Aimpoint Catalog 2013 6z6k5n

Hunting Sport Shooting Law Enforcement Military

2013 Red dot sights Aimpoint Inc. 14103 Mariah Court Chantilly, VA 20151, USA Call Toll-free 1-877-246-7646 Phone +1 (703) 263-9795 • Fax +1 (703) 263-9463 E-mail: [email protected] • www.aimpoint.com

Graphic Design: STICKY FINGERS® Malmö, Sweden • Photographers: Stefan Albers, Robbie Barkmann, Bigdomphoto.com, Reed Brown, Joe Byers, Silvio Calibi, CJ Claassens, Foxwood Photography, Robert Glover, Cameron Hopkins, Mitch Kezar, Alex Landeen, Kelly Lasky Photography, Andrew McKean, Tom Opre, Kevin Orton, Eric Poole, Ryan Rowe, Yamil Sued, SureFire and Larry Vickers Printing House: Exaktaprinting, Malmö, SWEDEN This printed material is for information purposes only and does not constitute any binding obligation or agreement by Aimpoint AB All rights reserved. © 2013 Aimpoint AB. Art. No. M01421

TABLE OF CONTENTS

2013 4 6 7 12 16 18 20 22 26 28 32 38

The President´s Letter Why an Aimpoint Red Dot Sight? Developments & Quality Micro H-1



Hunter H34L

Hunter H30L Hunter H34S Hunter H30S 9000L 9000SC



CompC3 Micro T-1

42 PRO 44 CompM4/M4s 46 CompM3/ML3 50 3XMag 52 CEU 54 MPS3 56 LPI 60 Mounting Solutions 62 Accessories 64 Warranty & Customer Service 66 System of Systems 70 Technical Specifications

The President´s Letter

To Our Valued Customers and Friends:

In 1974, a small group of Swedish entrepreneurs started exploring ways to improve shooting accuracy. Their goal was simple but ambitious; to create a sighting technology that would allow shooters to acquire difficult targets quickly and accurately under any conditions imaginable. Little did they know that the product their idea would eventually evolve into, the Aimpoint electronic reflex sight, would revolutionize the shooting and hunting industry. In basic , Aimpoint’s breakthrough technology allows a shooter to do what comes naturally – shoot while keeping both eyes open while remaining focused on their target. When a shooter looks into an Aimpoint sight, a red dot appears in the lens. When the red dot is on the target, you’re on target, with no centering required. It is this inherent combination of simplicity, speed, and accuracy that makes Aimpoint sights the preferred choice for beginners and experts alike. The U.S. Army was the first military force to recognize the full potential of Aimpoint’s parallax-free, red dot technology. In 1997, the Army awarded Aimpoint its first contract for the supply of electronic sights. Since then, Aimpoint has delivered over 1,000,000 of its soldier-tested, combat proven sights to the U.S. Military. Even following several additional rounds of rigorous competitive testing, Aimpoint remains the only manufacturer type-classified to supply the M68CCO to the U.S. Military to this day.

As a result of Aimpoint’s commitment to innovation, quality, and constant improvement, the company is recognized as the worldwide leader in electronic sighting technology. The products you will find contained on the pages of this catalog are the result of nearly 40 years of undiluted focus on our company’s core competency, and represent the finest products we have ever offered. The Aimpoint Micro sights are the toughest and most dependable compact sights available. The CompM4s is the latest version of the U.S. Army’s M68CCO, and offers up to 8 years of constant-on use from a single AA battery. The new Aimpoint Patrol Rifle Optic has already achieved an enormous response from U.S. Law Enforcement, and the Aimpoint Hunter sight proves that we have never forgotten our company’s roots in hunting and sport shooting. Around the world there are well over 2,000,000 hunters, sports shooting enthusiasts, police and military personnel who use Aimpoint sights, and we thank you for your trust and continued . For those who have yet to use our products, be sure to give us a try and see just how fast and accurately you can shoot without magnification. We will be busy working on the next big advancement in optics technology, and we promise that we will not let you down. Just wait until you see what we do next!

Sincerely

Lennart Ljungfelt President

4

5

Why an Aimpoint Red Dot Sight?

The Aimpoint Philosophy

Why an Aimpoint Red Dot Sight?

When the time comes to shoot, there should be absolutely no question that you can count on your sight to perform. We believe that a weapon sight should simplify aiming while meeting the highest possible requirements for reliability and ruggedness. We know that conditions in the field place extreme demands on your equipment, so we design and test Aimpoint products to stand up to any conditions you are likely to encounter. We also design our products to operate constantly for years on a single battery so your sight will always be ready whenever you need it.

Place the dot on your target - from any angle

Why a Red Dot Sight? To be successful, shooters must be able to aim accurately and quickly under a wide variety of conditions. On a shooting range, there is plenty of time to take aim, but in the real world, everything is in fast motion. Add rough terrain, foul weather, poor light and high levels of stress and even the most experienced marksman will be put to the test.   Red dot sights are superior to iron sights and magnifying scopes in several ways. Using these other types of aiming devices require that the shooter’s focus leaves the target. With iron sights, shooters must align the rear and front sights with the target. Magnified scopes slow you down. Your field of vision is severely limited, and locating your target through a tube with one eye closed wastes valuable time and destroys your situational awareness.   The single red dot has been proven to be the fastest type of reticule to place on target, and provides the greatest increase in hit probability on moving targets. Red dot sights allow you to remain focused on the target. Shooting with both eyes open means that you remain in touch with what is going on around you, and will never again miss an important shot because your scope was on the wrong magnification!

6

Development & Quality

Aimpoint sights are parallax-free, which means that the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. This means you never have to worry about centering the dot inside the sight. When the dot is on target, so are you. You will be able to get on target fast, and can forget about being challenged by bad light or moving targets.

All conditions - Anywhere

Aimpoint sights work in all light conditions from the darkness of the forest before dawn to bright mountain sunlight. They are fully submersible so you never have to worry about rain or immersion. Aimpoint sights are developed and tested to be used in any weather conditions, from the sub-zero temperatures of the Arctic to the heat and humidity of the tropics.

On any type of firearm

Whether you have a rifle, shotgun, handgun, black powder rifle or bow, Aimpoint has a sight for you.

Standard features on all Aimpoint sights • Unlimited field of view • Parallax-free and unlimited eye relief • Unaffected by extreme weather conditions • Extremely rugged, durable construction • No hazardous materials • No laser emission that could be harmful to your eyes • Increased aiming confidence and hit probability • Reduced training time and ammunition consumption • Battery life measured in years

friendliness

Aimpoint sights are extremely friendly. Operated by a mechanical switch or push-buttons, an Aimpoint sight can be easily and quickly changed to the right setting while simultaneously aiming through your sight. Our mechanical switch and push buttons won’t freeze and are easy to use whether you are wearing gloves or not.

Environmental awareness

At Aimpoint, we take great pride in making sure that neither hazardous nor radioactive materials are used in our sights.

Quality Aimpoint AB is certified according to ISO 9001:2008, and the manufacturing is executed in a highly controlled process and environment. Each sight is hand-built at our state of the art facilities in Sweden, assigned an individual identification number, and subjected to rigorous testing and numerous quality control checks during the manufacturing process.

Aimpoint’s Advanced Circuit Efficiency Technology We pioneered the development of the red-dot sight in 1975, so every Aimpoint sight has nearly 40 years of advanced electro-optical science built in. Aimpoint’s Advanced Circuit Efficiency Technology combines our superior accuracy and ease of use with significantly lower power usage to maximize battery life.

