Air Grilles Diffs 314y2g

diffs

F www.titus-hvac.com | www.titus-energysolutions.com

www.titus-hvac.com | www.titus-energysolutions.com

Table of Contents

F

Diffs

diff products Diff Products............................................................................................................................................................................ F6

overview Diffs Overview........................................................................................................................................................................ F13

linear slot diffs Modulinear - Aluminum............................................................................................................................................................... F15 ML-37, -38, -39, -40, -TZ Slotted - Supply................................................................................................................................... F15 MLR-37, -38, -39, -40, -TZ Slotted - Return.......................................................................................................................... F15 Linear Slot Performance Data............................................................................................................................................... F24 Return Performance Data for Plenum Applications.............................................................................................................. F28 Suggested Specifications...................................................................................................................................................... F30 Model Number Specification................................................................................................................................................ F30 Modulinear Narrow Tee - Aluminum............................................................................................................................................ F32 ML-37-NT, -38-NT, -39-NT, -40-NT Slotted - Supply........................................................................................................... F32 MLR-37-NT, -38-NT, -39-NT, -40-NT Slotted - Return.......................................................................................................... F32 Modulinear Diff Plenums - Steel........................................................................................................................................... F33 MP-37, -38, -39, -40 Slotted - Supply.................................................................................................................................. F33 MP-SP-37, -38, -39, -40 Slotted - Supply............................................................................................................................. F33 MPI-37, -38, -39, -40............................................................................................................................................................ F33 Modulinear Plenum Performance Data................................................................................................................................. F35 Suggested Specifications...................................................................................................................................................... F48 Model Number Specification................................................................................................................................................ F48

linear bar diffs Fixed Bars - Aluminum................................................................................................................................................................. F49 CT-480, -481 - ¼” Spacing - 1/8” Bars - 0°/15° Deflection.................................................................................................... F49 CT-580, -581 - ½” Spacing - 1/8 ” Bars - 0°/15° Deflection................................................................................................... F49 CT-540, -541 - ½” Spacing - ¼” Bars - 0°/15° Deflection.................................................................................................... F49 Fixed Bars - Pencil Proof - Aluminum........................................................................................................................................... F49 CT-PP-0 - 7/16” Spacing - 7/32” Bars - 0° Deflection............................................................................................................... F49 CT-PP-3 - 7/16” Spacing - 7/32” Bars - 30° Deflection............................................................................................................. F55 Linear Bar Performance Data................................................................................................................................................ F55 Pencil Proof Linear Bar Performance Data............................................................................................................................ F58 Suggested Specifications...................................................................................................................................................... F60 Model Number Specifications.............................................................................................................................................. F60

linear louver diffs

DIFFS

Architectural - Adjustable - Aluminum......................................................................................................................................... F63 LL-1, LL-2 .............................................................................................................................................................................. F63 Performance Data................................................................................................................................................................. F67 Suggested Specifications...................................................................................................................................................... F69 Model Number Specification................................................................................................................................................ F69

F2

round ceiling diffs Two Horizontal Discharge Patterns............................................................................................................................................... F70 TMR, TMR-AA...................................................................................................................................................................... F70 Performance Data................................................................................................................................................................. F70 Suggested Specifications...................................................................................................................................................... F72 Model Number Specification................................................................................................................................................ F72 Vertical to Horizontal Discharge Pattern - Adjustable.................................................................................................................. F73 TMRA, TMRA-AA.................................................................................................................................................................. F73 Performance Data................................................................................................................................................................. F74 Suggested Specifications...................................................................................................................................................... F75

Table of Contents (continued)

Diffs

perforated ceiling diffs

F

DIFFS

1, 2, 3, or 4-Way Discharge Pattern............................................................................................................................................. F82 PAS, PAS-AA - Adjustable..................................................................................................................................................... F82 PAR, PAR-AA......................................................................................................................................................................... F82 PDS - Adjustable................................................................................................................................................................... F82 PDR....................................................................................................................................................................................... F82 PAS Performance Data.......................................................................................................................................................... F86 PDS Performance Data.......................................................................................................................................................... F89 PAS, PDS Performance Notes............................................................................................................................................... F92 PAR, PXP, PMR, PXP-DR, PDR Performance Data................................................................................................................ F92 PAR, PXP, PMR, PXP-DR, PDR Performance Notes.............................................................................................................. F92 Suggested Specifications...................................................................................................................................................... F93 Model Number Specification................................................................................................................................................ F93 Return s ....................................................................................................................................................................... F95 PXP, PXP-AA......................................................................................................................................................................... F95 PXP-DF.................................................................................................................................................................................. F95 Suggested Specifications...................................................................................................................................................... F96 Model Number Specification................................................................................................................................................ F96 Star Pattern - Adjustable.............................................................................................................................................................. F97 PSS, PSS-AA......................................................................................................................................................................... F97 PSS-DF.................................................................................................................................................................................. F97 Performance Data............................................................................................................................................................... F100 Suggested Specifications.................................................................................................................................................... F101 Model Number Specification.............................................................................................................................................. F101 Curved Blade - 1, 2, 3 or 4-Way Deflectors ........................................................................................................................ F102 PCS, PCS-AA....................................................................................................................................................................... F102 PCS-DF................................................................................................................................................................................ F102 Performance Data............................................................................................................................................................... F105 Suggested Specifications.................................................................................................................................................... F107 Model Number Specification.............................................................................................................................................. F107 Narrow Tee - Steel...................................................................................................................................................................... F108 PAS-NT - Round Pattern..................................................................................................................................................... F108 PAR-NT - Return................................................................................................................................................................. F108 PXP-NT - Return ........................................................................................................................................................ F108 PSS-NT - Star Pattern......................................................................................................................................................... F108 PCS-NT - Curved Blade....................................................................................................................................................... F108 Modular Core - 1, 2, 3 or 4-Way Adjustable - Steel................................................................................................................... F113 PMC.................................................................................................................................................................................... F113 PMC-DF............................................................................................................................................................................... F113 PMR.................................................................................................................................................................................... F113 Performance Data............................................................................................................................................................... F115 Suggested Specifications.................................................................................................................................................... F116 Model Number Specification.............................................................................................................................................. F116


Model Number Specification................................................................................................................................................ F75 Adjustable Heavy Duty - Steel...................................................................................................................................................... F76 XC-310.................................................................................................................................................................................. F76 Performance Data................................................................................................................................................................. F77 Suggested Specification....................................................................................................................................................... F77 Model Number Specification................................................................................................................................................ F77 Adjustable Vortex - Steel.............................................................................................................................................................. F79 V-1......................................................................................................................................................................................... F79 Performance Data................................................................................................................................................................. F80 Suggested Specification....................................................................................................................................................... F81 Model Number Specification................................................................................................................................................ F81

square ceiling diffs High Performance ...................................................................................................................................................................... F117 TMS, TMS-AA............................................................................................................................................................................. F117 Performance Data............................................................................................................................................................... F119 Suggested Specifications.................................................................................................................................................... F121

F3



DIFFS

F

F4

Diffs

Model Number Specification.............................................................................................................................................. F121 High Performance - Horizontal to Vertical Discharge Pattern - Adjustable................................................................................ F122 TMSA, TMSA-AA........................................................................................................................................................................ F122 Performance Data............................................................................................................................................................... F123 Suggested Specifications.................................................................................................................................................... F125 Model Number Specification.............................................................................................................................................. F125 Modular Core - 1, 2, 3 or 4-Way - Adjustable............................................................................................................................. F126 MCD, MCD-AA.................................................................................................................................................................... F126 Performance Data............................................................................................................................................................... F128 Suggested Specifications.................................................................................................................................................... F130 Model Number Specification.............................................................................................................................................. F130

architecthural ceiling diffs Square Plaque............................................................................................................................................................................. F131 OMNI, OMNI-AA................................................................................................................................................................. F131 Performance Data............................................................................................................................................................... F134 Suggested Specifications.................................................................................................................................................... F136 Model Number Specification.............................................................................................................................................. F136 Square Plaque, Narrow Tee........................................................................................................................................................ F137 OMNI-NT, OMNI-AA-NT..................................................................................................................................................... F137 Suggested Specifications.................................................................................................................................................... F138 Model Number Specification.............................................................................................................................................. F138 Round Plaque - Steel.................................................................................................................................................................. F139 R-OMNI...................................................................................................................................................................................... F139 Performance Data............................................................................................................................................................... F140 Performance Notes............................................................................................................................................................. F141 Suggested Specification..................................................................................................................................................... F142 Model Number Specification.............................................................................................................................................. F142 Square Backpan, Round Plaque - Steel...................................................................................................................................... F143 OMNI-RS............................................................................................................................................................................. F143 Performance Data............................................................................................................................................................... F144 Suggested Specification..................................................................................................................................................... F145 Model Number Specification.............................................................................................................................................. F145 Louvered Plaque - Steel.............................................................................................................................................................. F146 DAT...................................................................................................................................................................................... F146 Performance Data............................................................................................................................................................... F147 Suggested Specification..................................................................................................................................................... F148 Model Number Specification.............................................................................................................................................. F148 Louvered Plaque, Narrow Tee - Steel......................................................................................................................................... F149 DAT-NT................................................................................................................................................................................ F149 Suggested Specifications.................................................................................................................................................... F150 Model Number Specification.............................................................................................................................................. F150 Modu-Bloc Series....................................................................................................................................................................... F151 MB-30................................................................................................................................................................................. F151 MBR-30............................................................................................................................................................................... F151 MB-30 - ¾-inch Slot Width - Performance Data................................................................................................................ F154 MB-30 - 1-inch Slot Width - Performance Data................................................................................................................. F155 MBR-30 Performance Data................................................................................................................................................. F156 Suggested Specifications.................................................................................................................................................... F157 Model Number Specification.............................................................................................................................................. F158 Modu-Bloc Series, Narrow Tee................................................................................................................................................... F159 MB-30-NT........................................................................................................................................................................... F159 MBR-30-NT......................................................................................................................................................................... F159 Suggested Specifications.................................................................................................................................................... F160 Model Number Specification.............................................................................................................................................. F160 Swirl Face - Steel........................................................................................................................................................................ F162 TSW.................................................................................................................................................................................... F162 Performance Data............................................................................................................................................................... F163 Suggested Specification..................................................................................................................................................... F164 Model Number Specification.............................................................................................................................................. F164 Square - Architectural Plaque Face.................................................................................................................................. F165 Spectrum............................................................................................................................................................................. F165 Performance Data............................................................................................................................................................... F167 Suggested Specification..................................................................................................................................................... F169 Model Number Specification.............................................................................................................................................. F169


Diffs

Louvered Face, High Capacity ................................................................................................................................................... F170 TDC, TDC-AA....................................................................................................................................................................... F170 TDCA, TDCA-AA.................................................................................................................................................................. F170 Performance Data - Square Neck ....................................................................................................................................... F173 Performance Data - Rectangular Neck .............................................................................................................................. F174 Performance Data - Round Neck........................................................................................................................................ F183 Performance Notes............................................................................................................................................................. F185 Suggested Specifications.................................................................................................................................................... F186 Model Number Specification.............................................................................................................................................. F186 Louvered Face, Narrow Tee - Steel............................................................................................................................................. F190 TDC-NT................................................................................................................................................................................ F190 TDC-AA-NT......................................................................................................................................................................... F190 Suggested Specifications.................................................................................................................................................... F191 Model Number Specification.............................................................................................................................................. F191 Louvered Face, Induction Vanes................................................................................................................................................. F192 TDV, TDV-AA....................................................................................................................................................................... F192 Performance Data - Square Neck........................................................................................................................................ F194 Performance Data - Round Neck........................................................................................................................................ F196 Suggested Specifications.................................................................................................................................................... F198 Model Number Specification.............................................................................................................................................. F198 Louvered Face, Induction Vanes, Narrow Tee............................................................................................................................. F200 TDV-NT, TDV-AA-NT........................................................................................................................................................... F200 Suggested Specifications.................................................................................................................................................... F200 Model Number Specification.............................................................................................................................................. F200 Louvered Face, Induction Nozzles.............................................................................................................................................. F202 TDX, TDX-AA....................................................................................................................................................................... F202 TDX ADPI Comparison........................................................................................................................................................ F204 TDX , TDV & TDC Comparison ........................................................................................................................................... F205 Performance Data - Isothermal........................................................................................................................................... F205 Performance Data - 20DT Cooling...................................................................................................................................... F207 Suggested Specifications.................................................................................................................................................... F212 Model Number Specification.............................................................................................................................................. F212 Louvered Face, Induction Nozzles, Narrow Tee.......................................................................................................................... F214 TDX-NT, TDX-AA-NT........................................................................................................................................................... F214 Suggested Specifications.................................................................................................................................................... F214 Model Number Specification.............................................................................................................................................. F214


square and rectangular ceiling diffs

F

adjustable one-, two-, three- or four-way discharge pattern Adjustable 1, 2, 3, 4-way Discharge Pattern.............................................................................................................................. F216 250, 250-AA........................................................................................................................................................................ F216 Performance Data .............................................................................................................................................................. F218 Suggested Specifications.................................................................................................................................................... F221 Model Number Specification.............................................................................................................................................. F221

turbof

concentric supply/return diffs Combination Supply/Return - High Capacity.............................................................................................................................. F227 CSR, CSR-P......................................................................................................................................................................... F227 Performance Data .............................................................................................................................................................. F229 Suggested Specifications.................................................................................................................................................... F230

DIFFS

-Mounted Nozzles.............................................................................................................................................................. F223 TBF-AA................................................................................................................................................................................ F223 Performance Data .............................................................................................................................................................. F224 Suggested Specifications.................................................................................................................................................... F226 Model Number Specification.............................................................................................................................................. F226

F5

Diffs


Diff Products LINEAR DIFFS

pages: F15-F69

ML / MLR

CT

LINEAR SLOT CEILING DIFF

LINEAR BAR DIFF

• Ideal for continuous

F

length applications. • Full 180B pattern controller adjustment. • Direction & volume of the discharged air can be adjusted gradually by moving the pattern controllers.

MP

DIFFS

MODULINEAR DIFF PLENUM

F6

• Designed specifically for field attachment of ML or MLR diffs.

• Standard nominal lengths are 24, 36, 48, & 60 inches.

• Made from galvanized steel.

• Designed for heating or cooling applications.

• Available in 8 different core styles as well as a wide selection of frames & borders. • Can be used in ceiling, side wall, sill or floor installations. • MRI compatible.

LL

ML-TZ / MLR-TZ

LINEAR LOUVER DIFF

LINEAR SLOT CEILING DIFF

• Available in 1-way or 2-way

• For use with Armstrong

discharge patterns. • Ideal for continuous length applications. • Designed for heating or cooling applications. • MRI compatible.

TechZone ceiling grids.

• Modular length applications. • Full 180B pattern controller adjustment.

• Direction & volume discharged air can be adjusted gradually by moving the pattern controllers.

Diffs

Diff Products (continued)

TMR / TMR-AA

TMRA / TMRA-AA

TWO HORIZONTAL DISCHARGE PATTERNS

VERTICAL TO HORIZONTAL DISCHARGE PATTERN

• Uniform 360B discharge pattern. • Provides excellent performance in variable air volume systems. • All sizes have 3 cones.

• Adjustable round ceiling diffs for use in heating & cooling applications. • All sizes have 4 cones. • Uniform 360B discharge pattern.

XC-310 ADJUSTABLE HEAVY DUTY DIFF • Discharge pattern can be adjsusted from full horizontal to full vertical.

• Suitable for factories, warehouses, convention halls, & other applications where ceilings are high & conditions are variable.

V-1 ADJUSTABLE VORTEX • Uniform 360B discharge pattern. • Unit spins the air creating


ROUND CEILING DIFFS

pages: F70-F81

Coanda effect.

• Provides excellent performance in variable air volume systems.

F

DIFFS F7

Diffs



PCS / PCS-AA / PCS-DF

DIFFS

PSS / PSS-DF / PSS-AA

PMC / PMR

ADJUSTABLE PATTERN CONTROLLERS

ADJUSTABLE STAR PATTERN

ADJUSTABLE MODULAR CORE

• 51% free area perforated face. • Can be adjusted before

• 51% free area perforated face. • Provides tight, uniform, horizontal

• 51% free area perforated face. • Generates high induction air

• 51% free area perforated face. • Adjustable to 1,2,3, or 4-way

• Discharge pattern can be adjusted from horizontal to vertical.


PAR / PAR-AA

F8

PAS

CURVED BLADE DEFLECTORS or after installation.

F

PERFORATED CEILING DIFFS

pages: F82-F116

blanket of air that protects the ceiling against smudging. • Can be adjusted before or after installation. • Provides excellent performance in variable air volume systems.

PXP / PXP-AA / PXP-DF

RETURN DIFFS

RETURN S

• 51% free area perforated face. • Provides tight, uniform, horizontal

• 51% free area perforated face. • Designed for return or

blanket of air that protects the ceiling against smudging. • Can be adjusted before or after installation. • Provides excellent performance in variable air volume systems.

exhaust applications.

• Comprised of heavy gauge steel & aluminum.

pattern that maximizes throw.

• Can be changed to either side blow or corner blow in the field.

discharge pattern after installation.

• Modular core sections are easily removable.


Diffs


TMS / TMS-A / TMSA / TMSA-AA

MCD / MCD-AA

HIGH PERFORMANCE

ADJUSTABLE MODULAR CORE

• • • • •

• • • • •

Uniform 360B discharge pattern. Designed to protect ceiling from streaking & smudging. Available in steel or aluminum. Provides excellent performance in variable air volume systems. Available in fixed or adjustable pattern.

Adjustable to 1,2,3, or 4-way discharge pattern after installation. Modular core sections are easily removable. Available in steel or aluminum. Provides excellent performance in variable air volume systems. Maintains horizontal flow pattern from maximum to minimum cfm.


SQUARE CEILING DIFFS

pages: F117-F130

F

DIFFS F9

Diffs



F

R-OMNI

OMNI-RS

SQUARE PLAQUE DIFF

STEEL ROUND PLAQUE DIFF

STEEL ROUND PLAQUE DIFF

• • • •

• Uniform 360B discharge pattern. • Designed for architectural

• Delivers a tight 360B

OMNI / OMNI-AA Uniform 360B horizontal air pattern. Designed for architectural ceilings. Available in steel or aluminum. Provides excellent performance in variable air volume systems.

DIFFS

MB / MBR

F10

ARCHITECTURAL CEILING DIFFS

pages: F131-F169

ceilings & exposed ductwork.

• For use in heating or cooling applications. • Provides excellent performance in variable air volume systems.

TSW

MODU-BLOC SERIES

SWIRL FACE

• Choice of 1, 2, 3, or 4-slots. • Flow pattern guards against

• Delivers a tight 360B

ceiling smudging. • Discharge patterns are individually adjustable for each slot. • Easy connection to flexible duct.

circular air pattern.

• Designed for architectural ceilings. • Provides excellent performance in variable air volume systems.

horizontal air pattern. • Designed for architectural ceilings. • Provides excellent performance in variable air volume systems.

SPECTRUM CURVED PLAQUE FACE • Center appliqué available in nine standard colors.

• Provides a tight 4-way horizontal air discharge pattern.

• Can be used for retrofit applications with PCS perforated diff.

DAT LOUVERED PLAQUE • Smooth plaque face allows diff to harmonize with ceiling system.

• Designed for architectural ceilings. • Provides excellent performance in variable air volume systems.

• Easy connection to flexible duct.

Diffs


TDC / TDC-AA / TDCA / TDC-AA

TDV / TDV-AA

TDX / TDX-AA

LOUVERED FACE, HIGH CAPACITY

LOUVERED FACE, INDUCTION VANES

LOUVERED FACE, INDUCTION NOZZLES

• Handles large amount of air for a given

• High capacity ceiling diffs. • Available in 1,2,3, or 4-way core sizes. • Maintains an unbroken horizontal flow pattern

• High induction ceiling diffs. • Available in 1,2,3, or 4-way core sizes. • Maintains an unbroken horizontal flow pattern

• • • •

pressure drop and noise level. Maintains an unbroken horizontal flow pattern from maximum cfm down to minimum. Excellent performance for variable air volume systems. Available in fixed or adjustable pattern. Available in steel or aluminum.

from maximum cfm down to minimum.

• Excellent performance for variable air volume systems.

from maximum cfm down to minimum.

• Excellent performance for variable air volume systems.

• Integrated induction vanes for mixing air. • Available in steel or aluminum.

• Integrated induction nozzles for mixing air. • Available in steel or aluminum.


SQUARE & RECTANGULAR CEILING DIFFS

pages: F170-F215

F

SQUARE & RECTANGULAR CEILING & SIDE WALL DIFFS

pages: F216-F226

250 / 250-AA

TBF-AA -MOUNTED NOZZLES

• • • •

• • • •

Designed for ceiling & sidewall installations. Louvers are individually adjustable from the face of the diff. Excellent performance for variable air volume systems. Available in steel or aluminum.

Provides precise control of high capacity jets. Versatile diff for demanding spot cooling & heating HVAC applications. Available in variety of nozzle sizes. Available in steel or aluminum.

DIFFS

ADJUSTABLE DISCHARGE PATTERN

F11

Diffs



DIFFS

F

F12

pages: F227-F230

COMBINATION SUPPLY / RETURN CEILING DIFF

CSR / CSR-P COMBINATION SUPPLY/RETURN • Supply & return air are handled through one air device. • Compatible with unitary package units. • High capacity with long throws.

Diffs

Overview Linear diffs are long, narrow outlets that can be installed in multiple sections to achieve the appearance of one continuous length. Linear diffs are also available to fit in modular ceiling systems. This family of diffs has superior architectural appearance and is excellent for applications such as long corridors, large public areas, perimeter zones of offices and large exterior glass areas found in entrances and atriums. • • • • •

FlowBar Linear Diffs (Model FL). Linear Slot Ceiling Diffs (Model ML). Linear Bar Diffs (Model CT). Linear Louver Diffs (Model LL). Armstrong Techzone Ceiling Diffs (Model ML-TZ).

ROUND CEILING DIFFS

Titus round ceiling diffs are available in a broad range of sizes. These devices are typically installed in sheet rock or exposed duct. Titus round diffs are available with adjustable deflectors that allow the option for either horizontal or vertical flow. With their high capacity design, round ceiling diffs are an excellent selection for gymnasiums, atriums, industrial facilities, and large retail stores. • • • • •

2 Horizontal Pattern (Model TMR). Horizontal to Vertical Pattern (Model TMRA). Heavy Duty Adjustable (Model XC-310). Vortex Diff (Model V-1). Architectural Round (R-Omni).


Perforated ceiling diffs are typically selected to meet architectural demands for air outlets that blend into the ceiling plane. Features include perforated face with 51% free area, round or square inlets, and multiple mounting options. Titus perforated diffs can be selected with round or cross flow discharge patterns to maximize capacity or throw. • • • • • •

Adjustable curved blade deflectors (Model PCS). Stamped pattern controllers (Model PAS). Star pattern (Model PSS). Modular core (Model PMC). Matching return with backpan (Model PAR). Matching return, perforated face only (Model PXP).

Titus square diffs are designed to maximize engineering performance. This family of products includes the TMS fixed pattern diff, TMSA adjustable pattern diff, and the MCD modular core diff. All models are available in steel or aluminum construction and multiple mounting options. Titus square ceiling diffs are an excellent choice for VAV (variable air volume) applications. • High performance (Model TMS).


Titus architectural diffs are high performance products designed to provide a pleasing architectural appearance. These diffs provide a tight horizontal ceiling pattern maximizing room air induction and comfort in the occupied space. They are an excellent choice for architects, engineers and design professionals who want to maximize performance and aesthetics in an air outlet. • • • • • •

Square Plaque Diff (Model OMNI). Round Plaque Diff (Model R-OMNI). Square Backpan, Round Plaque Diff (Model OMNI-RS). Louvered with Plaque Face Diff (Model DAT). Modu-Bloc Diff, Adjustable (Model MB). Curved Plaque Face Diff (Model Spectrum).

SQUARE AND RECTANGULAR CEILING DIFFS LOUVERED FACE

Titus square and rectangular ceiling diffs feature an aesthetically pleasing, louvered face design. These diffs are available in 1, 2, 3 or 4-way airflow discharge patterns which provides a high level of flexibility in any design application. The units also offer an architecturally pleasing appearance with the diff face flush with the ceiling surface. All models are available in steel or aluminum construction and multiple mounting options.

F

• Louvered Face, Square, Rectangular, or Round Neck Inlet (Model TDC). • Louvered Face, Square, Rectangular, or Round Neck inlet, Induction Vanes (TDV). • Louvered Face, Square, Rectangular, or Round Neck inlet, Induction Nozzles (TDX).

SQUARE AND RECTANGULAR CEILING AND SIDE WALL DIFFS

Square and rectangular ceiling and side wall diffs can be applied to areas requiring directional patterns. The adjustable curved blades on the face of the 250 diff allow adjustment of the discharge airflow pattern from vertical to horizontal thereby providing maximum for ceiling or sidewall applications The Titus TBF-AA TurboF features concentric round cones that provide superb aesthetics and is great for applications requiring spot cooling or heating control. • Curved blades, adjustable discharge pattern (Model 250). • Spot Heating and Cooling (Model TBF-AA TurboF).

COMBINATION SUPPLY/RETURN CEILING DIFF Titus combination supply/return diffs are designed for use with unitary roof top package systems. The CSR model features a combination supply/return diff face and no distribution plenum. The supply section of the face is constructed with louver blades to provide maximum

DIFFS


• High performance, adjustable pattern (Model TMSA). • Modular Core, (Model MCD).


LINEAR DIFFS

F13


Overview (continued)

DIFFS

F

F14

performance with a flush face design. The return section in the center utilizes the 50F eggcrate core to maximize the return air performance. The CSR-P model features the same face design but includes a distribution plenum. Titus combination supply/return diffs are compatible with unitary equipment from 2-1/2 to 25 tons.

CEILING DIFFS FOR SPECIAL CEILING GRID DESIGNS

Narrow Tee, boltslot, Techzone, Axiom, and regressed tile ceilings are just a few examples of the special ceiling grid types being offered today. Titus has a complete line of diffs that are designed to integrate with these different ceilings types and maintain superior aesthetics and performance.

Diffs

Diffs

Linear Slot Ceiling Diffs

Available Supply Models: ML-37 • ½” Slot ML-38 • ¾” Slot ML-39 • 1” Slot ML-40 • 1½” Slot ML-TZ • ¾” Slot

• Both the direction and volume of the discharge air can be adjusted gradually by moving the pattern controllers (see diagrams below).

Available Return Models: MLR-37 • ½” Slot MLR-38 • ¾” Slot MLR-39 • 1” Slot MLR-40 • 1½” Slot MLR-TZ • ¾” Slot

Angular Down

Vertical

2A

1⅛ D’ + ¾

2B

⅞

D’ + ¼

Fully Dampered

Countersunk Screwholes for #8 SMS (5/16" from edge) D' = Duct Size

• Optional curving to a 6-foot minimum radius available for architectural enhancement (fixed blades only).

Opposed Unequal Flow (One Slot Dampered)

D' = Duct Size

1¾"

1¾" ¾"

S 1⅛" O' = D' plus ⅞"

⅛"

¾"

S

O' = D' plus ⅞"

⅛" 1⅛"

Border Type 1B D' = Duct Size 35/16" ⅛" to ½"

1¾" ¾" O'

S

⅛" A

FRAME AND BORDER TYPES

O’

• Mounting frames are cut to length and assembled in the field.

ML, MLR

A

• Maximum pattern controller length is 3 feet. Pattern controllers are furnished in multiple sections for a diff longer than 3 feet.

F

FRAME AND BORDER TYPES

Vertical & Horizontal

Border Type 1A

Type

• Optional Model MLF and MLRF diffs are designed for field cutting to length and are furnished in 6-foot sections.

• Material is extruded aluminum with steel pattern controllers.

Opposed

Border Types 2A, 2B both with • Flange Border • Concealed Mounting

• Maximum one piece section is 6 feet. Lengths greater than 6 feet are furnished in multiple sections.

• Choice of borders and mounting frames for various types of installations (diagrams below and on next page).

Dampered Horizontal

Border Types 1A, 1B both with • Flange Border • (1A) Screw Mounting • (1B) Duct Mounting/ lay-in application, No Screw Holes

• Ideal for continuous length applications. Multiple sections are shipped with required alignment strips or pins for field installation.

• Model MLR returns are the same as the Model ML supply diffs except that the pattern controllers are omitted.

• Optional Finishes: Anodized finishes available.

One Way

• Available with one to eight slots.

• Full 180° pattern controller adjustment means there are no “lefts” or “rights.” Specifying, ordering, and installing are simplified.

Products Include: • Standard Finish - #26 White border. Black pattern controllers.

Horizontal

ML, MLR

• Titus modulinear diffs are designed for variable air volume systems. They project a uniform blanket of air that adheres to the ceiling even at low flow rates.

MODULINEAR - ALUMINUM


ML(R)-37, -38, -39, -40, -TZ

All dimensions are in inches.

F15

Diffs


DIMENSIONS

F

Note: See page F17 for duct dimensions. Frame & Border Type 3 with • Flush Border • Concealed Mounting

Frame & Border Type 4 with • Flange Border • Concealed Mounting

D'=Duct Size

D'=Duct Size

D' plus 1¼" D' plus ½" D'=Duct Size

35/16"

35/16" 115/16"

1⅞"

¾"

¾"

Frame & Border Type 6 with • Plaster & Tile Mounting Frame • Flush Border • Concealed Mounting

S

O' = D' minus ⅛"

¾"

S

O' = D' plus ¾"

Frame & Border Types 7A, 7B with • Plaster & Tile Mounting Frame • Flange Border • Concealed Mounting

1⅛"

35/16" ½"

⅛"

¾"

S

O' = D' minus ⅛"

Border Types 9A, 9B with • Flange Border • Ceiling Hangers Hanger

D'=Duct Size

D' plus 1¼" D' plus ½" D'=Duct Size

3⅛"

1"

¾"

Border Type 11 with • Perimeter Plaster & • Tile Mounting Frame • Flush Border • Concealed Mounting

D'=Duct Size ¾"

35/16"

1⅞"

11/16" 9/16" O'

A

⅛"

¾"

S

O'

A 1⅛ ⅞

O’ D’ + ¾ D’ + ¼

Type 9A 9B

A ¾ 1⅛

A

1/16"

O’ D’ + ⅝ D’ + 1⅜

DIMENSIONS

Type 7A 7B

S

F16

35/16"

1¾"

115/16"

¾"

1⅞"


½" ¾"

S

¾" O' = D' minus ⅛"

1"

Diffs

DIMENSIONS Border Type 15 with

• Spline Border

• Flush Border

• Ceiling Hangers

• Ceiling Hangers

D'=Duct Size

Hanger

D'=Duct Size

3⅛"

3⅛" 1¾"

13/16"

7/16"

¾"

1¾"

11/16" ¾"

S

7/16"

O' = D' minus 1/16"

S

O' = D' minus 1/16"

Border Type 16 with

Hanger

Border Type 22 with

• Curved Flange Border

• Tape & Spackle Border

• Concealed Mounting

• H9 Hard Ceiling Clip


Border Type 12 with

7/16"

F

• Equalizing Grid ½x½x½ Aluminum Equalizing Grid

Duct by Others

1⅛" ¾"

Standard selections: ML-38 only 1 slot: duct diameters 10, 12, 14, 16, 18, 20, 22, 24” 2 slot: duct diameters 12, 14, 16, 18, 20, 22, 24” 3 slot: duct diameters 14, 16, 18, 20, 22, 24, 26” 4 slot: duct diameters 18, 20, 22, 24, 26, 28, 30, 32”

DIMENSIONS


F17

Diffs


DIMENSIONS

F

END FABRICATION X End Border (Border 22 only)

X End Border

Y Open Border

D = Duct Size

Z End Cap

D = Duct Size

C

C

D = Duct Size

O

O

D =CDuct Size C

O O

OVERALL LENGTH FOR VARIOUS END FABRICATIONS Frame and/or Border Type 1A, 1B, 9B 2A, 4, 7A 3, 6, 11

X

X

X-X C D - 1⅜ D D - 1⅜ D D - 1⅜

X

X-Y O C + ¾ D - 11/16 D + ¾ D - 11/16 D D D - 11/16

Y

X

O +⅜ +⅜ D

2B, 7B 9A 12, 15

D - 1⅜ D + ¼ D - 11/16 D + ⅛ D - 1⅜ D D - 11/16 D D - 11/16 D D - 5/16 D

16 22

D - 1⅜ D + ¾ D - 11/16 D + ⅜ D - 13/16 D + 11/16 D - 19/32 D + 17/32

Z

X-Z C D-⅝ D D-⅝ D D-⅝ D

Y

Y

Z

Z

Z

O + 7/16 + 7/16 + 1/16

C D D D

O D D D

Y-Z C D + 1/16 D D + 1/16 D D + 1/16 D

D - ⅝ D + 3/16 D - ⅝ D + 1/16 D - ¼ D + 1/16

D D D

D D D

D + 1/16 D + 1/16 D + ⅛ D + ⅛ D + 1/16 D + 1/16 D + ⅛ D + ⅛ D + 1/16 D + 1/16 D + ⅛ D + ⅛

D D

D D

N/A N/A

Y-Y

Y

N/A N/A

N/A N/A

Z-Z O C + 1/16 D + ⅛ D + 1/16 D + ⅛ D + 1/16 D + ⅛ D

N/A N/A

N/A N/A

O +⅛ +⅛ +⅛

N/A N/A

DUCT DIMENSION D’ (WIDTH) FOR VARIOUS FRAME & BORDER TYPES Types 1A, 1B

DIMENSIONS

No. of Slots

F18

1 2 3 4 5 6 7 8

Types 2A, 2B, 4, 7A, 7B, 16

ML/MLR ML/MLR ML/MLR ML/MLR ML/MLR ML/MLR ML/MLR 40 37 38 39 37 38 39

S=½ S=¾ 1⅞ 2⅛ 3⅛ 3⅝ 4⅜ 5⅛ 5⅝ 6⅝ 6⅞ 8⅛ 8⅛ 9⅝ 9⅜ 11⅛ 10⅝ 12⅝

ML/MLR 40

Types 3, 6, 11

Types 9A, 9B, 12, 15, 22

ML/MLR ML/MLR ML/MLR ML/MLR ML/MLR ML/MLR ML/MLR 40 ML/MLR 40 37 38 39 37 38 39

S = 1 S = 1 1/2 S = ½ S = ¾ S = 1 S = 1 1/2 S = ½ S = ¾ 2⅜ 2⅞ 2 2¼ 2½ 3 2⅛ 2⅜ 4⅛ 5⅛ 3¼ 3¾ 4¼ 5¼ 3⅜ 3⅞ 5⅞ 7⅜ 4½ 5¼ 6 7½ 4⅝ 5⅜ 7⅝ 9⅝ 5¾ 6¾ 7¾ 9¾ 5⅞ 6⅞ 9⅜ N/A 7 8¼ 9½ N/A 7⅛ 8⅜ 11⅛ N/A 8¼ 9¾ 11¼ N/A 8⅜ 9⅞ 12⅞ N/A 9½ 11¼ 13 N/A 9⅝ 11⅜ 14⅝ N/A 10¾ 12¾ 14¾ N/A 10⅞ 12⅞


S = 1 S = 1 1/2 S = ½ S = ¾ 2⅝ 3⅛ 1⅜ 1⅝ 4⅜ 5⅜ 2⅝ 3⅛ 6⅛ 7⅝ 3⅞ 4⅝ 7⅞ 9⅞ 5⅛ 6⅛ 9⅝ N/A 6⅜ 7⅝ 11⅜ N/A 7⅝ 9⅛ 13⅛ N/A 8⅞ 10⅝ 14⅞ N/A 10⅛ 12⅛

S = 1 S = 1 1/2 1⅞ 2⅜ 3⅝ 4⅝ 5⅜ 6⅞ 7⅛ 9⅛ 8⅞ N/A 10⅝ N/A 12⅜ N/A 14⅛ N/A

ML/MLR37 Not Available in Type 22

Diffs

DIMENSIONS


BORDER TYPES - ML-TZ, MLR-TZ BORDER LT (LAY-IN T-BAR) 1 3/8"

2 11/16"

1 7/8"

1 7/8"

3/4"

3/4"

9/16"

5 3/4"

5 3/4"

4"

5 5/16"

1 7/8"

9/16"

9/16"

3/4"

3/4" 5 3/4"

5 3/4"

F

BORDER DF (DROP FACE) 2 11/16"

1 3/8"

1 9/16"

1 9/16"

5/16"

5/16" 3/4"

3/4" 5"

9/16"

3/8"

5"

5 3/4"

3/8"

5 3/4"

4"

1 9/16" 5/16" 9/16"

5"

3/4"

3/8"

5 3/4"

BORDER NT (NARROW TEE) 2 11/16"

1 3/8"

1 9/16"

1 9/16" 5/16" 9/16"

3/4"

5 3/8"

3/16"

5 3/8"

5 3/4"

3/16"

5 3/4"

4"

5 5/16"

1 9/16"

1 9/16"

5/16" 9/16"

3/4" 5 3/8" 5 3/4"

5/16" 9/16"

3/4"

3/16"

DIMENSIONS

5/16" 3/4"

5 3/8" 5 3/4"

3/16"

F19

Diffs


DIMENSIONS

F

LT Border

DF, NT Borders D = Duct Size

O

OVERALL LENGTH FOR LT, DF, AND NT BORDERS

24 30 36 48 60 72

DIMENSIONS

D = Duct Size

O

Nominal Length (inches)

F20

C

C

Border LT

DF Border

NT Border

C

O

C

O

C

O

22 /8 285/8 345/8 465/8 585/8 705/8

23 /16 2913/16 3513/16 4713/16 5913/16 7113/16

23 29 35 47 59 71

23 29 35 47 59 71

23 /8 293/8 353/8 473/8 593/8 713/8

233/8 293/8 353/8 473/8 593/8 713/8

5

13

3

Diffs

ACCESSORIES MLF - Supply

MLRF - Return

Available Supply Models: MLF-37 • ½” Slot MLF-38 • ¾” Slot MLF-39 • 1” Slot MLF-40 • 1½” Slot Available Return Models: MLRF-37 • ½” Slot MLRF-38 • ¾” Slot MLRF-39 • 1” Slot MLRF-40 • 1½” Slot

Cut

Cut

• Ideal when the exact length of an ML or MLR diff is not known until it is being installed. • Standard factory cut diffs can be trimmed up to 6 inches. If more than 6 inches are to be removed, use the optional field cut diff.

• The field cut ML or MLR diff is 72 inches long, with the sides pre-punched to assure the proper alignment of field installed spacers. These field installed spacers provide additional rigidity during and after cutting.


FIELD CUT DIFFS

MITERED CORNERS Available Models: MC-37 MC-38 MC-39 MC-40

• ½” Slot • ¾” Slot • 1” Slot • 1½” Slot

No. of Slots 1, 2 3–8

D = Duct Size

O

F

DIMENSIONS FOR 90° MIITERED CORNERS 1A, 1B O D

2A, 4, 7A O D

2B, 7B O D

3, 6, 11 O D

9A O

9B D

O

D

12, 15 O D

22 O

D

127/16

12

12⅜

12

12⅛

12

11⅞

12

125/16

12 1211/16 12

12

12

133/16

12

247/16

24

24⅜

24

24⅛

24

23⅞

24

245/16

24 2411/16 24

24

24

253/16

24

Note: Dimensions shown will vary for other angles. D = Duct Size O

PLENUMS

W

Available Uninsulated Models: MP-37 • ½” Slot MP-38 • ¾” Slot MP-39 • 1” Slot MP-40 • 1½” Slot MP-37-SP • ½” Slot MP-38-SP • ¾” Slot MP-39-SP • 1” Slot MP-40-SP • 1½” Slot

L A

H

½"

Note: End caps are not insulated.

B

Optional Internal Insulation (MPI Models) Optional (MP-SP Design)

BLANK-OFFS BLKS BLKV

• Cold Rolled Steel • Fits over Neck • Black Finish • Vinyl • Fits in Slot • Black Finish


Furnished in 6-foot lengths. Field installed.

ACCESSORIES

Available Insulated Models: MPI-37 • ½” Slot MPI-38 • ¾” Slot MPI-39 • 1” Slot MPI-40 • 1½” Slot MPI-37-SP • ½” Slot MPI-38-SP • ¾” Slot MPI-39-SP • 1” Slot MPI-40-SP • 1½” Slot

1൐"

F21

Diffs


INSTALLATIONS MOUNTING FRAME ASSEMBLY Field Assembled Corners

Note: Mounting frame is used only on Frame & Border Types 3, 4, 6, 7A, 7B, 11. Shipped with mill finish. Side Rail

Field Assembled Corners Alignment Strips

•

Temporary Gauge

Mounting frame for Titus Modulinear

•

diffs assures a clean, accurately dimensioned ceiling

Temporary Gauge

opening to receive the diff.

•

End Frame (Factory Welded)

Choice of designs for wet plaster and other types of ceilings.

installed after construction is finished.

•

Diffs can be removed and replaced easily, without disfiguring the ceiling.

•

Furnished with the diffs in Frame & Border Types 3, 4, 6, 7A, 7B and 11.

•

F

Allows the diffs to be unpacked and

Cut to length in the field.

Mitered Corner

Spring Clip Factory Blade Spacer (Welded) Bar

Optional End Border

Alignment Pins

Optional End Cap

#8 x 1¼ Oval Head Screw (Border Type 1A only)

Optional Blank-Offs

• •

Pattern Controller

Diffs can be ed

Factory-made mitered corners are accurately welded and

long, continuous slots.

carefully finished for a smooth,

End borders and end caps close

unbroken corner treatment.

off the ends of the diffs

Mitered corners are rendered

and simplify installations ending

inactive with factory-installed

at walls and other stopping points. (see page F17.)

#6 x ½ SMS

•

together end-to-end to form

blank-offs. (see page F20.)

•

Alignment pins maintain close ts between sections.

INSTALLATIONS

(Border 22) Align Y-Y ends using supplied SS1 Spline Clips

•

Do not screw clips into side of diff. The screws may interfere with adjustment of the diff blades.

•

Always allow for expansion and contraction per the Grilles and Diffs Engineering Guidelines section of the Catalog.

F22

Diffs

INSTALLATIONS Field Cut Diff

• Titus Modulinear diffs are so simple and rugged they are routinely cut to length in the field with a fine tooth, high-speed carbon steel metal cutting blade. • Factory-cut diff Model ML (above) or MLR is ordered for a specified length from the factory, but can be trimmed as much as 3 inches from each end in the field.

Hanger Bracket for Border Types 9A, 9B, 12, 15


Factory Cut Diff (Trimming)

• Field-cut diff Model MLF (above) or MLRF is shipped in standard 6-foot lengths. • Model MLF or MLRF diff can be cut to any length. Field-installed spacers and other hardware are furnished with the diff for one field cut. Additional field cut kits are available at additional cost. • Unit is shipped without end caps or end borders.

Hanger Bracket for Border Types 2A, 2B

F

Hanger Bracket for Frame & Border Types 3, 4, 6, 7A, 7B, 11

Duct By Others

• These hanger brackets are a convenient means of attaching hanger wires to the diff from the structural of the building.

• Here the diff is simply pushed up into the duct until the outer legs of the hanger brackets snap into the hems of the duct. Screws then snug the diff against the ceiling.

• For installation in a Titus mounting frame, these hanger brackets function like the duct type brackets at the left. The outer legs of the brackets engage the side rails of the mounting frame.

INSTALLATIONS

Ceiling

F23

Diffs


PERFORMANCE DATA ML-37 - ½-INCH SLOT SPACING WIDTH - SUPPLY WITH CONTINUOUS PLENUM

1-Slot

2-Slot

3-Slot

4-Slot

F

5-Slot

6-Slot

7-Slot

8-Slot

Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical

5 0.006 1-1-6 2 10 0.006 1-3-10 4 16 0.006 2-4-13 5 21 0.006 3-6-14 7 26 0.006 3-7-16 7 31 0.006 4-9-18 7 36 0.006 6-10-19 8 42 0.006 7-10-20 8

10 0.023 3-6-12 6 21 0.023 13 5-10-17 8 31 0.023 15 7-13-21 10 42 0.023 16 10-14-25 12 52 0.023 17 11-16-28 14 62 0.023 18 12-18-30 16 73 0.023 19 13-19-33 16 83 0.023 19 14-20-35 17

PERFORMANCE DATA

NC corrections for various diff lengths

F24

Length Supply Return

2 -3 0

4 0 +3

6 +2 +5

8 +3 +6

10 +5 +8

16 0.051 20 6-11-15 9 31 0.051 23 10-15-21 13 47 0.051 25 13-18-26 15 62 0.051 26 14-21-30 18 78 0.051 27 16-24-34 20 94 0.051 28 18-26-37 22 109 0.051 29 19-28-40 24 125 0.051 29 20-30-43 26

21 0.090 27 10-12-17 11 42 0.090 30 14-17-25 16 62 0.090 32 17-21-30 19 83 0.090 33 19-25-35 22 104 0.090 34 22-28-39 25 125 0.090 35 24-30-43 27 146 0.090 35 25-33-46 29 166 0.090 36 27-35-49 31

26 0.141 32 11-14-19 12 52 0.141 35 16-19-28 17 78 0.141 37 19-24-34 21 104 0.141 38 22-28-39 25 130 0.141 39 25-31-44 28 156 0.141 40 28-34-48 30 182 0.141 41 30-36-52 32 208 0.141 41 32-39-55 35

31 0.203 37 12-15-21 14 62 0.203 40 17-21-30 19 94 0.203 41 21-26-37 23 125 0.203 43 25-30-43 27 156 0.203 44 28-34-48 30 187 0.203 44 30-37-52 33 218 0.203 45 33-40-56 35 250 0.203 46 35-43-60 38

36 0.277 40 13-16-23 15 73 0.277 43 19-23-33 20 109 0.277 45 23-28-40 25 146 0.277 46 27-33-46 29 182 0.277 47 30-36-52 32 218 0.277 48 33-40-56 35 255 0.277 49 35-43-61 38 291 0.277 49 38-46-65 41

42 0.362 44 14-17-25 16 83 0.362 47 20-25-35 22 125 0.362 48 25-30-43 27 166 0.362 50 28-35-49 31 208 0.362 51 32-39-55 35 250 0.362 51 35-43-60 38 291 0.362 52 38-46-65 41 333 0.362 53 40-49-70 43

47 0.458 46 15-18-26 17 94 0.458 49 21-26-37 24 140 0.458 51 26-32-45 28 187 0.458 52 30-37-52 33 234 0.458 53 34-41-58 37 281 0.458 54 37-45-64 40 328 0.458 55 40-49-69 43 374 0.458 55 43-52-74 45

Throw correction multiplier for length Length Throw Correction

For performance notes, see page F26.

2 0.72

4 1.0

8 1.5

10 1.7

12 1.8

Diffs

PERFORMANCE DATA

1-Slot

2-Slot

3-Slot

4-Slot

5-Slot

6-Slot

7-Slot

8-Slot


6 0.004 1-2-6 2 12 0.004 1-3-11 4 19 0.004 2-5-14 6 25 0.004 3-6-16 6 31 0.004 4-8-18 7 37 0.004 5-10-19 8 43 0.004 6-10-21 8 50 0.004 7-11-22 8

12 0.016 3-6-16 6 25 0.016 5-11-22 9 37 0.016 8-14-27 11 50 0.016 11-16-32 13 62 0.016 12-18-35 14 74 0.016 12 13-19-39 15 87 0.016 12 14-21-42 16 99 0.016 13 15-22-45 16

NC corrections for various diff lengths 2 -3 0

4 0 +3

6 +2 +5

8 +3 +6

10 +5 +8

25 0.065 20 11-16-23 12 50 0.065 23 15-22-33 17 74 0.065 25 18-27-40 21 99 0.065 26 21-32-46 24 124 0.065 27 24-35-52 27 149 0.065 28 26-39-57 30 174 0.065 29 28-42-61 32 198 0.065 29 30-45-66 33

31 0.102 26 13-18-26 14 62 0.102 29 19-26-37 19 93 0.102 31 23-32-45 23 124 0.102 32 26-37-52 27 155 0.102 33 29-41-58 30 186 0.102 34 32-45-64 33 217 0.102 34 35-49-69 36 248 0.102 35 37-52-73 38

37 0.146 30 16-20-28 15 74 0.146 33 22-28-40 21 112 0.146 35 27-35-49 26 149 0.146 36 32-40-57 30 186 0.146 37 35-45-64 33 223 0.146 38 39-49-70 36 260 0.146 39 42-53-75 39 298 0.146 39 45-57-81 42

43 0.199 34 18-22-31 16 87 0.199 37 25-31-43 23 130 0.199 39 31-38-53 28 174 0.199 40 36-43-61 32 217 0.199 41 40-49-69 36 260 0.199 42 43-53-75 39 304 0.199 42 47-58-81 42 347 0.199 43 50-61-87 45

50 0.260 37 19-23-33 17 99 0.260 40 27-33-46 24 149 0.260 42 33-40-57 30 198 0.260 43 38-46-66 34 248 0.260 44 42-52-73 38 298 0.260 45 46-57-81 42 347 0.260 45 50-61-87 45 397 0.260 46 54-66-93 48

56 0.330 40 20-25-35 18 112 0.330 43 28-35-49 25 167 0.330 45 35-43-60 32 223 0.330 46 40-49-70 36 279 0.330 47 45-55-78 40 335 0.330 48 49-60-85 45 391 0.330 48 53-65-92 48 446 0.330 49 57-70-99 51

F


For performance notes, see page F26.

2 0.72

4 1.0

8 1.5

10 1.7

12 1.8

PERFORMANCE DATA


19 0.037 14 6-12-20 10 37 0.037 17 11-17-28 14 56 0.037 18 14-20-35 17 74 0.037 20 16-24-40 19 93 0.037 21 18-26-45 21 112 0.037 21 19-29-49 24 130 0.037 22 21-31-53 24 149 0.037 23 22-33-57 24


ML-38, -TZ - ¾-INCH SLOT SPACING WIDTH - SUPPLY WITH CONTINUOUS PLENUM

F25

Diffs


PERFORMANCE DATA

F

ML-39 - 1-INCH SLOT SPACING WIDTH - SUPPLY WITH CONTINUOUS PLENUM

1-Slot

2-Slot

3-Slot

4-Slot

5-Slot

6-Slot

7-Slot

8-Slot


7 0.004 1-2-6 2 13 0.004 1-3-12 5 20 0.004 2-5-14 7 26 0.004 3-6-16 8 33 0.004 4-8-18 9 40 0.004 5-10-20 9 46 0.004 6-11-22 10 53 0.004 8-12-23 11

13 0.014 3-6-16 8 26 0.014 5-12-23 11 40 0.014 8-14-28 13 53 0.014 11-16-33 15 66 0.014 12-18-36 17 79 0.014 12 13-20-40 19 92 0.014 12 14-22-43 20 106 0.014 13 15-23-46 22

20 0.032 13 6-12-21 12 40 0.032 16 12-17-29 16 59 0.032 18 14-21-36 20 79 0.032 19 16-24-42 23 99 0.032 20 18-27-46 25 119 0.032 21 20-30-51 28 139 0.032 22 22-32-55 30 158 0.032 23 23-35-59 32

NC corrections for various diff lengths

PERFORMANCE DATA


F26

2 -3 0

4 0 +3

6 +2 +5

8 +3 +6

10 +5 +8

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the engineering section of this catalog for additional information. • Horizontal throw values given are for terminal velocities of 150, 100 and 50 fpm. • Throw values given are for isothermal conditions, and are based on 4-foot active section. For other lengths, see the Throw Correction Table. • Pressure is given in inches of WG for ML only. • Vertical throw values are given for terminal velocities of 50 fpm. • For divided throw, use the cfm-per-foot value for the number of slots in each direction. For sound, use the NC values for cfm-per-foot for the total number of slots.

26 0.057 20 11-16-24 14 53 0.057 23 15-23-34 19 79 0.057 25 19-28-42 24 106 0.057 26 22-33-48 28 132 0.057 27 24-36-54 31 158 0.057 28 27-40-59 34 185 0.057 29 29-43-63 36 211 0.057 29 31-46-68 39

33 0.089 26 14-19-27 15 66 0.089 29 19-27-38 22 99 0.089 30 23-33-46 27 132 0.089 32 27-38-54 31 165 0.089 33 30-42-60 34 198 0.089 33 33-46-66 38 231 0.089 34 36-50-71 41 264 0.089 35 38-54-76 43

40 0.128 30 16-21-29 17 79 0.128 33 23-29-42 24 119 0.128 35 28-36-51 29 158 0.128 36 33-42-59 34 198 0.128 37 36-46-66 38 238 0.128 38 40-51-72 41 277 0.128 38 43-55-78 45 317 0.128 39 46-59-83 48

46 0.174 34 18-22-32 18 92 0.174 37 26-32-45 26 139 0.174 39 32-39-55 32 185 0.174 40 37-45-63 36 231 0.174 41 41-50-71 41 277 0.174 42 45-55-78 45 323 0.174 42 48-59-84 48 370 0.174 43 52-63-90 52

53 0.228 37 20-24-34 19 106 0.228 40 28-34-48 28 158 0.228 42 34-42-59 34 211 0.228 43 39-48-68 39 264 0.228 44 44-54-76 43 317 0.228 45 48-59-83 48 370 0.228 45 52-63-90 52 422 0.228 46 55-68-96 55

59 0.288 40 21-25-36 20 119 0.288 43 29-36-51 30 178 0.288 45 36-44-62 36 238 0.288 46 42-51-72 42 297 0.288 47 46-57-80 45 356 0.288 48 51-62-88 51 416 0.288 48 55-67-95 55 475 0.288 49 59-72-102 58


2 0.72

4 1.0

8 1.5

10 1.7

• Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts. • For vertical throw, deduct 11 NC. • Dash (-) in space denotes an NC value of less than 10. • NC is based on 4-foot lengths; for other lengths use the NC correction table. • Throws listed are for the 1-way pattern. For divided airflow, select the airflow in each direction according to the number of slots aimed in that direction, with the total airflow apportioned between slots. For an explanation of catalog throw data, see the Engineering Guidelines section of the catalog. • Data obtained using plenums with duct velocities less than 800 fpm. See pages F35-F46 for data with Titus plenums. • For continuous lengths it is recommended that maximum active lengths are no longer than 10 feet.

Diffs

PERFORMANCE DATA

Number of Slots 1-Slot

2-Slot

3-Slot

4-Slot

Total Pressure

0.004

0.015

0.034

0.060

0.093

0.134

0.183

0.239

Airflow, cfm/ft. NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. NC (Noise Criteria) Horizontal Vertical

8 1-2-7 4 16 1-3-10 5 24 1-3-13 7 32 2-4-15 8

16 3-7-15 7 32 5-10-21 10 46 6-13-25 12 64 12 7-15-29 14

24 16 7-11-18 11 48 18 10-16-25 15 72 20 13-19-31 19 96 22 15-22-36 21

32 23 10-15-21 14 64 26 14-21-29 20 96 28 17-25-36 25 128 30 20-29-42 28

40 29 12-18-23 18 80 31 17-23-33 25 120 34 21-28-40 31 160 35 24-33-46 35

48 33 15-18-25 21 96 36 21-25-36 30 144 38 25-31-44 37 192 40 29-36-51 43

56 37 16-19-27 25 112 40 22-27-39 35 168 43 27-34-48 43 224 44 32-39-54 49

64 41 17-21-29 29 128 44 24-29-42 39 192 45 29-38-51 50 256 47 34-42-59 59


ML-40 - 11/2-INCH SLOT SPACING WIDTH - SUPPLY WITH CONTINUOUS PLENUM

Throw correction table for lengths ML-40 length (ft) Correction factor

2 4 6 8 10 0.40 0.83 1.00 1.15 1.29

F

NC correction table for lengths ML-40 length (ft) Correction factor

2 -6

4 -2

6 0

8 +2

10 +3 • Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts. • For vertical throw, deduct 11 NC. • Dash (-) in space denotes an NC value of less than 10. • NC is based on 6-foot lengths. For other lengths use the NC correction table above. • Data was obtained using plenums with duct velocities less than 800 fpm. See pages F38-F46 for data with Titus plenums. • For continuous lengths, a one foot blankoff should be used in between every 6 foot active section. A two foot blankoff should be used in between 10 foot active sections. Active sections should not exceed 10 feet without a blankoff. • For continuous lengths it is recommended that maximum active lengths are no longer than 10 feet.

PERFORMANCE DATA

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. Refer to the engineering section of the catalog for additional information. • Throw values given are for isothermal conditions, and are based on 6-foot active section. For other lengths, see the Throw Correction Table. • Horizontal throw values given are for terminal velocities of 150, 100 and 50 fpm. • Vertical throw values given are for terminal velocity of 50 fpm. • Throws listed are for the 1-way pattern. • For divided throw, use the cfm-per-foot value for the number of slots in each direction. For sound, use the NC values for cfm-per-foot for the total number of slots. • Pressure is given in inches of water gauge (WG).

F27

Diffs


PERFORMANCE DATA

F

RETURN PERFORMANCE DATA FOR PLENUM APPLICATIONS • All pressures are in inches of water. • NC values are based on a room absorption of 10 dB, re 10-12 watts, with a 10-foot active diff section (see the table below). • Dash (—) in space denotes NC value less than 10. • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. • For continuous lengths it is recommended that maximum active lengths are no longer than 10 feet.

NC Correction for Various MLR Lengths

MLR-37 No. of Slots 1 2 3 4 5 6 7 8

Negative SP cfm per NC cfm per NC cfm per NC cfm per NC cfm per NC cfm per NC cfm per NC cfm per NC

ft. ft. ft. ft. ft. ft. ft. ft.

0.011

0.025

0.045

0.072

0.103

0.180

0.275

0.415

10 — 20 — 30 — 40 — 50 — 60 — 70 — 80 —

15 — 30 — 45 11 60 12 75 13 90 14 105 15 120 15

20 14 40 17 60 19 80 20 100 21 120 22 140 23 160 23

25 20 50 23 75 25 100 26 125 27 150 28 175 29 200 29

30 25 60 28 90 30 120 31 150 32 180 33 210 34 240 34

40 33 80 36 120 38 160 39 200 40 240 41 280 42 320 42

50 39 100 42 150 44 200 45 250 46 300 47 350 48 400 48

60 44 120 47 180 49 240 50 300 51 360 52 420 53 480 53

0.007

0.028

0.063

0.108

0.170

0.250

0.345

0.450

10 — 20 — 30 — 40 — 50 — 60 — 70 — 80 —

20 — 40 10 60 12 80 13 100 14 120 15 140 16 160 16

30 18 60 21 90 23 120 24 150 25 180 26 210 27 240 27

40 26 80 29 120 31 160 32 200 33 240 34 280 35 320 35

50 32 100 35 150 37 200 38 250 39 300 40 350 41 400 41

60 37 120 40 180 42 240 43 300 44 360 45 420 46 480 46

70 41 140 44 210 46 280 47 350 48 420 49 490 50 560 50

80 45 160 48 240 50 320 51 400 52 480 53 560 54 640 54

0.018

0.040

0.070

0.108

0.160

0.215

0.280

0.450

20 — 40 — 60 — 80 — 100 — 120 — 140 — 160 —

30 11 60 14 90 16 120 17 150 18 180 19 210 20 240 20

40 19 80 22 120 24 160 25 200 26 240 27 280 28 320 28

50 25 100 28 150 30 200 31 250 32 300 33 350 34 400 34

60 30 120 33 180 35 240 36 300 37 360 38 420 39 480 39

70 34 140 37 210 39 280 40 350 41 420 42 490 43 560 43

80 38 160 41 240 43 320 44 400 45 480 46 560 47 640 47

100 44 200 47 300 49 400 50 500 51 600 52 700 53 800 53

MLR-38, -TZ

Length (ft.)

2

4

10

15

20

No. of Slots

MLR

-7

-4

0

+2

+3

1 2 3 4 5 6 7 8



PERFORMANCE DATA

MLR-39 No. of Slots 1 2 3 4 5 6 7

F28

8



Diffs

PERFORMANCE DATA

Number of Slots 1-Slot 2-Slot 3-Slot 4-Slot

Negative Static Pressure Airflow, cfm/ft. NC (Noise Criteria) Airflow, cfm/ft. NC (Noise Criteria) Airflow, cfm/ft. NC (Noise Criteria) Airflow, cfm/ft. NC (Noise Criteria)

0.007

0.028

0.063

0.108

0.17

0.250

0.345

0.450

20 40 60 80 -

40 10 80 13 120 15 160 16

60 21 120 24 180 20 240 27

80 29 160 32 240 34 320 35

100 35 200 38 300 40 400 41

120 40 240 43 360 45 480 46

140 44 280 47 420 49 560 50

160 48 320 51 480 53 640 54

NC correction table for lengths ML-40 length (ft) Correction factor

2 -6

4 -2

6 0

8 +2

10 +3

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. • Pressure is given in inches of water gauge (WG). • NC values are based on a room absorption of 10 dB, re 10-12 watts, with a 10-foot active diff section. For other lengths, refer to the NC correction table above. • Dash (-) in space denotes an NC value of less than 10. • For continuous lengths it is recommended that maximum active lengths are no longer than 10 feet.


MLR-40

F

PERFORMANCE DATA F29

Diffs


SUGGESTED SPECIFICATIONS

F

LINEAR SLOT CEILING DIFFS

capable of 180° pattern adjustment from the face of the diff and shall allow dampering if required. Maximum pattern controller length shall be 3 feet, for diffs longer than 3 feet pattern controllers shall be furnished in multiple sections.

ALUMINUM MODULINEAR Available Supply Models: ML-37 • ½” Slot ML-38 • ¾” Slot ML-39 • 1” Slot ML-40 • 1½” Slot

The finish shall be #26 white on the face and #84 black on the pattern controllers. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test.

Available Return Models: MLR-37 • ½” Slot MLR-38 • ¾” Slot MLR-39 • 1” Slot MLR-40 • 1½” Slot Modulinear diffs shall be Titus model ML (supply) or MLR (return) with ½-, ¾-, 1-, and 1-½-inch slot spacing of the sizes and mounting types shown on the plans and outlet schedule. Linear slot diffs shall be available in standard one piece lengths up to 6 feet and 1 to 8 discharge slots. Diff lengths greater than 6 feet shall be furnished in multiple sections and will be ed together end-to-end with alignment pins to form a continuous slot appearance.

The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Heavy gauge extruded aluminum end borders, end caps and mitered corners shall be available to close off the ends of the diffs. Plenums shall be manufactured by the same manufacturer of the linear slot diffs. Optional diff curving to a 6-foot minimum radius with fixed deflection shall be available as required.

All alignment components to be provided by the manufacturer. The return models shall be constructed the same as supply diffs without the pattern controllers. The frame and bars shall be constructed of heavy gauge extruded aluminum. The pattern controller shall be an aerodynamically curved “ice-tong” shaped steel deflector

The manufacturer shall provide published performance data for the linear slot diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

MODEL NUMBER SPECIFICATION

Number of Slots Length Model ML MLR

Supply Return

XXX

SPECIFICATIONS

1, 2, 3, 4, 5, 6, 7, 8

Specify

X Slot Width ½" ¾" 1"

37 38 39

1½"

40

X

XX

Border Type Refer to pages F15-F17 for Details

XX Finish

1A, 1B, 2A, 2B, 3, 4, 6, 7A, 7B, 9A, 9B, 11, 12, 15, 16, 22

Note: Duct diameter applies to ML38, Border 16 only. ML/MLR-40 available 1-4 slots only Border Type 22 not available for ML/MLR-37

F30

X

Duct Diameter (Note) 10, 12, Refer to 14, 16, page F18 for 18, 20, Details 22, 24, 26, 28, 30, 32

White Aluminum Mill

26 01 04

XX

Diffs


ALUMINUM MODULINEAR FOR TECHZONE CEILING GRIDS Available Supply Models: ML-TZ • ¾” Slot Available Return Models: MLR-TZ • ¾” Slot Modulinear diffs shall be Titus model ML-TZ (supply) or MLR-TZ (return) with ¾” inch slot spacing and nominal width of 3-¾” or 5-¾”” to fit Armstrong Industries Techzone style ceiling grids with 4" or 6" grid sizes. Linear slot diffs shall be available in standard one piece lengths up to 6 feet and 1 to 4 discharge slots. Diff lengths greater than 6 feet shall be furnished in multiple sections and will be ed together end-to-end with alignment pins to form a continuous slot appearance. All alignment components to be provided by the manufacturer. The return models shall be constructed the same as supply diffs without the pattern controllers.

an aerodynamically curved “ice-tong” shaped steel deflector capable of 180° pattern adjustment from the face of the diff and shall allow dampering if required. Maximum pattern controller length shall be 3 feet, for diffs longer than 3 feet pattern controllers shall be furnished in multiple sections. The finish shall be #31 Armstrong Global white to match the Global white finish on the Armstrong TechZone ceiling grid system. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Heavy gauge extruded aluminum end borders, end caps and mitered corners shall be available to close off the ends of the diffs. Plenums shall be manufactured by the same manufacturer of the linear slot diffs. The manufacturer shall provide published performance data for the linear slot diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

The frame and bars shall be constructed of heavy gauge extruded aluminum. The pattern controller shall be


LINEAR SLOT CEILING DIFFS

F


Number of Slots Model ML-TZ Supply MLR-TZ Return XXXXX

Border Type Lay-in T-Bar LT Drop Face DF Narrow Tee NT

1, 2, 3, 4, XX

X

X

Length

Module Width

Specify

4 inches 6 inches

XX Finish

4 6

Global White Aluminum Mill

31 01 04

SPECIFICATIONS

Note: 4 slots not available in DF border. Note: 4 slots not available in 4" wide units. Note: Standard finish is Armstrong Global white.

XX

F31

Diffs

F

ML(R)-37-NT, ML(R)-38-NT, ML(R)-39-NT MODULINEAR NARROW TEE - ALUMINUM

-39-NT; -40-NT and pages F28-F29 for MLR37-NT, -38-NT, -39-NT, and -40-NT. • The ML Modulinear diff is a high performance, high quality linear slot diff. The unique “ice tong” deflector blades allow both changes in air volume and direction from the face of the diff.

Available Supply Models: ML-37-NT • ½” Slot ML-38-NT • ¾” Slot ML-39-NT • 1” Slot ML-40-NT • 1½” Slot Available Return Models: MLR-37-NT • ½” Slot MLR-38-NT • ¾” Slot MLR-39-NT • 1” Slot MLR-40-NT • 1½” Slot

• Available in one to eight slots.

SUGGESTED SPECIFICATIONS LINEAR SLOT CEILING DIFFS

The frame and bars shall be constructed of heavy gauge extruded aluminum. The pattern controller shall be an aerodynamically curved “ice-tong” shaped steel deflector capable of 180° pattern adjustment from the face of the diff and shall allow dampering if required. Pattern controller length shall be one piece for the 2-foot modulinear diffs and two pieces for the 4-foot modulinear diffs.

ALUMINUM MODULINEAR NARROW TEE Available Supply Models: ML-37-NT • ½” Slot ML-38-NT • ¾” Slot ML-39-NT • 1” Slot ML-40-NT • 1½” Slot

Modulinear diffs shall be Titus Model ML-__-NT (supply) or MLR-__-NT (return) with ½-, ¾-, and 1-inch slot spacing of the sizes and mounting types shown on the plans and outlet schedule. Diffs shall be compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems. Linear slot diffs shall be available in standard one piece lengths of 2 and 4 feet and one to eight discharge slots. The return models shall be constructed the same as supply diffs without the pattern controllers.

ML-NT, MLR-NT

• Available in 24- or 48-inch lengths. • Made of extruded aluminum with steel deflectors.

For Performance Data and Notes, please refer to pages F24-F27 for ML-37-NT, -38-NT,

Available Return Models: MLR-37-NT • ½” Slot MLR-38-NT • ¾” Slot MLR-39-NT • 1” Slot MLR-40-NT • 1½” Slot

F32

ML-NT, MLR-NT


Linear Slot Ceiling Diffs (continued)

The finish shall be #26 white on the face and #84 black on the pattern controllers. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Heavy gauge extruded aluminum end borders shall be factory attached to close off the ends of the diffs. Plenums shall be manufactured by the same manufacturer of the linear slot diffs. The manufacturer shall provide published performance data for the linear slot diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

MODEL NUMBER SPECIFICATION Model ML Supply MLR Return XXX Slot Width ½" ¾" 1" 1½"

Length 24" 24 48 48" XX 37 38 39 40

NT Border Type

X

White Aluminum

X 1, 2, 3, 4, 5, 6, 7, 8 Number of Slots

Finish 26 01 XX

Notes: ML/MLR-40-NT Only available in 1-4 slots

Diffs

Linear Slot Ceiling Diffs (continued)

Available Models: MP-37 MP-38 MP-39 MP-40


• Widths available to fit Models ML and MLR Modulinear diffs with 1, 2, 3 or 4 slots. • Standard nominal lengths are 24, 36, 48, and 60 inches.

Special Performance Models: MP-37-SP • ½” Slot MP-38-SP • ¾” Slot MP-39-SP • 1” Slot MP-40-SP • 1½” Slot

MPI-37 MPI-38 MPI-39 MPI-40


With the air directed against an outside wall, the ML diff mounted in an MP-SP allows effective handling of the thermal load by thoroughly blanketing the wall or window surface.

• Optional internal insulation (MPI and MPI-SP models). • Optional field mounted inlet dampers are available.

1൐"

See page F27 for a further explanation of the MP-SP performance.

• Material is galvanized steel. • Optional MP-SP models maximize air diffusion by shortening the

• Utilizes the Modulinear diff’s

L A

H

throw and widening the spread of the discharge air. This is accomplished by internal baffling. The result is improved comfort in short-throw applications.

• End caps can be turned up to allow plenums to be installed on continuous runs of ML diffs.

• Titus Series MP plenums are designed specifically for field attachment of ML or MLR Modulinear diffs.

W

MP, MPI

excellent variable air volume performance. The air stays on the ceiling in a tight, horizontal pattern, even at low volumes.

MODULINEAR DIFF PLENUMS - STEEL

½"

Optional Internal Insulation (MPI Models)

B

Border Types 3, 4, 6, 7A, 7B, 11 ML/MLR End Fabrication XX XY YY ZZ

Border Types 1A, 1B, 3, 4, 6, 7A, 7B, 11, 9A, 9B, 12, 15 Nominal Length N (inches) 24 36 48 60 72

Note: Units with 12 inch inlets are 105/8 inches high.

ML/MLR End Fabrication XX XY YY ZZ

L N N N N

-

¼ ¼ ¼ ¼

6, 8, 10 6, 8, 10 6, 8, 10, 12 6, 8, 10, 12 6, 8, 10, 12 ML/MLR Type

-

¼ ¼ ¼ ¼

Standard Inlet Size 6 Oval 8 Oval 10 Oval 12 Oval

1

2

Dimensions A

B

6¼ 9⅜ 12½ 14⅛

5¼ 5¼ 5¼ 7⅞

3

1

23/16

27/16

211/16

2

37/16

315/16

47/16

57/16

3

411/16

57/16

63/16

711/16

4

515/16 615/16

715/16

915/16

5

7 /16

8 /16

9 /16

N/A

6

87/16

915/16 117/16

N/A

7

911/16 117/16 133/16

N/A

8

1015/16 1215/16 1415/16

N/A

Width Number of Slots 4 5 6

3

7

7

11

8

MP-37

17/16 211/16 315/16 53/16 67/16 711/16 815/16 103/16

MP-38

111/16 33/16 411/16 63/16 711/16 93/16 1011/16 123/16

MP-39

115/16 311/16 57/16 73/16 815/16 1011/16 127/16 143/16

MP-40

27/16 411/16 615/16 93/16


N/A

N/A

N/A

N/A

33/16

MP , MPI

Border Types 3, 4, 6, 7A, 7B, 11 End Fabrication

Standard Inlets

L N N N N

Width ML/MLR Number of Slots Type MP-37 MP-38 MP-39 MP-40

MODEL MP OR MP-SP PLENUM FOR ML AND MLR DIFFS All Border Types

F

H LP HP (in.) 7⅝ 10⅝

Optional (MP-SP Design)

Note: End caps are not insulated.


MP(I)-37, MP(I)-38, MP(I)-39

F33

Diffs


INSTALLATIONS

F

TRIMMING, CUTTING, HANGING

L A

MODEL MP OR MP-SP PLENUM FOR ML AND MLR DIFFS Border Types 2A, 2B Nominal Length N (inches) 24 36 48 60 72 Standard Inlet Size 6 Oval 8 Oval 10 Oval 12 Oval

Dimensions A

B

6¼ 9⅜ 12½ 14⅛

5¼ 5¼ 5¼ 7⅞

1

B

Standard Inlets 6, 8, 10 6, 8, 10 6, 8, 10, 12 6, 8, 10, 12 6, 8, 10, 12

W

1 18" 2"

H

H LP (in.) 8

OPTIONAL INTERNAL INSULATION (MPI MODELS)

ML/MLR End Fabrication

XX XY YY ZZ

ML/MLR Type

L

N N N N

-

⅞ ⅞ ¼ ¼

1

2

HP 11

Width (W) Number of Slots 3 4 5 6

8

2 /16

MP-38

2 /16 3 /16 5 /16 6 /16 8 /16 915/16 117/16 1215/16

MP-39

211/16 47/16

MP-40

3 /16

7

3

3 /16 4 /16 5 /16 7 /16

7

MP-37

3

7

15

11 7

15 15

3

8 /16 9 /16 10 /16 7

11

15

7

63/16 715/16 911/16 117/16 133/16 1415/16

5 /16 711/16 915/16 7

N/A

N/A

N/A

N/A

INSTALLATION DETAILS Border Types 1A, 1B, 9A, 9B, 12, 15

W = PLENUM SIZE

Border Types 2A, 2B

SCREWS BY OTHERS

Frame & Border Types 3, 4, 6, 7A, 7B, 11

W=Plenum Size

W = PLENUM SIZE

Concealed Mounting SCREWS BY OTHERS

MP-SP PERFORMANCE Elevation, MP-SP

Plan View Diff

Plenum Mounted on Diff

INSTALLATIONS

Jet

F34

Throw

MP-SP MPI-SP

Airflow Spread for Maximum Diffusion

MP-SP models maximize air diffusion by shortening the throw and widening the spread of the discharge air. This is accomplished by internal baffling. The result is improved comfort in short-throw applications, as in exterior zones.

MP Spread

At a given cfm, the MP-SP plenum shortens the throw and widens the spread of the air leaving the diff (as compared with the MP plenum or standard plenum).


Diffs

PERFORMANCE DATA

2 ft. 6-inch Inlet 4 ft.



12-inch 4 ft. Inlet

Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw

20 0.017 0.017 3-6-12 30 0.017 0.016 2-5-11 25 0.028 0.027 4-8-15 35 0.015 0.014 3-6-13 25 0.039 0.039 4-8-15 40 0.017 0.016 4-7-13 45 0.025 0.025 5-8-14

33 0.046 0.044 21 7-10-20 48 0.043 0.039 19 5-9-15 38 0.063 0.062 20 8-12-22 55 0.037 0.035 19 7-10-16 35 0.077 0.076 16 7-11-21 65 0.044 0.043 20 8-12-17 70 0.060 0.059 18 8-13-18

45 0.087 0.084 29 9-14-24 65 0.081 0.074 27 8-12-17 50 0.111 0.110 27 10-15-25 75 0.068 0.065 26 9-13-18 45 0.127 0.126 22 9-14-24 90 0.085 0.082 28 11-14-20 95 0.111 0.109 25 11-15-21

58 0.143 0.137 34 12-18-27 83 0.131 0.119 32 10-14-19 63 0.174 0.172 32 13-19-28 95 0.110 0.104 32 11-15-21 55 0.190 0.189 27 11-17-26 115 0.138 0.134 34 13-16-23 120 0.176 0.174 30 13-16-23

70 0.212 0.203 39 14-21-30 100 0.193 0.175 37 12-15-21 75 0.251 0.247 37 15-22-31 115 0.161 0.152 36 13-16-23 65 0.265 0.264 31 13-20-29 140 0.205 0.198 38 14-18-25 145 0.257 0.255 35 15-18-26

83 0.294 0.282 43 17-23-32 118 0.266 0.241 41 13-16-23 88 0.341 0.336 40 18-23-33 135 0.222 0.209 40 14-17-25 75 0.353 0.351 34 15-22-31 165 0.285 0.275 42 16-19-27 170 0.354 0.350 39 16-20-28

95 0.390 0.374 46 20-24-34 135 0.351 0.319 44 14-17-25 100 0.446 0.439 43 20-25-35 155 0.292 0.276 43 15-19-26 85 0.453 0.451 37 17-23-33 190 0.378 0.365 45 17-21-29 195 0.466 0.461 42 17-21-30


ML-37 - ½-INCH SLOT SPACING WIDTH - ONE-SLOT - SUPPLY WITH MP-37 PLENUM

F

ML-38, -TZ - ¾-INCH SLOT SPACING WIDTH - ONE-SLOT - SUPPLY WITH MP-38 PLENUM 2 ft. 6-inch Inlet 4 ft.

2 ft.

4 ft.


