287651884-mx-fire-detection-control--fmz-4100-pdf.pdf v3t3y
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 2z6p3t
Overview 5o1f4z
& View 287651884-mx-fire-detection-control--fmz-4100-pdf.pdf as PDF for free.
More details 6z3438
- Words: 2,622
- Pages: 6
Fire Detection Control FMZ 4100
The Minimax fire detection control FMZ 4100 is a compact function centre with high availability, combining all the advantages of modern micro-electronics. The reliable and reasonably priced line technology is ideal for the monitoring of large areas. In addition, digital information can be transferred from each detector thus enabling, amongst other things, individual single alarm identification. As a result of this, it is possible to combine many small areas or rooms in only one detector group. The activated detector can then be clearly identified on the LC display of the fire detection control . The heart of the control is a micro processor controlled analysis unit. This unit is responsible for all monitoring and control functions and because of its inbuilt automatic interrupt control function it can react to alarm signals without delay. The itself is monitored by a watchdog timer which is reactivated each time data es through the cyclic running programme. If the trigger impulse fails to
appear, the programme controlled alarm analysis is interrupted in order to avoid any faulty functioning. In this case, the alarm evaluation continues to function by means of an emergency operational circuit. In the case of interference, maximum only one plug-in unit will fail to function due to the parallel operation of the different analysis units. It is also possible to exchange defective components without any operational interruptions occuring. The fire detection control FMZ 4100 contains all of the essential performance features of the earlier Minimax devices. Additionally, it fulfills all requirements of a modern comprehensive safety-information system with an integrated detector identification system and a large LC display as well as having a report printer, status and intervention system and an interface to building stration systems. These features enable an exact evaluation of the incoming alarms so that preventative measures may be carried out quickly.
Minimax's experience collected over many years in the field of evaluation and assessment of fire characteristics is to be found in an extensive, error-tolerant analysis software. The software enables the system to differentiate between alarm signals and spurious ( parasitic) signals. By means of a dialogue between the fire detection control and himself, the is led through the necessary operational phases thereby ruling out, to the greatest possible extent, all possibility of problems arising from incorrect operating or stress influenced abnormal behaviour in the case of alarms or disturbances. The fire detection control FMZ 4100 fulfills the highest safety requirements which are, of course, indispensable in the field of fire protection. The control including the system's components are in accordance with the valid guidelines, norms and regulations – especially VDE and EN 54 – and is approved by the ”Verband der Schadenversicherer“ (VdS, Association of German Property Insurers).
Design variants The fire detection control is a modular extendable 19" unit assembly system. Even in its smallest basic design (GAB 32), it is capable of accomodating 2 x 32 fire alarm groups and 32 primary control groups, besides the central equipment such as the power supply unit, battery and main alarm tripping. In the larger model (GAB 128), the system can be extended to 3 x 128 groups by means of additional plug-in zone modules. In this case, a common central plug-in unit (master system) takes over the overriding control procedure for the otherwise autarkic plug-in zone modules (master-slave process). A total combination of 3072 groups can be obtained by ing together up to 8 standing cabinets of the above type.
FMZ 4100 - GAB 32 is extendable, with each device having 32 automatic and giving fire alarm groups as well as primary control groups for the electrical monitoring and for the operating of the important function alarm devices such as alarm horns, release solenoids, etc.
Wall mounted cabinet 15U
FMZ 4100 - GAB 128 is extendable, with each device having 128 automatic and giving fire alarm zones as well as primary control groups. Upright cabinet 31U
Each group is connected to the line card via line termination cards. Using one line card, it is possible to supply, evaluate and monitor 4 alarm groups for automatic fire alarms, 4 alarm groups for giving fire alarms and 4 primary control groups. A reduced version can be supplied when only 4 automatic fire alarm groups are required. The alarm signals recorded in the fire control are digitalized and are then, in comparison between normal condition and actual condition, compared with the programmed values in the non-volatile memory. In the case of negative results, either an alarm signal or an interference signal (e.g. ”wire breakage“, ”short circuit“, ”detector removed“) is produced. A redundant, independent alarm circuit continues to conduct the alarm even in the case of interference or breakdown of the control system. Important alarm devices are connected to the quiescent current monitoring of the primary control groups.