ACET sights can last up to 80,000 hours (8 years on setting 7 of 10) of constant-on use from a single battery. That´s 79,000 hours more than other competitive sights at the same setting. Aimpoint has taken another giant step forward by applying its scientific expertise in developing the Hunter series sights. The Hunter sights offer full length product performance with features like 34mm tubes and digital brightness adjustments. Place the dot on the target, squeeze the trigger, and your job is done. Add an Aimpoint Hunter sight to your favorite firearm and put our science to the test. We’re ready when you are.

Aimpoint - Global leader

Aimpoint is the recognized worldwide leader and originator of red dot sighting technology. Nearly 40 years of working closely with experienced marksmen and military weapon experts around the world, Aimpoint red dot sights remain the number one choice for combining ruggedness, speed and accuracy. Aimpoint sights are in service with the U.S. Army, the U.S. Air Force, the U.S. Navy, U.S. Marine Corps, and numerous other military forces, police agencies, and special teams worldwide. Soldier tested & combat proven – Don’t settle for anything less!

7

Aimpoint®

Hunting Applications

Welcome to the Aimpoint® Hunting Product Line Aimpoint® red dot sights allow you to hunt in any light conditions and in any climate. They get you on target quickly and are the most rugged red dot sights on the market. Whether you have a rifle, shotgun, handgun, black powder rifle or bow, Aimpoint has a sight for you. And in case you didn´t know, you can shoot as far as your eyes can see the target!

8

9

Aimpoint®

’ 10

The sight for all seasons.

11

The Micro H-1 is truly the “sight for all seasons”. This full-featured compact sight is equally at home on top of your centerfire rifle, shotgun, blackpowder rifle, handgun or bow. A variety of mounts are available to adapt the Micro H-1 to nearly anything you hunt with.

This ability to easily adapt the sight for use across multiple hunting seasons will save you a lot of money in optics purchases, and makes you fast and accurate even on moving targets or in poor light or bad weather. Designed with the hunter in mind, these sights are the smallest and lightest red dot sights tough enough to bear the Aimpoint name.

New!

Now also available in 2 MOA dot!

Features • Ideal for rifles, shotguns, handguns or archery equipment. • Integral Weaver-style mount allows easy attachment. • ACET technology allows 50,000 hours of constant-on operation using one battery. • Available in 2 dot sizes (2 or 4 MOA) • Fully waterproof. • 1X (non-magnifying) parallax free optic. • Mount is keyed to the sight body to absorb recoil. • Precision adjustments for windage and elevation. Top of protective caps fits into holes on adjustment screws - no other tool required. • 1 Off position and 12 settings for use in daylight and lowlight conditions. • 84 g without mount and 105 g with mount.

For more technical information, please see page 70

Micro H-1

Small enough to be used anywhere that you could put iron sights, these sights can be used on any type of firearm or archery equipment. A lightweight rifle with a Micro H-1 mounted on it remains a lightweight rifle. A hunting revolver with a Micro H-1 installed remains as easy to carry as with iron sights and is much quicker to aim. On a bow, the parallax-free Micro H-1 eliminates the need for a peep, allowing you to shoot accurately in lower light.

Micro Mounts

Aimpoint’s Micro H-1 has proven itself both rugged and versatile. With Aimpoint’s mounting options, including our mounts for Glock pistols, Ruger 10/22 and Mark III, Remington 870 and Mossberg 500 shotguns, the Micro H-1 can truly be the only sight you need. For more info see page 60-61

New!

Micro sight with Mount for Blaser rifles

The Micro sight is available with an integrated mount for Blaser rifles. Fits the following rifles: R93, R8, K95, BBF95 + 97, D99, S2 Safari, S2 and BB Classic. The sight and mount are sold as a complete kit only. Kit Art. No. 200090

’

The Aimpoint Micro is lightweight, durable and the red dot has all the illumination settings to make it ideal in rain or shine. With incredible battery life and rugged reliability, I know I can depend on it for every single shot.

Julie Golob

2012 NRA Action Pistol Bianchi Cup Ladies Champion

Call now Toll-free 1-877-246-7646 12

13

Hunter Aimpoint®

’ 14

Top-of-the-line high speed hunting optics

15

H34L

Aimpoint engineers started with a blank page when they designed the Hunter H34L sight, and they came up with an exciting product! This sight incorporates everything that end s have come to expect from Aimpoint sights - legendary ruggedness and battery life measured in years, plus additional features never before offered by Aimpoint; enhanced optical performance provided by a 34mm tube, and a newly designed front-mounted adjustment system that helps get you on target even faster than before.

’

When I drew a Mule Deer Tag for Utah’s Henry Mountains, I knew it would be a once in a lifetime opportunity. That’s why I topped my muzzleloader with the H34L sight from Aimpoint. Regardless of what hunt you are going on, you can’t afford to use “good enough” equipment. One thing I do know is that you can TRUST Aimpoint!

Kevin Orton St. George, Utah

Features • Ideal for use on rifles with standard or magnum actions. The H34L bridges the action with the classic lines of a full length sight. • Two 34mm Weaver-style sight rings supplied with each sight. • 47mm objective diameter with multi-coated lens. • 50,000 hours of constant operation from a single CR-2032 battery. • 2 MOA dot. • Fully waterproof. • 12 position digital push button intensity adjustment. • Adjustment turret caps are the only tools required to zero the sight. • Incredibly fast and accurate. • Legendary Aimpoint toughness. For more technical information, please see page 70

Hunter H34L

Just one look tells you that this is the most advanced hunting sight that Aimpoint has ever built. From the silent operation of the digital push button adjustments, to the rugged tube walls and massive objective lens, these sights are built to hunt in all weather and light conditions. The sleek, modern design complements any firearm. Try the Aimpoint H34L and see just how fast and accurately you can shoot without magnification!

12 position, silent operation digital push button Intensity adjustment with green silicon rubber touch-pad.

Forward mounted windage & elevation adjustments with .5 MOA clicks to get you on target faster.

Up to five years of constanton power from one CR-2032 battery!

47mm objective diameter with multi-coated lens.

Call now Toll-free 1-877-246-7646 16

17

H30L

Trade your old hunting scope for the advantages of an Aimpoint sight! The modern design of the Aimpoint Hunter Series will set you apart in a crowd of antiquated magnified optics. The Hunter H30L features a 30mm tube diameter, which allows these sights to be mounted on your favorite firearm using your standard scope rings!

’

Having confidence in your shooting ability is paramount to being a good hunter. No matter what species I hunt in the world I can depend on my Aimpoint sight to get the job done.

Tom Opre

Host ”Eye of the Hunter” Television

Features • Ideal for use on rifles with standard or magnum actions, plus any hunter who desires the classic lines of a full length sight. • Two 30mm Weaver-style sight rings supplied with each sight. • 43mm objective diameter with multi-coated lens. • 50,000 hours of constant operation from a single CR-2032 battery. • 2 MOA dot. • Fully waterproof. • 12 position digital push button intensity adjustment. • Adjustment turret caps are the only tools required to zero the sight. • Incredibly fast and accurate. • Legendary Aimpoint toughness. For more technical information, please see page 70

Hunter H30L

The Aimpoint sight was born steeped in European hunting tradition. The difficulty in making fast shots to hit moose, wild boar and red stag moving through thick forests in rain and snow, made the illuminated red dot sight a necessity. Using the Hunter H30L, you’ll be able to make the tough shots, and forget about being challenged by bad light or moving targets. Replace your magnified scope and give yourself the advantages of speed and accuracy on your next hunt.

12 position, silent operation digital push button Intensity adjustment with green silicon rubber touch-pad.

Forward mounted windage & elevation adjustments with .5 MOA clicks to get you on target faster.

Up to five years of constanton power from one CR-2032 battery!

43mm objective diameter with multi-coated lens.

Call now Toll-free 1-877-246-7646 18

19

The Aimpoint Hunter H34S sight combines all of the advanced design features of the H34L in a more compact format perfect for rifles with standard length actions and hunting shotguns. You won’t believe how much more clearly these new sights improve image quality in poor light and bad weather.

