File Tracking System Project Report 4w2y56

i

Table of Contents List of Figures.................................................................................................................... v List of Tables ................................................................................................................... vii Abstract........................................................................................................................... viii Chapter 1 Introduction..................................................................................................... 1 1.1 Problem Definition ................................................................................................... 1 1.2 Scope......................................................................................................................... 2 1.3 Product Perspective................................................................................................... 2 1.4 Product Functions ..................................................................................................... 3 1.5 FTS s ................................................................................................................. 4 Chapter 2 FTS Requirements Specification ................................................................... 5 2.1 Functional Requirements .......................................................................................... 5 2.1.1 Sign In ................................................................................................................ 5 2.1.2 Create File .......................................................................................................... 6 2.1.3 Mark File............................................................................................................ 6 2.1.4 Add Comments .................................................................................................. 7 2.1.5 Close File ........................................................................................................... 7 2.1.6 Attach Reference Document .............................................................................. 7 2.1.7 Track File ........................................................................................................... 7 2.1.8 View History...................................................................................................... 8 2.1.9 Generate and View Alerts .................................................................................. 8 2.1.10 View File.......................................................................................................... 8 2.1.11 Sign Out ........................................................................................................... 8 2.1.12 Send Reminder................................................................................................. 8 2.1.13 Reactivate File ................................................................................................. 9 2.1.14 Request File ..................................................................................................... 9 2.1.15 View Personal .................................................................................... 9 2.1.16 Edit Database Information ............................................................................... 9 2.2 Software System Attributes .................................................................................... 10

docsity.com

ii 2.3 Logical Database Requirements ............................................................................. 10 2.4 Constraints .............................................................................................................. 11 2.5 Assumptions and Dependencies ............................................................................. 11 Chapter 3 FTS Project Plan........................................................................................... 12 3.1 Project Life Cycle ................................................................................................... 12 3.2 Project Effort and Time Estimation ........................................................................ 13 3.3 Project Resources.................................................................................................... 16 3.4 Project Schedule ..................................................................................................... 17 Chapter 4 FTS Architectural Design ............................................................................ 19 4.1 System Architecture................................................................................................ 19 4.2 Dataflow Diagram................................................................................................... 20 4.2.1 Context Diagram.............................................................................................. 20 4.2.2 Diagram 0......................................................................................................... 21 4.2.3 Detailed Diagram ............................................................................................. 22 4.3 FTS Architecture Diagram...................................................................................... 22 Chapter 5 FTS Database Build...................................................................................... 24 5.1 Entities .................................................................................................................... 24 5.2 Relationships........................................................................................................... 26 5.3 FTS ERD................................................................................................................. 28 5.4 Relational Schema .................................................................................................. 29 5.5 Normalization ......................................................................................................... 29 5.6 Database Implementation ....................................................................................... 31 Chapter 6 File Initiation Build....................................................................................... 33 6.1 Create File Functionality ........................................................................................ 33 6.2 Mark File Functionality .......................................................................................... 36 6.3 Attach Reference Document functionality ............................................................. 37 Chapter 7 File Processing Build .................................................................................... 39 7.1 Add Comments Functionality................................................................................. 39

docsity.com

iii 7.2 Close File Functionality.......................................................................................... 40 7.3 View File Functionality .......................................................................................... 41 7.4 Request File Functionality ...................................................................................... 42 7.5 Reactivate File Functionality .................................................................................. 45 Chapter 8 File Tracking Build....................................................................................... 47 8.1 Track File Functionality.......................................................................................... 47 8.2 View History Functionality .................................................................................... 48 8.3 Send Reminder........................................................................................................ 50 8.4 Generate and View Alert Functionality .................................................................. 51 8.5 View Personal ........................................................................................... 53 Chapter 9 FTS Security Build ....................................................................................... 55 9.1 Sign In Functionality .............................................................................................. 55 9.2 Sign Out Functionality............................................................................................ 56 9.3 Edit Database Information ...................................................................................... 56 Chapter 10 System Testing ............................................................................................ 61 10.1 Performance Testing ............................................................................................. 61 10.1.1 Graphs Generated by ACT for FTS ............................................................... 61 10.1.2 Tests Report Generated by ACT for FTS ...................................................... 63 10.2 Stress Testing........................................................................................................ 64 10.3 Security Testing .................................................................................................... 64 10.4 Recovery Testing .................................................................................................. 64 Chapter 11 Conclusion ................................................................................................... 65 11.1 FTS Navigation Map ............................................................................................ 65 11.2 Application............................................................................................................ 66 11.3 Future Recommendations ..................................................................................... 66 References........................................................................................................................ 67 Appendices....................................................................................................................... 68

docsity.com

iv A.

Abbreviations ...................................................................................................... 68

B.

Definitions............................................................................................................ 68

C.

Database Tables .................................................................................................. 71

docsity.com

v

List of Figures Figure 2-1: Id and verification ............................................................................ 5 Figure 2-2: Create file use case diagram............................................................................. 6 Figure 2-3: Track file use case diagram.............................................................................. 7 Figure 2-4: Reactivate file use case diagram ...................................................................... 9 Figure 3-1: FTS incremental model.................................................................................. 13 Figure 3-2: FTS time line.................................................................................................. 18 Figure 4-1: FTS three tier architecture.............................................................................. 20 Figure 4-2: FTS context diagram...................................................................................... 21 Figure 4-3: FTS diagram 0................................................................................................ 21 Figure 4-4: Process file detail diagram ............................................................................. 22 Figure 4-5: FTS architecture diagram............................................................................... 23 Figure 5-1: Department entity........................................................................................... 24 Figure 5-2: Employee entity ............................................................................................. 25 Figure 5-3: File entity ....................................................................................................... 25 Figure 5-4: Reference attachment entity........................................................................... 26 Figure 5-5: Department Employee relationship................................................................ 26 Figure 5-6: Head relationship ........................................................................................... 26 Figure 5-7: Create relationship ......................................................................................... 26 Figure 5-8: Mark relationship ........................................................................................... 27 Figure 5-9: Message relationship...................................................................................... 27 Figure 5-10: FTS ERD...................................................................................................... 28 Figure 6-1: FTS main page GUI ....................................................................................... 33 Figure 6-2: Create file GUI............................................................................................... 34 Figure 6-3: Attach reference document GUI .................................................................... 38 Figure 7-1: Add comments GUI ....................................................................................... 40 Figure 7-2: View file GUI................................................................................................. 42 Figure 7-3: Request file GUI ............................................................................................ 44 Figure 7-4: Reactivate file GUI ........................................................................................ 46 Figure 8-1: Track file flow chart....................................................................................... 47

docsity.com

vi Figure 8-2: Track file GUI................................................................................................ 48 Figure 8-3: View history flow chart.................................................................................. 49 Figure 8-4: View history GUI........................................................................................... 49 Figure 8-5: Send Reminder GUI....................................................................................... 51 Figure 8-6: Alert pop up window...................................................................................... 53 Figure 8-7: Received alerts GUI ....................................................................................... 53 Figure 8-8: View personal GUI ........................................................................... 54 Figure 9-1: Sign In GUI.................................................................................................... 55 Figure 9-2: Edit employee information GUI .................................................................... 58 Figure 9-3: Create new department GUI .......................................................................... 58 Figure 9-4: Edit department information GUI .................................................................. 59 Figure 10-1: Connection vs. requests per second ............................................................. 62 Figure 10-2: Connections vs. TTLB ................................................................................. 62 Figure 11-1: FTS navigation map ..................................................................................... 65

docsity.com

vii

List of Tables Table 3-1: Estimation of information domain values ....................................................... 15 Table 3-2: Calculation of complexity adjustment factor .................................................. 16 Table 10-1: Performance tests report................................................................................ 63

docsity.com

viii

Abstract File Tracking System (FTS) is software that facilitates the process of file movement and tracking within an organization. In government and public organizations, every official procedure is carried out by moving files. When a file is moved, an entry is made in office diary for record keeping. Comments are added in file to indicate the action to be taken and then file is moved further if required. For example in PIEAS consider the case in which an employee needs leave for some period of time. First he sends leave application to his respective Head of Department (HOD). After approval from HOD the application is forwarded to Senior and finally Rector PIEAS considers that application. The whole process may span a number of days instead of taking few hours. So the major drawback of this traditional system is the delay in processing. Another downside of this system is that one might not be able to track location of a file. Incase the entry in diary is missing; it becomes hard to locate file. Even if file is tracked by searching diaries, the whole process may take a lot of time, without any guarantee of success. The File Tracking System not only accelerates file processing but also ensures that each and every file present in the database can be tracked. It allow to create file, mark file to other of organization, to send reminders, to add comments, to track file and view history of file processing. can access this system within organization using his own workstation provided that his PC is connected to LAN (on which File Tracking System has been hosted) present in an organization. File Tracking System can be customized for use in organizations like educational institutes, insurance companies, banks, government agencies.

docsity.com

1

Chapter 1 Introduction The Chapter throws light on the problem definition, scope and perspective of the project. The problem, to which software provides solution, has been discussed in section 1.1. Then the scope of project has been defined. Then product perspective and functions have been discussed.