12-inch 4 ft. Inlet

20 0.015 0.014 1-3-10 40 0.018 0.015 2-5-12 25 0.037 0.036 2-5-13 40 0.014 0.013 2-5-12 30 0.115 0.115 3-7-15 40 0.015 0.015 2-5-12 60 0.067 0.067 5-9-16

35 0.045 0.042 18 4-9-18 60 0.041 0.034 20 5-9-16 35 0.072 0.071 14 4-9-18 68 0.041 0.037 19 6-10-17 35 0.157 0.156 11 4-9-18 68 0.044 0.042 16 6-10-17 78 0.112 0.111 15 8-11-19

50 0.091 0.087 26 8-13-25 80 0.072 0.061 27 8-12-19 45 0.118 0.117 20 7-11-23 95 0.080 0.074 27 9-14-21 40 0.205 0.204 14 6-10-20 95 0.086 0.083 24 9-14-21 95 0.169 0.167 20 9-14-21

65 0.154 0.146 32 11-16-29 100 0.113 0.095 32 10-15-21 55 0.177 0.175 24 9-14-26 123 0.134 0.123 33 12-17-23 45 0.259 0.258 17 7-11-23 123 0.143 0.138 30 12-17-23 113 0.236 0.235 24 11-16-23

80 0.233 0.222 37 13-20-32 120 0.163 0.137 36 12-16-23 65 0.247 0.244 28 11-16-29 150 0.200 0.185 38 15-18-26 50 0.320 0.319 19 8-13-25 150 0.215 0.207 35 15-18-26 130 0.316 0.313 27 13-17-24

For Performance Notes, please see page F47.

95 0.328 0.312 41 16-24-34 140 0.222 0.187 40 14-18-25 75 0.329 0.325 32 13-19-31 178 0.280 0.259 42 16-20-28 55 0.387 0.386 22 9-14-26 178 0.301 0.289 39 16-20-28 148 0.406 0.403 30 15-18-26

110 0.440 0.419 45 18-26-37 160 0.290 0.244 43 15-19-27 85 0.422 0.417 35 14-21-33 205 0.374 0.345 45 18-21-30 60 0.460 0.459 24 10-15-27 205 0.401 0.386 42 18-21-30 165 0.509 0.505 33 16-19-27

PERFORMANCE DATA

8-inch Inlet


F35

Diffs


PERFORMANCE DATA ML-39 - 1-INCH SLOT SPACING WIDTH - ONE-SLOT - SUPPLY WITH MP-39 PLENUM 2 ft. 6-inch Inlet 4 ft.


2 ft.

F

10-inch Inlet 4 ft.

12-inch 4 ft. Inlet


20 0.008 0.007 1-2-8 35 0.010 0.008 1-2-9 30 0.021 0.020 2-5-13 40 0.009 0.008 1-3-10 30 0.031 0.031 2-5-13 50 0.012 0.012 2-5-13 60 0.023 0.023 3-7-15

35 0.025 0.023 18 3-6-15 55 0.026 0.020 18 2-6-14 45 0.046 0.045 20 5-10-20 65 0.024 0.021 18 3-8-17 45 0.071 0.070 17 5-10-20 78 0.030 0.028 20 5-10-19 90 0.052 0.051 19 7-12-20

50 0.051 0.046 27 6-11-22 75 0.048 0.037 26 5-10-18 60 0.082 0.080 27 8-13-26 90 0.045 0.039 26 7-12-20 60 0.126 0.124 24 8-13-26 105 0.055 0.051 27 9-13-22 120 0.093 0.091 26 10-15-23

65 0.086 0.078 33 9-14-28 95 0.076 0.060 31 7-12-21 75 0.128 0.124 32 11-16-31 115 0.074 0.064 32 10-15-23 75 0.197 0.194 29 11-16-31 133 0.088 0.081 32 11-17-24 150 0.145 0.142 31 13-18-26

80 0.130 0.118 38 12-17-32 115 0.112 0.088 36 10-15-23 90 0.185 0.179 36 13-20-34 140 0.109 0.096 36 12-18-25 90 0.283 0.280 34 13-20-34 160 0.128 0.119 37 14-19-27 180 0.209 0.205 35 15-20-28

95 0.183 0.167 42 14-21-34 135 0.154 0.121 40 12-17-25 105 0.251 0.244 40 15-23-36 165 0.151 0.133 40 14-19-27 105 0.385 0.381 37 15-23-36 188 0.176 0.163 41 16-21-29 210 0.284 0.278 39 18-22-31

110 0.246 0.224 45 16-24-37 155 0.203 0.160 43 13-19-26 120 0.328 0.318 43 17-26-39 190 0.201 0.176 44 16-21-29 120 0.503 0.498 41 17-26-39 215 0.231 0.214 44 18-22-31 240 0.371 0.364 42 19-23-33

120 0.278 0.252 41 17-26-39 153 0.299 0.258 36 13-19-26 130 0.206 0.194 39 19-28-40 210 0.280 0.250 40 18-22-31 165 0.285 0.275 42 24-32-45 235 0.236 0.216 40 19-23-33 283 0.225 0.214 40 21-25-36

140 0.378 0.343 45 20-30-42 175 0.394 0.340 40 15-20-28 150 0.274 0.258 43 22-31-43 240 0.366 0.326 43 19-23-33 190 0.378 0.365 45 28-34-49 270 0.312 0.285 43 20-25-35 325 0.298 0.283 43 22-27-38

ML-37 - ½-INCH SLOT SPACING WIDTH - TWO-SLOT - SUPPLY WITH MP-37 PLENUM 2 ft. 6-inch Inlet 4 ft.

PERFORMANCE DATA



12-inch 4 ft. Inlet

F36


20 40 0.008 0.031 0.007 0.028 15 1-2-8 4-8-17 40 63 0.021 0.050 0.018 0.043 15 1-3-10 3-7-16 30 50 0.011 0.030 0.010 0.029 17 2-5-13 6-11-22 60 90 0.023 0.051 0.020 0.046 20 3-7-15 7-12-20 40 65 0.017 0.044 0.016 0.043 20 4-8-17 9-14-28 60 95 0.015 0.039 0.014 0.035 18 3-7-15 7-12-21 70 113 0.014 0.036 0.013 0.034 18 4-9-18 10-14-23

60 0.069 0.063 25 8-13-26 85 0.093 0.080 22 6-11-20 70 0.060 0.056 24 10-15-30 120 0.091 0.082 27 10-15-23 90 0.085 0.082 28 13-20-34 130 0.072 0.066 26 11-17-24 155 0.068 0.064 26 13-19-26

80 0.123 0.112 32 12-17-32 108 0.149 0.128 28 9-14-22 90 0.099 0.093 30 13-20-34 150 0.143 0.127 32 13-18-26 115 0.138 0.134 34 17-25-38 165 0.116 0.106 31 14-19-27 198 0.110 0.105 32 17-21-30

100 0.193 0.175 37 15-22-35 130 0.218 0.187 33 11-17-24 110 0.147 0.139 35 16-24-37 180 0.206 0.183 36 15-20-28 140 0.205 0.198 38 20-30-42 200 0.171 0.156 36 17-21-30 240 0.162 0.155 36 19-23-33


Diffs

PERFORMANCE DATA




12-inch 4 ft. Inlet


30 0.010 0.009 1-3-10 50 0.016 0.011 1-3-10 40 0.014 0.013 2-5-14 60 0.013 0.010 2-4-13 50 0.024 0.023 3-7-18 70 0.013 0.011 2-5-15 90 0.018 0.017 4-8-19

50 0.028 0.024 16 3-7-18 80 0.040 0.029 16 3-6-17 65 0.038 0.035 18 5-12-23 95 0.031 0.025 16 4-9-20 75 0.054 0.052 18 7-13-27 110 0.032 0.027 17 5-12-22 140 0.044 0.041 19 9-15-25

70 0.055 0.047 24 6-12-25 110 0.076 0.055 24 5-12-22 90 0.072 0.067 26 10-16-32 130 0.059 0.047 24 8-14-24 100 0.096 0.092 25 12-18-35 150 0.059 0.051 24 10-16-26 190 0.080 0.076 26 13-20-29

90 0.092 0.077 30 10-16-32 140 0.124 0.089 29 9-15-25 115 0.118 0.109 31 14-20-38 165 0.095 0.076 29 12-17-27 125 0.149 0.144 31 15-22-40 190 0.094 0.081 30 13-20-29 240 0.128 0.120 31 17-23-33

110 0.137 0.115 34 13-20-37 170 0.182 0.131 34 12-18-28 140 0.174 0.161 36 17-25-42 200 0.139 0.111 34 14-21-30 150 0.215 0.207 35 18-27-43 230 0.138 0.119 34 16-23-32 290 0.187 0.176 36 20-26-36

130 0.191 0.161 38 15-23-40 200 0.252 0.181 38 14-21-30 165 0.242 0.224 40 20-29-45 235 0.192 0.154 38 16-23-33 175 0.292 0.281 39 21-31-47 270 0.190 0.164 38 19-25-35 340 0.257 0.242 40 23-28-39

150 0.255 0.214 42 18-27-43 230 0.334 0.239 41 16-23-32 190 0.321 0.296 43 23-34-49 270 0.253 0.203 41 19-25-35 200 0.382 0.367 42 24-35-50 310 0.251 0.216 41 22-26-37 390 0.339 0.318 43 24-30-42

130 0.143 0.113 39 13-20-40 200 0.218 0.147 38 12-18-30 153 0.129 0.113 38 16-23-44 235 0.152 0.114 38 14-21-33 165 0.136 0.126 38 17-25-45 260 0.128 0.103 38 16-24-34 315 0.130 0.116 38 19-27-38

150 0.190 0.150 42 15-23-43 230 0.288 0.194 42 14-21-32 175 0.170 0.149 42 18-27-47 270 0.200 0.150 41 16-24-35 190 0.180 0.167 41 20-29-49 300 0.170 0.137 41 18-26-37 360 0.170 0.152 41 22-28-40


ML-38, -TZ - ¾-INCH SLOT SPACING WIDTH - TWO-SLOT - SUPPLY WITH MP-38 PLENUM

F

ML-39 - 1-INCH SLOT SPACING WIDTH - TWO-SLOT - SUPPLY WITH MP-39 PLENUM 2 ft. 6-inch Inlet 4 ft.

2 ft.

4 ft.


12-inch 4 ft. Inlet

30 0.008 0.006 1-2-7 50 0.014 0.009 1-2-7 40 0.009 0.008 1-3-12 60 0.010 0.007 1-2-9 40 0.008 0.007 1-3-12 60 0.007 0.005 1-2-9 90 0.011 0.010 2-5-16

50 0.021 0.017 16 2-5-15 80 0.035 0.023 17 2-4-15 63 0.022 0.019 17 3-7-19 95 0.025 0.019 17 3-6-17 65 0.021 0.020 16 3-8-20 100 0.019 0.015 15 3-7-18 135 0.024 0.021 18 5-12-24

70 0.041 0.033 24 4-9-22 110 0.066 0.044 24 4-8-20 85 0.040 0.035 25 6-13-26 130 0.046 0.035 24 5-11-24 90 0.040 0.038 23 7-14-28 140 0.037 0.030 23 6-13-25 180 0.042 0.038 25 9-16-28

90 0.068 0.054 30 7-14-28 140 0.107 0.072 30 6-13-25 108 0.064 0.056 30 10-17-33 165 0.075 0.056 30 8-15-27 115 0.066 0.061 29 11-18-35 180 0.061 0.049 29 9-16-28 225 0.066 0.059 30 14-20-32

110 0.102 0.081 35 10-17-34 170 0.158 0.106 34 8-15-28 130 0.094 0.082 35 13-20-40 200 0.110 0.082 34 12-18-30 140 0.098 0.091 34 14-22-42 220 0.091 0.074 34 13-20-31 270 0.095 0.086 34 16-24-35


PERFORMANCE DATA

8-inch Inlet


F37

Diffs


PERFORMANCE DATA ML-37 - ½-INCH SLOT SPACING WIDTH - THREE-SLOT - SUPPLY WITH MP-37 PLENUM 2 ft. 6-inch Inlet 4 ft.


2 ft.

F

10-inch Inlet 4 ft.

12-inch 4 ft. Inlet


35 0.018 0.016 2-4-12 60 0.041 0.034 2-4-13 45 0.016 0.015 3-6-16 70 0.025 0.022 2-5-15 50 0.014 0.014 3-7-18 80 0.020 0.018 3-6-17 90 0.014 0.013 4-8-19

55 0.045 0.039 17 4-9-20 85 0.081 0.068 16 3-7-18 68 0.036 0.033 17 6-12-24 105 0.056 0.049 17 5-11-22 78 0.035 0.032 18 8-14-28 120 0.046 0.040 18 6-13-23 138 0.033 0.030 17 8-14-25

75 0.083 0.073 24 7-13-27 110 0.136 0.115 22 5-12-22 90 0.064 0.058 24 10-16-32 140 0.100 0.087 24 9-15-25 105 0.064 0.060 25 12-19-36 160 0.081 0.072 25 11-17-27 185 0.059 0.055 24 13-19-29

95 0.133 0.117 30 11-17-34 135 0.205 0.173 27 8-14-25 113 0.100 0.091 30 13-20-38 175 0.157 0.136 29 12-18-28 133 0.101 0.095 31 16-24-41 200 0.127 0.112 30 14-21-30 233 0.093 0.086 29 16-23-32

115 0.195 0.171 34 14-20-38 160 0.288 0.242 31 11-17-27 135 0.144 0.131 34 16-24-41 210 0.226 0.195 34 15-22-31 160 0.147 0.138 35 19-28-45 240 0.183 0.162 34 17-23-33 280 0.135 0.125 34 20-25-35

135 0.268 0.236 38 16-24-41 185 0.385 0.324 35 13-19-29 158 0.196 0.179 37 19-28-44 245 0.307 0.266 37 17-23-33 188 0.203 0.190 39 22-33-48 280 0.249 0.220 38 20-25-35 328 0.185 0.171 37 22-27-38

155 0.354 0.311 41 18-28-44 210 0.496 0.417 38 15-22-31 180 0.256 0.233 41 21-32-47 280 0.401 0.347 41 20-25-35 215 0.266 0.250 42 25-37-52 320 0.325 0.288 41 22-27-38 375 0.243 0.224 41 24-29-41

ML-38, -TZ - ¾-INCH SLOT SPACING WIDTH - THREE-SLOT - SUPPLY WITH MP-38 PLENUM 2 ft. 6-inch Inlet 4 ft.

PERFORMANCE DATA



12-inch 4 ft. Inlet

F38


40 0.012 0.009 1-2-10 70 0.025 0.017 1-3-11 50 0.012 0.010 2-4-15 80 0.016 0.012 2-4-14 60 0.014 0.013 2-6-17 100 0.017 0.013 2-6-17 120 0.016 0.014 4-8-21

65 0.032 0.025 16 3-7-19 108 0.060 0.039 17 3-6-18 80 0.030 0.026 17 4-10-23 125 0.040 0.029 17 4-9-21 95 0.036 0.033 18 6-14-28 150 0.038 0.030 18 6-12-26 180 0.036 0.031 18 8-15-28

90 0.062 0.048 23 6-13-26 145 0.109 0.072 24 5-12-25 110 0.058 0.049 24 8-16-32 170 0.073 0.053 24 7-15-28 130 0.068 0.062 25 12-19-38 200 0.068 0.053 25 10-17-30 240 0.063 0.055 25 14-21-33

115 0.101 0.078 29 9-17-33 183 0.173 0.113 29 8-16-29 140 0.093 0.080 30 14-20-41 215 0.117 0.086 29 11-18-31 165 0.110 0.100 31 16-24-45 250 0.106 0.083 30 14-21-34 300 0.099 0.086 30 17-26-37

140 0.150 0.115 34 14-20-41 220 0.251 0.165 34 12-19-31 170 0.137 0.118 34 16-25-46 260 0.172 0.125 34 15-22-34 200 0.161 0.146 36 19-29-50 300 0.152 0.120 35 17-26-37 360 0.142 0.125 35 21-28-40


165 0.209 0.160 38 16-24-45 258 0.344 0.226 38 15-22-34 200 0.190 0.163 38 19-29-50 305 0.236 0.172 38 17-26-37 235 0.222 0.202 39 23-34-54 350 0.208 0.163 38 20-28-40 420 0.193 0.169 38 24-31-43

190 0.277 0.212 41 18-28-49 295 0.452 0.296 41 17-25-36 230 0.252 0.215 42 22-33-54 350 0.311 0.227 41 20-28-40 270 0.293 0.267 43 26-39-58 400 0.271 0.213 41 23-30-42 480 0.252 0.221 41 27-33-46

Diffs

PERFORMANCE DATA




12-inch 4 ft. Inlet


40 0.010 0.007 1-2-6 70 0.023 0.014 1-2-7 50 0.016 0.014 1-3-10 80 0.014 0.009 1-2-9 60 0.009 0.008 2-4-15 90 0.011 0.008 1-3-12 100 0.008 0.006 2-4-14

65 0.027 0.019 16 2-4-16 108 0.054 0.034 17 2-4-16 80 0.040 0.036 17 3-6-20 125 0.034 0.023 17 2-6-19 95 0.024 0.020 18 4-9-24 140 0.027 0.020 17 3-7-21 165 0.021 0.017 17 4-10-24

90 0.051 0.037 24 4-8-23 145 0.099 0.061 24 3-8-21 110 0.076 0.068 24 5-12-28 170 0.063 0.043 24 5-10-25 130 0.044 0.038 26 8-16-33 190 0.049 0.036 24 6-13-28 230 0.041 0.034 24 8-17-32

115 0.083 0.060 30 6-13-29 183 0.157 0.097 30 5-12-27 140 0.124 0.110 30 9-18-35 215 0.100 0.069 30 7-16-31 165 0.071 0.061 31 12-21-41 240 0.079 0.058 30 9-18-33 295 0.067 0.055 30 14-22-36

140 0.124 0.089 34 9-18-35 220 0.228 0.141 34 8-16-31 170 0.182 0.162 35 13-21-43 260 0.147 0.100 34 11-19-34 200 0.104 0.090 36 17-25-50 290 0.115 0.084 34 13-21-36 360 0.100 0.082 35 18-27-40

165 0.172 0.123 38 12-21-41 258 0.312 0.194 38 11-19-34 200 0.252 0.225 39 17-25-50 305 0.202 0.138 38 15-23-37 235 0.144 0.124 40 20-30-54 340 0.158 0.116 38 17-25-39 425 0.139 0.114 39 21-31-44

190 0.228 0.163 41 16-24-48 295 0.410 0.254 41 14-22-36 230 0.334 0.297 42 19-29-54 350 0.266 0.182 41 17-26-40 270 0.190 0.164 43 23-34-58 390 0.208 0.152 41 19-29-42 490 0.185 0.152 42 24-33-47

153 0.299 0.258 36 16-23-44 183 0.350 0.291 30 10-17-29 200 0.254 0.227 39 21-31-50 273 0.341 0.290 35 16-25-35 235 0.236 0.216 40 24-36-54 340 0.316 0.274 38 21-28-39 425 0.244 0.220 39 25-31-44

175 0.394 0.340 40 18-27-47 205 0.442 0.367 33 12-19-30 230 0.336 0.300 42 24-35-54 315 0.456 0.387 39 19-27-38 270 0.312 0.285 43 28-41-58 390 0.415 0.360 41 24-30-42 490 0.325 0.292 42 27-33-47


ML-39 - 1-INCH SLOT SPACING WIDTH - THREE-SLOT - SUPPLY WITH MP-39 PLENUM

F

ML-37 - ½-INCH SLOT SPACING WIDTH - FOUR-SLOT - SUPPLY WITH MP--37 PLENUM 2 ft. 6-inch Inlet 4 ft.

2 ft.

4 ft.


12-inch 4 ft. Inlet

40 0.021 0.018 1-3-12 70 0.052 0.043 1-3-13 50 0.016 0.014 2-5-15 60 0.017 0.014 1-2-9 60 0.015 0.014 3-7-18 90 0.022 0.019 2-5-16 100 0.014 0.012 3-7-18

63 0.050 0.043 15 3-7-19 93 0.090 0.075 14 2-6-17 80 0.041 0.036 17 5-12-25 103 0.048 0.041 12 3-7-19 95 0.039 0.035 18 7-15-29 140 0.054 0.046 17 6-13-25 165 0.037 0.033 17 8-15-27

85 0.093 0.080 22 6-13-26 115 0.139 0.116 19 4-9-21 110 0.077 0.069 25 10-17-34 145 0.097 0.082 21 6-13-26 130 0.072 0.066 26 13-20-40 190 0.099 0.086 24 11-17-29 230 0.072 0.064 25 14-21-32

108 0.149 0.128 28 10-17-33 138 0.199 0.165 23 6-12-25 140 0.125 0.111 30 14-22-42 188 0.161 0.137 27 10-17-29 165 0.116 0.106 31 17-25-45 240 0.157 0.136 30 15-22-33 295 0.118 0.106 30 18-26-36

130 0.218 0.187 33 13-20-40 160 0.269 0.224 27 7-15-27 170 0.184 0.164 35 17-26-46 230 0.243 0.206 31 14-21-32 200 0.171 0.156 36 21-31-50 290 0.230 0.199 34 18-26-36 360 0.175 0.158 35 22-28-40


PERFORMANCE DATA

8-inch Inlet


F39

Diffs


PERFORMANCE DATA ML-38, -TZ - ¾-INCH SLOT SPACING WIDTH - FOUR-SLOT - SUPPLY WITH MP-38 PLENUM 2 ft. 6-inch Inlet 4 ft.


2 ft.

F

10-inch Inlet 4 ft.

12-inch 4 ft. Inlet


50 0.016 0.011 1-3-10 90 0.038 0.024 1-3-12 70 0.017 0.014 2-5-18 100 0.022 0.015 2-4-14 70 0.013 0.011 2-5-18 120 0.020 0.014 2-5-18 130 0.013 0.011 3-6-19

80 0.040 0.029 16 3-6-20 125 0.074 0.046 16 2-6-19 105 0.038 0.031 19 5-11-26 155 0.052 0.036 17 4-9-23 110 0.032 0.027 17 5-12-28 185 0.047 0.034 19 5-12-27 210 0.034 0.028 18 7-16-31

110 0.076 0.055 24 5-12-28 160 0.121 0.075 22 4-9-24 140 0.068 0.055 25 9-18-35 210 0.096 0.065 24 7-16-31 150 0.059 0.051 24 10-19-38 250 0.085 0.063 26 10-19-34 290 0.065 0.053 25 13-21-36

140 0.124 0.089 29 9-18-35 195 0.179 0.111 27 6-14-29 175 0.106 0.085 31 14-22-44 265 0.152 0.104 30 11-20-35 190 0.094 0.081 30 16-24-48 315 0.135 0.099 31 16-23-38 370 0.105 0.087 31 18-27-41

170 0.182 0.131 34 13-21-43 230 0.249 0.155 31 8-17-32 210 0.153 0.123 35 18-26-51 320 0.222 0.152 34 16-24-38 230 0.138 0.119 34 19-29-54 380 0.197 0.145 36 19-28-41 450 0.156 0.128 36 22-32-45

200 0.252 0.181 38 17-25-50 265 0.331 0.205 34 11-20-35 245 0.209 0.167 39 21-31-55 375 0.305 0.208 38 19-28-41 270 0.190 0.164 38 23-34-58 445 0.270 0.198 39 22-32-45 530 0.216 0.178 39 26-35-49

230 0.334 0.239 41 19-29-54 300 0.424 0.263 37 14-22-37 280 0.272 0.218 42 23-35-59 430 0.401 0.274 41 21-31-44 310 0.251 0.216 41 26-39-62 510 0.355 0.261 43 25-34-48 610 0.286 0.236 43 30-37-52

213 0.246 0.165 40 13-23-46 290 0.368 0.218 36 9-19-36 235 0.301 0.263 38 16-26-51 390 0.294 0.189 39 16-25-42 270 0.138 0.111 39 20-29-58 415 0.200 0.137 38 18-27-43 520 0.159 0.123 39 22-33-48

245 0.327 0.220 43 18-27-53 330 0.477 0.282 39 11-21-39 270 0.397 0.347 41 20-29-58 450 0.391 0.251 43 19-29-45 310 0.181 0.147 42 22-34-62 480 0.267 0.184 42 21-31-46 600 0.212 0.164 43 26-37-52

ML-39 - 1-INCH SLOT SPACING WIDTH - FOUR-SLOT - SUPPLY WITH MP-39 PLENUM 2 ft. 6-inch Inlet 4 ft.

PERFORMANCE DATA



12-inch 4 ft. Inlet

F40


50 0.014 0.009 1-2-7 90 0.035 0.021 1-2-8 60 0.020 0.017 1-2-9 90 0.016 0.010 1-2-8 70 0.009 0.007 1-3-13 90 0.009 0.006 1-2-8 120 0.008 0.007 1-3-13

83 0.037 0.025 17 2-4-18 130 0.074 0.044 17 2-4-16 95 0.049 0.043 17 3-6-21 150 0.043 0.028 17 2-5-19 110 0.023 0.018 17 4-8-24 155 0.028 0.019 15 2-6-20 200 0.024 0.018 17 4-9-26

115 0.072 0.048 25 4-9-25 170 0.127 0.075 24 3-7-22 130 0.092 0.080 24 5-11-28 210 0.085 0.055 25 5-10-27 150 0.042 0.034 25 7-15-33 220 0.056 0.039 23 5-11-28 280 0.046 0.036 25 8-18-35

148 0.119 0.080 31 6-14-32 210 0.193 0.114 29 5-10-27 165 0.148 0.130 30 8-18-36 270 0.141 0.090 31 8-17-35 190 0.068 0.055 30 11-21-41 285 0.094 0.065 29 8-18-36 360 0.076 0.059 31 13-23-40

180 0.177 0.119 36 9-20-39 250 0.274 0.162 33 6-15-32 200 0.218 0.190 34 12-22-44 330 0.210 0.135 35 11-21-39 230 0.100 0.081 35 15-25-50 350 0.142 0.098 34 13-22-40 440 0.114 0.088 35 19-28-44


Diffs

PERFORMANCE DATA




12-inch 4 ft. Inlet


15 0.012 0.011 1-3-10 30 0.021 0.019 2-5-9 20 0.021 0.021 3-6-13 35 0.018 0.017 3-5-10 25 0.047 0.047 4-8-16 40 0.020 0.019 4-6-10 45 0.030 0.029 5-7-11

25 0.032 0.031 17 4-8-16 45 0.047 0.043 20 5-7-11 30 0.048 0.047 17 6-10-19 53 0.040 0.038 20 5-8-12 35 0.092 0.092 18 8-11-21 63 0.049 0.048 21 6-9-13 68 0.067 0.066 19 7-9-13

35 0.063 0.061 25 8-11-21 60 0.083 0.077 27 6-9-13 40 0.085 0.084 24 9-13-23 70 0.071 0.068 26 7-10-14 45 0.152 0.151 24 10-15-24 85 0.091 0.088 28 9-11-15 90 0.119 0.118 26 9-11-15

45 0.105 0.101 31 10-15-24 75 0.130 0.120 32 8-10-14 50 0.133 0.132 29 11-16-25 88 0.111 0.106 32 9-11-15 55 0.227 0.226 29 12-18-26 108 0.145 0.141 34 10-12-17 113 0.186 0.184 31 10-12-17

55 0.156 0.151 35 12-18-26 90 0.187 0.172 36 9-11-15 60 0.192 0.190 33 13-19-28 105 0.161 0.153 36 10-12-17 65 0.317 0.316 33 14-20-29 130 0.212 0.206 38 11-13-19 135 0.267 0.265 35 11-13-19

65 0.218 0.211 39 14-20-29 105 0.254 0.235 40 10-12-17 70 0.262 0.258 37 15-21-30 123 0.219 0.208 40 10-13-18 75 0.423 0.421 36 16-22-31 153 0.291 0.283 42 12-14-20 158 0.364 0.360 39 12-14-20

75 0.291 0.281 43 16-22-31 120 0.332 0.306 43 10-13-18 80 0.342 0.337 40 17-23-32 140 0.285 0.272 43 11-14-19 85 0.543 0.540 39 18-23-33 175 0.384 0.373 45 12-15-22 180 0.475 0.471 42 13-15-22


ML-37-SP - ½-INCH SLOT SPACING WIDTH - ONE-SLOT - SUPPLY WITH MP-37-SP PLENUM

F

ML-38-SP, -TZ - ¾-INCH SLOT SPACING WIDTH - ONE-SLOT - SUPPLY WITH MP-38-SP PLENUM 2 ft. 6-inch Inlet 4 ft.

2 ft.

4 ft.


12-inch 4 ft. Inlet

20 0.017 0.017 1-3-11 35 0.017 0.014 2-4-9 25 0.044 0.043 2-5-13 40 0.017 0.016 2-5-10 30 0.138 0.137 3-7-16 40 0.018 0.018 2-5-10 55 0.068 0.067 4-7-12

33 0.046 0.044 18 4-9-17 55 0.041 0.036 20 4-7-12 35 0.086 0.085 16 4-9-18 68 0.049 0.045 21 6-8-13 35 0.187 0.187 13 4-9-18 65 0.048 0.047 17 5-8-13 70 0.110 0.109 15 6-9-14

45 0.088 0.085 26 7-12-24 75 0.076 0.066 27 6-9-14 45 0.142 0.140 22 7-12-24 95 0.096 0.090 29 8-11-16 40 0.245 0.244 16 6-11-21 90 0.093 0.090 25 7-11-15 85 0.162 0.161 19 7-11-15

58 0.144 0.138 31 10-15-27 95 0.122 0.106 33 8-11-16 55 0.212 0.209 26 10-15-26 123 0.160 0.150 35 10-13-18 45 0.310 0.309 19 7-12-24 115 0.151 0.146 31 10-12-18 100 0.224 0.222 23 8-12-16

70 0.213 0.205 36 12-18-30 115 0.179 0.155 37 10-12-18 65 0.295 0.293 30 11-17-29 150 0.240 0.224 40 12-14-20 50 0.383 0.382 21 9-13-25 140 0.224 0.217 35 11-14-19 115 0.296 0.294 26 10-12-18


83 0.297 0.284 40 15-22-32 135 0.247 0.214 41 11-13-19 75 0.393 0.389 34 13-20-31 178 0.336 0.314 44 13-15-22 55 0.463 0.462 24 10-15-26 165 0.311 0.301 39 12-15-21 130 0.378 0.376 29 11-13-19

95 0.393 0.377 43 17-25-35 155 0.325 0.282 44 12-14-20 85 0.505 0.500 37 15-22-33 205 0.448 0.419 47 14-17-23 60 0.551 0.550 26 11-16-28 190 0.413 0.400 42 13-16-23 145 0.470 0.467 32 11-14-20

PERFORMANCE DATA

8-inch Inlet


F41

Diffs


PERFORMANCE DATA ML-39-SP - 1-INCH SLOT SPACING WIDTH - ONE-SLOT - SUPPLY WITH MP-39-SP PLENUM 2 ft. 6-inch Inlet 4 ft.


2 ft.

F

10-inch Inlet 4 ft.

12-inch 4 ft. Inlet


20 0.010 0.009 1-2-8 35 0.012 0.010 1-2-8 30 0.025 0.024 13 2-5-14 40 0.011 0.010 1-3-9 30 0.038 0.037 2-5-14 50 0.015 0.014 11 2-5-11 60 0.028 0.027 11 3-6-13

35 0.030 0.028 20 3-6-16 55 0.031 0.025 20 2-6-12 45 0.055 0.054 22 5-10-21 65 0.028 0.025 20 3-7-13 43 0.076 0.075 18 4-9-19 78 0.036 0.034 22 5-8-14 90 0.063 0.061 21 6-10-15

50 0.061 0.056 29 6-11-23 75 0.057 0.047 28 5-8-14 60 0.098 0.096 29 8-14-27 90 0.054 0.048 28 6-10-15 55 0.127 0.125 24 7-13-25 105 0.066 0.062 29 8-11-17 120 0.111 0.109 28 9-13-18

65 0.103 0.095 35 10-15-29 95 0.091 0.075 33 7-10-16 75 0.154 0.150 34 11-17-31 115 0.088 0.079 34 8-12-18 68 0.191 0.189 29 10-15-29 133 0.105 0.099 34 10-13-19 150 0.174 0.171 33 11-14-20

80 0.155 0.144 40 12-18-32 115 0.134 0.110 38 8-12-18 90 0.221 0.216 38 14-21-34 140 0.131 0.117 38 10-14-19 80 0.268 0.265 33 12-18-32 160 0.153 0.144 39 11-15-21 180 0.250 0.246 37 13-15-22

95 0.219 0.203 44 14-22-35 135 0.184 0.152 42 10-13-19 105 0.301 0.293 42 16-24-37 165 0.181 0.163 42 12-15-21 93 0.358 0.355 36 14-21-34 188 0.210 0.197 43 13-16-22 210 0.340 0.334 41 14-17-24

110 0.294 0.272 47 17-25-37 155 0.243 0.200 45 11-14-20 120 0.393 0.383 45 18-27-39 190 0.240 0.215 46 13-16-23 105 0.461 0.457 39 16-24-37 215 0.276 0.260 46 14-17-24 240 0.445 0.437 44 15-18-25

ML-37-SP - ½-INCH SLOT SPACING WIDTH - TWO-SLOT - SUPPLY WITH MP-37-SP PLENUM 2 ft. 6-inch Inlet 4 ft.

PERFORMANCE DATA



12-inch 4 ft. Inlet

F42


20 0.009 0.009 1-2-8 40 0.025 0.022 1-3-9 30 0.013 0.012 2-5-14 50 0.019 0.017 2-5-11 40 0.020 0.019 4-6-10 55 0.015 0.014 2-6-12 70 0.017 0.016 4-8-14

40 0.037 0.034 17 4-8-18 63 0.060 0.053 17 3-7-13 53 0.040 0.038 20 6-12-24 80 0.049 0.044 19 5-9-15 65 0.053 0.051 22 7-9-13 88 0.039 0.036 18 6-9-15 113 0.043 0.041 20 8-12-17

60 0.083 0.077 27 8-14-27 85 0.111 0.098 24 6-9-15 75 0.082 0.078 28 11-17-31 110 0.092 0.084 27 8-12-17 90 0.101 0.099 30 9-11-15 120 0.074 0.068 26 9-13-18 155 0.081 0.078 28 11-14-20

80 0.148 0.136 34 12-18-32 108 0.178 0.157 30 8-12-17 98 0.138 0.132 34 15-22-35 140 0.149 0.136 32 10-14-19 115 0.166 0.161 36 10-12-18 153 0.119 0.111 32 11-14-20 198 0.132 0.126 34 13-16-23

100 0.231 0.213 39 15-23-36 130 0.260 0.230 35 9-13-19 120 0.210 0.200 39 18-27-39 170 0.220 0.200 37 12-15-21 140 0.246 0.238 40 11-14-19 185 0.175 0.163 36 13-16-22 240 0.194 0.187 38 15-18-25


120 0.332 0.306 43 18-27-39 153 0.358 0.317 38 11-14-20 143 0.296 0.282 43 22-30-43 200 0.304 0.277 41 13-16-23 165 0.341 0.331 44 12-15-21 218 0.242 0.225 40 14-17-24 283 0.269 0.259 42 16-19-27

140 0.452 0.417 47 21-30-42 175 0.472 0.417 42 12-15-22 165 0.396 0.378 47 25-32-46 230 0.402 0.366 44 14-18-25 190 0.452 0.439 47 13-16-23 250 0.320 0.297 43 15-18-26 325 0.356 0.342 45 17-21-29

Diffs

PERFORMANCE DATA




12-inch 4 ft. Inlet


30 0.012 0.011 1-3-10 50 0.019 0.014 1-3-9 40 0.017 0.016 2-5-15 60 0.015 0.013 2-4-11 50 0.029 0.028 3-6-12 70 0.015 0.014 2-5-12 90 0.022 0.021 4-8-15

50 0.034 0.029 18 3-7-19 80 0.048 0.037 18 3-6-14 65 0.045 0.042 20 5-12-24 93 0.036 0.030 18 4-8-16 75 0.064 0.062 20 6-9-14 110 0.038 0.033 19 5-10-17 143 0.054 0.051 21 8-13-19

70 0.066 0.058 26 6-13-26 110 0.091 0.070 26 5-10-17 90 0.086 0.081 28 10-17-34 125 0.065 0.054 25 7-11-18 100 0.114 0.111 27 8-12-16 150 0.070 0.062 26 9-13-20 195 0.101 0.096 28 11-16-23

90 0.110 0.095 32 10-17-34 140 0.148 0.113 31 8-12-19 115 0.141 0.132 33 14-21-38 158 0.103 0.086 30 9-14-20 125 0.179 0.173 33 10-13-18 190 0.113 0.100 32 11-16-23 248 0.163 0.155 34 15-18-26

110 0.164 0.142 36 14-21-37 170 0.218 0.167 36 10-15-21 140 0.209 0.195 38 17-26-42 190 0.150 0.125 35 11-16-23 150 0.257 0.249 37 12-14-20 230 0.165 0.146 36 13-18-25 300 0.240 0.228 39 16-20-28

130 0.229 0.199 40 16-24-41 200 0.302 0.231 40 12-16-23 165 0.290 0.271 42 21-31-46 223 0.206 0.172 38 13-17-24 175 0.350 0.339 41 12-15-22 270 0.228 0.201 40 15-19-27 353 0.331 0.314 42 18-22-31

150 0.305 0.265 44 19-28-44 230 0.399 0.305 43 13-18-25 190 0.385 0.360 45 24-35-49 255 0.271 0.226 42 15-18-26 200 0.457 0.443 44 13-16-23 310 0.300 0.265 43 17-20-29 405 0.437 0.415 46 19-23-33


ML-38-SP, -TZ - ¾-INCH SLOT SPACING WIDTH - TWO-SLOT - SUPPLY WITH MP-38-SP PLENUM

F

ML-39-SP - 1-INCH SLOT SPACING WIDTH - TWO-SLOT - SUPPLY WITH MP-SP- PLENUM 2 ft. 6-inch Inlet 4 ft.

2 ft.

4 ft.


12-inch 4 ft. Inlet

30 0.009 0.008 1-2-7 50 0.016 0.012 1-2-7 40 0.011 0.010 1-3-12 60 0.012 0.009 1-2-9 40 0.010 0.009 1-3-12 60 0.008 0.007 1-2-9 90 0.013 0.012 2-5-14

53 0.028 0.023 19 2-5-17 83 0.044 0.032 19 2-4-13 65 0.028 0.025 20 3-8-21 98 0.031 0.025 19 3-6-15 70 0.029 0.028 19 4-9-23 105 0.025 0.021 18 3-7-16 140 0.031 0.028 21 6-11-19

75 0.057 0.047 28 5-10-24 115 0.086 0.063 27 4-9-18 90 0.054 0.048 28 7-15-29 135 0.060 0.047 27 5-10-19 100 0.060 0.056 28 8-16-32 150 0.051 0.043 27 7-11-20 190 0.057 0.052 28 10-14-23

98 0.096 0.079 34 8-16-32 148 0.142 0.103 33 6-11-20 115 0.088 0.079 34 11-19-37 173 0.098 0.077 33 9-13-21 130 0.101 0.095 34 14-21-41 195 0.086 0.072 33 10-15-23 240 0.090 0.082 34 12-18-25

120 0.146 0.120 39 12-19-39 180 0.211 0.153 38 9-14-22 140 0.131 0.117 38 15-23-42 210 0.145 0.115 37 11-16-24 160 0.153 0.144 39 17-26-45 240 0.130 0.109 38 12-18-25 290 0.132 0.120 38 15-20-28


143 0.205 0.169 43 15-23-43 213 0.295 0.214 42 11-16-24 165 0.181 0.163 42 18-27-46 248 0.201 0.159 41 13-18-26 190 0.216 0.203 43 20-31-49 285 0.184 0.154 42 14-19-28 340 0.181 0.165 42 17-21-30

165 0.275 0.227 46 18-27-46 245 0.392 0.284 45 12-18-26 190 0.240 0.215 46 20-31-49 285 0.267 0.211 45 14-19-28 220 0.289 0.272 46 24-36-53 330 0.246 0.207 45 17-21-30 390 0.238 0.218 45 19-23-32

PERFORMANCE DATA

8-inch Inlet


F43

Diffs


PERFORMANCE DATA ML-37-SP - ½-INCH SLOT SPACING WIDTH - THREE-SLOT - SUPPLY WITH MP-37-SP PLENUM 2 ft. 6-inch Inlet 4 ft.


2 ft.

F

10-inch Inlet 4 ft.

12-inch 4 ft. Inlet


35 0.022 0.019 2-4-13 60 0.049 0.042 2-4-11 45 0.019 0.018 3-6-17 70 0.030 0.027 2-5-12 50 0.017 0.016 3-7-19 80 0.024 0.022 3-6-14 90 0.017 0.016 4-8-15

55 0.053 0.048 19 4-9-21 80 0.086 0.075 17 3-6-14 70 0.046 0.043 20 6-13-26 105 0.068 0.060 19 5-9-17 78 0.041 0.039 20 8-14-29 118 0.052 0.047 19 6-10-18 138 0.039 0.037 19 8-12-19

75 0.099 0.089 26 7-14-28 100 0.135 0.117 22 4-9-16 95 0.085 0.079 28 11-18-35 140 0.120 0.107 26 8-12-19 105 0.076 0.072 27 13-20-37 155 0.091 0.082 26 9-14-20 185 0.071 0.066 26 11-16-22

95 0.159 0.143 32 11-18-35 120 0.194 0.168 26 6-11-18 120 0.136 0.126 33 15-22-39 175 0.188 0.166 31 10-15-22 133 0.121 0.115 33 16-25-41 193 0.141 0.127 31 11-16-23 233 0.112 0.105 31 14-18-25

115 0.233 0.210 36 14-21-38 140 0.264 0.229 30 8-12-19 145 0.199 0.184 38 18-27-43 210 0.270 0.240 36 12-17-24 160 0.177 0.167 37 20-30-45 230 0.201 0.182 35 13-18-25 280 0.162 0.152 36 16-19-27

135 0.321 0.289 40 17-25-41 160 0.345 0.299 33 9-14-21 170 0.273 0.253 41 21-32-46 245 0.368 0.326 39 14-18-26 188 0.242 0.230 41 23-35-49 268 0.272 0.246 39 15-19-27 328 0.222 0.207 39 17-21-30

155 0.424 0.381 43 19-29-44 180 0.436 0.379 36 11-15-22 195 0.359 0.333 45 24-35-50 280 0.480 0.426 43 16-19-27 215 0.319 0.302 44 27-37-52 305 0.353 0.319 42 16-20-29 375 0.291 0.272 43 18-22-32

ML-38-SP, -TZ - ¾-INCH SLOT SPACING WIDTH - THREE-SLOT - SUPPLY WITH MP-38-SP PLENUM 2 ft. 6-inch Inlet 4 ft.

PERFORMANCE DATA



12-inch 4 ft. Inlet

F44


40 0.015 0.012 1-2-10 70 0.030 0.022 1-3-10 50 0.014 0.013 2-4-15 80 0.019 0.015 2-4-11 60 0.017 0.016 2-6-18 100 0.020 0.017 2-6-14 120 0.019 0.017 4-8-17

65 0.039 0.031 18 3-7-20 108 0.072 0.051 19 3-6-15 80 0.036 0.032 19 4-10-24 130 0.051 0.040 19 4-9-19 100 0.048 0.045 21 7-15-30 155 0.049 0.040 21 6-11-20 185 0.045 0.040 21 8-13-22

90 0.074 0.060 25 6-13-27 145 0.131 0.093 26 5-10-20 110 0.069 0.061 26 8-17-34 180 0.099 0.076 27 8-13-22 140 0.094 0.087 29 14-21-42 210 0.089 0.073 28 10-15-24 250 0.082 0.074 28 12-18-26

115 0.121 0.098 31 9-18-35 183 0.207 0.147 31 8-13-22 140 0.112 0.098 32 14-21-42 230 0.161 0.124 33 11-17-25 180 0.156 0.144 35 18-27-48 265 0.142 0.117 34 13-19-27 315 0.130 0.117 34 15-20-29

140 0.180 0.145 36 14-21-42 220 0.301 0.214 36 11-16-24 170 0.165 0.145 36 17-26-46 280 0.238 0.184 38 13-19-27 220 0.233 0.215 40 22-34-53 320 0.208 0.171 38 15-21-29 380 0.189 0.170 38 18-23-32


165 0.250 0.201 40 17-25-46 258 0.412 0.294 40 12-18-26 200 0.228 0.200 40 20-30-50 330 0.331 0.256 41 16-21-30 260 0.325 0.301 44 26-40-57 375 0.285 0.234 42 18-22-32 445 0.260 0.233 42 20-24-34

190 0.331 0.267 43 19-29-49 295 0.541 0.385 43 14-20-28 230 0.301 0.265 44 23-35-54 380 0.439 0.339 45 18-23-32 300 0.433 0.401 47 30-44-62 430 0.375 0.308 45 20-24-34 510 0.341 0.306 45 21-26-37

Diffs

PERFORMANCE DATA




12-inch 4 ft. Inlet


40 0.012 0.009 1-2-6 70 0.028 0.019 1-2-7 50 0.019 0.017 1-3-10 80 0.017 0.012 1-2-9 60 0.011 0.010 2-4-15 90 0.013 0.010 1-3-11 100 0.009 0.008 2-4-12

70 0.037 0.028 20 2-5-18 108 0.065 0.045 19 2-4-13 80 0.048 0.044 19 3-6-21 135 0.047 0.035 21 3-7-17 100 0.031 0.028 22 4-10-26 148 0.036 0.028 20 3-8-18 165 0.025 0.021 19 4-10-21

100 0.076 0.058 28 4-10-26 145 0.119 0.081 26 3-8-18 110 0.091 0.083 26 5-12-29 190 0.094 0.069 29 6-12-23 140 0.061 0.054 29 9-18-37 205 0.069 0.053 28 7-13-23 230 0.049 0.042 26 8-14-25

130 0.128 0.097 34 8-17-34 183 0.188 0.128 32 5-11-22 140 0.148 0.134 32 9-18-37 245 0.156 0.115 35 10-15-26 180 0.101 0.090 35 15-24-48 263 0.113 0.088 34 11-16-26 295 0.080 0.068 32 12-18-28

160 0.193 0.148 39 12-21-42 220 0.273 0.186 36 8-14-24 170 0.218 0.198 37 13-22-45 300 0.234 0.172 40 12-19-28 220 0.151 0.134 40 19-29-53 320 0.167 0.130 38 13-20-29 360 0.119 0.102 37 15-22-31

190 0.273 0.208 43 16-25-49 258 0.374 0.255 40 11-16-26 200 0.302 0.274 41 18-26-50 355 0.328 0.241 44 15-22-31 260 0.211 0.187 44 23-34-57 378 0.233 0.181 42 16-22-32 425 0.166 0.142 41 18-24-34

220 0.365 0.279 47 19-29-53 295 0.491 0.335 43 12-18-28 230 0.399 0.363 44 20-30-54 410 0.437 0.321 47 17-23-33 300 0.281 0.249 48 26-40-62 435 0.309 0.241 46 18-24-34 490 0.221 0.189 44 20-26-36


ML-39-SP - 1-INCH SLOT SPACING WIDTH - THREE-SLOT - SUPPLY WITH MP-39-SP PLENUM

F

ML-37-SP - ½-INCH SLOT SPACING WIDTH - FOUR-SLOT - SUPPLY WITH MP-37-SP PLENUM 2 ft. 6-inch Inlet 4 ft.

2 ft.

4 ft.


12-inch 4 ft. Inlet

40 0.025 0.022 1-3-12 70 0.062 0.053 1-3-11 50 0.019 0.017 2-5-16 60 0.020 0.017 1-2-9 60 0.018 0.017 3-6-13 90 0.026 0.024 2-5-14 100 0.016 0.015 3-7-15

63 0.060 0.053 17 3-7-20 90 0.102 0.088 15 2-5-14 80 0.049 0.044 19 5-12-26 98 0.052 0.046 13 3-6-15 98 0.049 0.045 21 7-11-16 140 0.064 0.057 19 6-11-19 165 0.044 0.040 19 8-13-21

85 0.111 0.098 24 6-13-27 110 0.152 0.131 20 4-8-17 110 0.092 0.084 27 10-18-36 135 0.100 0.088 21 5-10-19 135 0.093 0.087 29 10-13-19 190 0.118 0.105 26 10-14-23 230 0.086 0.079 27 12-18-25

108 0.178 0.157 30 10-17-35 130 0.213 0.183 24 5-10-19 140 0.149 0.136 32 15-23-42 173 0.164 0.143 27 9-13-21 173 0.152 0.141 35 12-15-21 240 0.188 0.167 32 12-18-25 295 0.141 0.129 32 15-20-28

130 0.260 0.230 35 14-21-41 150 0.283 0.243 27 7-11-20 170 0.220 0.200 37 18-27-46 210 0.242 0.212 31 11-16-24 210 0.226 0.210 39 14-17-24 290 0.275 0.244 36 15-20-28 360 0.210 0.192 37 18-22-31


153 0.358 0.317 38 16-25-44 170 0.364 0.312 30 8-13-21 200 0.304 0.277 41 22-32-50 248 0.337 0.294 35 13-18-26 248 0.313 0.291 43 15-18-26 340 0.378 0.336 40 17-21-30 425 0.292 0.268 41 19-24-34

175 0.472 0.417 42 19-28-47 190 0.455 0.390 33 10-14-23 230 0.402 0.366 44 25-37-54 285 0.446 0.390 39 14-19-28 285 0.416 0.386 46 16-19-28 390 0.497 0.442 43 19-23-32 490 0.389 0.356 44 21-26-36

PERFORMANCE DATA

8-inch Inlet


F45

Diffs


PERFORMANCE DATA ML-38-SP, -TZ - ¾-INCH SLOT SPACING WIDTH - FOUR-SLOT - SUPPLY WITH MP-38-SP PLENUM 2 ft. 6-inch Inlet 4 ft.


2 ft.

F

10-inch Inlet 4 ft.

12-inch 4 ft. Inlet


50 0.019 0.014 1-3-10 90 0.046 0.031 1-3-11 70 0.020 0.017 2-5-18 100 0.026 0.019 2-4-12 70 0.015 0.014 2-5-12 120 0.024 0.018 2-5-15 130 0.016 0.013 3-6-16

80 0.048 0.037 18 3-6-21 123 0.085 0.058 18 2-5-15 105 0.046 0.038 21 5-11-28 155 0.062 0.046 19 4-9-19 110 0.038 0.033 19 5-10-17 185 0.056 0.044 21 5-12-22 210 0.041 0.035 20 7-13-24

110 0.091 0.070 26 5-12-29 155 0.135 0.093 23 4-9-19 140 0.082 0.068 27 9-18-37 210 0.115 0.084 26 7-13-24 150 0.070 0.062 26 9-13-20 250 0.102 0.079 28 10-16-26 290 0.077 0.066 27 12-18-28

140 0.148 0.113 31 9-18-37 188 0.198 0.135 28 6-12-22 175 0.127 0.106 33 14-23-46 265 0.183 0.134 32 11-16-27 190 0.113 0.100 32 11-16-23 315 0.162 0.126 33 13-20-29 370 0.126 0.107 33 15-22-31

170 0.218 0.167 36 13-22-45 220 0.273 0.186 31 8-14-24 210 0.183 0.153 37 18-28-52 320 0.266 0.196 36 13-20-29 230 0.165 0.146 36 13-18-25 380 0.236 0.184 38 16-23-32 450 0.186 0.159 38 19-25-35

200 0.302 0.231 40 18-26-50 253 0.359 0.245 35 10-16-26 245 0.250 0.208 41 22-32-56 375 0.366 0.269 40 16-22-32 270 0.228 0.201 40 15-19-27 445 0.324 0.252 41 18-24-34 530 0.258 0.221 41 22-27-38

230 0.399 0.305 43 20-30-54 285 0.458 0.313 38 12-18-28 280 0.326 0.272 44 25-37-60 430 0.481 0.353 43 18-24-34 310 0.300 0.265 43 17-20-29 510 0.425 0.331 45 21-26-37 610 0.342 0.292 45 23-29-40

ML-39-SP - 1-INCH SLOT SPACING WIDTH - FOUR-SLOT - SUPPLY WITH MP-39-SP PLENUM 2 ft. 6-inch Inlet 4 ft.

PERFORMANCE DATA



12-inch 4 ft. Inlet

F46


50 0.016 0.012 1-2-7 90 0.042 0.028 1-2-8 60 0.023 0.021 1-2-9 90 0.019 0.013 1-2-8 70 0.011 0.009 1-3-13 90 0.011 0.008 1-2-8 120 0.010 0.008 1-3-13

85 0.047 0.034 20 2-5-19 130 0.089 0.058 19 2-4-14 95 0.059 0.053 19 3-6-22 150 0.052 0.036 19 2-5-16 115 0.030 0.025 20 4-9-26 155 0.033 0.025 17 2-6-17 205 0.030 0.024 19 4-10-22

120 0.094 0.068 28 4-9-27 170 0.151 0.100 26 3-7-18 130 0.110 0.099 26 5-11-30 210 0.102 0.072 27 5-10-23 160 0.058 0.049 28 7-17-37 220 0.067 0.050 25 5-11-24 290 0.059 0.048 28 9-16-28

155 0.157 0.114 34 7-16-35 210 0.231 0.152 31 5-10-23 165 0.178 0.159 32 8-18-38 270 0.168 0.118 33 8-15-27 205 0.095 0.080 34 12-23-47 285 0.113 0.083 31 8-15-28 375 0.099 0.080 34 13-20-32

190 0.236 0.171 39 11-22-43 250 0.328 0.216 35 6-13-26 200 0.261 0.233 36 12-23-46 330 0.252 0.177 37 11-18-30 250 0.141 0.119 39 18-29-56 350 0.170 0.126 36 13-19-31 460 0.149 0.121 39 17-25-35


225 0.330 0.240 43 15-26-51 290 0.441 0.290 38 9-16-28 235 0.360 0.322 40 16-27-54 390 0.351 0.247 41 14-21-32 295 0.197 0.165 43 22-34-61 415 0.239 0.177 40 15-22-33 545 0.209 0.169 43 20-27-38

260 0.441 0.320 46 20-30-57 330 0.571 0.376 41 11-18-30 270 0.476 0.425 43 21-31-59 450 0.468 0.328 45 16-24-35 340 0.261 0.219 46 26-39-66 480 0.320 0.237 44 17-25-36 630 0.280 0.226 46 23-29-41

Diffs

PERFORMANCE DATA

Available Models: MP-37 MP-38 MP-39 MPI-37 MPI-38 MPI-39 • Data is valid only for Titus ML linear diffs with Titus supplied MP plenums. • Data was obtained from testing in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance with flexible duct inlet may vary in the field. See the Engineering Guidelines section for additional information.

SPECIAL PERFORMANCE Available Models: MP-37-SP MPI-37-SP MP-38-SP MPI-38-SP MP-39-SP MPI-39-SP • Data is valid only for Titus ML linear diffs with Titus supplied MP-SP plenums. • Pressures are in inches WG. • Data was obtained from testing in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance with flexible duct inlet, may vary in the field. See the Engineering Guidelines section for additional information.

• NC values were determined from octave band 2 thru 7 sound power levels with a 10 dB room absorption. • Pressures are in inches WG. • Throw values are listed for terminal velocities of 150, 100 and 50 fpm under isothermal conditions. For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog. • Throw values listed are for the one-way air pattern. For divided airflow, select the airflow in each direction according to the number of sides aimed in that direction, with the total airflow apportioned between slots.

• NC values were determined from octave band 2 thru 7 sound power levels with a 10 dB room absorption. • Spread can be determined by multiplying the throw by 0.5.


MODULINEAR DIFF PLENUMS

F

• Throw values are listed for terminal velocities of 150, 100 and 50 fpm under isothermal conditions. For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog. • Throw values listed are for the one-way air pattern. For divided airflow, select the airflow in each direction according to the number of sides aimed in that direction, with the total airflow apportioned between slots.


Diffs



F

LINEAR SLOT CEILING DIFFS MODULINEAR DIFF PLENUM ADAPTERS FOR MODEL ML Available Models: MP-37 MPI-37 MP-38 MPI-38 MP-39 MPI-39

• ½” Slot • ½” Slot • ¾” Slot • ¾” Slot • 1” Slot • 1” Slot

Model MP-SP shall have internal baffles to maximize air diffusion by shortening the throw and widening the spread of the discharged air. These diff plenums shall be available in the same sizes and mounting types as MP models.

• Insulated • Insulated • Insulated

Special Performance Models: MP-37-SP • ½” Slot MPI-37-SP • ½” Slot MP-38-SP • ¾” Slot MPI-38-SP • ¾” Slot MP-39-SP • 1” Slot MPI-39-SP • 1” Slot

factory drawn side inlet (welded-in inlets are not acceptable) to fit 1-, 2- 3-, or 4-slot diffs of the sizes and mounting types shown on the plans and outlet schedule. Standard nominal lengths shall be 2, 3, 4, 5 or 6 feet.

Optional internal insulation and field mounted inlet dampers shall be available for both designs (models MPI or MPI-__SP). Plenums shall be provided by the manufacturer of the linear slot diffs. Plenum material shall be galvanized steel.

• Insulated • Insulated • Insulated

Modulinear diff plenums shall be Titus Model MP-__ (standard performance) or MP-__-SP (enhanced spread performance). Plenums must be designed specifically for field attachment of Titus ML or MLR Modulinear diffs with ½-, ¾- or 1-inch slot widths. Plenums shall include a

The manufacturer shall provide performance data with the linear slot diff and plenum tested as one assembly. The linear slot diff and plenum assembly shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

MODEL NUMBER SPECIFICATION Low Profile 8” Plenum Height Model - Modulinear Plenum ½" Slot MP-37 ¾" Slot MP-38 1" Slot MP-39 1½" Slot MP-40 ½" Slot MPI-37 ¾" Slot MPI-38 1" Slot MPI-39

SPECIFICATIONS

XXX-XX-XX

1LP 2LP 3LP 4LP 5LP 6LP 7LP 8LP

Inlet Size (note) 6" Oval 6 8" Oval 8 10" Oval 10 12" Oval 12 X

MP-37-SP ½" Slot MP-38-SP ¾" Slot 2 MP-39-SP 1" Slot 3 MP-40-SP 1½ Slot 4 MPI-37-SP ½" Slot 5 ¾" Slot MPI-38-SP 6 MPI-39-SP 1" Slot Model - Special Performance (optional)

XX Length 2' 3' 4' 5' 6'

XX Border 1A, 1B, Type 2A, 2B, Refer to pages F15-F17 for Details

3, 4, 6, 7A, 7B, 9A, 9B, 11, 12, 15 22

Note: 12-inch oval inlet is available only on high profile plenums. MP/MPI-40, MP-SP/MPI-SP-40 only available in 1-4 slots

F48

1-Slot 2-Slot 3-Slot 4-Slot 5-Slot 6-Slot 7-Slot 8-Slot

XXX 1HP 2HP 3HP 4HP 5LP 6LP 7LP 8LP

Optional Damper Inlet ID Damper

XX 1-Slot 2-Slot 3-Slot 4-Slot 5-Slot 6-Slot 7-Slot 8-Slot

High Profile 11” Plenum Height

Diffs

FIXED BARS - ALUMINUM

• 1/8” Bars • 0° Deflection • 1/8” Bars • 15° Deflection • ¼” Bars • 0° Deflection • ¼” Bars • 15° Deflection

FIXED BARS - PENCIL PROOF - ALUMINUM Available Models: 7 /16” Spacing CT-PP-0 CT-PP-3

• 7/32” Bars • 0° Deflection • 7/32” Bars • 30° Deflection

Products Include: • Standard Finish - #26 White • Optional Finishes: #01 Aluminum #04 Mill #25 Off White #84 Black Anodized finishes available

• When both appearance and performance are of prime importance in an air distribution system, Titus linear bar diffs are a logical choice. • Designed for both heating and cooling applications, supply as well as return. • Available in eight different core styles plus a wide selection of frames and borders.

• Ideal for continuous length applications. Multiple sections are shipped with required alignment strips or pins for field installation. • Maximum one piece section is 6 feet. Lengths greater than 6 feet are furnished in multiple sections. • Sections can be ed together end-to-end for continuous appearance, using standard alignment strips or alignment wires.

• Can be selected for ceiling, side wall, or sill installations. Heavy duty models (Frames 5, 6 and 15) are designed especially for typical floor installations.

• All deflection bars are fixed and parallel to the long dimension.

• Accessories such as directional blades, dampers, blank-offs, access doors and mitered corners make these diffs even more versatile.

• Optional curving to a 2’ feet (24” minimum radius) on most models, available for architectural enhancement.

CT-580

• 1/8” Bars • 0° Deflection • 1/8” Bars • 15° Deflection

CT-480

Available Models: ¼” Spacing CT-480 CT-481 ½” Spacing CT-580 CT-581 CT-540 CT-541


Linear Bar Diffs CT

F

• Fixed bars and bars are extruded aluminum.

CT F49

Diffs


DIMENSIONS

F

BORDERS & FRAMES - CORE COMBINATIONS Core with Border

Core with Border & Frame

Type 13 border is shown. For other available types, please see F49.

Type 1A frame & border combination is shown. For other available types, please see F50.

Core Only

Core with Heavy Duty Mounting Frame for Floor Applications

Model CT-540 core is shown. For other available models, please see below.

Type 5 heavy duty mounting frame is shown. For other available types, please see F50.

AVAILABLE CORES ½” Spacing

¼” Spacing ⅛” Bars

⅛” Bars

¼” Bars

Model CT-480 - 0° Deflection



¼"

Duct Size minus ¾" ½"

Duct Size minus ¾" ⅛"

⅛"

15/32"

Bar

Bar

Bar




Duct Size minus ¾"

Duct Size minus ¾"

⅛"

Duct Size minus ¾" 7

½"

/32"

½"

¼" 15/32"

15/32"

15/32"

Bar

Bar

DIMENSIONS

7/32"

15/32"

15/32"

⅛"

Duct Size minus ¾" ½"

Bar

See Note Pencil Proof

Model CT-PP-0 - 0° Deflection

Model CT-PP-3 - 30° Deflection

Duct Size minus ¾" 7/16"

Duct Size minus ¾" 7

7/32"

/32"

7/16"

15/32"

15/32" Bar

Bar

See Note

F50

Note: Not recommended for floor applications with heavy loads or high traffic. See page F51 for maximum floor loading. All dimensions are in inches.

Diffs

DIMENSIONS

O = D plus 2" 1"

Frame & Border Type 1B with • 1¼” Border

Frame & Border Type 2 with • ¾” Border

O = D plus 2½" 1¼" D minus ¾"

D minus ¾"

3

O = D plus 1¼" D minus ¾" ¾"

/16"

⅜"

⅜" 1⅝"

19/16"

1"

1⅛"

D = Duct Size

Frame & Border Type 3 with • ½” Border • Spring Latch

O = D plus 7/16" D minus ¾" ½"

Frame & Border Type 4 with • ¼” Border • Spring Latch ¾"

7/16"

Border Type 22 Tape & Spackle A

O=D ¼"

D = Duct Size

⅝"

D = Duct Size

1¼"

1 5/8

Duct - 3/4

D minus ¾"

¾"

9

1 /16"

2 5/8

9

1 /16"

A = 5/8"

D = Duct Size

3/16"


Frame & Border Type 1A with • 1” Border

F

D = Duct Size

D = Duct Size

BORDER TYPES Border Type 7 with • ¼” Border O = D minus ¼" ¼"

Border Type 11 & 12 • (11) ½” Border • (12) ¾” Border

D minus ¾"

3

O = 2B plus D minus ¾"

O = 2B plus D minus ¾"

/16"

B

3/16"

1¼"

Border Type 13 & 14 with • (13) 1” Border • (14) 1¼” Border 3/16"

D minus ¾"

1¼"

B

D minus ¾"

1¼"

D = Duct Size

D = Duct Size

D = Duct Size

HEAVY DUTY MOUNTING FRAMES FOR FLOOR APPLICATIONS (see loading limitations Submittal D-CT-HD)

O = D plus 1⅝" 1" D minus ⅜"

⅛"

1⅞"

Frame Type 6 • No Flange

13/16"

3/16"

1⅞"

Frame Type 15 • Carpet Clamp Flange O=D D minus ⅜"

O = D plus ¼"

⅜" to 11/16" ½"

3/16"

D minus ¾"

15/16" 2"

Minimum Duct Width is 3"

DIMENSIONS

Frame Type 5 • 1” Flange

1½"

11

11

/32" D = Duct Size

/32" D = Duct Size

1"

D = Duct Size

Note: Not available for CT-480/481

F51

Diffs


DIMENSIONS Border Types (Type 11 Shown)

Core C

C F D

F D O

Type 5 6 7 11 12 13 14 22

F

O

Border Length Overall Length D D D D D D

D D minus minus minus minus minus minus

D plus 1⅝ D D minus ¼ D plus ¼ D plus ¾ D plus 1¼ D plus 1¾ D plus 21/2

⅝ ⅝ ⅝ ⅝ ⅝ ⅝

O

C Core Opening Length D minus ⅜ D minus ⅜ D minus ¾ D minus ¾ D minus ¾ D minus ¾ D minus ¾ D minus ¾

2” 2 ½” 3” 3 ½” 4” 5” 6”

Border 1A, 1B, 2, 3, 4, 7, 11, 12, 13, 14 CT480, 481 ¼” spacing 3 5 7 9 11 15 19

F

O

Type

Frame Length

Overall Length

1A 1B 2 3 4 15

D D D D D D

D plus 2 D plus 2 ½ D plus 1 ¼ D plus 7/16 D D plus ¼

C Core Opening Length D minus ¾ D minus ¾ D minus ¾ D minus ¾ D minus ¾ D minus ¾

MAXIMUM FLOOR LOADING

STANDARD CORE WIDTH INFORMATION Number of Bars per Width

F

Frame & Border Type (Type 1A & 1B Shown)

Core

(Frames 5, 6, and 15 with standard bars on 6” centers)

Border 5, 6, 15

CT540, 541, CT580, 581 ½” spacing

CTPPO, CTPP3 7 /16” spacing

CT480, 481 ¼” spacing

CT540, 541, CT580, 581 ½” spacing

CTPPO, CTPP3 7 /16” spacing

2 3 4 5 6 8 10

2 3 4 5 7 9 11

6 8 10 12 14 18 22

3 4 4 6 7 9 11

3 4 5 7 8 10 12

Max. Vertical Distributed Load (lbs./in.2) 300 200 250 250

Model CT-480/CT-481 CT-580/CT-581 CT-540/CT-541 CT-PP-0/CT-PP-3

Max. Vertical Live Load (lbs./ft.2) 300 200 250 250

Max. Horizontal Load (lbs.) 50 50 50 50

Note: If placing furniture on cores, furniture legs should be a minimum of core spacing plus two bars wide to avoid placing a horizontal load on cores. Maximum duct width available is 12”.

CORE ONLY OPTION

ALIGNMENT STRIPS 5 17

/8"

/32"

S D

S = 9” maximum bar spacing. D = 72” maximum for one piece. Core Only is an option available for field framing. Standard widths are as shown. See page F49 for core details. Core will ship ¾” smaller than the duct width.

Used with border width ½” or wider. Alignment pins used with ¼” borders.

DIMENSIONS

AVAILABLE FASTENINGS Type A • Screw Holes

Type B • Spring Clip

For ceiling, side wall, sill, or floor. Used with Frame & Border Types 1B, 5, 11, 12, 13, 14.

For sill installations. Used with Frame & Border Types 11, 12, 13, 14. Must use AG-35B Damper instead of AG-35.

ADDITIONAL REINFORCING (Optional)

Duct

Type CC-Core Clip Option For ceiling, side wall, or sill. Used with Frame and Border Types 1A, 1B, 2, 3, 4, 7, 11, 12, 13, 14, & Border Type 22.

(Except frame types 5, 6, and 15) Type H - Optional Heavy Duty Core (Note)

6" Max.

6" Max.

Optional Heavy Duty Core has bars on 6” maximum centers. (Standard core has 9” maximum centers.) See maximum floor loading shown above.

F52

Type C • Concealed Fastening

Note: Frame types 5, 6 and 15 have bars on 6-inch centers as standard.

CORE CLIP

CC - CORE CLIP OPTION AVAILABLE ON FRAME 5 & 6 ONLY

CORE CLIP FACE


Notes: • Used without spring latch in Frame & Border Types 3 and 4. • Not for use with Cores CT-480 and CT-481 (¼” bar spacing). Screwdriver will not fit between bars.

Diffs

ACCESSORIES Model 07 Directional Blades

Model AG-35 Opposed Blade Damper

1¼"

*3"

27/16" For Model CT diff widths 2” through 4”. Friction hinge on 2” widths. Screwdriver operator on 2½” through 4”. Cannot be attached to Frame and Border Types 3, 4, 5, 6, or 15. For those types use Model AG-35B damper on diffs 3” and wider.

For all widths of Model CT diffs 3” or greater. Cannot be attached to Frame and Border Types 3 and 4. Can be used with Type 5, 6, or 15 if Type B Spring Clip Fastening is omitted.

Model BLKS Steel Blank-Off

Model AD Access Door (Not available on Types 3, 4, 5, 6, 15, and 22; and not available when damper is required.)

For Model CT diffs 3” and wider. Not recommended for Models CT-480 and CT-481. Cannot be attached to Frame and Border Types 3 and 4. Use Model AG-35B damper for those types. Note: Minimum duct width is 3”. *For floor models, dimension is 4”

Note: Maximum Length is 6 feet.

11/16"

F

6"

BLKS

For all widths of Model CT diffs. Furnished in 6’ lengths for field cutting and installation. Steel, painted flat black.

L2

L1

L3

X

MITERED CORNERS

R3

R1

R2

X

Specify Dimension X

Available Pencil Proof Models: MC-PP-0 • 7/16” Spacing • 7/32” Bars • 0° Deflection MC-PP-3 • 7/16” Spacing • 7/32” Bars • 30° Deflection

Available Models: MC-480 • ¼” Spacing • 1/8” Bars • 0° Deflection MC-481 • ¼” Spacing • 1/8” Bars • 15° Deflection MC-580 • ½” Spacing • 1/8 ” Bars • 0° Deflection MC-581 • ½” Spacing • 1/8” Bars • 15° Deflection MC-540 • ½” Spacing • ¼” Bars • 0° Deflection MC-541 • ½” Spacing • ¼” Bars • 15° Deflection O D

D'

Outside D'

D'

D O

D=O

Inside

D=O

Type C • Side Wall, Inside

D=O

D=O

Type D • Side Wall, Outside

ACCESSORIES

Floor, Ceiling, or Sill Type O • 0° Deflection Type A • Deflection Inside Type B • Deflection Outside


Model AG-30 Single Blade Damper

OVERALL DIMENSION O FOR VARIOUS FRAME AND BORDER TYPES Duct Duct Width D’ Length D 1A 1B 2 3 2-4 12 12 15/16 13 3/16 12 5/8 12 3/16 4½-10 18 18 15/16 19 3/16 18 5/8 18 3/16 10½-12 24 24 15/16 24 3/16 24 5/8 24 3/16

4 12 18 24

Frame & Border Type 5 6 7 11 12 13 14 15 12 13/16 12 11 7/8 12 1/8 12 3/8 12 5/8 12 7/8 12 1/8 18 13/16 18 17 7/8 18 1/8 18 3/8 18 5/8 18 7/8 18 1/8 13 24 /16 24 23 7/8 24 1/8 24 3/8 24 5/8 24 7/8 24 1/8


CO 12 18 24

F53

Diffs


INSTALLATIONS A1 Side Wall

A2 Side Wall

A3 Side Wall Finished Plaster

Finished Wood ing

Duct by Others

Duct by Others

Duct by Others

Border Type 11, 12, 13 or 14

Frame & Border Type 3 with Concealed Fastening

Frame & Border Type 4 with Concealed Fastening

B1 Raised Sill

B2 Raised Sill

B3 Raised Sill

Not for Floor Installations



Marble Sill or Curb

Finished Sill Marble, Terrazzo, Concrete, Vinyl Tile, Etc.

F

Core by Others

Duct by Others


Frame & Border Type 3

Core Only

C1 Floor or Sill

C2 Floor or Sill

C3 Floor or Sill Carpet

Finished Floor, Sill, or Curb

See Submittal CT-HD for maximum loading.


