Class 12 Physics Project File 6c252o

PHYSICS INVESTIGAT ORY PROJECT TOPIC: TO CONSTRUCT AN AUTOMATIC NIGHT LAMP USING A TRANSISTOR AND LDR MADE BY:

Adhish Anand

CLASS - XII-B GUIDED BY— Kalpana Ma’am

PHYSICS PROJECT | ADHISH ANAND

BOARD ROLL NO. —

CERTIFICATE This is to certify that Adhish Anand, student of class XII-B has successfully completed the Physics Project under the guidance of — Ms. Kalpana. This project is genuine and is not plagiarism of any kind. The references used in making this project file are declared at the end of the file. External’s Class In-Charge Sign:

Sign: P a g e 2 | 22

PHYSICS PROJECT | ADHISH ANAND

______________ _____________

ACKNOWLEDGEM ENT I wish to express my deep gratitude and sincere thanks to the Principal, Capt. Sanjay Anand, Doon Public School, Panchkula for his encouragement and for all the facilities he has provided for this project work. P a g e 3 | 22

PHYSICS PROJECT | ADHISH ANAND

I extend my hearty thanks to my subject teacher Ms. Kalpana and Lab Assistant Ms. Pratima who guided me to the successful completion of this project. I take this opportunity to express my deep sense of gratitude for their invaluable guidance, constant encouragement and immense motivation which has sustained my efforts at all stages of this project work. I can’t forget to offer my sincere thanks to my classmates who helped me to carry out this project work successfully and for their valuable advice and which I received for them time to time.

P a g e 4 | 22

PHYSICS PROJECT | ADHISH ANAND

INDEX Sr.N Contents o. 1 Aim of the Experiment 2 Introduction 3 Apparatus Required 4 Principle 5 Circuit Diagram 6 Theory 7 Procedure 9 Observation 10 Precautions 11 Bibliography

Page No. 5 6 7 8 9 10 14 16 17 18

P a g e 5 | 22

PHYSICS PROJECT | ADHISH ANAND

AIM TO CONSTRUCT AN AUTOMATIC NIGHT LAMP USING A TRANSISTOR AND LDR

P a g e 6 | 22

PHYSICS PROJECT | ADHISH ANAND

INTRODUCT ION In some cities and villages, sometimes street lights glow in day time without any reason. In mining regions people face many difficulties due to absence of light in the nights. In frontier and hilly P a g e 7 | 22

PHYSICS PROJECT | ADHISH ANAND

areas, people face many problems due to damaged street lights. For solving these problems, we create a device in which the lights glow in night and in day time, they get switched off automatically and don't glow. Due to use of it, we can solve above problems and can also save electricity.

P a g e 8 | 22

PHYSICS PROJECT | ADHISH ANAND

APPARATUS REQUIRED

1.

A n-p-n transistor;

2.

Breadboard;

3.

Resistors:330Ω, 1MΩ

4.

Connecting Wires; P a g e 9 | 22

PHYSICS PROJECT | ADHISH ANAND

5.

LED;

6.

LDR;

7.

9V Battery;

PRINCIPLE

This project is based on Light Dependent Resistance (L.D.R.). LDR is a resistance, in which opposing power of current depends on the presence of quantity of light present, i.e. the resistance of LDR increases or decreases, according to quantity of light which falls on it. If LDR places in darkness, the resistance of LDR increases and when light falls on it, the resistance of LDR decreases and act as a conductor. Any LDR in the presence of light and darkness changes its resistance is depending on the different types of LDR. P a g e 10 | 22

PHYSICS PROJECT | ADHISH ANAND

CIRCUIT DIAGRAM

P a g e 11 | 22

PHYSICS PROJECT | ADHISH ANAND

THEORY 1. A transistor is a semiconductor device used to amplify or switch electronic signals and electrical power. It is composed of semiconductor material with three terminals for connection to an external circuit.