1.1 Problem Definition Every request or official procedure carried out in a government/private organization is processed through a file. A file refers to a physical hardcopy documents which contain details about an official procedure and related material. In this aspect, every letter, application, receipt, acknowledgement or any kind of correspondence with a government/private organization is called a File. An organization can have more than one departments and each department may have its own office. When an employee creates a file, he/she can mark file to the employee of same department or to the employee of another department in the same organization. An employee on receiving a file adds comments to it in order to specify the actions to be taken. When processing of file is complete, the file is closed. Traditionally organizations keep records of files movement in s or diaries. Every time a file is marked from one person to another, an entry is made in diary. As the number of files grows, the entries of file movement also increase. The job to maintain diaries becomes more and more difficult as well as cumbersome. In order to track file, the diaries are searched manually which not only waste time but also require extra effort. The situation becomes more complicated incase file is not present at the place where it has been mentioned in the diary. File Tracking System (FTS) is a software product that computerizes the process of file processing and tracking within an organization. It has been developed to solve problems like file lost, processing delays and other issues related to file movement within an organization. It allows an individual to create files, mark files to others and to track the required file from his desk securely and quickly.

docsity.com

2

1.2 Scope FTS provides an intranet based solution for file management. It can be used for controlling entire files record system of an organization. FTS is independent software i.e. it is not a part of some larger system and does not require integration to other existing systems. The Relational Database Management System (RDBMS) holds all record relevant to files and their movements. Software interfaces help interaction with RDBMS. The product is fully operational and can be implemented in an organization. This Thesis presents complete design and implementation details of the software product. It also states possible enhancements in the system.

1.3 Product Perspective FTS is completely analogous with the traditional file processing system. Difference is that instead of maintaining hard copies of files and records, their soft copy is maintained in RDBMS. All file processing procedure has been computerized. According to the survey conducted by authors for competitive products, a number of products are available for sharing files e.g. Microsoft Windows Share Point [7] is an integrated portfolio of collaboration and communication services designed to connect people, information, processes, and systems both within and beyond the organizational firewall. A comparison of FTS with such products has been made. The similarities are listed below: a. An intranet based application. b. The database stores information related to files e.g. name, size, extension etc. c. Files can be searched by their names. d. Files can be accessed using desktop PC connected to LAN. The main differences are listed below: a. FTS is accessible within an organization. b. The main purpose of FTS is to facilitate file processing and management not files sharing.

docsity.com

3 c. Except notices, a file will be present at only one location at a time i.e. at a time only one employee can have access to a file. d. FTS provides restricted access to file. e. s can communicate and collaborate with other colleagues by sending reminders and requests. f. Alerts are generated whenever file is marked to an employee.

1.4 Product Functions The main functions of this software product are listed below: a. authentication: The product provides facility of authentication by ing id and before giving the access to the system. b. File creation: The Product provides facility to create new files. c. File transfer: File transfer means moving file from one to another. The product provides file transfer feature. The term marking a file has same meaning as transferring a file. d. File tracking: The product allows facility to track the location of file. It also provides information like file status and currently responsible person. Here the term currently responsible person refers the by whom file is being currently processed. e. Reminders: Reminder means the message sent to notify currently responsible to process file as soon as possible. f. Alerts: The purpose of alert facility is to inform that he/she has received a file for processing. Alerts are generated by system. g. File reactivation: The product provides ability to reactivate a file. When file processing is complete, it is closed. File reactivation means to start processing on such files again. h. File request: The product facilitate to request a file. File request can be made by who wants to view or process file but that particular file is being processed by someone else. i. File update: File contents cannot be updated but comments can be appended with the file.

docsity.com

4 j. Reference document attachment: The product allows attaching reference documents with file. Documents with extension .pdf, .doc and images can be attached with a file. k. File history: The product provides facility to view history of file processing i.e. during the lifetime of a file, it has been processed by whom and when. l. Closing a file: The product allow to close a file if it has been processed completely and requires no further processing. m. Personal : The history of i.e. which files he/she processed or created is maintained in personal . n. istration rights: having istrative rights can add, delete and modify information related to departments present in organization or organization’s .

1.5 FTS s The s of FTS are the of organization using FTS. Three types of s can be differentiated on the basis of technical expertise and access rights. They are: a. Employees: Employees mean workers of an organization. They are main of FTS. b. Head: There can be two types of Head i.e. Head of department and Head of Organization. Head of organization will have more rights as compared to Head of department and Head of department will have more rights as compared to employees. c. : will be responsible for setting access permissions and editing information related to employees and departments in the organization.

docsity.com

5

Chapter 2 FTS Requirements Specification The functional and non functional requirements of File Tracking System have been discussed in this Chapter. The Chapter also provides an insight on the constraints, assumptions and dependencies of the system.

2.1 Functional Requirements Functional requirements are associated with specific functions, tasks or behaviors that must be ed by system. The specific requirements listed below provide detailed information about each functional requirement of File Tracking System.

2.1.1 Sign In The purpose of sign in functionality is to allow only authenticated s to access FTS. A unique id and is assigned to each . Every time wants to access FTS, he/she has to enter his/her id and . id and must be verified from the database server.

Figure 2-1: Id and verification

docsity.com

6

2.1.2 Create File The can create new files in FTS. In order to create file, must specify following information: a. File name b. File type c. File category d. Subject e. Name of organization member to whom file is to be marked f. Text g. Reference document (if any) The system will assign unique file id to each file. File type can be top secret, confidential or public. File category can be normal or notice. The use case diagram to create new file has been shown below:

Figure 2-2: Create file use case diagram

2.1.3 Mark File Whenever creates a file, he has to specify the person(s) responsible for processing of file. The responsible person can send that file to other person for further processing. So marking a file means to send file to the person who is responsible for processing the file. In order to create a file, must specify the name of person responsible for processing of file. If file category is normal, it can be marked to only one person at a time. But incase the file category is set to notice; it can be marked to more than one persons at a time.

docsity.com

7

2.1.4 Add Comments Original contents of file and previously added comments can’t be changed but new comments can be added in a file. Comments specify the action to be taken or personal opinion. Only the person responsible for processing of file can add comments in a file.

2.1.5 Close File File can be closed after its processing has been completed. The status of file indicates whether file has been closed for processing or not. When a file has been closed, no comments can be added further until file is reactivated.

2.1.6 Attach Reference Document The file creator and/or currently responsible person can attach reference document with file. The purpose of these attachments is to enable to send useful, important and relevant material with file.

2.1.7 Track File File Processing can be traced by the creator of file or any person who has been responsible for the processing of file. The location of file can be traced using the file id, name or creator’s name. The use case diagram is shown below:

Figure 2-3: Track file use case diagram The file can be tracked in following ways: a. Using File id b. Using File name

docsity.com

8

2.1.8 View History must be able to view history of file processing i.e. who has processed the file and when. File History can be viewed by using file id or File name. History includes information related to file id, sender id, receiver id, comments and date and time.

2.1.9 Generate and View Alerts The system will generate file alerts when a file will be marked. Currently responsible person will receive these alerts. This functionality is important because the responsible person must have information that he has received a new file for processing. Otherwise, it will depend on him when he opens the interface of system and check the files he is responsible for.

2.1.10 View File must be able to view file. Information about the file name, type, category, subject, text and previous comments are shown. The view file functionality helps enables to view file even if he/she don’t want to enter comments or mark it further.

2.1.11 Sign Out The must be able to sign out. The session ends when a signs out. All information stored in session is also cleared. Incase remains inactive for more than thirty minutes, the session is cleared. The sign out functionality is important from security point of view. Incase shares a computer, will be able to prevent anyone else from using FTS from his id.

2.1.12 Send Reminder Reminder can be sent to currently responsible person by the file creator or previously responsible persons or by Head. The current responsible person will receive a message in which it will be mentioned that who has sent this reminder and for which file he has received that reminder. Sender can also send message with the reminder.

docsity.com

9

2.1.13 Reactivate File Only closed files can be reactivated by Head. The use case diagram is shown below:

Figure 2-4: Reactivate file use case diagram Other employees can send request of file reactivation to Head of Department and/or Organization. File will be reactivated only in the case the Head approves the request.

2.1.14 Request File There can be two types of file requests; simple file request and file reactivation request. Only Head of Department/Organization will be able to request a file. The current responsible person on receiving request will mark file to Head. Head can request a file if he/she wants to view file. Employees can send file reactivation request. Head is responsible to approve or deny request.