Detector identification system (ZID-V) This is a system component which functions independently from the analysis unit. It displays selectively the position and type of the activated, defective or removed detectors. The main component of this device is a microcontroller which additionally and unidirectionally requests data from the detector via a secondary network. A specially developed analysis software checks the detector’s signal for accuracy and then evaluates it. The obtained results are transmitted asynchronously to the analysis unit via FIFO-circuits where they are then displayed on a comprehensive 8 x 40 figure alpha-numerical LC display. The detector identification system, the alpha-numerical clear text display and the report printer complement each other and together form an important information system thus enabling the quick introduction of decisive and appropriate measures.
Extinguishing control for the fire extinguishing system The system component ”extinguishing control“ is used to control single and multi-
Alarm and graphics reporting system
zone fire extinguishing systems. It functions independently from the other systems of the fire detection control and therefore has its own display and operating . Each extinguishing zone is controlled and monitored by an autarkical functioning extinguishing control card. All the important components which are necessary for the trouble-free functioning of an extinguishing system (e.g. detectors, release and alarm) devices are connected to the extinguishing control system. In the case of alarm, the extinguishing control system s and analyses the detector signal, sounds the fire alarm and activates the pre-programmed control function as well as the fire extinguishing system.
Programming The fire detection control FMZ 4100 can be programmed for different applications. For this purpose a special configuration programme has been developed which transforms the physical values of entered characteristics (e.g. alarm threshold, short circuit threshold, etc.) into a ”language“ understandable for the microcontroller. In this way, the has the maximum amount of flexibility which, for instance, is required when extending already existing systems. Programming is greatly simplified by the use of modern ”pull-down-menu-techniques“ and easy-to-understand input instructions.
Secondary groups The fire detection control FMZ 4100 can be equipped with free programmable relays in order to enable further alarm organization, for example: the disconnection of the air conditioning, the interruption of the manufacturing process, the opening of smoke vent flaps, etc. 2 break s (b-s) and 2 make s (a-s) with a maximum load of 2 amperes are available for each relay. The operating and logical combination of the relays is determined for each specific system by means of the Minimax configuration programme. The standard functions are as follows: operating tripped by alarm, pre-alarm and interferences as well as the disconnection of fire detector groups.
ZID-V detector
Serial interfaces The fire detection control FMZ 4100 has standard serial interfaces for connection to external equipment, e.g. alarm and graphics reporting system or printer, as well as enabling communication with a superordinate istration system. An additional microcontroller circuit which has been especially developed for the operating of repeater s as well as externally situated control devices can exchange information with the fire detection control via a serial interface. There are 768 programmable outputs available for the operating of the LEDs in a repeater . Additionally, the microcontroller has a serial interface for data transmission, e.g. for a desk-top printer. The fire detection control FMZ 4100 offers further interfaces for fire brigade control s as well as for the so-called ”public main alarm“. An alarm signal can be automatically transmitted further to an external service, e.g. fire brigade, by means of the main alarm function. Additional VdS standard interfaces are available for the connection of fire detection equipment from other manufacturers to the FMZ 4100 extinguishing control system.
Special applications Spark extinguishing systems The possibility of realizing special applications of fire detection and extinguishing technology were taken into consideration during the development of the fire detection control FMZ 4100. These special applications are, for example, spark extinguishing systems for the wood industry, fire suppression systems for paint spraying plants as well as for the protection of equipment in computing centres. If one takes the spark extinguishing system as an example, it can be seen that this system can be connected to the control without any special or additional analyzing electronics. All the requirements necessary for operating a spark extinguishing system such as adjustable extinguishing times for each extinguishing area, monitoring of the extinguishing agent supply, electrical monitoring of heat tapes and leak detectors are to be found in the standard programme of the control . It is, therefore, guaranteed that the evaluation of spark alarms as well as the operating of the automatic extinguishing system will be carried out with virtually no delay. Gas detectors A gas detector is an autonomous subsystem that can be easily integrated in the FMZ 4100 fire detection control . Owing to the increasingly complex chemical processes used in industry, gas detection at an early stage is often the main element of a safety scheme and is accordingly very suitable for combination with fire detection and fire systems. A display continuously indicates the gas concentrations in the gas detectors. If the gas concentration measured exceeds a preset limit, external equipment can be activated via secondary control lines. All measured data is ed on to the FMZ 4100 where it is recorded. This assures the traceability of events even after a lengthy period.