Duct by Others

INSTALLATIONS

Metal Enclosure by Others

Angle by Others

Duct by Others

Finished Floor, Sill, or Curb


Duct by Others

Duct by Others

Frame Type 6 plus Heavy Duty Core



D1 Ceiling

D2 Ceiling

D3 Ceiling

Duct by Others

Duct by Others Duct by Others

Plaster Stop by Others

Finished Plaster Ceiling


F54

Finished Plaster


Frame and Border Type 3 with Concealed Fastening

Acoustical Tile or Acoustical Metal Pan Ceiling

Frame and Border Type 2

Diffs

PERFORMANCE DATA Effective Area, Square Feet

Nominal Duct Width, Inches

0.048

2

0.066

2½

0.084

3

0.103

3½

0.121

4

0.157

5

0.194

6

Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall

0.011 19 3-5-10 0.011 26 3-6-12 0.01 33 3-7-13 0.011 41 4-8-15 0.011 49 4-8-17 0.011 63 5-9-19 0.011 78 6-10-21

0.024 28 5-8-15 0.024 39 6-9-18 0.024 50 7-10-20 0.024 61 8-11-22 0.024 73 8-12-25 0.024 94 9-14-28 0.024 116 10-16-31

0.042 37 7-10-18 0.043 52 8-12-21 0.041 66 9-13-23 0.043 82 11 10-15-26 0.044 98 12 11-17-28 0.042 125 12 12-19-32 0.042 155 13 14-21-36

0.068 47 14 8-13-20 0.066 65 15 10-15-23 0.066 83 16 11-17-26 0.066 102 17 13-19-29 0.068 122 18 14-21-32 0.066 157 19 16-23-36 0.066 194 20 17-26-40

0.097 56 19 10-15/-22 0.096 78 20 12-18-25 0.095 100 21 14-20-29 0.095 122 22 15-22-32 0.097 146 23 17-25-35 0.094 188 24 19-28-39 0.095 233 25 21-31-44

0.134 66 24 12-17-23 0.13 91 25 14-19-27 0.128 116 26 16-22-31 0.13 143 27 18-24-34 0.133 171 28 19-27-38 0.129 220 29 22-30-43 0.129 272 30 24-34-47

0.173 75 27 14-18-25 0.17 104 29 16-21-29 0.168 133 30 18-23-33 0.169 163 30 20-26-37 0.173 195 32 22-28-40 0.168 251 32 25-32-46 0.168 310 33 28-36-51

0.217 84 31 15-19-26 0.215 117 32 18-22-31 0.211 149 33 20-25-35 0.216 184 34 23-28-39 0.221 220 35 25-30-43 0.212 282 36 28-34-48 0.213 349 37 31-38-54

0.272 94 34 16-20-28 0.266 130 35 19-23-33 0.262 166 36 21-26-37 0.265 204 37 24-29-41 0.271 244 38 26-32-45 0.263 314 39 29-36-51 0.263 388 40 33-40-57

0.133 66 31 12-17-23 0.129 91 31 14-19-27 0.127 116 32 16-22-31 0.129 143 33 18-24-34 0.132 171 34 20-27-38 0.128 220 35 22-30-43 0.128 272 36 25-34-47

0.172 75 34 13-18-25 0.169 104 35 16-21-29 0.167 133 36 18-23-33 0.168 163 37 20-26-37 0.172 195 38 22-28-40 0.167 251 39 25-32-46 0.167 310 39 28-36-51

0.216 84 38 15-19-26 0.214 117 39 18-22-31 0.21 149 39 20-25-35 0.214 184 40 23-28-39 0.219 220 41 25-30-43 0.211 282 42 28-34-48 0.211 349 43 31-38-54

0.271 94 41 16-20-28 0.264 130 42 19-23-33 0.26 166 42 21-26-37 0.263 204 43 24-29-41 0.27 244 44 26-32-45 0.261 314 45 29-36-51 0.261 388 46 33-40-57


CT-480 - 1/8-INCH THICK BARS - 0° DEFLECTION - ¼-INCH SPACING WIDTH

F

CT-481 - ⅛-INCH THICK BARS - 15° DEFLECTION - ¼-INCH SPACING WIDTH Nominal Duct Width, Inches

0.049

2

0.066

2½

0.083

3

0.100

3½

0.117

4

0.151

5

0.186

6


0.011 19 3-5-10 0.011 26 3-6-12 0.01 33 4-7-14 0.011 41 4-8-15 0.011 49 5-8-17 0.011 63 5-10-19 0.011 78 6-11-21

0.024 28 5-7-15 0.024 39 6-9-18 0.024 50 7-10-20 0.024 61 8-11-22 0.024 73 8-13-25 0.023 94 10-14-28 0.023 116 11 11-16-31

0.042 37 14 7-10-18 0.042 52 16 8-12-21 0.041 66 16 9-14-23 0.043 82 17 10-15-26 0.044 98 18 11-17-28 0.041 125 19 13-19-32 0.042 155 20 14-21-36

0.068 47 21 8-13-20 0.066 65 22 10-15-23 0.065 83 23 11-17-26 0.066 102 24 13-19-29 0.067 122 25 14-21-32 0.065 157 25 16-24-36 0.065 194 26 18-27-40

0.096 56 26 10-15-22 0.095 78 27 12-18-25 0.095 100 28 14-20-29 0.094 122 29 15-22-32 0.097 146 30 17-25-35 0.094 188 30 19-28-39 0.094 233 31 21-31-44


PERFORMANCE DATA

Effective Area, Square Feet

F55

Diffs


PERFORMANCE DATA

F

CT-580 - ⅛-INCH THICK BARS - 0° DEFLECTION - ½-INCH SPACING WIDTH Effective Area, Square Feet


0.055

2

0.076

2½

0.096

3

0.117

3½

0.138

4

0.179

5

0.221

6


0.009 22 3-6-11 0.009 30 3-6-3 0.009 38 4-7-14 0.008 46 4-8-16 0.009 56 5-9-18 0.009 72 5-10-20 0.008 88 6-11-22

0.021 33 6-8-17 0.019 44 6-9-19 0.02 58 7-11-22 0.019 69 8-12-4 0.02 83 9-13-26 0.019 107 10-15-30 0.019 133 11-17-33

0.037 44 7-11-19 0.033 58 8-12-22 0.036 78 10-15-25 0.034 92 11-16-28 0.035 110 12-18-30 0.034 142 13-20-34 0.035 178 11 15-22-38

0.058 55 12 9-14-21 0.051 72 12 10-15-24 0.057 98 14 12-19-28 0.053 115 14 13-20-31 0.054 137 15 15-22-34 0.052 177 16 16-25-38 0.054 223 17 19-28-43

0.084 66 17 11-17-23 0.073 86 17 12-18-27 0.083 118 19 15-22-31 0.076 138 19 16-24-34 0.077 164 20 17-26-37 0.075 212 21 20-30-42 0.079 268 22 22-33-47

0.114 77 21 13-18-25 0.098 100 21 14-20-29 0.113 138 24 18-24-34 0.103 161 23 19-26-37 0.104 191 24 20-28-40 0.102 247 25 23-32-45 0.107 313 27 26-36-51

0.149 88 25 15-19-27 0.128 114 24 16-22-31 0.149 158 27 20-26-36 0.135 184 27 21-28-39 0.136 218 28 23-30-42 0.133 282 29 26-34-48 0.14 358 30 30-39-54

0.189 99 28 17-20-29 0.161 128 28 18-23-33 0.189 178 31 22-27-38 0.171 207 30 24-29-41 0.171 245 31 26-32-45 0.168 317 32 30-36-51 0.178 403 34 33-41-58

0.234 110 31 17-21-30 0.199 142 30 20-24-34 0.234 198 34 23-29-40 0.211 230 33 25-31-44 0.211 272 34 27-34-47 0.207 352 35 31-38-54 0.22 448 37 35-43-61

0.114 77 29 13-18-25 0.108 105 30 15-21-29 0.105 133 30 17-23-33 0.102 160 31 19-26-36 0.101 188 31 20-28-39 0.099 244 32 23-32-45 0.095 295 33 25-35-49

0.149 88 33 15-19-27 0.142 120 34 17-22-32 0.137 152 34 19-25-35 0.133 183 35 21-28-39 0.132 215 35 23-30-42 0.13 279 36 26-34-48 0.124 337 37 29-37-53

0.189 99 36 17-20-29 0.179 135 37 19-24-33 0.174 171 38 22-27-38 0.169 206 38 24-29-41 0.167 242 39 26-32-45 0.164 314 40 29-36-51 0.157 379 40 32-40-56

0.233 110 40 17-21-30 0.221 150 40 20-25-35 0.215 190 41 23-28-40 0.209 229 41 25-31-44 0.206 269 42 27-33-47 0.203 349 43 31-38-54 0.194 421 43 34-42-59

PERFORMANCE DATA

CT-581 - ⅛-INCH THICK BARS - 15° DEFLECTION - ½-INCH SPACING WIDTH

F56



0.055

2

0.075

2½

0.096

3

0.116

3½

0.136

4

0.176

5

0.216

6


0.009 22 3-6-11 0.009 30 3-6-13 0.009 38 4-7-15 0.008 45 4-8-16 0.008 53 4-9-17 0.008 69 5-10-19 0.008 85 6-11-22

0.021 33 6-8-17 0.02 45 6-10-19 0.019 57 7-11-22 0.018 68 8-12-4 0.018 80 9-13-26 0.018 104 10-15-29 0.018 127 11-16-32

0.037 44 12 7-11-19 0.035 60 13 9-13-22 0.034 76 14 10-15-25 0.033 91 14 11-16-27 0.033 107 14 11-17-30 0.032 139 15 13-20-34 0.031 169 16 14-22-37

0.058 55 19 9-14-21 0.055 75 20 11-16-25 0.054 95 20 12-18-28 0.052 114 21 13-20-31 0.051 134 21 14-22-33 0.05 174 22 16-25-38 0.049 211 23 18-27-42

0.084 66 24 11-17-23 0.08 90 25 13-19-27 0.077 114 26 15-22-31 0.075 137 26 16-24-34 0.074 161 27 17-26-37 0.073 209 28 20-29-42 0.07 253 28 21-32-46


Diffs

PERFORMANCE DATA Effective Area, Square Feet


0.053

2

0.075

2½

0.097

3

0.119

3½

0.141

4

0.185

5

0.228

6


0.009 19 2-5-10 0.009 26 3-6-11 0.009 33 3-6-13 0.009 41 3-7-14 0.009 49 4-8-15 0.009 63 4-9-17 0.009 78 4-10-19

0.02 0.036 0.058 0.082 28 37 47 56 14 19 5-7-14 6-10-18 8-12-20 10-14-22 0.02 0.036 0.056 0.081 39 52 65 78 15 21 6-8-17 7-11-21 9-14-23 11-17-25 0.02 0.035 0.055 0.08 50 66 83 100 16 22 6-10-19 8-13-23 11-16-26 13-19-29 0.02 0.036 0.056 0.08 61 82 102 122 11 18 23 7-10-21 9-14-26 12-18-29 14-21-32 0.021 0.037 0.057 0.082 73 98 122 146 12 19 24 8-12-23 10-15-28 13-19-32 15-23-35 0.02 0.035 0.056 0.08 94 125 157 188 13 19 25 9-13-26 11-17-32 14-22-36 17-26-39 0.02 0.035 0.056 0.08 116 155 194 233 14 20 26 10-14-29 13-19-36 16-24-40 19-29-44

0.113 66 24 11-17-23 0.11 91 25 13-19-27 0.108 116 26 15-22-31 0.11 143 27 16-24-34 0.113 171 28 18-27-38 0.109 220 29 20-30-43 0.109 272 30 22-34-47

0.146 75 28 13-18-25 0.144 104 29 15-21-29 0.142 133 30 17-23-33 0.143 163 31 19-26-37 0.146 195 32 21-28-40 0.142 251 33 23-32-46 0.142 310 34 26-36-51

0.184 84 31 14-19-26 0.182 117 33 17-22-31 0.178 149 33 19-25-35 0.182 184 35 21-28-39 0.186 220 36 23-30-43 0.179 282 36 26-34-48 0.18 349 37 29-38-54

0.23 94 34 16-20-28 0.224 130 36 19-23-33 0.221 166 37 21-26-37 0.224 204 38 23-29-41 0.229 244 39 26-32-45 0.222 314 39 29-36-51 0.222 388 40 32-40-57

0.136 66 30 12-17-23 0.132 91 31 14-19-27 0.13 116 32 15-22-31 0.132 143 33 17-24-34 0.135 171 34 19-27-38 0.131 220 35 21-30-43 0.131 272 36 24-34-47

0.176 75 33 14-18-25 0.173 104 35 16-21-29 0.171 133 36 18-23-33 0.172 163 37 20-26-37 0.176 195 38 22-28-40 0.171 251 39 24-32-46 0.171 310 40 27-36-51

0.221 84 37 15-19-26 0.219 117 38 18-22-31 0.214 149 39 20-25-35 0.219 184 40 22-28-39 0.224 220 41 24-30-43 0.215 282 42 27-34-48 0.216 349 43 30-38-54

0.277 94 40 16-20-28 0.27 130 41 19-23-33 0.266 166 42 21-26-37 0.269 204 43 24-29-41 0.276 244 44 26-32-45 0.267 314 45 29-36-51 0.267 388 46 33-40-57


CT-540 - ¼-INCH THICK BARS - 0° DEFLECTION - ½-INCH SPACING WIDTH

F

CT-541 - ¼-INCH THICK BARS - 15° DEFLECTION - ½-INCH SPACING WIDTH Nominal Duct Width, Inches

0.048

2

0.068

2½

0.088

3

0.108

3½

0.128

4

0.168

5

0.208

6


0.011 19 3-5-10 0.011 26 3-6-12 0.011 33 3-7-13 0.011 41 4-7-15 0.011 49 4-8-16 0.011 63 4-9-18 0.011 78 5-10-20

0.025 28 5-8-15 0.024 39 6-9-18 0.024 50 7-10-20 0.024 61 7-11-22 0.025 73 8-12-24 0.024 94 9-14-27 0.024 116 10-15-30

0.043 37 12 7-10-18 0.043 52 14 8-12-21 0.042 66 15 9-13-23 0.043 82 16 10-15-26 0.044 98 17 11-16-28 0.042 125 18 12-18-32 0.043 155 19 13-20-36

0.069 47 19 8-13-20 0.067 65 21 10-15-23 0.067 83 22 11-17-26 0.067 102 23 12-18-29 0.069 122 24 13-20-32 0.067 157 25 15-23-36 0.067 194 26 17-25-40

0.098 56 25 10-15-2 0.097 78 26 12-1-25 0.097 100 27 13-20-29 0.096 122 28 15-22-32 0.099 146 29 16-24-35 0.096 188 30 18-27-39 0.096 233 31 20-30-44


PERFORMANCE DATA


F57

Diffs


PERFORMANCE DATA

F

CT-PP-0 - 7/32-INCH THICK BARS - 0° DEFLECTION - 7/16-INCH SPACING WIDTH Effective Area, Square Feet


0.050

2

0.072

2½

0.094

3

0.115

3½

0.137

4

0.180

5

0.224

6


0.013 20 3-5-11 0.013 28 3-6-12 0.015 38 4-7-15 0.015 46 4-8-16 0.014 54 4-9-17 0.015 72 5-10-20 0.011 75 4-9-19

0.03 30 5-8-16 0.03 42 6-9-19 0.034 57 7-11-22 0.033 69 8-12-24 0.032 81 9-13-26 0.033 107 10-15-30 0.028 122 10-15-31

0.053 40 7-11-18 0.053 56 8-12-22 0.06 76 12 10-15-25 0.058 92 12 11-16-28 0.058 108 13 12-17-30 0.058 142 14 13-20-34 0.054 169 14 14-21-37

0.084 50 14 9-13-20 0.084 70 15 10-15-24 0.093 95 18 12-18-8 0.091 115 19 13-20-31 0.09 135 19 14-22-33 0.091 177 20 16-25-38 0.088 216 21 18-27-42

0.12 60 19 11-16-22 0.12 84 20 12-19-26 0.134 114 23 15-22-31 0.132 138 24 16-24-34 0.13 162 24 17-26-37 0.13 212 26 20-30-42 0.131 263 27 22-33-47

0.164 70 23 12-17-24 0.164 98 25 14-20-28 0.182 133 27 17-23-33 0.179 161 28 19-26-37 0.177 189 29 20-28-40 0.176 247 30 23-32-45 0.182 310 31 26-36-51

0.214 80 27 14-18-26 0.214 112 29 16-22-30 0.238 152 31 20-25-35 0.234 184 32 21-28-39 0.231 216 32 23-30-42 0.23 282 34 26-34-48 0.241 357 35 30-38-54

0.271 90 30 16-19-27 0.271 126 32 19-23-32 0.302 171 35 22-27-38 0.296 207 35 24-29-41 0.292 243 36 26-32-45 0.291 317 37 29-36-51 0.309 404 39 33-41-58

0.334 100 33 17-20-29 0.334 140 35 20-24-34 0.372 190 38 23-28-40 0.365 230 38 25-31-44 0.36 270 39 27-33-47 0.358 352 40 31-38-54 0.385 451 42 35-43-61

0.159 69 32 12-17-24 0.141 91 32 14-19-27 0.144 118 33 16-22-31 0.135 140 33 17-24-34 0.15 174 35 20-27-38 0.144 223 36 22-30-43 0.139 271 36 24-34-47

0.209 79 36 14-18-26 0.184 104 36 16-21-29 0.188 135 37 18-24-33 0.177 160 37 20-26-36 0.196 199 39 23-29-41 0.188 255 40 25-32-46 0.182 310 40 28-36-51

0.265 89 39 16-19-27 0.233 117 39 18-22-31 0.238 152 40 20-25-35 0.224 180 40 22-27-39 0.248 224 42 25-30-43 0.238 287 43 28-34-49 0.231 349 43 31-38-54

0.328 99 43 17-20-29 0.288 130 42 19-23-33 0.295 169 43 22-26-37 0.276 200 43 23-29-41 0.307 249 45 26-32-45 0.294 319 46 30-36-51 0.285 388 46 33-40-57

PERFORMANCE DATA

CT-PP-3 - 7/32-INCH THICK BARS - 30° DEFLECTION - 7/16-INCH SPACING WIDTH

F58



0.048

2

0.066

2½

0.084

3

0.102

3½

0.120

4

0.156

5

0.192

6


0.012 19 3-5-10 0.012 26 3-6-12 0.011 33 3-7-13 0.011 40 4-7-15 0.012 49 4-8-17 0.011 63 5-9-19 0.011 76 5-10-21

0.028 29 5-8-15 0.026 39 6-9-18 0.026 50 7-10-20 0.025 60 7-11-22 0.027 74 8-13-25 0.026 95 11 9-14-28 0.025 115 11 10-16-31

0.051 39 16 7-10-18 0.046 52 16 8-12-21 0.046 67 17 9-14-24 0.044 80 17 10-15-26 0.048 99 19 11-17-29 0.047 127 19 13-19-32 0.045 154 20 14-21-36

0.08 49 22 9-13-20 0.072 65 22 10-15-23 0.073 84 23 11-17-26 0.069 100 23 12-19-29 0.076 124 25 14-21-32 0.073 159 26 16-24-36 0.071 193 26 17-26-40

0.116 59 28 11-16-22 0.104 78 27 12-18-25 0.105 101 29 14-20-29 0.099 120 29 15-22-32 0.11 149 31 17-25-35 0.106 191 31 19-28-40 0.102 232 32 21-31-44


Diffs

PERFORMANCE DATA

Throw Correction for Length (multiply) Active Length (ft)

2

Throw Correction 0.72

4

8

10

1

1.5

1.7

Note: Throw values based on applications with surface effect. Use the multiplier of 0.7 for free jet applications. • NC values are based on a room absorption of 10 dB, re 10-12 watts, with a 4-foot active diff section. Corrections for other lengths are shown in the table below.

NC Correction for Length (add) Active Length (ft)

2

4

6

8

10

NC Correction

-3

0

2

3

5

• When the diff is used as a return intake, the NC value is increased by 4, and the negative static pressure is 0.8 times the listed total pressure. • Dash (–) in space denotes an NC value less than 10. • For continuous lengths, the selection for NC is usually based on a 10-foot section. • These products have been tested per ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet and supply plenums, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • Maximum available width 24 inches except frames 5, 6 and 15 (12-inch width). Consult your Titus representative for performance data. • For continuous lengths it is recommended that maximum active lengths are no longer than 10 feet.


• All pressures are in inches of water. • Throw velocities are given for terminal velocities of 150, 100 and 50 fpm. For an explanation of catalog throw data, see the Engineering Guidelines section. • Throw values are based on an active section 4 feet long. Multipliers for correcting the throw for other lengths are shown in the table below.

F


Diffs



F

available in standard one-piece lengths up to 6 feet and shall have the sizes and mounting types shown on the plans and outlet schedule. Diff lengths greater than 6 feet shall be furnished in multiple sections and will be ed together end-to-end with alignment strips or pins to form a continuous appearance. All alignment components to be provided by the manufacturer.

LINEAR BAR DIFFS ALUMINUM FIXED BARS Available Models: CT-480 CT-481 CT-580 CT-581 CT-540 CT-541

• ¼” Spacing • 1/8” Bars • 0° Deflection • ¼” Spacing • 1/8” Bars • 15° Deflection • ½” Spacing • 1/8” Bars • 0° Deflection • ½” Spacing • 1/8” Bars • 15° Deflection • ½” Spacing • ¼” Bars • 0° Deflection • ½” Spacing • ¼” Bars • 15° Deflection

The diff core shall have extruded aluminum bars locked into a heavy extruded aluminum border. The deflection bars must be fixed and parallel to the long dimension. The core must have bars located no more than 9 inches apart and shall be parallel to the short dimension. Floor models of the diff shall have heavy duty mounting frames (frames 5, 6 or 15) and removable cores for easy access. The core bars shall be located no more than 6 inches apart and shall be parallel to the short dimension for added strength. The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering, or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied.

ALUMINUM FIXED BARS PENCIL PROOF Available Models: CT-PP-0 CT-PP-3

• 7/16” Spacing • 7/32” Bars • 0° Deflection • 7/16” Spacing • 7/32” Bars • 30° Deflection

Linear bar diffs shall be Titus model CT with ⅛- or ¼-inch thick fixed bars at 0° or 15° deflection, spaced ¼or ½-inch on center. Model CT-PP shall also be available with 7/32-inch thick fixed bars at 0° or 30° deflection, spaced 7/16-inch on center. Linear bar diffs shall be

Heavy gauge extruded aluminum end borders and mitered corners shall be available to close off the ends of the diffs. Optional opposed blade damper shall be constructed of heavy gauge steel (aluminum also available). Damper must be operable from the face of the diff. Optional directional blades and blank-offs shall also be available. Optional diff curving to a 6-foot minimum radius on most models shall be available as required. The manufacturer shall provide published performance data for the linear bar diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

SPECIFICATIONS

MODEL NUMBER SPECIFICATIONS Model 480 481 580 581 540 541 PP-0 PP-3 CT-

¼” spacing • ⅛” Bars • ¼” spacing • ⅛” Bars • ½” spacing • ⅛” Bars • ½” spacing • ⅛” Bars • ½” spacing • ¼” Bars • ½” spacing • ¼” Bars • 7 /16” spacing • 7/32” Bars 7 /16” spacing • 7/32” Bars

XXX Frame & Border Type Refer to pages F49-F51 for details

0° deflection 15° deflection 0° deflection 15° deflection 0° deflection 15° deflection • 0° deflection • 30° deflection

XX

XX

1A 1B 2

26 34 01

Fastening Screw Holes A C Concealed N X

Finish White Clear Anodized Aluminum

Note: Concealed fastening not available with CT-480 and CT-481.

F60

(note) None

XX-XX

Accessories H Heavy Duty 07

Core Directional Blades

XX

Optional Damper AG-30 Single Blade AG-35 Opposed Blade

Diffs


CT-


XXX

XX

Frame & Border Type


Fastening Concealed (note) C None N

XX 26 34 01

X

Model 480 481 580 581 540 541 PP-0 PP-3 CT-


Finish

XXX

XX

XX

Fastening A Screw Holes

N X

XXX

XX

XX

5 6

26 34 01

Frame & Border Type (note 2) Refer to pages F49-F51 for details

Core Directional Blades

F

XX

Optional Damper AG-30 Single Blade AG-35 Opposed Blade

Fastening A Screw Holes B N X


Note 1: Fastening Type A and B are not available with Border Type 6. Note 2: Frames 5, 6, & 15 are the only floor frames available.

(note 1) Spring Clip (note 1) None

XX-XX Optional Damper AG-35 Opposed

SPECIFICATIONS

CT-


07

XX-XX

Finish White 7 26 Clear Anodized Refer to pages 11 34 F49-F51 for details Aluminum 12 01 13 14 Note 1: Fastening Type A is not available with Border Type 7. Note 2: Concealed fastening not available with CT-480 and CT-481.


Accessories H Heavy Duty

(note 1) Spring Clip Concealed (note 2) None

B C

Frame & Border Type

Model 480 481 580 581 540 541 PP-0 PP-3

X

Optional Damper AG-35B Opposed Blade

White Clear Anodized Aluminum


Core

XX-XXX

3 4 22 Note: Concealed fastening not available with CT-480 and CT-481. Refer to pages F49-F51 for details

Accessories H Heavy Duty


Model 480 481 580 581 540 541 PP-0 PP-3

Blade

F61

Diffs



CT-

Model 580 581 540 541 PP-0 PP-3

½” spacing • ⅛” Bars • ½” spacing • ⅛” Bars • ½” spacing • ¼” Bars • ½” spacing • ¼” Bars • 7 /16” spacing • 7/32” Bars 7 /16” spacing • 7/32” Bars

XXX

15

26 34 01

Refer to pages F49-F51 for details

None

N

XX-XXX


Optional Damper AG-35B Opposed Blade

Note: Available floor frames are Frames 5, 6, and 15 only.

Model 480 481 580 581 540 541 PP-0 PP-3 CT-

XXX


CO Border Type Core Only

SPECIFICATIONS

Fastening

XX

Frame & Border Type (note)

F

F62

0° deflection 15° deflection 0° deflection 15° deflection • 0° deflection • 30° deflection


Fastening None

XX 26 34 01

N

X


Accessories H

Heavy Duty Core

Diffs

Linear Louver Diffs ARCHITECTURAL - ADJUSTABLE - ALUMINUM

Products Include: • Standard Finish - #26 White. • Optional Finishes: #01 Aluminum. #04 Mill. #25 Off White. #84 Black. Anodized finishes available.

• Titus architectural linear louver diffs combine crisply sculptured styling, careful workmanship, and effective air distribution. • Designed for both heating and cooling applications, supply as well as return. • Excellent performance in variable air volume systems. Ceiling mounted diffs maintain a uniform, horizontal discharge pattern over widely varying flow rates. • Available in both one-way and two-way discharge patterns.

LL-2

• One-Way Pattern • Fixed Louvers • Two-Way Pattern • Fixed Louvers

LL-1

Available Models: LL-1 LL-2

• Choice of four different frame types, all with removable cores. • Accessories such as directional blades, dampers, blank-offs, and mitered corners make these diffs even more versatile. • Ideal for continuous length applications. Multiple sections are shipped with required alignment strips or pins for field installation. • Maximum one piece section is 6 feet. Lengths greater than 6 feet are furnished in multiple sections.


LL-1, LL-2

F

• Material is extruded aluminum.

CHOICE OF FLOW PATTERN LL-1 - One-Way Pattern

LL-2 - Two-Way Pattern

AVAILABLE WIDTHS LL-1 - One-Way Pattern

LL-2 - Two-Way Pattern D'

C

C

Nominal Duct Width

3½, 4¼, 5, 5¾, 6½, 8, 9½, 11¾

Nominal Duct Width

6¼, 7¾, 9¼, 10¾, 12¼

Actual Duct Width D’

3⅝, 4⅜, 5⅛, 5⅞, 6⅝, 8⅛, 9⅝, 11⅞

Actual Duct Width D’

6⅜, 7⅞, 9⅜, 10⅞, 12⅜

Face Width C

3⅜, 4⅛, 4⅞, 5⅝, 6⅜, 7⅞, 9⅜, 11⅝

Face Width C

6⅛, 7⅝, 9⅛, 10⅝, 12⅛


LL-1, LL-2

D'

F63

Diffs


DIMENSIONS

F

Frame Types 1A & 1B • Surface Flange, Duct Mount

Frame Type 2 • No Flange, Duct Mount

Frame Type 3 • Plaster Frame

DUCT SIZE D'

Duct Size D'

1¼"

Duct Size D'

1 58"

1 1 4" 30°

⅛"

A

C = D' minus ¼" 1/16"

Type

A

1A 1B

½ 1

¾"

C = D' MINUS 1/4"

C = D' minus ¼"

END FABRICATION X-X End Borders

Y-Y End Borders

X

X LL-1 or LL-2

D O Frame 1A 1B

X-Y End Borders XY

Y

Y

X

Y LL-2

LL-1 or LL-2

D O

D O D+¾ D + 1¾ O D-⅛ D + 1¼

DIMENSIONS

Frame 2 3

F64

½" 1"


XYA

LL-1

XYB

LL-1

Frame 1A 1B

O D+⅜ D+⅞

Frame 2 3

O D - 1/16 D+⅝

Diffs

ACCESSORIES

D

D D

O

D

D

O

Type A Inside

O D

Type B Outside

Type C Inside

Type D Outside

MODEL MC-1 • ONE-WAY Frame Type 1A 1B 2 3

D

Type A

MODEL MC-2 • TWO-WAY

Corner Types A & B Width Width 3½ – 5¾ 6½ – 11¾ D O D O 12 12⅜ 24 24⅜ 12 12¾ 24 24¾ 12 1115/16 24 2315/16 12 12⅝ 24 24⅝

Model 07 Directional Blades

Corner Types C & D Width Width 3½ – 5¾ 6¼ – 11¾ D O D O 12 12 24 24 12 12 24 24 12 12 24 24 12 12 24 24

Frame Type 1A 1B 2 3

Model AG-35 AG-35 mounts on neck

1" Blade Spacing 15

/16"

Model 07 is integral part of diff.

Corner Type A Width 6¼ – 12¼ D O 24 24⅜ 24 24¾ 24 2315/16 24 24⅝

Model LL BLK - Blank-Off


Mitered Corners

F

1 2 /16"

Opposed Blade Damper. AG-35 will not mount on Model 07 Directional Blades.

For all widths of Model LL diffs. Furnished in 6-foot lengths for field cutting and installation. Steel, painted flat black.

ACCESSORIES


F65

Diffs


INSTALLATIONS Side Wall A1 Side Wall

A2 Side Wall

Frame Type 1A

Frame Type 1B

Frame Type 1A

Duct by Others

Duct by Others

Duct by Others

Face or Glazed Brick

F

A3 Side Wall

Angle by Others

Finished Brick, Granite, or Marble Veneer

Finished Wood ing or Brick

Angle by Others

Ceiling

Duct by Others B3 Ceiling B1 Ceiling

Frame Type 1A

Duct by Others

Frame Type 1B


Duct by Others B4 Ceiling Frame Type 1B


INSTALLATIONS

B2 Ceiling

Duct by Others

Frame Type 3

Duct by Others B5 Ceiling Frame Type 1B


F66

Acoustical Tile

Note: Remove shipping clip before installation.

Perforated Acoustical Metal Pan Ceiling

Diffs

PERFORMANCE DATA Effective Area, Square Feet*


0.043

3½

0.072

4¼

0.106

5

0.136

5¾

0.169

6½

0.231

8

0.296

9½

0.389

11¾

Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall

0.003 21 6-9-14 4-6-12 0.005 30 6-9-17 4-7-13 0.006 40 7-10-20 4-7-15 0.008 52 8-12-22 4-8-17 0.010 67 11 9-14-25 5-10-19 0.013 90 11 10-16-30 6-11-22 0.014 115 11 12-18-33 6-13-25 0.019 160 12 14-22-39 8-15-30

0.008 32 14 9-12-18 6-9-16 0.012 46 17 10-14-21 7-10-20 0.015 61 18 10-16-24 7-11-22 0.019 79 20 12-18-28 8-13-25 0.023 100 21 14-20-31 10-14-29 0.028 135 21 16-24-36 11-17-33 0.032 170 21 17-26-41 12-18-37 0.040 235 22 21-32-48 15-22-44

0.014 42 21 11-14-20 8-12-19 0.021 61 24 13-17-24 9-13-22 0.026 81 25 14-20-28 10-15-26 0.033 105 27 16-23-32 11-17-29 0.041 133 28 18-25-36 13-19-33 0.050 180 29 21-30-42 15-22-39 0.058 230 29 24-33-47 17-25-44 0.072 315 29 28-39-55 20-30-51

0.022 53 27 13-16-23 10-15-21 0.032 76 29 16-19-27 11-17-25 0.040 101 30 17-22-31 12-18-29 0.052 131 32 20-25-36 14-21-33 0.065 167 34 23-28-40 16-24-37 0.079 225 34 26-33-47 18-28-43 0.092 290 35 30-37-53 21-32-49 0.116 400 35 36-44-62 25-38-58

0.032 64 31 14-18-25 12-16-23 0.046 91 34 17-21-30 13-19-27 0.057 121 35 20-24-34 15-22-32 0.074 157 37 23-28-39 17-25-36 0.093 200 39 25-31-44 19-29-41 0.109 265 39 29-36-51 22-33-47 0.134 350 39 34-41-58 25-38-54 0.160 470 39 39-48-67 30-44-62

0.043 74 35 15-19-27 14-18-25 0.062 106 38 18-23-32 16-21-30 0.079 142 39 21-26-37 17-24-34 0.101 183 41 24-30-42 20-28-39 0.127 234 42 27-34-48 22-31-44 0.155 315 43 32-39-55 26-36-51 0.184 410 43 36-45-63 30-41-58 0.219 550 43 42-52-73 35-48-67

0.057 85 38 17-20-29 15-19-27 0.082 122 41 20-24-34 18-22-32 0.103 162 42 23-28-40 20-26-37 0.133 210 44 26-32-45 22-29-42 0.166 267 46 29-36-51 26-33-47 0.196 355 46 34-41-59 29-38-54 0.231 460 46 39-47-67 33-44-62 0.344 690 49 47-58-82 44-53-76

0.071 95 41 18-21-30 16-20-28 0.104 137 44 21-26-36 19-24-34 0.129 182 45 24-30-42 22-27-39 0.168 236 47 28-34-48 25-31-44 0.219 307 49 31-39-55 29-36-50 0.262 410 50 36-45-63 34-41-58 0.296 520 49 41-50-71 38-46-66 0.375 720 50 48-59-83 45-55-77

0.089 106 44 18-23-32 17-21-30 0.127 152 47 22-27-38 20-25-35 0.159 202 48 26-31-44 24-29-41 0.207 262 50 29-36-50 27-33-47 0.259 334 52 33-40-57 30-37-53 0.309 445 52 38-46-66 35-43-61 0.368 580 52 43-53-75 40-49-69 0.440 780 52 50-61-87 46-57-80

Total Pressure 0.005 0.012 0.021 cfm per foot 41 62 82 NC (Noise Criteria) 18 25 Throw, Ceiling 5-8-14 8-12-17 10-14-19 Total Pressure 0.008 0.018 0.031 cfm per foot 62 94 125 NC (Noise Criteria) 21 28 Throw, Ceiling 6-9-17 9-14-21 13-17-24 Total Pressure 0.010 0.022 0.040 cfm per foot 84 126 168 NC (Noise Criteria) 12 22 29 Throw, Ceiling 7-11-19 11-16-24 15-19-27 Total Pressure 0.012 0.027 0.048 cfm per foot 107 160 214 NC (Noise Criteria) 13 23 30 Throw, Ceiling 8-12-22 12-19-27 17-22-31 Total Pressure 0.014 0.031 0.055 cfm per foot 131 197 262 NC (Noise Criteria) 13 23 30 Throw, Ceiling 9-14-24 14-21-30 18-24-34

0.033 103 31 12-15-22 0.049 156 33 15-19-26 0.062 210 35 18-22-31 0.074 267 35 20-25-35 0.086 328 36 22-27-38

0.047 124 35 14-17-24 0.070 187 38 17-21-29 0.089 252 39 19-24-34 0.107 320 40 22-27-38 0.125 394 40 24-30-42

0.064 144 39 15-18-25 0.095 218 42 18-22-31 0.053 194 43 17-21-30 0.146 374 44 24-29-41 0.169 459 44 26-32-45

0.084 165 42 16-19-27 0.125 250 45 19-24-34 0.159 336 46 22-27-39 0.190 427 47 25-31-44 0.221 525 47 28-34-49

0.105 185 45 17-20-29 0.158 281 48 21-25-36 0.201 378 49 24-29-41 0.241 481 50 27-33-47 0.270 580 50 29-36-51

0.131 206 48 18-22-30 0.195 312 51 22-26-37 0.248 420 52 25-31-43 0.297 534 52 28-35-49 0.345 656 53 31-38-54


LL-1 - ONE-WAY BLOW PATTERN

F

LL-2 - TWO-WAY BLOW PATTERN Nominal Duct Width, Inches

0.101

6¼

0.157

7¾

0.213

9¼

0.269

10¾

0.325

12¼

PERFORMANCE DATA

Effective Area, Square Feet*

F67

Diffs


PERFORMANCE DATA

PERFORMANCE DATA

F

F68

• All pressures are in inches of water. • Throw velocities are given for isothermal terminal velocities of 150, 100 and 50 fpm. For an explanation of data, see the Engineering Guidelines section. • Throw values are based on an active section 4 feet long. Multipliers for correcting the throw for other lengths are shown in the following table. • NC values are based on a room absorption of 10 dB, re 10-12 watts, with a 4-foot active diff section. Corrections for other lengths are shown in the table below.

Throw Correction for Length (multiply)

• When the diff is used as a return intake, the NC value is increased by 4, and the negative static pressure is 0.8 times the listed total pressure. • Dash (-) in space denotes an NC value less than 10. • For continuous lengths, the selection for NC is usually based on a 10-foot section. • These products have been tested per ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • An asterisk (*) indicates effective free area per linear foot.

NC Correction for Length (add)

Active Length (ft)

2

4

8

10

Active Length (ft)

2

4

6

8

10

Throw Correction

0.72

1

1.5

1.7

NC Correction

-3

0

2

3

5

Diffs


The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering, or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied.

ALUMINUM Available Models: LL-1 LL-2

• One-Way Pattern • Fixed Louvers • Two-Way Pattern • Fixed Louvers

Linear louver diffs shall be Titus model LL-1 (oneway) or LL-2 (two-way opposite). The diff shall be constructed of extruded aluminum and shall be built in standard one-piece lengths up to 6 feet and shall have the sizes and mounting types shown on the plans and outlet schedule. Lengths greater than 6 feet shall be furnished in multiple sections and will be ed together end-to-end with factory provided alignment pins to form a continuous appearance. All alignment components to be provided by the manufacturer.The diff core shall have fixed extruded aluminum deflection louvers locked together into a single assembly. The diff frame shall be heavy extruded aluminum construction. The louvered core assembly shall be removable from the outer frame for easy installation.

Optional opposed blade damper shall be constructed of heavy gauge steel (aluminum also available). Damper must be operable from the face of the diff. Optional directional blades, blank-offs and extruded aluminum mitered corners shall also be available. The manufacturer shall provide published performance data for the linear louver diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

F

MODEL NUMBER SPECIFICATION Model LL-1 LL-2

Finish 01 Aluminum 26 White 34 Clear Anodized

1-Way 2-Way

XX-X

XX

Frame Type

1A 1B 2 3

See page F64 for details

XX


LINEAR LOUVER DIFFS

Optional Damper AG-35

X

Opposed Blade

XX-XX Fastening

N

None

SPECIFICATIONS F69

Diffs

F

TMR, TMR-AA TWO HORIZONTAL DISCHARGE PATTERNS Available Models: TMR TMR-AA

• Uniform 360° discharge pattern.

TMR, TMR-AA


Round Ceiling Diffs

• Excellent performance in variable air volume systems.

• Steel • Aluminum

Products Include: • Standard Finish - #26 White. • Optional Finishes - #01 Aluminum. • Models TMR and TMR-AA round ceiling diffs are designed for cooling applications. • All sizes have three cones, giving a uniform appearance where different sizes are used in the same area.

• The two horizontal discharge settings allow the diff to be adjusted for two different flow rate conditions. At Position 1, maximum capacity is obtained. At Position 2, induction is increased.

• Retainer cable provided to allow the inner core assembly to hang during maintenance of diffs with a neck size of 12 inches or greater.

• Adjustment achieved by removing the two inner cones as a unit and repositioning six screws.

• Material is steel (TMR) or aluminum (TMR-AA) with steel screws.

• Spring lock allows easy removal and replacement of the two inner cones.

Outside Diameter C Ceiling Opening Diameter B Nominal Round Duct Size D D minus 1/32"

¾"

E (position 1) E (position 2)

TMR, TMR-AA

Note: Position 1 is with cones down. Position 2 is with cones up. Nominal Round Duct Size D 6 8 10 12 14 16 18 20 (Note) 24 (Note) 30 (Note) 36 (Note)

B

C

6½ 8½ 10½ 12½ 14½ 16½ 18½ 20½ 24½ 30½ 36½

11⅛ 14¾ 18¼ 22 26 29 32½ 36 43¼ 53¾ 64½

E E (Pos. 1) (Pos. 2) 1¾ 1⅛ 2⅛ 1½ 2⅞ 2⅛ 3⅛ 2⅜ 3⅜ 2⅝ 4 3¼ 4¾ 3⅞ 5⅞ 4⅞ 7¾ 6⅝ 8⅛ 6⅝ 10⅛ 8⅜

Note: Sizes 20 through 36 are available in steel only.

F70


Diffs

PERFORMANCE DATA

6" Dia.

8" Dia.

10" Dia.

12" Dia.

14" Dia.

16" Dia.

18" Dia.

20" Dia.

24" Dia.

30" Dia.

600 0.022 0.065 0.106 120 18 2-4-7 3-4-7 210 12 19 3-5-9 4-6-9 327 14 20 4-6-12 5-7-12 470 16 21 5-7-14 6-8-14 635 17 22 6-8-16 7-10-16 840 18 23 7-10-18 8-11-19 1060 19 24 7-11-21 8-13-21 1310 20 24 8-12-23 9-14-24 1880 22 25 10-15-28 11-17-28 2940 23 27 12-18-35 14-21-35 4230 25 28 15-22-41 17-25-42

• All pressures given are in inches of water. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. • To obtain static pressure, subtract the velocity pressure from the total pressure. • If the diff is mounted on an exposed duct, the throw values are 70% of those listed in the table and will project downward. • Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts.

700 0.031 0.089 0.145 140 14 22 3-4-8 3-5-8 245 17 24 4-6-10 4-7-10 382 19 25 5-7-12 5-8-13 550 20 26 6-9-15 7-10-15 745 22 27 7-10-17 8-11-18 980 23 28 8-11-20 9-13-20 1240 24 28 9-13-22 10-15-23 1530 25 29 10-14-25 11-16-25 2200 27 30 11-17-30 13-20-31 3430 28 31 14-21-37 16-25-38 4930 30 32 17-26-45 20-29-46

800 900 1000 1200 1400 0.040 0.051 0.062 0.090 0.122 0.116 0.146 0.181 0.260 0.354 0.189 0.239 0.295 0.425 0.578 160 180 200 235 275 19 23 26 32 37 26 29 32 38 42 3-5-8 4-6-9 4-6-9 5-7-10 6-7-11 4-6-8 4-6-9 5-7-9 6-7-10 6-8-11 280 315 350 420 490 21 25 28 34 39 28 31 34 39 44 4-7-11 5-7-11 5-8-12 7-9-13 8-10-14 5-8-11 6-8-12 6-9-12 8-9-13 8-10-14 436 491 545 654 763 23 27 30 36 41 29 32 35 41 45 5-8-13 6-9-14 7-10-15 8-12-16 10-12-18 6-9-14 7-10-14 8-11-15 9-12-17 10-13-18 630 705 785 940 1100 25 29 32 38 43 30 33 36 42 46 7-10-16 7-11-17 8-12-18 10-14-20 11-15-21 8-11-16 8-12-17 9-13 -18 11-14-20 12-15-22 850 955 1060 1270 1490 26 30 33 39 44 31 34 37 42 47 8-11-19 8-13-20 9-14-21 11-16-23 13-17-25 9-13-19 10-14-20 11-15-21 13-16-23 14-18-25 1120 1260 1400 1680 1960 27 31 34 40 45 31 35 38 43 48 9-13-21 10-15-23 11-16-24 13-18-26 15-20-28 10-15-22 11-16-23 13-17-24 15-19-27 17-20-29 1420 1590 1770 2120 2480 28 32 35 41 46 32 36 39 44 48 10-15-24 11-17- 25 12-18-27 15-21-29 17-22-32 11-17-25 13-18-26 14-19-27 17-21-30 19-23-32 1750 1970 2190 2610 3060 29 33 36 42 47 33 36 39 45 49 11-16-27 12-18-28 14-20-30 16-23-33 19-25-35 13-19-27 14-20-29 16-22-30 19-24-33 21-25-36 2510 2820 3140 3770 4400 31 35 38 44 49 34 37 40 46 50 13-20-32 15-22-34 16-24-36 20-28-39 23-30-42 15-23-33 17-24-35 19--26-36 23-28 -40 25-31-43 3920 4410 4900 5880 6860 33 37 40 46 51 35 38 41 47 51 16-24-40 18-27-42 20-31-45 24-35-49 28-37-53 19-28-41 21-31-43 23-32-46 28-35-50 31-38-54 5630 6340 7040 8450 9850 34 38 41 47 52 36 39 43 48 52 19-29-48 22-33-51 24-37-53 29-41-59 34-45-63 22-34-49 25-37-52 28-39-55 34-42-60 37-46-65

• Dash (-) in space denotes an NC value of less than 10. • Diffs are shipped in Position 2 (cones down). • Data obtained from tests conducted in accordance with ANSI / ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines, for additional information. • For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog.

F

PERFORMANCE DATA

36" Dia.

Neck Velocity 400 500 Velocity Pressure 0.010 0.016 Total Pressure, Pos. 1 0.029 0.045 Total Pressure, Pos. 2 0.047 0.074 Airflow, cfm 80 100 NC, Pos.1 NC, Pos.2 12 Throw feet, Pos. 1 2-2-5 2-3-6 Throw feet, Pos. 2 2-3-6 2-4-7 Airflow, cfm 140 175 NC, Pos.1 NC, Pos.2 14 Throw feet, Pos. 1 2-3-7 3-4-8 Throw feet, Pos. 2 3-4-8 3-5-9 Airflow, cfm 218 273 NC, Pos.1 NC, Pos.2 15 Throw feet, Pos. 1 3-4-8 3-5-10 Throw feet, Pos. 2 3-5-9 4-6-11 Airflow, cfm 315 390 NC, Pos.1 NC, Pos.2 16 Throw feet, Pos. 1 3-5-10 4-6-12 Throw feet, Pos. 2 4-6-11 5-7-13 Airflow, cfm 425 530 NC, Pos.1 11 NC, Pos.2 11 17 Throw feet, Pos. 1 4-6-11 5-7-14 Throw feet, Pos. 2 4-7-13 5-8-15 Airflow, cfm 560 700 NC, Pos.1 12 NC, Pos.2 11 18 Throw feet, Pos. 1 4-7-13 5-8--16 Throw feet, Pos. 2 5-8-15 6-9-17 Airflow, cfm 710 885 NC, Pos.1 13 NC, Pos.2 12 18 Throw feet, Pos. 1 5-7-15 6-9-18 Throw feet, Pos. 2 6-8--17 7-11-19 Airflow, cfm 875 1100 NC, Pos.1 14 NC, Pos.2 13 19 Throw feet, Pos. 1 5-8-16 7-10-21 Throw feet, Pos. 2 6-9-19 8-12-22 Airflow, cfm 1260 1570 NC, Pos.1 16 NC, Pos.2 14 20 Throw feet, Pos. 1 7-10-20 8-12-24 Throw feet, Pos. 2 8-11-23 9-14-26 Airflow, cfm 1960 2450 NC, Pos.1 18 NC, Pos.2 15 21 Throw feet, Pos. 1 8-12-24 10-15-31 Throw feet, Pos. 2 9-14-28 12-18-32 Airflow, cfm 2820 3520 NC, Pos.1 12 19 NC, Pos.2 16 22 Throw feet, Pos. 1 10-15-29 12-18-37 Throw feet, Pos. 2 11-17-34 14-21-39


TMR, TMR-AA

F71

Diffs



F

ROUND CEILING DIFFS Available Models: TMR TMR-AA


Round ceiling diffs shall be Titus model TMR (steel) or TMR-AA (aluminum with steel screws). The TMR and TMRAA models shall have three round cones and round neck inlets of the sizes and mounting types shown on the plans and outlet schedule. Two horizontal discharge settings shall allow the diff to be field adjusted for different flow rate conditions. The two inner cones must be easily removable as a unit using a spring lock mechanism. Round diffs shall be constructed of 18 gauge steel or 0.051 aluminum. The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30

TMR Neck Size

SPECIFICATIONS

Optional round damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff. A retainer cable shall be provided to allow the inner core assembly to hang during maintenance of diffs with a neck size of 12 inches or greater. The manufacturer shall provide published performance data for the round diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

MODEL NUMBER SPECIFICATION Finish 26 01

Model Steel

F72

minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied.

XX

Neck Size

White Aluminum XX-XXX D-100 AG-100 D-75 AG-75 AG-65 AG-85

Finish 26 White 01 Aluminum XX 6, 8, 10, 12, 14, 16, 18

XXX Optional Damper

6, 8, 10, 12, 14, 16, 18, 20, 24, 30, 36

Model Aluminum TMR-AA

XX

Accessories EG Foam Gasket FG Earthquake Tabs EQT Equalizing Grid

XX

Radial, Neck Mount Radial, Duct Mount Opposed Blade, Neck Mount Opposed Blade, Duct Mount Combination, Duct Mount Butterfly, Duct Mount

Accessories EG Foam Gasket FG Earthquake Tabs EQT Equalizing Grid

XX-XXX

XXX Optional Damper

D-100 AG-100 D-75 AG-75 AG-65 AG-85


Diffs

Round Ceiling Diffs (continued)

Available Models: TMRA TMRA-AA


• Discharge pattern can be adjusted for horizontal flow by extending the cones or for vertical flow by retracting the cones.

Products Include: • Standard Finish - #26 White.


• Optional Finishes - #01 Aluminum.

• Excellent performance in variable air volume systems and open ceiling applications.

• Models TMRA and TMRA-AA adjustable round ceiling diffs are designed for both heating and cooling applications.

• Type 1 with three fixed cone positions, is adjusted by removing the three inner cones as a unit and repositioning. Available in duct sizes 6” through 36” steel, 6” through 18” aluminum. • Type 2 (steel only) is adjusted by sliding the three inner cones up or down. Available in duct sizes 6” through 12”. • Type 3 (steel only) is adjusted by rotating the center cone. Available in duct sizes 6” through 36”.

Outside Diameter C Ceiling Opening Diameter B Nominal Round Duct Size D

• Optional Type B outer cone reduces ceiling smudging. Also useful where the plenum height or the space for the ceiling opening is limited. Available for diffs with duct sizes 6” through 24” for steel diffs, 6” through 18” for aluminum diffs.

D minus 1/32"

¾" H E Open F Closed

Model B Outer Core (optional)

TMRA, TMRA-AA

• All sizes have four cones, giving uniformity of appearance where different sizes are used in the same area.

VERTICAL TO HORIZONTAL DISCHARGE PATTERN - ADJUSTABLE


TMRA, TMRA-AA

F

• Spring lock allows easy removal and replacement of the three inner cones.

Outside Diameter BC Ceiling Opening Diameter BB

• Retainer cable provided to allow the inner core assembly to hang during maintenance of diffs with a neck size of 12” or greater.

Nominal Round Duct Size D

• Material is steel or aluminum with steel components. Model B Outer Cone

B

C

E

F

H

P1

12 16 20 24 28 32 36 40 48 60 60

13½ 18 22½ 27 31½ 36 40½ 45½ 54½ 67½ 67½

17/16 113/16 2¼ 211/16 3⅛ 35/16 3¾ 4⅛ 4⅞ 59/16 59/16

/16 ⅞ 1⅛ 1¼ 13/16 15/16 1½ 1⅝ 1⅞ 1⅞ 1⅞

1⅝ 2⅛ 2⅝ 3¼ 3¾ 4¼ 4⅞ 5⅜ 6½ 8 8

2½ 2⅝ 2¾ 3½ 3⅛ 3⅜ 4⅜

11

Type B Cone BB BC 7 17¾ 9 23¼ 11 29 13 34⅞ 15 40⅝ 17 46¾ 19 51⅜ 21 56¼ 25 67 NA NA NA NA


Note 1: An asterisk (*) indicates the adjusting shaft will project above the diff neck on sizes 14 through 36 of TMRA models with Type 3 Rotating Adjustment. The maximum projection is the same as Dimension P. Neck-mounted dampers are not compatible when in a heating configuration. Note 2: Sizes 20 through 36 are available in steel only.

TMRA, TMRA-AA

Nominal Round Duct Size D 6 8 10 12 14 16 18 202 242 302 362

F73

Diffs


PERFORMANCE DATA TMRA, TMRA-AA

6"

8"

10"

12"

14"

F

16"

18"

20"

24"

30"

PERFORMANCE DATA

36"

F74

Neck Velocity Velocity Pressure Total Pressure, Hor. Total Pressure, Vert. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft.

Neck Velocity 10o F Differential 20o F Differential 30o F Differential 40o F Differential

400 500 600 700 0.010 0.016 0.022 0.031 0.021 0.033 0.047 0.064 0.027 0.043 0.061 0.083 80 100 120 140 15 20 25 2-2-5 2-3-6 2-3-7 3-4-7 140 175 210 245 16 21 26 2-3-6 2-4-7 3-4-9 3-5-10 218 273 327 382 17 22 27 2-4-7 3-5-9 4-6-11 4-7-12 315 390 470 550 11 17 23 27 3-4-9 4-6-11 4-7-13 5-8-14 425 530 635 745 11 18 23 28 3-5-10 4-6-13 5-8-15 6-9-17 560 700 840 980 12 18 24 28 4-6-12 5-7-15 6-9-18 7-10-19 710 885 1060 1240 12 19 24 29 4-7-13 6-8-17 7-10-20 8-12-21 875 1100 1310 1530 13 19 25 29 5-7-15 6-9-19 7-11-22 9-13-24 1260 1570 1880 2200 13 20 25 30 6-9-18 7-11-22 9-13-26 10-16-29 1960 2450 2940 3430 14 21 26 31 7-11-22 9-14-28 11-17-33 13-20-36 2820 3520 4230 4930 15 22 27 32 9-13-27 11-17-33 13-20-40 16-23-43

400 6-6-3 4-4-2 3-3-2 3-2-2

800 0.040 0.084 0.109 160 29 3-5-8 280 30 4-6-10 436 31 5-7-13 630 31 6-9-15 850 32 7-10-18 1120 32 8-12-20 1420 33 9-13-23 1750 33 10-15-25 2510 34 12-18-30 3920 35 15-22-38 5630 36 18-27-46

900 0.051 0.106 0.138 180 32 3-5-8 315 33 4-7-11 491 34 6-8-13 705 35 7-10-16 955 35 8-12-19 1260 36 9-13-22 1590 36 10-15-24 1970 37 11-17-27 2820 38 13-20-32 4410 38 17-25-40 6340 39 20-30-48

1000 0.062 0.131 0.170 200 35 4-6-9 350 36 5-7-11 545 37 6-9-14 785 38 7-11-17 1060 39 9-13-20 1400 39 10-15-23 1770 40 11-17-26 2190 40 12-19-28 3140 41 15-22-34 4900 42 19-28-43 7040 42 22-33-51

1200 0.090 0.189 0.245 235 41 4-7-9 420 42 6-9-12 654 43 7-11-16 940 43 9-13-19 1270 44 10-15-22 1680 45 12-18-25 2120 45 13-20-28 2610 45 15-22-31 3770 46 18-26-37 5880 47 22-33-47 8450 48 27-40-56

1400 0.122 0.257 0.334 275 45 5-7-10 490 47 7-10-13 763 47 9-12-17 1100 48 10-14-20 1490 49 12-17-23 1960 49 14-19-27 2480 50 16-21-30 3060 50 17-24-34 4400 51 21-29-40 6860 52 26-36-50 9850 52 31-43-60

Downward Projection of Heated Air, Ft. 500 600 700 800 8-8-6 10-12-11 13-15-16 15-19-24 6-7-5 7-8-7 9-11-11 10-14-16 5-5-4 6-7-6 7-9-9 9-11-13 4-4-3 5-6-6 7-8-9 8-10-12

900 17-23-28 12-16-20 10-13-16 9-12-15

1000 19-25-33 13-18-24 11-15-19 10-13-17

1200 21-32-42 15-17-30 13-18-25 11-16-22

1400 25-38-52 17-25-36 14-20-30 12-18-27

Note: The three neck velocity values used are for 6-, 12- and 24-inch diffs respectively. • All pressures are given in inches of water. • Throw values are given for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. • To obtain static pressure, subtract the velocity pressure from the total pressure. • If the diff is mounted on an exposed duct, the throw values are 70 percent of those listed in the table. • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts.

• Dash (-) in space denotes an NC value of less than 10. • Add 1 NC for vertical setting. • Downward projection of heated air values represent the distance to a total air velocity of essentially zero. • Data obtained from tests conducted in accordance with ANSI / ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section Engineering Guidelines of this catalog for additional information. • For an explanation of catalog throw data, see the section, Engineering Guidelines.

Diffs

SUGGESTED SPECIFICATIONS ADJUSTABLE VERTICAL TO HORIZONTAL DISCHARGE PATTERN Available Models: TMRA TMRA-AA


• Type 1. The inner cone assembly can be removed and repositioned by means of adjusting screws. • Type 2. The inner cone assembly can be adjusted by sliding the cones up or down. • Type 3. The center cone can be rotated clockwise or counterclockwise to move the cones up or down.

Round ceiling diffs shall be Titus model TMRA (steel, adjustable) or TMRA-AA (aluminum with steel screws, adjustable). The TMRA or TMRA-AA models shall have four cones and round neck inlets of the sizes and mounting types shown on the plans and outlet schedule. Round diffs shall be constructed of 18-gauge steel (TMRA) or 0.051 aluminum (TMRA-AA). The airflow discharge pattern shall be field adjustable from horizontal to vertical by extending or retracting the inner three cones. These three cones shall be constructed as

inner core assembly to hang during maintenance of diffs with a neck size of 12inches or greater. The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. The manufacturer shall provide published performance data for the round diff. The diff shall be tested in accordance with ANSI/ ASHRAE Standard 70-2006.

Optional round damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff. A retainer cable shall be provided to allow the

F


Finish 26 White 01 Aluminum

Model Adjustable, Steel TMRA Neck Size

XX

XX

6, 8, 10, 12, 14, 16, 18, 20, 24, 30, 36

Accessories Equalizing Grid EG Foam Gasket FG Outer Cone - Steel B Earthquake Tabs EQT

XX-XXX D-100 AG-100 D-75 AG-75 AG-65 AG-85


a single inner assembly and must be easily removable using a spring lock mechanism. Vertical to horizontal discharge pattern must be achieved by one of three adjustment methods as follows:

ROUND CEILING DIFFS

XXX

X

Optional Damper (note)

1 2 3

Radial, Neck Mount Radial, Duct Mount Opposed Blade, Neck Mount

3 Fixed Positions Slide Rotating See page F73 for available sizes

Opposed Blade, Duct Mount

Adjustment

Combination, Duct Mount Butterfly, Duct Mount

Accessories EG Foam Gasket FG Outer Cone - Aluminum BAA Earthquake Tabs EQT Equalizing Grid

TMRA-AA Neck Size

XX 6, 8, 10, 12, 14, 16, 18

Finish 26 01 XX

White Aluminum XX-XXX

SPECIFICATIONS

Model Adjustable, Aluminum

XXX Optional Damper (note)

D-100 AG-100 D-75 AG-75 AG-65 AG-85


Note: See damper model for size availability.

F75

Diffs

F

XC-310 ADJUSTABLE HEAVY DUTY - STEEL Available Model: XC-310 • Steel • Ring Operated • Vertical to Horizontal Discharge Pattern

• Discharge pattern can be adjusted from full horizontal to full vertical. At the full vertical setting the diff forces the air in a long downward projection. The result is effective heating and spot cooling from high mounting locations.

XC-310



Products Include: • Standard Finish - #26 White. • Model XC-310 heavy duty round ceiling diffs are designed for both heating and cooling applications.

• Especially suitable for factories, warehouses, convention halls, coliseums, shopping malls, and other applications where ceilings are high and conditions are variable.

• Optional damper is adjustable by removing the inner core of the diff. • Material is steel.


• Ring operator can be adjusted with a pole.

• Excellent performance in variable air volume applications.

• Outer cone is contoured to guard against ceiling smudging. Outside Diameter C Ceiling Opening Diameter B Nominal Round Duct Size D D minus 1/32"

Face View

E Open F Closed

Threaded Post Nut G

XC-310

Ring Operator

F76


B

C

E

F

G

10 12 14 16 18 20 24 30 36

10½ 12½ 14½ 16½ 18½ 20½ 24½ 30½ 36½

18¼ 22 26 29 32½ 36 43¼ 53⅝ 64⅜

7½ 9⅜ 6¾ 8½ 9⅛ 10⅜ 12¼ 13⅞ 15⅝

3 4 4 5 5 5½ 6⅝ 8¼ 10

10 12 14 16 18 20 24 30 36


Diffs

PERFORMANCE DATA

10" DIa.

12" DIa.

14" DIa.

18" DIa.

20" DIa.

24" DIa.

30" DIa.

400 0.010 220 0.021 0.012 1-2-4 16 5 315 0.021 0.012 11 2-2-5 14 4 425 0.020 0.012 12 2-3-5 13 4 710 0.020 0.011 13 2-3-7 14 4 875 0.020 0.010 14 11 3-4-8 14 4 1260 0.019 0.010 15 12 3-5-9 16 5 1963 0.017 0.009 16 13 4-6-12 19 2 2827 0.016 0.007 17 14 5-7-14 22 1

500 0.016 270 0.033 0.019 17 14 2-2-5 20 7 390 0.032 0.019 18 15 2-3-6 20 6 530 0.032 0.018 19 16 2-3-7 20 6 885 0.031 0.017 20 17 3-4-9 21 6 1100 0.031 0.016 21 18 3-5-10 23 7 1570 0.029 0.014 22 19 4-6-12 25 7 2454 0.027 0.014 23 20 5-7-14 29 3 3534 0.024 0.012 24 21 6-9-17 34 2

600 0.022 330 0.047 0.027 22 19 2-3-6 24 8 470 0.046 0.028 23 20 2-3-7 24 8 635 0.046 0.028 24 21 3-4-8 26 8 1060 0.045 0.028 26 23 3-5-10 30 9 1310 0.044 0.028 26 23 4-6-12 32 9 1880 0.042 0.028 27 24 5-7-14 35 10 2945 0.039 0.020 29 26 6-9-17 42 5 4241 0.035 0.017 30 27 7-10-21 49 3

• All pressures are in inches of water. • Radius of diffusion values are given for a terminal velocity of 50 fpm with a 20°F cooling temperature differential. • Vertical projection values are given for a terminal velocity of 50 fpm. Minimum projections are for a 40°F heating temperature differential, while maximum projections are for a 20°F cooling differential.

700 0.031 380 0.064 0.037 27 24 2-3-7 28 9 550 0.063 0.038 28 25 3-4-8 28 9 745 0.063 0.038 29 26 3-5-9 31 10 1240 0.061 0.038 31 28 4-6-12 37 12 1530 0.060 0.038 31 28 4-7-13 40 13 2200 0.057 0.038 32 29 5-8-16 47 14 3436 0.053 0.027 34 31 7-10-20 57 7 4948 0.048 0.023 35 32 8-12-24 67 4

800 0.040 435 0.083 0.048 31 28 3-4-8 32 11 630 0.083 0.050 32 29 3-5-9 33 11 850 0.082 0.050 33 30 4-5-11 35 12 1420 0.079 0.050 35 32 5-7-14 42 14 1750 0.078 0.050 35 32 5-8-15 46 15 2510 0.075 0.050 36 33 6-9-18 54 18 3927 0.069 0.036 38 35 8-12-23 66 9 5655 0.063 0.030 39 36 9-14-28 78 5

900 1000 1200 1400 1600 0.051 0.062 0.090 0.122 0.160 490 545 655 765 870 0.105 0.130 0.187 0.255 0.333 0.061 0.076 0.109 0.148 0.194 35 38 44 49 53 32 35 41 46 50 3-4-9 3-5-10 4-6-12 4-7-13 5-8-15 36 40 48 56 63 12 13 16 19 21 705 785 940 1100 1255 0.104 0.129 0.186 0.253 0.330 0.063 0.078 0.113 0.153 0.200 36 39 45 50 54 33 36 42 47 51 3-5-10 4-6-12 5-7-14 5-8-16 6-9-18 36 41 49 57 65 12 14 16 19 22 955 1060 1270 1490 1695 0.103 0.128 0.184 0.250 0.327 0.063 0.078 0.113 0.153 0.200 37 40 46 51 55 34 37 43 48 52 4-6-12 4-7-13 5-8-16 6-9-19 7-11-21 39 44 52 61 70 13 15 17 20 23 1590 1770 2120 2480 2830 0.101 0.124 0.179 0.243 0.318 0.063 0.078 0.113 0.153 0.200 38 42 47 52 56 35 39 44 49 53 5-8-16 6-9-17 7-10-21 8-12-24 9-14-28 47 53 63 74 84 16 18 21 25 28 1970 2190 2610 3060 3500 0.099 0.122 0.176 0.239 0.312 0.063 0.078 0.113 0.153 0.200 39 42 48 53 57 36 39 45 50 54 6-9-17 6-10-19 8-11-23 9-13-27 10-15-31 52 57 68 80 92 17 19 23 27 31 2820 3140 3770 4400 5020 0.095 0.117 0.169 0.230 0.300 0.063 0.078 0.113 0.153 0.200 40 43 49 54 58 37 40 46 51 55 7-10-21 8-12-23 9-14-28 11-16-32 12-18-37 60 67 81 94 107 20 22 27 31 36 4418 4909 5890 6872 7854 0.088 0.108 0.156 0.213 0.278 0.045 0.056 0.081 0.110 0.144 41 45 50 55 59 38 42 47 52 56 9-13-26 10-14-29 12-17-35 13-20-40 15-23-46 74 82 99 115 132 11 14 20 25 28 6362 7069 8482 9896 11310 0.079 0.098 0.141 0.191 0.250 0.038 0.046 0.067 0.091 0.119 42 46 51 56 60 39 43 48 53 57 10-16-31 12-17-35 14-21-41 16-24-48 18-28-55 88 98 117 137 156 6 8 11 15 20

• NC values are based on a room absorption of 10 dB, re 10-12 watts. Values shown are for the horizontal discharge pattern (center closed). For the vertical pattern (center open), subtract three. • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information.

F

PERFORMANCE DATA

36" DIa.

Neck Velocity Velocity Pressure Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet,H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm


XC-310

F77

Diffs



F

ROUND CEILING DIFFS

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering, or deterioration of film.

ADJUSTABLE HEAVY DUTY Available Model: XC-310

• Steel

Round ceiling diffs shall be Titus model XC-310 heavy duty ring operated diffs of the sizes and mounting type shown on the plans and outlet schedule. The diff shall be constructed of 18-gauge steel with a contoured outer cone to guard against ceiling smudging and an inner vane assembly. The airflow discharge pattern shall be field adjustable from horizontal to vertical by rotating a ring operator to open (vertical discharge) or close (horizontal discharge) the inner vane assembly. The inner vane assembly must be easily removable as a unit. The ring operator shall be adjustable with a pole for remote access.

Ring Operated, Vertical to Horizontal Discharge

XC-310 Neck Size

XX 10, 12, 14, 16, 18, 20, 24, 30, 36

Finish 26 White 01 Aluminum XX

The manufacturer shall provide published performance data for the round diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

Accessories EG Earthquake Tabs EQT Equalizing Grid

XX-XXX


AG-100 AG-75 AG-65 AG-85


SPECIFICATIONS

Optional round damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff by removing the inner vane assembly.

MODEL NUMBER SPECIFICATION Model

F78

The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied.

Radial, Duct Mount Opposed Blade, Duct Mount Combination, Duct Mount Butterfly, Duct Mount

Diffs


ADJUSTABLE VORTEX - STEEL


Available Model: V-1 • Vortex Diff Products Include: • Standard Finish - #84 Black.

• Excellent performance in variable air volume applications.

• Vortex generators spin the air in a spiral pattern. This creates a Coanda effect, forcing the air to adhere to the curved border and spread evenly across the ceiling.

V-1

• Model V-1 round ceiling diffs are designed for both heating and cooling applications.

• Especially suitable for foyers, waiting rooms and other areas with recessed lighting fixtures. Complements black light and down light fixtures. • Adjusted from horizontal to vertical discharge vortex by opening the blank-off plate in the center.

• Optional damper is adjusted through the diff face. Access for adjustment is gained by opening the blank-off plate. • Material is steel.


G

6 8 10 12 14 16 18

3⅞ 5⅛ 63/16 87/16 97/16 107/16 127/16


V-1

F

H Nominal Round Duct Size D

3⅞ 3⅞ 3⅞ 4⅞ 4⅞ 4⅞ 4⅞

D minus 1/8" G

Vortex Generators

Blank-Off Plate

8"

H 1" Radius

D Plus 2"

V-1


F79

Diffs


PERFORMANCE DATA

F

V-1 6" Dia.

Airflow, cfm Total Press. Rad. of Diff. NC

50 0.07 1–1–1 —

75 0.14 1–1–2 19

87 0.19 1–2–2 23

100 0.25 1–2–3 27

115 0.33 1–2–3 30

125 0.39 2–2–4 34

137 0.47 2–3–4 37

150 0.56 2–3–5 39

8" Dia.


125 0.12 1–2–3 20

150 0.18 2–2–4 25

175 0.23 2–3–4 29

200 0.3 2–3–5 32

225 0.38 2–3–6 35

250 0.47 2–4–6 39

275 0.55 3–4–7 42

300 0.66 3–5–8 44

10" Dia.


150 0.15 1–2–3 21

175 0.2 2–2–4 25

200 0.26 2–3–4 28

225 0.33 2–3–5 32

250 0.4 2–4–6 35

275 0.48 2–4–6 38

300 0.56 3–4–7 40

325 0.65 3–5–8 42

12" Dia.


225 0.18 2–3–4 26

250 0.23 2–3–5 29

275 0.27 2–3–6 32

300 0.32 2–4–6 35

325 0.38 3–4–7 37

350 0.45 3–4–7 39

375 0.5 3–5–8 41

400 0.57 3–5–8 43

14" Dia.


250 0.11 2–3–5 23

300 0.15 2–3–6 29

350 0.2 2–4–7 33

400 0.26 3–5–8 27

450 0.34 3–5–9 41

500 0.41 3–6–10 44

550 0.5 4–6–11 47

600 0.6 4–7–12 49

16" Dia.


400 0.18 2–4–7 30

450 0.22 3–4–7 33

500 0.29 3–5–8 36

550 0.35 3–5–9 39

600 0.41 4–6–10 42

650 0.48 4–6–11 44

700 0.56 4–7–12 46

750 0.64 4–7–13 49

18" Dia.


500 0.22 3–4–8 31

550 0.27 3–5–9 34

600 0.32 3–5–9 37

650 0.37 3–6–10 39

700 0.44 4–6–11 41

750 0.5 4–7–12 43

800 0.57 4–7–13 45

850 0.64 4–8–14 47

PERFORMANCE DATA

• All pressures are in inches of water. • Radius of diffusion values (feet) are given for terminal velocities of 150, 100 and 50 fpm. • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information.

F80

• NC (noise criteria) values are based on a room absorption of 10 dB, re 10-12 watts.

Diffs


ADJUSTABLE VORTEX Available Model: V-1 • Vortex Diff Round ceiling diffs shall be Titus Model V-1 vortex diffs of the sizes and mounting type shown on the plans and outlet schedule. The V-1 diff must have deflectors capable of generating a spiral airflow to force the jet to adhere to the curved face border and discharge evenly across the ceiling. Center deflector must be capable of creating a vertical discharge when needed. The diff shall be constructed of heavy gauge steel.

The finish shall be #84 black. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional volume damper shall be constructed of heavy gauge steel. Damper must be adjustable from the face of the diff by opening the blank-off plate. The manufacturer shall provide published performance data for the round diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

F

MODEL NUMBER SPECIFICATION Finish 26 White 01 Aluminum 84 Black

Model Vortex

V-1 Neck Size

XX 6, 8, 10, 12, 14, 16, 18

XX


ROUND CEILING DIFFS

Accessories EG Earthquake Tabs EQT Equalizing Grid

XX-XXX


AG-100 AG-75 AG-65 AG-85

Radial, Duct Mount Opposed Blade, Duct Mount Combination, Duct Mount Butterfly, Duct Mount


SPECIFICATIONS F81

1, 2, 3, OR 4-WAY DISCHARGE PATTERN Available Steel Models: PAS • Supply • Flush Face PAR • Return • Flush Face PDS • Supply • Drop Face PDR • Return • Drop Face

• A tight, uniform, horizontal blanket of air protects the ceiling against smudging. • Return models have the same face and border construction as the supply models, for harmonious appearance in the room.

Products Include: • Standard Finish - #26 White. • Titus perforated ceiling diffs are designed for both heating and cooling applications.

• Inlet collar (neck) has ample depth for easy duct connection. • Material is heavy gauge steel backpan; steel or aluminum perforated face according to the model selected.

• Discharge pattern is easily adjusted by unlatching and dropping the perforated face, then rotating the pattern controllers.

• Optional factory-installed R-6 foilbacked insulation available for 24 x 24-inch full face models, neck sizes 6-16, borders 1, 2, 3 and 4.

• Dropping the perforated face also gives access to the optional damper.

Nominal Duct Size D ● Available in supply models and return models. ❏ Available in return models only. ●/❏ Shaded areas indicate sizes available with

aluminum face.

PAS, PAR, PDS, & PDR

• Perforated face has 3/16-inch diameter holes on ¼-inch staggered centers.

• Discharge pattern (supply models) can be adjusted to vertical as well as to one-, two-, three- or fourway horizontal. Can be adjusted before or after installation.

Available Aluminum Models: PAS-AA • Supply • Flush Face PAR-AA • Return • Flush Face


6x6 8x8 10x10 12x12 14x14 15x15 18x6 18x18 22x10 22x22 46x22 6” Dia. 8” Dia. 10” Dia. 12” Dia. 14” Dia. 16” Dia.

12x12 ● ❏

●

Face or Ceiling Module Size 24x12 16x16 20x20 24x24 ● ● ● ● ● ● ● ● ● ● ❏ ● ● ❏ ❏ ❏ ❏ ●

● ● ●

● ● ● ● ●

TYPICAL DISCHARGE PATTERN - ELEVATION Ceiling

PAS

Air Flow

F82

PAS, PAR, PDS, & PDR


F

Diffs

Perforated Ceiling Diffs PAS, PAR, PDS, PDR

Ceiling Air Flow


● ● ● ● ● ●

48x24 ● ● ● ● ●

❏ ● ● ● ● ● ●

Diffs

DIMENSIONS

Border Type 3 (Lay-In)


MODELS PAS, PAS-AA - SUPPLY Border Type 4SL (Spline Side Lock) Note: 4SL can be installed after ceiling tiles are in place.

Nominal Duct Size D D minus ⅛" (4) Pattern Controllers (Adjustable)

3" Ceiling Module minus ¼" Ceiling Module Size

Border Type 1 (Surface Mount)

Ceiling Module Size minus 1/16"

Border Type 2 (Snap-In)

Nominal Face Size minus 1"

Border Type 4 (Spline)

1" Border

¼"


Nominal Face Size Nominal Face Size plus 1"

F


MODEL PDS - SUPPLY Border Type 3 (Lay-In or Tegular) (Lay-In shown)

Border Type 4SL (Spline Side Lock) Note: 4SL can be installed after ceiling tiles are in place.

Nominal Duct Size D D minus ⅛" (4) Pattern Controllers (Adjustable)

3"

⅜"

⅜" Ceiling Module minus ¼"


Ceiling Module Size




1" Border

¼"

Nominal Face Size Nominal Face Size plus 1"

⅜"

⅜"

⅜"



DIMENSIONS



F83

Diffs


DIMENSIONS OPTIONAL MOLDED INSULATION BLANKET Insulation is R-6 where blanket has the most depth. One-inch clearance on each side of neck is left for insulated duct connection. 24 x 24-inch module size only. Blanket is factory installed.

MODELS PAR, PAR-AA - RETURN Border Type 3 (Lay-In when duct size = module size - 2) Nominal Duct Size D


D minus ⅛"

2⅛"

F

Ceiling Module minus ¼" Ceiling Module Size

Border Type 3 (Lay-In for other standard duct sizes)


Border Type 4 (Spline) Nominal Duct Size D D minus ⅛"

3" Ceiling Module minus ¼" Ceiling Module Size


DIMENSIONS


F84

Border Type 2 (Snap-In) 1" Border

¼" ⅜" Nominal Face Size Nominal Face Size plus 1"




Diffs

DIMENSIONS

Border Type 3 (Lay-In or Tegular when duct size = module size - 2) (Lay-In shown)


Nominal Duct Size D D minus ⅛" ⅜"

2⅛"

⅜"



Border Type 3 (Lay-In or Tegular for other standard duct sizes) (Lay-In shown) Nominal Duct Size D



MODEL PDR - RETURN

D minus ⅛" 3"

⅜"

⅜" Ceiling Module Size minus 1/16"


Border Type 1 (Surface Mount) Nominal Face Size minus 1"

F


¼"

⅜"

⅜" Nominal Face Size Nominal Face Size plus 1"


DIMENSIONS


F85

Diffs

PAS FLUSH FACE - SUPPLY - STEEL - ADJUSTABLE

6" Dia. 12 x 12 Module


PERFORMANCE DATA

6x6 Neck

F

24 x 12 Module

6" Dia.

6x6 Neck

6" Dia.

F86

16 x 16 Module

PERFORMANCE DATA

6x6 Neck

8" Dia.

8x8 Neck

10" Dia.

Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw

300 0.006 59 0.016 1-2-7 1-2-5 1-2-5 1-2-3 75 0.017 1-2-8 1-2-6 1-3-5 1-2-4 59 0.016 1-2-7 1-2-5 1-2-5 1-2-3 75 0.017 1-2-8 1-2-6 1-3-5 1-2-4 59 0.016 1-2-8 1-2-6 1-2-5 1-2-4 75 0.017 1-3-9 1-3-6 1-3-5 1-2-4 105 0.018 1-3-10 1-3-8 2-3-6 1-2-5 133 0.019 2-4-12 2-4-9 2-4-7 1-3-6 164 0.020 2-4-13 2-4-10 2-4-8 1-3-6

400 0.010 79 0.028 2-4-10 2-4-7 2-3-6 1-2-5 100 0.029 2-4-11 2-4-8 2-3-7 1-3-5 79 0.028 2-4-10 2-4-7 2-3-6 1-2-5 100 0.029 2-4-11 2-4-8 2-3-7 1-3-5 79 0.028 2-4-10 2-4-8 2-3-6 2-2-5 100 0.029 2-5-12 2-4-9 2-4-7 2-3-6 140 0.032 3-6-14 3-5-10 3-4-9 2-3-7 178 0.034 12 3-7-16 3-6-11 3-5-10 2-4-7 218 0.036 14 3-7-17 3-6-13 4-5-11 3-4-8

500 0.016 98 0.044 2-6-12 2-4-9 3-4-8 2-3-6 125 0.046 13 3-6-14 3-5-10 3-4-9 2-3-7 98 0.044 2-6-12 2-4-9 3-4-8 2-3-6 125 0.046 13 3-6-14 3-5-10 3-4-9 2-3-7 98 0.044 3-7-13 3-5-10 3-4-8 2-3-6 125 0.046 13 3-7-15 3-5-11 3-5-9 2-3-7 175 0.049 16 4-9-17 4-6-13 4-5-11 3-4-8 222 0.052 19 5-10-20 5-7-14 4-6-12 3-5-9 273 0.056 21 5-11-22 5-8-16 4-7-13 3-5-10

600 0.022 118 0.064 16 4-7-15 4-5-11 3-5-9 2-3-7 150 0.066 19 4-8-17 4-6-12 3-5-10 3-4-8 118 0.064 16 4-7-15 4-5-11 3-5-9 2-3-7 150 0.066 19 4-8-17 4-6-12 3-5-10 3-4-8 118 0.064 16 4-8-15 4-6-11 3-5-10 2-4-7 150 0.066 19 5-9-17 4-6-13 4-5-11 3-4-8 209 0.071 22 6-10-20 5-8-15 4-6-13 3-5-10 267 0.075 25 7-12-23 6-9-17 5-7-15 4-6-11 327 0.080 27 7-13-26 6-10-19 5-8-16 4-6-12

700 800 1000 1200 1400 0.031 0.040 0.062 0.090 0.122 137 157 196 236 275 0.087 0.113 0.177 0.255 0.347 21 25 32 38 43 5-9-17 6-10-18 8-12-20 10-15-22 11-17-23 4-6-12 5-7-14 6-9-17 7-11-18 8-12-20 4-5-11 4-6-12 5-8-14 6-9-15 7-11-16 3-4-8 3-5-9 4-6-11 5-7-12 5-8-13 175 200 250 300 350 0.090 0.118 0.184 0.265 0.360 23 28 35 41 45 5-10-19 7-11-20 9-14-22 11-17-24 13-19-26 5-7-14 5-8-16 7-10-19 8-12-21 9-14-22 4-6-12 5-7-14 6-9-16 7-10-17 8-12-19 3-5-9 3-5-10 4-7-12 5-8-13 6-9-15 137 157 196 236 275 0.087 0.113 0.177 0.255 0.347 21 25 32 38 43 5-9-17 6-10-18 8-12-20 10-15-22 11-17-23 4-6-12 5-7-14 6-9-17 7-11-18 8-12-20 4-5-11 4-6-12 5-8-14 6-9-15 7-11-16 3-4-8 3-5-9 4-6-11 5-7-12 5-8-13 175 200 250 300 350 0.090 0.118 0.184 0.265 0.360 23 28 35 41 45 5-10-19 7-11-20 9-14-22 11-17-24 13-19-26 5-7-14 5-8-16 7-10-19 8-12-21 9-14-22 4-6-12 5-7-14 6-9-16 7-10-17 8-12-19 3-5-9 3-5-10 4-7-12 5-8-13 6-9-15 137 157 196 236 275 0.087 0.113 0.177 0.255 0.347 21 25 32 38 43 6-9-17 7-10-18 9-13-20 10-15-22 12-17-23 4-7-13 5-8-15 6-10-17 8-11-18 9-13-20 4-6-11 4-6-12 5-8-14 6-10-15 8-11-16 3-4-9 3-5-10 4-6-11 5-7-12 6-9-13 175 200 250 300 350 0.090 0.118 0.184 0.265 0.360 23 28 35 41 45 7-10-19 8-12-20 10-15-22 12-17-24 14-19-26 5-8-15 6-9-17 7-11-19 9-13-21 10-15-22 4-6-13 5-7-14 6-9-16 7-11-17 9-13-19 3-5-10 4-6-11 5-7-12 6-8-13 7-10-15 244 279 349 419 489 0.097 0.126 0.197 0.284 0.386 27 31 38 44 49 8-12-22 9-14-24 12-17-26 14-20-29 16-22-31 6-9-18 7-10-20 8-13-22 10-15-25 12-18-27 5-8-15 6-9-17 7-11-18 9-13-20 10-15-22 4-6-12 4-7-13 5-8-15 7-10-16 8-12-17 311 356 444 533 622 0.103 0.134 0.210 0.302 0.411 29 34 41 47 51 9-14-25 10-16-27 13-20-30 16-23-33 18-25-35 7-10-20 8-11-23 10-14-25 11-17-28 13-20-30 6-9-17 6-10-19 8-12-21 10-15-23 11-17-25 4-7-13 5-7-15 6-9-16 7-11-18 9-13-19 382 436 545 654 764 0.109 0.143 0.223 0.321 0.437 32 36 43 49 54 10-15-28 12-17-30 15-22-33 17-26-36 20-28-39 7-11-22 8-13-25 11-16-28 13-19-31 15-22-33 6-9-19 7-11-21 9-13-23 11-16-25 13-19-27 5-7-14 5-8-16 7-10-18 8-12-20 10-14-21


Diffs

PERFORMANCE DATA

20 x 20 Module

300 400 500 600 700 800 1000 1200 1400 0.006 0.010 0.016 0.022 0.031 0.040 0.062 0.090 0.122 59 79 98 118 137 157 196 236 275 0.016 0.028 0.044 0.064 0.087 0.113 0.177 0.255 0.347 16 21 25 32 38 43 1-2-8 2-4-10 3-7-13 4-8-15 6-9-17 7-10-18 9-13-20 10-15-22 12-17-23 1-2-6 2-4-8 3-5-10 4-6-11 4-7-13 5-8-15 6-10-17 8-11-18 9-13-20 1-2-5 2-3-6 3-4-8 3-5-10 4-6-11 4-6-12 5-8-14 6-10-15 8-11-16 1-2-4 2-2-5 2-3-6 2-4-7 3-4-9 3-5-10 4-6-11 5-7-12 6-9-13 75 100 125 150 175 200 250 300 350 0.017 0.029 0.046 0.066 0.090 0.118 0.184 0.265 0.360 13 19 23 28 35 41 45 1-3-9 2-5-12 3-7-15 5-9-17 7-10-19 8-12-20 10-15-22 12-17-24 14-19-26 1-3-6 2-4-9 3-5-11 4-6-13 5-8-15 6-9-17 7-11-19 9-13-21 10-15-22 1-3-5 2-4-7 3-5-9 4-5-11 4-6-13 5-7-14 6-9-16 7-11-17 9-13-19 1-2-4 2-3-6 2-3-7 3-4-8 3-5-10 4-6-11 5-7-12 6-8-13 7-10-15 105 140 175 209 244 279 349 419 489 0.018 0.032 0.049 0.071 0.097 0.126 0.197 0.284 0.386 16 22 27 31 38 44 49 1-3-10 3-6-14 4-9-17 6-10-20 8-12-22 9-14-24 12-17-26 14-20-29 16-22-31 1-3-8 3-5-10 4-6-13 5-8-15 6-9-18 7-10-20 8-13-22 10-15-25 12-18-27 2-3-6 3-4-9 4-5-11 4-6-13 5-8-15 6-9-17 7-11-18 9-13-20 10-15-22 1-2-5 2-3-7 3-4-8 3-5-10 4-6-12 4-7-13 5-8-15 7-10-16 8-12-17 133 178 222 267 311 356 444 533 622 0.019 0.034 0.052 0.075 0.103 0.134 0.210 0.302 0.411 12 19 25 29 34 41 47 51 2-4-12 3-7-16 5-10-20 7-12-23 9-14-25 10-16-27 13-20-30 16-23-33 18-25-35 2-4-9 3-6-11 5-7-14 6-9-17 7-10-20 8-11-23 10-14-25 11-17-28 13-20-30 2-4-7 3-5-10 4-6-12 5-7-15 6-9-17 6-10-19 8-12-21 10-15-23 11-17-25 1-3-6 2-4-7 3-5-9 4-6-11 4-7-13 5-7-15 6-9-16 7-11-18 9-13-19 164 218 273 327 382 436 545 654 764 0.020 0.036 0.056 0.080 0.109 0.143 0.223 0.321 0.437 14 21 27 32 36 43 49 54 2-4-13 3-7-17 5-11-22 7-13-26 10-15-28 12-17-30 15-22-33 17-26-36 20-28-39 2-4-10 3-6-13 5-8-16 6-10-19 7-11-22 8-13-25 11-16-28 13-19-31 15-22-33 2-4-8 4-5-11 4-7-13 5-8-16 6-9-19 7-11-21 9-13-23 11-16-25 13-19-27 1-3-6 3-4-8 3-5-10 4-6-12 5-7-14 5-8-16 7-10-18 8-12-20 10-14-21 208 278 347 417 486 556 694 833 972 0.022 0.039 0.061 0.087 0.119 0.155 0.243 0.349 0.476 16 23 29 34 38 45 51 56 2-5-15 4-8-20 6-12-25 8-15-29 11-17-31 13-20-33 16-25-37 20-29-41 23-31-44 2-5-11 4-7-14 6-9-18 7-11-21 8-13-25 10-14-28 12-18-32 14-21-35 17-25-37 2-5-9 4-6-12 5-8-15 6-9-18 7-11-21 8-12-23 10-15-26 12-18-29 14-21-31 2-3-7 3-5-9 4-6-12 5-7-14 5-8-16 6-9-18 8-12-20 9-14-22 11-16-24 236 314 393 471 550 628 785 942 1100 0.032 0.057 0.089 0.128 0.174 0.227 0.355 0.510 0.695 18 25 30 35 40 47 52 57 7-12-22 10-16-25 13-19-28 16-22-31 18-23-33 20-25-35 23-28-40 25-31-43 27-33-47 6-8-17 8-11-21 9-14-24 11-17-26 13-20-28 15-21-30 19-24-34 21-26-37 23-28-40 5-7-14 6-10-18 8-12-20 10-14-21 11-16-23 13-18-25 16-20-28 18-21-30 19-23-33 4-6-11 5-7-14 6-9-15 7-11-17 9-13-18 10-14-19 12-15-22 14-17-24 15-18-26 321 428 535 641 748 855 1069 1283 1497 0.034 0.060 0.093 0.135 0.183 0.239 0.374 0.538 0.733 12 21 28 34 38 43 50 56 60 8-14-25 12-18-29 15-23-33 18-25-36 21-27-39 24-29-41 27-33-46 29-36-51 32-39-55 7-10-20 9-13-25 11-17-28 13-20-30 15-23-33 18-25-35 22-28-39 25-30-43 27-33-47 6-8-17 7-11-20 9-14-23 11-17-25 13-19-27 15-20-29 19-23-32 20-25-35 22-27-38 4-6-13 6-9-16 7-11-18 9-13-20 10-15-21 11-16-23 14-18-25 16-20-28 17-21-30


F

PERFORMANCE DATA

Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 6" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 6x6 1-Way - Horizontal Throw Neck 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 8" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 8x8 1-Way - Horizontal Throw Neck 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 10" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 10 x 10 1-Way - Horizontal Throw Neck 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 12" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 14" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw


PAS FLUSH FACE - SUPPLY - STEEL - ADJUSTABLE

F87

Diffs


PERFORMANCE DATA PAS FLUSH FACE - SUPPLY - STEEL - ADJUSTABLE

6" Dia.

6x6 Neck

8" Dia.

F 24 x 24 Module

8x8 Neck

10" Dia.

10 x 10 Neck

PERFORMANCE DATA

12" Dia.

12 x 12 Neck

14" Dia.

16" Dia.

F88

Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw

300 0.006 59 0.016 1-2-8 1-2-6 1-2-5 1-2-4 75 0.017 1-3-9 1-3-6 1-3-5 1-2-4 105 0.018 1-3-10 1-3-8 2-3-6 1-2-5 133 0.019 2-4-12 2-4-9 2-4-7 1-3-6 164 0.020 2-4-13 2-4-10 2-4-8 1-3-6 208 0.022 2-5-15 2-5-11 2-5-9 2-3-7 236 0.032 7-12-22 6-8-17 5-7-14 4-6-11 300 0.033 8-13-24 6-10-19 5-8-16 4-6-12 321 0.034 12 8-14-25 7-10-20 6-8-17 4-6-13 419 0.036 14 10-16-29 8-11-23 6-10-19 5-7-15

400 0.010 79 0.028 2-4-10 2-4-8 2-3-6 2-2-5 100 0.029 2-5-12 2-4-9 2-4-7 2-3-6 140 0.032 3-6-14 3-5-10 3-4-9 2-3-7 178 0.034 12 3-7-16 3-6-11 3-5-10 2-4-7 218 0.036 14 3-7-17 3-6-13 4-5-11 3-4-8 278 0.039 16 4-8-20 4-7-14 4-6-12 3-5-9 314 0.057 18 10-16-25 8-11-21 6-10-18 5-7-14 400 0.059 20 12-18-28 9-13-24 7-11-20 6-8-16 428 0.060 21 12-18-29 9-13-25 7-11-20 6-9-16 559 0.063 23 14-21-33 10-15-28 9-13-23 7-10-18

500 0.016 98 0.044 3-7-13 3-5-10 3-4-8 2-3-6 125 0.046 13 3-7-15 3-5-11 3-5-9 2-3-7 175 0.049 16 4-9-17 4-6-13 4-5-11 3-4-8 222 0.052 19 5-10-20 5-7-14 4-6-12 3-5-9 273 0.056 21 5-11-22 5-8-16 4-7-13 3-5-10 347 0.061 23 6-12-25 6-9-18 5-8-15 4-6-12 393 0.089 25 13-19-28 9-14-24 8-12-20 6-9-15 500 0.092 27 15-22-32 11-16-27 9-14-22 7-10-17 535 0.093 28 15-23-33 11-17-28 9-14-23 7-11-18 698 0.099 31 17-26-37 13-19-32 11-16-26 8-12-21

600 0.022 118 0.064 16 4-8-15 4-6-11 3-5-10 2-4-7 150 0.066 19 5-9-17 4-6-13 4-5-11 3-4-8 209 0.071 22 6-10-20 5-8-15 4-6-13 3-5-10 267 0.075 25 7-12-23 6-9-17 5-7-15 4-6-11 327 0.080 27 7-13-26 6-10-19 5-8-16 4-6-12 417 0.087 29 8-15-29 7-11-21 6-9-18 5-7-14 471 0.128 30 16-22-31 11-17-26 10-14-21 7-11-17 600 0.133 33 18-24-35 13-19-29 11-16-24 8-12-19 641 0.135 34 18-25-36 13-20-30 11-17-25 9-13-20 838 0.143 36 21-29-41 15-23-35 13-19-29 10-15-23

700 0.031 137 0.087 21 6-9-17 4-7-13 4-6-11 3-4-9 175 0.090 23 7-10-19 5-8-15 4-6-13 3-5-10 244 0.097 27 8-12-22 6-9-18 5-8-15 4-6-12 311 0.103 29 9-14-25 7-10-20 6-9-17 4-7-13 382 0.109 32 10-15-28 7-11-22 6-9-19 5-7-14 486 0.119 34 11-17-31 8-13-25 7-11-21 5-8-16 550 0.174 35 18-23-33 13-20-28 11-16-23 9-13-18 700 0.181 38 20-26-37 15-22-32 13-19-26 10-15-21 748 0.183 38 21-27-39 15-23-33 13-19-27 10-15-21 977 0.194 41 24-31-44 18-26-38 15-22-31 11-17-24


800 0.040 157 0.113 25 7-10-18 5-8-15 4-6-12 3-5-10 200 0.118 28 8-12-20 6-9-17 5-7-14 4-6-11 279 0.126 31 9-14-24 7-10-20 6-9-17 4-7-13 356 0.134 34 10-16-27 8-11-23 6-10-19 5-7-15 436 0.143 36 12-17-30 8-13-25 7-11-21 5-8-16 556 0.155 38 13-20-33 10-14-28 8-12-23 6-9-18 628 0.227 40 20-25-35 15-21-30 13-18-25 10-14-19 800 0.236 42 23-28-40 17-24-34 14-20-28 11-16-22 855 0.239 43 24-29-41 18-25-35 15-20-29 11-16-23 1117 0.253 45 27-33-47 20-28-40 17-23-33 13-18-26

1000 0.062 196 0.177 32 9-13-20 6-10-17 5-8-14 4-6-11 250 0.184 35 10-15-22 7-11-19 6-9-16 5-7-12 349 0.197 38 12-17-26 8-13-22 7-11-18 5-8-15 444 0.210 41 13-20-30 10-14-25 8-12-21 6-9-16 545 0.223 43 15-22-33 11-16-28 9-13-23 7-10-18 694 0.243 45 16-25-37 12-18-32 10-15-26 8-12-20 785 0.355 47 23-28-40 19-24-34 16-20-28 12-15-22 1000 0.369 49 26-32-45 21-27-38 18-22-31 14-17-25 1069 0.374 50 27-33-46 22-28-39 19-23-32 14-18-25 1396 0.396 53 31-37-53 25-32-45 21-26-37 16-21-29

1200 0.090 236 0.255 38 10-15-22 8-11-18 6-10-15 5-7-12 300 0.265 41 12-17-24 9-13-21 7-11-17 6-8-13 419 0.284 44 14-20-29 10-15-25 9-13-20 7-10-16 533 0.302 47 16-23-33 11-17-28 10-15-23 7-11-18 654 0.321 49 17-26-36 13-19-31 11-16-25 8-12-20 833 0.349 51 20-29-41 14-21-35 12-18-29 9-14-22 942 0.510 52 25-31-43 21-26-37 18-21-30 14-17-24 1200 0.531 55 28-35-49 24-29-42 20-24-34 16-19-27 1283 0.538 56 29-36-51 25-30-43 20-25-35 16-20-28 1676 0.570 58 33-41-58 28-35-49 23-29-41 18-23-32

1400 0.122 275 0.347 43 12-17-23 9-13-20 8-11-16 6-9-13 350 0.360 45 14-19-26 10-15-22 9-13-19 7-10-15 489 0.386 49 16-22-31 12-18-27 10-15-22 8-12-17 622 0.411 51 18-25-35 13-20-30 11-17-25 9-13-19 764 0.437 54 20-28-39 15-22-33 13-19-27 10-14-21 972 0.476 56 23-31-44 17-25-37 14-21-31 11-16-24 1100 0.695 57 27-33-47 23-28-40 19-23-33 15-18-26 1400 0.723 60 31-37-53 26-32-45 21-26-37 17-21-29 1497 0.733 60 32-39-55 27-33-47 22-27-38 17-21-30 1955 0.776 63 36-44-63 31-38-53 25-31-44 20-24-34

Diffs

PERFORMANCE DATA

12 x 12 Module 24 x 12 Module 16 x 16 Module

300 0.006 59 0.014 1-2-7 1-2-5 1-2-5 1-2-3 75 0.015 1-2-8 1-2-6 1-3-5 1-2-4 59 0.014 1-2-7 1-2-5 1-2-5 1-2-3 75 0.015 1-2-8 1-2-6 1-3-5 1-2-4 59 0.014 1-2-8 1-2-6 1-2-5 1-2-4 75 0.015 1-3-9 1-3-6 1-3-5 1-2-4 105 0.016 1-3-10 1-3-8 2-3-6 1-2-5 133 0.017 2-4-12 2-4-9 2-4-7 1-3-6 164 0.018 2-4-13 2-4-10 2-4-8 1-3-6

400 0.010 79 0.025 2-4-10 2-4-7 2-3-6 1-2-5 100 0.026 2-4-11 2-4-8 2-3-7 1-3-5 79 0.025 2-4-10 2-4-7 2-3-6 1-2-5 100 0.026 2-4-11 2-4-8 2-3-7 1-3-5 79 0.025 2-4-10 2-4-8 2-3-6 2-2-5 100 0.026 2-5-12 2-4-9 2-4-7 2-3-6 140 0.028 3-6-14 3-5-10 3-4-9 2-3-7 178 0.030 3-7-16 3-6-11 3-5-10 2-4-7 218 0.032 3-7-17 3-6-13 4-5-11 3-4-8

500 0.016 98 0.039 2-6-12 2-4-9 3-4-8 2-3-6 125 0.041 3-6-14 3-5-10 3-4-9 2-3-7 98 0.039 2-6-12 2-4-9 3-4-8 2-3-6 125 0.041 3-6-14 3-5-10 3-4-9 2-3-7 98 0.039 3-7-12 3-5-10 3-4-8 2-3-6 125 0.041 3-7-14 3-5-11 3-5-9 2-3-7 175 0.044 13 4-9-16 4-6-13 4-5-10 3-4-8 222 0.047 16 5-10-18 5-7-14 4-6-12 3-5-9 273 0.051 18 5-11-20 5-8-16 4-7-13 3-5-10

600 700 800 0.022 0.031 0.040 118 137 157 0.056 0.077 0.100 13 18 22 4-7-13 5-9-14 6-10-15 4-5-11 4-6-12 5-7-13 3-5-9 4-5-9 4-6-10 2-3-7 3-4-8 3-5-8 150 175 200 0.059 0.080 0.105 16 21 25 4-8-15 5-10-16 7-11-17 4-6-12 5-7-14 5-8-15 3-5-10 4-6-10 5-7-11 3-4-8 3-5-9 3-5-9 118 137 157 0.056 0.077 0.100 13 18 22 4-7-13 5-9-14 6-10-15 4-5-11 4-6-12 5-7-13 3-5-9 4-5-9 4-6-10 2-3-7 3-4-8 3-5-8 150 175 200 0.059 0.080 0.105 16 21 25 4-8-15 5-10-16 7-11-17 4-6-12 5-7-14 5-8-15 3-5-10 4-6-10 5-7-11 3-4-8 3-5-9 3-5-9 118 137 157 0.056 0.077 0.100 13 18 22 4-8-13 6-9-14 7-10-15 4-6-11 4-7-13 5-8-13 3-5-9 4-6-9 4-6-10 2-4-7 3-4-8 3-5-8 150 175 200 0.059 0.080 0.105 16 21 25 5-9-15 7-10-16 8-12-17 4-6-13 5-8-14 6-9-15 4-5-10 4-6-10 5-7-11 3-4-8 3-5-9 4-6-9 209 244 279 0.064 0.087 0.113 19 24 28 6-10-18 8-12-19 9-14-20 5-8-15 6-9-17 7-10-18 4-6-11 5-8-12 6-9-13 3-5-9 4-6-10 4-7-11 267 311 356 0.068 0.093 0.121 22 27 31 7-12-20 9-14-21 10-16-23 6-9-17 7-10-19 8-11-20 5-7-13 6-9-14 6-10-15 4-6-11 4-7-11 5-7-12 327 382 436 0.073 0.099 0.130 24 29 33 7-13-22 10-15-24 12-17-25 6-10-19 7-11-21 8-13-22 5-8-14 6-9-15 7-11-17 4-6-12 5-7-13 5-8-14


1000 0.062 196 0.157 30 8-12-17 6-9-15 5-8-11 4-6-9 250 0.164 32 9-14-19 7-10-17 6-9-13 4-7-10 196 0.157 30 8-12-17 6-9-15 5-8-11 4-6-9 250 0.164 32 9-14-19 7-10-17 6-9-13 4-7-10 196 0.157 30 9-12-17 6-10-15 5-8-11 4-6-9 250 0.164 32 10-14-19 7-11-17 6-9-13 5-7-10 349 0.177 35 12-16-23 8-13-20 7-10-15 5-8-12 444 0.190 38 13-18-26 10-14-23 8-12-17 6-9-14 545 0.203 40 15-20-28 11-16-25 9-13-18 7-10-15

1200 0.090 236 0.226 35 10-13-19 7-11-16 6-9-12 5-7-10 300 0.236 38 11-15-21 8-12-19 7-10-14 5-8-11 236 0.226 35 10-13-19 7-11-16 6-9-12 5-7-10 300 0.236 38 11-15-21 8-12-19 7-10-14 5-8-11 236 0.226 35 10-13-19 8-11-16 6-9-12 5-7-10 300 0.236 38 12-15-21 9-13-19 7-10-14 6-8-11 419 0.255 41 14-18-25 10-15-22 9-11-16 7-9-13 533 0.273 44 16-20-28 11-17-25 10-13-18 7-11-15 654 0.292 46 17-22-31 13-19-27 11-14-20 8-12-17

1400 0.122 275 0.307 40 11-14-20 8-12-18 7-9-13 5-8-11 350 0.321 43 13-16-23 9-14-20 8-10-15 6-9-12 275 0.307 40 11-14-20 8-12-18 7-9-13 5-8-11 350 0.321 43 13-16-23 9-14-20 8-10-15 6-9-12 275 0.307 40 12-14-20 9-13-18 8-9-13 6-8-11 350 0.321 43 13-16-23 10-14-20 9-10-15 7-9-12 489 0.347 46 16-19-27 12-17-24 10-12-18 8-10-14 622 0.372 49 18-21-30 13-19-27 11-14-20 9-11-16 764 0.398 51 19-24-34 15-21-30 13-15-22 10-13-18

F

PERFORMANCE DATA

Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 6" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 6x6 1-Way - Horizontal Throw Neck 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 6" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 6x6 1-Way - Horizontal Throw Neck 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 6" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 6x6 1-Way - Horizontal Throw Neck 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 8" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 8x8 1-Way - Horizontal Throw Neck 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 10" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw


PDS DROP FACE - SUPPLY - STEEL - ADJUSTABLE

F89

Diffs

PERFORMANCE DATA

F

F90


20 x 20 Module


PERFORMANCE DATA Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 6" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 6x6 1-Way - Horizontal Throw Neck 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 8" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 8x8 1-Way - Horizontal Throw Neck 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 10" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 10 x 10 1-Way - Horizontal Throw Neck 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 12" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 14" Dia. 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw

300 400 500 600 700 800 1000 1200 1400 0.006 0.010 0.016 0.022 0.031 0.040 0.062 0.090 0.122 59 79 98 118 137 157 196 236 275 0.014 0.025 0.039 0.056 0.077 0.100 0.157 0.226 0.307 13 18 22 30 35 40 1-2-8 2-4-10 3-7-12 4-8-13 6-9-14 7-10-15 9-12-17 10-13-19 12-14-20 1-2-6 2-4-8 3-5-10 4-6-11 4-7-13 5-8-13 6-10-15 8-11-16 9-13-18 1-2-5 2-3-6 3-4-8 3-5-9 4-6-9 4-6-10 5-8-11 6-9-12 8-9-13 1-2-4 2-2-5 2-3-6 2-4-7 3-4-8 3-5-8 4-6-9 5-7-10 6-8-11 75 100 125 150 175 200 250 300 350 0.015 0.026 0.041 0.059 0.080 0.105 0.164 0.236 0.321 16 21 25 32 38 43 1-3-9 2-5-12 3-7-14 5-9-15 7-10-16 8-12-17 10-14-19 12-15-21 13-16-23 1-3-6 2-4-9 3-5-11 4-6-13 5-8-14 6-9-15 7-11-17 9-13-19 10-14-20 1-3-5 2-4-7 3-5-9 4-5-10 4-6-10 5-7-11 6-9-13 7-10-14 9-10-15 1-2-4 2-3-6 2-3-7 3-4-8 3-5-9 4-6-9 5-7-10 6-8-11 7-9-12 105 140 175 209 244 279 349 419 489 0.016 0.028 0.044 0.064 0.087 0.113 0.177 0.255 0.347 13 19 24 28 35 41 46 1-3-10 3-6-14 4-9-16 6-10-18 8-12-19 9-14-20 12-16-23 14-18-25 16-19-27 1-3-8 3-5-10 4-6-13 5-8-15 6-9-17 7-10-18 8-13-20 10-15-22 12-17-24 2-3-6 3-4-9 4-5-10 4-6-11 5-8-12 6-9-13 7-10-15 9-11-16 10-12-18 1-2-5 2-3-7 3-4-8 3-5-9 4-6-10 4-7-11 5-8-12 7-9-13 8-10-14 133 178 222 267 311 356 444 533 622 0.017 0.030 0.047 0.068 0.093 0.121 0.190 0.273 0.372 16 22 27 31 38 44 49 2-4-12 3-7-16 5-10-18 7-12-20 9-14-21 10-16-23 13-18-26 16-20-28 18-21-30 2-4-9 3-6-11 5-7-14 6-9-17 7-10-19 8-11-20 10-14-23 11-17-25 13-19-27 2-4-7 3-5-10 4-6-12 5-7-13 6-9-14 6-10-15 8-12-17 10-13-18 11-14-20 1-3-6 2-4-7 3-5-9 4-6-11 4-7-11 5-7-12 6-9-14 7-11-15 9-11-16 164 218 273 327 382 436 545 654 764 0.018 0.032 0.051 0.073 0.099 0.130 0.203 0.292 0.398 18 24 29 33 40 46 51 2-4-13 3-7-17 5-11-20 7-13-22 10-15-24 12-17-25 15-20-28 17-22-31 19-24-34 2-4-10 3-6-13 5-8-16 6-10-19 7-11-21 8-13-22 11-16-25 13-19-27 15-21-30 2-4-8 4-5-11 4-7-13 5-8-14 6-9-15 7-11-17 9-13-18 11-14-20 13-15-22 1-3-6 3-4-8 3-5-10 4-6-12 5-7-13 5-8-14 7-10-15 8-12-17 10-13-18 208 278 347 417 486 556 694 833 972 0.020 0.036 0.056 0.080 0.109 0.143 0.223 0.321 0.437 13 21 26 31 35 43 48 53 2-5-15 4-8-20 6-12-23 8-15-25 11-17-27 13-20-29 16-23-32 20-25-35 22-27-38 2-5-11 4-7-14 6-9-18 7-11-21 8-13-24 10-14-25 12-18-28 14-21-31 17-24-34 2-5-9 4-6-12 5-8-15 6-9-16 7-11-17 8-12-19 10-15-21 12-16-23 14-17-25 2-3-7 3-5-9 4-6-12 5-7-13 5-8-14 6-9-15 8-12-17 9-13-19 11-14-20 236 314 393 471 550 628 785 942 1100 0.027 0.048 0.076 0.109 0.148 0.194 0.303 0.436 0.593 15 22 28 33 37 44 50 55 7-12-19 10-15-22 13-17-24 15-19-26 16-20-29 18-22-30 20-24-34 22-26-37 23-29-40 6-8-16 8-11-19 9-14-21 11-16-23 13-18-25 15-19-27 17-21-30 19-23-33 21-25-36 5-7-12 6-10-14 8-11-16 10-12-17 11-13-19 11-14-20 13-16-22 14-17-24 15-19-26 4-6-10 5-7-12 6-9-13 7-10-14 9-11-15 9-12-16 11-13-18 12-14-20 12-15-22 321 428 535 641 748 855 1069 1283 1497 0.029 0.052 0.081 0.116 0.158 0.206 0.322 0.464 0.631 18 25 31 36 40 47 53 58 8-14-22 12-18-25 15-20-28 18-22-31 19-24-33 21-25-36 23-28-40 25-31-44 27-33-47 7-10-19 9-13-22 11-17-25 13-19-27 15-21-29 18-22-31 20-25-35 22-27-38 24-29-42 6-8-14 7-11-16 9-13-18 11-14-20 13-15-22 13-16-23 15-18-26 16-20-28 18-22-31 4-6-12 6-9-13 7-11-15 9-12-16 10-13-18 11-13-19 12-15-21 13-16-23 15-18-25


Diffs

PERFORMANCE DATA

6" Dia.

6x6 Neck

8" Dia.

24 x 24 Module

8x8 Neck

10" Dia.

10 x 10 Neck

12" Dia.

14" Dia.

16" Dia.

700 0.031 137 0.077 18 6-9-14 4-7-13 4-6-9 3-4-8 175 0.080 21 7-10-16 5-8-14 4-6-10 3-5-9 244 0.087 24 8-12-19 6-9-17 5-8-12 4-6-10 311 0.093 27 9-14-21 7-10-19 6-9-14 4-7-11 382 0.099 29 10-15-24 7-11-21 6-9-15 5-7-13 486 0.109 31 11-17-27 8-13-24 7-11-17 5-8-14 550 0.148 33 16-20-29 13-18-25 11-13-19 9-11-15 700 0.156 35 19-23-32 15-20-28 12-15-21 10-12-17 748 0.158 36 19-24-33 15-21-29 13-15-22 10-13-18 977 0.169 38 22-27-38 18-24-34 14-18-25 11-14-20


800 0.040 157 0.100 22 7-10-15 5-8-13 4-6-10 3-5-8 200 0.105 25 8-12-17 6-9-15 5-7-11 4-6-9 279 0.113 28 9-14-20 7-10-18 6-9-13 4-7-11 356 0.121 31 10-16-23 8-11-20 6-10-15 5-7-12 436 0.130 33 12-17-25 8-13-22 7-11-17 5-8-14 556 0.143 35 13-20-29 10-14-25 8-12-19 6-9-15 628 0.194 37 18-22-30 15-19-27 11-14-20 9-12-16 800 0.203 39 20-24-34 17-21-30 13-16-22 11-13-18 855 0.206 40 21-25-36 18-22-31 13-16-23 11-13-19 1117 0.220 43 23-29-41 20-25-36 15-19-26 13-15-22

1000 0.062 196 0.157 30 9-12-17 6-10-15 5-8-11 4-6-9 250 0.164 32 10-14-19 7-11-17 6-9-13 5-7-10 349 0.177 35 12-16-23 8-13-20 7-10-15 5-8-12 444 0.190 38 13-18-26 10-14-23 8-12-17 6-9-14 545 0.203 40 15-20-28 11-16-25 9-13-18 7-10-15 694 0.223 43 16-23-32 12-18-28 10-15-21 8-12-17 785 0.303 44 20-24-34 17-21-30 13-16-22 11-13-18 1000 0.317 46 22-27-38 20-24-34 14-18-25 12-15-21 1069 0.322 47 23-28-40 20-25-35 15-18-26 12-15-21 1396 0.344 50 26-32-45 23-28-40 17-21-30 14-17-24

1200 0.090 236 0.226 35 10-13-19 8-11-16 6-9-12 5-7-10 300 0.236 38 12-15-21 9-13-19 7-10-14 6-8-11 419 0.255 41 14-18-25 10-15-22 9-11-16 7-9-13 533 0.273 44 16-20-28 11-17-25 10-13-18 7-11-15 654 0.292 46 17-22-31 13-19-27 11-14-20 8-12-17 833 0.321 48 20-25-35 14-21-31 12-16-23 9-13-19 942 0.436 50 22-26-37 19-23-33 14-17-24 12-14-20 1200 0.457 52 24-30-42 21-26-37 16-19-27 13-16-23 1283 0.464 53 25-31-44 22-27-38 16-20-28 13-16-23 1676 0.496 56 29-35-50 25-31-44 19-23-32 15-19-27

1400 0.122 275 0.307 40 12-14-20 9-13-18 8-9-13 6-8-11 350 0.321 43 13-16-23 10-14-20 9-10-15 7-9-12 489 0.347 46 16-19-27 12-17-24 10-12-18 8-10-14 622 0.372 49 18-21-30 13-19-27 11-14-20 9-11-16 764 0.398 51 19-24-34 15-21-30 13-15-22 10-13-18 972 0.437 53 22-27-38 17-24-34 14-17-25 11-14-20 1100 0.593 55 23-29-40 21-25-36 15-19-26 12-15-22 1400 0.622 57 26-32-46 23-28-40 17-21-30 14-17-24 1497 0.631 58 27-33-47 24-29-42 18-22-31 15-18-25 1955 0.675 60 31-38-54 27-34-48 20-25-35 17-20-29

F

PERFORMANCE DATA

12 x 12 Neck

Neck Velocity 300 400 500 600 Velocity Pressure 0.006 0.010 0.016 0.022 Airflow, cfm 59 79 98 118 Total Pressure 0.014 0.025 0.039 0.056 NC (Noise Criteria) 13 1-Way - Horizontal Throw 1-2-8 2-4-10 3-7-12 4-8-13 2-Way - Horizontal Throw 1-2-6 2-4-8 3-5-10 4-6-11 3-Way - Horizontal Throw 1-2-5 2-3-6 3-4-8 3-5-9 4-Way - Horizontal Throw 1-2-4 2-2-5 2-3-6 2-4-7 Airflow, cfm 75 100 125 150 Total Pressure 0.015 0.026 0.041 0.059 NC (Noise Criteria) 16 1-Way - Horizontal Throw 1-3-9 2-5-12 3-7-14 5-9-15 2-Way - Horizontal Throw 1-3-6 2-4-9 3-5-11 4-6-13 3-Way - Horizontal Throw 1-3-5 2-4-7 3-5-9 4-5-10 4-Way - Horizontal Throw 1-2-4 2-3-6 2-3-7 3-4-8 Airflow, cfm 105 140 175 209 Total Pressure 0.016 0.028 0.044 0.064 NC (Noise Criteria) 13 19 1-Way - Horizontal Throw 1-3-10 3-6-14 4-9-16 6-10-18 2-Way - Horizontal Throw 1-3-8 3-5-10 4-6-13 5-8-15 3-Way - Horizontal Throw 2-3-6 3-4-9 4-5-10 4-6-11 4-Way - Horizontal Throw 1-2-5 2-3-7 3-4-8 3-5-9 Airflow, cfm 133 178 222 267 Total Pressure 0.017 0.030 0.047 0.068 NC (Noise Criteria) 16 22 1-Way - Horizontal Throw 2-4-12 3-7-16 5-10-18 7-12-20 2-Way - Horizontal Throw 2-4-9 3-6-11 5-7-14 6-9-17 3-Way - Horizontal Throw 2-4-7 3-5-10 4-6-12 5-7-13 4-Way - Horizontal Throw 1-3-6 2-4-7 3-5-9 4-6-11 Airflow, cfm 164 218 273 327 Total Pressure 0.018 0.032 0.051 0.073 NC (Noise Criteria) 18 24 1-Way - Horizontal Throw 2-4-13 3-7-17 5-11-20 7-13-22 2-Way - Horizontal Throw 2-4-10 3-6-13 5-8-16 6-10-19 3-Way - Horizontal Throw 2-4-8 4-5-11 4-7-13 5-8-14 4-Way - Horizontal Throw 1-3-6 3-4-8 3-5-10 4-6-12 Airflow, cfm 208 278 347 417 Total Pressure 0.020 0.036 0.056 0.080 NC (Noise Criteria) 13 21 26 1-Way - Horizontal Throw 2-5-15 4-8-20 6-12-23 8-15-25 2-Way - Horizontal Throw 2-5-11 4-7-14 6-9-18 7-11-21 3-Way - Horizontal Throw 2-5-9 4-6-12 5-8-15 6-9-16 4-Way - Horizontal Throw 2-3-7 3-5-9 4-6-12 5-7-13 Airflow, cfm 236 314 393 471 Total Pressure 0.027 0.048 0.076 0.109 NC (Noise Criteria) 15 22 28 1-Way - Horizontal Throw 7-12-19 10-15-22 13-17-24 15-19-26 2-Way - Horizontal Throw 6-8-16 8-11-19 9-14-21 11-16-23 3-Way - Horizontal Throw 5-7-12 6-10-14 8-11-16 10-12-17 4-Way - Horizontal Throw 4-6-10 5-7-12 6-9-13 7-10-14 Airflow, cfm 300 400 500 600 Total Pressure 0.029 0.051 0.079 0.114 NC (Noise Criteria) 17 24 30 1-Way - Horizontal Throw 8-13-21 12-17-24 15-19-27 17-21-30 2-Way - Horizontal Throw 6-10-19 9-13-21 11-16-24 13-19-26 3-Way - Horizontal Throw 5-8-14 7-11-16 9-13-18 11-14-19 4-Way - Horizontal Throw 4-6-11 6-8-13 7-10-15 8-11-16 Airflow, cfm 321 428 535 641 Total Pressure 0.029 0.052 0.081 0.116 NC (Noise Criteria) 18 25 31 1-Way - Horizontal Throw 8-14-22 12-18-25 15-20-28 18-22-31 2-Way - Horizontal Throw 7-10-19 9-13-22 11-17-25 13-19-27 3-Way - Horizontal Throw 6-8-14 7-11-16 9-13-18 11-14-20 4-Way - Horizontal Throw 4-6-12 6-9-13 7-11-15 9-12-16 Airflow, cfm 419 559 698 838 Total Pressure 0.031 0.055 0.086 0.124 NC (Noise Criteria) 12 21 28 34 1-Way - Horizontal Throw 10-16-25 14-20-29 17-23-32 20-25-35 2-Way - Horizontal Throw 8-11-22 10-15-25 13-19-28 15-22-31 3-Way - Horizontal Throw 6-10-16 9-13-19 11-15-21 13-16-23 4-Way - Horizontal Throw 5-7-13 7-10-15 8-12-17 10-13-19



F91

Diffs


PERFORMANCE DATA • Data obtained from tests conducted in accordance with ANSI / ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. • For an explanation of catalog throw data, see the section, Engineering Guidelines.

• NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB. • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts. • Dash (-) in space denotes an NC value of less than 10. • All pressures are given in inches of water. • To obtain static pressure, subtract the velocity pressure from the total pressure.

PAR, PXP, PMR, PXP-DR, PDR PERFORMANCE DATA PAR, PXP, PMR - FLUSH FACE - RETURN; PXP-DR, PDR - DROP FACE - RETURN Neck Size 12 x 12 Face

6 Dia. * 6 x 6 Neck * 10 x 10 Neck

F

Neck Size 6 Dia. * 6 x 6 Neck * 8 Dia. * 8 x 8 Neck * 10 Dia.* 24 x 24 10 x 10 Neck * Face 12 Dia. * 12 x 12 Neck * 14 Dia. * 15 x 15 Neck * 16 Dia. * 18 x 18 Neck *

300 0.01 0.03 59 75 208 15 300 0.01 0.03 59 75 105 133 164 208 235 300 320 469 419 11 675 11 1008 13 300 0.01 0.03 458 408 675 2108 12

PERFORMANCE DATA

22 x 22 Neck

Neck Vel, fpm Vp, in. Wg Ps (-), in. Wg Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Neck Vel, fpm Vp, in. Wg Ps (-), in. Wg Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Neck Vel, fpm Vp, in. Wg Ps (-), in. Wg Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC

PAR, PXP, PMR, PXP-DR, PDR PERFORMANCE NOTES

F92

• Supply unit with deflectors removed. • Static pressures are negative, in inches of water, measured per ANSI/ASHRAE Standard 70-2006. • Noise Criteria (NC) based on a room absorption of 10 dB, re 10-12 watts, measured per ANSI/ASHRAE Standard 70-2006.

Neck Size Other Sizes

10 x 22 (12 x 24 Face) 14 x 14 (16 x 16 Face) 18 x 18 (20 x 20 Face) 22 x 46 (24 x 48 Face)

400 0.01 0.06 78 100 278 23 400 0.01 0.06 78 100 140 178 218 278 11 314 12 400 14 427 15 625 16 558 18 900 18 1344 20 400 0.01 0.06 611 544 900 11 2811 20

500 0.02 0.09 98 125 12 347 29 500 0.02 0.09 98 125 174 13 222 14 273 16 347 17 392 17 500 20 534 21 781 22 698 24 1125 24 1681 26 500 0.02 0.09 764 681 12 1125 17 3514 25

600 0.02 0.13 118 14 150 17 417 33 600 0.02 0.13 118 13 150 14 209 17 267 18 327 20 417 21 471 22 600 24 641 25 938 26 837 28 1350 28 2017 30 600 0.02 0.13 917 14 817 17 1350 22 4217 30

700 0.03 0.17 137 18 175 21 486 37 700 0.03 0.18 137 17 175 18 244 21 311 22 382 24 486 25 549 26 700 28 748 29 1094 30 977 32 1575 32 2353 34 700 0.03 0.17 1069 18 953 21 1575 26 4919 34

800 0.04 0.23 157 21 200 24 556 41 800 0.04 0.24 157 20 200 21 279 24 356 25 436 27 556 28 628 29 800 31 855 32 1250 33 1116 35 1800 36 2689 37 800 0.04 0.23 1222 21 1089 24 1800 29 5622 38

1000 0.06 0.36 196 27 250 30 694 47 1000 0.06 0.37 196 26 250 27 349 30 444 31 545 33 694 34 785 34 1000 37 1068 38 1563 39 1395 41 2250 41 3361 43 1000 0.06 0.36 1528 27 1361 30 2250 35 7028 43

1200 0.09 0.51 235 32 300 35 833 51 1200 0.09 0.54 235 31 300 32 419 35 533 36 654 38 833 39 942 39 1200 42 1282 43 1875 44 1674 46 2700 46 4033 47 1200 0.09 0.51 1833 32 1633 35 2700 40 8433 48

1400 0.12 0.70 275 36 350 39 972 55 1400 0.12 0.73 275 34 350 35 488 38 622 39 763 41 972 42 1099 43 1400 45 1495 46 2188 47 1953 49 3150 49 4706 51 1400 0.12 0.70 2139 36 1906 39 3150 44 9839 52

• These products have been tested per ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. • See the section, Engineering Guidelines for additional information.

Diffs


Available Steel Models: PAS • Supply • Flush Face PDS • Supply • Drop Face PAR • Return • Flush Face PDR • Return • Drop Face Available Aluminum Models: PAS-AA • Supply • Flush Face PAR-AA • Return • Flush Face

Diffs must discharge a uniform horizontal blanket of air into the room and protect ceiling against smudging. Pattern controllers in the supply models shall be mounted on the back of the perforated face and must be field adjustable to allow the discharged air to enter the room in either vertical or one-, two-, three- or four-way horizontal jets. The perforated face must be easily unlatchable from the backpan to facilitate option of the face for pattern controller adjustment or to access an optional damper.

Perforated ceiling diffs shall be Titus models PAS (steel, flush face), PDS (steel, drop face), or PAS-AA (aluminum, flush face), for supply and PAR (steel, flush face), PDR (steel, drop face), or PAR-AA (aluminum, flush face) for return. The return models shall have the same face and border construction as the supply models for

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff by unlatching the diff face. The diff must be designed such that complete removal of the face is not required during damper adjustment. The manufacturer shall provide published performance data for the perforated diff. The diff shall be tested in accordance with ANSI/ ASHRAE Standard 70-2006.



harmonious appearance in the room. Diffs shall have a perforated face with 3/16-inch diameter holes on ¼-inch staggered centers and no less than 51 percent free area. Perforated face shall be steel or aluminum according to the model selected. The backpan shall be one piece stamped heavy gauge steel of the sizes and mounting types shown on the plans and outlet schedule. The diff neck shall have 1⅛-inch depth for easy duct connection.


F

Accessories

Model PAS PDS

Supply, Flush Face Supply, Drop Face

XXX

XX x XX

Neck Size 6, 8, 10, 12, 14, 16, 6x6, 8x8, 10x10, 12x12, 15x15, 18x18, 18x6

Module Size 12x12, 16x16, 20x20, 24x12, 24x24, 48x24 XX x XX Border

Surface Mount Snap-In Lay-In Spline Spline, Sliding Lock

Finish 01 Aluminum 26 White 84 Black XXX

XX

1 2 3 4 4SL

XX-XXX D-100 AG-100 D-75 AG-75 AG-65 AG-85 AG-95 AG-35B

Note 1: See damper model for size availability. Note 2: Available on PAS 24”x24” full-face Border 3.

Equalizing Grid, Round EG Equalizing Grid, Long EGL Equalizing Grid, Short EGS Earthquake Tabs EQT Insulation Blanket IB (note 2)

XXX Optional Damper (note 1) Radial, Round Neck Radial, Round Neck Opposed Blade, Round Neck Opposed Blade, Round Neck Combination, Round Neck Butterfly, Round Neck Opposed Blade, Rect. Neck Opposed Blade, Rect. Duct

Accessories

Return, Flush Face Return, Drop Face

XXX Neck Size

XX x XX 6, 8, 10, 12, 14, 16, 6x6, 8x8, 10x10, 12x12, 15x15, 18x18, 18x6, 22x10, 22x22, 46x22

Module Size 12x12, 16x16, 20x20, 24x12, 24x24, 48x24 XX x XX Border


Note 1: See damper model for size availability. Note 2: Available on PAS 24”x24” full-face Border 3.

Finish 01 Aluminum 26 White XXX 1 2 3 4 4SL

XX



SPECIFICATIONS

Model PAR PDR


F93

Diffs



Accessories

Model

Module Size 12x12 24x24

Aluminum, Supply, Flush Face

PAS-AA

XX x XX

Neck Size 6, 8, 10, 12, 14, 16, 6x6, 8x8, 10x10, 12x12, 15x15, 18x18

XX x XX Border


Finish 01 26 XXX

XX

1 2 3 4 4SL

Aluminum White

XX-XXX D-100 AG-100 D-75 AG-75 AG-65 AG-85 AG-95 AG-35B AG-95-AA AG-35B-AA

Note 1: See damper model for size availability. Note 2: Available on PAS-AA 24”x24” full-face Border 3.

F Module Size 12x12 24x24

Aluminum, Return, Flush Face

PAR-AA Neck Size

XX x XX 6, 8, 10, 12, 14, 16, 6x6, 8x8, 10x10, 12x12, 15x15, 18x18, 22x22

XX x XX Border


Finish 01 Aluminum 26 White XXX 1 2 3 4 4SL

XX

Optional Damper (note 1) Radial, Round Neck Radial, Round Neck Opposed Blade, Round Neck Opposed Blade, Round Neck Combination, Round Neck Butterfly, Round Neck Opposed Blade, Rect. Neck, Neck Mounted Opposed Blade, Rect. Duct, Duct Mounted Opposed Blade, Rect. Neck, Neck Mounted, Aluminum Opposed Blade, Rect. Duct, Duct Mounted, Aluminum

D-100 AG-100 D-75 AG-75 AG-65 AG-85 AG-95

AG-95-AA Note 1: See damper model for size availability. Note 2: Available on PAS 24”x24” full-face Border 3.


XX-XXX

AG-35B

SPECIFICATIONS

XXX

Accessories

Model

F94


AG-35B-AA

XXX Optional Damper (note 1) Radial, Round Neck Radial, Round Neck Opposed Blade, Round Neck Opposed Blade, Round Neck Combination, Round Neck Butterfly, Round Neck Opposed Blade, Rect. Neck, Neck Mounted Opposed Blade, Rect. Duct, Duct Mounted Opposed Blade, Rect. Neck, Neck Mounted, Aluminum Opposed Blade, Rect. Duct, Duct Mounted, Aluminum

Diffs

Perforated Ceiling Diffs (continued)

Available Steel Models: PXP • Return • Flush Face PXP-DF • Return • Drop Face Available Aluminum Model: PXP-AA • Return • Flush Face Products Include: • Standard Finish - #26 White. For Performance Data and notes, please refer to the PAR, PXP, PMR, PXP-DR, PDR table on page F92.

• Model PXP Series perforated s are designed for return or exhaust applications. • s match Models PAS, PDS, and PAS-AA supply diffs in appearance after installation. • Installed by laying between T-bars. • Perforated has 3/16-inch diameter holes on ¼-inch staggered centers. • Material is heavy gauge steel or aluminum.


RETURN S

PXP, PXP-DF, & PXP-AA

PXP, PXP-DF, PXP-AA

• MRI compatible (PXP-AA).

F

Model PXP and PXP-AA (Lay-In)

½"

Celing Module minus ¼" Celing Module Size Ceiling Module Sizes Available: 12 x 12, 16 x 16, 20 x 20, 24 x 12, 24 x 24, 48 x 24

3

Celing Module minus ¼" Celing Module Size

/8"

PXP, PXP-DF, & PXP-AA

Model PXP-DF (Lay-In or Tegular) (Lay-In shown)

Ceiling Module Sizes Available: 12 x 12, 16 x 16, 20 x 20, 24 x 12, 24 x 24, 48 x 24


F95

Diffs



F

PERFORATED CEILING DIFFS RETURN Available Steel Models: PXP • Return • Flush Face PXP-DF • Return • Drop Face

Perforated ceiling s for return applications shall be Titus models PXP (steel, flush face), PXP-DF (steel, drop face), or PXP-AA (aluminum, flush face). Perforated face s shall have 3/16-inch diameter holes on ¼-inch staggered centers and no less than 51 percent free

MODEL NUMBER SPECIFICATION Model - Return Flush Face, Steel PXP PXP-AA Flush Face, Aluminum PXP-DF Drop Face, Steel XX x XX

Module Size 12x12, 16x16, 20x20, 24x12, 24x24, 48x24

SPECIFICATIONS

The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering, or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied.

Available Aluminum Model: PXP-AA • Return • Flush Face

XXX-XX

F96

area. The return s must match Titus supply models in appearance and shall be provided in the sizes and mounting type shown on the plans and outlet schedule. The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H.

Finish 01 26

Aluminum White

XX

XXX

Accessories Earthquake Tabs

EQT

The manufacturer shall provide published performance data for the perforated return s. The s shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

Diffs


• Pressure drop and noise levels are lower than typical curved blade perforated diffs.

Available Steel Models: PSS • Flush Face PSS-DF • Drop Face Available Aluminum Model: PSS-AA • Flush Face

• Vertical air pattern can be obtained by turning all deflector blades inward.

Products Include: • Standard Finish - #26 White. • Titus Series PSS perforated star diffs generate a high induction air pattern that maximizes throw. • PSS diffs deliver a horizontal blanket of air that adheres to the ceiling even at varying volumes. An excellent choice for VAV systems. • Deflector is mounted directly under the neck of the diff to generate the long-throw star pattern.

• Three-way pattern or corner blow can be field adjusted with no increase in pressure drop or sound level. • Available with either side blow or corner blow. Side blow maximizes throw. Corner blow maximizes wall surface coverage in a perimeter installation. • Can be changed to either side blow or corner blow in the field.

access to the star deflector. The optional damper is adjustable after removal of the star deflector. • Perforated face has 3/16” holes on ¼-inch staggered centers. • Material is heavy gauge steel backpan with steel or aluminum perforated face, according to the model selected. • Optional factory-installed R-6 foilbacked insulation available for 24 x 24-inch full face models, neck sizes 6-16, borders 1, 2, 3 and 4.


STAR PATTERN - ADJUSTABLE

PSS, PSS-DF, & PSS-AA

PSS, PSS-DF, PSS-AA

F

• Round neck with deep collar for easy connection to flexible duct. • Perforated face is hinged to allow

FIELD ADJUSTMENTS Models PSS and PSS-AA Border Type 3 (Lay-ln)

Nominal Duct Size D D minus 1/8" Star Deflector

3"

Ceiling Module Size

Models PSS-DF Border Type 3 (Lay-ln or Tegular) (Lay-In shown)

Nominal Duct Size D D minus 1/8" Star Deflector

3"

3/8"



A

A

PSS, PSS-DF, & PSS-AA

Pattern can be changed from side blow to corner blow and vice versa by removing four screws, rotating deflector 45 degrees, and replacing screws.

Ceiling Module minus ¼"

Section A-A

Front Back Blades Blades Back blades can be redirected to produce directional adjustment pattern as shown above.

F97

Diffs


DIMENSIONS BORDER TYPES

In addition to Border Type 3 (lay-in), as dimensioned on the preceding page, Series PSS diffs are also available in border types to fit the various ceiling systems shown here. • All of these border types can be furnished with both the 12 x 12-inch and 24 x 24-inch face or ceiling module size. • The table below indicates the round and square neck sizes that can be selected.

Border Type 1 (Surface Mount) Module Size minus 1"


¼" Ceiling Opening = Module Size Module Size plus 1"


AVAILABLE SIZES Nominal Duct Size D 6x6

F

MODELS PSS, PSS-AA

Face or Ceiling Module Size 12x12

24x24

●

●

8x8

●

10x10

●

12x12

●

6” Dia.

●

●




Note: 4SL can be installed after ceiling tiles are in place.

8” Dia.

●

10” Dia.

●

12” Dia.

●

MODEL PSS-DF

14” Dia.

●

16” Dia.

●


● Indicates available size. Not all

Border Type 4SL (Spline Side Lock)

Module Size minus 1"


sizes available in all duct sizes.

¼"

⅜"

⅜"


Ceiling Opening = Module Size

Module Size plus 1"

DIMENSIONS


F98

Optional Molded Insulation Blanket Insulation is R-6 where blanket has the most depth. One-inch clearance on each side of neck is left for insulated duct connection. 24 x 24-inch fmodule size only. Blanket is factory installed.





Diffs

DISCHARGE PATTERNS

Side Blow

Corner Blow

Field Adjusted Plan View Plan View

Plan View

Factory Set, 4 Way Factory Set, 4 Way

Not available with 12 x 12 neck size.

Back blades can be redirected to produce directional adjustment pattern as shown above.

EXTERIOR ZONE APPLICATIONS ILLUSTRATING WALL EFFECT Ceiling

Ceiling

Ceiling

Elevation

Elevation Elevation

Wall

Side blow gives maximum throw.

Wall

Wall

Corner blow gives maximum spread.

Plan View

Plan View

Corner blow with directional adjustment gives Plan maximum wall View coverage.


AVAILABLE DISCHARGE PATTERNS

F

INTERIOR ZONE APPLICATIONS

Plan View

Plan View

Corner blow with directional adjustment blows away from walls to avoid drafts.

Corner blow with directional adjustment fills corner.

TYPICAL DISCHARGE PATTERN - ELEVATION

Ceiling Airflow

PSS

Ceiling Airflow

PSS projects a tight blanket of air that adheres to the ceiling, even at low air volumes. Guards against smudging. Excellent VAV performance.

DISCHARGE PATTERNS

Alternating side blow and corner blow settings allow diffs to be closely spaced without creating down drafts that would otherwise result from two airstreams colliding head-on.

F99

Diffs

PSS - ADJUSTABLE - SIDE AND CORNER BLOW PATTERN

12 x 12 Module


PERFORMANCE DATA

6" Dia.

6x6 Neck

6" Dia.

6x6 Neck

8" Dia.

24 x 24 Module

F

8x8 Neck

10" Dia.

10 x 10 Neck

12" Dia.

12 x 12 Neck

14" Dia.

PERFORMANCE DATA

16" Dia.

F100

Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw

300 0.006 59 0.022 1-2-5 75 0.024 2-3-6 59 0.016 1-2-5 75 0.017 2-3-6 105 0.018 2-4-7 133 0.019 3-4-9 164 0.020 3-5-10 208 0.022 4-6-11 236 0.023 4-6-12 300 0.021 5-7-14 321 0.021 5-7-15 419 0.021 6-8-17

400 0.010 79 0.039 2-3-6 100 0.043 3-4-8 79 0.029 2-3-6 100 0.030 3-4-8 140 0.032 11 3-5-10 178 0.034 12 4-6-11 218 0.036 13 4-6-12 278 0.039 14 5-8-14 314 0.041 15 5-8-15 400 0.036 16 6-9-17 428 0.037 16 6-10-17 559 0.038 17 7-11-20

500 0.016 98 0.060 16 3-4-8 125 0.067 17 3-5-9 98 0.045 16 3-4-8 125 0.047 17 3-5-9 175 0.050 19 4-6-11 222 0.053 20 5-7-12 273 0.056 20 5-8-14 347 0.061 21 6-9-15 393 0.064 22 7-10-16 500 0.057 23 8-12-18 535 0.057 23 8-12-19 698 0.059 24 9-14-22

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. • For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog. • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB.

600 0.022 118 0.087 22 3-5-9 150 0.097 23 4-6-10 118 0.065 22 3-5-9 150 0.067 23 4-6-10 209 0.072 25 5-7-12 267 0.076 26 6-9-14 327 0.081 26 6-10-15 417 0.088 27 8-11-17 471 0.093 28 8-12-18 600 0.082 29 9-14-20 641 0.083 29 10-15-21 838 0.085 30 11-17-24

700 0.031 137 0.118 27 4-6-10 175 0.131 28 5-7-11 137 0.088 27 4-6-10 175 0.091 28 5-7-11 244 0.098 30 6-9-13 311 0.104 31 7-10-15 382 0.111 32 8-11-16 486 0.120 33 9-13-18 550 0.126 33 9-14-19 700 0.112 34 11-15-22 748 0.112 34 11-16-23 977 0.115 35 13-18-26

800 0.040 157 0.154 32 4-6-10 200 0.172 33 5-8-12 157 0.115 32 4-6-10 200 0.119 33 5-8-12 279 0.128 34 6-10-14 356 0.136 35 8-11-16 436 0.145 36 9-12-17 556 0.157 37 10-14-20 628 0.165 37 11-15-21 800 0.146 38 12-17-23 855 0.147 39 13-17-24 1117 0.151 40 15-20-28

1000 0.062 196 0.241 39 5-8-12 250 0.268 40 6-9-13 196 0.180 39 5-8-12 250 0.187 40 6-9-13 349 0.200 41 8-11-15 444 0.212 42 9-12-17 545 0.226 43 11-14-19 694 0.246 44 13-15-22 785 0.258 45 13-16-23 1000 0.228 46 15-18-26 1069 0.229 46 16-19-27 1396 0.235 47 18-22-31

1200 0.090 236 0.347 45 6-9-13 300 0.386 46 8-10-14 236 0.258 45 6-9-13 300 0.269 46 8-10-14 419 0.288 48 10-12-17 533 0.306 49 11-14-19 654 0.325 49 12-15-21 833 0.354 50 14-17-24 942 0.371 51 15-18-25 1200 0.328 52 17-20-29 1283 0.330 52 17-21-30 1676 0.339 53 20-24-34

1400 0.122 275 0.473 50 8-10-14 350 0.525 51 9-11-15 275 0.352 50 8-10-14 350 0.366 51 9-11-15 489 0.392 53 11-13-18 622 0.416 54 12-15-21 764 0.443 54 13-16-23 972 0.481 55 15-18-26 1100 0.505 56 16-19-27 1400 0.447 57 18-22-31 1497 0.449 57 18-23-32 1955 0.461 58 21-26-37

• Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts. • Dash (-) in space denotes an NC value of less than 10. • All pressures are given in inches of water. • To obtain static pressure, subtract the velocity pressure from the total pressure.

Diffs


STAR PATTERN Available Steel Models: PSS • Supply • Flush Face PSS-DF • Supply • Drop Face Available Aluminum Model: PSS-AA • Supply • Flush Face Perforated ceiling diffs shall be Titus Model PSS (steel, flush face, supply), PSS-DF (steel, drop face, supply) or PSS-AA (aluminum, flush face, supply) star pattern diff. Diffs shall have a perforated face with 3/16-inch diameter holes on ¼-inch staggered centers and no less than 51 percent free area. Perforated face shall be steel or aluminum according to the model selected.

The backpan shall be one piece stamped heavy gauge steel of the sizes and mounting types shown on the plans and outlet schedule. The diff neck shall have 1⅛-inch depth for easy duct connection. The diffs shall be shipped from the factory set for a four-way star airflow pattern. The backpan of the diff shall be constructed with sheet metal screw locator dimples to allow field adjustment from a four-way side blow to a four-way corner blow airflow pattern. The diff shall be capable of being field adjusted to change the airflow pattern without a significant increase in pressure drop or sound level, and shall also be adjustable for vertical airflow. The star deflector shall be one piece construction and must be mounted on the neck of the diff (face mounted deflectors are not acceptable). The deflector shall include a center opening to allow access to an optional damper. The perforated face must be easily unlatchable from the backpan to facilitate opening of the face for deflector adjustment or to

access an optional damper. The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering, or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff by unlatching the diff face. The diff must be designed such that complete removal of the face is not required during damper adjustment. The manufacturer shall provide published performance data for the perforated diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.



F

MODEL NUMBER SPECIFICATION Accessories

Model Flush Face PSS PSS-DF Drop Face XXX-XX Neck Size

XX x XX

Module Size 12x12 24x24 XX x XX Border

6, 8, 10, Surface Mount 12, 14, 16, Snap-In 6x6, 8x8, Lay-In 10x10, Spline 12x12 Spline, Sliding Lock

Finish 01 Aluminum 26 White XXX

XX

1 2 3 4 4SL


Note: See damper model for size availability. Note 2: Available on PSS 24”x24” module size, border 3.



XX Blow Pattern

Radial, Round Neck Radial, Round Neck Corner Opposed Blade, Round Neck Side SP Opposed Blade, Round Neck Combination, Round Neck Butterfly, Round Neck Opposed Blade, Rect. Neck, Neck Mounted Opposed Blade, Rect. Duct, Duct Mounted

Model


Aluminum, Flush Face

PSS-AA

XX x XX

XX

XX-XXX

Note 1: See damper model for size availability. Note 2: Available on PSS-AA 24”x24” module size, border 3.

D-100 AG-100 D-75 AG-75 AG-65 AG-85 AG-95 AG-35B

Neck Size 6, 8, 10, 12, 14, 16, 6x6, 8x8, 10x10, 12x12

XX x XX

Finish 01 Aluminum 26 White XXX

Border

Surface Mount 1 Snap-In 2 Lay-In 3 Spline 4 Spline, Sliding Lock 4SL

XXX Optional Damper (note 1)

XX Blow

Radial, Round Neck Pattern Radial, Round Neck Corner Opposed Blade, Round Neck Side SP Opposed Blade, Round Neck Combination, Round Neck Butterfly, Round Neck Opposed Blade, Rect. Neck, Neck Mounted Opposed Blade, Rect. Duct, Duct Mounted

SPECIFICATIONS

Accessories


F101

Diffs

PCS, PCS-DF, PCS-AA • Discharge pattern can be adjusted from horizontal to vertical. Can be adjusted before or after installation.

CURVED BLADE - 1, 2, 3 OR 4-WAY DEFLECTORS Available Steel Models: PCS • Flush Face PCS-DF • Drop Face Available Aluminum Model: PCS-AA • Flush Face

• Discharge pattern is adjusted by dropping the hinged, perforated face and moving the curved deflector blades (see the Removing Perforated Face and Adjusting Pattern Controllers diagram within this section).

Products Include: • Standard Finish - #26 White. • Titus Series PCS ceiling diffs are designed for longer throws. • Good performance in variable air volume systems.

F

Model PCS and PCS-AA Border Type 3 (Lay-In)

PCS, PCS-DF, & PCS-AA



• Round inlet collar is approximately 1½-inch deep for easy duct connection.

• Dropping the perforated face also gives access for adjusting the optional damper.

• Material is heavy gauge steel backpan with steel or aluminum perforated face, according to the model selected.

• Perforated face has 3/16-inch diameter holes on ¼-inch staggered centers. Nominal Duct Size D D minus 1/8"

24"x24" Module Size Backpan

12"x12" Module Size Backpan B

A


Model PCS-DF Border Type 3 (Lay-In or Tegular) (Lay-In shown)

Nominal Duct Size D D minus 1/8"

24"x24" Module Size Backpan

12"x12" Module Size Backpan B

A


PCS, PCS-DF, & PCS-AA

Ceiling Module Size

DIMENSIONS Face or Ceiling Module Size 12 x 12 12 x 12 24 x 12 24 X 12 16 x 16 (note 1) 16 x 16 20 x 20 (note 1) 20 x 20 24 x 24 48 x 24

F102

3/8"

Neck Sizes 6, 8 6 x 6, 8 x 8 6, 8 6 x 6, 8 x 8, 18 x 6 6, 8, 10 6 x 6, 8 x 8, 10 x 10, 12 x 12 6, 8, 10, 12, 14 6 x 6, 8 x 8, 10 x 10, 12 x 12 6, 8 10, 12, 14, 15, 16, 6 x 6, 8 x 8, 10 x 10, 12 x 12, 14 x 14, 15 x 15, 16 x 16 6, 8, 10, 12, 14, 16, 6 x 6, 8 x 8, 10 x 10, 12 x 12, 16 x 16

Dimension A B 4 2 33/8 13/8 3½ 1½ 3½ 1½ 3½ 1½ 3½ 1½ 3½ 1½ 3½ 1½ 3¼ 1 3¾ 1½ 3½ 1½

Note 1: Module Size 16x16 and 20x20 are only available with Border Type 3. Note 2: Shaded neck sizes indicate the die-stamped backpan shown above is used. The square backpan is used for all other neck sizes. All dimensions are in inches.

Diffs

DIMENSIONS In addition to Border Type 3 (lay-in), as dimensioned on the preceding page, Series PCS diffs are also available in border types to fit the various ceiling systems shown here.

• All of these border types can be furnished with both the 12 x 12inch and 24 x 24-inch face or ceiling module size.

• The following tables indicate the round and square neck sizes that can be selected.

MODELS PCS, PCS-AA Border Type 1 (Surface Mount)


12"x12" Backpan


1" Border

24"x24" Backpan

¼" Ceiling Module Size minus 1/16"



BORDER TYPES

Module Size plus 1"

MODEL PCS-DF Border Type 1 (Surface Mount)

F


12"x12" Backpan


1" Border

24"x24" Backpan

(sizes 6", 8", 10", 12", 15"; Round & Square)

¼" 3

3

/8"


/8"


Module Size plus 1"

AVAILABLE SIZES PCS, PCS-DF, PCS-AA Square Backpan Module Size

Inlet Size 12x12 ❏ ●

24x12 ● ●

16x16 ● ● ● ●

20x20 ● ● ● ●

24x24 ❏ ❏ ❏ ❏ ● ● ●

48x24 ● ● ● ●

●

6” Dia. 8” Dia. 10” Dia. 12” Dia. 14” Dia. 15” Dia. 16” Dia.

●

● Indicates available size. Not all sizes available in all border types. ❏ Indicates aluminum (AA) available. ●/❏ Shaded area indicates stamped, formed backpan size.


12x12 ❏

24x12 ●

16x16 ● ● ●

20x20 ● ● ● ● ●

24x24 ❏ ❏ ❏ ❏ ❏ ● ❏

48x24 ● ● ● ●

●

DIMENSIONS

6x6 8x8 10x10 12x12 14x14 15x15 16x16 18x6

PCS, PCS-DF, PCS-AA Square Backpan Module Size

Inlet Size

F103

Diffs


INSTALLATIONS

F

REMOVING PERFORATED FACE

1. Insert small screwdriver or other slim instrument to push latch inward from border.

3. Face will now swing down with the other side hinging.

2. Repeat on opposite side.

ADJUSTING PATTERN CONTROLLERS Round Neck - 4-Way

Square Neck - 4-Way Tension wire holds blades in position after pattern has been adjusted.

Individually adjustable curved blades.

INSTALLATIONS

The pattern deflector in the neck of the diff consists of individually adjustable blades. These blades vary the discharge pattern from full horizontal to vertical and also damper the air volume.

F104

1-Way

The standard model PCS diff has a 4-way discharge pattern. Also available are the patterns below.

2-Way Opposite

2-Way Corner

3-Way

Diffs

PERFORMANCE DATA

12" x 12" Module Size

6" Neck

8" Neck

6" Neck


8" Neck

10" Neck

12" Neck

14" Neck

4 3 2 1

4 3 2 1

4 3 2 1

4 3 2 1

4 3 2 1

4 3 2 1

4 3 2 1

300 0.006 59 0.014 1-1-5 1-2-8 1-2-8 1-3-9 105 0.020 1-2-7 1-3-11 1-3-11 1-3-12 59 0.008 0-1-4 1-1-6 1-2-8 1-2-9 105 0.011 1-1-6 1-2-7 1-3-11 1-3-12 164 0.015 1-2-7 1-2-9 1-3-13 2-4-15 236 0.018 1-2-8 1-3-11 2-4-16 2-4-18 321 11 0.022 1-2-10 1-3-13 2-5-19 2-5-21 419 12 0.026 1-3-11 2-4-15 2-5-21 3-6-24

400 0.010 78 0.025 1-2-7 2-4-11 2-4-12 2-4-12 140 0.036 1-3-9 2-5-14 2-5-16 3-6-17 79 12 0.015 1-2-7 1-2-9 2-4-11 2-4-13 140 14 0.020 1-2-9 1-3-11 2-5-14 2-5-18 218 15 0.027 1-3-11 2-4-14 3-6-18 3-7-22 314 16 0.032 2-4-13 2-5-17 3-7-21 4-8-27 428 17 0.039 2-4-15 3-6-20 4-8-25 4-9- 1 559 18 0.046 2-5-17 3-7-23 4-9-28 5-11-36

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. • For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog. • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB.

500 600 0.016 0.022 98 118 13 19 0.039 0.056 2-4-8 2-5-8 3-6-13 4-8-14 3-6-15 4-8-17 3-7-15 4-9-18 175 209 15 21 0.056 0.081 2-5-10 3-7-11 3-8-17 5-11-19 3-8-20 5-11-23 4-9-21 6-12-25 98 118 17 21 0.023 0.034 1-3-8 2-4-9 2-4-11 2-6-12 2-6-12 4-8-13 3-6-15 4-9-16 175 209 19 23 0.031 0.045 2-4-11 2-6-12 2-5-14 3-7-16 3-7-16 5-11-17 4-8-20 5-12-22 273 327 20 24 0.042 0.061 2-5-14 3-7-15 3-6-18 4-9-19 4-9-20 6-13-21 5-10-25 7-15-27 393 471 21 25 0.050 0.072 3-6-16 4-8-18 3-8-21 5-11-23 5-11-24 7-16-26 6-12-30 8-18-33 535 641 22 26 0.061 0.088 3-7-19 4-10-21 4-9-25 6-13-27 6-13-27 8-19-30 6-14-35 9-21-38 698 838 23 27 0.072 0.103 3-8-22 5-11-25 5-10-28 7-15-31 7-15-31 9-21-34 7-17-40 11-24-44

700 0.031 137 25 0.076 3-6-9 5-9-15 5-11-18 6-11-20 244 26 0.110 5-8-12 7-12-21 7-14-24 8-14-27 137 24 0.046 3-6-10 3-7-13 5-10-14 5-12-18 244 26 0.061 3-8-13 5-10-17 6-13-19 7-16-24 382 27 0.082 4-9-17 6-12-21 8-16-23 9-20-30 550 29 0.098 5-11-20 7-15-25 10-20-28 11-24-35 748 29 0.119 6-13-23 8-17-29 11-23-32 13-28-41 977 30 0.141 7-15-27 9-20-34 13-26-37 14-31-47

800 0.040 157 29 0.100 4-7-10 7-11-16 7-12-19 8-12-21 279 30 0.144 6-9-13 9-14-22 9-16-26 11-17-28 157 27 0.060 3-7-11 4-9-13 6-11-15 7-13-19 279 29 0.080 4-9-14 6-11-18 8-14-20 9-18-25 436 30 0.108 5-11-18 7-14-22 11-18-25 12-22-32 628 31 0.128 7-13-21 9-17-27 13-21-30 14-27-38 855 32 0.156 8-15-25 10-20-31 15-25-35 16-31-44 1117 33 0.184 9-17-28 12-23-36 17-28-40 19-36-51

900 0.051 176 33 0.126 5-7-10 8-12-17 8-14-21 9-14-23 314 34 0.182 7-10-14 11-16-23 11-18-28 12-19-30 177 30 0.076 4-7-11 6-10-14 8-11-16 9-14-20 314 32 0.101 6-10-15 7-13-19 11-15-21 12-19-27 491 33 0.136 7-12-19 9-16-24 13-19-26 15-24-34 707 34 0.162 8-15-23 11-19-29 16-22-32 18-28-40 962 35 0.197 10-17-26 13-22-33 19-26-37 21-33-47 1257 36 0.232 11-20-30 15-26-38 21-30-42 24-38-54

1000 0.062 196 36 0.156 6-8-11 9-13-18 10-15-22 10-15-24 349 38 0.224 8-10-15 12-17-25 13-20-29 14-21-32 196 32 0.094 5-8-12 7-11-15 10-12-17 11-15-21 349 34 0.125 7-11-16 9-14-20 13-16-22 15-20-28 545 35 0.168 9-14-20 11-18-25 16-20-28 18-25-35 785 36 0.200 10-16-24 14-21-30 19-24-33 22-30-42 1069 37 0.243 12-19-28 16-25-35 22-27-39 26-35-49 1396 38 0.287 14-22-32 18-28-40 26-31-44 29-40-57

1100 0.075 216 40 0.189 6-8-11 10-14-19 11-16-23 11-17-25 384 41 0.272 8-11-15 13-18-26 15-22-30 15-23-33 216 34 0.113 6-9-12 8-11-16 10-12-17 12-16-22 384 36 0.151 8-12-17 10-15-21 13-16-23 16-21-30 600 37 0.204 10-15-21 13-19-26 17-21-29 21-26-37 864 38 0.241 12-18-25 16-22-32 20-25-35 25-31-44 1176 39 0.294 14-21-29 18-26-37 24-29-41 29-37-52 1536 40 0.347 16-24-33 21-30-42 27-33-47 33-42-59


F

PERFORMANCE DATA

16" Neck

4 3 2 1

Neck Velocity Velocity Pressure Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw


PCS - ROUND - CURVED BLADE - ADJUSTABLE - 1-, 2-, 3- OR 4-WAY DEFLECTORS

F105

Diffs

PCS - SQUARE - CURVED BLADE - ADJUSTABLE - 1-, 2-, 3- OR 4-WAY DEFLECTORS



PERFORMANCE DATA

6" x 6" Neck

8" x 8" Neck

6" x 6" Neck

F 24" x 24" Module Size

8" x 8" Neck

4 3 2 1

4 3 2 1

4 3 2 1

4 3 2 1

10" x 10" 4 Neck 3 2 1

12" x 12" 4 Neck 3 2 1

PERFORMANCE DATA

14" x 14" 4 Neck 3 2 1

F106

15" x 15" 4 Neck 3 2 1

16" x 16" 4 Neck 3 2 1

Neck Velocity Velocity Pressure Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm NC (Noise Criterion) Total Pressure Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw

300 0.006 75 0.016 1-2-6 1-2-9 1-2-9 1-3-11 133 0.023 1-2-8 1-3-12 1-3-12 2-4-14 75 0.010 1-1-5 1-2-6 1-2-9 1-3-10 133 0.014 1-2-6 1-2-8 1-3-12 1-3-13 208 0.017 1-2-8 1-3-11 2-4-15 2-4-17 300 0.020 1-2-9 1-3-13 2-5-18 2-5-20 408 12 0.026 1-3-11 2-4-15 2-5-21 3-6-24 469 12 0.027 1-3-12 2-4-16 3-6-23 3-6-25 533 13 0.030 1-3-12 2-4-17 3-6-24 3-7-27

400 0.010 100 0.029 1-3-8 2-4-12 2-4-14 2-5-14 178 0.041 2-4-10 2-6-16 2-6-18 3-7-19 100 13 0.017 1-2-7 1-3-10 2-4-12 2-4-15 178 15 0.025 1-3-10 2-4-13 2-5-16 3-6-20 278 16 0.031 2-3-12 2-5-16 3-7-20 3-7-25 400 17 0.035 2-4-15 2-6-19 4-8-24 4-9-30 544 18 0.046 2-5-17 3-7-22 4-9-28 5-10-35 625 18 0.049 2-5-19 3-7-24 4-10-30 5-11-38 711 19 0.054 2-6-20 3-7-26 5-11-32 5-12-40

500 0.016 125 14 0.045 2-4-9 3-7-15 3-7-17 4-8-18 222 15 0.064 3-6-12 4-9-20 4-9-23 5-11-23 125 18 0.026 1-3-9 2-4-12 3-6-13 3-7-17 222 19 0.039 2-4-12 3-6-16 4-8-18 4-9-23 347 21 0.048 2-5-15 3-7-20 5-10-22 5-12-28 500 22 0.055 3-7-19 4-9-24 6-13-27 6-14-34 681 23 0.072 3-8-22 5-10-28 6-15-31 7-16-39 781 23 0.076 4-8-23 5-11-30 7-16-33 8-18-42 889 24 0.084 4-9-25 5-12-32 7-17-35 8-19-45

600 0.022 150 20 0.065 3-6-10 4-9-16 4-9-19 5-11-21 267 21 0.092 4 - 8 - 13 6-12-21 6-12-25 7-14-28 150 22 0.038 2-5-10 3-6-13 4-9-15 4-10-19 267 23 0.056 3-6-14 4-8-18 5-12-19 6-13-25 417 25 0.070 3-8-17 5-11-22 7-15-24 7-17-31 600 26 0.079 4-9-21 6-13-26 8-18-29 9-20-37 817 27 0.103 5-11-24 7-15-31 9-21-34 10-24-43 938 27 0.110 5-12-26 7-16-33 10-23-36 11-25-46 1067 28 0.121 6-12-28 7-17-35 11-24-39 12-27-49

700 0.031 175 25 0.089 4-7-10 6-11-17 6-12-21 7-12-22 311 26 0.125 5 - 9 - 14 8-14-23 8-16-27 9-16-30 175 25 0.052 3-6-11 4-8-14 5-11-16 6-13-20 311 27 0.076 4-8-15 5-11-19 7-15-21 8-18-27 486 28 0.095 5-11-19 6-14-24 9-19-26 10-22-33 700 29 0.107 6-13-22 8-17-28 11-22-31 12-27-40 953 30 0.141 7-15-26 9-20-33 13-26-37 14-31-47 1094 31 0.150 7-16-28 10-21-36 14-28-39 15-33-50 1244 31 0.165 8-17-30 10-22-38 15-30-42 16-35-53


800 0.040 200 30 0.116 5-8-11 7-12-19 7-14-22 9-14-24 356 31 0.164 7-10-15 10-16-25 10-18-29 12-19-32 200 28 0.068 4-7-12 5-10-15 7-12-17 8-15-21 356 30 0.100 5-10-16 7-13-20 9-16-22 11-20-29 556 31 0.124 6-12-20 8-16-25 12-20-28 13-25-36 800 32 0.140 7-15-24 10-19-30 14-24-34 16-30-43 1089 33 0.184 9-17-28 12-22-35 17-28-39 19-35-50 1250 34 0.196 9-19-30 12-24-38 18-30-42 20-38-54 1422 34 0.215 10-20-32 13-26-41 19-32-45 21-40-57

900 0.051 225 33 0.146 6-8-12 9- 4-20 9-15-23 11-16-25 400 35 0.207 8-11-16 12-18-26 12-20-31 14-21-34 225 30 0.086 5-8-13 6-11-16 9-13-18 10-16-23 400 32 0.126 6-11-17 8-14-21 12-17-24 13-21-30 625 34 0.157 8-14-21 11-18-27 15-21-30 17-27-38 900 35 0.177 9-17-25 13-22-32 18-25-36 20-32-45 1225 36 0.232 11-19-30 15-25-38 21-29-42 24-37-53 1406 36 0.247 12-21-32 16-27-40 23-32-45 25-40-57 1600 36 0.273 12-22-34 17-29-43 24-34-48 27-43-61

1000 0.062 250 37 0.181 7-9-12 10-15-21 11-17-25 12-18-27 444 38 0.256 9-12-16 13-20-28 15-23-33 16-23-36 250 33 0.106 6-9-13 8-12-17 11-13-19 12-17-24 444 35 0.156 8-12-18 10-16-23 14-18-25 17-23-32 694 36 0.193 10-15-22 13-20-28 18-22-31 21-28-40 1000 37 0.218 12-19-27 16-24-34 22-27-38 25-34-48 1361 38 0.287 13-22-31 18-28-40 25-31-44 29-39-56 1563 38 0.305 14-23-34 19-30-42 27-33-47 31-42-60 1778 39 0.337 15-25-36 21-32-45 29-35-50 33-45-64

1100 0.075 275 40 0.219 7-9-13 11-15-22 12-18-26 13-19-28 489 41 0.309 10-12-17 15-21-29 17-24-34 17-26-38 275 35 0.128 7-10-14 9-13-18 11-14-20 14-18-25 489 37 0.189 9-13-19 12-17-24 15-19-26 19-24-33 764 38 0.234 11-17-23 15-21-30 19-23-33 23-30-42 1100 39 0.264 14-20-28 18-25-36 23-28-39 28-35-50 1497 40 0.347 16-23-33 21-29-42 27-33-46 33-41-59 1719 40 0.370 17-25-35 22-32-45 28-35-49 35-44-63 1956 41 0.407 18-27-38 23-34-48 30-37-53 37-47-67

Diffs


CURVED BLADE Available Steel Models: PCS • Supply • Flush Face PCS-DF • Supply • Drop Face

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H.