2.1.15 View Personal The must be able to view the files initiated by him/her or the files for which he/she has been responsible. The purpose of this functionality is to facilitate in ing file ids and file names.

2.1.16 Edit Database Information can edit information related to an employee, can create new departments and edit information related to existing departments. So the database can be accessed using software interface of FTS. No one is allowed to access database directly. Only can edit database information using FTS interfaces.

docsity.com

10

2.2 Software System Attributes The non-functional attributes of the system are described below: a. Reliability: The system is reliable i.e. incase the server crashes, it can be recovered within an hour. b. Availability: The system will be available to all s depending on the working hours of employees of an organization. The working hours can be 9:00 a.m. to 6:00 p.m. or 4:00 p.m. c. Security: Security is very much important in FTS because the system is shared among many s simultaneously. The system provides id and authentication to prevent illegal access. Moreover, only currently responsible person is able to view file and process file. d. Maintainability: The FTS has been designed in such a way that it can be maintained easily in future. e. Usability: interface have been designed simple enough that the organization can use it without having any difficulty. f. Scalability: The system has been designed in a way that it can be extended in future. In other words, different organizations can use it without redeg it from scratch. Code has been commented so that programmers other than the author can understand and enhance system. g. Cost Effective: As system is client independent and is installed at server only therefore it saves cost of installation on all clients machine. Moreover, the RDBMS used is My-SQL, which is open source software.

2.3 Logical Database Requirements The database requirements are given below: a. The basic information stored in the system’s database will be in the form of tables. b. The RDBMS is the backbone of FTS; therefore it will be used frequently with the running system.

docsity.com

11 c. The RDSMS will be shared among distributed s. More than one can access system concurrently. All access to the database will be possible through system interface.

2.4 Constraints The followings constrains are present in this System: a. When a file will be closed for processing, it will not be deleted from database. b. New files can be created. Once a file has been created, its original contents can’t be modified but comments can be added in it and reference documents can be attached with it. c. Once a file has been created in database, it can’t be deleted. d. Only currently responsible person can add comments to the file. e. Only Head of department/organization can reactivate file. f. Restricted file access. g. No two files can have same name. h. At a time, one file can be marked to only one person except file of category Notice. i. Images or files having extension .txt, .pdf, .doc can be attached as a reference document.

2.5 Assumptions and Dependencies The assumptions and dependencies for this system are: a. Server based and Client independent Software: The software is install only on server i.e. there is no need to install it on each client machine. b. Intranet based Solution: The software will provide an intranet based solution i.e. the organization must have Local Area Network to which all client machines must be connected. c. Computer Skills: s of the software should have basic knowledge related to computers and Internet.

docsity.com

12

Chapter 3 FTS Project Plan Software Project Planning is one of the initial phases during project development. It plays vital role in software development because it assures that the software product will be delivered in time. In this Chapter details about the FTS project life cycle, calculation of estimated development time and effort and the project schedule have been provided.

3.1 Project Life Cycle The Incremental Model has been selected as the project life cycle. The main essence of incremental model is known as builds. A build can be further divides into modules. Each module provides specific functionality. When a build is completely designed, implemented and integrated in software, the progress is made towards next build. One or more builds may overlap. Incremental model has following characteristics which are the foremost strength of this model [11]: a. Portion of product becomes operational within weeks. b. Change and adaptation are natural to incremental model. c. Phased delivery requires no large capital outlay; rapid return on investment. First Requirement Specification Phase has been performed. After that Architecture Design Phase representing system’s higher level design, has been completed. As incremental model is being followed, so the software product has been divided into five major builds as shown in Figure 3-1: FTS incremental model. The design, implementation and integration phases have been carried out in each build. The builds have been further divided into tasks. Each task represents functionality. The low level design, implementation, integration and testing of all functionalities have been carried out one by one. The five main builds are listed below: a. FTS Database Build b. File Initiation Build c. File Processing Build d. File Security Build The first two phases of project life cycle and five builds have been explained in Chapter 4, Chapter 5, Chapter 6, Chapter 7, Chapter 8 and Chapter 9.

docsity.com

13

Figure 3-1: FTS incremental model

3.2 Project Effort and Time Estimation From the function point calculation given in Table 2.1, the estimates of inputs, outputs, inquiries, files and external interfaces for File Tracking System have been made. For the purposes of these estimates, the complexity weighting factor is assumed to be optimistic, likely, pessimistic and average. The input fields in the approximate six -interfaces

docsity.com

14 (i.e. , Create file, Track, History, Add Comments, Alerts and Reminder) in the product are calculated as follows:Inputs: a. Id b. c. File Name d. File Path e. Subject of File f. Date and Time g. Name of employ/staff member, file to be marked h. Reference File Attachment Output: a. authentication b. File Id c. Sender Name d. Error e. Alert f. Reminder g. Status Inquires: a. Request for create new file b. Request for Store a file c. Request for Attach a document/reference d. Request for add comments e. Request for reactivation f. Request a processed file g. Request for history of file Files: DBMS (More then 1 file in it i.e. .mdf, .ndf, .ldf extension files in it)

docsity.com

15 Each of the complexity factors is estimated and the complexity adjustment factor is computed by answering the questions listed in Table 2.2. Each question is answered using a scale that ranges from 0 (not important/ not applicable) to 5 (absolutely essential). Table 3-1: Estimation of information domain values Optimistic

Likely

Pessimistic

Estimated Cost

Weight

Function Point Count

Number of Inputs

10

13

15

13

4

52

Number of Outputs

8

9

11

10

5

50

Number of Inquiries

8

9

11

10

5

50

Number of Files

3

4

6

4

10

40

-

-

-

-

7

-

Number of External Interfaces

Total Count

192

F.Pest = Total Count × [0.65 + 0.01 × Summation (value)] F.Pest = 192 × [0.65 + 0.01 ×50] F.Pest = 221 Lets assume Avg. Productivity = 6.5 (F.P/pm) Effort in Person Month = F.Pest / Avg. Productivity Effort in Person Month = 221 / 6.5 Effort in Person Month = 34 Since there are two persons in the project team, therefore months required to complete project are: Required Months = 34/2 = 17 months

docsity.com

16

Table 3-2: Calculation of complexity adjustment factor Factor

Value

Backup and Recovery

4

Data Communication

3

Distributed Processing

2

Performance Critical

4

Existing Operating Environment

3

On-Line Data Entry

4

Input Transaction over Multiple Screens

5

Master Files updated Online

3

Information Domain Values Complex

3

Internal processing complex

4

Code Designed for Reuse

3

Conversion/Installation in Design

3

Multiple Installations

4

Applications Designed for Reuse

5

Summation (value)

50

3.3 Project Resources A number of software, tools, and other resources were required to build the software product. These resources had been used to design and implement the software product. The lists have been below: a. .NET Framework v1.1 b. My SQL (DBMS) v5.0 c. IIS (Internet Information Services) v5.1 d. MS Project e. Charismatic FP

docsity.com

17 f. Rational Rose Enterprise Edition g. MS Visio h. Axiom Sys/ERWIN i. LAN The .Net Framework has been used to implement interfaces. The code behind of all interfaces has been written in VB.NET. ASP.NeT and JavaScript have been used to implement the interfaces. Charismatic FP has been used to calculate function points. The project time line has been designed in MS Visio. Axiom, Erwin and Rational Rose Enterprise Edition have been used to design use case diagrams and flow charts. IIS has been used to provide web service. In order to deploy system, following tools must be installed at server end: .NET Framework v1.1 My SQL (DBMS) IIS (Internet Information Services) LAN Following resources are required in order to deploy system: At least 64 MB RAM at client machine At least 256 MB RAM at Server At least 18,152K secondary storage required at client machine At least 10 GB secondary storage required at Server

3.4 Project Schedule The software project plan has been represented by Gantt chart. The Gantt chart shows the activities, the required duration, start time and finish time. It also illustrates the overlapping activities. The Integration and Testing has been carried out throughout the implementation of the project. The project has been started from March 2006. The deadline to complete project was July 2007. The project time line for File Tracking System is replicated on next page.

docsity.com

18

Figure 3-2: FTS time line

docsity.com

19

Chapter 4 FTS Architectural Design The architectural design for software reveals the overall layout of the system. In this chapter, the architecture of file tracking system, dataflow diagrams and architectural diagram have been presented.