Emitter (E): It is the left hand side thick layer of the transistor which is heavily doped; P a g e 12 | 22

PHYSICS PROJECT | ADHISH ANAND

Base (B): It is a central thin layer of transistor which is lightly doped; Collector (C): It is the right hand side thick layer of the transistor which is moderately doped; A p-n-p junction transistor is obtained by growing a thin layer of thin layer of ntype semiconductor in between two relatively thick layers of ptype semiconductor.

A n-p-n junction transistor is obtained by growing a thin layer p-type semi-conductor in between two relatively thick layers of n-type semi-conductor.

P a g e 13 | 22

PHYSICS PROJECT | ADHISH ANAND

In the project, common emitter n-p-n transistor (BC-547) is used.

2. CARBON RESISTOR: A carbon resistor has generally four rings or bands A, B, C and D of different colours corresponding to the value of resistance. In project, we use carbon resistance of 1M ohms and 330 ohms.

3. LDR: LDR means light dependent resistance which is used to complete the circuit. P a g e 14 | 22

PHYSICS PROJECT | ADHISH ANAND

4. LED: A light-emitting diode (LED) is a semiconductor light source. When a lightemitting diode is forward-biased (switched on), electrons are able to recombine with electron holes within the device, releasing energy in the form of photons. In this project, we use led of white colour.

5. BATTERY: This is a rectangular prism shape with rounded edges and a polarized snap connector at the top. In project, we use 9-Volt battery. P a g e 15 | 22

PHYSICS PROJECT | ADHISH ANAND

6. WIRES: A wire is a single, usually cylindrical, flexible strand or rod of metal. These are used to connect components. 7.BREADBOARD: A breadboard is a construction base for prototyping of electronics. Because the solderless breadboard does not require soldering, it is reusable.

P a g e 16 | 22

PHYSICS PROJECT | ADHISH ANAND

PROCEDURE  Take a breadboard and connect its two halves  Connect a 9V battery on the breadboard.  Connect an NPN transistor on the breadboard with its three legs (Emitter, Base, Collector) inserted in three different columns of the breadboard.

 The emitter of the transistor is grounded. Connect one leg of a 1 MΩ resistor to the base of the transistor, and its other leg to any different column of the breadboard. Connect the corresponding column to Vcc.  Connect an LDR between the base and emitter of the transistor. P a g e 17 | 22

PHYSICS PROJECT | ADHISH ANAND

 Connect one leg of a 330 Ω resistor to the collector of the transistor, and its other leg to any different column of the breadboard.  Take an LED. Connect its negative terminal to the right leg of 330 Ω resistor, and its positive terminal to Vcc.

P a g e 18 | 22

PHYSICS PROJECT | ADHISH ANAND

OBSERVATION When the circuit is exposed to light, the led remains off. When the circuit is taken into dark, the led glows.

P a g e 19 | 22

PHYSICS PROJECT | ADHISH ANAND

PRECAUTIONS •Excess current should not be ed through LED. •Make all the connections neat, clean and tight.

• Never exceed the ratings for the current given in the transistor manual. P a g e 20 | 22

PHYSICS PROJECT | ADHISH ANAND

age of excessive current.

A n-p-n transistor which broke due to the

BIBLIOGRAPHY • colorado.edu/physics/phys3330/PDF/Expe riment7.pdf P a g e 21 | 22

PHYSICS PROJECT | ADHISH ANAND

• en.wikipedia.org/wiki/Transistor • en.wikipedia.org/wiki/Common_emitter • 230nsc1.phyastr.gsu.edu/hbase/electronic/npnce.html • tedpavlic.com/teaching/osu/ece327/lab1_ bjt/lab1_bjt_transistor_basics.pdf • hyperphysics.phyastr.gsu.edu/hbase/solids/trans.html

BOOKS• Comprehensive Lab manual PHYSICS Class 12; • Pradeep Reference Guide for PhysicsClass 12; • NCERT Physics Class 12;

P a g e 22 | 22