Available Aluminum Model: PCS-AA • Supply • Flush Face Perforated ceiling diffs shall be Titus Model PCS (steel, flush face), PCS-DF (steel, drop face) or PCS-AA (aluminum, flush face). Diffs shall have a perforated face with 3 /16-inch diameter holes on ¼-inch staggered centers and no less than 51 percent free area. Perforated face shall be steel or aluminum according to the model selected. The backpan shall be heavy gauge steel of the sizes and mounting types shown on the plans and outlet schedule. The diff neck shall have at least 1 inch depth for easy duct connection.

The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff by unlatching the diff face. The diff must be designed such that complete removal of the face is not required during damper adjustment. The manufacturer shall provide published performance data for the perforated diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


Model Flush Face PCS PCS-DF Drop Face XXX-XX Neck Size

XX x XX 6, 8, 10, 12, 14, 16, 6x6, 8x8, 10x10, 12x12, 14x14, 15x15, 16x16, 18x6

Module Size 12x12 24x24 XX x XX Border Surface Mount Lay-In Spline

Finish 01 26 X

F

Accessories EG-T Equalizing Grid, Round EGL-T Equalizing Grid, Long EGS-T Equalizing Grid, Short EQT Earthquake Tabs

Aluminum White

XX


Individually adjustable curved deflectors shall be mounted in the neck of the diff and must allow the discharged air to enter the room in either vertical or one-, two-, threeor four-way horizontal jets. The perforated face must be easily unlatchable from the backpan to facilitate opening of the face for pattern controller adjustment or to access an optional damper.


XX-XXX

Optional Damper (note) Radial, Round Neck D-100 Radial, Round Neck AG-100 Opposed Blade, Round Neck D-75 Opposed Blade, Round Neck AG-75 Opposed Blade, Rect. Neck AG-95

1 3 4

XXX

XX Blow Pattern

1-Way 2-Way, Opposite 2-Way Corner 3-Way 4-Way

1 2 2C 3 4



Aluminum, Flush Face

PCS-AA Neck Size

XX x XX 6, 8, 10, 12, 14, 16, 6x6, 8x8, 10x10, 12x12

XX x XX Border Surface Mount Lay-In Spline


Finish 01 26 X

XX

Aluminum White

XX-XXX


1 3 4

XXX

XX Blow Pattern


1 2 2C 3 4

SPECIFICATIONS

Model


F107

Diffs

NARROW TEE NARROW TEE - STEEL Available Supply Models: PAS-NT • Round Pattern PSS-NT • Star Pattern PCS-NT • Curved Blade Available Return Models: PAR-NT • Return PXP-NT • Return

•

Titus has a complete line of perforated diffs that are designed to integrate into narrow tee ceiling systems.

•

Perforated face blends diff into ceiling system.

NARROW TEE



For Performance Data and Notes, please refer to page F86 for PAS-NT; page F92 for PAR-NT and PXP-NT; page F100 for PSS-NT; page F105 for PCS-NT. For Suggested Specifications, please refer to page F110 for PSS-NT; page F111 for PCS-NT; and page F112 for PXP-NT.

F

PAR-NT

Nominal Duct Size D D minus 1/8"

1½" 3/8"

3¼"

23¾" 24"

PXP-NT

NARROW TEE

3/8"

F108

23¾" 24"

Diffs


vertical or one-, two-, three- or four-way horizontal jets. The perforated face must be easily unlatchable from the backpan to facilitate opening of the face for pattern controller adjustment or to access an optional damper.

Available Steel Models: PAS-NT • Supply PAR-NT • Return Perforated ceiling diffs shall be Titus Model PAS-NT (steel) for supply or PAR-NT (steel) for return. The return model shall have the same face and border construction as the supply model for harmonious appearance in the room. Diffs shall be compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems. Diffs shall have a perforated face with 3/16-inch diameter holes on ¼-inch staggered centers and no less than 51 percent free area. The backpan shall be one piece stamped heavy gauge steel of the sizes and mounting types shown on the plans and outlet schedule. The diff neck shall have 1⅛-inch depth for easy duct connection. Diffs must discharge a uniform horizontal blanket of air into the room and protect ceiling against smudging. Pattern controllers in the supply model shall be mounted on the back of the perforated face and must be field adjustable to allow the discharged air to enter the room in either

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff by unlatching the diff face. The diff must be designed such that complete removal of the face is not required during damper adjustment. The manufacturer shall provide published performance data for the perforated diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.



F

MODEL NUMBER SPECIFICATION Accessories (note 3)

Model PAS-NT Supply PAR-NT Return XXX-XX Neck Size

Module Size XX x XX

24 x 24

Finish 01 Aluminum 26 White XX

6, 8, 10, 12, 14, 16, 6x6, 8x8, 10x10, 12x12, 15x15, 18x18, 22x22 (note 1)



SPECIFICATIONS

Note 1: Neck Size 22 x 22 is only available with PAR-NT. Note 2: See damper model for size availability. Note 3: Accessories in parentheses designate PAR-NT accessories. Note 4: Available on PSS-AA 24”x24” module size, border 3.

Equalizing Grid, Round EG (EG-T) Equalizing Grid, Long EGL(EGL-T) Equalizing Grid, Short EGS (EGS-T) Earthquake Tabs EQT Insulation Blanket IB (note 4)

F109

Diffs



F


be mounted in the neck of the diff (face mounted deflectors are not acceptable).

STAR PATTERN Available Steel Model: PSS-NT Perforated ceiling diffs shall be Titus Model PSS-NT (steel, supply) star pattern diff. Diffs shall have a perforated face with 3/16-inch diameter holes on ¼-inch staggered centers and no less than 51 percent free area. The backpan shall be one piece stamped heavy gauge steel of the sizes and mounting types shown on the plans and outlet schedule. The diff neck shall have 1¼-inch depth for easy duct connection. Diff shall be compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems. The diffs shall be shipped from the factory set for a four-way star airflow pattern. The backpan of the diff shall be constructed with sheet metal screw locator dimples to allow field adjustment from a four-way side blow to a four-way corner blow airflow pattern. The diff shall be capable of being field adjusted to change the airflow pattern without a significant increase in pressure drop or sound level, and shall also be adjustable for vertical airflow. The star deflector shall be one piece construction and must

The deflector shall include a center opening to allow access to an optional damper. The perforated face must be easily unlatchable from the backpan to facilitate opening of the face for deflector adjustment or to access an optional damper. The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff by unlatching the diff face. The diff must be designed such that complete removal of the face is not required during damper adjustment. The manufacturer shall provide published performance data for the perforated diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

MODEL NUMBER SPECIFICATION Accessories

Model

Star Pattern, Narrow Tee

SPECIFICATIONS

PSS-NT XX x XX Neck Size 6, 8, 10, 12, 14, 16, 6x6, 8x8, 10x10, 12x12

F110

Module Size 24 x 24

Finish 01 Aluminum 26 White XX

Note 1: See damper model for size availability. Note 2: Available on PSS-AA 24”x24” module size, border 3.




XX Blow Pattern

Corner Side

SP

Diffs


opening of the face for pattern controller adjustment or to access an optional damper.

CURVED BLADE 1, 2, 3, OR 4-WAY DEFLECTORS Availble Steel Model: PCS-NT Perforated ceiling diffs shall be Titus Model PCS-NT (steel). Diffs shall be compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems. Diffs shall have a perforated face with 3/16-inch diameter holes on ¼-inch staggered centers and no less than 51 percent free area. The backpan shall be heavy gauge steel of the sizes and mounting type shown on the plans and outlet schedule. The diff neck shall have at least 1-inch depth for easy duct connection. Individually adjustable curved deflectors shall be mounted in the neck of the diff and must allow the discharged air to enter the room in either vertical or one-, two-, three- or four-way horizontal jets. The perforated face must be easily unlatchable from the backpan to facilitate

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering, or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff by unlatching the diff face. The diff must be designed such that complete removal of the face is not required during damper adjustment. The manufacturer shall provide published performance data for the perforated diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


Model Curved Blade, Narrow Tee

PCS-NT Neck Size

Module Size XX x XX 6, 8, 10, 12, 14, 16, 6x6, 8x8, 10x10, 12x12, 15x15, 18x18

24 x 24

Finish 01 26 XX



F


Aluminum White

XX-XXX


XXX

XX Blow Pattern


1 2 2C 3 4


SPECIFICATIONS F111

Diffs


SUGGESTED SPECIFICATIONS PERFORATED CEILING DIFFS Available Model: PXP-NT


• Return

Perforated ceiling s for return applications shall be Titus Model PXP-NT (steel). Perforated face s shall have 3/16-inch diameter holes on ¼-inch staggered centers and no less than 51 percent free area. The return s must match Titus supply models in appearance and shall be provided in the sizes and mounting type shown on the plans and outlet schedule. Return s shall be compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems.


SPECIFICATIONS

F

F112

Model

Finish 01 26

Return , Narrow Tee

PXP-NT

24 x 24 Neck Size

Aluminum White

XX Accessories

Earthquake Tabs

XXX EQT

The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering, or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50inch pound force applied. The manufacturer shall provide published performance data for the perforated return s. The s shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

Diffs


Available Supply Models: PMC • Flush Face PMC-DF • Drop Face Available Return Model: PMR • Flush Face Products Include: • Standard Finish - #26 White.

• Each of the modular core sections can easily be removed from the frame and rotated to provide one-, two-, three-way or a vertical air pattern.

• Perforated face discourages unwanted tampering with the air pattern adjustment by providing a barrier in front of the modular core.

• Titus Model PMC perforated, modular core diff is extremely flexible; it can be adjusted for a one-, two-, three- or four-way discharge pattern after it has been installed.

• Shipped with the modular core set for a four-way discharge. • Optional AG-95 damper is accessible for adjustment by opening the perforated face and removing a core module.

• Perforated face has 3/16-inch diameter holes on ¼-inch staggered centers.

Duct Size D minus ⅛"

• Material is heavy gauge steel perforated face and backpan; modular core section is steel. 4 Modular Cores

3½"


• Perforated face provides the architectural advantage of blending the diff into the ceiling system and at the same time offering the performance of the modular core diff for variable air volume applications. (Maintains a horizontal flow pattern from maximum to minimum cfm in VAV systems.)

MODULAR CORE - 1, 2, 3 OR 4-WAY ADJUSTABLE - STEEL

Model PMC Border Type 3 (Lay-In)

PMC, PMC-DF, & PMR

PMC, PMC-DF, PMR

F

• New core design results in a higher quality overall assembly, and easier changes to modular core placement. Note: For PMR Border Types 1 and 3 select the PAR return.

23¾" 24"

Model PMC-DF Border Type 3 (Lay-In or Tegular) (Lay-In shown)

Duct Size D minus ⅛"

4 Modular Cores

3½"

23¾" 24"

Model PMR Border Type 1C (Curved Frame, Surface Mount)

Duct Size Duct Size minus ⅛"

PMC, PMC-DF, & PMR

⅜"

⅜"

1⅝"

Duct Size plus 3"

F113

Diffs


DIMENSIONS

F

BORDER TYPES

In addition to Border Type 3 (lay-in), as dimensioned on the preceding page, PMC diffs are also available in border types for surface mounting applications.

AVAILABLE DUCT SIZES Border Types PMR Module 1, 3, 1C Border Type 1C Duct Sizes (inches) 6x6 12x12 6x6 12x12 20x20 8x8 14x14 8x8 14x14 22x22 10x10 16x16 10x10 16x16 22x10 18x18 18x18 46x22


Border Type 1C (Surface Mount, Curved Frame)

Duct Size plus 6" Duct Size minus ¼"

Duct Size plus 3½" Duct Size minus ¼"

2½"

2½" 3

3/16"

Duct Size plus 7"

Duct Size plus 7"

REMOVING PERFORATED FACE - BORDER TYPE 3

1. Insert small screwdriver or other slim instrument to push latch inward from border.

3. Face will now swing down with the other side hinging.

2. Repeat on opposite side.

MODULAR CORE ADJUSTMENTS

1-Way

2-Way Opposite

2-Way Corner

3-Way

DIMENSIONS

Each of the PMC modular core sections can easily be removed from the frame and rotated to provide the required air pattern.

F114

OPTIONAL MODEL AG-95 - OPPOSED-BLADE DAMPER

21/16" Slot Operator

Available in duct sizes 6 x 6 inches through 16 x 16 inches.

4-Way

Vertical

/8"

Diffs

PERFORMANCE DATA

6x6 Neck

8x8 Neck

1 2 3 4

1 2 3 4

10 x 10 1 Neck 2 3 4

12 x 12 1 Neck 2 3 4

16 x 16 1 Neck 2 3 4

18 x 18 1 Neck 2 3 4

Neck Velocity Velocity Pressure Air Flow, cfm Total Pressure NC (Noise Criteria) Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm Total Pressure NC (Noise Criteria) Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm Total Pressure NC (Noise Criteria) Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm Total Pressure NC (Noise Criteria) Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm Total Pressure NC (Noise Criteria) Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Air Flow, cfm Total Pressure NC (Noise Criteria) Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw Way - Horizontal Throw

300 0.006 75 0.008 3-5-9 1-3-6 1-2-5 1-1-3 133 0.011 4-6-12 2-4-8 2-3-6 1-2-4 208 0.015 5-8-15 2-5-10 2-4-8 1-2-5 300 0.020 6-9-18 3-6-12 2-5-9 2-3-5 469 0.030 12 8-11-23 4-8-15 3-6-12 2-3-7 675 0.041 15 9-14-27 4-9-18 4-7-14 2-4-8

400 0.010 100 0.014 4-6-12 2-4-8 2-3-6 1-2-4 178 0.020 5-8-16 3-5-11 3-4-8 2-2-5 278 0.027 14 7-10-20 4-7-13 3-5-10 2-3-6 400 0.036 17 8-12-24 5-8-16 4-6-12 2-4-7 625 0.053 21 10-15-30 6-10-20 5-8-16 3-5-9 900 0.073 24 12-18-36 7-12-24 6-9-19 4-5-11

600 0.022 150 0.031 17 6-9-18 4-6-12 3-5-9 2-3-5 267 0.044 22 8-12-24 5-8-16 4-6-12 2-4-7 417 0.061 26 10-15-30 7-10-20 5-8-16 3-5-9 600 0.082 30 12-18-36 8-12-24 6-9-19 4-5-11 938 0.119 34 15-23-45 10-15-30 8-12-23 5-7-14 1350 0.165 37 18-27-54 12-18-36 9-14-28 5-8-16

700 0.031 175 0.043 22 7-11-21 5-7-13 4-5-11 2-3-6 311 0.060 27 9-14-27 6-9-18 5-7-14 3-4-8 486 0.083 31 12-18-34 8-12-22 6-9-18 4-5-11 700 0.111 35 14-21-41 9-14-27 7-11-22 4-6-13 1094 0.162 39 18-26-51 12-18-33 9-14-27 5-8-16 1575 0.225 42 21-32-62 14-21-40 11-16-33 6-9-19

800 0.040 200 0.056 27 8-12-22 5-8-14 4-6-12 2-4-7 356 0.079 32 11-16-29 7-11-19 6-8-16 3-5-10 556 0.109 36 13-20-37 9-13-24 7-10-20 4-6-12 800 0.145 39 16-24-44 11-16-29 8-12-24 5-7-14 1250 0.212 43 20-30-55 13-20-36 10-16-30 6-9-18 1800 0.294 46 24-36-66 16-24-43 12-19-36 7-11-22

900 0.051 225 0.070 30 9-14-23 6-9-15 5-7-13 3-4-8 400 0.100 35 12-18-31 8-12-20 6-9-17 4-5-11 625 0.137 39 15-23-39 10-15-25 8-12-21 5-7-14 900 0.184 43 18-27-47 12-18-30 9-14-25 5-8-16 1406 0.268 47 23-34-58 15-23-38 12-17-32 7-10-20 2025 0.372 50 27-41-70 18-27-46 14-21-38 8-12-24

1000 0.062 250 0.087 34 10-15-25 7-10-16 5-8-13 3-5-9 444 0.123 39 13-20-33 9-13-21 7-10-18 4-6-12 694 0.170 43 17-25-41 11-17-27 9-13-22 5-8-15 1000 0.227 46 20-30-49 13-20-32 10-16-27 6-9-18 1563 0.331 50 25-38-61 17-25-40 13-19-34 8-11-22 2250 0.459 53 30-45-74 20-30-48 16-23-40 9-14-27

1100 0.075 275 0.105 37 11-17-26 7-11-17 6-9-14 3-5-9 489 0.149 42 15-22-34 10-15-22 8-11-19 4-7-13 764 0.205 46 18-28-43 12-18-28 9-14-23 6-8-16 1100 0.274 49 22-33-52 15-22-34 11-17-28 7-10-19 1719 0.401 53 28-41-64 18-28-42 14-21-35 8-12-23 2475 0.556 56 33-50-77 22-33-50 17-26-42 10-15-28

• Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts. • Dash (-) in space denotes an NC value of less than 10. • All pressures are given in inches of water. • To obtain static pressure, subtract the velocity pressure from the total pressure.

F

PERFORMANCE DATA

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • Throw values are given for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions.See the section, Engineering Guidelines, for an explanation of catalog throw data. • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB.

500 0.016 125 0.022 12 5-8-15 3-5-10 3-4-8 2-2-5 222 0.031 17 7-10-20 4-7-13 3-5-10 2-3-6 347 0.042 21 8-13-25 6-8-17 4-6-13 3-4-8 500 0.057 24 10-15-30 7-10-20 5-8-16 3-5-9 781 0.083 28 13-19-38 8-13-25 6-10-19 4-6-11 1125 0.115 31 15-23-45 10-15-30 8-12-23 5-7-14


PMC - SUPPLY - MODULAR CORE - 1-, 2-, 3- OR 4-WAY BLOW PATTERN

F115

Diffs



F

in the field for one-, two-, three- or four-way discharge. Each module shall be easily removable to adjust an optional damper in the neck of the diff. The diff core must be mounted in the neck of the diff (face mounted louvers are not acceptable).

PERFORATED CEILING DIFFS MODULAR CORE ADJUSTABLE Available Models: PMC PMC-DF PMR


• Supply • Flush Face • Supply • Drop Face • Return • Flush Face

Perforated modular core ceiling diffs shall be Titus Model PMC (steel, flush face) or PMC-DF (steel, drop face) for supply or PMR (steel, flush face) for return. Diffs shall have a perforated face with 3/16-inch diameter holes on ¼-inch staggered centers and no less than 51 percent free area. The backpan shall be one piece stamped heavy gauge steel of the sizes and mounting types shown on the plans and outlet schedule. The diff neck shall have at least 1-inch depth for easy duct connection. The diff core (supply models) shall consist of fixed louver directional modules, which can be easily repositioned

The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff by unlatching the diff face. The diff must be designed such that complete removal of the face is not required during damper adjustment. The manufacturer shall provide published performance data for the perforated diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


Model PMC PMC-DF

Flush Face Drop Face

XXX-XX

SPECIFICATIONS

Neck Size

F116

XX x XX 6x6, 8x8, 10x10, 12x12, 14x14, 16x16, 18x18

Border 1 1C 3

Surface Mount, Curved Frame Lay-In 24x24 Module

XX Aluminum White

XX

XX-XXX

01 26 Finish

AG-95

Opposed Blade, Rect. Neck

Accessories EGL Equalizing Grid, Short EGS Earthquake Tabs EQT Equalizing Grid, Long

Border

Curved Frame

Neck Size

XXX Optional Damper

Model

PMR

Accessories EGL Equalizing Grid, Short EGS Earthquake Tabs EQT Equalizing Grid, Long

Surface Mount

Surface Mount, Curved Frame

XX x XX 6x6, 8x8, 10x10, 12x12, 14x14,18x18, 20x20, 22x10, 22x22, 46x22

1C Aluminum White

XX

XX-XXX

01 26 Finish

AG-95

XXX Optional Damper Opposed Blade, Rect. Neck

Diffs

Square Ceiling Diffs HIGH PERFORMANCE Available Models: TMS • Steel TMS-AA • Aluminum Products Include: • Standard Finish - #26 White. • Titus Models TMS and TMS-AA square ceiling diffs deliver supply air in a true 360° pattern. Designed to protect ceilings from streaking and smudging. • Excellent performance in variable air volume systems. The uniform, nearly horizontal jet from the outer cone maintains effective room air distribution even when the air volume varies over a considerable range. Ceiling Nominal Module Round Duct A Size B

C

D

E

TMS, TMS-AA

• All sizes have three cones, giving a uniform appearance where different neck sizes are used in the same area. • Screwdriver adjustment of the optional damper is achieved without removing the inner cone. (See Step 2 in Adjusting Optional Damper, Removing Center Core diagram on the following page.)

• Optional factory-installed R-6 foilbacked insulation available for 24 x 24-inch full face models, neck sizes 6-15, borders 1, 2, 3 and 4. • Optional SB sectorizing baffle is available. Consult your Titus representative for details.

• Quick removal of the inner cone with a hex key. (See Step 3 in Adjusting Optional Damper, Removing Center Core diagram on the following page.)

• Material: all sizes are available in steel (Model TMS). Only the 24 x 24-inch ceiling module is available in aluminum with steel bar (Model TMS-AA).

• All cones are die-stamped, one piece construction. Smooth, clean surfaces with no corner ts.

Frame Type 3 Full Face (Lay-In)

B minus ⅛" C

12x12 6, 7 (note 3) 1⅛ 3⅜ ⅜ 12x12

8

24x24

6, 8

24x24

D

1¼ 3½ ⅝ 1¼

5

E

¼

10, 12, 14, 1⅜ 5⅛ ¼ 15

(note 1)

Ceiling Module A minus ¼"

Frame Type 3 Mounted (Lay-In)

Ceiling Module A Nominal Round Duct Size B B minus ⅛" C D E F Ceiling Module A minus ¼"

(note 1) Ceiling Module A

Nominal Round Nominal Face Duct Size B Size F

C

D

E

24x24

4, 5 (note 2)

12x12

3⅛

5⅜

⅜

24x24

6, 7 (note 3)

12x12

1⅛

3⅜

⅜

24x24

8

12x12

1¼

3½

⅝


TMS, TMS-AA

Notes: 1. Aluminum construction is available in full face 24” x 24” ceiling module only. Steel construction is available in all sizes. 2. Adapter is provided for sizes 4 and 5. 3. The smallest neck size available in aluminum is 6 inches.

F

Ceiling Module A Nominal Round Duct Size B

Optional ½" Foil Insulation

12x12 4, 5 (note 2) 3⅛ 5⅜ ⅜


TMS, TMS-AA

F117

Diffs


DIMENSIONS OTHER AVAILABLE FRAME TYPES Frame Type 1 (Surface Mount) Full Face

Frame Type 2 (Snap-In) Full Face or Mounted

Frame Type 4 (Spline) Full Face or Mounted

Ceiling Module A

Ceiling Module A plus 1¼"

Ceiling Module A

Ceiling Module A minus 1"

⅜" ⅜" 1

Mounting Hardware by others

/8" 13/16"

Ceiling Module Face Size

Nominal Round Duct Sizes

Frame Types

12 x 12 12 x 12 4, 5, 6, 7, 8 1, 2, 3, 4 24 x 24 24 x 24 6, 8, 10, 12, 14, 15 1, 2, 3, 4 24 x 24 () 12 x 12 4, 5, 6, 7, 8 2, 3, 4

F

R-6 Fiberglass

Neck Size + 2" Neck Size

Type 3 Frame Shown

Optional Molded Insulation Blanket Insulation is R-6 where blanket has the most depth. One-inch clearance on each side of neck is left for insulated duct connection. 24 x 24-inch full face models only.

Type 1 Frame

Type 3 Frame

Type 2 or Type 4 Frame

DIMENSIONS

ADJUSTING OPTIONAL DAMPER - REMOVING CENTER CONE

1. Remove center plug.

F118

2. Insert screwdriver through hex hole to adjust optional damper.


3. Insert hex key (by others) and unscrew center hub to remove center cone.

Diffs

PERFORMANCE DATA

4" DIa. 5" Dia. 12" x 12" 6" Module DIa. Size 7" DIa. 8" DIa. 6" Dia. 20" x 20" 8" Module Dia. Size 10" Dia. 6" DIa. 8" DIa. 10" DIa. 24" x 24" Module Size 12" Dia.

15" Dia.

400 0.010 35 0.012 1-1-3 55 0.015 1-2-4 79 0.018 2-2-5 107 0.020 2-3-5 140 0.022 2-3-6 79 0.016 1-1-4 140 0.017 2-4-5 218 0.020 2-5-7 79 0.016 1-2-4 140 0.016 2-3-5 218 0.017 2-4-7 314 0.017 3-5-9 428 0.018 4-5-11 491 0.018 4-6-12

500 0.016 44 0.018 1-2-4 68 0.023 2-2-5 98 0.028 2-3-6 134 0.031 2-3-7 175 0.035 3-4-8 98 0.025 1-2-4 175 0.027 2-4-6 273 0.032 3-6-10 98 0.025 1-2-4 175 0.025 2-3-7 273 0.026 3-5-9 393 0.027 11 4-6-11 535 0.028 13 5-7-14 614 0.028 13 5-7-15

600 0.022 52 0.026 1-2-4 82 0.033 2-3-6 118 0.041 2-3-7 160 0.045 3-4-8 209 0.050 12 3-5-9 118 0.035 2-3-5 209 0.038 3-4-8 327 0.045 17 4-7-11 118 0.035 2-3-5 209 0.036 11 3-4-8 327 0.037 14 4-5-11 471 0.038 16 5-7-14 641 0.040 18 5-8-16 736 0.040 19 6-9-18

700 0.031 61 0.035 2-3-5 95 0.044 2-3-7 137 0.056 13 3-4-8 187 0.062 15 3-5-9 244 0.069 17 4-5-11 137 0.048 14 2-3-6 244 0.057 13 4-6-9 382 0.062 20 4-8-14 137 0.048 12 2-3-6 244 0.049 15 3-5-9 382 0.051 18 4-6-13 550 0.052 21 5-8-16 748 0.054 22 6-10-19 859 0.055 23 7-10-21

800 1000 0.040 0.062 70 87 0.046 0.072 12 20 2-3-6 2-4-7 109 136 0.058 0.091 15 23 2-4-7 3-5-8 157 196 0.073 0.114 18 25 3-5-9 4-6-10 214 267 0.081 0.126 20 28 4-5-10 4-7-12 279 349 0.090 0.140 22 29 4-6-12 5-8-13 157 196 0.063 0.099 18 24 2-4-7 3-4-9 279 349 0.067 0.105 19 23 5-7-12 5-8-13 436 545 0.081 0.126 24 31 5-9-15 6-9-18 157 196 0.063 0.099 16 22 2-4-7 3-4-9 279 349 0.064 0.101 19 26 4-5-11 4-7-13 436 545 0.066 0.103 22 29 5-7-14 6-9-17 628 785 0.068 0.106 24 31 6-9-18 8-11-20 855 1069 0.071 0.110 26 33 7-11-21 9-14-23 982 1227 0.072 0.112 27 34 8-12-22 10-15-25


1200 0.090 105 0.104 26 3-4-7 164 0.131 29 4-6-9 236 0.164 32 5-7-11 321 0.181 34 5-8-13 419 0.202 36 6-9-14 236 0.142 30 4-5-10 419 0.152 29 5-9-15 654 0.180 36 7-11-19 236 0.142 28 4-5-11 419 0.145 31 5-8-14 654 0.149 34 7-11-18 942 0.153 36 9-14-22 1283 0.159 38 11-16-25 1473 0.162 39 12-18-27

1400 0.122 122 0.141 31 3-5-8 191 0.178 34 4-7-10 275 0.223 37 5-8-12 374 0.247 39 6-9-14 489 0.275 41 7-11-16 275 0.193 34 4-6-12 489 0.207 34 5-10-17 764 0.240 41 8-12-21 275 0.193 32 4-6-12 489 0.197 36 6-9-16 764 0.202 39 8-13-20 1100 0.208 41 11-16-23 1497 0.216 43 13-19-27 1718 0.220 44 14-21-29

1600 0.160 140 0.184 36 4-6-8 218 0.232 39 5-7-10 314 0.291 42 6-9-13 428 0.322 44 7-10-15 559 0.359 46 8-12-17

F 314 0.252 36 5-7-13 559 0.257 40 7-11-17 873 0.264 43 10-14-21 1257 0.272 45 12-18-25 1710 0.282 47 14-21-29 1963 0.287 48 16-22-31

PERFORMANCE DATA

14" Dia.

Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet


TMS - SQUARE CEILING - ROUND NECK - HIGH PERFORMANCE

F119


PERFORMANCE DATA

PERFORMANCE DATA

F

F120

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • If the diff is mounted on an exposed duct, the throw values are 70% of those listed in the table. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines, for an explanation of catalog throw data.

Diffs • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB. • Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts. • Dash (-) in space denotes an NC value of less than 10. • All pressures are given in inches of water. • To obtain static pressure, subtract the velocity pressure from the total pressure.

Diffs


The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional round damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff. Optional sectorizing baffles shall be available to restrict the discharge air in certain directions.

Available Models: TMS TMS-AA


Square ceiling diffs shall be Titus Model TMS (steel) or TMS-AA (aluminum with steel bar) of the sizes and mounting types shown on the plans and outlet schedule. The TMS and TMS-AA models shall have three cones, which give a uniform face size and appearance when different neck sizes are used in the same area. All cones shall be one piece precision die-stamped; the back cone shall also include an integrally drawn inlet (welded-in inlets and corner ts are not acceptable). The two inner cones shall be constructed as a single, removable inner cone assembly for easy installation and cleaning. The inner cone assembly must have a hole with removable plug in the center to allow quick adjustment of an optional inlet damper without removing the inner cone assembly. Diffs shall be constructed of 24-gauge steel (TMS) or 0.040 aluminum (TMS-AA).

Optional molded insulation blanket shall be available. The insulation will be R-6, foil-backed and provided an additional 1-inch gap around the neck to install insulated flex duct. The manufacturer shall provide published performance data for the square diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


Module Size 12x12 (note 2) 20x20 (note 5) 24x24 (note 3)

Model

Full Face

TMS

XX

Neck Size 4, 5, 6, 7, 8, 10, 12, 14, 15 Note 1: Note 2: Note 3: Note 4: Note 5:

Finish 01 26

XX x XX

X

Aluminum White

XX

Border

1 2 3 4 Available on TMS 24”x24” full-face Borders 1, 2, 3 and 4. Available in neck sizes 4, 5, 6, 7 & 8 only. Available in neck sizes 6, 8, 10, 12, 14 & 15 only. See damper model for size availability. Available in neck sizes 6, 8, & 10 only.

Full Face, Aluminum

TMS-AA

XX

Neck Size 6, 8, 10, 12, 14, 15

Finish 01 26

Module Size 24 x 24 Border Surface Mount Lay-In

X

Accessories EG 1SB 2SB 3SB EQT IB (note 1)

D-100 AG-100 D-75 AG-75 AG-85 AG-65

Aluminum White

XX

1 3

Note 1: Available on TMS-AA 24” x 24” full face borders 1, 2, 3, and 4. Note 2: See damper model for size availability.

XXX Optional Damper (note 4) Radial, Round Neck Radial, Round Neck Opposed Blade, Round Neck Opposed Blade, Round Neck Butterfly Combination

Accessories EG 1SB 2SB 3SB EQT IB (note 1)

Equalizing Grid, Round (1) 90 Sectorizing Baffle (2) 90 Sectorizing Baffle (3) 90 Sectorizing Baffle Earthquake Tabs Insulation Blanket



SPECIFICATIONS

Model

F

Equalizing Grid, Round (1) 90 Sectorizing Baffle (2) 90 Sectorizing Baffle (3) 90 Sectorizing Baffle Earthquake Tabs Insulation Blanket

XX-XXX

Surface Mount Snap-In Lay-In Spline


SQUARE CEILING DIFFS ROUND NECK

F121

Diffs

F

TMSA, TMSA-AA HIGH PERFORMANCE - HORIZONTAL TO VERTICAL DISCHARGE PATTERN - ADJUSTABLE Available Models: TMSA • Steel TMSA-AA • Aluminum Products Include: • Standard Finish - #26 White. • Titus Models TMSA and TMSA-AA diffs include adjustable vanes which vary the discharge pattern between vertical and horizontal. • All sizes have three cones, giving a uniform appearance where different neck sizes are used in the same area.

Ceiling Nominal Module Round Duct A Size B

C

D

E

• Screwdriver adjustment of the optional damper is achieved without removing the inner cone. (See Step 2 in Adjusting Optional Damper, Removing Center Cone diagram in this section.) • Quick removal of the inner cone with a hex key. (See Step 3 in Adjusting Optional Damper, Removing Center Cone diagram in this section.)

• Material: all sizes are available in steel (Model TMSA). Only the 24 x 24-inch ceiling module size is available in aluminum with steel bar (Model TMSA-AA).

• All cones are die-stamped, one piece construction. Smooth, clean surfaces.

• Delivers supply air in 360° pattern. Designed to help protect ceilings from streaking and smudging.

• Optional SB (sectorizing baffle) is available. Consult your Titus representative for details.

Frame Type 3 Full Face (Lay-In)

Ceiling Module A Nominal Round Duct Size B Pattern Controller Vane

12x12 4, 5 (note 2) 3⅛ 5⅜ ⅜ 12x12 6, 7 (note 3) 1⅛ 3⅜ ⅜ 12x12

8

24x24

6, 8

TMSA, TMSA-AA

24x24

F122

TMSA, TMSA-AA


Square Ceiling Diffs (continued)

B minus ⅛" C D

1¼ 3½ ⅝ 1¼

5

E

¼

10, 12, 14, 1⅜ 5⅛ ¼ 15

Notes: 1. Aluminum construction is available in full face 24” x 24” ceiling module only. Steel construction is available in all sizes. 2. Adapter is provided for sizes 4 and 5. 3. The smallest neck size available in aluminum is 6 inches.

(note 1)

Ceiling Module A minus ⅜"

Frame Type 3 Mounted (Lay-In)

Ceiling Module A Nominal Round Duct Size B B minus ⅛"

Pattern Controller Vane

C E F

(note 1)

Ceiling Module A

Ceiling Module A minus ¼"

Nominal Round Nominal Face Duct Size B Size F

C

D

E

24x24

4, 5 (note 2)

12x12

3⅛

5⅜

⅜

24x24

6, 7 (note 3)

12x12

1⅛

3⅜

⅜

24x24

8

12x12

1¼

3½

⅝


D

Diffs

PERFORMANCE DATA

4" DIa.

5" Dia.

12" x 12" 6" Module Dia. Size

7" Dia.

8" Dia.

Neck Velocity Velocity Pressure Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical

400 0.010 35 0.012 0.013 1-1-2 1-1-2 55 0.018 0.022 1-2-3 1-1-2 78 0.026 0.032 1-2-4 1-1-3 107 0.036 0.044 1-2-4 1-2-3 140 0.047 0.057 2-2-5 1-2-4 -

500 0.016 44 0.018 0.021 1-2-3 1-1-2 68 0.028 0.034 1-2-4 1-1-3 98 0.041 0.049 2-2-5 1-2-3 134 0.056 0.068 2-3-5 1-2-4 12 175 0.073 0.090 2-3-6 1-2-4 16 15

700 0.031 61 0.036 0.041 1-2-4 1-2-3 95 0.056 0.066 2-3-5 1-2-3 14 12 137 0.080 0.097 2-3-7 2-2-4 19 17 187 0.110 0.133 3-4-8 2-3-5 23 21 244 0.143 0.175 3-4-9 2-3-6 26 25

800 0.040 70 0.046 0.053 2-2-5 1-2-3 13 109 0.073 0.086 2-3-6 1-2-4 18 15 157 0.105 0.126 2-4-7 2-3-4 23 21 214 0.143 0.174 3-4-9 2-3-5 27 25 279 0.187 0.229 3-5-10 2-4-6 31 29

1000 0.062 87 0.072 0.083 2-3-6 1-2-3 20 16 136 0.114 0.135 3-4-8 2-3-4 25 22 196 0.164 0.198 3-5-9 2-3-5 30 27 267 0.223 0.272 4-5-11 3-4-6 34 31 349 0.292 0.358 4-6-12 3-4-7 37 35

1200 0.090 105 0.104 0.120 2-4-7 2-3-4 25 21 164 0.164 0.194 3-5-9 2-3-5 31 27 235 0.236 0.284 4-6-11 3-4-5 36 32 320 0.322 0.392 4-7-13 3-4-6 40 37 419 0.421 0.516 5-7-14 4-5-7 43 41

1400 0.122 122 0.142 0.164 3-4-8 2-3-4 30 26 191 0.223 0.265 4-5-10 3-3-5 36 32 274 0.321 0.387 4-7-12 3-4-6 40 37 374 0.438 0.533 5-8-14 4-5-7 44 41 489 0.573 0.702 6-9-16 4-6-8 48 45

1600 0.160 140 0.185 0.214 3-5-8 2-3-4 34 30 218 0.291 0.346 4-6-10 3-4-5 40 36 314 0.419 0.506 5-7-13 4-4-6 45 41 427 0.572 0.696 6-9-15 4-5-7 49 45 558 0.748 0.917 7-10-17 5-6-8 52 49

• NC values are based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB. • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts. • Dash (-) in space denotes an NC value of less than 10. • All pressures are given in inches of water. • To obtain static pressure, subtract the velocity pressure from the total pressure. • Horizontal throw is along a surface. • Vertical throw is a free jet.

F

PERFORMANCE DATA

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • If the diff is mounted on an exposed duct, the throw values are 70% of those listed in the table. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for the catalog throw data information.

600 0.022 52 0.026 0.030 1-2-4 1-1-3 82 0.041 0.049 2-2-5 1-2-3 118 0.059 0.071 2-3-6 1-2-4 14 12 160 0.080 0.098 2-3-7 2-2-4 18 16 209 0.105 0.129 2-4-7 2-3-5 22 20


TMSA - SQUARE CEILING - ROUND NECK - HIGH PERFORMANCE - HORIZONTAL TO VERTICAL DISCHARGE

F123

Diffs


PERFORMANCE DATA

F

TMSA - SQUARE CEILING - ROUND NECK - HIGH PERFORMANCE - HORIZONTAL TO VERTICAL DISCHARGE

6" Dia.

8" Dia.

10" Dia. 24" x 24" Module Size 12" Dia.

14" Dia.

PERFORMANCE DATA

15" Dia.

F124

Neck Velocity 400 500 600 700 800 1000 Velocity Pressure 0.010 0.016 0.022 0.031 0.040 0.062 Airflow, cfm 78 98 118 137 157 196 Total Pressure Horizontal 0.018 0.028 0.040 0.055 0.072 0.112 Vertical 0.019 0.030 0.043 0.058 0.076 0.118 Throw feet Horizontal 2-3-5 2-3-6 3-4-7 3-5-8 3-6-8 4-7-9 Vertical 0-1-1 1-1-2 1-1-2 1-1-2 1-1-3 1-1-4 NC (Noise Criteria) Horizontal 14 18 25 Vertical 13 17 24 Airflow, cfm 140 175 209 244 279 349 Total Pressure Horizontal 0.018 0.028 0.041 0.056 0.073 0.114 Vertical 0.022 0.034 0.049 0.067 0.088 0.137 Throw feet Horizontal 2 - 3 - 5 2-3-6 3-4-8 3-5-9 3-5-10 4-6-11 Vertical 0 - 1 - 1 1-1-2 1-1-2 1-1-2 1-1-3 1-2-4 NC (Noise Criteria) Horizontal 12 17 21 28 Vertical 12 16 20 27 Airflow, cfm 218 273 327 382 436 545 Total Pressure Horizontal 0.018 0.029 0.041 0.056 0.073 0.114 Vertical 0.030 0.047 0.068 0.092 0.120 0.188 Throw feet Horizontal 2-3-6 3-4-8 3-5-10 4-6-11 4-6-13 5-8-14 Vertical 1-1-2 1-1-2 1-1-3 1-2-3 1-2-4 1-2-4 NC (Noise Criteria) Horizontal 15 20 24 31 Vertical 12 18 22 26 33 Airflow, cfm 314 393 471 550 628 785 Total Pressure Horizontal 0.018 0.029 0.041 0.056 0.073 0.114 Vertical 0.040 0.063 0.090 0.123 0.161 0.251 Throw feet Horizontal 3-4-8 3-5-10 4-6-12 5-7-14 5-8-15 6-10-17 Vertical 1-1-2 1-1-3 1-2-3 1-2-4 1-2-4 2-3-5 NC (Noise Criteria) Horizontal 12 18 23 27 34 Vertical 17 23 27 31 38 Airflow, cfm 428 535 641 748 855 1069 Total Pressure Horizontal 0.029 0.045 0.065 0.089 0.116 0.181 Vertical 0.044 0.068 0.098 0.134 0.175 0.273 Throw feet Horizontal 5-8-15 6-10-19 8-11-21 9-13-22 10-15-24 13-19-27 Vertical 2-5-7 3-6-8 5-6-9 6-7-10 6-7-10 7-8-12 NC (Noise Criteria) Horizontal 12 18 23 32 Vertical 12 18 23 28 32 38 Airflow, cfm 491 614 736 859 982 1227 Total Pressure Horizontal 0.031 0.048 0.069 0.094 0.123 0.192 Vertical 0.041 0.064 0.092 0.125 0.164 0.256 Throw feet Horizontal 5-8-16 7-10-20 8-12-22 10-14-24 11-16-25 14-20-28 Vertical 2-5-8 4-6-9 5-7-10 6-7-10 6-8-11 7-9-12 NC (Noise Criteria) Horizontal 13 19 24 32 Vertical 17 22 27 31 37

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • If the diff is mounted on an exposed duct, the throw values are 70% of those listed in the table. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for the catalog throw data information. • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB.

1200 0.090 235 0.162 0.171 4-7-10 1-2-4 30 29 419 0.164 0.197 5-8-12 1-2-4 33 32 654 0.164 0.271 6-10-15 2-3-5 37 38 942 0.165 0.361 8-12-18 2-3-6 39 43 1283 0.261 0.393 15-21-29 7-9-13 39 43 1472 0.277 0.369 16-22-31 8-10-14 39 42

1400 0.122 274 0.220 0.232 4-7-11 1-2-4 35 34 489 0.223 0.269 6-9-13 2-2-5 38 37 763 0.224 0.369 8-11-17 2-3-6 41 43 1099 0.224 0.492 9-14-20 2-4-7 44 48 1497 0.355 0.535 18-22-31 8-10-14 45 48 1718 0.377 0.502 19-24-34 8-10-15 45 47

1600 0.160 314 0.287 0.303 5-8-12 1-2-5 39 38 558 0.291 0.351 7-10-14 2-3-6 42 41 872 0.292 0.482 9-13-18 2-4-7 45 47 1256 0.293 0.642 10-15-21 3-4-9 48 52 1710 0.464 0.699 19-24-34 8-10-15 50 51 1963 0.492 0.655 21-25-36 9-11-16 50 50

• Dash (-) in space denotes an NC value of less than 10. • All pressures are given in inches of water. • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts. • To obtain static pressure, subtract the velocity pressure from the total pressure. • Horizontal throw is along a surface. • Vertical throw is a free jet.

Diffs


ROUND NECK, HORIZONTAL TO VERTICAL ADJUSTABLE DISCHARGE PATTERN Available Models: TMSA • Steel TMSA-AA • Aluminum Square ceiling diffs shall be Titus Model TMSA (steel, adjustable) or TMSA-AA (aluminum with steel bar, adjustable) of the sizes and mounting types shown on the plans and outlet schedule. The TMSA and TMSA-AA models shall have three cones, which give a uniform face size and appearance when different neck sizes are used in the same area. All cones shall be one piece precision die-stamped; the back cone shall also include an integrally drawn inlet (welded-in inlets and corner ts are not acceptable). The two inner cones shall be constructed as a single, removable inner cone assembly for easy installation and cleaning. The inner cone assembly shall include adjustable vanes to

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional round damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff. The manufacturer shall provide published performance data for the square diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


Model

Module Size 12x12 (note 1) 24x24 (note 2)

Full Face, Adjustable

TMSA

XX

Neck Size 4, 5, 6, 7, 8, 10, 12, 14, 15

XX x XX

Finish 01 26 X

Border Surface Mount Snap-In Lay-In Spline

Aluminum White

XX

Accessories Equalizing Grid, Round EG (1) 90 Sectorizing Baffle 1SB (2) 90 Sectorizing Baffle 2SB (3) 90 Sectorizing Baffle 3SB Earthquake Tabs EQT XX-XXX


change the airflow discharge from fully horizontal to fully vertical. The inner cone assembly must also have a hole with removable plug in the center to allow quick adjustment of an optional inlet damper without removing the inner cone assembly. Diffs shall be constructed of 24-gauge steel (TMSA) or 0.040 aluminum (TMSA-AA).


F


1 2 3 4

D-100 AG-100 D-75 AG-75 AG-85 AG-65

Note 1: Available in neck sizes 4, 5, 6, 7, & 8 only. Note 2: Available in neck sizes 6, 8, 10, 12, 14, & 15 only. Note 3: See damper model for size availability.

Radial, Round Neck Radial, Round Neck Opposed Blade, Round Neck Opposed Blade, Round Neck Butterfly Combination

Accessories EG (1) 90 Sectorizing Baffle 1SB (2) 90 Sectorizing Baffle 2SB (3) 90 Sectorizing Baffle 3SB Earthquake Tabs EQT Equalizing Grid, Round

Full Face, Adjustable, Aluminum

TMSA-AA

XX

Neck Size 6, 8, 10, 12, 14, 15

Finish 01 26

Module Size 24 x 24

X

Border Surface Mount Lay-In

Note 3: See damper model for size availability.

XX

Aluminum White

XX-XXX


1 3

D-100 AG-100 D-75 AG-75 AG-85 AG-65

Radial, Round Neck Radial, Round Neck

SPECIFICATIONS

Model

Opposed Blade, Round Neck Opposed Blade, Round Neck Butterfly Combination

F125

Diffs

F

MCD, MCD-AA MODULAR CORE - 1, 2, 3 OR 4-WAY - ADJUSTABLE

MCD, MCD-AA


Square Ceiling Diffs (continued)

• Maintains a horizontal flow pattern from maximum to minimum cfm, making the MCD an excellent choice for variable air volume systems.

Available Models: MCD • Steel MCD-AA • Aluminum Products Include: • Standard Finish - #26 White. • Titus Model MCD modular core diff is extremely flexible; it can be adjusted for a one-, two-, three-, or four-way pattern after it has been installed.

• Optional AG-95 opposed blade damper is accessible for adjustment from the diff face by removing a core module.

• New core design results in a higher quality overall assembly, and easier changes to modular core placement.

• MCD is shipped with the modular core set for four-way discharge. • Material is heavy gauge steel (MCD) or aluminum with miscellaneous steel parts (MCD-AA).

• Now available with round neck for flex duct applications.


Ceiling Opening = Duct Size plus 3½" Duct Size Duct Size minus ⅛"

2⅛"

¼"

1" Duct Size plus 5 9/16"

Note: Two-way opposite pattern shown.

AVAILABLE BORDER TYPES

MCD, MCD-AA

Border Type 3 (Lay-ln) Ceiling Module

Border Type 6 (Beveled Drop Face) Duct Size plus 1"

Duct Size minus ⅛"


⅜" 2⅛"


F126


⅜"

2⅛"

Ceiling Module


⅞" Duct Size plus 5"

2⅛"

Diffs

DIMENSIONS

Border Types 1, 6

Border Types 3, 4 Available Module Size

Duct Sizes (inches) 6x6 8x8 10x10 12x12


AVAILABLE DUCT SIZES

14x14 22x22 6x6 14x14 16x16 24x24 8x8 16x16 18x18 10x10 18x18 20x20 12x12

24 x 24

ROUND DUCT SIZES

Border Type 3 Available Minimum Available Round Module Size A Duct Size 24 x 24

6x6 12x12

A Duct Size minus ⅛"

6 6, 8, 10, 12

F

Note: Round duct sizes are available only in sizes shown.adjustable cores.

MODULAR CORE ADJUSTMENTS

1-Way

2-Way Opposite

2-Way Corner

3-Way

4-Way

Vertical

DIMENSIONS F127

Diffs


PERFORMANCE DATA MCD, MCD-AA - SQUARE CEILING - MODULAR CORE - 1-, 2-, 3- OR 4-WAY BLOW PATTERN

6x6 Neck

8x8 Neck

10 x 10 Neck

F

12 x 12 Neck

14 X 14 Neck

PERFORMANCE DATA

16 X 16 Neck

F128

18 X18 Neck

20 X 20 Neck

Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw

300 0.006 75 0.011 8-11-16 6-9-12 5-8-12 4-5-8 133 0.013 10-15-21 8-12-16 7-11-16 5-7-10 208 0.016 13-19-27 10-14-20 9-14-19 6-9-13 300 0.020 16-23-32 12-17-24 11-16-23 7-11-15 408 0.024 18-26-37 14-20-29 13-19-27 8-13-18 533 0.029 12 21-30-42 16-23-33 14-22-31 10-14-21 675 0.035 15 28-34-48 21-26-37 20-25-35 13-16-23 833 0.041 17 31-38-53 24-29-41 22-27-39 15-18-26

400 0.010 100 0.019 10-13-18 8-10-14 7-10-13 5-6-9 178 0.023 14-17-25 11-13-19 10-13-18 6-8-12 278 0.029 17-22-31 13-17-24 12-16-22 8-11-15 400 0.035 14 21-26-37 16-20-28 14-19-27 10-13-18 544 0.043 17 24-30-43 19-23-33 17-22-31 11-15-21 711 0.052 20 28-35-49 21-27-38 19-25-36 13-17-24 900 0.062 22 32-39-55 24-30-42 23-29-40 15-19-27 1111 0.073 24 35-43-61 27-33-47 26-32-45 17-21-30

500 0.016 125 0.030 12-15-21 9-11-16 9-11-15 6-7-10 222 0.036 12 16-19-27 12-15-21 12-14-20 8-9-13 347 0.045 17 20-24-34 15-19-26 14-18-25 10-12-17 500 0.055 20 24-29-41 18-22-32 17-21-30 12-14-20 681 0.067 23 28-34-48 21-26-37 20-25-35 13-16-23 889 0.081 26 32-39-55 24-30-42 23-28-40 15-19-27 1125 0.097 28 36-44-62 27-34-47 26-32-45 17-21-30 1389 0.114 30 40-48-69 30-37-53 29-35-50 19-23-33

600 0.022 150 0.043 11 13-16-23 10-12-17 10-12-16 6-8-11 267 0.053 17 17-21-30 13-16-23 13-16-22 8-10-15 417 0.065 21 22-27-38 17-20-29 16-19-27 11-13-18 600 0.079 25 26-32-45 20-24-35 19-23-33 13-15-22 817 0.097 28 30-37-53 23-29-40 22-27-38 15-18-25 1067 0.117 31 35-42-60 27-33-46 25-31-44 17-21-29 1350 0.139 33 39-48-68 30-37-52 29-35-49 19-23-33 1667 0.165 35 43-53-75 33-41-58 32-39-55 21-26-36

700 0.031 175 0.059 15 14-17-24 11-13-19 10-13-18 7-8-12 311 0.071 21 19-23-32 14-18-25 14-17-24 9-11-16 486 0.088 26 23-29-41 18-22-31 17-21-30 11-14-20 700 0.108 29 28-34-49 22-26-37 21-25-36 14-17-24 953 0.132 32 33-40-57 25-31-44 24-29-41 16-19-28 1244 0.159 35 37-46-65 29-35-50 27-34-47 18-22-31 1575 0.190 37 42-52-73 32-40-56 31-38-53 20-25-35 1944 0.224 39 47-57-81 36-44-62 34-42-59 23-28-39

800 0.040 200 0.077 19 15-18-26 12-14-20 11-13-19 7-9-13 356 0.093 25 20-25-35 15-19-27 15-18-25 10-12-17 556 0.115 29 25-31-43 19-24-33 18-22-32 12-15-21 800 0.141 33 30-37-52 23-28-40 22-27-38 15-18-25 1089 0.172 36 35-43-61 27-33-47 26-31-44 17-21-29 1422 0.207 39 40-49-69 31-38-53 29-36-51 19-24-34 1800 0.248 41 45-55-78 35-42-60 33-40-57 22-27-38 2222 0.293 43 50-61-87 38-47-67 37-45-63 24-30-42

900 0.051 225 0.097 22 16-20-28 12-15-21 12-14-20 8-9-13 400 0.118 28 21-26-37 16-20-28 16-19-27 10-13-18 625 0.145 32 27-33-46 20-25-35 19-24-34 13-16-22 900 0.178 36 32-39-55 24-30-42 23-29-40 15-19-27 1225 0.217 39 37-46-64 29-35-49 27-33-47 18-22-31 1600 0.263 42 42-52-74 33-40-57 31-38-54 21-25-36 2025 0.314 44 48-59-83 37-45-64 35-43-60 23-28-40 2500 0.371 46 53-65-92 41-50-71 39-48-67 26-32-45

1000 1100 0.062 0.075 250 275 0.120 0.145 25 28 17-21-29 18-22-30 13-16-22 14-17-23 12-15-21 13-16-22 8-10-14 9-10-15 444 489 0.146 0.177 31 33 22-27-39 23-29-41 17-21-30 18-22-31 16-20-28 17-21-30 11-13-19 11-14-20 694 764 0.179 0.217 35 38 28-34-48 29-36-51 22-26-37 23-28-39 20-25-35 21-26-37 14-17-23 14-17-25 1000 1100 0.220 0.266 39 41 34-41-58 35-43-61 26-32-45 27-33-47 25-30-42 26-32-45 16-20-28 17-21-30 1361 1497 0.268 0.325 42 44 39-48-68 41-50-71 30-37-52 32-39-55 29-35-50 30-37-52 19-23-33 20-24-34 1778 1956 0.324 0.392 45 47 45-55-78 47-57-81 34-42-60 36-44-63 33-40-57 34-42-59 22-27-38 23-28-39 2250 2475 0.387 0.469 47 49 50-62-87 53-65-91 39-47-67 41-50-70 37-45-64 39-47-67 24-30-42 26-31-44 2778 3056 0.458 0.554 49 52 56-69-97 59-72-102 43-53-75 45-55-78 41-50-71 43-53-74 27-33-47 28-35-49

Diffs

PERFORMANCE DATA

22 X 22 Neck

24 X 24 Neck

6" Round in 6x6 Square Neck




300 0.006 1008 0.048 19 34-41-58 26-32-45 25-30-43 16-20-28 1200 0.056 20 37-45-64 28-35-49 27-33-47 18-22-31 60 0.016 3-5-10 3-5-10 2-3-7 1-2-4 60 0.007 15 1-3-9 1-2-7 1-2-6 1-2-4 105 0.008 3-6-13 3-6-12 2-5-9 2-4-7 164 0.010 5-10-18 3-7-15 2-4-10 2-4-8 236 0.014 13-17-24 8-12-18 7-11-19 2-5-12

400 0.010 1344 0.086 26 39-48-67 30-37-52 28-35-49 19-23-33 1600 0.099 28 42-52-74 33-40-57 31-38-54 21-25-36 80 0.029 15 5-7-14 4-7-11 3-5-9 1-3-5 80 0.012 22 3-6-12 2-4-9 2-4-8 1-2-5 140 0.014 5-9-17 5-8-15 4-6-12 3-5-9 218 0.019 8-13-20 5-10-18 4-7-13 3-5-10 314 0.025 12 16-19-28 10-15-21 9-14-22 4-8-15

500 0.016 1681 0.134 32 44-53-75 33-41-58 32-39-55 21-26-37 2000 0.155 34 47-58-82 37-45-63 35-42-60 23-28-40 100 0.046 19 6-9-15 6-8-12 4-6-11 2-3-7 100 0.019 26 4-7-13 3-6-10 3-5-9 2-3-6 175 0.022 15 7-11-19 7-10-17 5-8-15 4-6-10 273 0.029 14 11-16-23 8-12-20 6-8-15 4-7-11 393 0.040 18 18-22-31 13-16-23 12-17-25 6-10-17

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines of this catalog for additional information. • Dash (-) in space denotes an NC value of less than 10. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for the catalog throw data information.

600 0.022 2017 0.193 37 48-58-83 37-45-64 35-43-60 23-28-40 2400 0.224 39 52-64-90 40-49-69 38-47-66 25-31-44 120 0.066 23 7-10-17 7-10-14 5-7-12 3-4-8 120 0.027 30 6-9-15 4-7-11 4-6-10 2-4-7 209 0.032 19 9-13-21 8-12-18 6-9-17 5-7-11 327 0.042 18 13-18-25 10-15-22 7-10-16 5-8-12 471 0.057 23 19-24-34 15-18-26 14-19-27 8-12-18

700 0.031 2353 0.263 41 51-63-89 40-49-69 38-46-65 25-31-43 2800 0.304 43 56-69-97 43-53-75 41-50-71 27-33-47 140 0.089 26 8-12-18 8-10-15 5-8-13 3-5-9 140 0.037 33 7-10-16 5-8-12 5-7-11 3-4-8 244 0.043 22 10-15-23 9-14-20 7-11-18 5-8-12 382 0.057 22 15-19-27 11-17-24 8-12-18 6-9-13 550 0.078 26 21-26-36 16-20-28 16-21-29 10-14-20

800 0.040 2689 0.343 45 55-67-95 42-52-73 40-49-70 27-33-46 3200 0.398 47 60-74-104 46-57-80 44-54-76 29-36-50 160 0.117 28 9-14-20 9-11-16 6-9-14 3-5-10 160 0.048 36 8-12-17 6-9-13 5-8-12 3-5-8 279 0.056 25 12-17-24 10-15-21 8-12-19 6-9-12 436 0.074 25 17-20-29 13-18-26 9-13-19 7-10-14 628 0.101 30 22-28-39 17-21-29 18-22-31 11-15-21

900 0.051 3025 0.434 48 58-72-101 45-55-78 43-52-74 28-35-49 3600 0.503 50 64-78-110 49-60-85 47-57-81 31-38-53 180 0.148 30 10-15-21 10-12-17 7-10-14 4-6-10 180 0.061 39 9-13-18 7-10-14 6-9-12 4-5-9 314 0.071 27 13-18-26 12-16-22 9-14-20 7-9-13 491 0.094 28 18-22-31 15-19-27 10-14-20 8-10-14 707 0.128 33 24-29-41 18-22-31 19-23-33 12-16-22

1000 0.062 3361 0.536 51 62-75-107 47-58-82 45-55-78 30-37-52 4000 0.621 53 67-82-116 52-63-89 49-60-85 33-40-56 200 0.182 33 12-15-22 10-12-18 8-11-15 4-7-11 200 0.075 41 10-13-19 8-10-14 7-9-13 4-6-9 349 0.088 29 15-19-27 13-17-24 10-15-22 8-10-14 545 0.116 31 19-23-32 16-20-29 11-15-21 9-11-15 785 0.158 35 25-31-44 19-23-33 20-25-35 14-17-23

1100 0.075 3697 0.648 53 65-79-112 50-61-86 47-58-82 31-38-54 4400 0.752 55 70-86-122 54-66-94 51-63-89 34-42-59 220 0.221 34 13-16-23 11-13-18 9-11-16 5-7-11 220 0.091 43 11-14-20 8-11-15 7-10-14 4-7-9 384 0.106 31 16-20-28 14-18-25 11-16-23 8-10-15 600 0.140 33 19-24-34 17-21-30 12-16-22 9-11-16 864 0.192 38 26-32-46 20-24-35 21-26-37 14-17-25

• NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB. • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts. • All pressures are given in inches of water. • To obtain static pressure, subtract the velocity pressure from the total pressure.

F

PERFORMANCE DATA


Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1-way Throw 2-way Throw 3-way Throw 4-way Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1-way Throw 2-way Throw 3-way Throw 4-way Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1-way Throw 2-way Throw 3-way Throw 4-way Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1-way Throw 2-way Throw 3-way Throw 4-way Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1-way Throw 2-way Throw 3-way Throw 4-way Throw


MCD, MCD-AA - SQUARE CEILING - MODULAR CORE - 1-, 2-, 3- OR 4-WAY BLOW PATTERN

F129

Diffs



F

SQUARE CEILING DIFFS MODULAR CORE ADJUSTABLE Available Models: MCD MCD-AA


Ceiling diffs shall be Titus Model MCD (steel) or MCD-AA (aluminum) modular core diffs. The diff backpan shall be one piece stamped heavy gauge steel of the sizes and mounting types shown on the plans and outlet schedule. The diff neck shall have at least a 1-inch depth for easy duct connection.

The manufacturer shall provide published performance data for the modular core diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


XX x XX

Neck Size

Model MCD MCD-AA XXX-XX

Border 1 6

Steel Aluminum

XXX-XX

Aluminum White

Steel - Square/Round Neck Aluminum - Square/Round Neck

XX x XX

XX x XX

6x6, 8x8, 10x10, 12x12, 14x14, 16x16, Neck Size 18x18

Accessories EQT

Surface Mount Beveled

X

6x6, 8x8, 10x10, 12x12, 14x14, 16x16, 18x18, 20x20, 22x22, 24x24

Round Neck 6, 8, 10, Size 12

SPECIFICATIONS

Optional damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff.

The diff core shall consist of fixed louver directional modules, which can be easily repositioned without tools in the field for one-, two-, three- or four-way discharge. Each module shall be easily removable to adjust an optional damper in the neck of the diff.

Model MCD MCD-AA

F130

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied.

Earthquake Tabs

XX

XX-XX

01 26 Finish

AG-95 AG-95-AA

Border 3 4

XXX Optional Damper Steel Opposed Blade Aluminum Opposed Blade

Accessories EQT

Lay-In Spline

X Aluminum White

Earthquake Tabs

XX

XX-XX

01 26 Finish

AG-95 AG-95-AA

XXX Optional Damper Steel Opposed Blade Aluminum Opposed Blade

Note: Round Neck option only available for 6 x 6, 12 x 12 border 3 models. See G127 for availability.

Diffs

Architectural Ceiling Diffs

Available Models: OMNI • Steel OMNI-AA • Aluminum Products Include: • Standard Finish - #26 White.

• The OMNI diff is an excellent choice for variable air volume systems. The air pattern remains tight and horizontal for effective room air distribution, even when the volume varies over a wide range.

• The Titus OMNI diff satisfies architectural as well as engineering criteria. Its strong, clean, unobtrusive lines harmonize with the ceiling system, without sacrificing performance. • The curvature of the OMNI backpan works with the formed edges of the face to deliver a uniform 360° horizontal air pattern, without excessive noise or pressure drop.

• The face is constructed from 22-gauge steel or heavy gauge aluminum. The edgesof the face are formed to a radius for a solid, crisp appearance. The formed edges also stiffen the face and assure a straight and level surface. • The formed edges of the face capture another 22-gauge steel or heavy gauge aluminum that the hanger brackets are mechanically fastened to. This process provides the OMNI face with a smooth finish under any lighting conditions.

Frame Type 3 (Lay-In) Full Face

OMNI, OMNI-AA

SQUARE PLAQUE

• The OMNI-AA is entirely constructed of aluminum, perfect for MRI applications. • The face is held in place by four hook brackets that positively engage into slots in the backpan. The can be removed from the backpan for easy installation of the diff or for access to the optional damper. • The new face construction ensures a smooth, clean appearance and easier installation and removal. • Optional factory-insulated R-6 foil-backed insulation available for 24 x 24-inch full face models, neck sizes 6-15, borders 1, 2, 3 and 4.


OMNI, OMNI-AA

F

Inlet View Ceiling Module A Nominal Round Duct Size B B minus ⅛"

C D ¼"

Inlet View Showing Flex Duct Connection and T-Bars by Others

E Ceiling Module A minus ¼"

Nominal Round C D E Duct Size B 4, 5 (note 1) 2⅞ 4 12 x 12 9 6, 7 1⅛ 2¼ (note 2) 8 1¼ 2⅜ 4, 5 (note 1) 2¾ 5¼ 20 x 20 13⅝ 6, 8, 10 ¾ 3¼ 6, 8 1¼ 3¾ 24 x 24 18 10, 12, 14, 15 1⅜ 3⅞ Note 1: Adapter is provided for sizes 4 and 5. Note 2: 12 x 12-inch module is available in steel only. All dimensions are in inches.

OMNI, OMNI-AA

Ceiling Module A

F131

Diffs


DIMENSIONS ADDITIONAL FRAME TYPES Frame Type 1 (Surface Mount) Full Face

Frame Type 2 (Snap-In) Full Face or Mounted

Ceiling Module A

Ceiling Module A

Ceiling Module A plus 1¼" Ceiling Module A minus 1"

⅜" ⅜"

⅛" 13

Frame Type 4V - (Recessed Spline) - Full Face

/16"

Ceiling Module A Recessed Spline Tile

½"

11/8"

¼"

¼"

Note: If Border 4V is adjacent to a light fixture a gap will be visible above the backpan. A T-bar extender is available to fill this void, available from the ceiling manufacturer.

Available Model: DB

Borders 4V and 4T have four mounting clips. Two clips on opposed sides with holes to attach mounting wire from above.

DB Clips to Rods

• Converts OMNI diff from standard 4-way blow to 1-, 2- or 3-way.

DIMENSIONS

• Clips attach to hanger brackets on upper face of center .

F132

Clip-On Recessed Spline Tile

Cable Hole

Cable Hole

OPTIONAL DIRECTIONAL BLOW CLIPS

Mounting Hardware by others

Frame Type 4T - (Clip-On Recessed Spline) - Full Face

Ceiling Module A

F

Frame Type 4 (Spline) Full Face or Mounted

Center

Diffs

DIMENSIONS

Duct Size plus 2 R-6 Fiberglass Duct Size


OPTIONAL MOLDED INSULATION BLANKET

Insulation is R-6 where blanket has the most depth. One inch clearance on each side of neck is left for insulated duct connection. 24 x 24-inch full face models only.

REMOVING AND REPLACING FACE - ADJUSTING OPTIONAL DAMPER Installing Face 1. Insert the hook brackets into the slots in the backpan. 2. Rotate the face clockwise until... 3. The hooks positively engage in the secondary slots in the backpan.

1.

2.

Removing Face 1. Lift the faceplate towards the backpan to disengage the hook brackets from the backpan slots. 2. Rotate the faceplate counterclockwise. 3. Lower the faceplate away from the backpan.

Adjusting Optional Damper 1. Remove face as above. 2. Use flat blade screwdriver to turn operator shaft at center of damper. 3. Replace face .


DIMENSIONS

3.

F

F133

Diffs

OMNI, OMNI-AA - ARCHITECTURAL CEILING - SQUARE PLAQUE

4" Round Neck

12"x12" Module Size


PERFORMANCE DATA

5" Round Neck

6" Round Neck

7" Round Neck

F


8" Round Neck

6" Dia.

8" Dia.

10" Dia.

6" Round Neck

F134

24"x24" Module Size

PERFORMANCE DATA

8" Round Neck 10" Round Neck 12" Round Neck 14" Round Neck 15" Round Neck

Neck Velocity Velocity Pressure Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria)

400 0.010 35 0.034 1-2-3 55 0.040 2-2-5 78 0.049 2-3-6 107 0.058 3-4-8 140 0.070 3-5-9 78 0.016 1-1-3 140 0.019 1-2-4 218 0.024 3-4-6 78 0.011 1-1-4 140 0.018 2-3-6 218 0.027 3-4-8 314 0.038 4-5-11 428 0.051 4-7-13 491 0.058 5-7-15 -

500 0.016 44 0.053 1-2-4 68 0.063 2-3-6 98 0.076 3-4-8 134 0.091 3-5-9 175 0.109 4-6-11 98 0.025 1-1-4 175 0.030 2-3-6 273 0.038 3-4-7 98 0.017 1-2-4 175 0.028 2-4-7 273 0.042 3-5-10 393 0.059 5-7-14 535 0.079 6-8-16 614 0.090 6-9-17 -

600 700 800 0.022 0.031 0.040 52 61 70 0.076 0.103 0.134 2-2-5 2-3-6 2-3-6 12 17 21 82 95 109 0.091 0.124 0.161 2-3-7 3-4-8 3-5-9 12 17 21 118 137 157 0.109 0.149 0.194 3-5-9 4-5-11 4-6-12 12 17 21 160 187 214 0.131 0.178 0.233 4-6-11 4-7-13 5-8-15 12 17 21 209 244 279 0.156 0.213 0.278 5-7-14 5-8-16 6-9-18 12 17 21 118 137 157 0.036 0.049 0.063 16 20 1-2-4 1-3-5 1-3-6 209 244 279 0.043 0.058 0.075 18 22 2-4-6 3-4-7 3-5-7 327 382 436 0.055 0.074 0.096 18 23 4-5-8 4-6-8 5-6-9 118 137 157 0.025 0.034 0.044 1-3-5 2-3-6 2-4-7 13 209 244 279 0.040 0.055 0.072 3-4-9 3-5-10 4-6-12 12 17 327 382 436 0.060 0.082 0.107 4-6-12 5-7-13 5-8-14 15 20 471 550 628 0.085 0.115 0.151 5-8-15 6-9-16 7-11-17 12 18 23 641 748 855 0.114 0.155 0.202 7-10-17 8-12-19 9-13-20 14 20 25 736 859 982 0.130 0.177 0.231 7-11-19 9-13-20 10-15-22 15 21 26


900 0.051 79 0.170 2-4-7 24 123 0.204 3-5-10 24 176 0.246 5-7-14 24 240 0.295 6-9-17 24 314 0.352 7-10-19 24 173 .080 24 2-3-6 314 .096 26 3-5-8 491 .123 27 5-7-9 176 0.056 3-4-8 17 314 0.091 4-6-12 21 491 0.136 6-9-15 24 707 0.191 8-12-18 27 962 0.256 10-15-21 29 1104 0.292 11-16-23 30

1000 0.062 87 0.210 3-4-8 27 136 0.252 4-6-12 28 196 0.303 5-8-15 28 267 0.364 6-9-18 28 349 0.434 8-11-20 28 196 0.100 28 2-4-7 349 0.118 30 4-6-8 545 0.151 31 6-7-10 196 0.069 3-4-9 21 349 0.112 5-7-13 25 545 0.168 7-10-16 28 785 0.235 9-14-19 31 1069 0.316 11-16-23 33 1227 0.360 12-17-24 34

1200 0.090 105 0.303 3-5-10 33 164 0.363 5-7-14 33 235 0.437 6-9-17 33 320 0.524 8-11-20 33 419 0.626 9-14-22 33 235 0.142 34 3-5-8 419 0.169 36 5-6-9 654 0.215 37 6-8-11 235 0.099 4-5-11 28 419 0.162 6-9-14 32 654 0.241 8-12-18 35 942 0.339 11-15-21 38 1283 0.455 13-17-25 40 1472 0.519 15-19-26 41

1400 0.122 122 0.412 4-6-11 38 191 0.494 5-8-15 38 274 0.594 7-11-18 38 374 0.714 9-13-21 38 489 0.852 11-16-24 38 274 0.193 39 3-5-8 489 0.229 41 5-7-10 763 0.292 42 7-9-12 274 0.135 4-6-11 34 489 0.220 7-10-15 38 763 0.329 10-13-19 41 1099 0.461 13-16-23 43 1497 0.619 15-19-27 45 1718 0.706 17-20-29 46

PERFORMANCE DATA

• NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB. • Dash (-) in space denotes an NC value of less than 10. • Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts. • All pressures are given in inches of water. • To obtain static pressure, subtract the velocity pressure from the total pressure.


• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • If the diff is mounted on an exposed duct, the throw values are 70% of those listed in the table. • Throw values are given for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for catalog throw data information.

Diffs

F


Diffs



F

ARCHITECTURAL CEILING DIFFS SQUARE PLAQUE Available Models: OMNI • Steel OMNI-AA • Aluminum Architectural square ceiling diffs shall be the Titus Model OMNI (steel) or OMNI-AA (aluminum) diff of the sizes and mounting types shown on the plans and outlet schedule. The OMNI diff shall have an 22-gauge steel face that captures a secondary 22-gauge . The OMNI-AA shall have a heavy gauge aluminum face that captures a secondary heavy gauge aluminum . The OMNI-AA is entirely aluminum and will perform in MRI applications. The face is removable by means of four hanger brackets. The exposed surface of the face shall be smooth, flat, and free of visible fasteners. The face shall project ¼ inch below the outside border of the diff backpan. s projecting more than ¼ inch below the outside border are not acceptable. The back of the face shall have an aerodynamically shaped, rolled edge to ensure a tight horizontal discharge pattern. A single metal thickness on the edges of the face will not be accepted. Ceiling diffs with a 24 x 24inch full face shall have no less than an 18 x 18-inch face size. Ceiling diffs with a 12 x 12-inch full face shall have no less than a 9 x 9-inch face size.

The backpan shall be one piece precision die-stamped and shall include an integrally drawn inlet (welded-in inlets and corner ts are not acceptable). The diff backpan shall be constructed of 22-gauge steel (OMNI) or aluminum (OMNI-AA). The diff neck shall have a minimum of 1¼inch depth available for duct connection. The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional round damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff. Optional Directional Blow clips shall be available to restrict the discharge air in certain directions. Optional molded insulation blanket shall be available. The insulation will be R-6, foil-backed, and provide an additional 1-inch gap around the neck to install insulated flex duct. The manufacturer shall provide published performance data for the square diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


Model Full Face, Steel

OMNI

Surface Mount Snap-In Lay-In Spline Clip-On Recessed Spline Recessed Spline

Border 1 2 3 4 4T 4V

XX

Neck Size 6, 8, 10, 12, 14, 15

XX Module Size

Aluminum White

XX x XX

Finish 01 26 XX

12 x 12 (note 2) 20 x 20 (note 4) 24 x 24 (note 3)

SPECIFICATIONS

Model Full Face, Aluminum

OMNI-AA

XX

Neck Size 6, 8, 10, 12, 14, 15

F136

Border 1 2 3 4 X Module Size

Aluminum White

AG-100 D-75 AG-75 AG-85 AG-65

Finish 01 26

XX x XX 20 x 20 24 x 24

Note 1: Available with 24” x 24” full face models, neck sizes 6-15, borders 1, 2, 3 or 4. Note 2: See damper model for size availability.