4.1 System Architecture File Tracking System relies on a three tiered architecture. In three tier architecture, the interface, functional process logic, data storage and data access are developed and maintained independently on a separate platform. The interface runs on workstation, functional process logic runs on a workstation or an application server. The DBMS contains data storage logic. The 3-Tier architecture consists of following three tiers. a. Presentation Tier b. Application Tier/Logic Tier/Business Logic Tier c. Data Tier The top-most layer is Presentation Tier and it consists of interfaces. The purpose of second tier i.e. Logic Tier is to handle movement and processing of data between the two surrounding tiers. The last tier i.e. Data Tier consists of database and deals with storage and retrieval of data. The advantage of using three tiered architecture is that if system requirements or technology changes, any tier can be upgraded or replaced independently. In File Tracking System, Presentation Tier includes workstations, which will be used for interaction with the system. The Application Tier consists of FTS (File Tracking System) Server. The server will provide communicational information and services. The Data Tier comprises of Database Management System (DBMS). The DBMS not only have data management capabilities but it also stores the information. The workstations will be connected to FTS Server via LAN (Local Area Network). The

docsity.com

20 DBMS will be connected directly to FTS Server. The Three Tier Architecture for File Tracking System has been shown below:

Figure 4-1: FTS three tier architecture

4.2 Dataflow Diagram Data flow diagrams determine requirements of environment by capturing data in simple steps. They show flow of data through organization i.e. from where data originates, where it is directed and where it is processed and stored. Following three data flow diagrams have been drawn for File Tracking System: a. Context Diagram b. Diagram 0 c. Detailed Diagram

4.2.1 Context Diagram The context diagram shows system interactions with external entities. Figure 4- 2 shows context diagram for File Tracking System. The main system has been shown in a bubble and it has been named as File Tracking System. Two external entities have been shown i.e. Head and Employee. Head is also an employee but with extra privileges. The arrows show interaction among the system and external entities.

docsity.com

21

Figure 4-2: FTS context diagram

4.2.2 Diagram 0 Diagram shows system major processes along with external entities, data stores, and data flows. The Diagram 0 for File Tracking System has been shown below:

Figure 4-3: FTS diagram 0 The major processes in File Tracking System are: a. b. Process File c. Mark File

docsity.com

22 d. Track File e. Reactivate File Process involves Id and Verification. The can be an employee or Head of an organization. Process File deals with file processing. Mark File handles file movement. Track File is responsible for locating file location. Reactivate File includes processing required in order to reactivate file.

4.2.3 Detailed Diagram The Process File Bubble can be further exploded into two main processes i.e. Add Comments and Attach Reference Doc as shown in Figure 4- 4

Figure 4-4: Process file detail diagram

4.3 FTS Architecture Diagram The Call and Return architectural style has been selected to show the architecture of File Tracking System. The reason for selecting Call and Return architectural style is that the architecture can be modified or scaled easily in future. The FTS Architectural Diagram for has been in Figure 4-5: FTS architecture diagram.

docsity.com

23

Figure 4-5: FTS architecture diagram FTS Executive is the main controller module that invokes a number of program components which may invoke other components as well. The main program components under the control of FTS Executive have been listed as follows: a. File Initiation Controller b. File Processing Controller c. File Tracking Controller d. Security Controller All these modules interact by calling other modules. The called module itself returns the required information.

docsity.com

24

Chapter 5 FTS Database Build In this Chapter, design and implementation of FTS database have been discussed in detail. First entities and relationships in the entity relationship diagram have been discussed. After that, relational schema, normalization and database implementation have been described.

5.1 Entities The term entity refers to a person, place, event, object, or concept that exists in real world and is distinguishable from others [3]. The entities and their attributes identified in FTS have been described as follows: Department: The attributes are Dept_ID, Dept_Name, Status and Office. Dept_ID is primary key. We are assuming that each department has a unique ID and that each department has one Office. The status provides information that whether the department exists or not.

Figure 5-1: Department entity Employee: The attributes are Emp_ID, Emp_Fname, Emp_Lname, Designation, Status, Rank, Email_address, Office_Ph and Home_Ph. The Emp_ID is primary key. Designation tells whether he/she is a junior engineer (JE), senior engineer (SE) or principal technical officer (PTO) etc and Rank determines grades e.g. 17, 18 or 19 etc. Each employee has unique ID and each employee belong to a particular department. Status informs whether

docsity.com

25

Figure 5-2: Employee entity File: The attributes are File_ID, File_Name, File_Category, File_Type, Subject, Status, and Text. The primary key is File_ID. Each file has a unique id and name.

Figure 5-3: File entity Reference Attachment: The attributes are Ref_ID, Ref_Text, Ref_Name, Type and Size. Each reference document has a unique id. Type provides information about the extension of reference attachment. Ref_ID is primary key.

docsity.com

26

Figure 5-4: Reference attachment entity

5.2 Relationships Relationship is a connection or interaction between the entity instances [3]. The relationship sets identified in FTS are: Dept_Emp: This is a one-to-many relationship that connects employees to their departments. A department can have more than one employee.

Figure 5-5: Department Employee relationship

Head: This is a recursive relationship that connects with employee itself. Each department has a unique head and he/she can be recognized from designation.

Figure 5-6: Head relationship

Create: This is a one-to-many relationship that connects employees to file. We are assuming that one employee can create many files.

Figure 5-7: Create relationship

docsity.com

27 Mark: This is many-to-many tetra relationship that connects employees to file and reference attachment document. A file is marked by many employees at various time instants and an employee marks more than one file at a time. Employees can attach many reference documents to a file that is ready to mark another employee.

Figure 5-8: Mark relationship Message: This is a many to many relationship. It is relationship between Employee and File. The relationship has been shown below.

Figure 5-9: Message relationship

docsity.com

28

5.3 FTS ERD The complete E-R diagram for FTS has been shown below:

Figure 5-10: FTS ERD

docsity.com

29

5.4 Relational Schema The Relational schema is derived from ERD. The entities in ERD become relations which will be represented as tables in database. The table name comes from entity name. The relationships in ERD are translated into tables directly [3]. Entities: Department (Dept_ID, Dept_Name, Office, Status) Employee (Emp_ID, Emp_Fname, Emp_Lname, Designation, Rank, Status, Dept_ID) File (File_ID, File_Name, File_Category, File_Type, Subject, Status, Text) Reference_Attachment (Ref_ID, Ref_Text, Ref_Name, Type, Size) Relationships: Mark (File_ID, Sender_ID, Ref_ID, Date, Time, Receiver_ID, Comments,Open) Message (File_ID, Sender_ID, Date, Time, Receiver_ID, Mesg_Txt, Type) Where Receiver_ID is the descriptive attribute that is inherits from Emp_ID that comes from Employee entity as a foreign key. As Create, Dept_Emp are the one-to-many relationships so we can’t create separate their tables but Dept_ID comes in the Employee entity as a foreign key. Underline attributes show primary key of entities and relationships.

5.5 Normalization Normalization is a process of identifying inconsistent, contradictory and incomplete state of database. In other words, it is a way to the database design. By following the principles of normalization, a highly flexible design has been achieved. FTS relational schema has been normalized till fourth normal form. Normalizing relational schema till 4th Normal form is sufficient because it guarantee that database will not face insertion, deletion or update anomalies. Step 1: A relation is in first normal form (1NF) if and only if every attribute is singlevalue for each tuple [3]. Relational schema of FTS is in 1NF as each cell in a row holds single-value.

docsity.com

30 Step 2: A relation is in second normal form (2NF) if and only if it is in first normal form and all the non key attributes are fully functionally dependent on the key. In relation R, attribute B of R is fully functional dependent on an attribute or set of attribute A of R if B is functionally dependent on A but not functionally dependent on any proper subset of A. If a relation in 1NF and the key consists of single attribute, the relation is automatically 2NF [3]. Therefore following tables are in 2NF: Department (Dept_ID, Dept_Name, Office, Status) Employee (Emp_ID, Emp_Fname, Emp_Lname, Office_PH, Designation, Rank, Email_Address, Home_PH, Status, Dept_ID) File (File_ID, File_Name, File_Category, File_Type, Subject, Status, Text) Reference_Attachment (Ref_ID, Ref_Text, Ref_Name, Type, Size) Mark (File_ID, Sender_ID, Ref_ID, Date, Time, Receiver_ID, Comments,Open) Message (File_ID, Sender_ID, Date, Time, Receiver_ID, Mesg_Txt, Type) Step 3: A relation is in third normal form (3NF) if it is in second normal form and no non-key attribute is transitively department on the key. A transitive dependency occurs when one non-key attribute determine another non-key attribute [4]. Following entities and relationships don’t have transitive dependency. Department (Dept_ID, Dept_Name, Office, Status) File (File_ID, File_Name, File_Category, File_Type, Subject, Status, Text) Reference_Attachment (Ref_ID, Ref_Text, Ref_Name, Type, Size) Mark (File_ID, Sender_ID, Ref_ID, Date, Time, Receiver_ID, Comments,Open) Message (File_ID, Sender_ID, Date, Time, Receiver_ID, Mesg_Txt, Type) Transitive dependency exists in Employee entity because from Designation can be known from Rank. Therefore Employee table is further split into two tables’ i.e. Employee and Desig_Rank. Employee (Emp_ID, Emp_Fname, Emp_Lname, Designation, Status, Dept_ID) Desig_Rank (Designation, Rank) Now, there is no transitive condition in above mentioned tables therefore all tables are in 3NF. Rank can be calculated from designation so there is no need to implement Desig_Rank table.