H34S

’

Dangerous game hunting requires an optic with a wide field of view and an aiming point that’s fast to pick up. Aimpoint’s HUNTER sight proved absolutely perfect on Cape buffalo in the Zambezi flood plain of Mozambique. The red dot stood out like a glowing beacon against the buffalo’s black hide, and my sight picture was totally unrestricted thanks to the large diameter of the HUNTER and its non-magnified field of view. I can’t imagine a better sight for dangerous game.

Cameron Hopkins

Contributing Editor, SPORTS AFIELD

Features • Ideal for use on standard or short action rifles, as well as shotguns, and magnum handguns. • Ultra modern European design features and distinctive visual lines. • Two 34mm Weaver-style sight rings supplied with each sight. • 47mm objective diameter with multi-coated lens. • 50,000 hours of constant operation from a single CR-2032 battery. • 2 MOA dot. • Fully waterproof. • 12 position digital push button intensity adjustment. • Adjustment turret caps are the only tools required to zero the sight. • Incredibly fast and accurate. • Legendary Aimpoint toughness. For more technical information, please see page 70

Hunter H34S

The H34S sight will get you on target fast and you never have to wonder if your battery is going to last through your hunt. As with all Aimpoint Hunter sights, our exclusive ACET diode technology lets you turn this sight on, and leave it on for up to 5 years using a single battery. You’re always ready because your sight is always on. The competition can’t even come close.

12 position, silent operation digital push button Intensity adjustment with green silicon rubber touch-pad.

Forward mounted windage & elevation adjustments with .5 MOA clicks to get you on target faster.

Up to five years of constanton power from one CR-2032 battery!

47mm objective diameter with multi-coated lens.

Call now Toll-free 1-877-246-7646 20

21

H30S

The slim, more compact design of the Aimpoint H30S makes this sight the perfect choice for compact or lightweight firearms, and it can be mounted using any standard 30mm rings. Give yourself the edge with superior situational awareness, and the increased first shot hit percentage of an Aimpoint Hunter sight!

’

Aimpoint’s Hunter series lets me get on target fast, in just about any kind of light or weather condition. The sights are versatile, lightweight, bright and precise, but I’m most impressed with their ruggedness. No matter what rifle they go on, they perform flawlessly.

Andrew McKean Editor - Outdoor Life

Features • Ideal for use on standard or short action rifles, as well as shotguns and magnum handguns. • Two 30mm Weaver-style sight rings supplied with each sight. • 43mm objective diameter with multi-coated lens. • 50,000 hours of constant operation from a single CR-2032 battery. • 2 MOA dot. • Fully waterproof. • 12 position digital push button intensity adjustment. • Adjustment turret caps are the only tools required to zero the sight. • Incredibly fast and accurate. • Legendary Aimpoint toughness.

For more technical information, please see page 70

Hunter H30S

Using an Aimpoint sight means that you will never again miss a trophy shot because your scope was on the wrong magnification. And, because you aim with both eyes open you will never be limited by the “tunnel vision” created by magnified optics. Speed, reliability & accuracy - don’t let your optics slow you down.

12 position, silent operation digital push button Intensity adjustment with green silicon rubber touch-pad.

Forward mounted windage & elevation adjustments with .5 MOA clicks to get you on target faster.

Up to five years of constanton power from one CR-2032 battery!

43mm objective diameter with multi-coated lens.

Call now Toll-free 1-877-246-7646 22

23

Aimpoint®

9000

’

Rich in hunting tradition. A true classic!



24

25

9000L

No matter if you are hunting deer, moose or bear, this full-length sight delivers unmatched performance and reliability. Primarily designed for bolt-action rifles with short, standard or magnum-length actions, the length of the 9000L allows it to fit any long gun suitable for big game hunting.

’

From deer to coyotes and wildebeests to warthogs, I hunt a wide variety of species around the world. With an Aimpoint Hunting Sight, I’m confident I can get on target fast whether I’m at 50 yards in SouthAfrica or 250 yards in South Dakota.

Mike Schoby Editor - Petersen´s Hunting

Features • Ideal for big game and sport shooting rifles with standard or magnum-length actions and semi-automatic rifles. • 2-ring configuration fits nearly all 30 mm ring mounting systems. • New ACET technology allows 50,000 hours of operation on one battery. • Available in 2 dot sizes (2 or 4 MOA) • Fully waterproof.

For more technical information, please see page 71

Aimpoint 9000L

Whether you hunt a local woodlot, the Alaskan wilderness or the plains of Africa, the 9000L can handle whatever hunting conditions you’re likely to encounter. Like all Aimpoint sights, the 9000L is built to handle heavy recoil and is the favorite of big game rifle hunters around the world. Because the 9000L uses Aimpoint’s ACET diode technology, you can leave your sight turned on all season long without worrying about dead batteries.

Call now Toll-free 1-877-246-7646 26

27

9000SC

The 9000SC is a medium-length sight that is designed to be used with two 30mm rings on standard or short action rifles, and hunting shotguns. It also works perfectly when you need a really tough sight for handguns with heavy recoil. The 9000SC is the top choice for turkey and deer hunters, and is a great all-round sight for just about any application from air rifles to magnum revolvers.

’

As group publisher of Field and Stream, Outdoor Life and SHOT Business, I have had the opportunity to hunt with the best products our industry offers. The Aimpoint 9000 is one of the industries finest. If we happen to meet in the turkey woods, you’ll see an Aimpoint sight on my turkey gun...

Eric Zinczenko

Field and Stream/Outdoor Life

Features • Ideal for rifles with short length actions, semi-automatic firearms and magnum handguns. • ACET technology allows 50,000 hours of operation on one battery. • Available in 2 dot sizes (2 or 4 MOA) • 2-ring configuration fits nearly all 30 mm ring mounting systems. • Fully waterproof. • Unparalleled mounting flexibility.

For more technical information, please see page 71

Aimpoint 9000SC

Available in your choice of 2 MOA or 4 MOA dots, the 9000SC will amaze you with its versatility. The ten position rotary intensity switch provides the perfect level of brightness for any situation from dark to bright sunlight. The objective lens opening is threaded to accept a screw-in KillFlash® anti reflection filter, and two 30mm Weaver style rings are included with each sight.

Call now Toll-free 1-877-246-7646 28

29

Comp Aimpoint®

’

The most versatile 30mm single ring sight in the world!

30

31

CompC3

Specifically designed to use whenever you need a compact 30mm sight, the Aimpoint CompC3 is the lightest sight in its class. The CompC3 mounts using a single 30mm ring on a single Weaver-style mount base, and it is perfect for hunting and shooting conditions that demand extreme accuracy and speed. Like all Aimpoint sights, the CompC3 works under all weather conditions and can take the hard knocks that real hunting trips dish out.

’

In the 17 years of my shooting career, I have only used Aimpoint scopes and have never had a failure.

Vera Koo

8X Top Woman Champion NRA Action Pistol Bianchi Cup

Features • Ideal for scout rifles, bows, carbines and competition pistols. • Easy to mount, equipped with 30 mm wide ring that fits all Weaver bases. • New ACET technology allows 50,000 hours of operation on one battery. • Available in one dot size (2 MOA). • Fully waterproof. • Comes with an SRP-W 30mm ring.

For more technical information, please see page 71

Aimpoint CompC3

Aimpoint Comp series sights have been the choice of the U.S. Army and U.S. Air Force since 1997. Just like the M68 Close Combat Optic that you used in the service, the CompC3 is the perfect complement to any lightweight hunting rifle or shotgun. Available with a super accurate 2 minute dot, and just as fast as your old military Aimpoint sight, the CompC3 is as reliable and trustworthy as your best friend. Take a veteran hunting!