Scheme of control FMZ 4100 Fire brigade operating
Report printer Building management system
Serial interface
Alarm and graphics reporting system Repeater Slave control s
Network interface
Operator extinguishing control Manual release Second release Extinguishing delay System monitoring
Field termination card extinguishing system control EMI protection
Multi-zone extinguishing control system
Field termination card for primary control zones EMI protection
Automatic release
CO 2 low pressure system
CO 2 / Argon high pressure system
O • • • • •
FMZ 4100 multi zone CO2 extinguishing control
Fire protection for paint spraying plants
Fire brigade key box
Mimic
Fire brigade main alarm
Operator
Group LEDs
Line card Master U peripheral evaluation and control
Field termination card for detector groups EMI protection
Automatic detectors
Field termination card for primary control groups EMI protection
Optical / acoustic alarm
giving detectors
Trigger solenoid valve Air condition off
Relay control card Slave U 1 evaluation and control
Relay card
Detector identification system System Gas detection Gas line card
Concentration display and operating
Other extinguishing systems • Deluge• Foam-/Powder• Spark• Pre-action Sprinkler• Argon extinguishing system
Minimax detector collection
Machinery off Smoke vent unlock Field termination card detector identification
Detector identification for automatic and giving detectors
EMI protection
Gas detector
Termination and control card
Optical / acoustic alarm Machinery off
Digital system monitoring
Evaluation and control system
Quiescent current monitoring
Detector identification system
Non monitored lines
Extinguishing control system Gas detection system
Fire protection for EDP installations
Repeater
Interface to slave module
Processor card
Master plug-in card
Field termination card detector identification Interface to master module
Detector identification card
Relay card
Relay control card
Extinguishing control card
Fire detection and extinguishing control for 384 groups
Field termination card for detector groups
Field termination card for primary control groups
Line card for 4 automatic, giving and primary control groups
Field termination card for detector groups
Line card for 4 automatic groups
Technical Data Fire Detection Control FMZ 4100 GAB 32, GAB 96, GAB 128 Specific System Data Power supply Operating voltages Control voltage of external devices Emergency power supply Control relay rating Control signal of main alarm Permissible ambient temperature Permissible ambient air humidity Place of installation VdS approval FM approval
230 V /110 V, 50/60 Hz, (+10 %, -15 %) switchable by jumper at power supply 15 V, 12 V, 5 V 24 V DC 24 V DC (2 x 12 V maintenance free and sealed batteries, independent of position, deep-discharge resitant, capacity range application specific) 30 W/60 VA /1.5 A / 250 V 24 V DC, constant or pulses, adjustable from 1 to 10 seconds -5 - +40 °C 12 g /m3 dry operating areas with restricted access G 29013 OY4AO.AY
Specific Data
FMZ 4100 GAB32
FMZ 4100 GAB96
FMZ 4100 GAB128
Max. number of groups Serial interfaces RS 232C Number of control relays with full complement Housing type
32/ 32/ 321 2 80 wall-mounted 15U swivel frame RAL 7032, grey, structured approx. 48 kg IP 42 525 x 709 x 275
96/ 96/ 961 3 224 upright cabinet 31U swivel frame RAL 7032, grey, structured approx. 135 kg IP 54 800 x 1600 x 500
128 /128 /1281 2 296 upright cabinet 40U swivel frame RAL 7032, grey, structured approx. 160 kg IP 54 800 x 2060 x 600
Colour Weight of complete unit (without batteries) IP rating Dimensions in mm (W x H x D) 2 Line cards 3 Automatic detector groups Detection Group voltage Detection Group quiescent current Detection Group alarm current Detection Group terminating resistance Alarm resistance (detector) Permissible max. line resistance Permissible max. number of detectors per group
9V approx. 5 mA ≥ 9 mA (spark extinguishing system: ≥ 15 mA) 4 1800 470 - 1000 50 10 manual call points or 60 sprinkler monitoring modules 5
giving detector groups Detection Group current Detection Group quiescent voltage Detection Group alarm voltage Detection Group terminating zener diode Detection Group alarm zener diode Permissible max. line resistance Permissible max. amount of detectors per groups