docsity.com

31 Step 4: A relation is in Boyce-Codd normal form (BCNF) if and only if every determinant is a candidate key [3]. All tables given below are in BCNF and not require further decompose it. Department (Dept_ID, Dept_Name, Office, Status) Employee (Emp_ID, Emp_Fname, Emp_Lname, Designation, Status, Dept_ID) File (File_ID, File_Name, File_Category, File_Type, Subject, Status, Text) Reference_Attachment (Ref_ID, Ref_Text, Ref_Name, Type, Size) Mark (File_ID, Sender_ID, Ref_ID, Date, Time, Receiver_ID, Comments, Open) Message (File_ID, Sender_ID, Date, Time, Receiver_ID, Mesg_Txt, Type)

5.6 Database Implementation The database has been implemented using My-SQL DBMS [4]. In order to write scripts, help has been taken from reference manual [6]. As an example, consider the following script to create department table in database: Use FTS; CREATE TABLE department ( dept_id:varchar(4), PK dept_name:varchar(45) office: char(4) status:varchar(15) All not null ); FTS is the name of database. The script used in My-SQL is slightly different form the script used in SQL server 2000. In order to create attributes, first their names are specified, then after colon their data types are specified. In order to connect My-SQL server with .Net Framework, Connector is required [5]. In order to establish connection with My-SQL, following steps must be followed: ƒ

Copy MySqlClient.dll into the bin folder of application directory.

docsity.com

32 ƒ

Then add its reference to the application. In order to do so, first open the

application in Visual Studio.Net. In the Solution Explorer, Right Click Add references, as shown if figure:

A

new

window

will

be

opened,

Browse

the

directory,

Select

MySql.Data.MySqlClient File and Click Ok. ƒ

In code behind (.vb) file write following statement to import library: Imports MySql.Data.MySqlClient

The connection string required is: Private

myCon

=

New

MySqlConnection("server=localhost;port=3307;



id=Nausheen; =mysql_fts;database=FTS; pooling=false;")

docsity.com

33

Chapter 6 File Initiation Build File initiation build includes design and implementation of FTS first main module i.e. File Initiation. The module has been further divided into three functionalities i.e. Create file, Mark file and Attach reference document. In this Chapter, detail design of all these functionalities present in this module, has been provided in the form of pseudo code. The graphical interfaces (GUI) have been presented as evidence that these sub modules have been implemented as well. Unit Testing has been also presented. Before starting design and implementation of this build, the FTS main interface has been designed. FTS main interface provides access to all other web pages present in the FTS.

Figure 6-1: FTS main page GUI

6.1 Create File Functionality Create file allow to create new files. In order to create a file, must specify information like file name, subject, category etc. FTS assigns unique Id to each file. Each file must have a unique name. The purpose of restricting to enter unique file name is that will be able to search file using file name.

docsity.com

34 A file has been further divided into two categories i.e. normal or notice. If category normal is selected, file can be marked to one person only. In case notice selects notice as a file category, file can be marked to more than one person. Pseudo Code The Pseudo code is given below: If clicks Create Button Open Connection Execute Command Assign unique file id to file Set status to “In Processing” Save file name Save selected file category Save selected file type Save subject Save text Close Connection End If GUI Figure 6-2 show Create file GUI.

Figure 6-2: Create file GUI

docsity.com

35 The Create File GUI provides following functionalities: File Name: File can be identified from file id and/or file name. The file name must be unique. File Category: The dropdown list allows Employee to select the category to which file belongs i.e. whether file is normal file or notice. File Type: The dropdown list allows employee to select file type i.e. whether file is public or confidential or private. Department: Allow to select the department present in organization. According to the selected department, list of employees in the Mark To dropdown list is displayed. Mark To: Allow to select person to whom file is to be marked. Subject: can enter subject of File. Text: Allow to enter the text. Check Name Button: As mentioned earlier, file name must be unique. The Button “Check Name” provides facility to check whether the entered name is unique or not. Create File Button: Creates file in database. Cancel Button: Redirects control to FTS main page Attach Button: Enable to attach reference document. Send to Multiples: Allow to send file to more than one person Create File Test Cases The few test cases for this functionality are given below: Test Case 1: File name There are few steps involved in this test. a. Enter unique “File name” b. Click at “Check Name” button c. File Name is unique If file name text field is empty then it will display the message to . Enter File name.

docsity.com

36 If file name text field is not empty then file name from the database by matching with the names of already existing files. If it matches, there will be message displayed to the . This File name is already exists. Otherwise message displayed to the is “File name is unique” and this message allow to mark newly created file to particular employees. Test Case 2: Notice File having type notice is only allowed to mark more then one employee. To test this test case following steps are involved. a. Chose file category “Notice” b. Click at the “Send to Multiples” link c. it is file type is notice d. Add multiple peoples in new dropdown list from the dropdown list of employees If file type is not notice then there will be message displayed to the . Notice can only send to multiple people. Otherwise a new empty dropdown list with an “Add” button to add employees from the “Mark to” dropdown list. If after adding change file type then dropdown list to send file to more then one employee will be empty and disappear. So if again change file category as “Notice” and click it “Send to Multiples” link, an empty dropdown list with an “Add” button will appear.

6.2 Mark File Functionality By marking file means transferring file to other person for processing. When a file is marked, it is sent to other person(s) for further processing. The person who marked file is not able to view file or attach reference document or add comments after marking file. When a file is marked first time, no comments can be added in the file. Pseudo Code If clicks Mark Button Open Connection Execute Command Save File Id, Sender ID, Receiver ID, Current Date & time in Database

docsity.com

37 Set "no comments" in the Comments Field in database Close connection End If

6.3 Attach Reference Document functionality Functionality “Attach Reference Document” allow to attach reference document along with the file. The functionality enables to send additional information with the file. The reference document is stored in database in binary form. As a result, image, document or PDF can be attached with a file. can attach reference document from his/her PC hard disk. In order to implement this functionality, System.IO has been imported in VB code. Pseudo Code If selects reference document and clicks Attach Button Get Reference Document path Get Reference Document size If Reference Document size > 0 then Allocate Buffer for reading Reference Document Read contents of Reference Document from the stream and write in Buffer Create Adapter Create and Initialize Command Builder Open Connection and Create New Dataset Populate Dataset with information related to Reference Document and its contents Update Data Source Close connection End If Else Display error message Else Display error message “Select File to be attached” End If

docsity.com

38 GUI The GUI for attaching reference document has been shown below:

Figure 6-3: Attach reference document GUI The GUI provides following functionalities: Browse Button: This is an html control called “Input File” and allow to browse files present on the hard disk. Button: File is ed in database using Button. Attach Reference Document Test Case This test case involves following steps a. Browse directory to select reference document b. reference document c. Verity reference document size d. Redirect to specific web page If “” button is clicked and reference document path is empty then there will display the message to the . Select reference document from the data drive. If document path is given to store it in the database then its size. If size is zero then message will be displayed to the is File can’t ; File size is equal to zero. Otherwise a unique attachment ID is allotted to reference document and stored in the binary format in the database.

docsity.com

39

Chapter 7 File Processing Build The Chapter throws light on design, implementation and integration of functionalities like add comments, close file, view file, request file and reactivate file. The FTS second main module i.e. File Processing has been defined completely in this Chapter.

7.1 Add Comments Functionality Once a file is receive for processing, the currently responsible person can add comments in it. Comments specify personal opinion or the action that must be taken. Pseudo Code The Pseudo code has been given below: If Page loads Open Connection with database Execute Reader Retrieve File Id and Display it Retrieve File Name and Display it Retrieve Subject and Display it Retrieve File Category and Display it Retrieve File Type and Display it Retrieve Date & Time and Display it Retrieve Previous Comments and Display them Close Reader Close Connection End If If Employee enters new comments and clicks Add Comments Button Open Connection with database Execute Command Save File Id, Sender Id, Receiver Id, Date & time, new comments in database Close Reader Close Connection

docsity.com

40 End If GUI The Add Comments GUI has been shown below:

Figure 7-1: Add comments GUI

7.2 Close File Functionality When a file is close, comments can’t be added until it is reactivated. By closing file means terminate the processing on file. The file status is changed when a file is closed. The closed files are not deleted from database. Pseudo Code If Employee checks "Close file” check box Open Connection with database Execute Command Set File Status “Closed" in File table in database Close connection

docsity.com

41 End If Close File test Case This functionality allow to change the status of file as “Closed”. This test case involves following steps: a. Click at “Add comments and Send” Button b. Closed status is checked c. Sender designation is head of department (HOD) d. Add comments e. Change file status f. Send File to the responsible person If “File Closed” checkbox is checked and sender designation is not “HOD” then there will be the message displayed to the sender. You haven’t rights to ‘Close the File’. Otherwise file status is updated as “Closed” and successfully marked to originator.