XX

Accessories EG 1DB 2DB 3DB EQT IB (note 1)

XX-XXX D-100

Note 1: Available with 24” x 24” full face models, neck sizes 6-15, borders 1, 2, 3 or 4. Note 2: Available in neck sizes 4, 5, 6, 7 & 8 only. Note 3: Available in neck sizes 6, 8, 10, 12, 14 & 15 only. Note 4: Availabe in neck sizes 4, 5, 6, 8, & 10 only. Note 5: See damper model for size availability.

Surface Mount Snap-In Lay-In Spline

Equalizing Grid, Round (1) Directional Blow Clips (2) Directional Blow Clips (3) Directional Blow Clips Earthquake Tabs Insulated Backpan


Equalizing Grid, Round (1) Directional Blow Clips (2) Directional Blow Clips (3) Directional Blow Clips Earthquake Tabs Insulated Backpan


Accessories EG 1DB 2DB 3DB EQT IB (note 1) XXX

Optional Damper (note 2) Radial, Round Neck Radial, Round Neck Opposed Blade, Round Neck Opposed Blade, Round Neck Butterfly Combination

Diffs

Architectural Ceiling Diffs (continued)

SQUARE PLAQUE, NARROW TEE Available Models: OMNI-NT • Steel OMNI-AA-NT • Aluminum For Performance Data please refer to page F134 and for Performance Notes, please refer to page F135. • The OMNI-NT and OMNI-AA-NT has strong, clean lines that harmonize with the ceiling system, yet performance is not sacrificed.

• Meets architectural and engineering criteria.

• The curvature of the OMNI-NT and OMNI-AA-NT backpan works with the aerodynamically formed edge of the face to provide a tight 360° pattern.

• The face is constructed from 22-gauge steel or heavy gauge aluminum. The edgesof the face are formed to a radius for a solid, crisp appearance. The formed edges also stiffen the face and assure a straight and level surface.


OMNI-NT, OMNI-AA-NT

OMNI-NT, OMNI-AA-NT

F

Nominal Round Duct Size B B minus ⅛" C ⅜" D

18" 23⅜" 24"

D 3¾ 3⅞

OMNI-NT, OMNI-AA-NT

Nominal Round Duct C Size B 6, 8 1¼ 24 x 24 10, 12, 14, 15 1⅜

Ceiling Module A

¼"

F137

Diffs



F


The backpan shall be one piece precision die-stamped and shall include an integrally drawn inlet (welded-in inlets and corner ts are not acceptable). The diff backpan shall be constructed of 22-gauge steel (OMNI-NT) or of heavy gauge aluminum (OMNI-AA-NT). The diff neck shall have a minimum of 1⅛-inch depth available for duct connection.

SQUARE PLAQUE, NARROW TEE Models: OMNI-NT OMNI-AA-NT Architectural square ceiling diffs shall be the Titus Model OMNI-NT or OMNI-AA-NT diff of the sizes and mounting type shown on the plans and outlet schedule. The diff shall be compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems. The OMNI-NT diff shall have an 22-gauge backpan and steel face , which shall be removable. The OMNI-AA-NT shall be constructed entirely of heavy gauge aluminum. The exposed surface of the face shall be smooth, flat and free of visible fasteners. The face shall project ¼ inch below the outside border of the diff backpan. s projecting more than ¼ inch below the outside border are not acceptable. The back of the face shall have an aerodynamically shaped, rolled edge to ensure a tight horizontal discharge pattern. A single metal thickness on the edges of the face will not be accepted. Ceiling diffs with a 24 x 24-inch full face shall have no less than an 18 x 18-inch face size. Ceiling diffs with a 12 x 12-inch full face shall have no less than a 9 x 9-inch face size.

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional round damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff. Optional down blow clips shall be available to restrict the discharge air in certain directions. The manufacturer shall provide published performance data for the square diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

MODEL NUMBER SPECIFICATION Equalizing Grid, Round (1) Directional Blow Clips

Model OMNI-NT Steel OMNI-AA-NT Aluminum XXXX-XX-XX

XX

SPECIFICATIONS

Neck Size 6, 8, 10, 12, 14, 15

F138

(2) Directional Blow Clips

Module Size 24x24

(3) Directional Blow Clips Earthquake Tabs

XX

Aluminum White

Note 2: See damper model for size availability.

01 26 Finish

XX-XX

Accessories EG 1DB 2DB 3DB EQT XXX

Optional Damper (note 2)

D-100 AG-100 D-75 AG-75 AG-85 AG-65


Diffs


Available Model: R-OMNI • Steel Products Include: • Standard Finish - #26 White.

R-OMNI

• R-Omni’s completely smooth face is adjustable in three positions for horizontal or vertical flow. Can be used effectively in heating or cooling applications.

ROUND PLAQUE - STEEL

• Uniform 360º discharge pattern.

• The Titus R-Omni - a great look in circular diffs designed for architectural ceilings and facilities with exposed ductwork.


• Spring lock allows easy removal and replacement of the plaque assembly.

• Optional Type B outer cone for reducing ceiling smudging.

• Material is heavy gauge steel.

Ceiling Opening Diameter B Nominal Round Duct D


R-OMNI

F

Outer Cone

Web Plaque

Ceiling Level

Outside Diameter C

Model B Outer Cone (optional)

Outside Diameter F Ceiling Opening Diameter B Nominal Round Duct Size D

X Model B Outer Cone

B

C

P*

X

6 8 10 12 14

12 16 20 24 28

13½ 18 22½ 27 31⅛

½ ½ ½ 11 /16 13 /16

115/16 2⅝ 3¼ 3⅞ 49/16

Type B Cone BB BC 7 17¾ 9 23¼ 11 29 13 34⅞ 14 40⅝

R-OMNI


Note: The plaque frame on model R-Omni projects above the neck of the diff. The maximum projection is Dimension P. All dimensions are in inches.

F139

Diffs


PERFORMANCE DATA R-OMNI - ARCHITECTURAL CEILING - ROUND PLAQUE Positions Center

6"

Down

Up

Positions

50 50 50 50

Center Down 8"

F

Up

Positions

50 50 50 50

Center Down 10" Up

Positions

50 50 50 50

Center Down

PERFORMANCE DATA

12" Up

Positions Center Down 14" Up

F140

50 50 50 50

50 50 50 50

Neck Velocity, fpm Velocity Pressure, In WG Air Flow, cfm Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure NC ( Noise Criteria) fpm Vert. Proj., Ft @ 10º F Heating fpm Vert. Proj., Ft @ 20º F Heating fpm Vert. Proj., Ft @ 30º F Heating fpm Vert. Proj., Ft @ 40º F Heating Air Flow, cfm Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure NC ( Noise Criteria) fpm Vert. Proj., Ft @ 10º F Heating fpm Vert. Proj., Ft @ 20º F Heating fpm Vert. Proj., Ft @ 30º F Heating fpm Vert. Proj., Ft @ 40º F Heating Air Flow, cfm Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure NC ( Noise Criteria) fpm Vert. Proj., Ft @ 10º F Heating fpm Vert. Proj., Ft @ 20º F Heating fpm Vert. Proj., Ft @ 30º F Heating fpm Vert. Proj., Ft @ 40º F Heating Air Flow, cfm Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure NC ( Noise Criteria) fpm Vert. Proj., Ft @ 10º F Heating fpm Vert. Proj., Ft @ 20º F Heating fpm Vert. Proj., Ft @ 30º F Heating fpm Vert. Proj., Ft @ 40º F Heating Air Flow, cfm Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure NC ( Noise Criteria) fpm Vert. Proj., Ft @ 10º F Heating fpm Vert. Proj., Ft @ 20º F Heating fpm Vert. Proj., Ft @ 30º F Heating fpm Vert. Proj., Ft @ 40º F Heating

400 0.010 79 0.017 2-4-8 0.012 1-3-6 0.026 2 2 1 1 140 0.019 2-3-6 0.014 2-3-5 0.040 6 5 5 4 218 0.019 3-4-8 0.015 3-4-8 0.028 7 7 6 5 314 0.022 15 5-7-14 0.016 10 4-6-11 0.033 10 8 8 7 7 428 0.015 4-6-12 0.011 3-6-12 0.022 10 10 9 9

500 600 700 800 900 1000 1200 0.016 0.022 0.031 0.040 0.051 0.062 0.090 98 118 137 157 177 196 236 0.027 0.039 0.053 0.070 0.088 0.109 0.156 13 17 21 24 30 2-5-9 3-6-10 5-7-10 5-8-11 6-8-12 6-9-12 8-10-14 0.018 0.026 0.036 0.047 0.049 0.073 0.105 12 17 20 27 2-4-7 3-5-8 4-6-9 4-6-9 5-7-10 5-7-10 6-8-11 0.041 0.059 0.080 0.105 0.132 0.164 0.235 10 15 19 22 25 31 3 4 5 6 7 8 10 3 4 5 6 7 8 9 2 3 4 5 6 7 8 2 2 3 4 5 6 7 175 209 244 279 314 349 419 0.029 0.042 0.057 0.075 0.095 0.117 0.168 12 16 20 24 30 3-4-8 3-5-9 4-5-10 4-6-11 5-7-12 5-8-12 6-9-13 0.021 0.031 0.042 0.055 0.070 0.086 0.124 13 17 21 27 3-4-8 3-5-9 4-5-10 4-6-11 5-7-12 5-8-12 6-9-13 0.062 0.089 0.121 0.158 0.200 0.247 0.355 10 15 20 25 28 35 7 8 9 10 11 12 14 6 7 8 9 10 11 13 6 7 8 9 9 10 12 5 6 7 8 9 10 12 273 327 382 436 491 545 654 0.030 0.043 0.059 0.077 0.098 0.121 0.174 14 19 23 27 30 35 3-5-10 4-6-11 5-7-12 5-8-13 6-9-13 6-10-14 8-11-16 0.024 0.034 0.046 0.060 0.076 0.094 0.136 13 18 23 27 34 3-5-10 4-6-11 5-7-12 5-8-13 6-9-13 6-10-14 8-11-16 0.044 0.064 0.087 0.114 0.144 0.178 0.256 16 21 27 31 39 8 9 10 11 12 13 15 8 9 9 10 11 12 14 7 8 9 10 10 11 13 6 7 8 9 10 11 13 393 471 550 628 707 785 942 0.034 0.048 0.066 0.086 0.109 0.134 0.194 19 22 25 27 30 32 35 6-9-16 7-10-17 8-12-18 9-14-20 10-15-21 11-16-22 14-17-24 0.025 0.036 0.049 0.064 0.081 0.100 0.144 15 19 22 25 28 30 34 5-7-14 6-8-16 6-10-17 7-11-18 8-13-19 9-14-20 11-16-22 0.052 0.074 0.101 0.132 0.167 0.206 0.297 15 20 23 27 29 32 36 9 11 12 13 15 16 18 9 10 11 13 14 15 17 8 9 10 12 13 14 17 8 9 10 12 13 14 16 535 641 748 855 962 1069 1283 0.024 0.034 0.046 0.061 0.077 0.095 0.137 13 18 23 26 30 33 38 5-8-14 6-9-15 7-11-16 8-12-17 9-13-18 10-14-19 12-15-21 0.016 0.024 0.032 0.042 0.053 0.066 0.094 12 17 21 25 28 31 36 5-8-14 6-9-16 7-11-17 8-12-18 9-14-19 10-14-20 9-13-19 0.034 0.050 0.067 0.088 0.112 0.138 0.198 15 20 24 28 31 34 39 12 14 15 17 19 21 24 12 13 15 17 19 20 24 11 13 14 16 18 20 24 11 12 14 16 18 19 23

For Performance notes, please refer to page F141.

1400 0.122 275 0.213 34 8-10-15 0.143 33 7-9-12 0.321 35 12 11 10 9 489 0.229 35 7-10-15 0.168 33 7-10-15 0.484 41 16 15 14 14 764 0.237 40 9-12-17 0.185 39 9-12-17 0.348 46 17 16 15 15 1100 0.263 38 15-18-26 0.196 37 13-17-24 0.404 40 21 20 20 19 1497 0.186 42 13-16-23 0.129 40 14-17-24 0.270 43 28 28 28 27

PERFORMANCE DATA

• Return NC is 2 NC higher than supply NC at the same cfm. • Horizontal throw values are for terminal velocities of 150, 100 and 50 fpm under isothermal conditions. • If mounted on an exposed duct, the throw values are 70% of those listed in the table. • Vertical projections are for terminal velocity of 50 fpm in heating mode. • NC values based on a room absorption of 10 dB. • Dash (-) in space indicates NC value less than 10.


• All data, except vertical projection, was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. • Vertical projection data was calculated from computational fluid dynamics models. • All data based upon supply performance. • All pressures are in inches of water. • Diffs are shipped in center position. • To obtain static pressure, subtract the velocity pressure from the total pressure. • The negative static pressure for return performance is equal to the total pressure of supply at the same cfm.

Diffs

F


Diffs



F


Optional round damper shall be constructed of heavy gauge steel. Damper must be operable from behind the removable plaque. A retainer cable shall be provided to allow the plaque assembly to hang during maintenance of diffs.

ROUND PLAQUE Available Model: R-OMNI Architectural round plaque ceiling diffs shall be the Titus Model R-Omni of the sizes and mounting types shown on the plans and outlet schedule. Round outer cone shall be constructed of 18-gauge steel and heavy gauge aluminum plaque face. The exposed surface of the plaque shall be smooth and flat. The airflow discharge pattern shall be field adjusted from horizontal to vertical by repositioning the plaque assembly using the adjusting screws. The plaque assembly shall be constructed as a single inner assembly and must be easily removable using a spring lock mechanism.

Aluminum

Model

White

Adjustable, Steel

Black

XX

Neck Size 6, 8, 10, 12, 14

Finish 01 26 84 XX

Accessories EG Outer Cone - Steel B Earthquake Tabs EQT

Equalizing Grid, Round

XX-XXX

AG-100 AG-75 AG-85 AG-65 Note: See damper model for size availability.

SPECIFICATIONS

The manufacturer shall provide published performance data for the round diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


R-OMNI

F142

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315ºF for 30 minutes. The pencil harness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Testing without creepage, blistering or deterioration of film. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied.

XXX Optional Damper (note) Radial, Round Neck Opposed Blade, Round Neck Butterfly Combination

Diffs


SQUARE BACKPAN, ROUND PLAQUE - STEEL OMNI-RS

Available Model: OMNI-RS • Steel Products Include: • Standard Finish - #26 White. • The OMNI-RS diff is designed for an architectural look and engineered performance. Its clean, unobtrusive lines harmonize with ceiling systems without sacrificing performance.

• The OMNI-RS provides excellent performance in variable air volume systems. • The OMNI-RS is constructed of heavy gauge steel.

• The unique round plaque face/square combination delivers a 360B tight horizontal air pattern without excessive noise or pressure drop.

Border Type 3 (Lay-in)

1⅞

D

2

315/16


OMNI-RS

F

13

½

Ceiling Module Size

½


½" to ⅞" 3/16"

1⅛"

Module Size

24 x 24

Nominal Duct Size

D

6

5⅞

8

7⅞

10

9⅞

12

11½ All dimensions are in inches.

OMNI-RS

Note: Diff will be shipped with Border 3. A TRM frame will be provided for surface mounting.

F143

Diffs


PERFORMANCE DATA

PERFORMANCE DATA

F

F144

OMNI-RS - ARCHITECTURAL CEILING - SQUARE BACKPAN - ROUND PLAQUE

6" Dia.

8" Dia. 24 x 24 Module 10" Dia.

12" Dia.

Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw

300 0.006 59 0.017 1-2-5 105 0.025 2-4-8 164 0.035 2-6-10 216 0.037 3-5-10

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines of this catalog for additional information. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for the catalog throw data information.

400 0.010 80 0.031 1-3-6 140 0.045 2-5-9 218 0.062 3-7-11 289 0.066 5-7-12

500 0.016 98 0.048 2-4-7 175 0.07 3-6-10 273 0.096 4-8-12 361 0.104 6-8-13

600 700 800 0.022 0.031 0.040 118 137 157 0.070 0.095 0.124 12 16 21 2-4-7 3-5-8 4-6-9 209 244 279 0.101 0.138 0.180 12 16 21 4-7-10 5-8-11 6-9-12 327 382 436 0.139 0.189 0.247 12 16 21 5-9-13 6-10-14 7-12-15 433 505 577 0.149 0.203 0.265 13 17 22 7-10-14 8-11-15 10-12-17

1000 0.062 196 0.194 31 5-7-10 349 0.279 31 7-10-14 545 0.375 32 9-13-17 721 0.423 32 12-15-19


Diffs


have a round draw transition from the face to the flat top on which the inlet is located. Square drawn transitions shall not be accepted. The diff backpan shall be constructed of 22-gauge steel. The diff neck shall have a minimum of 1⅞-inch depth available for duct connection.

SQUARE BACKPAN, ROUND PLAQUE Available Model: OMNI-RS Architectural round ceiling diffs shall be the Titus model OMNI-RS diff of the sizes and mounting types shown on the plans and outlet schedule. The OMNI-RS diff shall have a 22-gauge steel face. The round face is removable by means of three screw posts. The exposed surface of the face shall be smooth, flat and free of visible fasteners. The face shall project ½-inch below the outside border of the diff backpan. s projecting more than ½-inch below the outside border are not acceptable. The back of the face shall have a formed edge, providing visual enhancement. A single metal thickness on the edges of the face will not be accepted. The diff shall be shipped with the round face factory-assembled to the backpan.

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional round damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff. The manufacturer shall provide published performance data for the square diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

The backpan shall be one piece precision die-stamped and shall include a welded inlet ring. The diff backpan shall



F


Surface Mount Lay-In

Steel

OMNI-RS

XX

Neck Size 6, 8, 10, 12

Border 1 3 XX Module Size

Aluminum White

XX x XX

Finish 01 26 XX

Equalizing Grid, Round Earthquake Tabs

Accessories EG EQT

XX-XXX


24 x 24


D-100 AG-100 D-75 AG-75 AG-85 AG-65


SPECIFICATIONS F145

Diffs

F

DAT LOUVERED PLAQUE - STEEL Available Model: DAT • Supply Products Include: • Standard Finish - #26 White.

DAT



• The Titus DAT ceiling diff satisfies architectural as well as engineering criteria. Its smooth plaque face allows the diff to harmonize with the ceiling system, without sacrificing performance.

• Fits 24 x 24-inch ceiling grids. • Choice of one, two or three slots. Slot width is 1½-inch. • Diff has a round neck with a deep collar for easy connection to flexible duct.

• The deep backpan of the DAT was designed to ensure optimum performance without excessive noise or pressure drop.

• Core is easily removable from face of the diff.

• The DAT diff is an excellent choice for variable air volume systems. The air pattern remains tight and horizontal for effective room air distribution, even when the volume varies over a wide range. Border Type 3 (Lay-in)


B 1½" 6"

C 23¾"

Ceiling Module

Nominal Round Plaque Face Duct Size B C

1

6, 8, 10

19

2

6, 8, 10, 12

16

3

8, 10, 12, 14

13

DAT

24 x 24

Number of Slots

F146


Diffs

PERFORMANCE DATA

24X24, 1-slot

6" Round Neck

8" Round Neck

10" Round Neck

24X24, 2-slot

6" Round Neck

8" Round Neck

10" Round Neck

12" Round Neck

10" Round Neck

12" Round Neck

14" Round Neck

79 400 0.010 0.022 2-3-5 140 400 0.010 0.027 3-5-9 15 109 200 0.003 0.008 2-4-7 59 300 0.006 0.010 0-1-3 140 400 0.010 0.022 2-3-7 218 400 0.010 0.025 3-5-10 12 236 300 0.006 0.016 4-6-11 140 400 0.010 0.019 1-2-5 164 300 0.006 0.012 1-3-6 236 300 0.006 0.014 3-5-9 321 300 0.006 0.015 4-6-13 -

99 500 0.016 0.035 2-3-7 13 166 475 0.014 0.038 4-6-11 19 150 275 0.005 0.015 3-5-10 94 475 0.014 0.025 1-2-4 192 550 0.019 0.041 3-5-9 14 273 500 0.016 0.039 4-7-13 17 314 400 0.010 0.028 5-8-15 16 192 550 0.019 0.036 2-4-8 232 425 0.011 0.025 3-5-9 314 400 0.010 0.025 4-6-12 11 428 400 0.010 0.027 6-8-17 15

• Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for throw calculation data. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB.

118 138 158 177 600 700 800 900 0.022 0.031 0.040 0.051 0.051 0.069 0.090 0.114 3-4-8 3-5-9 4-5-11 4-6-12 18 22 26 29 192 218 244 270 550 625 700 775 0.019 0.024 0.031 0.037 0.051 0.066 0.083 0.102 4-7-13 5-7-14 6-8-14 6-9-15 23 26 29 32 191 232 273 313 350 425 500 575 0.008 0.011 0.016 0.021 0.024 0.036 0.049 0.065 4-6-13 5-8-14 6-9-15 7-11-16 17 22 26 30 128 163 197 231 650 825 1000 1175 0.026 0.042 0.062 0.086 0.047 0.076 0.111 0.154 2-3-6 2-4-8 3-5-9 4-6-11 12 18 23 27 244 297 349 401 700 850 1000 1150 0.031 0.045 0.062 0.082 0.066 0.097 0.135 0.178 4-6-12 5-7-14 6-8-17 6-10-18 21 26 30 34 327 382 436 491 600 700 800 900 0.022 0.031 0.040 0.051 0.056 0.077 0.100 0.127 5-8-16 6-9-18 7-10-19 8-12-20 22 26 30 33 393 471 550 628 500 600 700 800 0.016 0.022 0.031 0.040 0.044 0.064 0.087 0.113 6-9-18 8-11-20 9-13-22 10-15-23 22 27 31 34 244 297 349 401 700 850 1000 1150 0.031 0.045 0.062 0.082 0.058 0.085 0.118 0.156 3-5-10 4-6-12 5-7-14 5-8-16 16 21 25 29 300 368 436 504 550 675 800 925 0.019 0.028 0.040 0.053 0.041 0.062 0.087 0.117 4-6-12 5-7-14 6-9-17 7-10-20 15 20 25 29 393 471 550 628 500 600 700 800 0.016 0.022 0.031 0.040 0.039 0.056 0.076 0.099 5-8-15 6-9-18 7-11-22 8-12-23 17 22 26 29 535 641 748 855 500 600 700 800 0.016 0.022 0.031 0.040 0.043 0.062 0.084 0.110 7-10-21 8-13-23 10-15-25 11-17-27 21 26 30 33

197 1000 0.062 0.140 4-7-13 32 297 850 0.045 0.123 7-10-16 34 354 650 0.026 0.084 8-12-17 33 266 1350 0.114 0.203 4-6-13 31 454 1300 0.105 0.228 7-11-20 37 545 1000 0.062 0.157 9-13-21 36 707 900 0.051 0.143 11-17-24 37 454 1300 0.105 0.199 6-9-18 32 572 1050 0.069 0.151 7-11-22 32 707 900 0.051 0.125 9-14-24 32 962 900 0.051 0.139 13-19-29 36

236 1200 0.090 0.202 5-8-14 36 323 925 0.053 0.146 7-11-17 37 395 725 0.033 0.104 9-13-18 36 300 1525 0.145 0.259 5-7-14 34 506 1450 0.131 0.283 8-12-21 40 600 1100 0.075 0.189 10-14-23 38 785 1000 0.062 0.177 13-18-26 40 506 1450 0.131 0.247 7-10-20 35 640 1175 0.086 0.189 8-13-23 35 785 1000 0.062 0.154 10-15-26 35 1069 1000 0.062 0.171 14-21-30 39

276 1400 0.122 0.275 6-9-15 41 349 1000 0.062 0.170 8-12-17 39 436 800 0.040 0.127 10-14-19 38 335 1700 0.180 0.321 5-8-16 37 558 1600 0.160 0.345 9-13-22 43 654 1200 0.090 0.225 10-16-24 41 864 1100 0.075 0.214 14-19-27 43 558 1600 0.160 0.301 7-11-22 37 709 1300 0.105 0.231 9-14-24 38 864 1100 0.075 0.187 11-17-27 38 1176 1100 0.075 0.207 15-22-32 42

• Dash (-) in space indicates NC value less than 10. • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006.

F

PERFORMANCE DATA

24X24, 3-slot

8" Round Neck

Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria)


DAT - ARCHITECTURAL CEILING - LOUVERED PLAQUE

F147

Diffs



F

ARCHITECTURAL CEILING DIFFS LOUVERED PLAQUE

Louvered plaque ceiling diffs shall be the Titus Model DAT diff of the sizes and mounting types shown on the plans and outlet schedule. The DAT diff shall be of steel construction, having an 18-gauge steel plaque face and 22-gauge steel louvered blades and backpan. The diff core shall be a one-piece assembly, accessible and removable from the face of the diff. Ceiling diffs designed for a 24 x 24-inch lay-in modular ceiling shall consist of one, two or three continuous slots, 1½ inches wide, surrounding a fixed center plaque face.

Optional round damper shall be constructed of heavy gauge steel. Damper must be operable from face of the diff. The manufacturer shall provide published performance data for the square diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


Steel

DAT

Number of Slots 1 2 3 XX

Neck Size 6, 8, 10, 12, 14

SPECIFICATIONS

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness shall be HB or H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied.

Available Model: DAT

Model

F148

The diff shall have a round neck with a minimum of 1⅛-inch depth available for 6- to 14-inch nominal round duct connection.

X Module Size

Lay-In

XX x XX

Accessories EG Earthquake Tabs EQT

Border 3


X Aluminum

24 x 24

Black

XX

XX-XXX

01 84 Finish

D-100 AG-100

XXX Optional Damper Radial, Round Neck Radial, Round Neck

Diffs


LOUVERED PLAQUE, NARROW TEE - STEEL DAT-NT

Available Model: DAT-NT Products Include: • Standard Finish - #26 White. For Performance Data and Notes, please refer to page F147. • Compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems.

• The Titus DAT-NT ceiling diff satisfies architectural as well as engineering criteria. Its smooth plaque face allows the diff to harmonize with the ceiling system, without sacrificing performance.

• Choice of one, two, or three slots. Slot width is 1½inch.

• The deep backpan of the DAT-NT was designed to ensure optimum performance without excessive noise or pressure drop.

• Diff has a round neck with a deep collar for easy connection to flexible duct. • Core is easily removable from face of the diff.

• The DAT-NT diff is an excellent choice for variable air volume systems. The air pattern remains tight and horizontal for effective room air distribution, even when the volume varies over a wide range. DAT-NT



DAT-NT

F

23¾" B 1½"

6"

D 23⅜"

24 x 24

Number of Slots

Nominal Round Plaque Face Duct Size B C

1

6, 8, 10

19

2

6, 8, 10, 12

16

3

8, 10, 12, 14

13


DAT-NT

Ceiling Module

F149

Diffs



F

ARCHITECTURAL CEILING DIFFS LOUVERED PLAQUE, NARROW TEE Available Model: DAT-NT Louvered plaque ceiling diffs shall be the Titus Model DAT-NT diff of the sizes and mounting types shown on the plans and outlet schedule. The DAT-NT diff shall be of steel construction, having an 18-gauge steel plaque face and 22-gauge steel louvered blades and backpan. The diff core shall be a one-piece assembly, accessible and removable from the face of the diff. Ceiling diffs shall be compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems. The diff shall consist of one, two or three continuous slots, 1½ inches wide surrounding a fixed center plaque face.

Steel

DAT-NT

Number of Slots 1 2 3 XX

Neck Size 6, 8, 10, 12, 14

SPECIFICATIONS

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness shall be HB or H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional round damper shall be constructed of heavy gauge steel. Damper must be operable from face of the diff. The manufacturer shall provide published performance data for the square diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


Model

F150

The diff shall have a round neck with a minimum of 1⅛-inch depth available for 6- to 14-inch nominal round duct connection.

X Module Size

Aluminum Black

XX x XX

Finish 01 84 X

Accessories EG Earthquake Tabs EQT


XX-XXX

XXX Optional Damper

24 x 24

D-100 AG-100

Radial, Round Neck Radial, Round Neck

Diffs


MB-30, MBR-30

MODU-BLOC SERIES Available Models: MB-30 • Supply MBR-30 • Return Products Include: • Standard Finish - #26 White. • Titus Modu-Bloc diffs, Models MB-30 and MBR-30, are designed to be visually pleasing while providing superior performance. • Designed so that a ceiling tile (by others) can be field cut and inserted in the face of the diff. The center of Model MB-30 matches the surrounding ceiling tiles. This results in a smooth, clean appearance that blends with the ceiling.

• Fits 24 x 24-inch ceiling grid. • Discharge directions are adjustable through 180°. The Titus Modulinear pattern controller in each slot controls not only the direction of flow, but also the volume. • Choice of one, two, three or four slots. • Choice of ¾- or 1-inch slots.

• Supply diff delivers a one-, two-, three- or four-way horizontal throw or a vertical throw. With horizontal throw, the blanket of air is held tight against the ceiling even with varying volumes of air, making the MB-30 an excellent choice for VAV systems.

• Supply diff has a round neck with a deep collar for easy connection to flexible duct.

• Uniform, unbroken flow pattern guards against ceiling smudging.

• Model MBR-30 return is similar to the supply diff in appearance, but is built without the pattern controllers and backpan. Designed for plenum return, the MBR-30 has a light shield to prevent see-through and to block stray light from fixtures in the plenum.

• Discharge patterns are individually adjustable for each slot, resulting in combinations that fit the distribution requirements of the room.


MB-30, MBR-30

F

• Optional external insulation on the supply diff (Model MBI-30).

• Material is extruded aluminum face. Steel backpan or light shield, steel pattern controllers. Inlet View

MB-30

Duct (by others)

Ceiling Tile Center (by others)

Backpan of MB-30

MB-30, MBR-30

T-bar by others

T-bar by others

F151

Diffs


DIMENSIONS MODU-BLOC MB-30 DIMENSIONS 23¾" 233/16"

6¼" Inlet Diameter Nominal minus ⅛"

8¼"

Slot Width

23¾"

Slot Width

1 Slot

233/16"

1⅜"

1⅜"

3 Slots

8¼"

6¼" Slot Width ½"

Handle for removing backpan for tile installation

FIELD INSTALLATION OF CENTER TILE

F

1⅜"

1⅜"

Slot Width

2 Slots

4 Slots

CENTER CEILING TILE - CUTTING DIMENSIONS Number of Slots

Clip

Handle

Slot Width ¾-inch

1-inch

Available Inlet Sizes

1

19⅞ x 19⅞ 19⅜ x 19⅜

8”

2

16⅞ x 16⅞ 15⅞ x 15⅞

10”

3

13⅞ x 13⅞ 12⅜ x 12⅜

12”

4

10⅞ x 10⅞ 8⅞ x 8⅞

14”

DIMENSIONS

DISCHARGE PATTERNS - FIELD ADJUSTABLE

1-Way

Horizontal

F152

Dampered Horizontal

2-Way Corner

Angular Down

2-Way Opposite

Vertical

3-Way

Fully Dampered

4-Way

1-Way

Vertical & Horizontal

Diffs

DIMENSIONS

23¾" 23¼" 413/16"

413/16"

Slot Width 23¼" 23¾"

Slot Width

1 Slot

Top View

3 Slots

Upper Surface of Light Shield

413/16"

413/16" Slot Width

Slot Width 2 Slots

FIELD INSTALLATION OF CENTER TILE

4 Slots

CENTER CEILING TILE - CUTTING DIMENSIONS Number of Slots

Light Shield


MODU-BLOC MBR-30 DIMENSIONS

Slot Width ¾-inch

1-inch

1

19⅞ x 19⅞ 19⅜ x 19⅜

2

16⅞ x 16⅞ 15⅞ x 15⅞

3

13⅞ x 13⅞ 12⅜ x 12⅜

4

10⅞ x 10⅞ 8⅞ x 8⅞

F

Ceiling Tile (by others) Cut as at right Frame S Clip

Return View

Return Airflow

S Clips T-bars by others

DIMENSIONS

Light Shield of MBR-30 return

F153

Diffs


PERFORMANCE DATA

1-Slot

8" Dia.

2-Slot

8" Dia.

2-Slot

10" Dia.

3-Slot

8" Dia.

3-Slot

10" Dia.

3-Slot

12" Dia.

4-Slot

8" Dia.

4-Slot

10" Dia.

4-Slot

12" Dia.

4-Slot

14" Dia.

Neck Velocity Velocity Pressure Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw

300 0.006 105 0.047 19 4-6-12 105 0.018 2-4-9 164 0.035 16 4-7-14 105 0.011 1-2-7 164 0.018 17 3-6-12 236 0.031 23 5-8-17 105 0.009 1-2-7 164 0.014 13 2-4-11 236 0.023 20 4-8-15 321 0.037 25 7-10-21

400 0.010 140 0.084 25 5-8-16 140 0.032 14 3-6-12 218 0.063 22 6-9-18 140 0.019 15 2-4-10 218 0.032 23 5-8-16 314 0.055 29 7-11-22 140 0.016 12 1-3-9 218 0.025 20 3-7-14 314 0.040 26 7-10-20 428 0.066 31 9-14-28

500 0.016 175 0.131 30 7-10-20 175 0.049 19 5-7-15 273 0.098 27 8-11-23 175 0.030 20 3-6-12 273 0.050 28 7-10-20 393 0.086 34 9-14-28 175 0.025 17 2-5-11 273 0.038 24 5-9-18 393 0.063 31 8-13-25 535 0.104 36 12-17-35

600 0.022 209 0.188 34 8-12-24 209 0.071 23 6-9-18 327 0.141 31 9-14-28 209 0.043 24 4-7-15 327 0.071 32 8-12-23 471 0.124 38 11-17-34 209 0.036 21 3-7-14 327 0.055 28 7-11-21 471 0.091 35 10-15-31 641 0.149 40 14-21-42

700 0.031 244 0.257 37 9-14-28 244 0.097 27 7-10-21 382 0.192 34 11-16-32 244 0.058 27 6-9-17 382 0.097 35 9-14-27 550 0.169 41 13-20-39 244 0.049 24 4-8-16 382 0.075 32 8-12-25 550 0.124 38 12-18-36 748 0.203 43 16-24-49

800 0.040 279 0.335 40 11-16-32 279 0.126 29 8-12-24 436 0.250 37 12-18-37 279 0.076 30 7-10-20 436 0.127 38 10-16-31 628 0.221 44 15-22-45 279 0.064 27 6-9-18 436 0.098 35 9-14-28 628 0.161 41 14-20-41 855 0.265 46 18-28-55

PERFORMANCE DATA

F

MB-30 3/4-INCH SLOT WIDTH SUPPLY - 1-, 2-, 3-, OR 4-WAY BLOW PATTERN

F154

For Performance Notes, please refer to page F155.

900 0.051 314 0.424 43 12-18-35 314 0.160 32 9-13-26 491 0.317 40 14-21-41 314 0.096 33 7-11-22 491 0.161 40 12-18-35 707 0.279 47 17-25-51 314 0.081 29 7-10-20 491 0.125 37 11-16-32 707 0.204 43 15-23-46 962 0.335 49 21-31-61

1000 0.062 349 0.524 45 13-20-37 349 0.197 34 10-15-29 545 0.391 42 15-23-46 349 0.118 35 8-12-25 545 0.198 43 13-20-39 785 0.345 49 19-28-55 349 0.100 32 8-11-23 545 0.154 39 12-18-35 785 0.252 46 17-25-51 1069 0.414 51 23-35-65

1100 0.075 384 0.633 47 15-22-39 384 0.238 36 11-16-32 600 0.474 44 17-25-48 384 0.143 37 9-14-27 600 0.240 45 14-21-43 864 0.417 51 21-31-58 384 0.121 34 8-12-25 600 0.186 41 13-19-39 864 0.305 48 19-28-56 1176 0.501 53 25-38-68

Diffs

PERFORMANCE DATA

1-Slot

8" Dia.

2-Slot

8" Dia.

2-Slot

10" Dia.

3-Slot

8" Dia.

3-Slot

10" Dia.

3-Slot

12" Dia.

4-Slot

8" Dia.

4-Slot

10" Dia.

4-Slot

12" Dia.

4-Slot

14" Dia.

Neck Velocity Velocity Pressure Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw

300 0.006 105 0.033 15 3-5-10 105 0.014 1-3-8 164 0.026 12 3-6-12 105 0.009 1-2-7 164 0.015 14 2-4-10 236 0.024 20 4-8-15 105 0.008 1-1-5 164 0.012 1-3-10 236 0.019 17 3-7-14 321 0.030 22 5-9-19

400 0.010 140 0.058 21 5-7-14 140 0.025 2-5-10 218 0.046 19 5-8-16 140 0.017 12 1-3-9 218 0.026 20 3-7-14 314 0.043 26 7-10-20 140 0.015 1-2-8 218 0.021 17 2-6-13 314 0.033 23 5-9-18 428 0.053 28 8-12-25

500 0.016 175 0.091 26 6-9-17 175 0.039 16 3-6-13 273 0.072 23 7-10-20 175 0.026 17 2-5-11 273 0.040 25 5-9-17 393 0.067 31 8-13-25 175 0.023 14 2-4-10 273 0.033 22 4-8-16 393 0.052 28 8-11-23 535 0.083 33 10-16-31

700 0.031 244 0.178 33 8-12-24 244 0.076 23 6-9-18 382 0.142 31 9-14-28 244 0.051 24 4-8-16 382 0.079 32 8-12-24 550 0.132 38 12-18-35 244 0.045 21 3-7-14 382 0.065 29 7-11-22 550 0.102 35 11-16-32 748 0.163 41 15-22-44

800 0.040 279 0.233 36 9-14-28 279 0.100 26 7-10-21 436 0.185 33 11-16-32 279 0.066 27 5-9-18 436 0.104 35 9-14-28 628 0.172 41 13-20-40 279 0.058 24 4-8-16 436 0.085 32 8-13-25 628 0.133 38 12-18-37 855 0.212 43 17-25-50

900 0.051 314 0.295 38 10-16-31 314 0.126 28 8-12-23 491 0.235 36 12-18-36 314 0.084 30 7-10-20 491 0.131 37 10-16-31 707 0.218 44 15-23-45 314 0.074 26 5-9-18 491 0.107 34 10-14-29 707 0.168 41 14-21-41 962 0.269 46 19-28-56

1000 0.062 349 0.364 41 12-17-35 349 0.155 30 9-13-26 545 0.290 38 13-20-40 349 0.103 32 7-11-22 545 0.162 40 12-17-35 785 0.269 46 17-25-50 349 0.091 29 6-10-20 545 0.132 36 11-16-32 785 0.208 43 15-23-46 1069 0.332 48 21-31-62

1100 0.075 384 0.441 43 13-19-38 384 0.188 33 9-14-28 600 0.351 40 15-22-44 384 0.125 34 8-12-24 600 0.196 42 13-19-38 864 0.325 48 18-28-55 384 0.110 31 7-11-22 600 0.160 39 12-18-35 864 0.251 45 17-25-50 1176 0.401 50 23-34-68


F

PERFORMANCE DATA

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section Engineering Guidelines for additional information. • If the diff is mounted on an exposed duct, the throw values are 70% of those listed in the table. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section Engineering Guidelines for the catalog throw data information. • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB.

600 0.022 209 0.131 30 7-10-21 209 0.056 20 5-8-15 327 0.104 27 8-12-24 209 0.037 21 3-7-13 327 0.058 29 7-10-21 471 0.097 35 10-15-30 209 0.033 18 2-5-12 327 0.048 26 6-10-19 471 0.075 32 9-14-28 641 0.119 37 12-19-37


MB-30 1-INCH SLOT WIDTH SUPPLY - 1-, 2-, 3-, OR 4-WAY BLOW PATTERN

F155

Diffs


PERFORMANCE DATA MBR-30 RETURN WITH LIGHT SHIELD Size 1 Slot ¾" Wide Slot

2 Slot 3 Slot 4 Slot Size 1 Slot

1" Wide Slot

2 Slot 3 Slot 4 Slot

PERFORMANCE DATA

F

F156

Negative Static Pressure Airflow, cfm NC (Noise Criteria) Airflow, cfm NC (Noise Criteria) Airflow, cfm NC (Noise Criteria) Airflow, cfm NC (Noise Criteria) Negative Static Pressure Airflow, cfm NC (Noise Criteria) Airflow, cfm NC (Noise Criteria) Airflow, cfm NC (Noise Criteria) Airflow, cfm NC (Noise Criteria)

0.007 75 145 210 270 0.018 147 280 400 507 -

• Static pressures are in negative inches of water. • NC based on room absorption of 10 dB re 10-12 watts.

0.028 150 290 12 420 15 540 17 0.04 220 420 16 600 19 760 21

0.063 225 16 435 20 630 21 810 22 0.07 293 17 560 24 800 27 1013 29

0.108 300 24 580 28 840 29 1080 30 0.108 367 23 700 30 1000 33 1267 35

0.17 375 30 725 34 1050 35 1350 36 0.16 440 28 840 35 1200 38 1520 40

0.25 450 35 870 39 1260 40 1620 40 0.215 513 32 980 39 1400 42 1773 44

0.345 525 39 1015 43 1470 44 1890 45 0.28 586 36 1120 43 1600 46 2026 48

0.45 600 43 1160 47 1680 48 2160 49 0.45 733 42 1400 49 2000 52 2533 54

• Data obtained per ANSI/ASHRAE Standard 70-2006.


MODU-BLOC SERIES Available Models: MB-30 MBR-30 MBI-30

• Supply • Return • Supply • Internal Insulation • Internal Insulation

Square, architectural, faced ceiling diffs shall be Titus Model MB-30 (uninsulated) or MBI-30 (insulated) of the sizes and mounting types shown on the plans and outlet schedule. Diff shall be available in ¾- or 1-inch slot widths; one, two, three or four slots shall be available as standard. Diff shall be compatible with 24 x 24-inch modules for lay-in T-bar ceilings. Diffs must be field adjustable for vertical, one-, two-way opposite, two-way corner, three-way and four-way discharge patterns. Fixed vane diffs are not acceptable. Each supply slot of the diff shall be provided with a twoelement, aerodynamically curved, “ice-tong” shaped steel deflector capable of 180° pattern adjustment from the face of the diff and shall allow volume dampering of supply air for final balancing. All adjustments shall be accessible from the face of the diff. The diff shall have an extruded aluminum face and factory fabricated 22-gauge steel backpan. The diff shall have the capacity to insert a ceiling tile into the center of the diff to match the ceiling system. The ceiling tile will be provided by the ceiling system contractor. The backpan shall be removable and shall include side handles. Diff shall have ¼-inch thick fiberglass internal insulation (MBI30) when specified. The diff inlet shall be located on the top of the backpan and shall have a minimum of 1⅛-inch depth available for duct connection. Optional damper shall be constructed of heavy gauge steel.

The manufacturer shall provide published performance data for the architectural diff. The test data shall include static pressure drop, horizontal air throw pattern and NC. The diffs shall be tested in accordance with ANSI/ ASHRAE Standard 70-2006. Square, architectural, faced return diffs shall be Titus Model MBR-30 of the sizes and mounting types shown on the plans and outlet schedule. The face of the return diff shall match the MB-30 and MBI-30 supply diffs. Return diffs shall be available in ¾- or 1-inch slot widths; one, two, three or four slots shall be available as standard. Diff shall be compatible with 24 x 24-inch modules for lay-in T-bar ceilings. The MBR-30 shall have an extruded aluminum face and factory fabricated 22-gauge light shield. The diff shall have the capacity to insert a ceiling tile into the center of the diff to match the ceiling system. The ceiling tile will be provided by the ceiling system contractor. The light shield shall be removable.

F

The diff finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. The manufacturer shall provide published performance data for the architectural return diff. The test data shall include negative static pressure drop and NC. The diffs shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

SPECIFICATIONS

The diff finish shall be #26 white and the pattern controllers shall be black. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour

ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied.



Diffs

F157

Diffs


SUGGESTED SPECIFICATIONS Model MB-30 MBI-30 XXX-XX

SPECIFICATIONS F158

Supply, Insulated

XX

X

Inlet Size 8, 10, 12, 14 Slots

1 2 3 4

24x24

White Aluminum

3 Slots

X Slot Width

1 Slot 2 Slots

¾ 1

¾” Slot 1” Slot

4 Slots

Module Size

Plenum Return, Light Shield/Backpan

XX

X


1 2 3 4

Finish 26 01

X

Model

MBR-30

F

Module Size

Supply, Uninsulated

24x24

White Aluminum

2 Slots 3 Slots 4 Slots

X Slot Width

¾ 1

Equalizing Grid EG AG-100 Radial AG-75 Opposed Blade Earthquake Tabs EQT Accessories

Finish 26 01

X

1 Slot

XXXXX


XX LS

Light Shield (used with no inlet)

Accessories

Diffs


Available Models: MB-30-NT • Supply • ¾” or 1” Slot MBR-30-NT • Return For Performance Data and Notes, please refer to pages F154-F157. • The MB-30-NT and MBR-30-NT Modu-Bloc diffs are visually pleasing while providing superior performance.

• The MB-30-NT and MBR-30NT are designed to allow an existing ceiling tile to be field cut and inserted into the face of the diff. This results in a smooth, clean appearance that blends with the ceiling. • Pattern controllers adjust volume and discharge direction of the MB-30-NT. • Available in one, two, three, or four slots.

• Face is aluminum, backpan is steel. • Optional internal insulation.


MODU-BLOC SERIES, NARROW TEE

MB-30-NT, MBR-30-NT

MB-30-NT, MBR-30-NT

Two-Slot Unit 23¾" 233/16"

F

13/8"

Inlet Diameter Nominal minus 1/8"

6¼"

23¾" 233/16" Slot Width

1 Slot

½"

Handle for removing backpan for tile installation

Narrow Tee Detail

5

/16" 9/16"

MB-30-NT, MBR-30-NT

17/8"

F159

Diffs



F

The diff shall have an extruded aluminum face and factory fabricated 22-gauge steel backpan. The diff shall have the capacity to insert a ceiling tile into the center of the diff to match the ceiling system. The ceiling tile will be provided by the ceiling system contractor. The backpan shall be removable and shall include side handles. Diff shall have ¼-inch thick fiberglass internal insulation (MBI30) when specified.

ARCHITECTURAL CEILING DIFFS MODU-BLOC SERIES, NARROW TEE Available Models: MB-30-NT • Supply MBI-30-NT • Supply • Internal Insulation Square, architectural, faced ceiling diffs shall be Titus Model MB-30-NT (uninsulated) or MBI-30-NT (insulated) of the sizes and mounting types shown on the plans and outlet schedule. Diff shall be available in ¾or 1-inch slot widths; one, two, three, or four slots shall be available as standard. Diff shall be compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems.

The diff inlet shall be located on the top of the backpan and shall have a minimum of 1⅛-inch depth available for duct connection. Optional damper shall be constructed of heavy gauge steel. The diff finish shall be #26 white and the pattern controllers shall be black. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes.The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied.

Diffs must be field adjustable for vertical, one-way or two-way opposite, two-way corner, three-way, and four-way discharge patterns. Fixed vane diffs are not acceptable. Each supply slot of the diff shall be provided with a two-element, aerodynamically curved, “ice-tong” shaped steel deflector capable of 180° pattern adjustment from the face of the diff and shall allow volume dampering of supply air for final balancing. All adjustments shall be accessible from the face of the diff.

The manufacturer shall provide published performance data for the architectural diff. The test data shall include static pressure drop, horizontal air throw pattern, and NC. The diffs shall be tested in accordance with ANSI/ ASHRAE Standard 70-2006.

MODEL NUMBER SPECIFICATION Model MB-30-NT MBI-30-NT XXX-XX-XX

Supply, Narrow Tee, Uninsulated Supply, Narrow Tee, Insulated

XX

X

Inlet Size 8, 10, 12, 14

SPECIFICATIONS

Slots

F160

1 2 3 4

Module Size 24x24

White Aluminum

X

3 Slots 4 Slots

X Slot Width

1 Slot 2 Slots

Finish 26 01

¾ 1


XXXXX Equalizing Grid EG AG-100 Radial AG-75 Opposed Blade Earthquake Tabs EQT Accessories

Diffs


have the capacity to insert a ceiling tile into the center of the diff to match the ceiling system. The ceiling tile will be provided by the ceiling system contractor. The light shield shall be removable.

MODU-BLOC SERIES, NARROW TEE Available Models: MBR-30-NT

The diff finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied.

• Return

Square, architectural, faced return diffs shall be Titus Model MBR-30-NT of the sizes and mounting types shown on the plans and outlet schedule. The face of the return diff shall match the MB-30-NT and MBI-30-NT supply diffs. Return diffs shall be available in ¾- or 1-inch slot widths; one, two, three or four slots shall be available as standard. Diff shall be compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems.

The manufacturer shall provide published performance data for the architectural return diff. The test data shall include negative static pressure drop and NC. The diffs shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

The MBR-30-NT shall have an extruded aluminum face and factory fabricated 22-gauge light shield. The diff shall

MODEL NUMBER SPECIFICATION Model Module Size

Plenum Return, Light Shield/ Backpan, Narrow Tee

MBR-30-NT

XX


X 1 2 3 4

24x24

White Aluminum

2 Slots 3 Slots

X Slot Width

¾ 1

F

Finish 26 01

X

1 Slot




XX LS

Light Shield (used with no inlet)

Accessories

4 Slots

SPECIFICATIONS F161

Diffs

TSW SWIRL FACE - STEEL Available Model: TSW

• Steel TSW



Products Include: • Standard Finish - #26 White. • Model TSW ‘Swirl’ ceiling diff is designed to provide a tight 360B circular pattern.

• The Inlet collar is 17/8 inches deep to allow for easy duct connection.

• The TSW provides excellent performance in variable air volume systems.

• Optional Damper can be adjusted with screwdriver through center hole in diff without removing face. • The TSW is constructed of heavy gauge steel.

Border Type 3 (Lay-in)

A

F

1⅞

5

22⅞

¼ Border Type 1 (Surface Mount)

½" to ⅞" 3

1⅛"

/16"

Note: Diff will be shipped with Border 3. A TRM frame will be provided for surface mounting.

TSW

Available Sizes for Borders 1, 3 Nominal Duct Size D

Module Size

6” Dia.

8” DIa.

10” Dia.

12” Dia.

24 x 24

•

•

•

•

• Indicates available combination.

F162


Nominal Inlet

A

6”

5⅞

8”

7⅞

10”

9⅞

12”

11½

Diffs

PERFORMANCE DATA Neck Velocity Velocity Pressure Airflow, cfm Total Pressure 6" Dia. NC (Noise Criteria) Throw Airflow, cfm Total Pressure 8" Dia. NC (Noise Criteria) Throw 24 x 24 Module Airflow, cfm Total Pressure 10" Dia. NC (Noise Criteria) Throw Airflow, cfm Total Pressure 12" Dia. NC (Noise Criteria) Throw

200 0.002 34 0.004 -0-1-3 70 0.008 -1-2-3 109 0.011 -1-2-4 157 0.023 9 2-3-5

300 0.006 59 0.012 -1-2-4 105 0.017 6 1-2-4 164 0.024 10 2-3-6 239 0.053 18 3-4-8

400 500 600 700 800 900 1000 1100 1200 0.010 0.016 0.022 0.031 0.040 0.051 0.062 0.075 0.090 79 98 118 138 157 177 197 216 236 0.022 0.034 0.049 0.067 0.087 0.106 0.126 0.155 0.188 4 9 13 16 19 23 26 30 33 2-3-5 2-3-6 3-4-6 3-5-7 3-5-7 4-5-8 4-6-8 5-6-9 5-6-9 139 174 209 245 279 314 349 384 419 0.030 0.047 0.067 0.094 0.117 0.145 0.189 0.218 0.259 12 17 21 27 31 35 38 40 41 2-3-5 2-3-7 3-4-7 3-5-8 4-5-9 4-6-9 5-7-10 5-7-10 5-7-11 218 273 328 382 436 491 546 601 655 0.043 0.068 0.114 0.152 0.191 0.240 0.297 0.359 0.427 16 21 28 34 36 40 42 44 46 3-4-8 4-5-9 4-6-10 5-7-11 6-8-12 6-9-13 8-9-13 8-10-14 8-10-14 319 393 471 550 628 707 785 864 0.094 0.138 0.199 0.271 0.354 0.448 0.554 0.670 24 30 38 41 44 47 49 51 4-5-10 5-6-11 5-8-13 6-9-14 7-10-15 8-11-15 9-12-16 9-12-17

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines of this catalog for additional information. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for the catalog throw data information.

1300 0.105 256 0.219 35 5-7-9 454 0.304 43 6-8-11



TSW - SWIRL FACE

F


Diffs



F


damper. The diffs shall be shipped from the factory fully assembled and ready to install.

SWIRL FACE Available Model: TSW


Architectural swirl face ceiling diffs shall be the Titus Model TSW diff for a fixed horizontal discharge pattern. The TSW diff shall have a removable one piece stamped face of heavy gauge steel containing a circular round pattern of curved louvers. The interior of the face shall contain an inner and outer steel ring bordering the ends of the louvers. The border rings shall be securly welded to the rear of the face .

The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering, or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied.Optional round damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff.

The backpan shall be one piece stamped heavy gauge steel of the sizes and mounting types shown on the plans and outlet schedule. The diff neck shall have a 1⅛-inch depth for easy duct connection. The face of the diff shall include a center opening to allow access to an optional

The manufacturer shall provide published performance data for the swirl face diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


Surface Mount

Lay-In

Steel

TSW Neck Size

XX 6, 8, 10, 12

Border 1 3 X

White Aluminum

24x24 Module Size

Finish 26 01 XX

Opposed Blade - Rnd Neck Opposed Blade - Rnd Neck Combination Blade - Rnd Neck Butterfly Blade - Rnd Neck

SPECIFICATIONS

- Rnd

XX-XXX

Damper Radial - Rnd Neck Radial - Rnd Neck

F164

Accessories Equalizing Grid EG

AG-100 D-100 AG-75 D-75 AG-65 AG-85

XX

Diffs


SQUARE - ARCHITECTURAL PLAQUE FACE • Steel

Spectrum

Available Model: Spectrum

INTRODUCTION The Titus Spectrum diff offers a unique alternative when considering ceiling mounted air outlets for architectural building applications. The Spectrum design includes a special arcuate face with center appliqué. The appliqué is available in nine standard colors, as well as custom color matches or company logo. The versatility of these different color schemes provides the architect with a multitude of design options to compliment and enhance a building’s décor. The Spectrum also provides excellent performance by delivering a tight 4-way horizontal air discharge pattern which make is it a great choice for variable air volume applications. In additional to its architectural features, the Spectrum can also be used for retrofit applications with existing Titus perforated diffs (PCS model). The removable arcuate face can be ordered separately to retrofit existing PCS diffs in the field by removing the pattern controllers and replacing the face. • Unique architectural face design with center appliqué (nine standard colors) • Customer color matches and company logos available • Appliqué sold separately for field application & retrofit • Hinged removable faceplate is sold separately for retrofit of existing Titus perforated diffs without removal of backpan or ductwork • Excellent choice for VAV systems. The 4-way air pattern remains tight and horizontal even when the air volume varies over a wide range • 24” x 24” module size with square or round inlets • Border type 1 ships as border type 3 with separate TRM frame for easy mounting in surface mount applications • Heavy gauge steel construction

APPLIQUE INFORMATION The Spectrum applique is constructed of matte substrate material with adhesive backing. Each appliqué is individually die cut for consistency and fitted to the pre-formed square embossment in the center of the Spectrum faceplate after the diff is painted. Applique specifications include a 0.017” polycarbonate substrate with opacity film, 0.002” adhesive with peel-off backing, and total thickness of 0.019”.

COLOR OPTIONS


Spectrum

F

Titus offers nine standard appliqué colors for the Spectrum diff as well as custom colors or custom logo’s. For the custom color matching process, two color chips (2” x 2”) must be sent in to Titus. For the custom logo process, a high resolution digital image must be supplied to Titus in a 3.96” x 3.96” viewing size.

SPECTRUM F165

Diffs


DIMENSIONS

F

Round Neck

Square Neck

BORDER DETAILS Border Type 3 (Lay-In)

DIMENSIONS


F166

Frame type 1 is shipped as a frame 3 lay-in with a separate TRM frame

Round Neck

Duct Size (Inches)

A

6

5⅞

8

7⅞

10

9⅞

12

11⅞

14

13⅞

16

15⅞

Duct Size (Inches)

A

6x6

5⅞ x 5⅞

8x8

7⅞ x 7⅞

B 1

1½

Square Neck

10 x 10

9⅞ x 9⅞

12 x 12

11⅞ x 11⅞

14 x 14

13⅞ x 13⅞

B

1½

Diffs

PERFORMANCE DATA

Inlet Size 6” Dia.

8” Dia.

24” x 24” 10” Dia. Module Size 12” Dia.

14” Dia.

16” Dia.

Neck Velocity (fpm) Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw

200 0.002 39 0.004 1-1-3 70 0.007 1-1-4 109 0.008 1-2-6 157 0.014 1-2-7 214 0.019 1-2-8 279 0.025 1-2-9

300 0.006 59 0.010 1-2-3 105 0.016 1-3-7 164 0.017 2-3-8 236 0.032 2-4-10 321 0.043 2-5-12 419 0.055 2-5-13

400 0.010 78 ? 2-3-5 140 0.029 2-4-9 218 0.031 3-5-10 316 0.057 3-6-13 427 0.076 4-7-16 557 0.098 11 5-8-17

500 0.016 98 0.027 3-4-8 175 0.043 3-6-11 273 0.048 4-7-13 393 0.089 11 5-8-16 535 0.119 12 6-10-19 698 0.154 14 7-11-21

600 0.023 118 0.039 3-5-9 209 0.062 12 4-7-12 327 0.070 15 6-8-14 470 0.128 17 7-10-17 641 0.172 18 8-12-20 838 0.222 20 9-13-23

700 0.030 137 0.053 14 4-6-9 244 0.085 17 5-8-13 382 0.095 20 7-10-16 550 0.175 21 8-12-19 748 0.234 23 9-14-22 977 0.302 24 10-16-25

800 900 1000 1100 0.040 0.051 0.063 0.076 157 177 196 216 0.069 0.088 0.108 0.131 19 22 26 29 4-7-10 5-8-11 6-8-11 6-8-12 279 314 349 384 0.111 0.140 0.173 0.209 22 25 29 32 6-9-13 7-10-14 7-11-15 8-11-16 436 491 545 600 0.124 0.157 0.193 0.234 24 28 31 34 7-11-17 8-13-18 9-14-19 10-14-20 630 710 785 865 0.230 0.290 0.357 0.433 26 29 33 36 9-13-20 10-15-21 11-16-22 12-17-24 855 962 1070 1175 0.305 0.386 0.477 0.576 27 31 34 37 10-16-23 12-18-25 13-19-26 14-19-27 1117 1257 1395 1535 0.394 0.498 0.615 0.745 29 32 36 39 12-18-27 13-20-28 15-21-30 16-22-31

PERFORMANCE NOTES • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. • Throw values are in feet at terminal velocities of 150, 100 amd 50 fpm at isothermal conditions. • For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog. • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB.


SPECTRUM - ROUND INLET - ARCHITECTURAL DIFF

F

• Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts. • Dash (-) in space denotes an NC value of less than 10. • All pressures are given in inches of water. • To obtain static pressure, subtract velocity pressure from the total pressure.


Diffs


PERFORMANCE DATA SPECTRUM - SQUARE INLET - ARCHITECTURAL DIFF Inlet Size 6x6

8x8 24” x 24” Module 10 x 10 Size

12 x 12

14 x 14

PERFORMANCE DATA

F

F168

Neck Velocity (fpm) Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw

200 0.002 50 0.005 1-1-4 89 0.009 1-2-5 139 0.013 1-2-6 200 0.018 1-2-8 272 0.024 1-2-9

300 0.006 75 0.012 1-2-4 133 0.019 1-3-8 208 0.029 2-4-9 300 0.040 2-5-11 408 0.054 2-5-13

400 500 0.010 0.016 100 125 0.022 0.033 2-4-6 3-5-9 177 222 0.034 0.053 2-4-10 4-6-12 277 347 0.052 0.080 3-6-12 5-8-15 400 500 0.071 0.112 12 4-7-14 6-9-18 541 681 0.097 0.150 14 5-8-17 7-11-21

600 0.023 150 0.047 11 4-6-10 267 0.077 14 5-8-13 417 0.115 16 6-9-16 600 0.161 18 8-11-20 817 0.216 19 9-13-23

700 0.030 175 0.064 16 4-7-11 311 0.104 19 6-9-14 485 0.156 21 7-11-18 700 0.219 23 9-13-21 953 0.294 24 10-15-25

800 0.040 200 0.084 20 5-8-11 356 0.136 23 7-10-15 555 0.204 26 8-13-19 800 0.287 27 10-15-23 1090 0.385 29 12-18-26

900 0.051 225 0.106 23 6-9-12 400 0.173 26 8-11-16 625 0.258 29 9-14-20 900 0.363 31 11-17-24 1225 0.485 32 13-20-28

1000 1100 0.063 0.076 250 275 0.131 0.158 27 30 6-9-13 7-9-14 444 489 0.213 0.258 30 33 8-12-17 9-13-18 695 765 0.319 0.386 32 35 10-15-21 12-16-22 1000 1100 0.448 0.542 34 37 13-18-25 14-19-27 1360 1495 0.600 0.727 36 39 15-21-30 16-22-31

PERFORMANCE NOTES • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. • Throw values are in feet at terminal velocities of 150, 100 amd 50 fpm at isothermal conditions. • For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog. • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB.

• Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts. • Dash (-) in space denotes an NC value of less than 10. • All pressures are given in inches of water. • To obtain static pressure, subtract velocity pressure from the total pressure.

Diffs


FACE SQUARE Available Models:

Spectrum

• Steel

Architectural plaque face ceiling diff shall be the Titus model Spectrum diff for the sizes and mounting type as shown on the plans and out schedule. The Spectrum shall be constructed of a heavy gauge steel one-piece backpan with an integrally drawn inlet. Welded-in inlets and corner ts are not acceptable. Diff shall also have an arcuate (bow shaped) faceplate that is precision diestamped in one-piece. Faceplate shall be removable from room side for access to duct or damper. The faceplate shall have four arcuate openings. Each opening shall be in one of the four quadrants of diff. Each opening shall have an integral transition that is tangent to the backpan that

causes the supply airflow to exit the backpan in a single continuous flow. The appliqué shall be constructed of .017” thick polycarbonate material that includes an opacity film to prevent light transmission. Appliqué shall include a .002” thick acrylic adhesive for attachment to the faceplate. Optional round or square neck damper shall be constructed of heavy gauge steel. Damper must be operable from face of diff. Finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315 º for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. The manufacturer shall provide published performance data for the diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

MODEL NUMBER SPECIFICATION Accessories2 Model

Finish

Module Size

Spectrum XXXXXXXX Neck Size

XXXXX 6, 8, 10, 12, 14, 16, 6x6, 8x8, 10x10, 12x12, 14x14

24 x 24

X

EG Aluminum

EGL

Equalizing Grid, Long

26

White

EGS

Equalizing Grid, Short

XXXXXX

Surface Mount

1

Lay-in

3

XXX

Accessories1 Applique

Optional Damper

Border

XXX

F

Equalizing Grid, Round Neck

01

XX



Radial, Round Neck

D-100

Radial, Round Neck

AG-100

No Applique

NA

White

00

Off-White

01

D-75

Light Gray

02

Opposed Blade, Round Neck

AG-75

Medium Gray

03

Opposed Blade, Rect. Neck

AG-95

Light Beige

04

Medium Beige

05

Blue/Gray

06

Olive

07

Rust

08

Logo Match 2 color

12

Logo Match 3 color

13

Logo Match 4 color

14

Custom color match

19

SPECIFICATIONS

Opposed Blade, Round Neck

F169

Diffs

F

TDC, TDCA LOUVERED FACE, HIGH CAPACITY

• Maintains an unbroken horizontal flow pattern from maximum cfm down to minimum. Excellent performance in variable air volume systems.

Available Steel Models: TDC • with fixed discharge TDCA • with adjustable discharge Available Aluminum Models: TDC-AA • with fixed discharge TDCA-AA • with adjustable discharge Products Include: • Standard Finish - #26 White. • Titus Series TDC diffs handle an unusually large amount of air for a given pressure drop and noise level.

• In the TDCA and TDCA-AA models, movable vanes, accessible from the face, adjust the discharge pattern from horizontal to vertical. • Core is easily removable from the face of the diff.

• Extremely flexible, with cores available for one-, two-, three- or four-way horizontal flow.

• Lever operator on the optional Model AG-95 damper allows easy volume adjustment from the face of the diff.

• For a uniform face appearance on all neck sizes, specify an 18 x 18-inch dimension A size and the desired round neck size. This is available in 24 x 24-inch lay-in module size only.

• Pleasing appearance harmonizes with various architectural details especially modular ceiling systems.

BORDER TYES

TDC, TDCA


Square and Rectangular Ceiling Diffs

• Material is 22-gauge steel or aluminum with miscellaneous steel components.

Border Type 1 (Surface Mount) Square or Rectangular Neck


Ceiling Opening = A plus 3½" Duct Size A Duct Size minus ⅛"

2⅛" 13/16"

2⅛"

Ceiling Module ¼"


1½" A plus 59/16"

Border Type 1 (Surface Mount) Round Neck Ceiling Opening = A plus 3½" A Duct Size, diameter Duct Size minus ⅛"

TDC, TDCA

Ceiling Module

2⅛"

1⅜" 3⅞"


1½" ¼"

F170

A plus 59/16"


Diffs

DIMENSIONS


Border Type 5 (Dropped Face) Duct Size plus ¼"

⅜" ⅜"

Border Type 6 (Beveled Drop Face)

2⅛"

Duct Size plus 1"

7/16"

2½" Ceiling Module

⅞"

* A plus 5½"

2⅛"

* A plus 5"

Available in Steel Only Note: Std. diff is 2½” deep. Optional 4” deep diff is available.


BORDER TYES (continued)

AVAILABLE DUCT SIZES - SQUARE AND RECTANGULAR NECKS

Duct Size A

Border Types 1, 5, 6 Minimum Maximum Duct Size Duct Size A A 6x6 48 x 48

Note: Duct sizes are available in 3” increments only. Maximum duct size for border 5 is 36” x 36”.

Available Module Size

Border Types 2, 3*, 4 Max. Max. Max. Max. Min. Duct Size A Duct Size A Duct Size A Duct Size A Duct TDC TDC-AA TDCA TDCA-AA Size A (Steel) (Alum.) (Steel, Adj.) (Alum., Adj.)

12 x 12 6x6 24 x 24 6x6 48 x 24 12 x 12

9 x 9* 21 x 21* 45 x 21*

9 x 9* 21 x 21* 42 x 21*

6x6 18 x 18 18 x 18

6x6 18 x 18 18 x 18

F

* Frame 3 maximum duct size available in 4-way blow only.

AVAILABLE DUCT SIZES - ROUND NECKS

A Duct Size

Border Types 1, 5, 6 Dimension Available Round A Duct Size 6x6 6 9x9 6, 8 12 x 12 6, 8, 10, 12 15 x 15 6, 8, 10, 12, 14 18 x 18 6, 8, 10, 12, 14, 16

Note: Round duct sizes are available only in sizes shown. Border type 5 is only available in steel.

Border Types 2, 3, 4 Available Available Dimension Module Round Duct A Size Size 6x6 6 12 x 12 9x9 6, 8 6x6 6 9x9 6, 8 12 x 12 6, 8, 10, 12 24 x 24 15 x 15 6, 8, 10, 12, 14 18 x 18 6, 8, 10, 12, 14, 16

Horizontal Pattern

Vertical Pattern

DIMENSIONS

ADJUSTING HORIZONTAL-TO-VERTICAL DISCHARGE PATTERN - TDCA, TDCA-AA

F171

Diffs


DIMENSIONS OPTIONAL PATTERNS

REMOVING CENTER CORE

S1 Square

A1

B1

A2

S2 Square

B2

1 Way

2 Way

1. Remove shipping clips.

X

E2

F2

X

G2 Square Y

Y 2 Way Corner

A3

E3

X

X Y

Y

2. Push core sideways against spring.

X>2Y

XPY

A3-2

B3

X

3 Way

X

Note: Dimensions X and Y shown here are the proportions of available rectangular duct sizes. Duct sizes are available in 3-inch increments. Dimension X is always the longer dimension for each core option.

Y

Y X>Y, X<2Y

F

For A3, XPY For A3-2, X>Y, X<2Y For B3, X=2Y For E3, X>2Y

X=2Y

A4 Square

B4

X Y

3. Hold core securely and allow to drop down.

4 Way

Note: Patterns are shown in plan view (looking down into inlet).

Optional Patterns (continued)

PERFORMANCE • The table below shows the quantity and location of Model TRV vanes required per side of the diff. • Throw reduction will be shown in the isovel diagrams.

