Basic Technical Drawing Exam 326hd

Basic Technical Drawing: Second Semester Exam? This is a quiz in my Basic Archecture Draw class and i would like some answers lol. Name: Basic Technical Drawing: Second Semester Exam Multiple Choice Identify the choice that best completes the statement or answers the question. ABCD 1. The two basic kinds of dimensions are a. shape and size. c. thickness and length. b. length and height. d. size and location. ABCD 2. The two main elements necessary for a complete graphic description of an object are a. shape and size. c. thickness and length. b. length and height. d. height and width. ABCD 3. The unit of measurement used on metric drawings is the __________. a. foot c. millimeter b. inch d. centimeter ABCD 4. The system of placing dimensions on a drawing where all dimensions are read from the bottom of the drawing is called the _________ system. a. unidirectional c. single b. datum d. aligned ABCD 5. The system of placing dimensions on a drawing where all dimensions are read from the bottom and right side of the drawing is called the _________ system. a. unidirectional c. single b. datum d. aligned ABCD 6. a complete circle is dimensioned as a _________. a. diameter c. radius b. circumference d. chord ABCD 7. an arc is dimensioned as a __________. a. diameter c. radius b. circumference d. chord ABCD 8. The rounded-in corner between two surfaces is called a __________. a. kerf c. round b. knurl d. fillet ABCD 9. The rounded-over corner of two surfaces is called a _________. a. kerf c. round b. knurl d. fillet ABCD 10. The process whereby a part is formed by pouring molten metal into a hollow form (mold) of the desired shape and allowing it to harden is called __________. a. casting c. finishing b. forging d. machining ABCD 11. a way of fastening metal pieces together using heat or a combination of heat and pressure is called __________. a. casting c. forging b. welding d. machining ABCD 12. The treatment of a material surface for the purpose of protection or improving its appearance is called _________. a. casting c. finishing b. forging d. machining ABCD 13. a symbol indicating that a surface is to be finished or machined is called a __________. a. die c. finish mark b. mold d. template ABCD 14. When an object is placed between the observer and the picture plane in a perspective drawing, the perspective drawing will be __________. a. distorted c. smaller than the object b. larger than the object d. too close to the ground ABCD 15. which of the following is the correct term for the plane of projection in a perspective? a. horizontal c. picture b. central d. vertical ABCD 16. If a perspective drawing is to be larger than the true size of the object, the object is ________. a. elevated higher than the point of sight c. placed between the observer and the picture plane b. located close to the station point d. placed closer to the horizon ABCD 17. Of the following, the one that would not be classified as a perspective drawing is a _________. a. one-point c. three-point b. two-point d. four-point ABCD 18. which of the following is not a type of pictorial drawing? a. perspective c. oblique b. orthographic d. isometric ABCD 19. a pictorial drawing is a _________. a. multiview drawing c. simple drawing b. working drawing d. picture drawing ABCD 20. Identify the following drawing. a. Oblique c. Isometric b. Perspective d. Orthographic ABCD 21. which of the instruments below would be most useful in beginning an isometric drawing or projection? a. Protractor c. 40-40 Triangle b. Divider d. 30-60 Triangle ABCD 22. an isometric drawing differs from an isometric projection in that __________. a. ellipses are required on drawings c. drawings appear to be oversize b. angles are true on drawing d. drawings are not proportionately correct ABCD 23. which of the following types of

pictorial drawings is characterized by equal angles between the three axes? a. Oblique c. Perspective b. Isometric d. Trimetric ABCD 24. which method is used to construct angles and curves on an isometric drawing? a. plotting offsets c. Approximation b. Revolution d. Box Construction ABCD 25. The rule concerning hidden lines on isometric drawings states that they are __________. a. never used c. used only if they are needed to clarify the object b. used to show hidden features d. used only within the isometric axis ABCD 26. Identify the following drawing. a. Oblique c. Isometric b. Perspective d. Orthographic ABCD 27. an oblique drawing having a receding axis its true length is