Call now Toll-free 1-877-246-7646 32

33

Aimpoint®

Tactical Applications

Welcome to the Aimpoint® Tactical Product Line Elite police and military forces around the world have used Aimpoint® red dot sights for more than 20 years to increase speed and accuracy. Aimpoint® red dot sights are rugged, water proof and withstand any weather conditions. And with battery life measured in years, reliability is never an issue. Whether in the field or on the streets, you can count on Aimpoint® red dot sights!

34

35

Aimpoint®

’ 36

The only compact sights tough enough to carry the Aimpoint brand.

37

No matter what your mission, the size and weight of your equipment is a critical factor. With the Aimpoint Micro T-1, Aimpoint has introduced an aiming system that provides the performance of our full-sized sights in the smallest package possible.

’

In my opinion, Aimpoint is currently making the finest red dot reflex style sights the world has ever seen. Simply put, there is Aimpoint and then there is everything else.

Larry Vickers Vickers Tactical, Inc./TacTV

New!

Now also available in 2 MOA dot!

Features • Ideal for rifles, carbines, shotguns, sub-machineguns, and handguns. • 1X (non-magnifying) parallax free optic. • Micro T-1 is compatible with all generations of Night Vision Devices (NVD). • Micro H-1 is designed for daylight and low light conditions. • Micro T-1 has 1 Off , 4 night vision compatible and 8 daylight settings (including one extra bright ). • Micro H-1 has 1 off and 12 daylight/lowlight settings. • Mount is keyed to the sight body to absorb recoil. • New ACET technology allows 50,000 hours (over 5 years) of constant-on operation from one battery. • Available in 2 dot sizes (2 or 4 MOA) • Micro T-1 is submersible to 80 feet (25 meters). For more technical information, please see page 70

Customize your sight Aimpoint Micro sights are both rugged and versatile. With numerous mounting options the Micro sights can be deployed on nearly every weapon in your armory.

Micro T-1

Built to offer the same battle proven ruggedness as other Aimpoint products, the Micro T-1 is able to perform under extreme conditions while adding negligible weight to your weapon. The Micro T-1 is ideal as a standalone sight, and because it weighs less than 4 ounces including the integrated Picatinny mount, it can easily be “piggybacked” on top of larger magnifying scopes, night vision, or thermal imaging optics. For those applications where night vision compatibility is not required, the Micro H-1 offers additional day and low light settings.

The Micro is rapidly becoming the tactical sight of choice by both law enforcement and military units. Aimpoint now offers two spacers for the Micro which increase mounting options across the AR15/M4 Carbine, HK416, and FN SCAR weapon platforms. For more information about mounting solutions see page 60-61

Micro T-1 / H-1

Micro spacer high

Micro spacer low

Micro LRP mount

Call now Toll-free 1-877-246-7646 38

39

Comp Aimpoint®

’ 40

The global standard for reliability and endurance. The competition can’t even come close.

41

PRO patrol rifle optic

Designed with input from a distinguished group of current and former professionals, the Aimpoint Patrol Rifle Optic (PRO) incorporates many never before seen features to maximize this sight’s performance within the challenging conditions faced by modern law enforcement.

Flip covers are included to further protect the lenses, and a transparent rear lens is utilized allowing the to engage a target with the lens covers closed in an emergency situation. A two Minute of Angle (2 MOA) red dot is utilized to allow maximum accuracy at all distances.

Features • Compatible with all generations of night vision devices and may be used with Aimpoint 3X Magnifier and CEU. • 1x (non-magnifying) parallax free optic. • 2 MOA dot for accurate target engagement at all distances. • ACET Technology allows 30,000 hours (over 3 years) of operation on one single battery. • In-service date and battery change reminders make inventory tracking and maintenance easy. • 4 night vision compatible settings and 6 daylight settings. • Pre-mounted with QRP2 mount for M1913 standard Picatinny rail applications. • Spacer for AR15/M4 carbine application. • Threaded front lens opening allows use of anti-reflection device (ARD). • Submersible to 45m (150 feet). For more technical information, please see page 71

Patrol Rifle Optic

The front lens utilizes a unique band- coating, which allows the sight to be used with all generations of night vision devices. The modular QRP2 mount includes a removable spacer that indexes the sight at the optimal height for co-witness with the standard iron sights on AR15/M16/M4 Carbine style weapons. This spacer can be removed to enable the use of the sight on police shotguns or submachineguns. The QRP2 mount also incorporates a torque-limiting twist knob that provides the optimal level of pressure on the rail while eliminating the possibility of over-tightening. Both the front and rear lenses are recessed within the sight body to provide protection against impact damage, scratches and fingerprints.

’

The PRO sight combines battle proven lineage and world-renowned Aimpoint durability with an affordable package price. It simply doesn’t get any better.

Ben Battles Editor On Target

Call now Toll-free 1-877-246-7646 42

43

CompM4 CompM4s

The Aimpoint CompM4s is the latest version of the U.S. Army’s M68 CCO (Close-Combat Optic), continuing a legacy that Aimpoint has maintained since 1997. Having procured over 1,000,000 Aimpoint sights under contract since 1997, the U.S. military continues to put their trust in Aimpoint quality.

The CompM4 has a top-mounted battery compartment, placing the adjustment knob in the classic position that many shooters expect on an Aimpoint sight.The CompM4s sports a low battery compartment that offers a more streamlined profile. CompM4s

CompM4

Features • Compatible with every generation of Night Vision Devices (NVD). • 1X (non-magnifying) parallax free optic. • Internal voltage regulator allows the CompM4 to be used with any AA size battery. • 7 night vision compatible settings and 9 daylight settings. • Mount base is “keyed” into the body of the sight to absorb recoil. • 500,000 hours of use on NVD setting. • 2 MOA dot for accuracy at all ranges. • Up to 80,000 hours of constant-on power from one AA battery. • Unequalled light transmission for enhanced low light operation. • Submersible to 150 feet (45 meters). • Carry handle adaptor available for use on M16 rifles. For more technical information, please see page 71

Customize your sight

CompM4 and CompM4s

CompM4 and CompM4s sights can be customized according to your preferences and needs. The sight is delivered with a standard mount and a spacer. Both the mount and spacer can be changed to meet the demands of your specific mission and equipment. The extended spacer moves the sight forward, creating additional room on the main rail for a magnifier and back up iron sight (BUIS).

Aimpoint CompM4 and CompM4s sights both include enhanced ACET technology that provide up to 8 YEARS of continuous use from a single AA size battery! Once turned on, Aimpoint sights stay on – there is no automatic shut-off so your optic is always ready whenever you need to use it. The CompM4 and CompM4s incorporate an integrated mount that eliminates the need for a separate ring, and can be customized with vertical and forward spacers to fit a variety of weapon systems.

Rubber Bikini Lens Cover

Complete and ready to mount

All CompM4 sights are shipped complete with a QRP2 mount and standard AR15 spacer. These sights also come equipped with a killFlash® anti-reflection device and MILSPEC rubber lens covers.

ARD killFlash® filter

Standard Spacer

CompM4 or CompM4s Standard spacer Forward spacer

For more information about mounting solutions see page 60-61

QRP2 Mount

QRP2 Mount

LRP Mount

TNP Mount

Call now Toll-free 1-877-246-7646 44

45

CompM3 CompML3

The CompM3 is the top choice of many U.S. Federal agencies. Why? performance features such as five years of constant-on power from a single battery, night vision compatibility, and legendary Aimpoint ruggedness. The CompML3 is just as tough as the CompM3, but built primarily for use in daylight and lowlight conditions. Both the CompM3 and CompML3 will hold up under the roughest physical handling and most severe weather conditions.

