C90 Driver Instruction 1t3q6j

Service Training

Linde C90 / 5 -8 High ECH Operators Training

First Rule Safety First

1

Service Training

Only a trained driver should operate the C90 For a save operation of the truck all safety regulations given by the Linde C90 Operators Handbook as well as the Local regulations have to be followed strictly ! A wrong use of the truck can end in Human injury and financial loss for the operating company

2

Service Training

The C90 with his Major Components

Note : The Spreader is also available as a double handling spreader 3

Service Training

Note : The Joystick has already changed to a Container handling Style Joystick

4

Service Training The Truck Display

5

Service Training Possible Display Indications Informations are indicated like Truck Status Info ( T1 –T99) Example : T5 means , Speed Limitation Active ( Truck Full Operational only slow speed ) Truck Warnings ( 100 – 199 with either T or L or Z or Y in front ) Example 148 means seat switch problem ( Truck will go in Limp Home )

Alarms the truck will stop either drive or lift or both Example L 345

L xxx error lift in or related to Master LHC T xxx error drive in or related to Master LHC Or Z xxx error lift in or related to Slave LHC Y xxx error drive in or related to Slave LHC D indicates , there is a problem with the truck display or related systems X indicate Cummins engine problems

6

Service Training

Note : Under normal condition the brake pedals will only be used to keep the truck stationary ! Brake Force is created automatically when the drive pedal is released ! Soft/slow release will create a smoth braking , quick release will creat more rapid brakeforce 7

Service Training Lift and Tilt Operation The lift / Lower Tilt Forward /Backward control is given by the Joystick ! A lift or tilt command will operate this function and automatically also a speed command is given to the engine !

Lower Tilt Forward

Lift

Lower

Tilt Forward

Tilt Backwards

Tilt Backwards Lift

Multi functions ( lift and tilt , Lower and Tilt ) are possible by moving the joystick in a way to operate the Y and X axes in one

8

Service Training Drive / Transport Position of the Spreader Lift the mast up until the T5 indication in the cabs display is switching off, tilt the mast fully back ( With or without Container )

Note : If the Spreader is Higher or lower as the dedicated transport position the machine will only drive slowly and a information code is given on the drivers display T5 Speed Limitation Active

9

Service Training Spreader Operation Double Handling Spreader The Spreader Endbeams carrying insteat of Twistlock a hook type attachement with a hydraulic activated clamp The picture shows one of two end beam assembly in the Ready for pick position

On the Spreader Indicator Lamp row only the red light will be on

This indicates , No Container !

10

Service Training Spreader Operation Double Handling Spreader

Light Indication One Single Container

Light Indication Double Box

11

Service Training Spreader Operation Double Handling Spreader Now operate the function Clamp

The Piston of the Hydraulic cylinder will be forced out and the clamp hooks will move into the the twistlock corner holes on the lower and upper container The indicator lights changing to

The system is now ready for lifting up the single container or the double package ! If the top box is shifted more then 30 mm offset to the left , the left orange light will flash , if the offset is to the right , the right orange light will flash ! NOTE : Truck will only reach full travel speed if only the red or only the green light is on 12

Service Training

13