be broken down to a stable slope as they occur, except at the working face. In such cases, however, every precaution shall be taken to prevent unprotected workmen from entering the zone of danger either on the surface above,the face or at the bottom of the trench near the face.

25 COMMON HAZARDS IN EXCAVATION The person-in-charge of excavation work shall familiarize himself with the nature of material to be excavated and the factors he has to specially look for and guard against. More important of them are given below :

19.3 The walls of the excavation, other than the working face, and the latter when operations in the pit are suspended temporarily or finally completed, shall be maintained and left at such a slope that the danger from caving or sliding is eliminated.

Quicksand The tendency of quicksand to run necessitates the use of close continuous sheathing; while damp sand, being more stable, may require only bracing. Rock shall be sealed as often as necessary to ensure against falling fragments.

19.4 Break Downs Walls rendered unstable by blasting, by the action of alternate freezing and thawing or by the operation or movement excavating or transporting equipment . shall be put in a safe condition by breaking them down until a stable slope is made; while these operations are underway no man shall be permitted to work in the trench immediately below, and no material shall be removed from the bottom of the slope until the breaking down is completed.

Water Content or Degree of Saturation The side walls of a trench which may be reasonably stable when dry, may become highly unstable due to saturation of the earth following a heavy rainfall. Effect of Freezing and Thawing Due to expansion of water when freezing rock fragments, and boulders, etc, are frequently loosened. The side walls of the excavationshall be constantly watched for signs of cracks during a thaw. When depending in whole or in part of freezing to the side walls great care shall be taken during thaws to provide suitable bracing or remedy the condition by sealing of the loose material from the sides.

20 UNDER CUTTING Borrowing or mining or what is known as ‘gophering’ shall not be allowed. In any trench where such methods have been followed, the cavities left shall be eliminated by cutting back the bank slope before removing any further material from the section of the trench. 10

IS 3764 : 1992 d) Vibration from Nearby Sources

and allow the unstable material to flow into the cut.

Vibrationduetoadjacentmacbinery,vehicles, rail-roads, blasting and other sources require that additional bracing precautions are to be taken.

f) Surcharge Imposed by Adjacent Buildings, Lumber Piles, etc Proximity of buildings, piles of lumber, crushed rock, sand and other construction materials, derricks, concrete mixtures, crawler, cranes and other plants, large trees or other heavy objects may impose such a surcharge on the side of the trench to cause a slide unless precautions are taken. Under these conditions additional bracings shall be provided to the sides of trench.

e) Adjacent Loose Fills The possibility of pockets of unstable material, such as dry and quicksand or old fills adjacent to a trench requires special investigation and care. Such material may be separated from the pit by only a thin wall of stable material which might easily collapse

11

Standard

Mark

the Burcuu e/ h&m The Standard Mark on products covered by an Indian Standard conveys the assurance that they have been produced to comply with the requirements of that standard under a well defined system of inspection, testing and quality control which IS devised and supervtsed by BlS and operated by the producer. Standard marked products are also continuously checked by BIS for conformity to that standard as a further sat‘eguard. Detatls of conditions under which a licence for the use of the Standard Mark may be granted to manufacturers or producers may be obtamed from the Bureau of Indian Standards. The use of the Standard

Mark IS govcrnrU

Srandards Acr, 1986 and the Rules anJ Regulations

by the provistorrs

made thereunder.

ot

Bureau

of Indian

Standards

BIS is a statutory institution estahllshed under the Bureurc oq‘ Indian harmonious development of the activities of standardization. marklnp and attending to connected matters in the country.

Srurrhrh

1986 to promote certification of goods

Acf,

and quality

Copyright

No part of these publications may be reproduced In BIS has the copyright of all its publlcatlons. any form without the prior permission in writing of BIS. This does not preclude the free use, in the the standard, of necessary details. such as symbols and sizes, type or grade course of implemenring Enquiries relating to copyright be addressed to the Director ( Publications ). BIS. designations. Revision

of Indian

Standards

Indian Standards are reviewed perlodically and revised, when necessary and amendments, rf any, are s of Indtan Standards should ascertain that they are in possession of issued from time to time. Comments on this Indian Standard may be sent to BIS giving the the latest amendments or edition. following reference : Dot : No. CED 45 ( 4918 ) Amendments

Amend

Issued

Since

Publication

Date of Issue

No.

BUREAU

OF INDIAN

Text Affected

STANDARDS

Headquarters: Manak Bhavan, 9 Bahadur Shah Zafar Marg. New Delhi , Telephones : 331 01 31, 331 13 75

Regional

Telephone

: Manak Bhavan, 9 Bahadur NEW DELHI 110002

Eastern

: l/14 C. I. T. Scheme VII M, V. 1. P. Road, CALCUTTA 700054

Southern Western

Branches

Telegrams : Manaksanstha ( Common to all Offices )

Offices:

Central

Northern

110002

Shah Zafar Marg

331 01 31 I 331 13 75 Maniktola

: SC0 445-446, Sector 35-C, CHANDIGARH : C. I. T. Campus,

IV Cross Road,

: Manakalaya, E9 MIDC, BOMBAY 400093

Marol,

MADRAS

Andheri

37 86 62

53 38 43

160036

235 02 16

600113

( East )

612 92 95

: AHMADABAD. BANGALORE. BHOPAL. BHUBANESHWAR. FARIDABAD. GHAZIABAD. GUWAHATI. HYDERABAD. LUCKNOW. PATNA. SRINAGAR. THIRUVANANTHAPURAM.

COIMBATORE. JAIPUR. KANPUR

Printed at Printrade. New Delhi, India