Both CompM3 and CompML3 are shipped with a black rubber armor cover to further protect the housing. A flat dark earth cover is available from Aimpoint Dealers as an accessory.

Features • 1X (non-magnifying) parallax free optic. • CompM3 is compatible with Night Vision Devices. • CompML3 is designed for daylight and low- light conditions • ACET technology allows for 50,000 hours (over 5 years) of operation from one battery. • 500,000 hours of use on NVD setting. • Available in 2 dot sizes (2 and 4 MOA). • Submersible to 150 feet (45 meters). • Comes with replaceable outer black rubber cover. • May be used with 30 mm mounts from any manufacturer.

For more technical information, please see page 71

CompM3

’

I have been using Aimpoint sights in one form or another since they first became available. I continue to use them because of their history of ruggedness, reliability and extraordinary battery life. I am so confident in the battery life of Aimpoint sights that I have two M3´s that I never switch off.

Pat Rogers

When it’s time to go, you don’t want to be playing with buttons or worrying whether your batteries are dead or alive. With up to five years of constant-on power, you never have to shut a CompM3 sight off, and you will not be constantly reloading batteries. The CompM3 is also nearly legendary in regard to its ability to function following disasters such as explosions, fires, being dropped, run over by vehicles, and even burned in a helicopter crash. Never compromise on quality when it’s your life on the line.

CompML3

The CompML3 is the right choice for anyone who wants a full featured sight, but doesn’t require Night Vision compatibility. With all the other great features of the CompM3, the CompML3 is a serious alternative for use in daylight and low light applications. Just like the CompM3, the intensity of the red dot on the CompML3 is controlled using a rotary switch, which can be easily manipulated without taking your eyes off the target, and even while wearing gloves.

Owner, EAG Tactical

Call now Toll-free 1-877-246-7646 46

47

Aimpoint®

Miscellaneous Products

’

Specialized products for serious applications.

48

49

The Aimpoint 3XMag magnifying module is a high quality European optic that can be used with any Aimpoint sight for extended range target identification and engagement. This high quality accessory gives the shooter the best of both worlds: rapid CQB aiming with an Aimpoint sight, and long range target acquisition in combination with the magnifier. The Aimpoint TwistMount allows this transition to occur effortlessly and in just a matter of seconds.

3XMag

The 3XMag is ideal for perimeter security and squad designated marksman missions. The versatile 3XMag can also be used as a handheld magnifying monocular for discrete observation and target identification. Art. No. 11324 NSN nr 1240-01-551-5736

Features From CQB to semi-sniping capability and vice versa in a split second.

• Ready to mount behind Aimpoint sights. • Extremely fast on/off quick change mounting solution.

1 CQB capability

2 Place the 3XMag on the TwistMount base

3 Turn clockwise into its final position

• Mounting and dismounting the magnifier has no influence on the point of aim of your sight. No need to re-zero the sight after adding or removing the magnifier.

4

• Internal adjustments allow centering the magnifier to your sight.

Semi-sniping capability

• Rubber armor increases ruggedness. • Drilled and tapped for use with other accessory mounts. • Spacer available to accommodate a wide variety of weapons. • U.S. Army M68 Magnifier.

Technical Specifications

Mechanical interface

Optical System Magnification Objective diameter Field of view (FOV) Exit pupil diameter

3X 25 mm 7° 7 mm

Physical Specifications Dimensions, L x W x H Weight Material housing

110 mm x 44 mm x 41 mm (4.3” x 1.7” x 1.6”) 200 g (7.1 oz) including rubber cover Anodized aluminum, dark grey color. Protective cover: black rubber

Environmental Specifications Temperature range Humidity Water resistance

-45° C to + 70° C, (-50° F - +160° F) in operation and storage 0 – 100% condensing or non-condensing Submersible to 20 m (67 ft)



The recommended mount for the 3XMag is the Aimpoint TwistMount, which allows for quick attachment on any MIL-Std 1913 Picatinny Rail, and also indexes the magnifier for co-witnessing with Aimpoint sight and mount combinations. The 3X Mag can also be attached to aftermarket flip to side mounts using the 4 drilled and tapped screw holes located on the accessory plate located on the bottom of the magnifier. See page 60-61 for more details about the TwistMount.

Call now Toll-free 1-877-246-7646 50

51

The Aimpoint CEU (Concealed Engagement Unit) is the latest component incorporated into Aimpoint’s unique System-of-Systems approach. It gives the operator the ability to observe and/or engage a threat from a concealed or covered position. The Aimpoint CEU easily rotates from side to side, so an operator can safely look around either right or left-hand corners, over barricades and under vehicles. It can also be quickly removed in order to rapidly return to direct engagement.

’

Doug Wyllie

Art. No. 12156 Export license/End- certificate is required for this product.

Editor-in-Chief, “PoliceOne.com”

Features

Image courtesy of Tactical Night Vision Company

CEU

I never thought I could love the Aimpoint CompM4 on my rifle even more than I already did until I added the Aimpoint CEU to the system. This rock-solid device enables the law enforcement or military operator to maximize whatever cover or concealment is available in a given area during a gunfight. The CEU proves that sometimes you don’t know what you don’t have until you finally have it.

• Designed to be compatible with all Aimpoint sights. • Constructed to provide a ‘true image’ NOT a reversed mirror reflection. • Allows aiming over walls, under cars, and around corners without direct exposure to the threat. • Does not affect the sight’s point of aim. • Quick detach TwistMount can also be used with Aimpoint 3X Magnifier, and Night Vision Device rings. • Small and lightweight. • Easily removed from the weapon if necessary. • No need to equip a team member with a specialized weapon or electronic viewing device. • Rotates a full 260°. • Designed to withstand extreme conditions.

Technical Specifications Optical System

Aimpoint CEU

The Aimpoint CEU turns an operator’s standard weapon into a scouting tool that allows for observation over walls, under vehicles or around corners without direct exposure to the threat. The simple and rugged design of the CEU means that it is no longer necessary to rely on a single team member with a specialized weapon or an expensive and fragile electronic device. Since the Aimpoint CEU does not affect the sight´s point of aim, it can easily be ed from one member of a unit to another as long as both weapons are outfitted with an Aimpoint TwistMount. Engaging targets while using the CEU is simple and extremely effective. There is simply no other device on the market using this same proven technology. The Aimpoint CEU is a patented system developed by DSTO in Australia under the name “OffAxis Viewing Device” (OAVD). Aimpoint has world-wide exclusive rights for production and sales of this system outside of Australia.

Operating Principle: Optical Magnification: Clear Aperture: Optical Coating: Optical Signature:

Dual mirror reflective device for true target view. 1x, unlimited eye relief 25 mm diameter “see through” Anti-reflex coated optical elements and high-reflection mirrors for maximum light transmission, NVD compatible The unit does not influence the forward optical signature

Mechanical Interface

The recommended mount for the CEU is the Aimpoint Twist Mount, which allows for quick attachment and detachment. The Aimpoint TwistMount fits any MIL-Std 1913 Picatinny Rail.

The Aimpoint CEU rotates a full 260° allowing the operator to safely look around either right or left-hand corners, up staircases or down tunnels from almost any angle. Featured on pictures above : CEU with Aimpoint® TwistMount™ (Base & high Top ring). See page 60-61 for more details about the TwistMount.

Call now Toll-free 1-877-246-7646 52

53

MPS3

The Aimpoint MPS3 is a ive electronic reflex collimator sight designed for use on medium or heavy weapons. Developed primarily for mounted operations, the MPS3 is ideal for use on land vehicles, helicopters or fastattack boats and ships. Its simplicity of use is based on the “One Function Principle” allowing the to concentrate on the target, aim the weapon with a single red-dot, and operate the sight controls just like when using a standard M68CCO.