7.3 View File Functionality can view information about file like file id, name, type, category etc. The list of attached reference documents with the particular is also shown. The options to add comments and view attachments are also available to open file. Pseudo Code If Page loads Open Connection with database and Execute Reader Retrieve File Id and Display it Retrieve File Name and Display it Retrieve Subject and Display it Retrieve File Category and Display it Retrieve File Type and Display it Retrieve Date & Time and Display it Retrieve Previous Comments and Display them Close Reader Close Connection

docsity.com

42 End If GUI The View File GUI has been shown below:

Figure 7-2: View file GUI View File Test Case This test case following cases, If hasn’t select the File ID and click at the view file buttons then there will be message displayed to the . Select File ID if any File ID exists Otherwise is directed to “View File” web page. If file status is closed then can only view file and its comments on its. If clicked to add comments, there will be message displayed to the . File status is closed; you can’t add comments at this file. If file status is not closed then is redirected to add comments web page.

7.4 Request File Functionality Request can be of two types either File Request or Reactivation Request. File Request can be made only by Head. As Head can send File Request therefore he can’t send reactivation request. Other Employees can send reactivation request to Head but they can directly request a file. The difference between request file and reactivation request is that file request means that file must be marked to the requesting person. While reactivation request means that an employee wants to reactivate a closed file. As Head has right to

docsity.com

43 reactivate file so the reactivation request will be sent to Head. The File Request can be sent to employees present in an organization. Request File Pseudo Code If Employee’s Designation is Head Open Connection with database Execute Command Save selected File Id Save Sender and Receiver Id If there is no text message Set Text field in database equal to "No Message" Else Set Reminder Text field in database to the message written by Employee in textbox End If Set Type field to “File Request” Save Current Date and Time Close Connection Display Message “File Request sent to Current Responsible Person” Else Display message “You don’t have right to request file” End If Send File Reactivate Request Pseudo Code If Employee’s Designation is not Head Open Connection with database Execute Command Save selected File Id Save Sender and Receiver Id If there is no text message Set Text field in database equal to "No Message" Else

docsity.com

44 Set Reminder Text field in database to the message written by Employee in textbox End If Set Type field to “Reactivation Request” Save Current Date and Time Close Connection Display Message “Reactivation Request sent to Current Responsible Person” Else Display message “You can’t send file reactivation request” End If GUI Figure 7-3 shows the Request file GUI.

Figure 7-3: Request file GUI Request File Test Case There are two types of requests that can do, Request a file and File reactivation request. This test case involves following steps: a. Click a link “File request” or “Reactivation request” b. request eligibility constraint through designation c. Send request to responsible person If click at the “File request” link and its designation is not “HOD” then there will be message displayed to the . You don’t have rights to request a file

docsity.com

45 If designation is “HOD” list of files will be visible to the to which can send a file request to currently responsible person. If head of department click at the “Reactivation request” link then the message will be displayed to him. You don’t have rights to request ‘Reactivate file’. If is not head of department then list of files having status “Closed” will be visible to the for which he/she can send a file reactivation request to the head of department.

7.5 Reactivate File Functionality When a file is completely processed, it is closed. But a close file can be reactivated later. Only Head have authority to reactivate closed files. Pseudo Code If Employee selects a file and clicks Reactivate Button Open Connection with database Execute Reader Update status of file Send Reactivation Request Approval Message Close Connection Else If Employee selects a file and clicks Deny Button Open Connection with database Execute Reader Update status of file Send Reactivation Request Denial Message Close Connection End If GUI Figure 7-4 shows Reactivate File GUI.

docsity.com

46

Figure 7-4: Reactivate file GUI Reactivate File Test Case This web page can only view by head of department otherwise the message will be displayed to the . You don’t have rights to visit ‘Reactivate File’ webpage. If designation is “HOD” then is redirected to “Reactivate File” web page. And can see reactivation file request messages and whether deny or accept request actions can take place successfully. If haven’t select the File ID and click at the view request message or deny or reactivate buttons then there will be message displayed to the . Select File ID if any File ID exists

docsity.com

47

Chapter 8 File Tracking Build The chapter throws light on design and implementation of module File Tracking. The module further consists of track file, view history, send reminder, view personal and edit database information functionalities.

8.1 Track File Functionality File Processing can be traced using the file Id or file name. The functionality allow to locate where file is currently being processed. Only one entry is displayed that shows who is processing file at that time. Figure 8-1 shows flow chart for tracking file.

Figure 8-1: Track file flow chart

docsity.com

48 GUI The GUI has been shown below:

Figure 8-2: Track file GUI Track File Test Case: File ID or File name is used to track the current location of file. In this test case following steps are involved. a. Enter File ID or File name b. File ID or File name c. Display current location If File ID and File name, both text fields are empty then there will be message displayed to the . Enter File ID or File name. If test fields are not empty then File ID or File name. If it is not matched then the message displayed to the will be This File name or File ID is incorrect. If File name or File ID is matched then current Location of file will be displayed to the .

8.2 View History Functionality The functionality allow to view history of file processing i.e. who has processed the file and when. Information related to file id, sender id, receiver id, comments and date and time are displayed. Flowchart is shown below:

docsity.com

49

Figure 8-3: View history flow chart GUI The GUI for Viewing file history has been shown below:

Figure 8-4: View history GUI View History Test Case: File ID or File name is used to view the File processing history. In this test case following steps are involved. a. Enter File ID or File name b. File ID or File name c. Display complete File History

docsity.com

50

If File ID and File name, both text fields are empty then there will be message displayed to the . Enter File ID or File name. If test fields are not empty then File ID or File name. If it is not matched then the message displayed to the will be This File name or File ID is incorrect. If File name or File ID is matched then processing history of file will be displayed to the .

8.3 Send Reminder The purpose of this functionality is to enable employee to remind other employees if they have to process files and they are not doing so. Always currently responsible person will receive reminder. The Reminder can be sent by file owner, previously responsible persons or by Head. The Reminder may or may not include message from the sender. Pseudo Code Get Current File Location If Employee clicks Send Button and Receiver Id is not equal to Sender Id Open Connection with database Execute Command Save File Id Save Sender and Receiver Id If there is no text message Set Text field in database equal to "No Message" Else Set Text field in database to the message written by Employee in textbox End If Set Type field to “Reminder” Save Current Date and Time Close Connection Display Message “Reminder sent to Current Responsible Person”

docsity.com

51 Else Display message “You can't send reminder to yourself” End If GUI Employee has to select File Id and Name displayed in a dropdown list. He/She can also write message. Send Button finally sends reminder to the current responsible person. Figure 8-1 shows Send Reminder GUI.

Figure 8-5: Send Reminder GUI Send Reminder Test Case This test case verifies that can’t send reminder to itself. If select file of which he/she is currently responsible, then the message will be displayed to the . You can’t send reminder to yourself; you are currently responsible to this file Otherwise, message is successfully send to currently responsible person.

8.4 Generate and View Alert Functionality File alerts are generated whenever a file gets mark. The purpose of this functionality is to inform that a file has been marked to him/her for processing. The popup window for alert has been generated by using control provided in Eeeksoft Namespace [8]. The EeekSoft Namespace must be imported in the VB code file. Also reference of its dll file

docsity.com

52 must be added to the application’s bin directory after copying that file to the bin directory of application folder. In addition to this following line must be included in the .aspx code. <%@ TagPrefix="cc1" Namespace="EeekSoft.Web" Assembly="EeekSoft.Web.PopupWin" %>

The advantage of using this namespace is that it provides facility of using popup window as control like html control and web controls. Moreover, its attributes like color, position, visible, action etc. can be also defined easily. The code to generate the alert, show count of alerts received and certain other actions was written in order to use this control in this software. Pseudo Code to Generate Alert Create and Initialize Command Builder Create and Initialize Reader Create Counter and Initialize it with zero Open Connection with database Execute Reader While Reader reads from database Counter = Counter + 1 Loop Close Reader Close Connection Set popup window Action Type as Open Link and Set the Path Link Set popup window Title Set popup window Message to display the numbers of alerts received Set popup window Hide After property to 10000 Set popup window property visible as true Pseudo Code to View Received Alerts If Page is not posted back then Clear List Create and Initialize Command Builder Open Connection with database Create and Initialize Reader Do While Reader Reads

docsity.com

53 Create item of type Radio Button List Assign File Id as read by Reader Add item to list Loop Close Reader Get Dataset Bind Dataset End If GUI The GUI showing the Alert pop up window has been shown below:

Figure 8-6: Alert pop up window

Figure 8-7: Received alerts GUI

8.5 View Personal The Personal lists down all files that have been created or ever processed by an Employee. The sole purpose of this functionality is to help employee in ing the File Ids and File Names. Pseudo Code When Page loads Create Dataset Open Connection

docsity.com

54 Create and initialize Command Create Adapter Fill Dataset from File table and Mark table on the basis on Employee Id Bind Data Grid with Dataset GUI The GUI for Personal has been shown below:

Figure 8-8: View personal GUI

docsity.com

55

Chapter 9 FTS Security Build The Chapter explains security module in detail. The module consists of Sign In, Sign Out and Edit Database information functionalities. The module is named as security because all three functionalities are important from security point of view. Functionality sign in and sign out prevent illegal access to system information while editing functionality controls direct interaction with the database.