approx. 2.2 mA 3.9 - 4.1 V 2.7 V 4 ZPD 4V3 (spark extinguishing system BZX 4V3) ZPD 2V7 (spark extinguishing system BZX 2V4)6 50 10 5
Primary control groups Detection Group current Control voltage Detection Group quiescent voltage Max. load Detection Group terminating resistance
approx. 2.6 mA 24 V DC approx. 2.6 V 2 A ( limited by fuse) 1000 /1 Watt
Fire extinguishing control system
3 4 5 6 7
For 32, 96 or 128 automatic and giving groups and primary control groups Other cabinet sizes available A reduced version can be supplied when only automatic fire alarm groups are required Other current/voltage threshold values programmable VdS standard value For evaluation of different interferences in sparc extinguishing systems, e.g. continuous extinguishing, water supply fault, 3 additional thershold voltage values are monitored Technical data for groups of the extinguishing control system are similar to the line card The right is reserved to modify any specification without prior notice.
Minimax GmbH & Co. KG Industriestrasse 10 /12 23840 Bad Oldesloe Phone: +49 45 31 8 03-0 Fax: +49 45 31 8 03-2 48 E-mail: [email protected] www.minimax.de
VdS Certified acc. to ISO 9001
F 15e/2.96/2/01.05/HMB
2
No. S 89201
1
Printed in Gernmany
4 groups for automatic detectors 7 4 groups for giving detectors 7 4 primary control groups7 8 free programmable relays for non monitored groups
The Minimax fire detection control FMZ 4100 is a compact function centre with high availability, combining all the advantages of modern micro-electronics. The reliable and reasonably priced line technology is ideal for the monitoring of large areas. In addition, digital information can be transferred from each detector thus enabling, amongst other things, individual single alarm identification. As a result of this, it is possible to combine many small areas or rooms in only one detector group. The activated detector can then be clearly identified on the LC display of the fire detection control . The heart of the control is a micro processor controlled analysis unit. This unit is responsible for all monitoring and control functions and because of its inbuilt automatic interrupt control function it can react to alarm signals without delay. The itself is monitored by a watchdog timer which is reactivated each time data es through the cyclic running programme. If the trigger impulse fails to
appear, the programme controlled alarm analysis is interrupted in order to avoid any faulty functioning. In this case, the alarm evaluation continues to function by means of an emergency operational circuit. In the case of interference, maximum only one plug-in unit will fail to function due to the parallel operation of the different analysis units. It is also possible to exchange defective components without any operational interruptions occuring. The fire detection control FMZ 4100 contains all of the essential performance features of the earlier Minimax devices. Additionally, it fulfills all requirements of a modern comprehensive safety-information system with an integrated detector identification system and a large LC display as well as having a report printer, status and intervention system and an interface to building stration systems. These features enable an exact evaluation of the incoming alarms so that preventative measures may be carried out quickly.
Minimax's experience collected over many years in the field of evaluation and assessment of fire characteristics is to be found in an extensive, error-tolerant analysis software. The software enables the system to differentiate between alarm signals and spurious ( parasitic) signals. By means of a dialogue between the fire detection control and himself, the is led through the necessary operational phases thereby ruling out, to the greatest possible extent, all possibility of problems arising from incorrect operating or stress influenced abnormal behaviour in the case of alarms or disturbances. The fire detection control FMZ 4100 fulfills the highest safety requirements which are, of course, indispensable in the field of fire protection. The control including the system's components are in accordance with the valid guidelines, norms and regulations – especially VDE and EN 54 – and is approved by the ”Verband der Schadenversicherer“ (VdS, Association of German Property Insurers).