The Aimpoint MGMount has been designed specifically for use with the MPS3. The MGMount contains a friendly, 3-step ballistic compensator with preset range adjustments at 200, 800 and 1200 meters (220, 875, 1310 yards). This ballistic compensation can be quickly changed by the operator without losing eye with the target, and can be accomplished even while wearing gloves. The MGMount is compatible with all M1913-Std Picatinny rails. A separate QD rail adaptor for M2 BMG is also available. Export license/End- certificate is required for this product.

Features • 1X (non-magnifying) parallax free optic. • Compatible with every generation of NVD. • ACET technology combined with a AA battery gives 80,000 hours (over 8 years) of typical usage on one battery. • 500,000 hours of use on NVD setting. • Designed to stand up to recoil of heavy weapons. • One Function Principle for simplicity of use in field. • Manually adjustable reticule brightness. • Accessory rails on sight allow for mounting IR or visible lasers. • Multi Purpose Sight for use on land, air and at sea. • 7 night vision compatible settings, 9 day settings of which one extra bright. • 2 MOA dot size for long distance engagement. • Can be used with any AA size battery. For more technical information, please see page 71

Aimpoint MPS3

The Aimpoint MPS3 is a non-magnifying sight with unlimited eye relief, allowing rapid target acquisition and greatly increased first-shot hit probability. The MPS3 features a manually adjustable reticule brightness control for all light conditions. Thanks to its NVD compatibility, the MPS3 can be used 24 hours a day. Aimpoint’s revolutionary ACET technology gives the Aimpoint MPS3 an impressive battery life of up to 80,000 hours (8 years) of continuous use from a single AA battery!

Integrated Picatinny rails on top and side for attachment of accessories such as a laser aiming device

The MGMount comes with a 3- step ballistic compensator. The MGMount can be bought separately. For more information see page 60.

Call now Toll-free 1-877-246-7646 54

55

Mounting solutions

The Aimpoint LPI can be mounted with any of the following interfaces.

LPI

The Aimpoint LPI, IR Laser Aiming Device is an eyesafe, active infrared aiming device for military and Law Enforcement applications. Designed for use in darkness while wearing night vision goggles, the LPI projects a laser aiming dot on the target, visible only to those wearing NVD’s.

LPI-S

LPI-Q

LPI-A

Mount for Aimpoint® standard ring Mount for Aimpoint® QR ring Mount for ARMS ring Rail

LPI-P

QR Mount for Picatinny

Features • Customized intensity setting according to each unit’s needs. 2 effect levels can be selected from 0,005-3,5mW. The max and the min level can be separated by a factor of no more than 20. • Laser axis fully adjustable. • Powered with same battery type (DL 1/3N) as some Aimpoint red dot sights. • Fits right on Aimpoint CompM2 and CompM3 sights. • Submersible to 10 meters (30 ft). • The smallest military IR Laser Aiming Device available on the market.

Technical Specifications Article No. 10932 Light source Setting High Setting Low

Wavelength 840 nm (IR)* 840 nm (IR)*

Adjustment of laser beam Power supply Battery

Aimpoint LPI

The Aimpoint LPI is a perfect complement to the ive aiming system of Aimpoint sights. This extremely compact laser can be mounted directly on the top ring of an Aimpoint CompM2 or CompM3 sight, or on any Picatinny rail using the correct adaptor. The LPI is an eye-safe IR laser designed for tactical team use in building clearing or close combat conditions without overpowering your night vision equipment or reflecting off of interior surfaces.

The LPI is not designed for long range target illumination. The selector switch on the Aimpoint LPI allows the to quickly change the desired intensity of the IR beam. The LPI sighting laser can be quickly adjusted for windage and elevation independent of the red dot sight it is mounted on. A remote on/off switch with custom cable lengths allows the LPI to be activated without the operator changing their grip on the weapon.

Quantity 1

Beam output power 0.1 mW** 0.005 mW** 1 Click = 0.28 mrad Power 3V

Beam Shape 5 x 2 mm 5 x 2 mm

Beam divergence typ 0.5 mrad typ 0.5 mrad

Adjustment range of laser beam Size DL1/3N, 2L76

Laser class 1**

± 20 mrad

Type LiMn02

Unless indicated otherwise, the data is accurate at ambient room temperature and normal operating conditions * Typical ** Important notice: Beam output power will be set as required by the . The is solely responsible for the observation of the applicable safety regulations. The max and the min level can be separated by a factor of no more than 20.

Art. No. 10932 Export license/ End- certificate is required for this product.

Note

To make the product complete, a cable with switch and a mount interface must be determined by the and ordered with the Aimpoint LPI. 4 different mounting solutions are available and the cable is offered at customized length.

Reinforced cable

The length (y in mm) of the reinforced cable with waterproof switch pad shall be measured as shown on the drawing beside:

Call now Toll-free 1-877-246-7646 56

57

Aimpoint®

Mounting Solutions & Accessories

’

Accessories for any adventure and mounts for every application.

58

59

Mounting Solutions

Spacer

SRP-L

Low Wide Ring, 30 mm Black, for CompM3 & ML3 Fits on Picatinny rail (MIL-STD 1913) Art. No. 12243 *

Ring Base & Top SRW-L

Low Wide Ring, 30 mm Black, for CompM3 & ML3 Fits on Weaver rail Art. No. 12244 *

TwistMount

Spacer for QRP/QRW and Twist Mounts. Raises height of optical axis from 30 to 39 mm Art. No. 12227 *

For CompM3 & ML3 Base and Top 30 mm ring. Fits QRP2, QRW2, TRP and TNP Mounts Art. No. 12194 *

Complete Quick Release Mount for 3XMag and CEU Fits on Picatinny rail (MIL-STD 1913) Art. No. 12234 *

Ring for CEU. Fits on TwistMount Base 30 mm height of optical axis Art. No. 12202

Ring for CEU. Fits on TwistMount Base 39 mm height of optical axis Art. No. 12203

Rings 30 mm, Black, one pair For 9000 sights & previous 7000 sights Fits on Weaver rail. Screws, Allen Key included Art. No. 12229

LRP Mount

Lever Release Picatinny Mount for CompM4 and Ring Base & Top. Return to zero after dismounting. Screws, Allen key and thread sealer included. Art. No. 12198

TwistMount Base

Standard Spacer

Extension Spacer

Spacer for CompM4 and CompM3 in conjunction with Art. No. 12194. Mount raises height of optical axis from 30 to 39 mm Art. No. 12192 *

LQR 34 mm rings

Black, one pair. For H34S and H34L Fits on Leupold Quick Release bases Art. No. 12910*

Micro 11 mm Dovetail Mount

Fits most of the 11 mm Dovetail Bases ranging from 10-12,5 mm Screws and Micro Tool included Art. No. 12215

MGMount for MPS3

Contains a 3-step ballistic comp-ensation for 200, 800 and 1200 meters (220, 875, 1310 yards) distances. The mount is also used to zero the MPS3 sight. Export license/End- certificate is required for this product. Art. No. 11925 * NSN No. 1240-01-551-6720

TNP Mount

WH 34 mm rings

Torsion Nut Picatinny (MIL-STD 1913) Mount Fits CompM4 and Ring Base & Top Art. No. 12197 *

Black, one pair. For H34S and H34L Fits on Weaver bases Art. No. 200087*

QRW2 Mount

QRP2 Mount

Quick Release Weaver Mount Fits CompM4 and Ring Base & Top. Return to zero after dismounting (Spacer is necessary for M4 flat top rifles and carbines) Art. No. 11758 *

Quick Release Picatinny (MIL-STD 1913) Mount. Fits CompM4 and Ring Base & Top. Return to zero after dismounting (Spacer is necessary for M4 flat top rifles and carbines) Art. No. 12195 *

Micro Glock Mount

For Micro sights Fits Glock pistols. Screws, Micro Tool and Allen key included. Art. No. 12437