9.1 Sign In Functionality Each Employee of an organization using File Tracking System will have unique id and . Every time employee wants to signs in FTS, he/she has to enter the id and . Only employee who has entered correct employee id and is able to view FTS main page. Access is denied incase employee id or or both are invalid. Every time id and is verified from the database server. Pseudo Code The Pseudo code is given below: Open Connection Execute Reader Compare Id and entered by with the one present in database If match Redirect control to "Home Page" Else Display error message "Incorrect Employee Id or " End If Close the Reader and Close Connection GUI The Sign in GUI has been shown in Figure 9-1: Sign In GUI.

Figure 9-1: Sign In GUI

docsity.com

56 The GUI has the following functionalities: a. Button: Allows employee to access system after ing Employee Id and . b. Close Window Button: Closes the Authentication Browser. c. Employee Id Textbox: Employee enters his/her Id in this textbox. Field: Employee enters his/her . Unit Testing It is used to the Employee ID and . The following steps are involved in the testing. a. Enter Employee ID b. Enter c. ing Employee ID and d. Redirect to “Home Page” If Employee ID or not entered or does not match the message “Incorrect Employee ID or ” will be displayed to the . If Employee ID and matched then is redirected to “Home Page” and store the Employee ID in the session state for accessing the Employee ID in specific pages.

9.2 Sign Out Functionality The Sign out functionality is present on all web pages except the Authentication web page. It allows Employee to end session. Pseudo Code If Employee clicks Sign out button Clear Session Redirect control to Authentication Page End If

9.3 Edit Database Information having istrative rights can edit information related to department or an employee. He can create new departments as well. The FTS main page for displays extra options when an signs in.

docsity.com

57 Create new department Pseudo Code If Dept. Id = "" Or Dept. Name = "" Or Dept. Office = "" Then Display message “Enter values in empty text fields" Else If Office number already exists in database then Display message “Allot another office" Else Open Connection with database Execute Command Insert Dept. Id, Dept. Name, Dept. Office and Status in Department’s Table Close Connection Display message "New Department has been created successfully." End If Edit information related to a Department Pseudo Code Get and Fill Departments list Get data of selected Department If Employee clicks Update Button Open Connection with database Execute Command Update information in Department Table Close Connection Else If Employee clicks Change Status Button Open Connection with database Execute Command Update status to “Not Exists” Close Connection Edit information related to an Employee Pseudo Code If Employee clicks Create New Button/ Update Button If Employee id= "" or employee Name = "" or Designation= "" or = "" or Department’s id = "" Then Display Message “Enter values in mandatory text fields highlighted by (*)" Else If Department’s id = "" Then

docsity.com

58 Display Message “Enter Correct Department ID." Else Open Connection with database Execute Command Insert/Update information in Employee Table in database Display Message “New Employee Record is inserted successfully” Close Connection End If GUI

Figure 9-2: Edit employee information GUI

Figure 9-3: Create new department GUI

docsity.com

59

Figure 9-4: Edit department information GUI Create New Department Test Case This web page is only visible to the . This test case involves following steps: a. Enter Department Name, ID, and Office b. entered data c. Saved in the database If any of text field is empty, message will be displayed to the . Enter values in the empty text fields. Department ID should be unique otherwise the message will be displayed to the . Department ID already exist Two departments can’t have same office otherwise message will be displayed to the . This office no. is already allotted to specific department. Edit Department Info Test Case This web page is also only visible to . can change the office no. allotted to specific department. Two departments can’t have same office otherwise message will be displayed to the . This office no. is already allotted to specific department. can also change the status of department “Not Exist”. Department status can any change if no employee belong to that department otherwise message will be displayed to the . N employees belong to this department, so status of department can’t change

docsity.com

60 Where N denotes the no. of employees belong to specific department. If N=0 then department status will be changed successfully and disappear to the List of existing departments. Edit Employee Info Test Case In this test case following steps involves. a. Select employee from drop down list b. Employee Info will displayed c. Update data d. Employee ID, First name, Designation, and Department ID to which he/she belong If there is no employee in the department message will be displayed to the . There is no employee in this department. If wants to add new employee, then data should be entered by the in the mandatory text fields i.e. Employee ID, First name, Designation, and Department ID otherwise message will be displayed to the . Enter values in mandatory text fields high light by (*). If employee update the employee info then the employee ID can’t update, otherwise message will be displayed. Selected Employee ID can't change but Remaining Info is Updated. can also change the status of employee “Not Exist”. After change the status employee info will be disappear from the existing employee list. If wants to change the department ID for a specific employee, then department ID already exists otherwise message will be displayed. Enter Correct Department ID. Otherwise employee info will successfully update.

docsity.com

61

Chapter 10 System Testing System Testing consists of series of different tests performed to that the system elements have been integrated properly and are functioning correctly. System testing is crucial in order to guarantee system reliability. System testing is a higher level testing and its sole purpose is to deliver quality product. System testing can be further divided into Performance testing, Stress testing, Security testing and Recovery testing [11]. The Chapter provides details about these system testing techniques and the test cases that have performed in order to ensure the quality and reliability of system. The tools that have been used to conduct test cases also have been mentioned in this Chapter.

10.1 Performance Testing The purpose of performance testing is to analyze the run-time performance of system [11]. The system performance can be measured with the help of different tools that simulate the heavy load. The Application Center Test (ACT) that is present by default in VB .NET is an example of such a tool. FTS performance tests have been performed by using ACT.

10.1.1 Graphs Generated by ACT for FTS This test has been performed by increasing the number of s, which can interact with FTS simultaneously. Results from different test reports are superimposed on a single graph, making it possible to view the changes in performance of FTS. Five reports have been generated using 5, 10, 15, 20 and 25 simultaneous browser connections. a) Graph-1: Connection versus Request per Second This graph is useful, when trying to determine the maximum number of requests per second that can be handled by web server at a time. On X-axis, numbers of connections have been shown while on Y-axis Requests per second have been shown. As shown in Figure: 10-1, the graph is going upward which indicates that on increasing connections, the number of requests that can be entertained is also increasing without making the system crash.

docsity.com

62

Figure 10-1: Connection vs. requests per second b) Graph-2: Connection versus Time to Serve the Last Byte(TTLB) This graph is useful, when trying to determine how much performance decreases when the number of simultaneous connections increases.

Figure 10-2: Connections vs. TTLB

docsity.com

63

10.1.2 Tests Report Generated by ACT for FTS Tests report provides some of the performance data of the test run, such as requests per second that the web server was able to handle, as well as the duration of the test and the total number of requests sent. Table 10-1: Performance tests report

docsity.com

64

10.2 Stress Testing In stress testing, the tester tries to devastate the system. Different tests are designed that requires resources in abnormal quantity, frequency, or volume in order to execute. Stress testing can be performed by increasing interrupts per second or increasing input data rates or maximizing usage of memory and other resources in such a way that leads to memory management problems [11].

10.3 Security Testing Security testing confirms that system is not vulnerable for improper penetration or illegal access. In order to perform security testing, test cases are designed in which tester try to acquire by using a software or technique. The system must be secured enough to guarantee that penetration cost is more than the value of information that will be acquired [11].

10.4 Recovery Testing Recovery testing is performed to ensure that in case failure occurs in the system, it will be recovered within a pre specified time. Different test cases are designed that force system to fail in variety of ways. System can be recovered in two ways i.e. automatic recovery or manual recovery. In case system recovers automatically, tests are performed to analyze parameters like recovery time, re initialization, amount of data recovered etc. If recovery is manual, tests are performed to determine acceptable limits which are calculated from mean time to repair (MTTR).

docsity.com

65

Chapter 11 Conclusion The design and implementation of File Tracking System had been a challenging and exigent task. But eventually day and night effort and hard work have resulted in fully functional software product named as File Tracking System.