Design variants The fire detection control is a modular extendable 19" unit assembly system. Even in its smallest basic design (GAB 32), it is capable of accomodating 2 x 32 fire alarm groups and 32 primary control groups, besides the central equipment such as the power supply unit, battery and main alarm tripping. In the larger model (GAB 128), the system can be extended to 3 x 128 groups by means of additional plug-in zone modules. In this case, a common central plug-in unit (master system) takes over the overriding control procedure for the otherwise autarkic plug-in zone modules (master-slave process). A total combination of 3072 groups can be obtained by ing together up to 8 standing cabinets of the above type.
FMZ 4100 - GAB 32 is extendable, with each device having 32 automatic and giving fire alarm groups as well as primary control groups for the electrical monitoring and for the operating of the important function alarm devices such as alarm horns, release solenoids, etc.
Wall mounted cabinet 15U
FMZ 4100 - GAB 128 is extendable, with each device having 128 automatic and giving fire alarm zones as well as primary control groups. Upright cabinet 31U
Each group is connected to the line card via line termination cards. Using one line card, it is possible to supply, evaluate and monitor 4 alarm groups for automatic fire alarms, 4 alarm groups for giving fire alarms and 4 primary control groups. A reduced version can be supplied when only 4 automatic fire alarm groups are required. The alarm signals recorded in the fire control are digitalized and are then, in comparison between normal condition and actual condition, compared with the programmed values in the non-volatile memory. In the case of negative results, either an alarm signal or an interference signal (e.g. ”wire breakage“, ”short circuit“, ”detector removed“) is produced. A redundant, independent alarm circuit continues to conduct the alarm even in the case of interference or breakdown of the control system. Important alarm devices are connected to the quiescent current monitoring of the primary control groups.
Detector identification system (ZID-V) This is a system component which functions independently from the analysis unit. It displays selectively the position and type of the activated, defective or removed detectors. The main component of this device is a microcontroller which additionally and unidirectionally requests data from the detector via a secondary network. A specially developed analysis software checks the detector’s signal for accuracy and then evaluates it. The obtained results are transmitted asynchronously to the analysis unit via FIFO-circuits where they are then displayed on a comprehensive 8 x 40 figure alpha-numerical LC display. The detector identification system, the alpha-numerical clear text display and the report printer complement each other and together form an important information system thus enabling the quick introduction of decisive and appropriate measures.
Extinguishing control for the fire extinguishing system The system component ”extinguishing control“ is used to control single and multi-
Alarm and graphics reporting system
zone fire extinguishing systems. It functions independently from the other systems of the fire detection control and therefore has its own display and operating . Each extinguishing zone is controlled and monitored by an autarkical functioning extinguishing control card. All the important components which are necessary for the trouble-free functioning of an extinguishing system (e.g. detectors, release and alarm) devices are connected to the extinguishing control system. In the case of alarm, the extinguishing control system s and analyses the detector signal, sounds the fire alarm and activates the pre-programmed control function as well as the fire extinguishing system.
Programming The fire detection control FMZ 4100 can be programmed for different applications. For this purpose a special configuration programme has been developed which transforms the physical values of entered characteristics (e.g. alarm threshold, short circuit threshold, etc.) into a ”language“ understandable for the microcontroller. In this way, the has the maximum amount of flexibility which, for instance, is required when extending already existing systems. Programming is greatly simplified by the use of modern ”pull-down-menu-techniques“ and easy-to-understand input instructions.
Secondary groups The fire detection control FMZ 4100 can be equipped with free programmable relays in order to enable further alarm organization, for example: the disconnection of the air conditioning, the interruption of the manufacturing process, the opening of smoke vent flaps, etc. 2 break s (b-s) and 2 make s (a-s) with a maximum load of 2 amperes are available for each relay. The operating and logical combination of the relays is determined for each specific system by means of the Minimax configuration programme. The standard functions are as follows: operating tripped by alarm, pre-alarm and interferences as well as the disconnection of fire detector groups.