Micro H-1 2MOA w Blaser Mount Black finish, fits Ruger 10/22. Screws, Allen Key and Micro Tool incl. Art. No. 12466

60

Micro Drilling Mount

Fits most of the Merkel Drillings Screws and Micro Tool incl. Art. No. 12200

Micro Safari Mount

Fits most of the Merkel Double Rifles Screws and Micro Tool incl. Art. No. 12201

Micro Mount kit for Ruger MK III

Black finish, fits Ruger MK III Screws, Allen Key and Micro Tool incl. Art. No. 12464

Separate base for TwistMount Fits on Picatinny rail (MIL-STD 1913) Art. No. 12236

Spacer for CompM4 and CompM3 in conjunction with Art. No. 12194. Mount raises height of optical axis from 30 to 39 mm and brings sight 40 mm forwards Art. No. 12193 *

Micro LRP Mount

Lever Release Picatinny Mount for Micro sights. Return to zero after dismounting. Screws, Micro tool and thread sealer included. Art. No. 12905 *

Micro Spacer Low

For Micro sights. Raises height of optical axis to 30 mm. Four screws (torx), Micro Tool and thread sealer included Art. No. 12357

Micro Spacer High

For Micro sights. Raises height of optical axis to 39 mm for cowitness with AR-15. Four screws (torx), Micro Tool and thread sealer included Art. No. 12358

Micro LRP Mount Kit

New! Micro Mount kit for Ruger 10/22

Quick Release Picatinny (MIL-STD 1913) Mount. Fits CompC3, M3 and ML3 Art. No. 12923*

Separate ring for TwistMount Art. No. 12238 *

Rings

CEU High Rise ring

CEU Low Rise ring

QRP3 Mount

TwistMount Ring

Micro H-1 with factory installed Blaser original saddle mount. Only available as a kit with Micro H-1, 2 MOA dot. Fits on all Blaser guns with the Blaser saddle mount interface. Art. No. 200090

Kit to convert Micro sights standard Mount to Lever Release Picatinny Art. No. 12184

* Screws and Allen key included

61

Aimpoint®

Accessories

Flip-up Rear Cover

Flip-up Front Cover For Comp & PRO sights Art. No. 12223

For Comp & PRO sights Art. No. 12224

Polarization Filter Polarization Filter for reduction of sun reflection. Fits rear of Comp & PRO sights Art. No. 12216

DL1/3N, Lithium Battery For PRO, CompM3 & CompML3 Art. No. 10315

Micro Tool Art. No. 12207

CR 2032 Lithium Battery For Micro sights Art. No. 12211

Flip-Up Front Cover with ARD

(open & closed) For Comp & PRO sights Art. No. 12462

62

Flip-up Front Cover Transparent For Comp & PRO sights Art. No. 12241

Flip-up Rear Cover Transparent For Comp & PRO sights Art. No. 12240

Double Battery Kit For CompM3 and CompML3 Art. No. 12247

AA Battery Alkaline For CompM4 Art. No. 12242

Outer Rubber Cover Color: Dark Earth Brown Fits CompM3 & CompML3 Art. No. 12226

Lens Cover For PRO, CompM3 & CompML3 mounted with Quick Release Art. No. 12228

ARD KillFlash® filter for Comp & PRO sights Art. No. 12239

Rubber Bikini Lens Cover For Micro sights Art. No. 12204

Outer Rubber Cover Color: Black Fits CompM3 & CompML3 Art. No. 12225

Rubber Bikini Lens Cover For CompM4 Art. No. 12205

63

Warranty & Customer Service

www.aimpoint.com

Warranty Information

Aimpoint values your business and always attempts to provide you the very best of products and services. That’s why we back our products with one of the best guarantees in the industry.   Our products are guaranteed to be free from original manufacturer defects in material and/or workmanship under normal use from the date of purchase for ten (10) years for personal use and two (2) years for professional or competition use. If a defect that is covered by our warranty occurs during that period, Aimpoint, at its option, will either repair, or replace the product.

Dealership Eligibility

Dealership eligibility and requirements for the USA may be obtained by ing Aimpoint Inc. at 1-877-246-7646.

Customer Service

Here at Aimpoint, we are delighted to have you as a customer. In addition to offering the best products in the marketplace, we are committed to providing our valued customers with the finest customer service available. Whatever your question, comment, or problem, just give us a call Toll Free at 1-877-246-7646 between 9am-5pm EST, Monday-Friday, or e-mail us anytime at [email protected] Our courteous and informed staff is ready to help.

All Rights Reserved

All Aimpoint products are covered by several international patents. Comp is a ed trademark of Aimpoint AB, Malmö, Sweden. We reserve the right to make design and/ or material modifications without further notice. This printed material is for information purposes only and does not constitute any binding obligation, or agreement by Aimpoint AB.

© 2013 Aimpoint AB

’

I recently deployed to Iraq and, being unhappy with the options of issue weapon sights, I was turned on to the T-1 Micro. I immediately fell in love with the small, accurate sight in competition and practice. During the early part of my deployment it stood up to extremely tough duty including being slammed by a 500 lb HMMWV door. However, that was nothing compared with what was to come. On 29 June, our base was attacked with four 240mm Rockets. Each was the size of a hot water heater, carried 300 lbs of explosives, and were extremely accurate. We lost three good men in the attack and I, along with two other men, was seriously wounded. I required 5 major surgeries to fix shrapnel wounds that broke my arm and embedded along my right side. My weapon with the T-1 mounted on it was in the tent twenty feet from the rocket impact that wounded me. The weapon, flashlight, all of my gear, and everything else in the office was destroyed by the explosion and subsequent fire. When sifting through the ashes my Soldiers recovered the T-1. It looked no worse for wear (the M-4 was cut in half at the slip ring). Incredibly, it still worked despite having a cracked lens. I have yet to try it to see if it maintained zero but I would not be surprised. I’m writing this first and foremost to say thank you for making such an excellent product. No other item survived the explosion in working condition. I’m proud to have carried and used it in combat and proud that I will be able to do it again.... Again thank you for the quality product. You can bet the next time I step into harms way I’ll be carrying a weapon with an Aimpoint sight on it.

T James Finn U.S. Army Cavalry

64

65

Aimpoint®

System-of-Systems CEU

3XMag

Integrated combat optics solution Aimpoint has distinguished itself as a supplier of sophisticated modular sighting systems, offering end s not just stand alone products but rather complete modular optical solutions. Although the primary focus for Aimpoint has always been the electronic reflex collimator (red dot) sight. We also offer a choice of modular accessories that can be used together with Aimpoint sights in order to enhance an operator´s capabilities. In our System-of-Systems solution, the versatile TwistMount enables accessories such as the Aimpoint 3XMag (magnification module, see picture below) and the Aimpoint CEU (concealed engagement unit, see picture below) to be rapidly fixed behind

66

Aimpoint sights. Night Vision Devices (NVD’s) of all types and generations can also be added as part of this modular system. Since the accessories are placed behind the red dot sight, they do not affect the point of impact. Therefore, they can easily be ed from one member of a unit to another as long as both weapons are outfitted with the proper interface – the base of the Aimpoint TwistMount which fits any MIL-STD 1913 Picatinny rail. There is simply no other device on the market using the same technology. Aimpoint’s modular System-of-Systems approach enables the operator to modify their equipment for each specific mission, and to rapidly adapt to changing conditions in the field.