11.1FTS Navigation Map The FTS Navigation Map has been shown below:

HomePage

Create File

Track File

View History

Add Attachment

SignOut

View Alerts & Reminders

Reactivate File

Personal

Current Location

Add Comments

View File

View Attachment

View Attachment

Related Pages

SignOut

Figure 11-1: FTS navigation map In the figure shown above, the main web page is named as Home Page. Other web pages are (Sign In), Create File, Track File, View Alerts and Reminders, Reactivate File, Personal , Add Attachment, Add Comments, View File and View Attachment.

docsity.com

66 “View History” and “Current Location” are components of web page “Track File”. “View Attachment” is the component of “View File” web page. Sign Out is the component of all web pages shown in figure except the page. Component represents a functionality for which separate web page is not being implemented. The lines show the possible navigation paths from one web page to another.

11.2 Application File Tracking System has applications in organizations which rely on files for all official activities especially government organizations where files are moved and processed on a large scale. It can be used in educational institutes, hospitals, and private as well as government offices. File Tracking System can be implemented in PIEAS. It can be helpful in speeding up the processes in s and Procurement departments. Only restriction is that organization must have LAN (Local Area Network) in order to use this software product. The interfaces have been designed in a way that it does not require to be a computer expert in order to use this software product. File Tracking System not only provides benefit of time saving but also provides solution to the problems faced in traditional system like file lost. In short File Tracking System is a worthwhile software product. File Tracking System can be implemented in different organizations after slight changes. In that case there will be no need to design and implement the whole system.

11.3 Future Recommendations File Tracking System provides almost all essential functionalities which may be required by an organization but still there is room for future enhancements. Improvements can be made in Interfaces. Different encryption techniques may be introduced. Digital Signatures may be used while marking file. More advance options can be introduction of formatting tool for sending requests. Printing facility may also be included. Another difficult enhancement may be that employees will be able to receive alerts on mobile phone.

docsity.com

67

References [1]

Microsoft Share Point [Online] Available: http://office.microsoft.com/en-us/sharepointserver/FX100492001033.aspx

[2]

Matthew MacDonald, The Complete Reference ASP.NET, McGraw-Hill/Osborne: California, USA, 2002

[3]

Catherine Ricardo, Database Systems Principles, Design, and Implementation, Maxwell Macmillan: Iona College, New Rochelle, New York, p.59, p.148, p.209, p.223.

[4]

MySQL 5.0 – [Online] Available: http://dev.mysql.com/s/mysql/5.0.html

[5]

MySQL Connector/Net 1.0 – [Online] Available: http://dev.mysql.com/s/connector/net/1.0.html

[6]

MySQL Documentation – [Online] Available: http://dev.mysql.com/doc/

[7]

Ivan Bay Ross, Web Enabled Commercial Application Development Using HTML, DHTML, JavaScript, Perl CGI, 2nd Revised Edition, BPB Publications, 2000: New Delhi

[8]

ASP.Net Popup Control – [Online] Available: http://www.codeproject.com/aspnet/asppopup.asp

[9]

Multi Tier Architecture – [Online] Available: http://en.wikipedia.org/wiki/Three-tier_(computing)

[10] Unit Testing, Microsoft Corporation, [Online], Available: http://msdn2.microsoft.com/en-us/library/aa292197(VS.71).aspx [11] Roger S. Pressman, Software Engineering, Sixth Edition, Pressman, p.80, p.408, p.409, p.410.

docsity.com

68

Appendices A. Abbreviations Table A- 1: List of abbreviations ABBREVIATION

MEANINGS Active Server Pages Entity Relationship Diagram Function Points File Tracking System Foreign Key Graphical Interface

ASP ERD FP FTS FK GUI HTML

Hyper Text Markup Language

IIS LAN NF PC PK RDBMS

Internet Information Services Local Area Network Normal Form Personal Computer Primary Key Relational Database Management System

SQL

Structured Query Language

B. Definitions Table A- 2: and their meanings

TERM Browser

DEFINITION Relative to the Internet, the web browser is a client program that requests services from the web server. Clients can locate the appropriate Server and interact with it using browser.

docsity.com

69

TERM Client

DEFINITION A computer program that makes a service request from server.

Relational Database

RDBMS manages and stores data repository in the

Management

form of tables and also store relationship among

System (RDBMS)

them.

Database server

A server that hosts one or more databases. All data manipulation commands are executed at this server.

Distributed System

A system in which components are distributed across multiple locations and computer networks.

HTML

Programming

language

used

mostly

for

programming the presentation layer

Information

Data that has been processed or reorganized into a more meaningful form for someone.

Internet

An interconnected system of networks that connects computers around the world via the T/IP protocol. The Internet is the largest internet (with a small "i") in the world.

Intranet

Any network which provides similar services within an organization to those provided by the Internet outside it but which is not necessarily connected to the Internet.

Information System

An arrangement of people, data, processes, and information technology that interact to collect, process,

store,

and

provide

as

output

the

information needed to an organization.

docsity.com

70

TERM

DEFINITION

Local Area Network

A set of client computers (PCs) connected over a

(LAN)

relatively short distance to one or more servers.

Server

It is a computer program that fulfills the request made by the client.

SQL

Universal standard language for database manipulation

s

A “customer” who will use or is affected by an information system on a regular basis – capturing, validating, entering, responding to, storing, and exchanging data and information.

Web

"A web" is part of it on some specific website.

Web Page

A block of data available on the World-Wide Web, identified by a URL. In the simplest, most common case, a web page is a file written in HTML, stored on the server.

Web Server

Special software that runs on server is called Web Server. It allows the servers to respond to the clients for information or accepts data from the clients.

Web Site

(Or "website") Any computer on the Internet running a World-Wide Web server process. A particular website is usually identified by the hostname part of a URL.

docsity.com

71

C. Database Tables The attributes of tables that have been implemented for FTS are given below:

C.1 Department Table Table C- 1: Department table Attribute Name

Data Type

Not Null

Purpose

dept_id (PK)

varchar(4)

Yes

Stores department id

dept_name

varchar(45)

Yes

Stores department name

office

char(4)

Yes

Stores department office number

status

varchar(15)

Yes

Stores information that the department exists or not.

C.2 Employee Table Table C- 2: Employee table Attribute Name

Data Type

Not Null

Purpose

emp_id (PK)

char(15)

Yes

Stores employee id



varchar(10)

Yes

Stores

emp_fname

varchar(15)

Yes

Stores employee first name

emp_lname

varchar(15)

office_ph

char(4)

Default Null Stores department office number

home_ph

varchar(15)

Default Null Stores employee home phone no.

designation

varchar(10)

Default Null Stores designation like Junior

Default Null Stores employee second name

Scientist. email_address

varchar(40)

No

Stores email address

dept_id (FK)

varchar(4)

Yes

Stores department id to which employee belongs. The id comes from department table.

status

tinyint(1)

Yes

Stores information that the employee is organization member or not in the form of 1 or 0.

docsity.com

72

C.3 File Table Table C- 3: File table Attribute Name

Data Type

Not Null

Purpose

file_id (PK)

varchar(100)

Yes

Stores file id

file_name

varchar(100)

Yes

Stores file name

file_category

varchar(10)

Yes

Stores file category e.g. notice

file_type

varchar(20)

Yes

Stores information that the department exists or not

subject

varchar(100)

Yes

Stores file subject

status

varchar(30)

Yes

Stores file status e.g. closed

text

medium text

Yes

Stores original file contents

C.4 Reference Attachment Table Table C- 4: Reference attachment table Attribute Name

Data Type

Not Null

Purpose

ref_id (PK)

varchar(100)

Yes

Stores reference id

ref_text

MEDIUMBLOB

Yes

Stores reference document contents

ref_name

varchar(100)

Yes

Stores reference document name

type

varchar(30)

Yes

Stores reference document extension e.g. .doc

size

integer

Yes

Stores reference document size

C.5 Mark Table Table C- 5: Mark table Attribute Name

Data Type

Not Null

file_id (PK, FK)

varchar(100)

Yes

Purpose Stores file id, comes from file table

docsity.com

73 sender_id (PK, FK)

varchar(15)

Yes

Stores (sender’s) employee id, comes from employee table

receiver_id (FK)

varchar(15)

Yes

Stores (receiver’s) employee id, comes from employee table

ref_id (PK, FK)

varchar(100)

Yes

Stores reference id, comes from reference attachment table

date_and_time

varchar(50)

Yes

Stores date and time

comments

tinytext

Yes

Store comments

open

boolean

Default

(PK)

Zero

If receiver opens file, open is set to 1.

C.6 Message Table Table C- 6: Message table Attribute Name

Data Type

Not Null

file_id (PK, FK)

varchar(100)

Yes

Purpose Stores file id, comes from file table

sender_id (PK, FK)

varchar(15)

Yes

Stores (sender’s) employee id, comes from employee table

receiver_id (FK)

varchar(15)

Yes

Stores (receiver’s) employee id, comes from employee table

mesg_txt

tinytext

No

Stores message

type

varchar(25)

Yes

Type specify whether is reminder or request etc.

date_and_time

varchar(50)

Yes

Stores Date and Time

(PK)

docsity.com