ZID-V detector
Serial interfaces The fire detection control FMZ 4100 has standard serial interfaces for connection to external equipment, e.g. alarm and graphics reporting system or printer, as well as enabling communication with a superordinate istration system. An additional microcontroller circuit which has been especially developed for the operating of repeater s as well as externally situated control devices can exchange information with the fire detection control via a serial interface. There are 768 programmable outputs available for the operating of the LEDs in a repeater . Additionally, the microcontroller has a serial interface for data transmission, e.g. for a desk-top printer. The fire detection control FMZ 4100 offers further interfaces for fire brigade control s as well as for the so-called ”public main alarm“. An alarm signal can be automatically transmitted further to an external service, e.g. fire brigade, by means of the main alarm function. Additional VdS standard interfaces are available for the connection of fire detection equipment from other manufacturers to the FMZ 4100 extinguishing control system.
Special applications Spark extinguishing systems The possibility of realizing special applications of fire detection and extinguishing technology were taken into consideration during the development of the fire detection control FMZ 4100. These special applications are, for example, spark extinguishing systems for the wood industry, fire suppression systems for paint spraying plants as well as for the protection of equipment in computing centres. If one takes the spark extinguishing system as an example, it can be seen that this system can be connected to the control without any special or additional analyzing electronics. All the requirements necessary for operating a spark extinguishing system such as adjustable extinguishing times for each extinguishing area, monitoring of the extinguishing agent supply, electrical monitoring of heat tapes and leak detectors are to be found in the standard programme of the control . It is, therefore, guaranteed that the evaluation of spark alarms as well as the operating of the automatic extinguishing system will be carried out with virtually no delay. Gas detectors A gas detector is an autonomous subsystem that can be easily integrated in the FMZ 4100 fire detection control . Owing to the increasingly complex chemical processes used in industry, gas detection at an early stage is often the main element of a safety scheme and is accordingly very suitable for combination with fire detection and fire systems. A display continuously indicates the gas concentrations in the gas detectors. If the gas concentration measured exceeds a preset limit, external equipment can be activated via secondary control lines. All measured data is ed on to the FMZ 4100 where it is recorded. This assures the traceability of events even after a lengthy period.
Scheme of control FMZ 4100 Fire brigade operating
Report printer Building management system
Serial interface
Alarm and graphics reporting system Repeater Slave control s
Network interface
Operator extinguishing control Manual release Second release Extinguishing delay System monitoring
Field termination card extinguishing system control EMI protection
Multi-zone extinguishing control system
Field termination card for primary control zones EMI protection
Automatic release
CO 2 low pressure system
CO 2 / Argon high pressure system
O • • • • •
FMZ 4100 multi zone CO2 extinguishing control
Fire protection for paint spraying plants
Fire brigade key box
Mimic
Fire brigade main alarm
Operator
Group LEDs
Line card Master U peripheral evaluation and control
Field termination card for detector groups EMI protection
Automatic detectors
Field termination card for primary control groups EMI protection
Optical / acoustic alarm
giving detectors
Trigger solenoid valve Air condition off
Relay control card Slave U 1 evaluation and control
Relay card
Detector identification system System Gas detection Gas line card
Concentration display and operating
Other extinguishing systems • Deluge• Foam-/Powder• Spark• Pre-action Sprinkler• Argon extinguishing system
Minimax detector collection
Machinery off Smoke vent unlock Field termination card detector identification
Detector identification for automatic and giving detectors
EMI protection
Gas detector
Termination and control card
Optical / acoustic alarm Machinery off
Digital system monitoring