67

Aimpoint®

Technical Specifications

68

69

Application areas Hunters Action shooters Law Enforcement Armed Forces - Special Units



Micro H-1

Micro T-1

Hunter H34S

Hunter H30S

9000SC

9000L

CompC3

PRO

MPS3

CompM3/ML3

• • • -

o - • •

Hunter H34L Hunter H30L • - - -

• - - -

• - - -

• - - -

• - - -

• - - -

• • - -

- - • o

- - - •

- - • •

CompM4/M4s - - • •

• • o • • • • • o -

• o o o o o • • • -

- - - o o • - - - -

- - - o o • - - - -

o - • • • o • - - -

o - • • • o • - - -

• - • • • - • o - -

- - - o o • - - - -

• • - • • o • • - -

- - - - - - - • - -

- - - - - - - - - •

- - - - - - • • • -

- - - - - - o • • -

x

x

x

x

x

x

x

x

x

x

x

x

x x x x x x x x x x x x x x x x 2 or 4 2 2 2 2 2 or 4 2 or 4 2 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

x x 2 x x x x x

x x 2 x x x x x

x x 2 or 4 x x CompM3 only x x

x x 2 x x x x x



Application Firearms Pistol - Revolver Bow Magnum handgun1 Semi-automatic rifle Rifle with short length Rifle with standard length action Scout rifle Carbine, PDW (personal weapon defence), SMG (sub-machine gun) LMG (light machine gun), MMG (medium machine gun) HMG (heavy machine gun)

Technology Working principle: Reflex collimator sight - red dot sight x Optical Data LED (Light Emitting Diode) totally eye-safe x Light source wave length, 650 nm red light x Red dot size - in MOA (minutes of angle)* 2 or 4 No parallax - No centering required x Unlimited eye relief x Band coating for NVD**** compatibility Anti-reflex coating all surfaces & multi-layer coating objective lens x No magnification (1X) x

Electronic Data One 3V Lithium battery, type CR2032 CR2032 CR2032 CR2032 CR2032 CR2032 2 L76 or DL1/3N 2 L76 or DL1/3N 2L76 or DL1/3N 2L76 or DL1/3N 2L76 or DL1/3N One AA battery, accepts 1.5-5V x x Battery life, in hours** 50 000 A 50 000 A 50 000 B 50 000 B 50 000 B 50 000 B 50 000 C 50 000 C 50 000 C 30 000 C on setting 7 80 000 on setting 12 50 000 C on setting 7 80 000 on setting 12 Battery life, in hours**, NVD position 500 000 300 000 500 000 500 000 CompM3 500 000 Manual rotary switch - Dot intensity regulator x x x x x x x x x Digital push button - Dot intensity regulator x x x x 1 Off and daylight (DL) settings 12 DL 12 DL 12 DL 12 DL 12 DL 9 DL 9 DL 9 DL CompML3: 9 DL NVD and daylight (DL) settings 1 Off, 4 NVD & 8 DL 4 NVD & 6 DL 7 NVD & 9 DL CompM3: 4 NVD & 6 DL 7 NVD & 9 DL of which one extra bright of which one extra bright of which one extra bright of which one extra bright of which one extra bright Mechanical data Material housing and tube, high strength aluminum x x x x x x x x x x x x x Surface finish housing, anodized, matte x x x x x x x x Surface finish housing, hard-anodized, matte x x x x x Color housing Black Black Black Black Black Black Black Black Black Black Black Black Black Color touch pad - dark green x x x x Material touch pad - Silicon rubber x x x x Material lens covers - Polymer - black x x x x x x x Material lens covers - Rubber - black - matte x x x x Material lens covers -Thermoplastic Elastomer, black matte x x Adjustment 1 click = 1/2” at 100yds 1/2” at 100yds 1/2” at 80yds 1/2” at 80yds 1/2” at 80yds 1/2” at 80yds 1/2” at 100yds 1/2” at 100yds 1/2” at 100yds 1/2” at 100yds 2” at 100yds 1/2” at 100yds 1/2” at 80yds 13mm at 100m 13mm at 100m 20mm at 100m 20mm at 100m 20mm at 100m 20mm at 100m 13mm at 100m 13mm at 100m 13mm at 100m 13mm at 100m 50mm at 100m 13mm at 100m 16mm at 100m Mounting methods Integrated Integrated 2 Rings 2 Rings 2 Rings 2 Rings 2 Rings 2 Rings 1 Ring Integrated QRP2 Optional MGMount 1 Ring Integrated QRP2 Picatinny/Weaver Picatinny/ Weaver ø 34mm ø 30mm ø 34mm ø 30mm ø 30mm ø 30mm ø 30mm (Quick release) ø 30mm (Quick release) Environmental data Temperature range, -20°- +140°F (-30° - +60°C) x x x x x x x x Temperature range -50°- +160° F (-45° - +71° C) x x x x Fully waterproof x x x x x x x x Water resistance - submersible to 80ft / 25m 150ft / 45m 3ft / 1m 150ft / 45m No radioactive material used x x x x x x x x x x x x



Dimensions Length Width x height - including mount

2.4” / 62mm 1.6”x1.6” 41mm x 40mm

x 150ft / 45m x



2.4” / 62mm 9.0” / 229mm 9.0” / 229mm 7.75” / 197mm 7.75” / 197mm 6.3” / 160mm 7.9” / 200mm 4.7” / 120mm 1.6”x1.6” 41mm x 40mm

5.1” / 130mm 2.95” x 2.95” 75x75mm

6.9” / 175mm 5.1” / 130mm 3.3” x 4.9” (84 x 124mm)

Objective diameter 1.1” / 28mm 1.1” / 28mm 1.85” / 47mm 1.7” / 43mm 1.85” / 47mm 1.7” / 43mm 1.5” / 38mm 1.5” / 38mm 1.5” / 38mm 1.5” / 38mm 2.36” / 60mm 1.5” / 38mm Tube diameter 34mm 30mm 34mm 30mm 30mm 30mm 30mm 30mm 30mm Maximum distance between rings 5.9” / 150mm 5.9” / 150mm 4.6” / 118mm 4.6” / 118mm 4.5” / 115mm 6.1” / 155mm Minimum distance between rings 1.77” / 45mm 1.77” / 45mm 1.77” / 45mm 1.77” / 45mm 2.0” / 50mm 2.4” / 60mm Maximum ring width 30mm 30mm 30mm Weight sight only 3.0oz / 84g 3.0oz / 84g 9.2oz / 260g 8.3oz / 235g 8.8oz / 250g 7.9oz / 225g 7.4oz / 210g 8.1oz / 230g 7.1oz / 200g 7.8oz / 220g*** 25.4oz / 720g*** 7.8oz / 220g*** Weight sight with integrated mount 3.7oz / 105g 3.7oz / 105g 11.6oz / 330g Weight of rubber cover 1.7oz / 50g

4.7” / 120mm 2.8” x 2.8” 72x72mm 1.5” / 38mm



9.3oz / 265g 11.8oz / 335g



ARTICLE NUMBERs 4 MOA

11910 11830 11407 11406 2 MOA 200018 12417 12693 12691 12692 12690 11417 11419 11421 12841 11704

70

11403 (CompM3) 11405 (CompML3) 11408 (CompM3) 11416 (CompML3)



11972 (CompM4) 12172 (CompM4s)

NSN - Numbers 1240-01-551-5758 1240-01-551-5748 1240-01-551-5762 (CompM4) 1240-12-382-6939 (CompM4s) • primary use o secondary use - not recommended x applies for * MOA (minute of angle) 1 MOA ≈ 30 mm at 100 meters ≈ 1” at 100 yards ** at room temperature ** A at room temperature & at setting 8 out of 12 ** B at room temperature & at start-up setting (7) 1 Optics must be mounted using two heavy duty steel mounting rings and a solid one piece mounting base designed specifically for use with these revolvers. ** C at room temperature & at setting 7 out of 10 *** Dimensions and weights for PRO, CompM2, ML2, M3, ML3 are given with flip-up lenscovers Specifications are subject to change without notice. **** Night Vision Device

71