Model TRV Vanes

• Total pressure will be 1.40 times that listed in the diff performance table. • Sound level will be 4 NC higher than that listed in the diff performance table. Quantity of Model TRV Vanes Required (per Side)

Dimension X Inches

X

Model TDC Air Pattern S1

X

3

6

9

12

15

18

21

24

27

30

36

48

-

1

1½ 2½

3

4

5

5

6

7

8

11

-

2

2

3

4

4

5

7

7

8

10

14

1½

3

4

5

7

8

9

11

12

13

16

22

X L

L=(0.67)X

L

L

DIMENSIONS

L=(0.67)X L=(0.67)X

Core Style 4a 9" x 9" neck

30

X X

60

60

X X

30

200 fpm Isovel with Model TRV Vanes

X X

90

60

X

30

200 fpm Isovel without Model TRV Vanes

F172

X

60

30 Core Style G2 9" x 9" neck

X

Diffs

PERFORMANCE DATA 300 0.006 0.042 75 cfm Throw 75 38 28 19 19

8-10-14 4-6-10 4-6-9 3-5-8 3-5-8

400 0.010 0.075 100 13 cfm Throw

500 0.016 0.117 125 16 cfm Throw

600 0.022 0.169 150 23 cfm Throw

700 0.031 0.229 175 27 cfm Throw

800 0.040 0.300 200 31 cfm Throw

34 cfm

100 50 38 25 25

125 63 47 31 31

150 75 56 38 38

175 88 66 44 44

200 100 75 50 50

225 113 84 56 56

9-11-16 5-8-12 5-7-11 4-7-9 4-7-9

10-13-18 6-10-14 6-8-12 6-7-10 6-7-10

169 cfm Throw

225 15 cfm Throw

281 21 cfm Throw

cfm

169 84 63 42 42

225 113 84 56 56

281 141 105 70 70

338 169 127 84 84

11-15-21 6-9-16 8-10-14 4-7-12 4-7-12

14-17-24 8-11-18 9-11-16 7-10-14 7-10-14

16-19-27 10-14-20 10-13-18 8-11-16 8-11-16

300 cfm Throw

400 17 cfm Throw

500 23 cfm Throw

cfm

300 150 113 75 75

400 200 150 100 100

500 250 188 125 125

600 300 225 150 150

15-20-28 8-11-21 11-13-18 6-10-16 6-10-16

19-23-32 10-15-24 12-15-21 9-13-19 9-13-19

21-25-36 13-19-27 14-17-24 11-15-21 11-15-21

469 11 cfm Throw

625 19 cfm Throw

781 25 cfm Throw

cfm

469 234 176 117 117

625 313 234 156 156

781 391 293 195 195

938 469 352 234 234

19-25-35 10-14-26 13-16-23 7-12-20 7-12-20

23-29-40 13-19-30 15-19-27 11-16-23 11-16-23

26-32-45 16-24-34 17-21-30 14-18-26 14-18-26

11-14-20 8-10-15 7-9-13 7-8-11 7-8-11

338 26 Throw 17-21-30 11-16-22 11-14-20 10-12-17 10-12-17

600 28 Throw 23-28-39 15-21-30 15-18-26 13-16-23 13-16-23

938 29 Throw 29-35-49 19-26-37 19-23-33 16-20-28 16-20-28

12-15-21 9-11-16 8-10-14 7-9-12 7-9-12

394 30 cfm Throw

cfm

394 197 148 98 98

450 225 169 113 113

18-23-32 13-17-24 12-15-21 11-13-18 11-13-18

700 32 cfm Throw

cfm

700 350 263 175 175

800 400 300 200 200

25-30-43 18-23-32 16-20-28 14-17-25 14-17-25

1094 33 cfm Throw

cfm

1094 547 410 273 273

1250 625 469 313 313

31-38-53 22-28-40 20-25-35 18-22-31 18-22-31

675 12 cfm Throw

900 20 cfm Throw

1125 26 cfm Throw

1350 31 cfm Throw

1575 35 cfm Throw

cfm

675 338 253 169 169

900 450 338 225 225

1125 563 422 281 281

1350 675 506 338 338

1575 788 591 394 394

1800 900 675 450 450

23-30-42 11-17-31 16-20-28 9-15-24 9-15-24

28-34-48 15-23-36 18-23-32 13-20-28 13-20-28

31-38-54 19-29-41 21-25-36 17-22-31 17-22-31

34-42-59 23-31-44 23-28-39 20-24-34 20-24-34

37-45-64 27-34-48 24-30-42 21-26-37 21-26-37

919 13 cfm Throw

1225 21 cfm Throw

1531 27 cfm Throw

1838 32 cfm Throw

2144 36 cfm Throw

cfm

919 459 345 230 230

1225 613 459 306 306

1531 766 574 383 383

1838 919 689 459 459

2144 1072 804 536 536

2450 1225 919 613 613

27-35-49 13-20-37 19-23-32 10-17-28 10-17-28

33-40-56 18-27-42 22-26-37 16-23-32 16-23-32

36-45-63 22-33-47 24-30-42 19-26-36 19-26-36

40-49-69 27-37-52 26-32-46 23-28-40 23-28-40

43-53-75 31-40-56 29-35-49 25-30-43 25-30-43

1200 14 cfm Throw

1600 22 cfm Throw

2000 28 cfm Throw

2400 32 cfm Throw

2800 36 cfm Throw

cfm

1200 600 450 300 300

1600 800 600 400 400

2000 1000 750 500 500

2400 1200 900 600 600

2800 1400 1050 700 700

3200 1600 1200 800 800

31-39-56 15-23-42 21-26-37 12-20-32 12-20-23

37-46-64 20-30-48 25-30-43 18-26-37 18-26-37

42-51-72 25-38-54 28-34-48 22-29-41 22-29-41

46-56-79 30-42-59 30-37-52 26-32-45 26-32-45

49-60-85 35-45-64 33-40-56 28-35-49 28-35-49

1875 16 cfm Throw

2500 23 cfm Throw

3125 29 cfm Throw

3750 34 cfm Throw

4375 38 cfm Throw

cfm

1875 938 703 469 469

2500 1250 938 625 625

3125 1563 1172 781 781

3750 1875 1406 938 938

4375 2188 1641 1094 1094

5000 2500 1875 1250 1250

38-49-70 19-29-52 27-33-46 15-25-40 15-25-40

47-57-81 25-38-60 31-38-53 22-33-46 22-33-46

52-64-90 32-48-68 34-42-60 28-37-52 28-37-52

57-70-99 38-52-74 38-46-65 33-40-57 33-40-57

62-75-107 44-56-80 41-50-71 35-43-61 35-43-61

2700 17 cfm Throw

3600 24 cfm Throw

4500 30 cfm Throw

5400 35 cfm Throw

6300 39 cfm Throw

cfm

2700 1350 1013 675 675

3600 1800 1350 900 900

4500 2250 1688 1125 1125

5400 2700 2025 1350 1350

6300 3150 2363 1575 1575

7200 3600 2700 1800 1800

46-59-84 23-34-63 32-39-55 18-30-48 18-30-48

56-68-97 30-46-72 37-45-64 27-39-56 27-39-56

62-76-108 38-57-81 41-51-72 33-44-62 33-44-62

4800 19 cfm Throw

6400 26 cfm Throw

4800 2400 1800 1200 1200

6400 74-91-129 8000 83-102-144 9600 91-112-158 3200 41-61-97 4000 51-76-108 4800 61-84-118 2400 49-60-85 3000 55-68-96 3600 60-74-105 1600 36-52-74 2000 44-59-83 2400 52-64-91 1600 36-52-74 2000 44-59-83 2400 52-64-91

61-79-112 30-46-84 43-52-74 24-40-64 24-40-64

8000 32 cfm Throw

68-84-118 46-63-89 45-55-78 39-48-68 39-48-68

9600 37 cfm Throw

74-90-128 53-68-96 49-60-85 43-52-74 43-52-74

11200 41 cfm Throw

13-16-23 10-12-17 9-11-15 8-9-13 8-9-13

450 34 Throw 20-24-34 15-18-26 13-16-23 11-14-20 11-14-20

800 35 Throw 26-32-46 20-24-34 17-21-30 15-19-26 15-19-26

1250 37 Throw 33-40-57 25-30-43 22-27-38 19-23-33 19-23-33

1800 38 Throw 39-48-68 30-36-51 26-32-45 23-28-39 23-28-39

2450 39 Throw 46-56-80 35-42-60 31-37-53 27-32-46 27-32-46

3200 40 Throw 53-64-91 39-48-68 35-43-60 30-37-52 30-37-52

5000 41 Throw 66-81-114 49-60-85 44-53-76 38-46-66 38-46-66

7200 43 Throw 79-97-137 59-72-102 52-64-91 45-56-79 45-56-79

12800 45 cfm Throw

cfm 506 253 190 127 127

cfm 900 450 338 225 225

900 0.050 0.379 225 Throw 14-17-24 10-13-18 9-11-16 8-10-14 8-10-14

506 37 Throw 21-26-36 16-19-27 14-17-24 12-15-21 12-15-21

900 38 Throw 28-34-48 21-26-36 18-23-32 16-20-28 16-20-28

1406 40 cfm Throw 1406 703 527 352 352

35-43-60 26-32-45 23-28-40 20-25-35 20-25-35

2025 41 cfm Throw 2025 1013 759 506 506

42-51-73 31-38-54 28-34-48 24-30-42 24-30-42

2756 42 cfm Throw 2756 1378 1034 689 689

49-60-85 37-45-63 32-40-56 28-34-49 28-34-49

3600 43 cfm Throw 3600 1800 1350 900 900

56-68-97 42-51-72 37-45-64 32-39-56 32-39-56

5625 45 cfm Throw 5625 2813 2109 1406 1406

70-86-121 52-64-91 46-57-80 40-49-70 40-49-70

8100 46 cfm Throw 8100 4050 3038 2025 2025

84-103-145 63-77-109 55-68-96 48-59-83 48-59-83

14400 48 cfm Throw

11200 99-121-171 12800 105-129-182 14400 112-137-193 5600 71-90-128 6400 79-97-137 7200 84-102-145 4200 65-80-113 4800 70-85-121 5400 74-91-128 2800 57-69-98 3200 61-74-105 3600 64-79-111 2800 57-69-98 3200 61-74-105 3600 64-79-111


F

PERFORMANCE DATA

Return Factors -SP = 1.1 TP NC + 1 S1 6 x S2&G2 6 A3 0.25 ft2 A4 Return Factors -SP = 1.1 TP NC + 1 S1 9 x S2&G2 9 A3 0.56 ft2 A4 Return Factors -SP = 1.1 TP NC + 1 S1 12 x S2&G2 12 A3 1.00 2 ft A4 Return Factors -SP = 1.1 TP NC + 1 S1 15 x S2&G2 15 A3 1.56 ft2 A4 Return Factors -SP = 1.1 TP NC + 1 S1 18 x S2&G2 18 A3 2.25 ft2 A4 Return Factors -SP = 1.1 TP NC + 1 S1 21 x S2&G2 21 A3 3.06 ft2 A4 Return Factors -SP = 1.1 TP NC + 1 S1 24 x S2&G2 24 A3 4.00 ft2 A4 Return Factors -SP = 1.1 TP NC + 1 S1 30 x S2&G2 30 A3 6.25 2 ft A4 Return Factors -SP = 1.1 TP NC + 1 S1 36 x S2&G2 36 A3 9.00 ft2 A4 Return Factors -SP = 1.1 TP NC + 1 S1 48 x S2&G2 48 A3 16.00 2 ft A4

Neck Vel. Vel. Pressure Total Pressure Total cfm NC Side X X&Y X Y X&Y Total cfm NC Side X X&Y X Y X&Y Total cfm NC Side X X&Y X Y X&Y Total cfm NC Side X X&Y X Y X&Y Total cfm NC Side X X&Y X Y X&Y Total cfm NC Side X X&Y X Y X&Y Total cfm NC Side X X&Y X Y X&Y Total cfm NC Side X X&Y X Y X&Y Total cfm NC Side X X&Y X Y X&Y Total cfm NC Side X X&Y X Y X&Y


TDC - SQUARE NECK - LOUVERED FACE - SUPPLY - HORIZONTAL BLOW PATTERN

F173

Diffs


PERFORMANCE DATA

PERFORMANCE DATA

F

F174

TDC - RECTANGULAR NECK - LOUVERED FACE - SUPPLY - HORIZONTAL BLOW PATTERN

Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 6 x A3 9 0.38 A3-2 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 6 x A3 12 0.50 B3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 6 x A3 15 0.63 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 6 x A3 18 0.75 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 6 x A3 21 0.88 E3 ft2 B4

Neck Vel. Vel. Pressure Total Pressure Total cfm NC Side X X&Y X Y X Y X Y X Y Total cfm NC Side X X&Y X Y X Y X Y X Y Total cfm NC Side X X&Y X Y X Y X Y X Y Total cfm NC Side X X&Y X Y X Y X Y X Y Total cfm NC Side X X&Y X Y X Y X Y X Y

300 0.006 0.042 113 cfm Throw 113 11-13-18 56 6-9-15 75 7-10-14 38 4-7-12 47 6-10-14 19 4-7-11 42 6-9-15 35 4-7-12 38 6-10-14 19 4-7-11 150 cfm Throw 150 12-15-21 75 7-10-17 113 8-12-16 38 5-8-14 66 7-11-16 19 5-8-12 75 10-13-19 38 5-8-14 56 7-11-16 19 5-8-12 188 cfm Throw 188 14-17-24 94 7-11-19 150 9-13-18 38 6-9-15 84 8-12-18 19 6-8-14 113 12-15-21 38 6-9-15 75 8-12-18 19 6-8-14 225 cfm Throw 225 15-18-26 113 8-12-21 188 10-14-20 38 6-9-17 103 9-14-19 19 6-9-15 150 13-16-23 38 6-9-17 94 9-14-19 19 6-9-15 263 cfm Throw 263 16-20-28 131 9-13-23 225 11-15-22 38 7-10-18 122 10-15-21 19 7-10-16 188 14-18-25 38 7-10-18 113 10-15-21 19 7-10-16

400 0.010 0.075 150 14 cfm Throw 150 12-15-21 75 8-12-17 100 9-12-16 50 6-9-14 63 9-11-16 25 6-9-12 56 8-12-17 47 6-9-14 50 9-11-16 25 6-9-12 200 15 cfm Throw 200 14-17-24 100 9-13-20 150 11-13-19 50 7-10-16 88 10-13-18 25 7-10-14 100 12-15-22 50 7-10-16 75 10-13-18 25 7-10-14 250 16 cfm Throw 250 16-19-27 125 10-15-22 200 12-15-21 50 8-11-18 113 11-14-20 25 8-11-16 150 14-17-24 50 8-11-18 100 11-14-20 25 8-11-16 300 16 cfm Throw 300 17-21-30 150 11-16-25 250 13-16-23 50 8-13-19 138 12-16-22 25 8-12-17 200 15-19-27 50 8-13-19 125 12-16-22 25 8-12-17 350 17 cfm Throw 350 19-23-32 175 12-18-27 300 14-18-25 50 9-14-21 163 13-17-24 25 9-13-19 250 17-20-29 50 9-14-21 150 13-17-24 25 9-13-19







Diffs

PERFORMANCE DATA

Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 6 x A3 24 1.00 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 6 x A3 30 1.25 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 9 x A3 12 0.75 A3-2 ft2 B4

Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 9 x A3 18 1.13 B3 ft2 B4

300 0.006 0.042 300 cfm Throw 300 17-21-30 150 9-14-25 263 12-16-23 38 7-11-19 141 11-16-22 19 7-11-17 225 15-19-27 38 7-11-19 131 11-16-22 19 7-11-17 375 cfm Throw 375 19-24-33 188 11-16-27 338 13-18-26 38 8-12-21 178 12-18-25 19 8-12-19 300 17-21-30 38 8-12-21 169 12-18-25 19 8-12-19 225 cfm Throw 225 15-18-26 113 8-12-21 141 10-14-20 84 6-9-17 91 9-14-19 42 6-9-15 75 9-13-21 75 6-9-17 70 9-14-19 42 6-9-15 281 cfm Throw 281 17-20-29 141 9-14-24 197 12-16-23 84 7-11-19 120 10-15-21 42 7-10-17 117 10-15-24 82 7-11-19 98 10-15-21 42 7-10-17 338 cfm Throw 338 18-22-32 169 10-15-26 253 13-17-25 84 8-12-20 148 11-17-23 42 8-11-18 169 14-20-28 84 8-12-20 127 11-17-23 42 8-11-18

400 0.010 0.075 400 17 cfm Throw 400 20-24-34 200 13-19-28 350 15-19-27 50 10-15-22 188 14-18-26 25 10-14-20 300 18-22-31 50 10-15-22 175 14-18-26 25 10-14-20 500 18 cfm Throw 500 22-27-38 250 14-21-32 450 17-21-30 50 11-16-25 238 16-20-29 25 11-16-22 400 20-24-34 50 11-16-25 225 16-20-29 25 11-16-22 300 16 cfm Throw 300 17-21-30 150 45977 188 13-16-23 113 8-13-19 122 12-16-22 56 8-12-17 100 12-17-24 100 8-13-19 94 12-16-22 56 8-12-17 375 17 cfm Throw 375 19-24-33 188 46739 263 15-18-26 113 9-14-21 159 14-18-25 56 9-14-19 156 13-19-27 109 9-14-21 131 14-18-25 56 9-14-19 450 18 cfm Throw 450 21-26-36 225 13-20-30 338 16-20-28 113 10-15-23 197 15-19-27 56 10-15-21 225 19-23-32 113 10-15-23 169 15-19-27 56 10-15-21



700 800 900 0.031 0.040 0.050 0.229 0.300 0.379 700 800 900 32 35 38 cfm Throw cfm Throw cfm Throw 700 26-32-45 800 28-34-49 900 30-36-52 350 22-27-37 400 23-28-40 450 25-30-43 613 21-25-36 700 22-27-38 788 23-28-40 88 17-21-29 100 18-22-31 113 19-23-33 328 20-24-34 375 21-26-36 422 22-27-38 44 15-19-26 50 16-20-28 56 17-21-30 525 23-29-41 600 25-31-43 675 27-33-46 88 17-21-29 100 18-22-31 113 19-23-33 306 20-24-34 350 21-26-36 394 22-27-38 44 15-19-26 50 16-20-28 56 17-21-30 875 1000 1125 33 36 39 cfm Throw cfm Throw cfm Throw 875 29-36-51 1000 31-38-54 1125 33-41-58 438 24-30-42 500 26-32-45 563 27-34-48 788 23-28-40 900 25-30-42 1013 26-32-45 88 19-23-33 100 20-25-35 113 21-26-37 416 22-27-38 475 23-29-40 534 25-30-43 44 17-21-29 50 18-22-31 56 19-24-33 700 26-32-45 800 28-34-49 900 30-36-51 88 19-23-33 100 20-25-35 113 21-26-37 394 22-27-38 450 23-29-40 506 25-30-43 44 17-21-29 50 18-22-31 56 19-24-33 525 600 675 31 34 38 cfm Throw cfm Throw cfm Throw 525 23-28-39 600 24-30-42 675 26-32-45 263 19-23-32 300 20-25-35 338 21-26-37 328 18-22-31 375 19-23-33 422 20-25-35 197 15-18-25 225 16-19-27 253 17-20-29 213 17-21-29 244 18-22-31 274 19-23-33 98 13-16-23 113 14-17-24 127 15-18-26 175 19-23-32 200 20-24-34 225 21-26-37 175 15-18-25 200 16-19-27 225 17-20-29 164 17-21-29 188 18-22-31 211 19-23-33 98 13-16-23 113 14-17-24 127 15-18-26 656 750 844 32 35 38 cfm Throw cfm Throw cfm Throw 656 25-31-44 750 27-33-47 844 29-35-50 328 21-26-36 375 22-27-39 422 24-29-41 459 20-24-34 525 21-26-37 591 23-28-39 197 16-20-28 225 18-21-30 253 19-23-32 279 19-23-33 319 20-25-35 359 21-26-37 98 15-18-25 113 16-19-27 127 17-20-29 273 21-25-36 313 22-27-38 352 24-29-41 191 16-20-28 219 18-21-30 246 19-23-32 230 19-23-33 263 20-25-35 295 21-26-37 98 15-18-25 113 16-19-27 127 17-20-29 788 900 1013 32 36 39 cfm Throw cfm Throw cfm Throw 788 28-34-48 900 30-36-52 1013 32-39-55 394 23-28-40 450 25-30-43 506 26-32-45 591 22-27-38 675 23-28-40 759 25-30-43 197 18-22-31 225 19-23-33 253 20-25-35 345 21-25-36 394 22-27-38 443 23-29-41 98 16-20-28 113 17-21-30 127 18-22-32 394 25-30-43 450 26-32-46 506 28-34-48 197 18-22-31 225 19-23-33 253 20-25-35 295 21-25-36 338 22-27-38 380 23-29-41 98 16-20-28 113 17-21-30 127 18-22-32


F

PERFORMANCE DATA

Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 9 x A3 15 0.94 A3-2 ft2 B4




F175

Diffs


PERFORMANCE DATA

PERFORMANCE DATA

F

F176


Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 9 x A3 21 1.31 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 9 x A3 24 1.50 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 9 x A3 30 1.88 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 9 x A3 36 2.25 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 12 x A3 15 1.25 A3-2 ft2 B4


300 0.006 0.042 394 11 cfm Throw 394 20-24-34 197 11-16-28 309 14-19-27 84 8-12-22 176 12-18-25 42 8-12-20 225 17-22-30 84 8-12-22 155 12-18-25 42 8-12-20 450 11 cfm Throw 450 21-26-36 225 12-17-30 366 15-20-28 84 9-13-23 204 13-19-27 42 9-13-21 281 19-23-33 84 9-13-23 183 13-19-27 42 9-13-21 563 12 cfm Throw 563 24-29-41 281 13-19-34 478 16-23-32 84 10-15-26 260 14-21-30 42 10-15-24 394 21-26-36 84 10-15-26 239 14-21-30 42 10-15-24 675 12 cfm Throw 675 26-32-45 338 14-21-37 591 18-25-35 84 11-16-29 316 16-23-33 42 11-16-26 506 23-28-40 84 11-16-29 295 16-23-33 42 11-16-26 375 cfm Throw 375 19-24-33 188 46707 225 13-18-26 150 8-12-21 150 12-18-25 75 8-12-19 117 11-17-27 129 8-12-21 113 12-18-25 75 8-12-19

400 500 600 700 800 0.010 0.016 0.022 0.031 0.040 0.075 0.117 0.169 0.229 0.300 525 656 788 919 1050 18 24 29 33 36 cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw 525 23-28-39 656 25-31-44 788 28-34-48 919 30-37-52 1050 32-39-56 263 14-22-32 328 18-26-36 394 22-28-40 459 25-30-43 525 27-32-46 413 18-22-31 516 20-24-34 619 22-27-38 722 23-29-41 825 25-31-43 113 11-17-25 141 14-20-28 169 17-22-31 197 19-24-34 225 21-25-36 234 16-21-29 293 19-23-33 352 21-25-36 410 22-27-39 469 24-29-41 56 11-16-23 70 14-18-25 84 16-20-28 98 17-21-30 113 19-23-32 300 20-25-35 375 23-28-39 450 25-30-43 525 27-33-47 600 29-35-50 113 11-17-25 141 14-20-28 169 17-22-31 197 19-24-34 225 21-25-36 206 16-21-29 258 19-23-33 309 21-25-36 361 22-27-39 413 24-29-41 56 11-16-23 70 14-18-25 84 16-20-28 98 17-21-30 113 19-23-32 600 750 900 1050 1200 19 24 29 33 37 cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw 600 24-30-42 750 27-33-47 900 30-36-52 1050 32-39-56 1200 34-42-60 300 15-23-35 375 19-27-39 450 23-30-43 525 27-32-46 600 28-35-49 488 19-23-33 609 21-26-37 731 23-28-40 853 25-31-43 975 27-33-46 113 12-18-27 141 15-21-30 169 18-23-33 197 21-25-36 225 22-27-38 272 17-22-31 340 20-25-35 408 22-27-38 476 24-29-41 544 26-31-44 56 12-17-24 70 15-19-27 84 17-21-30 98 19-23-32 113 20-24-34 375 22-27-38 469 24-30-42 563 27-33-46 656 29-35-50 750 31-38-53 113 12-18-27 141 15-21-30 169 18-23-33 197 21-25-36 225 22-27-38 244 17-22-31 305 20-25-35 366 22-27-38 427 24-29-41 488 26-31-44 56 12-17-24 70 15-19-27 84 17-21-30 98 19-23-32 113 20-24-34 750 938 1125 1313 1500 19 25 30 34 37 cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw 750 27-33-47 938 30-37-53 1125 33-41-58 1313 36-44-62 1500 38-47-67 375 17-26-39 469 21-31-43 563 26-34-48 656 30-36-51 750 32-39-55 638 21-26-37 797 24-29-41 956 26-32-45 1116 28-34-49 1275 30-37-52 113 13-20-30 141 17-24-34 169 20-26-37 197 23-28-40 225 25-30-43 347 19-25-35 434 23-28-39 520 25-30-43 607 27-33-46 694 29-35-50 56 13-19-27 70 16-21-30 84 19-24-33 98 21-25-36 113 22-27-38 525 24-30-42 656 27-33-47 788 30-36-51 919 32-39-56 1050 34-42-59 113 13-20-30 141 17-24-34 169 20-26-37 197 23-28-40 225 25-30-43 319 19-25-35 398 23-28-39 478 25-30-43 558 27-33-46 638 29-35-50 56 13-19-27 70 16-21-30 84 19-24-33 98 21-25-36 113 22-27-38 900 1125 1350 1575 1800 20 26 31 35 38 cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw 900 30-36-52 1125 33-41-58 1350 36-45-63 1575 39-48-68 1800 42-52-73 450 19-28-43 563 24-34-48 675 28-37-52 788 32-40-56 900 35-43-60 788 23-28-40 984 26-32-45 1181 28-35-49 1378 31-38-53 1575 33-40-57 113 15-22-33 141 18-26-37 169 22-29-41 197 25-31-44 225 27-33-47 422 21-27-38 527 25-30-43 633 27-33-47 738 29-36-51 844 31-38-54 56 14-21-30 70 18-24-33 84 21-26-36 98 23-28-39 113 24-30-42 675 27-33-46 844 30-36-51 1013 33-40-56 1181 35-43-61 1350 38-46-65 113 15-22-33 141 18-26-37 169 22-29-41 197 25-31-44 225 27-33-47 394 21-27-38 492 25-30-43 591 27-33-47 689 29-36-51 788 31-38-54 56 14-21-30 70 18-24-33 84 21-26-36 98 23-28-39 113 24-30-42 500 625 750 875 1000 18 24 29 33 36 cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw 500 22-27-38 625 25-30-43 750 27-33-47 875 29-36-51 1000 31-38-54 250 14-21-32 313 18-25-35 375 21-27-39 438 24-30-42 500 26-32-45 300 17-21-30 375 19-24-34 450 21-26-37 525 23-28-40 600 25-30-42 200 11-16-25 250 14-20-28 300 16-21-30 350 19-23-33 400 20-25-35 200 16-20-29 250 18-23-32 300 20-25-35 350 22-27-38 400 23-29-40 100 11-16-22 125 13-18-25 150 16-19-27 175 17-21-29 200 18-22-31 156 15-22-31 195 19-25-35 234 22-27-38 273 24-29-42 313 26-31-44 172 11-16-25 215 14-20-28 258 16-21-30 301 19-23-33 344 20-25-35 150 16-20-29 188 18-23-32 225 20-25-35 263 22-27-38 300 23-29-40 100 11-16-22 125 13-18-25 150 16-19-27 175 17-21-29 200 18-22-31



Diffs

PERFORMANCE DATA

Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 12 x A3 18 1.50 A3-2 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 12 x A3 21 1.75 A3-2 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 12 x A3 24 2.00 B3 ft2 B4

Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 12 x A3 36 3.00 E3 ft2 B4

300 400 500 600 700 800 900 0.006 0.010 0.016 0.022 0.031 0.040 0.050 0.042 0.075 0.117 0.169 0.229 0.300 0.379 450 600 750 900 1050 1200 1350 11 19 24 29 33 37 40 cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw 450 21-26-36 600 24-30-42 750 27-33-47 900 30-36-52 1050 32-39-56 1200 34-42-60 1350 36-45-63 225 12-17-30 300 15-23-35 375 19-27-39 450 23-30-43 525 27-32-46 600 28-35-49 675 30-37-52 300 15-20-28 400 19-23-33 500 21-26-37 600 23-28-40 700 25-31-43 800 27-33-46 900 28-35-49 150 9-13-23 200 12-18-27 250 15-21-30 300 18-23-33 350 21-25-36 400 22-27-38 450 23-29-41 188 13-19-27 250 17-22-31 313 20-25-35 375 22-27-38 438 24-29-41 500 26-31-44 563 27-33-47 75 9-13-21 100 12-17-24 125 15-19-27 150 17-21-30 175 19-23-32 200 20-24-34 225 21-26-36 169 12-19-30 225 17-24-34 281 21-27-38 338 24-30-42 394 26-32-46 450 28-34-49 506 30-37-52 141 9-13-23 188 12-18-27 234 15-21-30 281 18-23-33 328 21-25-36 375 22-27-38 422 23-29-41 150 13-19-27 200 17-22-31 250 20-25-35 300 22-27-38 350 24-29-41 400 26-31-44 450 27-33-47 75 9-13-21 100 12-17-24 125 15-19-27 150 17-21-30 175 19-23-32 200 20-24-34 225 21-26-36 525 700 875 1050 1225 1400 1575 12 19 25 30 34 37 40 cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw 525 23-28-39 700 26-32-45 875 29-36-51 1050 32-39-56 1225 35-43-60 1400 37-45-64 1575 39-48-68 263 12-19-32 350 17-25-37 438 21-30-42 525 25-32-46 613 29-35-50 700 31-37-53 788 32-40-56 375 16-22-31 500 21-25-36 625 23-28-40 750 25-31-43 875 27-33-47 1000 29-36-50 1125 31-38-53 150 10-14-25 200 13-19-29 250 16-23-33 300 19-25-36 350 22-27-39 400 24-29-41 450 25-31-44 225 14-21-29 300 19-24-34 375 22-27-38 450 24-29-41 525 26-32-45 600 28-34-48 675 29-36-51 75 9-14-23 100 13-19-26 125 16-21-29 150 19-23-32 175 20-25-35 200 21-26-37 225 23-28-39 230 13-20-32 306 18-26-37 383 22-29-42 459 26-32-46 536 28-35-49 613 30-37-53 689 32-39-56 148 10-14-25 197 13-19-29 246 16-23-33 295 19-25-36 345 22-27-39 394 24-29-41 443 25-31-44 188 14-21-29 250 19-24-34 313 22-27-38 375 24-29-41 438 26-32-45 500 28-34-48 563 29-36-51 75 9-14-23 100 13-19-26 125 16-21-29 150 19-23-32 175 20-25-35 200 21-26-37 225 23-28-39 600 800 1000 1200 1400 1600 1800 12 20 25 30 34 38 41 cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw 600 24-30-42 800 28-34-49 1000 31-38-54 1200 34-42-60 1400 37-45-64 1600 40-49-69 1800 42-52-73 300 13-20-35 400 18-27-40 500 22-32-45 600 27-35-49 700 31-37-53 800 33-40-57 900 35-43-60 450 17-23-33 600 22-27-38 750 25-30-42 900 27-33-46 1050 29-36-50 1200 31-38-54 1350 33-40-57 150 10-15-27 200 14-21-31 250 17-25-35 300 21-27-38 350 24-29-41 400 26-31-44 450 27-33-47 263 15-22-31 350 20-26-36 438 23-29-40 525 26-31-44 613 28-34-48 700 30-36-51 788 31-38-54 75 10-15-24 100 14-20-28 125 17-22-31 150 20-24-34 175 21-26-37 200 23-28-40 225 24-30-42 300 19-26-37 400 25-30-43 500 28-34-48 600 30-37-53 700 33-40-57 800 35-43-61 900 37-46-65 150 10-15-27 200 14-21-31 250 17-25-35 300 21-27-38 350 24-29-41 400 26-31-44 450 27-33-47 225 15-22-31 300 20-26-36 375 23-29-40 450 26-31-44 525 28-34-48 600 30-36-51 675 31-38-54 75 10-15-24 100 14-20-28 125 17-22-31 150 20-24-34 175 21-26-37 200 23-28-40 225 24-30-42 750 1000 1250 1500 1750 2000 2250 13 20 26 31 35 38 41 cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw 750 27-33-47 1000 31-38-54 1250 35-43-61 1500 38-47-67 1750 42-51-72 2000 44-54-77 2250 47-58-82 375 15-22-39 500 20-30-45 625 25-35-50 750 30-39-55 875 34-42-59 1000 37-45-63 1125 39-48-67 600 19-26-37 800 25-30-42 1000 27-34-47 1200 30-37-52 1400 32-40-56 1600 35-42-60 1800 37-45-64 150 11-17-30 200 15-23-35 250 19-28-39 300 23-30-43 350 27-33-46 400 29-35-50 450 30-37-53 338 17-25-35 450 22-29-40 563 26-32-45 675 29-35-50 788 31-38-53 900 33-40-57 1013 35-43-61 75 11-17-27 100 15-22-31 125 19-25-35 150 22-27-38 175 24-29-41 200 26-31-44 225 27-33-47 450 24-30-42 600 28-34-49 750 31-38-54 900 34-42-59 1050 37-45-64 1200 40-49-69 1350 42-51-73 150 11-17-30 200 15-23-35 250 19-28-39 300 23-30-43 350 27-33-46 400 29-35-50 450 30-37-53 300 17-25-35 400 22-29-40 500 26-32-45 600 29-35-50 700 31-38-53 800 33-40-57 900 35-43-61 75 11-17-27 100 15-22-31 125 19-25-35 150 22-27-38 175 24-29-41 200 26-31-44 225 27-33-47 900 1200 1500 1800 2100 2400 2700 13 21 27 31 36 39 42 cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw cfm Throw 900 30-36-52 1200 34-42-60 1500 38-47-67 1800 42-52-73 2100 45-56-79 2400 49-60-84 2700 52-63-89 450 16-24-43 600 22-33-49 750 27-39-55 900 33-43-60 1050 37-46-65 1200 40-49-69 1350 43-52-74 750 21-28-40 1000 27-33-46 1250 30-37-52 1500 33-40-57 1750 36-43-62 2000 38-46-66 2250 40-49-70 150 13-19-33 200 17-25-38 250 21-30-43 300 25-33-47 350 29-36-51 400 31-38-54 450 33-41-58 413 18-27-38 550 24-31-44 688 29-35-50 825 31-38-54 963 34-41-59 1100 36-44-63 1238 38-47-66 75 12-19-30 100 17-24-34 125 21-27-38 150 24-30-42 175 26-32-45 200 28-34-49 225 30-36-52 600 26-33-46 800 31-38-53 1000 34-42-59 1200 38-46-65 1400 41-50-70 1600 43-53-75 1800 46-56-80 150 13-19-33 200 17-25-38 250 21-30-43 300 25-33-47 350 29-36-51 400 31-38-54 450 33-41-58 375 18-27-38 500 24-31-44 625 29-35-50 750 31-38-54 875 34-41-59 1000 36-44-63 1125 38-47-66 75 12-19-30 100 17-24-34 125 21-27-38 150 24-30-42 175 26-32-45 200 28-34-49 225 30-36-52


F

PERFORMANCE DATA

Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 12 x A3 30 2.50 E3 ft2 B4




F177

Diffs


PERFORMANCE DATA

PERFORMANCE DATA

F

F178


Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 12 x A3 48 4.00 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 15 x A3 18 1.88 A3-2 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 15 x A3 21 2.19 A3-2 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 15 x A3 24 2.50 A3-2 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 15 x A3 30 3.13 B3 ft2 B4










Diffs

PERFORMANCE DATA

Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 15 x A3 36 3.75 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 15 x A3 48 5.00 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 18 x A3 21 2.63 A3-2 ft2 B4










F

PERFORMANCE DATA





F179

Diffs


PERFORMANCE DATA

PERFORMANCE DATA

F

F180


Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 18 x A3 36 4.50 B3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 18 x A3 48 6.00 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 21 x A3 24 3.50 A3-2 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 21 x A3 30 4.38 A3-2 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 21 x A3 36 5.25 A3-2 ft2 B4










Diffs

PERFORMANCE DATA

Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 21 x A3 48 7.00 E3 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 24 x A3 30 5.00 A3-2 ft2 B4 Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 24 x A3 36 6.00 A3-2 ft2 B4










F

PERFORMANCE DATA

Return Factors -SP = 1.1 TP NC + 1 A1&B1 A2&B2 E2&F2 24 x A3 48 8.00 B3 ft2 B4




F181

Diffs


PERFORMANCE DATA Neck Vel. Vel. Pres. Total Pres. Return Factors Total cfm -SP = 1.1 TP NC NC + 1 Side A1&B1 X A2&B2 X&Y E2&F2 X Y 30 x A3 X Y 48 10.00 A3-2 X Y ft2 B4 X Y Return Factors Total cfm -SP = 1.1 TP NC NC + 1 Side A1&B1 X A2&B2 X&Y E2&F2 X Y 36 x A3 X Y 48 12.00 A3-2 X Y ft2 B4 X Y

300 0.006 0.042 3000 17 cfm Throw 3000 54-67-94 1500 30-45-78 2063 38-52-74 938 23-34-61 1266 33-50-70 469 23-34-54 1200 32-48-77 900 23-34-61 1031 33-50-70 469 23-34-54 3600 18 cfm Throw 3600 60-73-103 1800 33-49-85 2250 42-57-81 1350 25-38-66 1463 37-54-77 675 25-37-59 1200 35-53-84 1200 25-38-66 1125 37-54-77 675 25-37-59




cfm 7000 3500 4813 2188 2953 1094 2800 2100 2406 1094 cfm 8400 4200 5250 3150 3413 1575 2800 2800 2625 1575

700 0.031 0.229 7000 39 Throw 83-102-144 68-84-119 65-79-112 53-66-93 62-76-107 48-59-83 68-83-118 53-66-93 62-76-107 48-59-83 8400 40 Throw 91-111-158 75-92-130 71-87-123 59-72-101 68-83-117 52-64-91 74-91-129 59-72-101 68-83-117 52-64-91

PERFORMANCE DATA

F


F182


cfm 8000 4000 5500 2500 3375 1250 3200 2400 2750 1250 cfm 9600 4800 6000 3600 3900 1800 3200 3200 3000 1800

800 0.040 0.300 8000 43 Throw 89-109-154 73-90-127 69-85-120 57-70-99 66-81-114 51-63-89 73-89-126 57-70-99 66-81-114 51-63-89 9600 44 Throw 97-119-168 80-98-139 76-93-131 63-77-108 72-89-125 56-69-97 80-97-138 63-77-108 72-89-125 56-69-97


Diffs

PERFORMANCE DATA Return Factors -SP = 1.1 TP NC + 1 S1 6 x S2&G2 6 A3 6" Round A4 Return Factors -SP = 1.1 TP NC + 1 S1 9 x S2&G2 9 A3 6" Round A4 Return Factors -SP = 1.1 TP NC + 1 S1 9 x S2&G2 9 A3 8" Round A4 Return Factors -SP = 1.1 TP NC + 1 S1 12 x S2&G2 12 A3 8" Round A4 Return Factors -SP = 1.1 TP NC + 1 S1 12 x S2&G2 12 A3 10" Round A4 Return Factors -SP = 1.1 TP NC + 1

S1 15 x S2&G2 15 A3 12" Round A4 Return Factors -SP = 1.1 TP NC + 1 15 x 15 14" Round

S1 S2&G2 A3 A4

78 0.058 10 cfm Throw 75 5-7-15 38 3-5-10 29 3-4-8 20 2-4-7 20 2-4-7 98 0.041 10 cfm Throw 98 6-9-18 49 4-6-13 37 3-5-9 25 3-5-8 25 3-5-8 139 0.046 10 cfm Throw 139 7-10-21 70 4-7-14 52 4-6-11 35 3-5-9 35 3-5-9 174 0.041 11 cfm Throw 174 8-13-24 87 5-8-17 66 5-7-12 44 4-7-11 44 4-7-11 218 0.041 10 cfm Throw 218 8-13-24 109 5-8-17 82 5-7-12 55 4-7-11 55 4-7-11 235 0.033 5 cfm Throw 235 7-11-23 118 5-7-15 89 4-6-13 59 4-6-12 59 4-6-12 314 0.038 10 cfm Throw 314 10-15-31 157 7-10-21 119 6-9-16 79 5-8-14 79 5-8-14 320 0.029 cfm Throw 320 9-13-27 160 6-9-18 121 5-8-16 80 4-7-14 80 4-7-14

98 0.092 16 cfm Throw 98 6-9-18 50 4-6-13 37 3-5-9 25 3-5-8 25 3-5-8 117 0.058 14 cfm Throw 117 7-11-20 59 5-7-14 44 4-6-10 29 4-6-9 29 4-6-9 174 0.072 16 cfm Throw 174 8-13-24 87 5-8-17 66 5-7-12 44 4-7-11 44 4-7-11 209 0.059 16 cfm Throw 209 10-15-27 105 7-10-19 79 6-9-13 52 5-8-12 52 5-8-12 272 0.064 16 cfm Throw 272 11-16-31 136 7-11-22 103 6-9-13 68 5-8-12 68 5-8-12 314 0.059 13 cfm Throw 314 10-15-31 157 7-10-21 119 6-10-20 79 5-8-12 79 5-8-12 392 0.059 17 cfm Throw 392 13-19-37 196 8-13-26 148 7-11-18 98 7-10-16 98 7-10-16 427 0.051 14 cfm Throw 427 12-18-37 214 8-12-24 161 7-10-19 107 6-9-17 107 6-9-17





176 0.296 31 cfm Throw 176 45978 88 7-11-18 66 6-8-12 44 6-7-12 44 6-7-12 215 0.196 30 cfm Throw 215 20-24-34 108 9-14-20 81 7-9-13 54 7-8-12 54 7-8-12 314 0.235 32 cfm Throw 314 15-23-33 157 10-15-24 119 9-11-16 79 8-10-14 79 8-10-14 383 0.197 31 cfm Throw 383 19-26-37 192 12-19-26 145 10-12-18 96 9-11-16 96 9-11-16 490 0.206 31 cfm Throw 490 19-29-41 245 13-19-30 185 11-14-20 123 10-13-18 123 10-13-18 628 0.235 32 cfm Throw 628 21-31-47 314 13-19-30 237 11-14-20 157 11-14-21 157 11-14-21 706 0.190 32 cfm Throw 706 23-35-50 353 15-23-36 267 13-17-24 177 12-15-22 177 12-15-22 855 0.205 33 cfm Throw 855 24-37-55 428 16-24-40 323 14-19-27 214 13-17-24 214 13-17-24


F

PERFORMANCE DATA

S1 12 x S2&G2 12 A3 12" Round A4 Return Factors -SP = 1.1 TP NC + 1

Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y


TDC - ROUND NECK LOUVERED FACE - SUPPLY - HORIZONTAL BLOW PATTERN

F183

Diffs


PERFORMANCE DATA

F

TDC - ROUND NECK LOUVERED FACE - SUPPLY - HORIZONTAL BLOW PATTERN Return Factors -SP = 1.1 TP NC + 1 S1 18 x S2&G2 18 A3 6" Round A4 Return Factors -SP = 1.1 TP NC + 1 S1 18 x S2&G2 18 A3 8" Round A4 Return Factors -SP = 1.1 TP NC + 1 S1 18 x S2&G2 18 A3 10" Round A4 Return Factors -SP = 1.1 TP NC + 1 S1 18 x S2&G2 18 A3 12" Round A4 Return Factors -SP = 1.1 TP NC + 1

PERFORMANCE DATA

S1 18 x S2&G2 18 A3 14" Round A4 Return Factors -SP = 1.1 TP NC + 1

F184

18 x 18 16" Round

S1 S2&G2 A3 A4

Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y

98 0.041 cfm Throw 98 6-9-18 49 4-6-13 37 3-5-9 25 3-5-8 25 3-5-8 174 0.041 11 cfm Throw 174 8-13-24 87 5-8-17 66 5-7-12 44 4-7-11 44 4-7-11 218 0.041 10 cfm Throw 218 8-13-24 109 5-8-17 82 5-7-12 55 4-7-11 55 4-7-11 314 0.038 10 cfm Throw 314 10-15-31 157 7-10-21 119 6-9-16 79 5-8-14 79 5-8-14 427 0.036 12 cfm Throw 427 12-18-27 214 8-12-24 161 7-10-19 107 6-9-17 107 6-9-17 418 0.020 – cfm Throw 418 10-15-31 209 7-10-21 158 6-10-20 105 5-8-17 105 5-8-17

117 0.058 14 cfm Throw 117 7-11-20 59 5-7-14 44 4-6-10 29 4-6-9 29 4-6-9 209 0.059 16 cfm Throw 209 10-15-27 105 7-10-19 79 6-9-13 52 5-8-12 52 5-8-12 272 0.064 16 cfm Throw 272 11-16-31 136 7-11-22 103 6-9-13 68 5-8-12 68 5-8-12 392 0.059 17 cfm Throw 392 13-19-37 196 8-13-26 148 7-11-18 98 7-10-16 98 7-10-16 534 0.056 17 cfm Throw 534 15-23-43 267 10-15-31 202 8-13-21 134 8-12-19 134 8-12-19 558 0.036 12 cfm Throw 558 14-21-42 279 9-14-28 211 8-12-22 140 7-11-19 140 7-11-19



176 215 254 0.131 0.196 0.273 25 30 34 cfm Throw cfm Throw cfm Throw 176 11-17-25 215 20-24-34 254 17-21-30 88 7-11-18 108 9-14-20 127 11-15-21 66 6-8-12 81 7-9-13 95 8-10-14 44 6-7-11 54 7-8-12 64 7-9-13 44 6-7-11 54 7-8-12 64 7-9-13 314 383 453 0.132 0.197 0.275 27 32 36 cfm Throw cfm Throw cfm Throw 314 15-23-33 383 19-26-37 453 22-28-40 157 10-15-24 192 12-19-26 227 15-20-29 119 9-11-16 145 10-12-18 171 11-14-19 79 8-10-14 96 9-11-16 113 10-12-18 79 8-10-14 96 9-11-16 113 10-12-18 436 490 599 0.163 0.206 0.308 28 31 36 cfm Throw cfm Throw cfm Throw 436 17-26-39 490 19-29-41 599 24-32-46 218 11-17-28 245 13-19-30 300 16-23-33 165 10-13-29 185 11-14-20 226 13-16-22 109 9-12-17 123 10-13-18 150 11-14-20 109 9-12-17 123 10-13-18 150 11-14-20 623 706 863 0.150 0.190 0.284 29 32 37 cfm Throw cfm Throw cfm Throw 623 21-31-47 706 23-35-50 863 29-39-55 312 14-21-34 353 15-23-36 432 19-28-40 235 12-16-23 267 13-17-24 326 15-19-27 156 11-14-21 177 12-15-22 216 14-17-24 156 11-14-21 177 12-15-22 216 14-17-24 855 962 1175 0.142 0.180 0.269 30 33 38 cfm Throw cfm Throw cfm Throw 855 27-37-55 962 27-41-58 1175 33-45-64 428 16-24-40 481 18-27-42 588 22-33-47 323 14-19-27 363 16-20-29 444 18-22-32 214 13-17-24 241 14-18-26 294 16-20-29 214 13-17-24 241 14-18-26 294 16-20-29 977 1116 1256 0.109 0.142 0.180 29 34 38 cfm Throw cfm Throw cfm Throw 977 24-37-59 1116 28-42-63 1256 31-47-67 489 16-24-42 558 18-28-45 628 21-31-48 369 14-20-29 421 16-22-31 474 18-23-33 244 13-18-26 279 15-19-28 314 17-21-29 244 13-18-26 279 15-19-28 314 17-21-29


Diffs

PERFORMANCE DATA Available Models: TDC, TDC-AA, TDCA, TDCA-AA, TDV, TDV-AA • All pressures are in inches of water. TP is total pressure, 9” x 9” Model TDC • 4-Way Diff - SP is negative static 240 cfm Total pressure for return units. 20°F Cooling Differential • Throw values are given for terminal velocities of 150, 100, and 50 fpm. For an explanation of catalog throw 6" 3" data, see the section, Engineering 12" Guidelines for catalog throw data. • NC values are based on a room absorption of 10 dB, re 10-12 watts, with one diff operating. • If the diff is used as a return inlet, the following corrections apply: • Negative static pressure: Multiply the factor at the upper left corner of the performance table by the total pressure listed in the table. • Sound: Add the NC correction at the upper left corner of the performance table to the NC value listed in the table. • Return Performance Example: 6 x 6 Model TDC handling: 150 cfm of return air –SP = 1.1(-TP). Return negative SP = 1.1 x (0.169) = - 0.1859 inches wg. Return NC = NC Table + 1. Return NC = 23 + 1 = 24.

MODEL TDCA PERFORMANCE • For Model TDCA diffs (adjustable pattern controllers) apply the corrections from the table at the right to the TDC data for square neck, 4-way core styles, as follows:

• TP = Listed value x correction • NC = Listed value + correction • Throw = Listed value x correction

Apply the throw factor to the 50 fpm terminal velocity throw only.

30" 16° 30°

200 fpm Isovel

30"

RECOMMENDED MAXIMUM AIRFLOW Ceiling Height, ft.

8

9

10

12

Airflow, cfm, per Side

200

350

550

900

15

20

1500 4000

F

Note: Although this data is based on a 20°F temperature differential during cooling, it also applies to any differential between 15°F and 25°F.

CORRECTIONS FOR MODEL TDCA (ADJUSTABLE PATTERN CONTROLLERS) Nominal Neck Size

NC (add)

Total Pressure (Multiply)

Vertical Throw (Multiply) Cooling 20 F

Heating, ∆T

H

V

H

V

6x6

3

7

1.3

1.6

1.3

0 F 1.1

20 F 0.8

9x9

3

7

1.5

2.3

1.4

1.2

0.72

12 x 12

3

7

1.5

2.3

1.5

1.25

0.65

15 x 15

3

7

1.5

2.3

1.55

1.27

0.62

18 x 18

3

7

1.5

2.3

1.6

1.3

0.59

21 x 21

3

7

1.5

2.3

1.65

1.35

0.57

24 x 24

3

7

1.5

2.3

1.1

1.1

0.55

Note: TDC and TDV Performance Data were obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. • Vertical adjustments are most effective with the above sizes, using an A4 pattern. • Vertical throw will not work with round inlets.

PERFORMANCE DATA

• These products have been tested per ANSI/ASHRAE 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines for additional information. • Data in the tables apply when the diff is mounted nearly flush with the ceiling for maximum ceiling effect. When no ceiling effect is present, the horizontal throw will be about 25% less than shown in the tables. The mounting distance below the ceiling will also affect the downward projection angle as indicated in the diagram at upper right.

Ceiling


PERFORMANCE NOTES

F185

Diffs



F

SQUARE AND RECTANGULAR CEILING DIFFS

to provide full vertical projection as well as horizontal projection (see page G153 for recommended sizes). The inner core assembly must be removable in the field without tools for easy installation, cleaning or damper adjustment.

LOUVERED FACE, HIGH CAPACITY SQUARE, RECTANGULAR, OR ROUND NECK Available Steel Models: TDC • Fixed Discharge TDCA • Adjustable Discharge Available Aluminum Models: TDC-AA • Fixed Discharge TDCA-AA • Adjustable Discharge Ceiling diffs shall be Titus Models TDC (steel) or TDC-AA (aluminum with miscellaneous steel components) for fixed, horizontal discharge pattern and TDCA (steel) or TDCAAA (aluminum with miscellaneous steel components) for adjustable discharge pattern. These diffs shall consist of an outer frame assembly of the sizes and mounting types shown on the plans and outlet schedule. A square or rectangular inlet shall be an integral part of the frame assembly and a transition piece shall be available to facilitate attachment of round duct. An inner core assembly consisting of fixed deflection louvers shall be available in one-, two-, three- or four-way horizontal discharge patterns. Models TDCA and TDCA-AA shall include adjustable vanes

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering, or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional damper shall be constructed of heavy gauge steel (aluminum also available). Damper must be operable from the face of the diff by removing the spring loaded inner core assembly. Optional Throw Reducing Vanes (TRV) must be available to deflect a horizontal discharge airstream from each side of the TDC diff into diverging airstreams. The manufacturer shall provide published performance data for the diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

MODEL NUMBER SPECIFICATION Model TDC TDCA

Sq. or Rect. Neck

Height White

Sq. or Rect. Neck, Adjustable Pattern

XXXX

X

Width

Aluminum

X

SPECIFICATIONS

Finish 26 01

X

1 5 Beveled 6 Border

XX

XX

1 2 2-Way, Corner 2C 3-Way 3 4-Way 4 Blow Pattern

Surface Mount

Dropped

F186

Optional Damper AG-95 Opposed Blade AG-35-B Opposed Blade - Short AG-65-S Opposed Blade - Long AG-65-L Opposed Blade

1-Way

2-Way, Opposite

EGL EGS Throw Reducing Vanes TRV Earthquake Tabs EQT Accessories Equalizing Grid - Long

Equalizing Grid - Short

Blow Pattern 1 2-Way, Opposite 2 2-Way, Corner 2C 3-Way 3 4-Way 4 1-Way

Model TDC TDCA

Sq. or Rect. Neck

Height

Sq. or Rect. Neck, Adjustable Pattern

XXXX Width

X

X

Border Snap-In 2 Lay-In 3 Spline 4 XX x XX 12 x 12 24 x 24 48 x 24 Module Size

X

XX White

Aluminum

26 01 Finish

XXX

XX-XX-X

Accessories EGL Equalizing Grid - Short EGS Throw Reducing Vanes TRV Earthquake Tabs EQT Equalizing Grid - Long

XX

XX-XX-X

AG-95 AG-35-B Opposed Blade - Short AG-65-S Opposed Blade - Long AG-65-L Optional Damper Opposed Blade Opposed Blade

XXX

Diffs


Model TDC TDCA

Rnd. Neck Rnd. Neck, Adjustable Pattern

XXXX

XX

Backpan Size 6x6 9x9 12 x 12 15 x 15 18 x 18 XX x XX

Module Size (inches)

Backpan Size “A” (inches) 6x6 9x9

12 x 12

24 x 24

Model TDC TDCA

XX White

Aluminum

26 01 Finish

Round Inlet Size (inches)

Accessories EG Throw Reducing Vanes TRV Earthquake Tabs EQT Equalizing Grid

XX

XX-XXX

D-100 AG-100 Opposed Blade D-75 Opposed Blade AG-75 Combination AG-65 Butterfly AG-85 Optional Damper (note) Radial Radial

XXX

6 6, 8

6x6

6

9x9

6, 8

12 x 12

6, 8, 10, 12

15 x 15

6, 8, 10, 12, 14

18 x 18

6, 8, 10, 12, 14, 16

Rnd. Neck, Adjustable Pattern

XX

XX White

Aluminum


6x6

6

9x9

6, 8


Border 2 Snap-In 3 Lay-In 4 Spline X

Inlet Size 6, 8, 10, 12, 14, 16 Backpan Size “A” (inches)

X

12 x 12 24 x 24 Module Size

Rnd. Neck

XXXX

Border 2 Lay-In 3 Spline 4

Snap-In

XX x XX

Inlet Size 6, 8, 10, 12, 14, 16



Model Number Specification (continued)

6, 8, 10, 12

15 x 15 18 x 18

6, 8, 10, 12, 14 6, 8, 10, 12, 14, 16

XX

XX-XXX

Accessories Equalizing Grid EG TRV Throw Reducing Vanes EQT Earthquake Tabs XXX



SPECIFICATIONS

12 x 12

26 01 Finish

Blow Pattern 1-Way 1 2-Way, Opposite 2 2-Way, Corner 2C 3-Way 3 4-Way 4

F

F187

Diffs



F

Model Number Specification (continued) Model TDC-AA TDCA-AA

X

X

Width Module Size (inches) 12 x 12

6x6

24 x 24

18 x 18

48 x 24

18 x 18

TDCA-AA

White Aluminum

26 01 Finish

White Aluminum

X

1 6 Border

Surface Mount Beveled

Rnd. Neck, Aluminum Rnd. Neck, Adjustable Pattern, Aluminum

XXXX

XX

Border Type Surface Mount

White

Round Inlet Size (inches) 6

9x9

6, 8

AG-95 AG-35-B Opposed Blade, Alum. AG-95-AA Opposed Blade, Alum. AG-35-B-AA Opposed Blade - Short AG-65-L Opposed Blade - Long AG-65-S Optional Damper Opposed Blade

3-Way 4-Way

XX

XX-XX-X-XX

AG-95 AG-35-B Opposed Blade, Alum. AG-95-AA Opposed Blade, Alum. AG-35-B-AA Opposed Blade - Short AG-65-L Opposed Blade - Long AG-65-S Optional Damper Opposed Blade Opposed Blade

12 x 12

6, 8, 10, 12

15 x 15 18 x 18

6, 8, 10, 12, 14 6, 8, 10, 12, 14, 16

26 01 Finish

Equalizing Grid - Short Throw Reducing Vanes

XX

XXX

Opposed Blade

2-Way, Corner

Blow Pattern 1 2-Way, Opposite 2 2-Way, Corner 2C 3-Way 3 4-Way 4 XX

Aluminum

6x6

XX-XX-X-XX

Blow Pattern 1 2 2C 3 4 XX

Earthquake Tabs

XX-XX-X-XX



XXX



1-Way

1


X

Finish 26 01

Accessories EGL Equalizing Grid - Short EGS Throw Reducing Vanes TRV Earthquake Tabs EQT Equalizing Grid - Long

XX

2-Way, Opposite

Height

X

Model TDC-AA

SPECIFICATIONS

XX

1-Way

Sq. or Rect. Neck, Adjustable Pattern, Aluminum

Width

F188

X

Sq. or Rect. Neck, Aluminum

XXXX

TDCA-AA

XX x XX 12 x 12 24 x 24 48 x 24 Module Size

Backpan Size “A” (inches)

Model TDC-AA

Border Snap-In 2 Lay-In 3 Spline 4

Height

Sq. or Rect. Neck, Adjustable Pattern, Aluminum

XXXX


Sq. or Rect. Neck, Aluminum

Accessories EGS TRV EQT XX

Diffs


Model TDC-AA TDCA-AA

XXXX

Rnd. Neck, Aluminum Rnd. Neck, Adjustable Pattern, Aluminum

XX

Module Size 12 x 12 24 x 24

White Aluminum

XX x XX

Inlet Size 6, 8, 10, 12, 14, 16

3 Lay-In

Border Type

Round



Inlet Size (inches)

12 x 12

6x6 9x9

6 6, 8

24 x 24

6x6

6

9x9

6, 8

12 x 12

6, 8, 10, 12

15 x 15

6, 8, 10, 12, 14

18 x 18

6, 8, 10, 12, 14, 16

Optional Damper (note) Radial D-100 Radial AG-100 Opposed Blade D-75 Opposed Blade AG-75 Combination AG-65 Butterfly AG-85

Finish 26 01 XX

XX


XX-XX-X-XX

1-Way


2-Way, Opposite

Throw Reducing Vanes Earthquake Tabs


XX EGS TRV EQT Accessories



F

SPECIFICATIONS F189

Diffs

F

TDC-NT, TDC-AA-NT TDC-NT, TDC-AA-NT


Square and Rectangular Ceiling Diffs (continued)

LOUVERED FACE, NARROW TEE Available Models: TDC-NT TDC-AA-NT


• The TDC-NT is an extremely flexible, high capacity ceiling diff that can meet a wide range of applications. It is an excellent choice for variable volume applications because it maintains a horizontal air pattern from maximum to minimum cfm.

• Available in sizes from 6 x 6 inches up to 18 x 18 inches, in 3-inch increments. • Material is heavy gauge steel.

• Choose from one-, two-, three- or four-way cores.

Border Type NT Square Neck

Duct Size A Duct Size minus ⅛" 2⅛"

⅜"

1½" 23⅜"

TDC-NT, TDC-AA-NT

24"

F190

Diffs


without tools for easy installation, cleaning or damper adjustment.

LOUVERED FACE, NARROW TEE


Available Models: TDC-NT TDC-AA-NT

• Steel • Fixed Discharge • Aluminum • Fixed Discharge

Ceiling diffs shall be Titus model TDC-NT (steel) or TDCAA-NT (aluminum) for a fixed, horizontal discharge pattern. Diff shall be compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems. These diffs shall consist of an outer frame assembly of the sizes and mounting types shown on the plans and outlet schedule. A square or rectangular inlet shall be an integral part of the frame assembly and a transition piece shall be available to facilitate attachment of round duct. An inner core assembly consisting of fixed deflection louvers shall be available in one-, two-, three- or four-way horizontal discharge patterns. The inner core assembly must be removable in the field

Optional damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the diff by removing the spring loaded inner core assembly. Optional Throw Reducing Vanes (TRV) must be available to deflect a horizontal discharge airstream from each side of the TDC diff into diverging airstreams. The manufacturer shall provide published performance data for the diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


F

Optional Damper AG-95 Opposed Blade AG-35-B Opposed Blade - Short AG-65-S Opposed Blade - Long AG-65-L Opposed Blade

Height

Model

Finish 26 01

White Aluminum

Square Neck

TDC-NT TDC-AA-NT

X

X

24 x 24

Width

Module Size

Backpan Size 6x6 9x9 12 x 12 15 x 15 18 x 18

Model Round Neck

XX

Inlet Size


24 x 24

XX x XX

6, 8, 10, 12, 14, 16



6x6

6

9x9

6, 8

12 x 12

6, 8, 10, 12

15 x 15

6, 8, 10, 12, 14

18 x 18

6, 8, 10, 12, 14, 16

XX

XX-XX-X

1 2 2-Way, Corner 2C 3-Way 3 4-Way 4 Blow Pattern 1-Way

2-Way, Opposite

Aluminum

Finish 26 01

XXX



Optional Damper (note) Radial D-100 Radial AG-100 Opposed Blade D-75 Opposed Blade AG-75 Combination AG-65 Butterfly AG-85

24 x 24

XX

XX

Module Size

2-Way, Opposite


XX-XXX

XXX

EG TRV Earthquake Tabs EQT Accessories Equalizing Grid

Throw Reducing Vanes


SPECIFICATIONS

TDC-NT TDC-AA-NT

X

White



F191

Diffs

F

TDV, TDV-AA LOUVERED FACE, INDUCTION VANES

• The Titus TDV and TDV-AA have louvered faces with integrated induction vanes for exceptional air mixing. • Slot operator on the optional Model AG-95 damper allows easy volume adjustment. (Rectangular necks only).

Available Steel Model: TDV Available Aluminum Model: TDV-AA Products Include: • Standard Finish - #26 White. • Titus Model TDV and TDV-AA are high capacity ceiling diffs. These diffs maintain an unbroken horizontal flow pattern from maximum cfm down to minimum, it is an excellent choice for variable air volume application.

• Core is easily removable from the face of the diff.

TDV, TDV-AA



• For a uniform face appearance on all neck sizes, specify an 18 x 18-inch dimension A size and the desired round neck size. This is available in 24 x 24-inch lay-in module size only.

• Model TDV is extremely flexible, with cores available for one-, two-, three- or four-way horizontal flow. • Material heavy gauge steel or aluminum.

BORDER TYPES Border Type 2 (Snap-In) 2⅛"

Border Type 1 (Surface Mount) Square or Rectangular Neck

Ceiling Opening = A plus 3½"

13/16"

Duct Size A Duct Size minus ⅛"

Ceiling Module

2⅛"


¼"

Ceiling Module

TDV, TDV-AA

2⅛"

A plus 59/16"

Border Type 1 (Surface Mount) Round Neck Ceiling Opening = A plus 3½" A Duct Size, diameter


Duct Size minus ⅛" 1⅜"


3⅞"

⅜" ⅜"

F192

1½"

2⅛"

¼"

1½"

A plus 59/16"

Ceiling Module


Diffs

DIMENSIONS S1 Square

A1

B1

A2

S2 Square

B2

1 Way

Duct Size plus ¼" 2 Way

X

E2

G2 Square Y

Y

2½"

7/16"

X

F2

2 Way Corner

A3

E3

X

* A plus 5½"

X Y

Y

Note: Standard diff is 2½ inches deep. Optional 4-inch deep diff is available.

X>2Y

XPY

A3-2

B3

X

3 Way

X Y

Y

Border Type 6 (Bevel Drop Face)

X>Y, X<2Y

Duct Size plus 1"

For A3, XPY For A3-2, X>Y, X<2Y For B3, X=2Y For E3, X>2Y

X=2Y

A4 Square

X

B4

Note: Dimensions X and Y shown here are the proportions of available rectangular duct sizes. Duct sizes are available in 3-inch increments. Dimension X is always the longer dimension for each core option.


Border Type 5 (Dropped Face)

Y 4 Way

⅞"

2⅛"

Note: Patterns are shown in plan view (looking down into inlet).

* A plus 5"

F

AVAILABLE DUCT SIZES - SQUARE AND RECTANGULAR NECKS

Duct Size A

Border Types 1, 5, 6 Minimum Maximum Duct Size Duct Size A A 6x6

48 x 48 (note 2)

Border Types 2, 3, 4 Available Minimum Maximum Module Duct Size A Duct Size A Size 12 x 12 24 x 24

6x6 6x6

48 x 24

12 x 12

6x6 18 x 18 42 x 18 (note 3)

Note 1: Duct sizes are available in 3” increments only. Note 2: Maximum duct size for border 5 is 36” x 36”. Maximum duct size for TDVAA is 36” x 36”. Note 3: Maximum duct size for TDV-AA is 36” x 18”.


A Duct Size

Border Types 1, 5, 6 Dimension Available Round A Duct Size 6x6 6 9x9 6, 8 12 x 12 6, 8, 10, 12 15 x 15 6, 8, 10, 12, 14 18 x 18 6, 8, 10, 12, 14, 16

Available Module Size 12 x 12

24 x 24





DIMENSIONS

Note: Round duct sizes are available only in sizes shown.

Border Types 2, 3, 4 Available Dimension Round Duct A Size 6x6 6 6x6 6 9x9 6, 8 12 x 12 6, 8, 10, 12 15 x 15 6, 8, 10, 12, 14 18 x 18 6, 8, 10, 12, 14, 16

F193

Diffs


PERFORMANCE DATA

F

TDV - SQUARE NECK - LOUVERED FACE, INDUCTION VANES - HORIZONTAL DISCHARGE PATTERN

6"X6"

9"x9"

12"x12"

15"x15"

PERFORMANCE DATA

18"x18"

F194

Neck Velocity Velocity Pressure Total Pressure Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft.

300 0.006 0.042 75 11 8-10-14 4-6-10 19 3-5-8 28 4-6-9 3-5-8 169 14 11-15-21 6-9-16 42 4-7-12 63 8-10-14 4-7-12 300 16 15-20-28 10-14-26 75 6-10-16 113 11-13-18 6-10-16 469 17 19-25-35 11-17-31 117 7-12-20 176 13-16-23 7-12-20 675 18 23-30-42 11-17-31 169 9-15-24 253 16-20-28 9-15-24

• All pressures are in inches of water. • Throw velocities given are for isothermal terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB.

400 0.010 0.075 100 19 9-11-16 5-8-12 25 4-7-9 38 5-7-11 4-7-9 225 21 14-17-24 8-11-18 56 7-10-14 84 9-11-16 7-10-14 400 23 19-23-32 13-19-30 100 9-13-19 150 12-15-21 9-13-19 625 25 23-29-40 15-23-36 156 11-16-23 234 15-19-27 11-16-23 900 26 28-34-48 15-23-36 225 13-20-28 338 18-23-32 13-20-28

500 0.016 0.117 125 25 10-13-18 6-10-14 31 6-7-10 47 6-8-12 6-7-10 281 27 16-19-27 10-14-20 70 8-11-16 105 10-13-18 8-11-16 500 29 21-25-36 16-24-34 125 11-15-21 188 14-17-24 11-15-21 781 31 26-32-45 19-29-41 195 14-18-26 293 17-21-30 14-18-26 1125 32 31-38-54 19-29-41 281 17-22-31 422 21-25-36 17-22-31

600 0.022 0.169 150 29 11-14-20 8-10-15 38 7-8-11 56 7-9-13 7-8-11 338 32 17-21-30 11-16-22 84 10-12-17 127 11-14-20 10-12-17 600 34 23-28-39 19-26-37 150 13-16-23 225 15-18-26 13-16-23 938 35 29-35-49 23-31-44 234 16-20-28 352 19-23-33 16-20-28 1350 37 34-42-59 23-31-44 338 20-24-34 506 23-28-39 20-24-34

700 0.031 0.229 175 33 12-15-21 9-11-16 44 7-9-12 66 8-10-14 7-9-12 394 36 18-23-32 13-17-24 98 11-13-18 148 12-15-21 11-13-18 700 38 25-30-43 22-28-40 175 14-17-25 263 16-20-28 14-17-25 1094 39 31-38-53 27-34-48 273 18-22-31 410 20-25-35 18-22-31 1575 41 37-45-64 27-34-48 394 21-26-37 591 24-30-42 21-26-37

800 0.040 0.300 200 37 13-16-23 10-12-17 50 8-9-13 75 9-11-15 8-9-13 450 40 20-24-34 15-18-26 113 11-14-20 169 13-16-23 11-14-20 800 41 26-32-46 25-30-43 200 15-19-26 300 17-21-30 15-19-26 1250 43 33-40-57 30-36-51 313 19-23-33 469 22-27-38 19-23-33 1800 44 39-48-68 30-36-51 450 23-28-39 675 26-32-45 23-28-39

900 0.051 0.379 225 40 14-17-24 10-13-18 56 8-10-14 84 9-11-16 8-10-14 506 43 21-26-36 16-19-27 127 12-15-21 190 14-17-24 12-15-21 900 44 28-34-48 26-32-45 225 16-20-28 338 18-23-32 16-20-28 1406 46 35-43-60 31-38-54 352 20-25-35 527 23-28-40 20-25-35 2025 47 42-51-73 31-38-54 506 24-30-42 759 28-34-48 24-30-42

• Dash (-) in space denotes an NC value less than 10. • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. • Throw values given are for isothermal conditions.


Diffs

PERFORMANCE DATA

21"x21"

24"x24"

30"x30"

36"x36"

48"x48"

300 0.006 0.042 919 19 27-35-49 13-20-37 230 10-17-28 345 19-23-32 13-20-37 1200 20 31-39-56 15-23-42 300 12-20-32 450 21-26-37 15-23-42 1875 22 38-49-70 19-29-52 469 15-25-40 703 27-33-46 19-29-52 2700 23 46-59-84 23-34-63 675 18-30-48 1013 32-39-55 23-34-63 4800 25 61-79-112 30-46-84 1200 24-40-64 1800 43-52-74 30-46-84

400 0.010 0.075 1225 27 33-40-56 18-27-42 306 16-23-32 459 22-26-37 18-27-42 1600 28 37-46-64 20-30-48 400 18-26-37 600 25-30-43 20-30-48 2500 29 47-57-81 25-38-60 625 22-33-46 938 31-38-53 25-38-60 3600 30 56-68-97 30-46-72 900 27-39-56 1350 37-45-64 30-46-72 6400 32 74-91-129 41-61-97 1600 36-52-74 2400 49-60-85 41-61-97


500 600 700 800 900 0.016 0.022 0.031 0.040 0.051 0.117 0.169 0.229 0.300 0.379 1531 1838 2144 2450 2756 33 38 42 45 48 36-45-63 40-49-69 43-53-75 46-56-80 49-60-85 22-33-47 27-37-52 31-40-56 35-42-60 37-45-63 383 459 536 613 689 19-26-36 23-28-40 25-30-43 27-32-46 28-34-49 574 689 804 919 1034 24-30-42 26-32-46 29-35-49 31-37-53 32-40-56 22-33-47 27-37-52 31-40-56 35-42-60 37-45-63 2000 2400 2800 3200 3600 34 38 42 46 49 42-51-72 46-56-79 49-60-85 53-64-91 56-68-97 25-38-54 30-42-59 35-45-64 39-48-68 42-51-72 500 600 700 800 900 22-29-41 26-32-45 28-35-49 30-37-52 32-39-56 750 900 1050 1200 1350 28-34-48 30-37-52 33-40-56 35-43-60 37-45-64 25-38-54 30-42-59 35-45-64 39-48-68 42-51-72 3125 3750 4375 5000 5625 35 40 44 47 51 52-64-90 57-70-99 62-75-107 66-81-114 70-86-121 32-48-68 38-52-74 44-56-80 49-60-85 52-64-91 781 938 1094 1250 1406 28-37-52 33-40-57 35-43-61 38-46-66 40-49-70 1172 1406 1641 1875 2109 34-42-60 38-46-65 41-50-71 44-53-76 46-57-80 32-48-68 38-52-74 44-56-80 49-60-85 52-64-91 4500 5400 6300 7200 8100 36 41 45 49 52 62-76-108 68-84-118 74-90-128 79-97-137 84-103-145 38-57-81 46-63-89 53-68-96 59-72-102 63-77-109 1125 1350 1575 1800 2025 33-44-62 39-48-68 43-52-74 45-56-79 48-59-83 1688 2025 2363 2700 3038 41-51-72 45-55-78 49-60-85 52-64-91 55-68-96 38-57-81 46-63-89 53-68-96 59-72-102 63-77-109 8000 9600 11200 12800 14400 38 43 47 51 54 83-102-144 91-112-158 99-121-171 105-129-182 112-137-193 51-76-108 61-84-118 71-90-128 79-97-137 84-102-145 2000 2400 2800 3200 3600 44-59-83 52-64-91 57-69-98 61-74-105 64-79-111 3000 3600 4200 4800 5400 55-68-96 60-74-105 65-80-113 70-85-121 74-91-128 51-76-108 61-84-118 71-90-128 79-97-137 84-102-145



F

PERFORMANCE DATA

Neck Velocity Velocity Pressure Total Pressure Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft.


TDV - SQUARE NECK - LOUVERED FACE, INDUCTION VANES - HORIZONTAL DISCHARGE PATTERN

F195

Diffs


PERFORMANCE DATA

F

TDV - ROUND NECK - LOUVERED FACE, INDUCTION VANES - HORIZONTAL DISCHARGE PATTERN Return Factors -SP = 1.1 TP Add 1 to NC S1 6 x S2&G2 6 A3 6" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 9 x S2&G2 9 A3 6" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 9 x S2&G2 9 A3 8" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 12 x S2&G2 12 A3 8" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC

PERFORMANCE DATA

S1 12 x S2&G2 12 A3 10" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC

F196

S1 12 x S2&G2 12 A3 12" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC 15 x 15 12" Round

S1 S2&G2 A3 A4

Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y

78 0.031 9 cfm Throw 78 6-9-17 39 3-5-10 28 3-4-8 19 2-3-6 19 2-3-6 98 0.050 15 cfm Throw 98 7-11-20 49 4-6-12 37 3-5-9 25 3-4-8 25 3-4-8 139 0.032 10 cfm Throw 139 8-12-23 70 4-6-13 52 4-5-10 35 3-4-8 35 3-4-8 174 0.049 16 cfm Throw 174 10-15-26 87 5-8-16 66 4-7-11 44 3-5-10 44 3-5-10 218 0.032 11 cfm Throw 218 10-15-29 109 5-8-16 82 4-7-13 55 3-5-10 55 3-5-10 235 0.020 cfm Throw 235 9-14-27 118 5-7-15 89 4-6-12 59 2-5-10 59 2-5-10 314 0.035 13 cfm Throw 314 12-18-35 157 7-10-20 119 5-8-15 79 4-6-13 79 4-6-13

98 0.050 15 cfm Throw 98 7-11-20 49 4-6-12 37 3-5-9 25 3-4-8 29 3-4-8 117 0.071 20 cfm Throw 117 9-13-21 59 5-7-15 44 4-6-9 29 3-5-9 29 3-5-9 174 0.049 16 cfm Throw 174 10-15-26 87 5-8-16 66 4-7-11 44 3-5-10 44 3-5-10 209 0.071 21 cfm Throw 209 12-18-29 105 6-10-19 79 5-8-13 52 4-6-12 52 4-6-12 272 0.049 17 cfm Throw 272 12-18-33 136 7-10-20 103 6-8-14 68 4-6-13 68 4-6-13 314 0.035 15 cfm Throw 314 12-18-35 157 7-10-20 119 5-8-15 79 4-6-13 79 4-6-13 392 0.055 19 cfm Throw 392 15-23-39 196 8-12-25 148 7-10-17 98 5-8-16 98 5-8-16









Diffs

PERFORMANCE DATA Return Factors -SP = 1.1 TP Add 1 to NC S1 15 x S2&G2 15 A3 14" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 18 x S2&G2 18 A3 6" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 18 x S2&G2 18 A3 8" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 18 x S2&G2 18 A3 10" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 18 x S2&G2 18 A3 12" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC

18 x 18 16" Round

S1 S2&G2 A3 A4











F

PERFORMANCE DATA

S1 18 x S2&G2 18 A3 14" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC

Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y


TDV - ROUND NECK - LOUVERED FACE, INDUCTION VANES - HORIZONTAL DISCHARGE PATTERN

F197

Diffs



F


shall be oriented at 45° angles in opposite directions to ensure rapid mixing of primary and room air. The inner core assembly must be removable in the field without tools for easy installation, cleaning or damper adjustment.

LOUVERED FACE, INDUCTION VANES Available Steel Model: TDV Available Aluminum Model: TDV-AA Ceiling diffs shall be Titus Models TDV (steel) or TDV-AA (aluminum with miscellaneous steel components) for fixed, horizontal discharge pattern. These diffs shall consist of an outer frame assembly of the sizes and mounting types shown on the plans and outlet schedule. A square or rectangular inlet shall be an integral part of the frame assembly and a transition piece shall be available to facilitate attachment of round duct. An inner core assembly consisting of fixed deflection louvers shall be available in one-, two-, three- or four-way horizontal discharge patterns. Steel (TDV) or aluminum (TDV-AA) induction blades shall be welded to each wing of the inner core. The induction blades

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering, or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional damper shall be constructed of heavy gauge steel (aluminum also available). Damper must be operable from the face of the diff by removing the spring loaded inner core assembly. The manufacturer shall provide published performance data for the diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

MODEL NUMBER SPECIFICATION Optional Damper AG-95 Opposed Blade AG-35-B Opposed Blade - Short AG-65-S Opposed Blade - Long AG-65-L Opposed Blade

Model TDV TDV-AA

Sq. or Rect. Neck

Height

XXX-XX

X

White

Width

X

Finish 26 XX

X



Surface Mount

Dropped

XX

XX-XX-X

XXX

EGL EGS Earthquake Tabs EQT Accessories

1-Way

Equalizing Grid - Long

2-Way, Opposite


Blow Pattern 1 2-Way, Opposite 2 2-Way, Corner 2C 3-Way 3 4-Way 4

SPECIFICATIONS

1-Way

F198

Model TDV TDV-AA

Height Sq. or Rect. Neck

XXX-XX

X

Width

X


Snap-In

XX x XX 12 x 12 24 x 24 48 x 24 Module Size

X

XX White

26 Finish

Accessories EGL Equalizing Grid - Short EGS Earthquake Tabs EQT Equalizing Grid - Long

XX

XX-XX-X


XXX

Diffs


Model TDV TDV-AA

Rnd. Neck

XXXX

XX


Module Size (inches) 12 x 12

24 x 24

Backpan Size “A” (inches) 6x6

X

12 x 12 24 x 24 Module Size

XX White

26 Finish

XX

Accessories EG EQT

Equalizing Grid Earthquake Tabs

XX-XXX

D-100 AG-100 Combination AG-65 Butterfly AG-85 Optional Damper (note) Radial Radial

Round

XXX

Inlet Size (inches) 6

6x6

6

9x9

6, 8

12 x 12

8, 10, 12

15 x 15

6, 8, 10, 12, 14

18 x 18

6, 8, 10, 12, 14, 16

Model TDV TDV-AA

Rnd. Neck

XXXX

XX


Border 1 Surface Mount 5 Dropped 6 Beveled X



Snap-In

XX x XX

Inlet Size 6, 8, 10, 12, 14, 16




XX White

26 Finish

Blow Pattern 1-Way 1 2-Way, Opposite 2 2-Way, Corner 2C 3-Way 3 4-Way 4 XX

XX-XXX

F

Accessories Equalizing Grid EG EQT Earthquake Tabs XXX



6x6

6

9x9

6, 8 8, 10, 12

15 x 15 18 x 18

6, 8, 10, 12, 14 6, 8, 10, 12, 14, 16


SPECIFICATIONS

12 x 12

F199


TDV-NT, TDV-AA-NT


LOUVERED FACE, INDUCTION VANES, NARROW TEE Available Models: TDV-NT TDV-AA-NT

Duct Size A Duct Size minus ⅛" 2⅛"

• Steel • Aluminum 1½"

⅜"

23⅜" 24"

SUGGESTED SPECIFICATIONS adjustment. Steel (TDV-NT) or aluminum (TDV-AA-NT) induction blades shall be welded to each wing of the inner core. The induction blades shall be oriented at 45° angles in opposite directions to ensure rapid mixing of primary and room air. The inner core assembly must be removable in the field without tools for easy installation, cleaning or damper adjustment.


F

LOUVERED FACE, INDUCTION VANES, NARROW TEE Available Steel Model: TDV-NT • Fixed Discharge Available Aluminum Model: TDV-AA-NT


Ceiling diffs shall be Titus Model TDV-NT (steel) or TDVAA-NT (aluminum with miscellaneous steel components) for a fixed, horizontal discharge pattern. Diff shall be compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems. These diffs shall consist of an outer frame assembly of the sizes and mounting types shown on the plans and outlet schedule.

Optional damper shall be constructed of heavy gauge steel (aluminum also available). Damper must be operable from the face of the diff by removing the spring loaded inner core assembly.

A square or rectangular inlet shall be an integral part of the frame assembly and a transition piece shall be available to facilitate attachment of round duct. An inner core assembly consisting of fixed deflection louvers shall be available in one-, two-, three- or four-way horizontal discharge patterns.

The manufacturer shall provide published performance data for the diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.

The inner core assembly must be removable in the field without tools for easy installation, cleaning, or damper

TDV-NT, TDV-AA-NT


F200

TDV-NT, TDV-AA-NT

Diffs


Model TDV-NT TDV-AA-NT

Height Square Neck

XXX-XX-XX Width

White

X

X

Optional Damper AG-35-B Opposed Blade - Short AG-65-S Opposed Blade - Long AG-65-L Opposed Blade

24 x 24 Module Size

Finish 26 X

XX


XX-XX-X

XXX

EGL EGS Earthquake Tabs EQT Accessories

1-Way


2-Way, Opposite


Diffs


Model TDV-NT TDV-AA-NT

Round Neck

XXX-XX-XX

XX

Inlet Size


24 x 24


6, 8, 10, 12, 14, 16



6x6

6

9x9

6, 8

12 x 12

8, 10, 12

15 x 15

6, 8, 10, 12, 14

18 x 18

6, 8, 10, 12, 14, 16

White

Finish 26

Optional Damper (note) Radial D-100 Radial AG-100 Combination AG-65 Butterfly AG-85

24 x 24

XX

XX

Module Size

2-Way, Opposite


XX-XXX

XXX EG EQT Accessories





F

SPECIFICATIONS F201

Diffs

F

TDX, TDX-AA LOUVERED FACE, INDUCTION NOZZLES

• Model TDX ia a high capacity ceiling diff that maintains a continuous horizontal flow from maximum cfm down to minimum cfm, making it an excellent choice for variable air volume applications. • Model TDX is extremely flexible, with cores available for one-, two-, three- or four-way horizontal flow.

Available Steel Model: TDX Available Aluminum Model: TDX-AA Products Include: • Standard Finish - #26 White. • The Titus TDX and TDX-AA have louvered faces with integrated induction nozzles for exceptional air mixing.

• Core is easily removable from the face of the diff. • Slot operator on the optional Model AG-95 damper allows easy volume adjustment. (Square necks only).

BORDER TYPES Border Type 2 (Snap-In)

2⅛"

TDX, TDX-AA



• Material is heavy gauge steel or aluminum with miscellaneous steel components. • For a uniform face appearance on all round neck sizes, specify an 18 x 18-inch dimension ‘A’ size and the desired round neck size. This is available in 24 x 24-inch lay-in module size only.

Border Type 1 (Surface Mount) Square Neck Ceiling Opening = A plus 3½"

13/16"

Duct Size A Duct Size minus ⅛"

Ceiling Module

2⅛"

Border Type 3 (Lay-In) Ceiling Module

1½" ¼"

2⅛"

A plus 59/16"

Border Type 1 (Surface Mount) Round Neck Ceiling Opening = A plus 3½" A Duct Size, diameter


TDX, TDX-AA



1⅜" 3⅞"

⅜" ⅜"

2⅛"

1½" ¼"

A plus 59/16"

Ceiling Module

F202


Diffs

DIMENSIONS


Border Type 6 (Bevel Drop Face)

Border Type 5 (Dropped Face)

Duct Size plus 1"

Duct Size plus ¼"

⅞"

2½"

7/16"

2⅛"

* A plus 5" * A plus 5½"

Note: Standard diff is 2½ inches deep.