Evaluation and control system
Quiescent current monitoring
Detector identification system
Non monitored lines
Extinguishing control system Gas detection system
Fire protection for EDP installations
Repeater
Interface to slave module
Processor card
Master plug-in card
Field termination card detector identification Interface to master module
Detector identification card
Relay card
Relay control card
Extinguishing control card
Fire detection and extinguishing control for 384 groups
Field termination card for detector groups
Field termination card for primary control groups
Line card for 4 automatic, giving and primary control groups
Field termination card for detector groups
Line card for 4 automatic groups
Technical Data Fire Detection Control FMZ 4100 GAB 32, GAB 96, GAB 128 Specific System Data Power supply Operating voltages Control voltage of external devices Emergency power supply Control relay rating Control signal of main alarm Permissible ambient temperature Permissible ambient air humidity Place of installation VdS approval FM approval
230 V /110 V, 50/60 Hz, (+10 %, -15 %) switchable by jumper at power supply 15 V, 12 V, 5 V 24 V DC 24 V DC (2 x 12 V maintenance free and sealed batteries, independent of position, deep-discharge resitant, capacity range application specific) 30 W/60 VA /1.5 A / 250 V 24 V DC, constant or pulses, adjustable from 1 to 10 seconds -5 - +40 °C 12 g /m3 dry operating areas with restricted access G 29013 OY4AO.AY
Specific Data
FMZ 4100 GAB32
FMZ 4100 GAB96
FMZ 4100 GAB128
Max. number of groups Serial interfaces RS 232C Number of control relays with full complement Housing type
32/ 32/ 321 2 80 wall-mounted 15U swivel frame RAL 7032, grey, structured approx. 48 kg IP 42 525 x 709 x 275
96/ 96/ 961 3 224 upright cabinet 31U swivel frame RAL 7032, grey, structured approx. 135 kg IP 54 800 x 1600 x 500
128 /128 /1281 2 296 upright cabinet 40U swivel frame RAL 7032, grey, structured approx. 160 kg IP 54 800 x 2060 x 600
Colour Weight of complete unit (without batteries) IP rating Dimensions in mm (W x H x D) 2 Line cards 3 Automatic detector groups Detection Group voltage Detection Group quiescent current Detection Group alarm current Detection Group terminating resistance Alarm resistance (detector) Permissible max. line resistance Permissible max. number of detectors per group
9V approx. 5 mA ≥ 9 mA (spark extinguishing system: ≥ 15 mA) 4 1800 470 - 1000 50 10 manual call points or 60 sprinkler monitoring modules 5
giving detector groups Detection Group current Detection Group quiescent voltage Detection Group alarm voltage Detection Group terminating zener diode Detection Group alarm zener diode Permissible max. line resistance Permissible max. amount of detectors per groups
approx. 2.2 mA 3.9 - 4.1 V 2.7 V 4 ZPD 4V3 (spark extinguishing system BZX 4V3) ZPD 2V7 (spark extinguishing system BZX 2V4)6 50 10 5
Primary control groups Detection Group current Control voltage Detection Group quiescent voltage Max. load Detection Group terminating resistance
approx. 2.6 mA 24 V DC approx. 2.6 V 2 A ( limited by fuse) 1000 /1 Watt
Fire extinguishing control system
3 4 5 6 7
For 32, 96 or 128 automatic and giving groups and primary control groups Other cabinet sizes available A reduced version can be supplied when only automatic fire alarm groups are required Other current/voltage threshold values programmable VdS standard value For evaluation of different interferences in sparc extinguishing systems, e.g. continuous extinguishing, water supply fault, 3 additional thershold voltage values are monitored Technical data for groups of the extinguishing control system are similar to the line card The right is reserved to modify any specification without prior notice.
Minimax GmbH & Co. KG Industriestrasse 10 /12 23840 Bad Oldesloe Phone: +49 45 31 8 03-0 Fax: +49 45 31 8 03-2 48 E-mail: [email protected] www.minimax.de
VdS Certified acc. to ISO 9001
F 15e/2.96/2/01.05/HMB
2
No. S 89201
1
Printed in Gernmany
4 groups for automatic detectors 7 4 groups for giving detectors 7 4 primary control groups7 8 free programmable relays for non monitored groups
More Documents from "Mohammed Hamza Ahmed" 83k2r
287651884-mx-fire-detection-control--fmz-4100-pdf.pdf v3t3y
November 2021 0
___ Tolerance Data 2013 Free Torrent 6td6b
July 2021 0
Samson Notes 2014 2lc4d
October 2019 155
Ecc 6.0 Ehp7 Upgrade Step By Step Process 5d24
November 2019 69
Rocker Bogie Wikipedia 67122f
December 2019 57