Exp 09 Three Terminal Voltage Regulator Using Ic 7805 And 7912(2) 341l5d
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 2z6p3t
Overview 5o1f4z
& View Exp 09 Three Terminal Voltage Regulator Using Ic 7805 And 7912(2) as PDF for free.
More details 6z3438
- Words: 379
- Pages: 3
ECE Department – ICA LAB Experiment No: 9
II/IV CSE & IT (I Semester)
Page 1 of 3
Three terminal voltage regulators using IC 7805 and 7912 Aim: To the three terminal regulators using IC 7805 and 7912. Apparatus: 1. 2. 3. 4.
Voltage Regulator trainer kit Oscilloscope Digital multimeter Connecting patch chords
Circuit description: The IC 723 is a monolithic integrated circuit voltage regulator featuring high ripple rejection, excellent input and load regulation, excellent temperature stability etc., It consists of a temperature compensating reference voltage amplifier, an error amplifier, 150mA output transistor and an adjustable output current limiter. The basic low voltage regulator type 723 circuit is shown in fig (1). The unregulated input voltage is 24V and the regulated output voltage is from 0.2V to 7.3V by varying POTR. RSC (R1) is connected across current sense (CS) and current limit (CL) terminals to limit the accidental short circuit current. A stabilizing capacitor (C1) of 100 pF is connected between frequency compensation terminal and inverting (INV) terminal. External NPN transistor is added to the basic 723-regulator circuit to increase its load current capability. The output voltage can be regulated from 7 to 37 Volts for an input voltage range from 9.5 to 40Volts. For intermediate output voltages the following formula can be used R′ + R2′ Vout = 1 XVref R2 The resistor values R1′ & R2′ are calculated from potential divider network® .
ECE Department – ICA LAB Experiment No: 9
II/IV CSE & IT (I Semester)
Page 2 of 3
Procedure: 1. Connect the circuit diagram as shown in figure. 2. Measure the output of the regulated power supply that is 0 to +40 and 0 to -40 V using digital multimeter. Fixed voltage regulators 7805 (+5 V) 3. Connect the circuit as shown in figure to observe the line regulation.
4. By varying Vin supply in steps measure the corresponding output Vo and record in a tabulated form as shown below.
5. Plot the graph between Vin, Vo and observe the line regulation.
ECE Department – ICA LAB Experiment No: 9 7912 (-12 V)
II/IV CSE & IT (I Semester)
Page 3 of 3
6. Connect the circuit as shown in below figure for line regulation. 7. Repeat steps 4 and 5.
Result:
II/IV CSE & IT (I Semester)
Page 1 of 3
Three terminal voltage regulators using IC 7805 and 7912 Aim: To the three terminal regulators using IC 7805 and 7912. Apparatus: 1. 2. 3. 4.
Voltage Regulator trainer kit Oscilloscope Digital multimeter Connecting patch chords
Circuit description: The IC 723 is a monolithic integrated circuit voltage regulator featuring high ripple rejection, excellent input and load regulation, excellent temperature stability etc., It consists of a temperature compensating reference voltage amplifier, an error amplifier, 150mA output transistor and an adjustable output current limiter. The basic low voltage regulator type 723 circuit is shown in fig (1). The unregulated input voltage is 24V and the regulated output voltage is from 0.2V to 7.3V by varying POTR. RSC (R1) is connected across current sense (CS) and current limit (CL) terminals to limit the accidental short circuit current. A stabilizing capacitor (C1) of 100 pF is connected between frequency compensation terminal and inverting (INV) terminal. External NPN transistor is added to the basic 723-regulator circuit to increase its load current capability. The output voltage can be regulated from 7 to 37 Volts for an input voltage range from 9.5 to 40Volts. For intermediate output voltages the following formula can be used R′ + R2′ Vout = 1 XVref R2 The resistor values R1′ & R2′ are calculated from potential divider network® .
ECE Department – ICA LAB Experiment No: 9
II/IV CSE & IT (I Semester)
Page 2 of 3
Procedure: 1. Connect the circuit diagram as shown in figure. 2. Measure the output of the regulated power supply that is 0 to +40 and 0 to -40 V using digital multimeter. Fixed voltage regulators 7805 (+5 V) 3. Connect the circuit as shown in figure to observe the line regulation.
4. By varying Vin supply in steps measure the corresponding output Vo and record in a tabulated form as shown below.
5. Plot the graph between Vin, Vo and observe the line regulation.
ECE Department – ICA LAB Experiment No: 9 7912 (-12 V)
II/IV CSE & IT (I Semester)
Page 3 of 3
6. Connect the circuit as shown in below figure for line regulation. 7. Repeat steps 4 and 5.
Result:
Related Documents c2h70
Exp 09 Three Terminal Voltage Regulator Using Ic 7805 And 7912(2) 341l5d
November 2019 40
Exp 11 Voltage Regulator Using Ic 723 4i1m1w
October 2019 63
Regulator Ic 7805 Dan 7812 241j64
November 2019 69
5v Power Supply Using 7805 Voltage Regulator With Design f5c1b
November 2019 64
Voltage Regulator 5j2h31
December 2019 62
Automatic Voltage Regulator 4g2o2q
September 2022 0More Documents from "Ketan Jariwala" 5n2f2n
Exp 09 Three Terminal Voltage Regulator Using Ic 7805 And 7912(2) 341l5d
November 2019 40
Convocurrent.gtu.ac.in Convocation 4o6h65
December 2019 77
Alcohol By Volume 4543
March 2023 0
Ml3 Eia Report 6qx1w
November 2019 46
Nexa Final 2j6d1d
July 2022 0