AVAILABLE DUCT SIZES - SQUARE AND RECTANGULAR NECKS Border Types 1, 5, 6 Minimum Maximum Duct Size Duct Size A A

Duct Size A

9x9

18 x 18

Border Types 2, 3, 4 Available Minimum Maximum Module Duct Size A Duct Size A Size 24 x 24 6x6 18 x 18 48 x 24 12 x 12

F

Note 1: Duct sizes are available in 3” increments only.


Border Types 1, 5, 6 Dimension Available Round A Duct Size 9x9 6, 8 12 x 12 8, 10, 12 15 x 15 10, 12, 14 18 x 18 12, 14, 16

A Duct Size

Note: Round duct sizes are available only in sizes shown.

Border Types 2, Available Dimension Module A Size 9x9 12 x 12 24 x 24 15 x 15 18 x 18

3, 4 Available Round Duct Size 6, 8 8, 10, 12 10, 12, 14 12, 14, 16

Note 1: Round duct sizes are available only in sizes shown.




S1

1 Way

S2

2 Way

G2

2 Way Corner

A3

3 Way

A4

4 Way

DIMENSIONS

OPTIONAL PATTERNS


F203

Diffs

TDX (High Induction-Circular Pattern) vs. TDV (Cross Pattern) 12 x 12 Core, A4 Pattern (@ 20 BTU/hr. ft2, Floor Heat Load)

100 TDX -- 98% ADPI

95 90

ADPI [%]


TDX ADPI Comparison

TDV -- 92% ADPI

85 80 75 70 65

F

60 0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

T50/L Note: See ‘ADPI - Air Diffusion Performance Index’ in the Engineering Guidelines section for detailed information.

TDX ADPI COMPARISON

F204

Diffs

TDX , TDV & TDC Comparison Model TDV Square Neck Induction Ratio Delta T = 20BF

Neck Velocity = 250 fpm

Throw [Feet] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Model TDC Square Neck Induction Ratio Delta T = 20BF


Induction Ratio [non-DIM] 1.2 1.4 1.9 2.7 3.9 5.5 8.0 11.8 17.7 26.4 39.0 56.6 80.5 112.0 153.0

Troom = 75°F Tsupply = 55°F

Throw [Feet] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15



Throw [Feet] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15



Model TDX Square Neck Induction Ratio Delta T = 20BF

Induction Ratio = [ (Troom - Tsupply)/(Troom - Tthrow)] - 1 (250 cfm, 12 x 12, A4 Pattern)

4-Way TDX, TDV & TDC Comparison Table

(250 cfm, 12 x 12 Core, A4 Pattern) T150 - TDX

1'

2'

3'

4'

5'

T150 - TDV

6'

7'

8'

F

T150 - TDC

Distance from Diff Center TDX (20F, ∆T) 55F Supply Temp.

TDX, TDV, TDC COMPARISON

TDV (20F, ∆T) 55F Supply Temp.

TDC (20F, ∆T) 55F Supply Temp.

1‘

2‘

3‘

4‘

5‘

6‘

7‘

8‘

Jet Velocity (fpm) 326

245

200

172

144

123

105

90

Jet Temperature (F)

66

67

68

70

71

73

74

75


427

316

273

231

183

154

119


60

62

64

66

68

69

71

72


436

330

292

240

199

161

128


58

62

63

66

67

69

70

Notes: 1. ‘x’ Data taken 1” below ceiling. 2. Temperature: Room 75°F, Supply 55°F.

57

At 55°F supply air, jet temperature from the TDX increases more rapidly than from the TDC and TDV, illustrating the effect of induction performance with this diff. Elevation views shown above demonstrate the ability of the TDX to provide greater temperature equalization in the occupied space. This provides for an extremely high ADPI lever which translates into an exceptional comfort for occupants.

F205

Diffs


PERFORMANCE DATA ISOTHERMAL TDX - LOUVERED FACE, INDUCTION NOZZLES - SQUARE NECK Inlet Duct Size

9" x 9"

12" x 12"

F 15" x 15"

PERFORMANCE DATA

18" x 18"

F206

Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft.

200 0.003 0.027 113 5-7-13 3-5-10 28 3-5-8 42 4-6-10 3-5-7 200 6-9-15 4-6-13 50 3-6-9 75 4-8-11 3-6-9 313 9-12-18 5-8-13 78 4-7-11 117 6-9-13 4-7-11 450 10-15-22 8-11-20 113 5-7-13 169 7-10-15 5-7-13


250 0.004 0.043 141 6-8-14 4-6-11 35 4-6-8 53 5-7-11 4-6-8 250 11 7-11-17 5-8-15 63 5-7-10 94 6-9-13 5-7-10 391 15 11-14-20 6-10-15 98 5-8-12 146 8-11-15 6-8-12 563 17 13-17-24 9-14-22 141 6-9-14 211 8-12-17 6-9-14

300 0.006 0.062 169 13 7-10-16 5-8-12 42 5-7-9 63 6-8-12 5-6-9 300 17 9-13-19 6-10-16 75 6-8-11 113 8-10-14 6-8-11 469 21 12-15-22 8-11-17 117 7-9-13 176 9-12-16 7-9-13 675 23 15-19-27 11-17-24 169 7-11-15 253 10-13-19 7-11-15

350 0.008 0.084 197 19 8-12-17 6-9-13 49 5-7-10 74 7-9-13 6-7-10 350 22 10-14-20 8-11-18 88 7-8-12 131 9-11-15 7-8-12 547 26 13-16-23 9-13-18 137 8-10-14 205 10-13-18 8-10-14 788 28 17-20-29 13-18-26 197 9-12-17 295 12-14-20 9-12-17

400 0.010 0.110 225 23 9-13-18 7-10-14 56 6-8-11 84 8-10-13 6-7-11 400 27 11-15-21 9-13-19 100 7-9-13 150 9-11-16 7-9-12 625 30 14-18-25 10-13-19 156 9-11-15 234 11-13-19 9-11-15 900 33 18-22-31 15-20-28 225 10-13-18 338 13-15-22 10-13-18

500 0.016 0.171 281 31 11-14-20 9-11-15 70 7-8-12 105 9-11-15 7-8-12 500 35 14-17-24 11-15-21 125 8-10-14 188 10-13-18 8-10-14 781 38 16-20-28 12-15-21 195 10-12-17 293 12-15-21 10-12-17 1125 40 20-24-35 18-22-31 281 11-14-20 422 14-17-24 11-14-20

600 0.022 0.247 338 37 13-16-22 10-12-17 84 8-9-13 127 10-12-17 7-9-13 600 41 15-19-26 13-16-23 150 9-11-15 225 11-14-20 9-11-15 938 44 18-22-30 13-17-23 234 11-13-18 352 13-16-23 11-13-19 1350 47 22-27-38 20-24-34 338 13-15-22 506 15-19-27 13-15-22


Diffs

PERFORMANCE DATA

Backpan Size

Inlet Duct Size

6" Round

9" x 9"

8" Round

Backpan Size

Inlet Duct Size

8" Round

12" x 12"

10" Round

200 0.003 0.015 39 1-2-4 1-2-4 10 0-1-2 15 1-2-3 0-1-2 70 3-5-9 3-4-8 17 2-3-5 26 3-4-6 2-3-5

250 0.004 0.024 49 1-2-5 2-2-5 12 1-1-3 18 1-2-4 1-1-3 87 4-6-10 3-5-9 22 2-3-6 33 3-5-7 2-3-7

300 0.006 0.034 59 2-3-6 2-3-6 15 1-2-3 22 2-2-5 1-2-3 105 13 5-7-11 4-6-11 26 3-4-7 39 4-5-8 3-4-7

350 0.008 0.046 69 2-3-7 2-3-7 17 1-2-4 26 2-3-5 1-2-4 122 18 5-8-12 4-7-12 31 3-4-8 46 5-6-8 3-5-8

400 0.010 0.061 79 3-4-8 3-4-8 20 1-2-4 29 2-3-6 1-2-4 140 23 6-9-13 5-8-12 35 3-5-8 52 5-6-9 3-5-9

450 500 0.013 0.016 0.077 0.095 88 98 12 16 3-4-9 3-5-10 3-4-8 3-5-9 22 25 2-2-5 2-3-5 33 37 2-4-6 3-4-6 2-3-5 2-3-6 157 175 27 30 7-10-14 8-10-14 6-8-13 6-9-14 39 44 4-6-9 4-6-9 59 65 5-7-9 6-7-10 4-6-9 4-7-10

Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft.

200 0.003 0.021 70 2-3-7 1-3-6 17 1-2-4 26 2-3-6 1-2-4 109 2-4-9 2-4-8 27 1-3-5 41 2-4-7 1-3-5 157 2-5-10 2-4-9 39 2-3-6 59 3-4-9 2-3-7

250 0.004 0.033 87 3-4-8 2-4-7 22 2-2-5 33 2-4-7 1-2-5 136 3-5-11 3-5-11 34 2-3-7 51 3-4-9 2-3-7 196 4-7-13 3-6-12 49 3-4-8 74 4-6-11 3-4-8

300 0.006 0.047 105 13 3-5-10 3-4-8 26 2-3-5 39 3-4-7 2-3-6 164 15 4-6-13 4-6-13 41 3-4-8 61 4-5-11 3-4-8 236 16 5-8-16 4-7-14 59 3-5-10 88 4-7-12 3-5-10

350 0.008 0.065 122 18 4-6-12 3-5-10 31 2-3-6 46 3-5-8 2-3-7 191 20 5-8-15 5-7-14 48 3-5-9 72 4-6-12 3-5-9 275 21 6-9-18 5-8-16 69 4-6-11 103 5-8-13 4-6-11

400 0.010 0.084 140 23 4-7-13 4-6-11 35 2-4-7 52 4-6-9 3-4-8 218 25 6-9-17 6-8-15 55 4-5-9 82 5-7-12 4-5-9 314 26 7-10-21 6-9-18 79 4-6-12 118 6-9-14 4-7-11

450 0.013 0.107 157 27 5-8-13 4-6-13 39 3-4-8 59 4-6-9 3-4-9 245 29 6-10-19 6-10-16 61 4-6-10 92 5-8-13 4-6-10 353 30 8-12-24 7-10-21 88 5-7-13 133 7-10-15 5-7-12


500 0.016 0.132 175 30 6-8-14 5-7-14 44 3-5-9 65 5-7-10 3-5-9 273 32 7-11-21 7-11-17 68 4-7-10 102 6-9-14 5-7-10 393 34 9-13-26 8-12-23 98 5-8-14 147 7-11-16 6-8-13


F

PERFORMANCE DATA

12" Round

Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft.


ISOTHERMAL TDX - LOUVERED FACE, INDUCTION NOZZLES - ROUND NECK

F207

Diffs


PERFORMANCE DATA ISOTHERMAL TDX - LOUVERED FACE, INDUCTION NOZZLES - SQUARE NECK Backpan Size

Inlet Duct Size

10" Round

15" x 15"

F

12" Round

14" Round

Backpan Size

Inlet Duct Size

12" Round

PERFORMANCE DATA

18" x 18"

F208

14" Round

16" Round


400 0.010 0.082 218 5-7-15 5-7-12 55 3-5-8 82 4-6-11 3-5-8 314 18 6-9-18 5-8-15 79 4-6-11 118 5-8-12 4-6-10 428 26 8-13-21 7-11-21 107 5-8-13 160 7-10-15 5-8-12

450 0.013 0.104 245 12 6-8-16 5-8-12 61 4-5-9 92 5-7-11 4-5-8 353 22 7-10-19 6-9-17 88 4-6-11 133 6-9-13 4-7-11 481 30 9-14-22 8-12-22 120 6-9-13 180 8-11-16 6-9-13

500 550 600 650 0.016 0.019 0.022 0.026 0.129 0.156 0.186 0.218 273 300 327 355 15 19 22 24 6-9-17 7-10-17 7-11-18 8-12-19 6-9-13 6-10-14 7-10-14 8-10-15 68 75 82 89 4-6-9 4-6-9 5-7-10 5-7-10 102 112 123 133 5-8-12 6-9-13 6-9-13 7-10-14 4-6-9 4-7-9 5-7-10 5-7-10 393 432 471 511 25 28 31 34 7-11-20 8-12-21 9-13-22 10-15-23 6-10-19 7-11-20 8-12-21 8-12-22 98 108 118 128 5-7-12 5-8-12 6-8-13 6-9-14 147 162 177 191 7-10-14 7-10-14 8-11-15 8-11-16 5-7-11 5-8-12 6-9-12 6-9-13 535 588 641 695 34 37 40 42 10-16-24 11-17-25 13-18-26 14-19-27 9-13-23 10-15-24 11-16-25 12-17-26 134 147 160 174 7-10-14 7-10-15 8-11-15 9-11-16 200 220 241 261 9-12-16 10-12-17 10-13-18 11-13-19 7-9-13 8-10-14 8-10-15 9-11-15

700 0.031 0.252 382 27 9-13-20 8-11-15 95 5-8-11 143 7-10-14 6-7-11 550 36 10-16-23 9-13-23 137 7-10-14 206 9-11-16 7-9-13 748 45 15-20-28 13-19-27 187 9-12-17 281 11-14-19 9-11-16


600 0.022 0.209 471 30 7-11-15 6-9-14 118 5-7-11 177 7-9-13 5-7-10 641 38 10-13-18 9-12-17 160 7-9-13 241 9-11-15 7-9-12 838 45 13-17-24 11-15-22 209 8-12-17 314 11-14-20 9-11-16

650 0.026 0.245 511 32 8-11-16 7-10-15 128 5-8-11 191 7-9-13 5-8-11 695 41 11-14-19 9-13-18 174 7-10-14 261 9-11-16 7-9-13 908 48 14-18-25 11-16-23 227 9-12-18 340 12-14-20 9-12-16

700 0.031 0.284 550 35 9-12-17 7-11-15 137 6-8-12 206 8-10-14 6-8-11 748 43 12-14-20 10-13-18 187 8-10-14 281 9-12-16 8-9-13 977 50 15-18-26 12-17-24 244 10-13-18 367 12-15-21 10-12-17

900 0.051 0.470 707 43 11-13-18 9-12-17 177 7-10-13 265 9-11-15 7-9-13 962 52 13-16-23 12-15-21 241 9-11-16 361 11-13-19 9-11-15 1257 59 17-21-29 15-19-27 314 12-15-21 471 14-17-24 11-14-19


750 0.035 0.326 589 37 9-12-17 8-11-16 147 6-9-12 221 8-10-14 6-8-12 802 45 12-15-21 11-13-19 200 8-10-15 301 10-12-17 8-10-14 1047 52 15-19-27 13-17-24 262 10-13-19 393 13-15-22 10-13-18

800 0.040 0.371 628 39 10-13-18 8-12-16 157 6-9-13 236 8-10-15 7-8-12 855 48 12-15-21 11-14-20 214 9-11-15 321 10-12-18 8-10-14 1117 55 16-19-27 14-18-25 279 11-14-20 419 13-16-23 11-13-18

850 0.045 0.419 668 41 11-13-18 9-12-17 167 7-9-13 250 9-11-15 7-9-12 909 50 13-16-22 12-14-20 227 9-11-16 341 10-13-18 8-10-15 1187 57 16-20-28 15-18-26 297 12-14-20 445 13-16-23 11-13-19


Diffs

PERFORMANCE DATA

Inlet Duct Size

9" x 9"

12" x 12"

15" x 15"

18" x 18"

Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft.

200 0.003 0.027 113 4-6-10 3-4-7 28 3-4-6 42 3-5-7 3-4-6 200 5-7-12 4-6-10 50 3-5-7 75 5-7-9 3-5-7 313 7-9-13 4-7-10 78 4-6-8 117 5-7-10 4-6-9 450 9-12-16 6-10-14 113 4-6-9 169 6-8-12 4-6-9

300 0.006 0.062 169 13 6-8-12 4-6-9 42 4-5-7 63 5-6-9 4-5-7 300 17 7-10-14 6-8-12 75 5-6-9 113 7-8-12 5-6-9 469 21 9-11-16 7-9-12 117 6-7-10 176 7-9-12 6-8-11 675 23 12-14-20 10-12-17 169 6-8-11 253 8-10-14 6-8-11

350 0.008 0.084 197 19 7-9-13 5-7-10 49 4-5-7 74 5-7-9 4-5-7 350 22 8-11-16 6-9-13 88 5-7-10 131 7-9-12 6-7-10 547 26 10-12-17 8-9-13 137 6-7-11 205 8-9-13 7-9-12 788 28 13-15-22 11-13-18 197 7-9-12 295 9-11-16 7-9-12

400 0.010 0.110 225 23 8-10-14 6-7-10 56 5-6-8 84 6-7-10 5-6-8 400 27 10-12-17 7-10-14 100 6-7-10 150 8-9-13 6-7-11 625 30 11-13-19 8-10-14 156 7-8-11 234 8-10-14 7-9-13 900 33 13-16-23 11-14-20 225 8-9-13 338 10-12-17 8-9-13

500 0.016 0.171 281 31 9-11-15 7-8-11 70 5-6-9 105 7-8-11 5-6-9 500 35 11-13-19 9-11-16 125 7-8-12 188 9-11-15 7-8-12 781 34 12-15-21 9-11-16 195 7-9-13 293 9-11-16 8-10-15 1125 40 15-18-26 13-16-22 281 8-10-15 422 11-13-19 9-10-15

600 0.022 0.247 338 37 10-12-17 7-9-12 84 6-7-10 127 7-9-12 6-7-10 600 41 12-14-20 10-12-17 150 7-9-13 225 9-12-16 7-9-13 938 38 13-16-23 10-12-18 234 8-10-14 352 10-12-17 9-11-16 1350 47 16-20-28 14-17-24 338 9-11-16 506 12-14-20 9-11-16

• Dash (-) in space denotes an NC value less than 10. • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. • Throw values given are for cooling conditions.

F

PERFORMANCE DATA

• All pressures are in inches of water. • Throw velocities given are for 20B cooling at terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB.

250 0.004 0.043 141 5-7-11 4-5-8 35 3-4-6 53 4-6-8 3-4-6 250 11 6-9-13 5-7-11 63 4-6-8 94 6-7-11 4-6-8 391 15 9-10-15 5-8-11 98 5-6-9 146 7-8-11 5-7-10 563 17 11-13-18 8-11-16 141 5-7-10 211 7-9-13 5-7-10


20DT COOLING TDX - LOUVERED FACE, INDUCTION NOZZLES - SQUARE NECK

F209

Diffs


PERFORMANCE DATA 20DT COOLING TDX - LOUVERED FACE, INDUCTION NOZZLES - ROUND NECK Backpan Inlet Duct Size Size

6" Round

9" x 9"

8" Round

F

Backpan Inlet Duct Size Size

8" Round

PERFORMANCE DATA

12" x 12"

F210

10" Round

12" Round

Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft.

200 0.003 0.024 39 1-2-3 1-2-3 10 0-1-2 15 1-1-3 0-1-2 70 3-4-7 2-3-6 17 1-2-4 26 2-3-5 1-2-4

250 0.004 0.037 49 1-2-4 1-2-3 12 1-1-2 18 1-2-3 1-1-2 87 3-5-8 3-4-7 22 2-3-5 33 3-4-5 2-3-5

300 0.006 0.053 59 2-2-5 2-2-4 15 1-1-3 22 1-2-4 1-1-3 105 13 4-6-8 3-5-8 26 2-3-5 39 3-4-6 2-3-6

350 0.008 0.073 69 2-3-6 2-3-4 17 1-2-3 26 2-2-4 1-2-3 122 18 5-6-9 4-6-9 31 2-4-6 46 4-4-6 3-4-6

400 0.010 0.095 79 2-3-6 2-3-4 20 1-2-4 29 2-3-4 1-2-4 140 23 5-7-10 4-6-9 35 3-4-6 52 4-5-7 3-4-6


200 0.003 0.024 70 2-3-6 1-2-5 17 1-2-3 26 2-2-5 1-2-3 109 2-4-7 1-3-6 27 1-2-5 41 2-3-6 1-2-5 157 2-4-9 2-4-8 39 2-3-6 59 3-4-7 2-3-6

250 0.004 0.037 87 2-4-7 2-3-6 22 1-2-4 33 2-3-5 1-2-4 136 3-5-9 2-4-8 34 2-3-6 51 2-4-6 2-3-5 196 4-6-11 3-5-10 49 2-4-7 74 3-5-8 2-4-6

300 0.006 0.053 105 13 3-4-8 2-4-6 26 2-2-5 39 2-4-6 2-2-5 164 15 4-5-10 3-5-9 41 2-3-6 61 3-4-7 2-3-6 236 16 4-7-13 4-6-12 59 3-4-7 88 4-6-9 3-4-7

350 0.008 0.073 122 18 3-5-9 3-4-7 31 2-3-5 46 3-4-6 2-3-6 191 20 4-6-11 4-5-9 48 3-4-7 72 3-5-8 3-4-6 275 21 5-8-15 5-7-13 69 3-5-8 103 4-7-9 3-5-8

400 450 500 0.010 0.013 0.016 0.095 0.120 0.148 140 157 175 23 27 30 4-6-9 4-6-10 5-7-11 3-5-7 4-5-8 4-6-8 35 39 44 2-3-6 2-3-6 3-4-7 52 59 65 3-5-6 4-5-7 4-5-7 2-3-6 2-4-7 3-4-7 218 245 273 25 29 32 5-7-12 5-8-13 6-9-13 4-6-10 5-7-11 5-8-11 55 61 68 3-5-7 3-5-7 4-6-8 82 92 102 4-6-8 4-6-9 5-6-9 3-5-7 3-5-7 4-5-8 314 353 393 26 30 34 6-9-16 7-10-17 7-11-18 5-8-14 6-9-15 7-10-16 79 88 98 4-6-8 4-6-9 5-7-9 118 133 147 5-7-10 6-7-10 6-8-11 4-6-8 4-6-9 5-6-9

• All pressures are in inches of water. • Throw velocities given are for 20B cooling at terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB.

450 0.013 0.120 88 12 2-4-7 2-3-5 22 1-2-4 33 2-3-5 1-2-4 157 27 6-7-10 5-7-10 39 3-5-6 59 4-5-7 3-5-7

500 0.016 0.148 98 16 3-4-7 3-3-5 25 2-2-5 37 2-3-5 2-2-5 175 30 6-8-11 5-7-10 44 4-5-7 65 4-5-7 4-5-7

• Dash (-) in space denotes an NC value less than 10. • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. • Throw values given are for cooling conditions.

Diffs

PERFORMANCE DATA

Backpan Size

Inlet Duct Size

10" Round

15" x 15"

12" Round

14" Round

Backpan Size

Inlet Duct Size

12" Round

18" x 18"

14" Round

• • • •

400 0.010 0.095 218 4-6-11 4-6-9 55 3-4-6 82 4-5-8 3-4-6 314 18 5-8-13 4-7-13 79 3-5-8 118 4-7-9 3-5-7 428 26 7-11-16 6-9-15 107 4-7-9 160 6-8-11 5-6-9


600 650 700 750 800 850 0.022 0.026 0.031 0.035 0.040 0.045 0.213 0.250 0.290 0.333 0.379 0.428 471 511 550 589 628 668 29 32 34 37 39 41 6-8-12 7-9-12 7-9-13 7-9-13 8-9-13 8-10-14 5-8-11 6-8-11 6-8-12 7-8-12 7-9-12 7-9-13 118 128 137 147 157 167 4-6-8 4-6-9 5-6-9 5-7-9 5-7-10 6-7-10 177 191 206 221 236 250 6-7-10 6-7-10 6-7-10 6-8-11 6-8-11 7-8-11 4-5-8 5-6-8 5-6-8 5-6-9 5-6-9 5-6-9 641 695 748 802 855 909 38 41 43 45 48 50 8-10-14 8-10-14 9-11-15 9-11-15 9-11-16 10-12-16 7-9-13 8-9-13 8-10-14 8-10-14 8-10-15 9-11-15 160 174 187 200 214 227 6-7-10 6-7-10 6-8-11 6-8-11 7-8-11 7-8-12 241 261 281 301 321 341 7-8-11 7-8-12 7-9-12 7-9-13 8-9-13 8-10-14 5-7-9 6-7-10 6-7-10 6-7-10 6-8-11 6-8-11 838 908 977 1047 1117 1187 42 45 47 50 52 54 10-13-18 11-13-19 11-14-19 12-14-20 12-15-21 12-15-21 9-12-16 10-12-17 10-13-18 11-13-18 11-13-19 11-14-20 209 227 244 262 279 297 7-9-13 8-9-13 8-10-14 8-10-14 8-10-15 9-11-15 314 340 367 393 419 445 8-10-15 9-11-15 9-11-16 9-12-16 10-12-17 10-12-17 7-8-12 7-9-12 7-9-13 8-9-13 8-10-14 8-10-14

All pressures are in inches of water. Throw velocities given are for 20B cooling at terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB. Dash (-) in space denotes an NC value less than 10.

450 0.013 0.120 245 12 5-7-12 5-7-9 61 3-5-6 92 4-6-9 3-4-6 353 22 6-9-14 5-7-14 88 4-5-8 133 5-7-10 4-6-8 481 30 8-12-17 7-10-16 120 5-7-10 180 7-8-12 5-7-9

• •

500 0.016 0.148 273 15 5-8-12 5-7-10 68 3-5-7 102 4-6-9 3-5-7 393 25 6-9-15 5-8-14 98 4-6-9 147 6-7-10 4-6-8 535 34 9-13-18 8-11-17 134 6-8-11 200 7-9-12 6-7-10

550 600 650 700 0.019 0.022 0.026 0.031 0.179 0.213 0.250 0.290 300 327 355 382 19 22 24 27 6-9-13 6-9-14 7-10-14 7-10-15 6-7-10 6-8-11 6-8-11 7-8-12 75 82 89 95 4-5-7 4-5-7 4-5-8 5-6-8 112 123 133 143 5-7-10 5-7-10 6-7-10 6-8-11 4-5-7 4-5-7 4-5-8 5-6-8 432 471 511 550 28 31 34 36 7-10-16 8-11-16 8-12-17 9-12-18 6-9-15 7-10-16 7-11-16 8-11-17 108 118 128 137 4-7-9 5-7-10 5-7-10 6-7-11 162 177 191 206 6-8-11 7-8-11 7-8-12 7-9-12 5-6-9 5-6-9 5-7-9 6-7-10 588 641 695 748 37 40 42 45 10-13-19 11-14-19 12-14-20 12-15-21 8-13-18 9-13-19 10-14-20 11-14-20 147 160 174 187 6-8-11 7-8-12 7-9-12 7-9-13 220 241 261 281 7-9-13 8-10-13 8-10-14 8-10-15 6-7-10 6-8-11 7-8-11 7-8-12 900 0.051 0.480 707 43 8-10-14 8-9-13 177 6-7-10 265 7-8-12 5-7-9 962 52 10-12-17 9-11-16 241 7-9-12 361 8-10-14 7-8-11 1257 56 13-15-22 12-14-20 314 9-11-16 471 10-13-18 8-10-15

Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Throw values given are for cooling conditions.

F

PERFORMANCE DATA

16" Round



20DT COOLING TDX - LOUVERED FACE, INDUCTION NOZZLES - ROUND NECK

F211

Diffs



F


nozzles shall be oriented at 45° angles in split opposite directions to ensure rapid mixing of primary and room air. The inner core assembly must be removable in the field without tools for easy installation, cleaning or damper adjustment.

LOUVERED FACE, INDUCTION NOZZLES Available Steel Model: TDX Available Aluminum Model: TDX-AA Ceiling diffs shall be Titus Models TDX (steel) or TDX-AA (aluminum with miscellaneous steel components) for fixed, horizontal discharge pattern. These diffs shall consist of an outer frame assembly of the sizes and mounting types shown on the plans and outlet schedule. A square inlet shall be an integral part of the frame assembly and a transition piece shall be available to facilitate attachment of round duct. An inner core assembly consisting of fixed deflection louvers shall be available in one-, two-, three- or four-way horizontal discharge patterns. Steel (TDX), or aluminum (TDX-AA), induction nozzles shall be welded to each wing of the inner core. The induction

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to H. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. Optional damper shall be constructed of heavy gauge steel (aluminum also available). Damper must be operable from the face of the diff by removing the spring loaded inner core assembly. The manufacturer shall provide published performance data for the diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


Model TDX TDX-AA

Height Square Neck White

XXX-XX

X

Width

X

SPECIFICATIONS

X


XX

XX


Surface Mount

Dropped

F212

Finish 26

XX-XX-X

EGL EGS Earthquake Tabs EQT Duct Adapter DA Accessories

1-Way


2-Way, Opposite



Model TDX TDX-AA

Height Square Neck

XXX-XX Width

X

X

XXX

Border Snap-In 2 Lay-In 3 Spline 4 XX x XX 24 x 24 48 x 24 Module Size

X

XX White

26 Finish

Accessories EGL Equalizing Grid - Short EGS Earthquake Tabs EQT Duct Adapter DA Equalizing Grid - Long

XX

XX-XX-X


XXX

Diffs


Model TDX TDX-AA

Backpan Size 9x9 12 x 12 15 x 15 18 x 18

Round Neck

XXX-XX

XX

XX x XX

Module Size (inches) 24 x 24

Model TDX TDX-AA

X

24 x 24 Module Size

Backpan Size “A” (inches) 9x9

Inlet Size (inches)

12 x 12

8, 10, 12

15 x 15

10, 12, 14

18 x 18

12, 14, 16

XX White

26 Finish

XX

Accessories EG EQT


XX-XXX


Round

XXX

6, 8

Round Neck

XXX-XX


Snap-In

XX x XX

Inlet Size 6, 8, 10, 12, 14, 16




XX


Border 1 Surface Mount 5 Dropped 6 Beveled X

Inlet Size 6, 8, 10, 12, 14, 16

XX White

26 Finish

Blow Pattern 1-Way 1 2-Way, Opposite 2 2-Way, Corner 2C 3-Way 3 4-Way 4 XX

XX-XXX

F

Accessories Equalizing Grid EG EQT Earthquake Tabs XXX


Round


Inlet Size (inches)

9x9 12 x 12

6, 8 8, 10, 12

15 x 15 18 x 18

10, 12, 14 12, 14, 16


SPECIFICATIONS F213


TDX-NT, TDX-AA-NT


LOUVERED FACE, INDUCTION NOZZLES, NARROW TEE Available Models: TDX-NT TDX-AA-NT

2⅛"


23⅜" 24"

SUGGESTED SPECIFICATIONS SQUARE AND RECTANGULAR CEILING DIFFS

adjustment. Steel (TDX-NT) or aluminum (TDX-AA-NT) induction nozzles shall be welded to each wing of the inner core. The induction nozzles shall be oriented at 45° angles in split opposite directions to ensure rapid mixing of primary and room air. The inner core assembly must be removable in the field without tools for easy installation, cleaning or damper adjustment.

LOUVERED FACE, INDUCTION NOZZLES, NARROW TEE

F

Available Steel Model: TDX-NT Available Aluminum Model: TDX-AA-NT


Ceiling diffs shall be Titus Model TDX-NT (steel) or TDXAA-NT (aluminum with miscellaneous steel components) for a fixed, horizontal discharge pattern. Diff shall be compatible with 24 x 24-inch modules for regressed narrow tee ceiling systems. These diffs shall consist of an outer frame assembly of the sizes and mounting types shown on the plans and outlet schedule.

Optional damper shall be constructed of heavy gauge steel (aluminum also available). Damper must be operable from the face of the diff by removing the spring loaded inner core assembly.

TDX-NT, TDX-AA-NT

A square inlet shall be an integral part of the frame assembly and a transition piece shall be available to facilitate attachment of round duct. An inner core assembly consisting of fixed deflection louvers shall be available in one-, two-, three- or four-way horizontal discharge patterns. The inner core assembly must be removable in the field without tools for easy installation, cleaning, or damper

F214

TDX-NT, TDX-AA-NT

Diffs


The manufacturer shall provide published performance data for the diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


Model TDX-NT TDX-AA-NT

Height Square Neck

XXX-XX-XX Width

White

X

X

24 x 24 Module Size

Finish 26 X

XX


XX-XX-X

XXX

EGL EGS Earthquake Tabs EQT Duct Adapter DA Accessories

1-Way


2-Way, Opposite


Diffs


Model TDX-NT TDX-AA-NT

Round Neck

XXX-XX-XX

XX

Backpan Size 9x9 12 x 12 15 x 15 18 x 18 XX x XX

Inlet Size 6, 8, 10, 12, 14, 16 Module Size (inches)

24 x 24



9x9

6, 8

12 x 12

8, 10, 12

15 x 15

10, 12, 14

18 x 18

12, 14, 16

White

Finish 26

Optional Damper (note) Radial D-100 Radial AG-100 Combination AG-65 Butterfly AG-85

24 x 24

XX

XX

Module Size

2-Way, Opposite


XX-XXX

XXX EG EQT Accessories





F

SPECIFICATIONS F215

Diffs

F

250, 250-AA ADJUSTABLE, ONE-, TWO-, THREE- OR FOUR-WAY DISCHARGE PATTERN Available Models: 250 250-AA

• Excellent for variable air volume applications. • For Border Type 1, the one-way discharge pattern is available in duct sizes 6 x 4 inches through 36 x 36 inches. The two-, three-, and four-way patterns are available in duct sizes 6 x 6 inches through 36 x 36 inches.


Products Include: • Standard Finish - #26 White. • Optional Finish - #01 Aluminum. • Titus Models 250 and 250-AA present a clean, functional, strong appearance, along with high performance.

• Louvers are individually adjustable from the face of the diff. The louvers regulate the air volume as well as the angle of discharge.

• Designed for ceiling, high side wall, and low side wall installations.

Border Type 3 (Lay-In) Mounted (note)

⅜"

23¾"

15/16"

250, 250-AA



• Optional Model AG-15 opposed blade damper has a screwdriver adjustment accessible through the face of the diff. Mounts on the neck of the diff. • Optional Model AG-20 multilouver damper has an adjusting lever at the face of the diff. Mounted on the diff at the factory. Steel, finished to match the diff. • Diff material is steel in Model 250, aluminum with miscellaneous steel components in Model 250AA.

Duct Size minus ¾"

13/16"

23¾"

Note: Maxiumum duct size is 36 x 36 inches for Border Type 1.

F216

Duct Size plus 1¾"

¼"

Border Type 3 - Standard Duct Sizes

1¼"

9/16"

1"


Duct Size minus ¾"

1¼"

Duct Size plus 1¾"

250, 250-AA

Border Type 1 (Surface Mount) (note)

• • • • • • • • • •

6x6 8x8 9x9 10 x 10 12 x 12 14 x 14 15 x 15 16 x 16 18 x 18 21 x 21

Diffs

Optional Discharge Patterns 2-Way

2-Way Corner

L1

L1

L2

L1 L2

L2C

L2 L2C L3

L2C L3 L4

S1

S1

S2

S1 S2

S2C

S2 S2C S3

S2C S3 S4

Note: For square diffs (height = width), specify L1, L2, L2C, L3, L4, S1, S2, S2C, S3 or S4.

4-Way

3-Way

Patterns are shown looking at the diff face.

L2 L2C

L2C L3

L3 L4

L4

S2 S2C

S2C S3

S3 S4

S4

• Models 250 and 250-AA diffs can be ordered in any of the discharge patterns shown in the diagrams at the right.

• Because the louvers are individually adjustable, each direction of discharge can have its own volume and angle of discharge, all from one diff.


1-Way

L3 L4

S3 S4

F

• The preceeding performance tables show values for the various discharge patterns.

OPTIONAL DISCHARGE PATTERNS F217

Diffs

F

250, 250-AA - ADJUSTABLE, 1-, 2-, 3- OR 4-WAY DISCHARGE PATTERN NC-20 Core Nominal Area Duct Size Sq. Feet Inches 0.12

0.16

0.20

0.26

0.30

0.35

0.40

PERFORMANCE DATA

0.45

F218

6x4

8x4

10 x 4 6x6

12 x 4 8x6

14 x 4

16 x 4 10 x 6 8x8

18 x 4 12 x 6

20 x 4 14 x 6 10 x 8

Core Velocity 100 200 Velocity Pressure 0.001 0.002 Total Pressure 0.003 0.014 Throw, Feet

Throw, Feet

Throw, Feet

Throw, Feet

Throw, Feet

Throw, Feet

Throw, Feet

Throw, Feet

0.55

24 x 4 16 x 6 12 x 8

Throw, Feet

0.62

18 x 6 10 x 10

Throw, Feet

cfm NC 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way

300

10

25

0.006 0.031 35

15

30

50

40

7-6-9 4-6-10 5-7-11 5-8-13 60

20

25

50

30

3-4-7 3-4-7 3-5-8 4-5-6 60

35

3-4-7 3-5-8 3-5-8 4-5-6 70

40

3-4-7 3-5-8 4-6-9 4-5-6 80

45

3-5-8 3-5-8 4-6-9 5-6-7 90

55

3-5-8 3-5-8 4-6-9 5-7-11 110

2-3-4 3-5-8 2-3-5 4-6-9 2-3-5 4-6-10 2-4-6 5-7-12 60 125 2-3-4 4-6-9 2-3-5 4-6-9 2-3-5 4-6-10 2-3-6 5-7-12

4-6-9 4-6-10 5-7-11 6-9-14 80 10 4-5-6 5-6-7 5-6-8 6-8-11 90 10 4-5-6 5-6-7 5-7-9 6-8-11 105 11 5-7-11 5-7-12 5-8-13 7-9-12 120 12 5-6-7 5-6-8 6-8-10 7-9-12 135 12 5-6-8 5-7-9 6-8-10 7-11-17 165 13 5-7-12 5-8-13 6-9-15 8-11-18 185 13 5-8-13 6-9-14 6-9-15 8-11-18

400

0.010 0.056 50 14 5-8-13 7-10-16 65 15 5-7-12 5-8-13 6-9-14 7-11-17 80 16 5-8-13 6-9-14 6-9-15 8-11-18 105 17 6-9-14 6-9-15 7-9-12 8-11-15 120 18 6-8-10 6-9-15 7-10-13 8-11-16 140 18 6-9-15 6-9-15 7-10-13 9-12-17 160 19 6-8-11 7-9-12 8-10-14 9-13-18 180 19 6-9-15 7-11-17 8-12-19 9-14-22 220 20 7-10-16 8-11-18 8-12-20 10-13-19 250 21 7-11-17 8-11-18 8-12-20 10-14-20

500

0.016 0.090 60 20 7-9-12 8-11-15 80 21 6-9-14 6-9-15 7-11-17 9-13-21 100 22 6-9-15 7-10-16 8-11-18 9-14-22 130 23 7-10-16 8-11-18 8-12-20 10-14-20 150 23 7-10-13 8-11-15 9-12-17 10-15-21 175 24 8-11-18 8-12-19 9-13-21 10-15-21 200 25 8-11-15 8-11-16 9-13-18 11-15-22 225 26 8-12-19 9-13-21 10-13-19 11-16-23 275 26 8-12-20 9-14-22 10-14-20 12-17-25 310 27 9-13-21 9-14-22 10-16-25 12-19-30

NC-30 600

0.022 0.131 70 24 8-12-19 10-13-19 95 26 7-11-17 8-12-19 9-13-21 10-15-21 120 27 8-11-18 8-12-20 9-14-22 11-15-22 155 28 8-12-20 9-13-21 10-14-20 12-17-24 180 28 9-12-17 9-13-18 10-14-20 12-17-25 210 29 9-13-21 10-13-19 10-15-21 12-18-26 240 30 9-13-18 10-14-20 11-15-22 13-19-31 270 30 10-13-19 10-14-20 11-16-23 13-20-32 330 31 10-14-20 11-15-22 12-17-25 14-21-34 370 32 10-15-21 11-16-23 12-17-25 15-22-35

700

0.031 0.175 85 28 9-13-18 11-16-23 110 30 8-12-20 9-14-22 10-14-20 12-17-25 140 31 9-13-21 10-13-19 10-15-21 12-18-26 180 32 10-13-19 10-14-20 11-16-23 13-20-32 210 32 10-14-20 10-15-21 12-17-24 14-21-34 245 33 10-15-21 11-15-22 12-17-25 15-22-35 280 34 11-15-22 11-16-20 12-18-26 15-22-36 315 34 11-15-22 12-17-24 13-19-31 15-23-37 385 35 12-17-24 12-18-26 14-21-33 16-24-39 435 36 12-17-24 13-19-31 14-21-34 17-26-41


800

0.040 0.225 95 32 10-15-21 12-18-26 130 33 9-14-22 10-14-20 11-16-23 13-20-32 160 34 10-14-20 11-15-22 12-17-25 14-21-34 210 35 11-15-22 11-16-23 13-19-31 15-23-37 240 36 11-16-23 12-17-25 13-20-32 16-24-38 280 37 12-17-24 14-19-30 14-21-33 17-25-40 320 37 12-17-25 13-19-31 14-21-34 17-26-41 360 38 12-18-26 13-20-32 15-22-35 18-26-42 440 39 13-19-31 14-21-33 15-23-37 18-27-44 495 39 13-20-32 14-21-34 16-24-38 19-29-46

900

0.051 0.290 110 35 12-17-24 14-21-34 145 36 10-15-21 11-16-23 12-18-26 15-22-36 180 37 11-16-23 12-17-25 13-20-32 16-24-38 235 38 12-17-25 13-19-31 14-21-34 17-26-41 270 39 12-18-26 13-20-32 16-24-38 18-27-43 315 39 13-19-31 14-21-33 15-23-37 18-27-44 360 40 13-20-32 15-22-35 16-24-38 19-29-46 405 41 14-21-33 15-22-36 16-24-39 20-29-47 495 41 15-22-35 16-24-38 17-26-41 21-31-50 560 42 15-22-36 16-24-39 18-27-43 21-32-51

1000

0.062 0.355 120 38 13-19-31 15-23-37 160 39 12-17-24 12-18-26 14-21-33 17-25-40 200 40 12-17-25 13-20-32 15-22-35 18-26-42 260 41 13-20-32 14-21-34 16-24-38 19-28-45 300 42 14-21-33 15-22-35 16-24-39 20-29-47 350 42 14-21-34 15-23-37 17-26-41 20-31-49 400 43 15-22-35 16-24-38 18-26-42 21-32-51 450 44 15-23-37 16-24-39 18-27-44 22-33-53 550 44 16-24-39 17-26-41 19-29-46 23-35-56 620 45 17-25-40 18-27-43 20-29-47 24-36-57

NC-40


PERFORMANCE DATA

Diffs

PERFORMANCE DATA NC-20 Core Nominal Area Duct Size Sq. Feet Inches 0.70

0.81

0.87

1.02

Core Velocity 100 Velocity Pressure 0.001 Total Pressure 0.003

30 x 4 20 x 6 14 x 8 12 x 10

Throw, Feet

36 x 4 24 x 6 16 x 8 14 x 10

Throw, Feet

18 x 8 12 x 12

Throw, Feet

30 x 6 20 x 8 16 x 10 14 x 12

Throw, Feet

1.15

24 x 8 18 x 10 16 x 12

Throw, Feet

1.25

36 x 6 20 x 10 14 x 14

Throw, Feet

1.35

16 x 14 18 x 12

Throw, Feet

1.82

36 x 8 30 x 10 24 x 12 20 x 14 18 x 16

2.10

24 x 14 20 x 16 18 x 18

Throw, Feet

Throw, Feet

Throw, Feet

70 2-3-5 2-3-5 2-4-6 3-4-7 80

4-6-9 4-6-9 5-7-11 5-8-13 160

2-3-5 2-3-5 2-4-6 3-4-7 85

4-6-9 4-6-10 5-7-11 5-8-13 175

2-3-5 2-3-5 2-4-6 3-4-7 100

4-6-9 4-6-10 5-7-11 6-9-14 205

2-3-5 2-4-6 2-4-6 3-4-7 115

4-6-10 4-6-10 5-7-12 6-9-14 230

2-3-5 2-4-6 2-4-6 3-5-8 125

4-6-10 5-7-11 5-7-12 6-9-15 250

2-3-5 2-4-6 2-4-6 3-5-8 135

4-5-6 5-6-7 5-6-8 6-8-11 270

2-4-6 2-4-6 3-4-7 3-5-8 155

4-5-6 5-6-7 5-7-9 6-8-11 305

2-4-6 2-4-6 3-4-7 3-5-8 182

5-6-7 5-6-8 5-7-9 7-9-12 365

2-4-6 2-4-6 3-4-7 3-5-8 210

5-6-7 5-6-8 6-8-10 7-9-12 420

2-4-6 5-6-8 3-4-7 5-7-9 3-4-7 6-8-10 4-6-9 7-10-13

300

0.006 0.031 210 14 5-8-13 6-9-14 7-10-16 8-12-19 245 15 6-9-14 6-9-15 7-10-16 8-12-20 260 15 6-9-14 6-9-15 7-11-17 8-12-20 305 16 6-9-15 7-10-16 7-11-17 9-13-21 345 16 6-9-15 7-10-16 8-11-18 9-14-22 375 16 6-8-11 7-9-12 8-10-14 9-13-18 405 17 7-10-16 7-11-17 8-12-19 10-13-19 460 17 7-10-16 7-11-17 8-12-19 10-13-19 545 18 7-11-17 8-11-18 8-12-20 10-14-20 630 19 8-11-18 8-12-19 9-13-21 10-15-21

400

0.010 0.056 280 21 7-11-17 8-12-19 9-13-21 10-15-21 325 22 8-11-18 8-12-20 9-14-22 11-15-22 350 22 8-12-19 8-12-20 9-14-22 11-15-22 410 23 8-12-19 9-13-21 10-13-19 11-17-27 460 24 8 -12-20 9 -13-21 10-13-19 12-17-24 500 24 8-12-20 9-14-22 10-14-20 12-17-25 540 24 9-13-21 9-14-22 10-15-21 12-17-25 610 25 9-13-21 10-13-19 10-15-21 12-18-26 730 26 9-14-22 10-14-20 11-16-23 13-20-32 840 26 10-13-19 10-15-21 12-17-24 14-21-33

500

0.016 0.090 350 27 9-13-21 10-13-19 10-15-21 12-19-30 405 28 9-14-22 11-15-22 11-15-22 13-20-32 435 28 10-13-19 10-15-21 11-16-23 13-20-32 510 29 10-14-20 10 -16-25 12-17-24 14-21-34 575 30 10-15-21 11-15-22 12-17-25 15-22-35 625 30 10-15-21 11-16-23 12-18-26 15-22-35 675 30 10-15-21 11-16-23 12-18-26 15-22-36 765 31 11-15-22 12-17-24 13-20-32 15-23-37 910 32 11-16-23 12-17-25 14-21-33 16-24-39 1050 32 12-17-24 12-18-26 14-21-34 17-25-40

NC-40 600

0.022 0.131 420 32 10-15-21 11-16-23 12-18-26 15-22-36 485 33 11-15-22 12-17-24 13-19-31 16-24-38 520 33 11-16-23 12-17-25 13-20-32 16-24-39 610 34 12-17-24 12-18-26 14-21-33 17-25-40 690 34 12-17-25 13-19-31 14-21-34 17-26-41 750 35 12-17-25 13-20-32 15-22-35 18-26-42 810 35 12-18-26 13-20-32 15-22-36 18-27-43 920 36 13-19-31 14-21-33 15-23-37 18-27-44 1090 36 13-20-32 15-22-35 16-24-39 19-29-46 1260 37 14-21-34 15-22-36 17-25-40 20-30-48


700

0.031 0.175 490 36 12-17-25 13-20-32 15-22-35 18-26-42 565 37 12-18-26 14-21-33 15-22-36 18-27-44 610 37 13-19-31 14-21-33 15-23-37 19-28-45 715 38 13- 20-32 15-22-35 16-24-39 19-29-46 805 38 14-21-33 15-22-36 17-25-40 20-29-47 875 39 14-21-34 15-23-37 17-26-41 20-30-48 945 39 15-22-35 15-23-37 18-26-42 21-31-50 1070 40 15-22-36 16-24-39 18-27-43 21-32-51 1270 40 15-23-37 17-25-40 19-28-45 22-34-54 1470 41 16-24-39 18-26-42 19-29-46 23-34-55

800

900

1000

0.040 0.051 0.062 0.225 0.290 0.355 560 630 700 40 42 45 14-21-33 15-23-37 17-26-41 15-22-36 17-25-40 18-27-44 17-25-40 18-27-44 20-31-49 20-29-47 22- 33-53 25-37-59 650 730 810 40 43 46 14-21-34 16-24-38 18-27-43 15-23-37 17-26-41 19-29-46 17-26-41 19-29-46 21-32-51 20-31-49 23-34-55 26-39-62 695 785 870 40 43 46 15-22-35 16-24-39 18-27-43 16-24-38 18-26-42 20-29-47 18-26-42 20-29-47 22-32-52 21-31-50 23-35-56 26-39-63 920 1020 815 41 44 47 15- 22-36 17-26-41 19-28-45 16-24-39 18-27-44 20-30-48 18-27-43 20-31-49 23-34-55 22-32-52 25-37-59 27-41-65 920 1040 1150 42 45 48 16-24-38 18-26-42 19-29-46 17-26-41 19-28-45 21-31-50 19-28-45 21-31-50 23-35-56 22-34-54 25-37-60 28-42-68 1000 1120 1250 42 45 48 16 -24-38 18-27-43 20-29-47 17-26-41 19-29-46 21-32-51 19-29-46 21-32-51 24-36-57 23-34-55 26-39-62 29-43-69 1080 1220 1350 42 45 48 16-24-39 18-27-434 20-30-48 18-26-42 20-29-47 22-32-52 20-29-47 22-33-53 25-37-59 23-35-56 26-39-63 29-44-70 1220 1380 1530 43 46 49 17-25-40 19-28-45 21-31-50 18-27-44 20-31-49 22-34-54 20-30-48 23-34-55 25-37-60 24-36-58 27-41-65 30-46-73 1460 1640 1820 44 47 50 18-26-42 20-29-47 22-33-53 19-28-45 21-32-51 24-36-57 21-31-50 24-36-57 26-39-63 25-37-60 29-42-68 32-48-76 1680 1890 2100 44 47 50 18-27-44 20-31-49 23-34-55 20-29-47 22-33-53 25-37-59 22-32-52 25-37-59 28-41-66 26-39-62 29-44-70 33-50-80

F

PERFORMANCE DATA

1.53

30 x 8 24 x 10 20 x 12 18 x 14 16 x 16

cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way

200

0.002 0.014 140

NC-30


250, 250-AA - ADJUSTABLE, 1-, 2-, 3- OR 4-WAY DISCHARGE PATTERN

F219

Diffs

PERFORMANCE DATA

F

F220

250, 250-AA - ADJUSTABLE, 1-, 2-, 3- OR 4-WAY DISCHARGE PATTERN NC-20 Core Area Sq. Feet 2.35

2.68

Nominal Duct Size Inches

Core Velocity 100 Velocity Pressure 0.001 Total Pressure 0.003

36 30 24 20

x x x x

10 12 16 18

Throw, Feet

36 30 24 20

x x x x

12 14 18 20

Throw, Feet

3.15

36 x 14 30 x 16 24 x 20

Throw, Feet

3.65

36 x 16 30 x 18 24 x 24

Throw, Feet

4.05

36 x 18 30 x 20

Throw, Feet

4.72

36 x 20 30 x 24

Throw, Feet

5.82

36 x 24 30 x 30

Throw, Feet

7.17

36 x 30

Throw, Feet

8.63

36 x 36

Throw, Feet

cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way

235

200

0.002 0.014 470

2-4-6 5-6-8 3-4-7 5-7-9 3-5-8 6-8-11 4-6-9 7-10-13 270 535 3-4-7 5-7-9 3-4-7 6-8-10 3-5-8 6-8-11 4-6-9 8-10-14 315 630 10 3-4-7 5-7-9 3-4-7 6-8-10 3-5-8 7-9-12 4-5-6 8-11-15 365 730 11 3-4-7 6-9-14 3-5-8 6-9-15 3-5-8 7-9-12 4-5-6 8-11-16 405 810 11 3-4-7 6-9-14 3-5-8 6-9-15 4-6-9 7-10-13 4-5-6 8-11-16 470 945 12 3-5-8 6-9-15 3-5-8 7-9-12 4-6-9 7-10-13 5-6-7 9-12-17 580 1160 13 3-5-8 6-9-15 4-6-9 7-9-12 4-6-9 8-10-14 5-6-7 9-13-18 715 1430 14 3-5-8 7-9-12 4-6-9 7-10-13 4-5-6 8-11-16 5-6-8 10-13-19 865 1730 14 4-6-9 7-10-13 4-5-6 8-10-14 4-5-6 8-11-16 5-7-9 10-14-20

300

0.006 0.031 705 19 8-11-18 8-12-20 9-14 -22 11-15-22 805 20 8-12-19 8-12-20 9-14-22 11-16-23 945 20 8-12-19 9-13-21 10-14-20 12-17-24 1100 21 8-12-20 9-14-22 10-14-20 12-17-25 1220 22 9-13-21 9-14-22 10-15-21 12-18-26 1420 22 9-14-22 10-13-19 11-15-22 13-19-31 1750 23 10-13-19 10-15-21 11-16-23 13-20-32 2150 24 10-14-20 11-15-22 12-17-25 14-21-34 2590 25 10-15-21 11-16-23 12-18-26 15-22-36

• All pressures are in inches of water. • Throw values given are for terminal velocities of 150, 100 and 50 fpm along a surface. The throw may be increased or decreased as much as 20% by changing the louver setting. • NC values based on a room absorption of 10 dB, re 10-12 watts. • Blank areas denote NC values less than 10 and cfm values less than 50. • Black dividing lines denote ranges of NC values. • Performance data is based on an approximate ⅛-inch opening between the border and the adjacent louver, with progressively wider spacings

NC-30 400

0.010 0.056 940 27 10-14-20 10-15-21 12-17-24 14-21-33 1070 27 10-15-21 11-15-22 12-17-25 15-22-35 1260 28 11-15-22 11-16-23 12-18-26 15-22-36 1460 29 11-16-23 12-17-24 13-20-32 15-23-37 1620 29 11-16-23 12-17-25 13-20-32 16-24-39 1890 30 12-17-24 12-18-26 14-21-34 17-25-40 2330 31 12-18-26 13-20-32 15-22-35 18-26-42 2870 31 13-20-32 14-21-34 15-23-37 18-27-44 3450 32 14-21-33 15-22-35 16-24-39 19-29-46

500

0.016 0.090 1180 33 12-17-25 13-19-31 15-22-35 18-26-42 1340 33 12-18-26 14-21-33 15-22-36 18-27-43 1580 34 13-19-31 14-21-34 16-24-38 19-28-45 1820 35 14-21-33 15-22-35 16 -24-39 19-29-46 2020 35 14-21-34 15-22-36 17-25-40 20-29-47 2360 36 15-22-35 16-24-38 18-26-42 20-31-49 2910 37 15-23-37 17-25-40 18-27-44 22-32-52 3580 37 16-24-39 18-26-42 19-29-46 23-34-55 4320 38 17-26-41 18-27-44 20-30-48 24-36-58

NC-40 600

0.022 0.131 1410 37 15-22-35 15-23-37 18-26-42 20-31-49 1610 38 15-22-36 16-24-39 20-30-48 21-32-51 1890 39 15-23-37 17-25-40 19-28-45 22-33-53 2190 39 16 -24-39 18-26-42 19-29-46 23-34-55 2430 40 17-25-40 18-27-43 20-29-47 24-36-57 2830 40 18-26-42 19-28-45 20-31-49 25-37-59 3490 41 18-27-44 20-29-47 22-32-52 26-39-62 4300 42 19-29-46 21-31-50 23-34-55 28-41-66 5180 43 20-31-49 22-35-52 24-36-58 29-44-70

700

0.031 0.175 1640 41 17-25-40 18-27-43 20-30-48 24-36-57 1880 42 18-26-42 19-28-45 20-31-49 25-37-59 2200 43 18-27-43 19-29-46 21-32-51 26-39-62 2560 43 19-28-45 20-30-48 22-34-54 27-40-64 2830 44 19-29-46 20-31-49 23-34-55 28-41-66 3300 44 20-30-48 22-32-52 24-36-57 28-42-68 4070 45 21-32-51 23-34-55 25-37-60 30-45-72 5020 46 22-34-54 24-36-57 27-40-64 32-48-77 6040 47 23-35-56 25-37-60 28-42-67 33-50-80

800

0.040 0.225 1880 45 19-28 -45 20-31-49 22-34-54 27-40-64 2140 45 20-29-47 21-31-50 23-35-56 28-41-66 2520 46 20-31-49 22-32-52 24-36-58 29-43-69 2920 47 21-31-50 23-34-55 25-37-60 30-45-72 3240 47 22-32-52 23-35-56 26-39-62 31-46-74 3780 48 22-34-54 24-36-58 27-40-64 32-49-78 4660 49 24-36-57 25-38-61 28-42-68 34-51-82 5740 50 25-37-60 27-41-65 30-45-72 36-54-87 6900 51 27-40-64 27-42-68 32-48-76 38-57-91

900

0.051 0.290 2120 48 21-31-50 23-34-55 25-38-61 30-45-72 2410 48 22-32 -52 24-36-57 26-39-62 31-47-75 2840 49 23-34-55 25-37-59 27-41-65 33-49-79 3280 50 24-36-57 25-38-61 28-42-68 34-51-82 3640 50 25-37-59 26-39-63 29-44-70 35-52-84 4250 51 25-38-61 28-41-66 30-46-73 37-55-88 5240 52 27-40-64 29-44-70 32-48-77 39-58-93 6450 53 28-42-68 30-46-73 34-51-82 41-61-98 7700 53 30-44-71 32-48-77 36-54-86 43-64-103

1000

0.062 0.355 2350 51 24-36-57 25-37-60 28-42-68 34-51-82 2680 51 25-37-59 26-39-63 29-44-70 35-53-85 3150 52 26-39-62 28-41-66 30-46-73 37-56-89 3650 53 27-40-64 28-42-68 32-48-76 38-57-92 4050 53 28-41-66 29-44-70 33-49-79 39-59-94 4720 54 28-42-68 31-46-74 34-51-82 41-61-98 5820 55 30-45-72 32-49-78 36-54-87 44-66-105 7170 56 32-48-76 34-51-82 38-57-92 46-69-110 8630 56 33-50-80 36-54-87 40-60-96 48-72-116

NC-50


PERFORMANCE DATA

between louvers further away from the border. This setting discharges air parallel to the diffs face (horizontal discharge, if installed in a ceiling). • See the section, Engineering Guidelines for additional throw information. • If all the louvers are adjusted to the full open position, the listed NC values will be reduced by 7, the total pressure will be 0.30 times those shown in the tables and the throw will be a vertical free jet. • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines additional information.

Diffs



ADJUSTABLE, 1-, 2-, 3-, AND 4-WAY DISCHARGE PATTERNS Available Steel Model: 250 Available Aluminum Model: 250-AA Ceiling and side wall diffs shall be Titus Model 250 (steel) or 250-AA (aluminum with miscellaneous steel components) of the sizes and mounting types shown on the plans and outlet schedule. Diff shall have curved deflectors, which are individually adjustable from the face of diff to regulate air volume and angle of discharge. Diffs shall be built in one-, two-, three- or four-Way discharge patterns. The diffs shall be constructed of 20-gauge steel or 0.051 aluminum with miscellaneous steel components, depending on the model selected.

Optional opposed blade damper shall be constructed of heavy gauge steel and shall be installed on the neck of the diff. Damper must be operable from the face of the diff by placing a standard screwdriver between the curved deflectors. The manufacturer shall provide published performance data for the ceiling/side wall diff. The diff shall be tested in accordance with ANSI/ASHRAE Standard 70-2006.


Height White

Multi-Use, 1-, 2-, 3-, or 4-Way Pattern

250

X

Aluminum

X

Width

Finish 26 01

1

Optional Damper AG-15 AG-20

X

XX-XX

A N Fastening

Screw Holes No Screw Holes

Border

Multi-Use, 1-, 2-, 3- or 4-Way Pattern

XX x XX

Width x Height

6 8 9 10 12 14 15 16 18 21

x x x x x x x x x x

6 8 9 10 12 14 15 16 18 21

24 x 24

White Aluminum

3 Lay-In

Border

Finish 26 1 XX

XX-XX

AG-15 AG-20 Optional Damper

Opposed Blade Multi-Louver

XXX L1, S1, L2, S2, L2C, S2C, L3, S3, L4, S4 Patterns

SPECIFICATIONS

250

Module Size


Note: See page F216 for width and height available sizes.

Model

F


XX

Surface Mount



F221

Diffs


SUGGESTED SPECIFICATIONS Model

Height

250-AA

SPECIFICATIONS F222

Aluminum

X

Width

1

Optional Damper AG-15 AG-20


XX

X

XX-XX

A N Fastening

Screw Holes No Screw Holes

Surface Mount

Border

Model Aluminum, Multi-Use, 1-, 2-, 3- or 4-Way Pattern

Width x Height

XX x XX 6 8 9 10 12 14 15 16 18 21

x x x x x x x x x x

6 8 9 10 12 14 15 16 18 21

Module Size 24 x 24

White Aluminum

3 Lay-In

Border

Finish 26 1 XX

XX-XX

AG-15 AG-20 Optional Damper



Note: See page F216 for width and height available sizes.

250-AA

F

X

Finish 26 01

White

Aluminum, Multi-Use, 1-, 2-, 3-, or 4-Way Pattern


Diffs

TurboF

Available Model: TBF-AA

• Aluminum

Products Include: • Standard Finish - #26 White.

TBF-AA

• An aesthetic alternative to conventional air distribution providing a contemporary look for sports complexes, atriums and lobbies.

-MOUNTED NOZZLES

• Material is heavy-duty aluminum.

• Titus TurboF series TBF-AA diff provides precise control of high capacity jets. • The TurboF is a versatile diff for demanding spot cooling and heating HVAC applications, such as industrial or large open areas.

• Deep deflection rings in each nozzle for maintaining directional control at high velocities up to 30 degrees in any direction.

• Each ring of the nozzle assembly is 1-piece spun construction.

• Nozzle sizes are 6, 8, 10, 12 and 14 inches, with up to four nozzles per .


TBF-AA

F

Nozzle Size NOM Duct (inches) Height 6 10 8 12 10 14 12 16 14 18

Width by Number of Nozzles 1 2 3 4 10 19 28 37 12 23 34 45 14 27 40 53 16 31 46 61 18 35 52 69

Typical Installation

TBF-AA

STRAIGHT DUCT


F223

Diffs


PERFORMANCE DATA

F

TBF-AA - -MOUNTED NOZZLES

Size 6 1 Nozzle

Size 6 2 Nozzle

Size 6 3 Nozzle

Size 6 4 Nozzle

Size 8 1 Nozzle

Size 8 2 Nozzle

Size 8 3 Nozzle

Size 8 4 Nozzle

Size 10 1 Nozzle

PERFORMANCE DATA

Size 10 2 Nozzle

F224

Size 10 3 Nozzle

Size 10 4 Nozzle

Duct Velocity, fpm Velocity Pressure, IN WG Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT

200 0.002 135 0.076 12-15-20 259 0.070 17-20-29 382 0.070 21-25-35 506 0.070 23-29-40 196 0.056 15-17-25 377 0.053 21-24-34 559 0.052 26-30-42 740 0.052 29-34-48 267 0.037 16-20-29 518 0.035 23-28-40 768 0.032 28-34-50 1019 0.031 32-39-56

300 0.006 203 0.171 13 14-17-25 388 0.158 18 20-24-35 573 0.157 20 25-30-44 759 0.157 23 28-34-49 294 0.127 15 17-21-30 566 0.118 16 24-30-42 838 0.116 18 30-37-52 1110 0.116 18 34-42-59 401 0.084 20-25-35 777 0.079 14 28-35-50 1153 0.071 16 34-43-61 1528 0.071 18 39-49-69

400 0.010 271 0.303 24 17-20-29 518 0.281 29 23-29-41 765 0.278 30 29-35-51 1012 0.278 33 33-40-57 392 0.226 19 20-25-34 755 0.210 25 28-34-48 1117 0.206 29 35-42-59 1480 0.207 29 39-48-67 535 0.149 20 24-29-41 1036 0.140 25 33-40-57 1537 0.127 27 41-50-70 2038 0.125 29 46-56-80

500 0.016 339 0.474 32 19-23-33 647 0.440 36 26-32-46 956 0.435 39 33-40-57 1264 0.435 41 37-45-64 490 0.353 27 22-27-40 943 0.328 34 31-38-55 1397 0.322 36 38-48-68 1850 0.323 37 43-54-78 668 0.232 28 26-32-46 1295 0.219 33 37-44-64 1921 0.198 34 45-55-79 2547 0.196 37 51-62-90

600 0.022 406 0.683 38 21-25-36 777 0.633 43 29-35-51 1147 0.626 43 36-44-63 1517 0.626 48 41-49-71 588 0.508 34 25-30-43 1132 0.473 40 34-42-60 1676 0.464 42 42-52-75 2220 0.465 43 48-59-85 802 0.334 34 29-35-50 1554 0.315 35 40-50-70 2305 0.285 42 50-61-87 3057 0.282 43 56-69-98

For Performance Notes, please refer to end of table.

700 0.031 474 0.929 44 22-27-39 906 0.862 49 31-28-55 1338 0.853 51 38-47-67 1770 0.853 53 43-54-76 685 0.691 39 27-32-47 1320 0.644 46 37-45-66 1955 0.631 49 46-56-82 2590 0.633 50 52-64-93 936 0.455 41 31-38-55 1813 0.429 45 43-54-76 2689 0.388 47 54-66-95 3566 0.384 48 61-75-107

800 0.040 542 1.214 50 24-29-43 1036 1.125 54 34-41-60 1529 1.114 56 42-51-74 2023 1.114 58 48-57-83 783 0.903 45 29-34-51 1509 0.841 50 40-48-71 2235 0.824 53 50-59-88 2961 0.827 54 56-67-100 1070 0.594 45 33-41-59 2072 0.560 52 47-57-83 3074 0.506 53 57-70-102 4076 0.501 54 65-80-116

Diffs

PERFORMANCE DATA

Size 12 1 Nozzle

Size 12 2 Nozzle

Size 12 3 Nozzle

Size 12 4 Nozzle

Size 14 1 Nozzle

Size 14 2 Nozzle

Size 14 3 Nozzle

Size 14 4 Nozzle

Duct Velocity, fpm Velocity Pressure, IN WG Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT

200 0.002 350 0.033 19-23-33 681 0.031 26-32-46 1011 0.031 32-40-57 1324 0.031 36-45-64 444 0.024 21-26-37 866 0.023 30-36-51 1288 0.023 37-35-63 1710 0.023 42-51-72

• Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts. • Dash (-) in space denotes an NC value of less than 10. • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines for additional information.

F

PERFORMANCE DATA

• All pressures given are in inches of water. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for additional throw information. • The throw values listed are with ceiling effect. • To obtain static pressure, subtract the velocity pressure from the total pressure. • If the diff is mounted on an exposed duct, the throw values are 70% of those listed in the table and will project downward.

300 400 500 600 700 800 0.006 0.010 0.016 0.022 0.031 0.040 525 700 875 1050 1225 1400 0.075 0.132 0.207 0.298 0.406 0.530 18 27 33 39 47 23-28-40 27-33-47 30-36-52 33-40-58 35-43-62 38-47-67 1021 1362 1702 2042 2383 2723 0.071 0.126 0.197 0.283 0.385 0.503 16 27 35 42 47 53 32-40-56 37-46-66 42-51-73 46-56-81 50-61-87 53-66-94 1517 2023 2529 3034 3540 4046 0.070 0.124 0.193 0.278 0.379 0.495 16 27 34 41 46 52 40-49-69 46-57-81 52-63-90 57-69-100 61-75-107 66-81-116 2013 2684 3356 4027 4698 5369 0.069 0.123 0.192 0.276 0.375 0.490 16 27 35 43 49 53 45-56-78 52-64-92 59-71-102 64-78-113 69-85-122 75-92-132 666 888 1109 1331 1553 1775 0.055 0.097 0.125 0.219 0.299 0.390 18 27 33 39 44 26-32-45 29-37-53 34-41-59 37-45-65 40-49-70 43-53-75 1299 1732 2165 2597 3030 3463 0.052 0.093 0.146 0.210 0.286 0.373 12 23 30 37 43 47 36-45-64 41-51-74 47-58-83 51-64-91 56-69-98 60-74-106 1932 2576 3220 3864 4508 5151 0.052 0.092 0.144 0.207 0.281 0.368 15 25 34 40 46 52 45-55-79 50-63-91 58-72-102 63-79-113 70-85-122 74-91-131 2565 3420 4275 5130 5985 6840 0.051 0.091 0.142 0.205 0.279 0.365 16 26 36 41 47 53 51-63-89 57-72-103 66-81-116 72-89-128 79-96-138 84-103-148


TBF-AA - -MOUNTED NOZZLES

F225

Diffs


SUGGESTED SPECIFICATIONS TURBOF

maintain numerous deflection settings for rated airflows up to 30° in any direction.

-MOUNTED NOZZLES Available Aluminum Model: TBF-AA Turbof mounted nozzle diffs shall be Titus model TBF-AA (aluminum) for the sizes and mounting types as shown on the plans and outlet schedule. Diff shall be of heavy duty construction with one, two, three or four nozzles. Each ring in the nozzle assembly shall be of 1-piece spun construction. Rings that are rolled and welded are not acceptable. The TBF-AA model will be constructed aluminum nozzles and . Each nozzle shall have concentric deep deflection individually adjustable rings. Heavy duty pivot bars will

SPECIFICATIONS

F

F226

MODEL NUMBER SPECIFICATION Nozzle Size 6 8 Model 10 12 TBF-AA Aluminum 14 XXX-XX

X

Number of Nozzles

1 2 3 4

XX White

XX 26 Finish

The finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315°F for 30 minutes. The pencil hardness must be HB to h. The paint must a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must a 250-hour ASTM D870 Water Immersion Test. The paint must also the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. The manufacturer shall provide published performance data for the diff. The diff shall be Tested in accordance with ANSI/ASHRAE Standard 70-2006.

Diffs

Concentric Suppy/Return Diffs • The CSR and CSR-P are compatible with unitary package equipment from 2½ to 25 tons.

Available Models: CSR CSR-P

• The CSR-P shown in the figure is ideal for applications requiring a system that provides equal distribution on all four sides while maintaining low noise levels. It may be installed in a T-bar ceiling or plaster ceiling, or duct mounted in an open area.

• Without Plenum • With Plenum

• The Titus CSR Series is designed to maximize the performance of a combine supply/return diff. • Supply and return air is handled through one air device.

• Features and benefits of the CSR and CSR-P diffs include:

CSR, CSR-P

COMBINATION SUPPLY/ RETURN - HIGH CAPACITY

• Four-way horizontal airflow. • Low noise, low pressure

performance. • Anti-smudging characteristics. • Aluminum diff and

return air eggcrate.


CSR, CSR-P

• Lightweight design. • Built-in hanging for

easy installation.

Module Size ¼ S R

2½ - 5 6 - 10 10 - 15 15 - 25

48 48 48 60

x x x x

24 36 48 60

46¾ 46¾ 46¾ 58¾

x x x x

22¾ 34¾ 46¾ 58¾

Return Duct R 36⅛” 3211/16 29⅛” 3711/16

x x x x

12⅛” 2011/16 29⅛” 3711/16 All dimensions are in inches.

• Large commercial buildings, warehouses, and retail stores will find the CSR-P the prime selection for single point air distribution systems. Titus provides the entire plenum and diff in one piece. The assembled CSR-P unit makes for an easy, low cost installation.

F

CSR, CSR-P

Nominal Module Supply Duct Tonage Size S

1¾

F227

Diffs


DIMENSIONS

F G

F

D

E

115/16"

E

Hangar Brackets

C

A

Module Size

A

48 x 24

47

F

B

B

C

22 /16 23 13

15

/16

D

E

F

22½

12¼

G

11½ 1715/16

G

H

G

115/16"

Hanger Brackets F

D

E

F

E

C

B

DIMENSIONS

A

F228

Module Size

A

B

C

48 x 36

47

35

23

48 x 48

47

47

23

60 x 60

59

59

D

F

G

H

4 /16 17⅞”

3⅛”

3 /16

27⅞”

4 /16 17⅞”

3⅛”

5 /16

35⅞”

2315/16 415/16 23⅞”

3⅛”

59/16

47⅞”

15

/16

15

/16

E

15

15

9

9

Diffs

PERFORMANCE DATA

48 x 24 inches 48 x 36 Inches 48 x48 Inches 60 x 60 Inches

Airflow, cfm Total System Static Pressure (Inches WC) Supply Static Pressure (Inches WC) Return Static Pressure (Inches WC) NC (Noise Criterion) Throw, Feet Airflow, cfm Total System Static Pressure (Inches WC) Supply Static Pressure (Inches WC) Return Static Pressure (Inches WC) NC (Noise Criterion) Throw, Feet Airflow, cfm Total System Static Pressure (Inches WC) Supply Static Pressure (Inches WC) Return Static Pressure (Inches WC) NC (Noise Criterion) Throw, Feet Airflow, cfm Total System Static Pressure (Inches WC) Supply Static Pressure (Inches WC) Return Static Pressure (Inches WC) NC (Noise Criterion) Throw, Feet

Note: Data for 48x24 inches and 48x36 inches is for long side only. For short side performance, multiply by .7.

1000

1500

2000

2500

0.13

0.29

0.51

0.79

0.05

0.12

0.21

0.33

-0.08

-0.17

-0.30

-0.47

14 10-14-20

24 14-18-25

1500

2000

2500

3000

3500

4000

4500

5000

0.07

0.13

0.20

0.29

0.40

0.52

0.65

0.81

0.04

0.08

0.12

0.17

0.23

0.30

0.38

0.47

-0.03

-0.05

-0.09

-0.12

-0.17

-0.22

-0.28

-0.34

19 12-18-25

25 16-20-29

2000

2500

3000

3500

4000

4500

5000

5500

6000

0.08

0.12

0.17

0.23

0.30

0.38

0.47

0.57

0.68

0.04

0.06

0.08

0.11

0.15

0.19

0.23

0.28

0.33

-0.04

-0.06

-0.09

-0.12

-0.15

-0.19

-0.24

-0.29

-0.34

17 13-20-29

23 17-23-32

3000

4000

5000

6000

7000

8000

9000

10000

0.07

0.12

0.19

0.28

0.38

0.49

0.63

0.77

0.04

0.08

0.12

0.17

0.24

0.31

0.39

0.48

-0.03

-0.05

-0.07

-0.11

-0.14

-0.19

-0.24

-0.29

22 16-25-35

31 22-29-41

30 34 37 40 43 45 19-23-32 20-25-35 22-27-38 23-29-41 25-31-43 26-32-46

F

28 32 35 38 41 44 46 20-25-35 22-27-38 23-29-41 25-31-43 26-32-46 28-34-48 29-35-50

38 43 48 52 55 59 26-32-46 29-35-50 31-38-54 33-41-54 35-43-61 37-46-64

PERFORMANCE DATA

• NC based on a room, 68 x 80 x 14 feet with the receiver located 9 feet from the diff. • Total System Static Pressure is the sum of the supply static pressure and the return static pressure. • Throw is listed as the distance in feet to terminal velocities of 150, 100 and 50 fpm under isothermal conditions.

31 36 17-20-29 19-23-32


CSR-P - COMBINATION SUPPLY/RETURN

F229



SPECIFICATIONS

F

F230

CONCENTRIC SUPPLY/RETURN DIFFS COMBINATION SUPPLY/RETURN - HIGH CAPACITY Available Models: CSR CSR-P

• Without Plenum • With Plenum

Furnish and install Titus Model CSR-P concentric Supply/ Return Diffs of the sizes and capacities shown in the plans. Specified roof top A.C. units will utilize a concentric supply/ return diff assembly complete with fixed blade extruded concentric diff and plenum. The diffs shall be compatible with 2½ to 25 ton unitary package equipment as shown in the plans. Assembly shall include peripheral supply and control return with an internal one piece low pressure drop distribution plenum to ensure even, four-way air distribution and low noise. Plenum distribution assembly

Diffs must be internally sealed to prevent short circuiting and all internal walls of the plenum shall be insulated. Internal insulation must comply with UL 181 and NFPA 90A. all exposed insulation edges shall be coated with NFPA approved sealant to prevent erosion. Entire plenum assembly to be ed via hanger brackets. Hanger brackets to be provided by Titus as an integral part of the plenum assembly. The assembly shall be capable of being installed in a T-bar ceiling, plaster ceiling or duct mounted in an open area. No exposed fasteners, wood or sheet metal adapters will be acceptable. Titus shall provide complete performance data including cfm, total system static pressure, supply static pressure, return static pressure, noise criterion and throw for all sizes shown in the plans. Performance shall be certified and tested in accordance with ANSI/ASHRAE Standard 70-2006. complete balancing data shall also be provided for each size shown in the plans.

Air Grilles Diffs 314y2g

Overview 5o1f4z

More details 6z3438

Related Documents c2h70

Air Grilles Diffs 314y2g

Waterloo Grilles 536q3u

Anthologie Des Grilles 5k2z50

Grilles Grand Jeu Bataille Navale 6k1xy

More Documents from "Bader Shrbaji" 3v664k

A Practical Guide To Noise And Vibration Control For Hvac Systems 6l2j6n

Ansi Asme B16.3 3p3a3g

Air Grilles Diffs 314y2g

Normative Theories 4ti4g

Manual Kaspersky Security Center 10 4428k

49928259 Dimensionnement Structures Routes 251336